diff options
Diffstat (limited to 'arch')
68 files changed, 216 insertions, 616 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 5da6ff54b3e7..584a6e114853 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -7,6 +7,9 @@ config ALPHA select ARCH_NO_PREEMPT select ARCH_NO_SG_CHAIN select ARCH_USE_CMPXCHG_LOCKREF + select FORCE_PCI if !ALPHA_JENSEN + select PCI_DOMAINS if PCI + select PCI_SYSCALL if PCI select HAVE_AOUT select HAVE_IDE select HAVE_OPROFILE @@ -16,6 +19,7 @@ config ALPHA select NEED_SG_DMA_LENGTH select VIRT_TO_BUS select GENERIC_IRQ_PROBE + select GENERIC_PCI_IOMAP if PCI select AUTO_IRQ_AFFINITY if SMP select GENERIC_IRQ_SHOW select ARCH_WANT_IPC_PARSE_VERSION @@ -126,11 +130,13 @@ choice config ALPHA_GENERIC bool "Generic" depends on TTY + select HAVE_EISA help A generic kernel will run on all supported Alpha hardware. config ALPHA_ALCOR bool "Alcor/Alpha-XLT" + select HAVE_EISA help For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O @@ -203,6 +209,7 @@ config ALPHA_EIGER config ALPHA_JENSEN bool "Jensen" depends on BROKEN + select HAVE_EISA help DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one of the first-generation Alpha systems. A number of these systems @@ -219,6 +226,7 @@ config ALPHA_LX164 config ALPHA_LYNX bool "Lynx" + select HAVE_EISA help AlphaServer 2100A-based systems. @@ -229,6 +237,7 @@ config ALPHA_MARVEL config ALPHA_MIATA bool "Miata" + select HAVE_EISA help The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a, or 600au). @@ -248,6 +257,7 @@ config ALPHA_NONAME_CH config ALPHA_NORITAKE bool "Noritake" + select HAVE_EISA help AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based systems. @@ -260,6 +270,7 @@ config ALPHA_P2K config ALPHA_RAWHIDE bool "Rawhide" + select HAVE_EISA help AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines. See HOWTO at @@ -279,6 +290,7 @@ config ALPHA_SX164 config ALPHA_SABLE bool "Sable" + select HAVE_EISA help Digital AlphaServer 2000 and 2100-based systems. @@ -319,24 +331,6 @@ config ISA_DMA_API bool default y -config PCI - bool - depends on !ALPHA_JENSEN - select GENERIC_PCI_IOMAP - default y - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -config PCI_DOMAINS - bool - default y - -config PCI_SYSCALL - def_bool PCI - config ALPHA_NONAME bool depends on ALPHA_BOOK1 || ALPHA_NONAME_CH @@ -526,11 +520,6 @@ config ALPHA_SRM If unsure, say N. -config EISA - bool - depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE - default y - config ARCH_MAY_HAVE_PC_FDC def_bool y @@ -681,11 +670,6 @@ config HZ default 1200 if HZ_1200 default 1024 -source "drivers/pci/Kconfig" -source "drivers/eisa/Kconfig" - -source "drivers/pcmcia/Kconfig" - config SRM_ENV tristate "SRM environment through procfs" depends on PROC_FS diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index ca8e26d045a9..376366a7db81 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -45,14 +45,12 @@ config ARC select OF select OF_EARLY_FLATTREE select OF_RESERVED_MEM + select PCI_SYSCALL if PCI select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING config ARCH_HAS_CACHE_LINE_SIZE def_bool y -config MIGHT_HAVE_PCI - bool - config TRACE_IRQFLAGS_SUPPORT def_bool y @@ -541,24 +539,4 @@ config FORCE_MAX_ZONEORDER default "12" if ARC_HUGEPAGE_16M default "11" -menu "Bus Support" - -config PCI - bool "PCI support" if MIGHT_HAVE_PCI - help - PCI is the name of a bus system, i.e., the way the CPU talks to - the other stuff inside your box. Find out if your board/platform - has PCI. - - Note: PCIe support for Synopsys Device will be available only - when HAPS DX is configured with PCIe RC bitmap. If you have PCI, - say Y, otherwise N. - -config PCI_SYSCALL - def_bool PCI - -source "drivers/pci/Kconfig" - -endmenu - source "kernel/power/Kconfig" diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig index 4e0df7b7a248..27b9eb97a6bf 100644 --- a/arch/arc/plat-axs10x/Kconfig +++ b/arch/arc/plat-axs10x/Kconfig @@ -11,7 +11,7 @@ menuconfig ARC_PLAT_AXS10X select DW_APB_ICTL select GPIO_DWAPB select OF_GPIO - select MIGHT_HAVE_PCI + select HAVE_PCI select GENERIC_IRQ_CHIP select GPIOLIB select AXS101 if ISA_ARCOMPACT diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index 9356753c2ed8..f25c085b9874 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -11,4 +11,4 @@ menuconfig ARC_SOC_HSDK select ARC_HAS_ACCL_REGS select CLK_HSDK select RESET_HSDK - select MIGHT_HAVE_PCI + select HAVE_PCI diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3a7cce7f80df..a3f436ba554d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -104,6 +104,7 @@ config ARM select OF_RESERVED_MEM if OF select OLD_SIGACTION select OLD_SIGSUSPEND3 + select PCI_SYSCALL if PCI select PERF_USE_VMALLOC select REFCOUNT_FULL select RTC_LIB @@ -147,9 +148,6 @@ config ARM_DMA_IOMMU_ALIGNMENT endif -config MIGHT_HAVE_PCI - bool - config SYS_SUPPORTS_APM_EMULATION bool @@ -163,21 +161,6 @@ config HAVE_PROC_CPU config NO_IOPORT_MAP bool -config EISA - bool - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - config SBUS bool @@ -333,8 +316,8 @@ config ARCH_MULTIPLATFORM select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI + select HAVE_PCI + select PCI_DOMAINS_GENERIC if PCI select SPARSE_IRQ select USE_OF @@ -407,7 +390,7 @@ config ARCH_IOP13XX select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER - select PCI + select FORCE_PCI select PLAT_IOP select VMSPLIT_1G select SPARSE_IRQ @@ -421,7 +404,7 @@ config ARCH_IOP32X select GPIO_IOP select GPIOLIB select NEED_RET_TO_USER - select PCI + select FORCE_PCI select PLAT_IOP help Support for Intel's 80219 and IOP32X (XScale) family of @@ -434,7 +417,7 @@ config ARCH_IOP33X select GPIO_IOP select GPIOLIB select NEED_RET_TO_USER - select PCI + select FORCE_PCI select PLAT_IOP help Support for Intel's IOP33X (XScale) family of processors. @@ -449,7 +432,7 @@ config ARCH_IXP4XX select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS select GPIOLIB - select MIGHT_HAVE_PCI + select HAVE_PCI select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -462,7 +445,7 @@ config ARCH_DOVE select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB - select MIGHT_HAVE_PCI + select HAVE_PCI select MVEBU_MBUS select PINCTRL select PINCTRL_DOVE @@ -1230,46 +1213,18 @@ config ISA_DMA config ISA_DMA_API bool -config PCI - bool "PCI support" if MIGHT_HAVE_PCI - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -config PCI_DOMAINS - bool "Support for multiple PCI domains" - depends on PCI - help - Enable PCI domains kernel management. Say Y if your machine - has a PCI bus hierarchy that requires more than one PCI - domain (aka segment) to be correctly managed. Say N otherwise. - - If you don't know what to do here, say N. - -config PCI_DOMAINS_GENERIC - def_bool PCI_DOMAINS - config PCI_NANOENGINE bool "BSE nanoEngine PCI support" depends on SA1100_NANOENGINE help Enable PCI on the BSE nanoEngine board. -config PCI_SYSCALL - def_bool PCI - config PCI_HOST_ITE8152 bool depends on PCI && MACH_ARMCORE default y select DMABOUNCE -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - endmenu menu "Kernel Features" diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig index e3cbb07fe1b4..bc04c91294cf 100644 --- a/arch/arm/mach-alpine/Kconfig +++ b/arch/arm/mach-alpine/Kconfig @@ -9,7 +9,7 @@ config ARCH_ALPINE select HAVE_ARM_ARCH_TIMER select HAVE_SMP select MFD_SYSCON - select PCI + select FORCE_PCI select PCI_HOST_GENERIC help This enables support for the Annapurna Labs Alpine V1 boards. diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 25aac6ee2ab1..a3f375af673d 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -20,7 +20,7 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL - select PCI_DOMAINS if PCI + select PCI_DOMAINS_GENERIC if PCI help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index cbbdd84cf49a..816a5b89be25 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -9,7 +9,7 @@ config ARCH_CATS select FOOTBRIDGE_HOST select ISA select ISA_DMA - select PCI + select FORCE_PCI help Say Y here if you intend to run this kernel on the CATS. @@ -20,7 +20,7 @@ config ARCH_PERSONAL_SERVER select FOOTBRIDGE_HOST select ISA select ISA_DMA - select PCI + select FORCE_PCI ---help--- Say Y here if you intend to run this kernel on the Compaq Personal Server. @@ -53,7 +53,7 @@ config ARCH_EBSA285_HOST select ISA select ISA_DMA select ARCH_MAY_HAVE_PC_FDC - select PCI + select FORCE_PCI help Say Y here if you intend to run this kernel on the EBSA285 card in host ("central function") mode. @@ -67,7 +67,7 @@ config ARCH_NETWINDER select FOOTBRIDGE_HOST select ISA select ISA_DMA - select PCI + select FORCE_PCI help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index c342dc4e8a45..fea008123eb1 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -7,7 +7,7 @@ comment "IXP4xx Platforms" config MACH_NSLU2 bool prompt "Linksys NSLU2" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Linksys's NSLU2 NAS device. For more information on this platform, @@ -15,7 +15,7 @@ config MACH_NSLU2 config MACH_AVILA bool "Avila" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support the Gateworks Avila Network Platform. For more information on this platform, @@ -31,7 +31,7 @@ config MACH_LOFT config ARCH_ADI_COYOTE bool "Coyote" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support the ADI Engineering Coyote Gateway Reference Platform. For more @@ -39,7 +39,7 @@ config ARCH_ADI_COYOTE config MACH_GATEWAY7001 bool "Gateway 7001" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Gateway's 7001 Access Point. For more information on this platform, @@ -47,7 +47,7 @@ config MACH_GATEWAY7001 config MACH_WG302V2 bool "Netgear WG302 v2 / WAG302 v2" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Netgear's WG302 v2 or WAG302 v2 Access Points. For more information @@ -107,7 +107,7 @@ config ARCH_PRPMC1100 config MACH_NAS100D bool prompt "NAS100D" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Iomega's NAS 100d device. For more information on this platform, @@ -116,7 +116,7 @@ config MACH_NAS100D config MACH_DSMG600 bool prompt "D-Link DSM-G600 RevA" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support D-Link's DSM-G600 RevA device. For more information on this platform, @@ -130,7 +130,7 @@ config ARCH_IXDP4XX config MACH_FSG bool prompt "Freecom FSG-3" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Freecom's FSG-3 device. For more information on this platform, @@ -139,7 +139,7 @@ config MACH_FSG config MACH_ARCOM_VULCAN bool prompt "Arcom/Eurotech Vulcan" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support Arcom's Vulcan board. @@ -160,7 +160,7 @@ config CPU_IXP43X config MACH_GTWX5715 bool "Gemtek WX5715 (Linksys WRV54G)" depends on ARCH_IXP4XX - select PCI + select FORCE_PCI help This board is currently inside the Linksys WRV54G Gateways. @@ -183,7 +183,7 @@ config MACH_DEVIXP config MACH_MICCPT bool "Omicron MICCPT" - select PCI + select FORCE_PCI help Say 'Y' here if you want your kernel to support the MICCPT board from OMICRON electronics GmbH. diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index a545976bdbd6..b3185c05fffa 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations" config MACH_KS8695 bool "KS8695 development board" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to run on the original Kendin-Micrel KS8695 development board. @@ -52,7 +52,7 @@ config MACH_CM4002 config MACH_CM4008 bool "OpenGear CM4008" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4008 Console Server. See http://www.opengear.com for more @@ -60,7 +60,7 @@ config MACH_CM4008 config MACH_CM41xx bool "OpenGear CM41xx" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4016 or CM4048 Console Servers. See http://www.opengear.com for @@ -68,7 +68,7 @@ config MACH_CM41xx config MACH_IM4004 bool "OpenGear IM4004" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4004 Secure Access Server. See http://www.opengear.com for @@ -76,7 +76,7 @@ config MACH_IM4004 config MACH_IM42xx bool "OpenGear IM42xx" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4216 or IM4248 Console Servers. See http://www.opengear.com for diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index 81c0f08a2684..d686a844a790 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -4,7 +4,7 @@ menuconfig ARCH_MV78XX0 select CPU_FEROCEON select GPIOLIB select MVEBU_MBUS - select PCI + select FORCE_PCI select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 2c20599cc350..5d6fbadd7849 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -124,7 +124,7 @@ config MACH_KIRKWOOD select MACH_MVEBU_ANY select ORION_IRQCHIP select ORION_TIMER - select PCI + select FORCE_PCI select PCI_QUIRKS select PINCTRL_KIRKWOOD help diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a810f4dd34b1..38c45a88c793 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,7 +5,7 @@ menuconfig ARCH_ORION5X select GENERIC_CLOCKEVENTS select GPIOLIB select MVEBU_MBUS - select PCI + select FORCE_PCI select PHYLIB if NETDEVICES select PLAT_ORION_LEGACY help diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a68b34183107..b185794549be 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -125,7 +125,7 @@ config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select IWMMXT - select MIGHT_HAVE_PCI + select HAVE_PCI select NEED_MACH_IO_H if PCI select PXA25x select PXA27x diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index fde7ef1ab192..acb2c520ae8b 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -120,7 +120,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" select ARM_SA1110_CPUFREQ - select PCI + select FORCE_PCI select PCI_NANOENGINE help Say Y here if you are using the Bright Star Engineering nanoEngine. diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 4adb901dd5eb..d43798defdba 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,7 +10,7 @@ menuconfig ARCH_SOCFPGA select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select MFD_SYSCON - select PCI_DOMAINS if PCI + select PCI_DOMAINS_GENERIC if PCI if ARCH_SOCFPGA config SOCFPGA_SUSPEND diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 5c02802f0493..a4168d366127 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -102,6 +102,7 @@ config ARM64 select GENERIC_TIME_VSYSCALL select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND + select HAVE_PCI select HAVE_ACPI_APEI if (ACPI && EFI) select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_AUDITSYSCALL @@ -163,7 +164,9 @@ config ARM64 select OF select OF_EARLY_FLATTREE select OF_RESERVED_MEM + select PCI_DOMAINS_GENERIC if PCI select PCI_ECAM if (ACPI && PCI) + select PCI_SYSCALL if PCI select POWER_RESET select POWER_SUPPLY select REFCOUNT_FULL @@ -290,28 +293,6 @@ config ARCH_PROC_KCORE_TEXT source "arch/arm64/Kconfig.platforms" -menu "Bus support" - -config PCI - bool "PCI support" - help - This feature enables support for PCI bus system. If you say Y - here, the kernel will include drivers and infrastructure code - to support PCI bus devices. - -config PCI_DOMAINS - def_bool PCI - -config PCI_DOMAINS_GENERIC - def_bool PCI - -config PCI_SYSCALL - def_bool PCI - -source "drivers/pci/Kconfig" - -endmenu - menu "Kernel Features" menu "ARM errata workarounds via the alternatives framework" diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index d71036c598de..fb2fbfcfc532 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -46,9 +46,6 @@ config FRAME_POINTER config LOCKDEP_SUPPORT def_bool y -config PCI - def_bool n - config EARLY_PRINTK def_bool y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 74638de8091d..ccd56f5df8cd 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -10,11 +10,13 @@ config IA64 bool select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO - select PCI if (!IA64_HP_SIM) select ACPI if (!IA64_HP_SIM) select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM) select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI + select FORCE_PCI if (!IA64_HP_SIM) + select PCI_DOMAINS if PCI + select PCI_SYSCALL if PCI select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_EXIT_THREAD select HAVE_IDE @@ -540,30 +542,6 @@ endif endmenu -if !IA64_HP_SIM - -menu "Bus options (PCI, PCMCIA)" - -config PCI - bool "PCI support" - help - Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y - here unless you are using a simulator without PCI support. - -config PCI_DOMAINS - def_bool PCI - -config PCI_SYSCALL - def_bool PCI - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -endmenu - -endif - source "arch/ia64/hp/sim/Kconfig" config MSPEC diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index aef698fa50e5..9d0a3a23d50e 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -63,22 +63,9 @@ source "drivers/zorro/Kconfig" endif -config PCI - bool "PCI support" - depends on M54xx - help - Enable the PCI bus. Support for the PCI bus hardware built into the - ColdFire 547x and 548x processors. - -if PCI -source "drivers/pci/Kconfig" -endif - if !MMU config ISA_DMA_API def_bool !M5272 -source "drivers/pcmcia/Kconfig" - endif diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 21f00349af52..60ac1cd8b96f 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -299,6 +299,7 @@ config M53xx bool config M54xx + select HAVE_PCI bool endif # COLDFIRE diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index eda9e2315ef5..58aff2653d86 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -29,11 +29,14 @@ config MICROBLAZE select HAVE_FUNCTION_TRACER select HAVE_MEMBLOCK_NODE_MAP select HAVE_OPROFILE + select HAVE_PCI select IRQ_DOMAIN select XILINX_INTC select MODULES_USE_ELF_RELA select OF select OF_EARLY_FLATTREE + select PCI_DOMAINS_GENERIC if PCI + select PCI_SYSCALL if PCI select TRACING_SUPPORT select VIRT_TO_BUS select CPU_NO_EFFICIENT_FFS @@ -265,22 +268,8 @@ endmenu menu "Bus Options" -config PCI - bool "PCI support" - -config PCI_DOMAINS - def_bool PCI - -config PCI_DOMAINS_GENERIC - def_bool PCI_DOMAINS - -config PCI_SYSCALL - def_bool PCI - config PCI_XILINX bool "Xilinx PCI host bridge support" depends on PCI -source "drivers/pci/Kconfig" - endmenu diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 63183a8454d6..787290781b8c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -25,6 +25,7 @@ config MIPS select GENERIC_IOMAP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_ISA_DMA if EISA select GENERIC_LIB_ASHLDI3 select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_CMPDI2 @@ -74,6 +75,7 @@ config MIPS select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP select IRQ_FORCED_THREADING + select ISA if EISA select MODULES_USE_ELF_RELA if MODULES && 64BIT select MODULES_USE_ELF_REL if MODULES select PERF_USE_VMALLOC @@ -98,7 +100,7 @@ config MIPS_GENERIC select CPU_MIPSR2_IRQ_EI select CSRC_R4K select DMA_PERDEV_COHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select LIBFDT select MIPS_AUTO_PFN_OFFSET @@ -259,7 +261,7 @@ config BCM47XX select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select NO_EXCEPT_FILL @@ -302,13 +304,12 @@ config MIPS_COBALT select CSRC_R4K select CEVT_GT641XX select DMA_NONCOHERENT - select HW_HAS_PCI + select FORCE_PCI select I8253 select I8259 select IRQ_MIPS_CPU select IRQ_GT641XX select PCI_GT64XXX_PCI0 - select PCI select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL @@ -425,7 +426,7 @@ config LASAT select CSRC_R4K select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select PCI_GT64XXX_PCI0 select MIPS_NILE4 @@ -503,7 +504,7 @@ config MIPS_MALTA select DMA_MAYBE_COHERENT select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM - select HW_HAS_PCI + select HAVE_PCI select I8253 select I8259 select IRQ_MIPS_CPU @@ -557,7 +558,7 @@ config MACH_PIC32 config NEC_MARKEINS bool "NEC EMMA2RH Mark-eins board" select SOC_EMMA2RH - select HW_HAS_PCI + select HAVE_PCI help This enables support for the NEC Electronics Mark-eins boards. @@ -634,7 +635,7 @@ config SGI_IP22 select CSRC_R4K select DEFAULT_SGI_PARTITION select DMA_NONCOHERENT - select HW_HAS_EISA + select HAVE_EISA select I8253 select I8259 select IP22_CPU_SCACHE @@ -674,7 +675,7 @@ config SGI_IP27 select BOOT_ELF64 select DEFAULT_SGI_PARTITION select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI + select HAVE_PCI select NR_CPUS_DEFAULT_64 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL @@ -699,7 +700,7 @@ config SGI_IP28 select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN select IRQ_MIPS_CPU - select HW_HAS_EISA + select HAVE_EISA select I8253 select I8259 select SGI_HAS_I8042 @@ -734,7 +735,7 @@ config SGI_IP32 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select R5000_CPU_SCACHE select RM7000_CPU_SCACHE @@ -846,9 +847,9 @@ config SNI_RM select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN select DMA_NONCOHERENT select GENERIC_ISA_DMA + select HAVE_EISA select HAVE_PCSPKR_PLATFORM - select HW_HAS_EISA - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select I8253 select I8259 @@ -881,7 +882,7 @@ config MIKROTIK_RB532 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL @@ -898,7 +899,7 @@ config CAVIUM_OCTEON_SOC bool "Cavium Networks Octeon SoC based boards" select CEVT_R4K select ARCH_HAS_PHYS_TO_DMA - select HAS_RAPIDIO + select HAVE_RAPIDIO select PHYS_ADDR_T_64BIT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -908,7 +909,7 @@ config CAVIUM_OCTEON_SOC select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON - select HW_HAS_PCI + select HAVE_PCI select ZONE_DMA32 select HOLES_IN_ZONE select GPIOLIB @@ -941,7 +942,7 @@ config NLM_XLR_BOARD select NLM_COMMON select SYS_HAS_CPU_XLR select SYS_SUPPORTS_SMP - select HW_HAS_PCI + select HAVE_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -967,7 +968,7 @@ config NLM_XLP_BOARD select NLM_COMMON select SYS_HAS_CPU_XLP select SYS_SUPPORTS_SMP - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select PHYS_ADDR_T_64BIT @@ -1002,7 +1003,7 @@ config MIPS_PARAVIRT select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS64_R2 select SYS_HAS_CPU_CAVIUM_OCTEON - select HW_HAS_PCI + select HAVE_PCI select SWAP_IO_SPACE help This option supports guest running under ???? @@ -3063,47 +3064,14 @@ config MIPS_AUTO_PFN_OFFSET menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" -config HW_HAS_EISA - bool -config HW_HAS_PCI - bool - -config PCI - bool "Support for PCI controller" - depends on HW_HAS_PCI - select PCI_DOMAINS - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, - say Y, otherwise N. - -config HT_PCI - bool "Support for HT-linked PCI" - default y - depends on CPU_LOONGSON3 - select PCI - select PCI_DOMAINS - help - Loongson family machines use Hyper-Transport bus for inter-core - connection and device connection. The PCI bus is a subordinate - linked at HT. Choose Y for Loongson-3 based machines. - -config PCI_DOMAINS - bool - -config PCI_DOMAINS_GENERIC - bool - config PCI_DRIVERS_GENERIC - select PCI_DOMAINS_GENERIC if PCI_DOMAINS + select PCI_DOMAINS_GENERIC if PCI bool config PCI_DRIVERS_LEGACY def_bool !PCI_DRIVERS_GENERIC select NO_GENERIC_PCI_IOPORT_MAP - -source "drivers/pci/Kconfig" + select PCI_DOMAINS if PCI # # ISA support is now enabled via select. Too many systems still have the one @@ -3113,26 +3081,6 @@ source "drivers/pci/Kconfig" config ISA bool -config EISA - bool "EISA support" - depends on HW_HAS_EISA - select ISA - select GENERIC_ISA_DMA - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -source "drivers/eisa/Kconfig" - config TC bool "TURBOchannel support" depends on MACH_DECSTATION @@ -3176,21 +3124,6 @@ config ZONE_DMA config ZONE_DMA32 bool -source "drivers/pcmcia/Kconfig" - -config HAS_RAPIDIO - bool - default n - -config RAPIDIO - tristate "RapidIO support" - depends on HAS_RAPIDIO || PCI - help - If you say Y here, the kernel will include drivers and - infrastructure code to support RapidIO interconnect devices. - -source "drivers/rapidio/Kconfig" - endmenu config TRAD_SIGNALS diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 7d73f7f4202b..83b288b95b16 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -14,7 +14,7 @@ choice config MIPS_MTX1 bool "4G Systems MTX-1 board" - select HW_HAS_PCI + select HAVE_PCI select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -22,7 +22,7 @@ config MIPS_MTX1 config MIPS_DB1XXX bool "Alchemy DB1XXX / PB1XXX boards" select GPIOLIB - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK help @@ -40,7 +40,7 @@ config MIPS_XXS1500 config MIPS_GPR bool "Trapeze ITS GPR board" select ALCHEMY_GPIOINT_AU1000 - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig index 2c1dfd06c366..3014c80cf581 100644 --- a/arch/mips/ath25/Kconfig +++ b/arch/mips/ath25/Kconfig @@ -13,6 +13,5 @@ config PCI_AR2315 bool "Atheros AR2315 PCI controller support" depends on SOC_AR2315 select ARCH_HAS_PHYS_TO_DMA - select HW_HAS_PCI - select PCI + select FORCE_PCI default y diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index 9547cf1ea38d..191c3910eac5 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -75,11 +75,11 @@ config ATH79_MACH_UBNT_XM endmenu config SOC_AR71XX - select HW_HAS_PCI + select HAVE_PCI def_bool n config SOC_AR724X - select HW_HAS_PCI + select HAVE_PCI select PCI_AR724X if PCI def_bool n @@ -90,12 +90,12 @@ config SOC_AR933X def_bool n config SOC_AR934X - select HW_HAS_PCI + select HAVE_PCI select PCI_AR724X if PCI def_bool n config SOC_QCA955X - select HW_HAS_PCI + select HAVE_PCI select PCI_AR724X if PCI def_bool n diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig index 96ed735a4f4a..837f6e5a2f37 100644 --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig @@ -5,17 +5,17 @@ menu "CPU support" config BCM63XX_CPU_3368 bool "support 3368 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6328 bool "support 6328 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6338 bool "support 6338 CPU" select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6345 bool "support 6345 CPU" @@ -24,22 +24,22 @@ config BCM63XX_CPU_6345 config BCM63XX_CPU_6348 bool "support 6348 CPU" select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6358 bool "support 6358 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6362 bool "support 6362 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6368 bool "support 6368 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI endmenu source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h index d0ae5d55413b..b6870fec0f99 100644 --- a/arch/mips/include/asm/mach-loongson64/loongson.h +++ b/arch/mips/include/asm/mach-loongson64/loongson.h @@ -113,7 +113,7 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ #define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) -#if defined(CONFIG_HT_PCI) +#ifdef CONFIG_CPU_LOONGSON3 #define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base #else #define LOONGSON_PCIIO_BASE 0x1fd00000 diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 8e3a1fc2bc39..188de95d6dbd 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -19,7 +19,7 @@ config SOC_AMAZON_SE config SOC_XWAY bool "XWAY" select SOC_TYPE_XWAY - select HW_HAS_PCI + select HAVE_PCI select MFD_SYSCON select MFD_CORE diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index c865b4b9b775..4c14a11525f4 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -15,7 +15,7 @@ config LEMOTE_FULOONG2E select DMA_NONCOHERENT select BOOT_ELF32 select BOARD_SCACHE - select HW_HAS_PCI + select HAVE_PCI select I8259 select ISA select IRQ_MIPS_CPU @@ -46,7 +46,7 @@ config LEMOTE_MACH2F select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN select HAVE_CLK - select HW_HAS_PCI + select HAVE_PCI select I8259 select IRQ_MIPS_CPU select ISA @@ -74,9 +74,8 @@ config LOONGSON_MACH3X select CSRC_R4K select CEVT_R4K select CPU_HAS_WB - select HW_HAS_PCI + select FORCE_PCI select ISA - select HT_PCI select I8259 select IRQ_MIPS_CPU select NR_CPUS_DEFAULT_4 diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig index d319bc0c3df6..b185b7620c97 100644 --- a/arch/mips/pmcs-msp71xx/Kconfig +++ b/arch/mips/pmcs-msp71xx/Kconfig @@ -6,25 +6,25 @@ choice config PMC_MSP4200_EVAL bool "PMC-Sierra MSP4200 Eval Board" select IRQ_MSP_SLP - select HW_HAS_PCI + select HAVE_PCI select MIPS_L1_CACHE_SHIFT_4 config PMC_MSP4200_GW bool "PMC-Sierra MSP4200 VoIP Gateway" select IRQ_MSP_SLP - select HW_HAS_PCI + select HAVE_PCI config PMC_MSP7120_EVAL bool "PMC-Sierra MSP7120 Eval Board" select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC - select HW_HAS_PCI + select HAVE_PCI config PMC_MSP7120_GW bool "PMC-Sierra MSP7120 Residential Gateway" select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC - select HW_HAS_PCI + select HAVE_PCI select MSP_HAS_USB select MSP_ETH @@ -32,7 +32,7 @@ config PMC_MSP7120_FPGA bool "PMC-Sierra MSP7120 FPGA" select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC - select HW_HAS_PCI + select HAVE_PCI endchoice diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index 1f9cb0e3c79a..4c8006b4a5f7 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -27,18 +27,18 @@ choice config SOC_RT288X bool "RT288x" select MIPS_L1_CACHE_SHIFT_4 - select HW_HAS_PCI + select HAVE_PCI config SOC_RT305X bool "RT305x" config SOC_RT3883 bool "RT3883" - select HW_HAS_PCI + select HAVE_PCI config SOC_MT7620 bool "MT7620/8" - select HW_HAS_PCI + select HAVE_PCI config SOC_MT7621 bool "MT7621" @@ -50,7 +50,7 @@ choice select MIPS_GIC select COMMON_CLK select CLKSRC_MIPS_GIC - select HW_HAS_PCI + select HAVE_PCI endchoice choice diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index 7ec278d72096..470d46183677 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -3,7 +3,7 @@ config SIBYTE_SB1250 bool select CEVT_SB1250 select CSRC_SB1250 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_ENABLE_LDT_IF_PCI select SIBYTE_HAS_ZBUS_PROFILING @@ -23,7 +23,7 @@ config SIBYTE_BCM1125 bool select CEVT_SB1250 select CSRC_SB1250 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_HAS_ZBUS_PROFILING @@ -33,7 +33,7 @@ config SIBYTE_BCM1125H bool select CEVT_SB1250 select CSRC_SB1250 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_ENABLE_LDT_IF_PCI @@ -52,7 +52,7 @@ config SIBYTE_BCM1x80 bool select CEVT_BCM1480 select CSRC_BCM1480 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC @@ -62,7 +62,7 @@ config SIBYTE_BCM1x55 bool select CEVT_BCM1480 select CSRC_BCM1480 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_SB1xxx_SOC select SIBYTE_HAS_ZBUS_PROFILING diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index d2509c93f0ee..9a22a182b7a4 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -59,7 +59,7 @@ config SOC_TX3927 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select IRQ_TXX9 select GPIO_TXX9 @@ -67,7 +67,7 @@ config SOC_TX4927 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 @@ -77,7 +77,7 @@ config SOC_TX4938 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 @@ -87,7 +87,7 @@ config SOC_TX4939 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select PCI_TX4927 select HAS_TXX9_ACLC diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 992c988b83b0..e0b651db371d 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -30,7 +30,7 @@ config TANBAC_TB022X select CSRC_R4K select DMA_NONCOHERENT select IRQ_MIPS_CPU - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN help @@ -46,7 +46,7 @@ config VICTOR_MPC30X select CSRC_R4K select DMA_NONCOHERENT select IRQ_MIPS_CPU - select HW_HAS_PCI + select HAVE_PCI select PCI_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -57,7 +57,7 @@ config ZAO_CAPCELLA select CSRC_R4K select DMA_NONCOHERENT select IRQ_MIPS_CPU - select HW_HAS_PCI + select HAVE_PCI select PCI_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -99,6 +99,6 @@ endchoice config PCI_VR41XX bool "Add PCI control unit support of NEC VR4100 series" - depends on MACH_VR41XX && HW_HAS_PCI + depends on MACH_VR41XX && HAVE_PCI default y select PCI diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 6e1b71da0e71..7ca2c3ebad64 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -18,6 +18,7 @@ config PARISC select INIT_ALL_POSSIBLE select BUG select BUILDTIME_EXTABLE_SORT + select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_GZIP diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 285fefcf512a..2890d36eb531 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -168,6 +168,7 @@ config PPC select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL + select GENERIC_PCI_IOMAP if PCI select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER @@ -235,6 +236,8 @@ config PPC select OF_RESERVED_MEM select OLD_SIGACTION if PPC32 select OLD_SIGSUSPEND + select PCI_DOMAINS if PCI + select PCI_SYSCALL if PCI select RTC_LIB select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE @@ -879,9 +882,6 @@ config PPC_INDIRECT_PCI depends on PCI default y if 40x || 44x -config EISA - bool - config SBUS bool @@ -926,59 +926,20 @@ config FSL_GTM help Freescale General-purpose Timers support -# Platforms that what PCI turned unconditionally just do select PCI -# in their config node. Platforms that want to choose at config -# time should select PPC_PCI_CHOICE -config PPC_PCI_CHOICE - bool - -config PCI - bool "PCI support" if PPC_PCI_CHOICE - default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \ - && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON - select GENERIC_PCI_IOMAP - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - -config PCI_DOMAINS - def_bool PCI - -config PCI_SYSCALL - def_bool PCI - config PCI_8260 bool depends on PCI && 8260 select PPC_INDIRECT_PCI default y -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -config HAS_RAPIDIO - bool - -config RAPIDIO - tristate "RapidIO support" - depends on HAS_RAPIDIO || PCI - help - If you say Y here, the kernel will include drivers and - infrastructure code to support RapidIO interconnect devices. - config FSL_RIO bool "Freescale Embedded SRIO Controller support" - depends on RAPIDIO = y && HAS_RAPIDIO + depends on RAPIDIO = y && HAVE_RAPIDIO default "n" ---help--- Include support for RapidIO controller on Freescale embedded processors (MPC8548, MPC8641, etc). -source "drivers/rapidio/Kconfig" - endmenu config NONSTATIC_KERNEL diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 5326ece36120..ad2bb1408b4c 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -11,7 +11,7 @@ config EP405 bool "EP405/EP405PC" depends on 40x select 405GP - select PCI + select FORCE_PCI help This option enables support for the EP405/EP405PC boards. @@ -19,7 +19,7 @@ config HOTFOOT bool "Hotfoot" depends on 40x select PPC40x_SIMPLE - select PCI + select FORCE_PCI help This option enables support for the ESTEEM 195E Hotfoot board. @@ -29,7 +29,7 @@ config KILAUEA select 405EX select PPC40x_SIMPLE select PPC4xx_PCI_EXPRESS - select PCI + select FORCE_PCI select PCI_MSI select PPC4xx_MSI help @@ -39,7 +39,7 @@ config MAKALU bool "Makalu" depends on 40x select 405EX - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS select PPC40x_SIMPLE help @@ -50,7 +50,7 @@ config WALNUT depends on 40x default y select 405GP - select PCI + select FORCE_PCI select OF_RTC help This option enables support for the IBM PPC405GP evaluation board. diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 9a85d350b1b6..4a9a72d01c3c 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -12,7 +12,7 @@ config BAMBOO depends on 44x select PPC44x_SIMPLE select 440EP - select PCI + select FORCE_PCI help This option enables support for the IBM PPC440EP evaluation board. @@ -21,7 +21,7 @@ config BLUESTONE depends on 44x select PPC44x_SIMPLE select APM821xx - select PCI + select FORCE_PCI select PCI_MSI select PPC4xx_MSI select PPC4xx_PCI_EXPRESS @@ -34,7 +34,7 @@ config EBONY depends on 44x default y select 440GP - select PCI + select FORCE_PCI select OF_RTC help This option enables support for the IBM PPC440GP evaluation board. @@ -43,7 +43,7 @@ config SAM440EP bool "Sam440ep" depends on 44x select 440EP - select PCI + select FORCE_PCI help This option enables support for the ACube Sam440ep board. @@ -60,7 +60,7 @@ config TAISHAN depends on 44x select PPC44x_SIMPLE select 440GX - select PCI + select FORCE_PCI help This option enables support for the AMCC PPC440GX "Taishan" evaluation board. @@ -70,7 +70,7 @@ config KATMAI depends on 44x select PPC44x_SIMPLE select 440SPe - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS select PCI_MSI select PPC4xx_MSI @@ -82,7 +82,7 @@ config RAINIER depends on 44x select PPC44x_SIMPLE select 440GRX - select PCI + select FORCE_PCI help This option enables support for the AMCC PPC440GRX evaluation board. @@ -103,7 +103,7 @@ config ARCHES depends on 44x select PPC44x_SIMPLE select 460EX # Odd since it uses 460GT but the effects are the same - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS help This option enables support for the AMCC Dual PPC460GT evaluation board. @@ -112,7 +112,7 @@ config CANYONLANDS bool "Canyonlands" depends on 44x select 460EX - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS select PCI_MSI select PPC4xx_MSI @@ -126,7 +126,7 @@ config GLACIER depends on 44x select PPC44x_SIMPLE select 460EX # Odd since it uses 460GT but the effects are the same - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS select IBM_EMAC_RGMII if IBM_EMAC select IBM_EMAC_ZMII if IBM_EMAC @@ -138,7 +138,7 @@ config REDWOOD depends on 44x select PPC44x_SIMPLE select 460SX - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS select PCI_MSI select PPC4xx_MSI @@ -150,7 +150,7 @@ config EIGER depends on 44x select PPC44x_SIMPLE select 460SX - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS select IBM_EMAC_RGMII if IBM_EMAC help @@ -161,7 +161,7 @@ config YOSEMITE depends on 44x select PPC44x_SIMPLE select 440EP - select PCI + select FORCE_PCI help This option enables support for the AMCC PPC440EP evaluation board. @@ -201,7 +201,7 @@ config AKEBONO select SWIOTLB select 476FPE select PPC4xx_PCI_EXPRESS - select PCI + select FORCE_PCI select PCI_MSI select PPC4xx_HSTA_MSI select I2C @@ -226,7 +226,7 @@ config ICON depends on 44x select PPC44x_SIMPLE select 440SPe - select PCI + select FORCE_PCI select PPC4xx_PCI_EXPRESS help This option enables support for the AMCC PPC440SPe evaluation board. @@ -250,7 +250,7 @@ config XILINX_VIRTEX440_GENERIC_BOARD config XILINX_ML510 bool "Xilinx ML510 extra support" depends on XILINX_VIRTEX440_GENERIC_BOARD - select PPC_PCI_CHOICE + select HAVE_PCI select XILINX_PCI if PCI select PPC_INDIRECT_PCI if PCI select PPC_I8259 if PCI diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 0c495823152c..deecede78776 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -5,7 +5,7 @@ config PPC_MPC512x select COMMON_CLK select FSL_SOC select IPIC - select PPC_PCI_CHOICE + select HAVE_PCI select FSL_PCI if PCI select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 67f8c2d8fc0e..99d60acc20c8 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -3,7 +3,7 @@ config PPC_MPC52xx bool "52xx-based boards" depends on PPC_BOOK3S_32 select COMMON_CLK - select PPC_PCI_CHOICE + select HAVE_PCI config PPC_MPC5200_SIMPLE bool "Generic support for simple MPC5200 based boards" diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index ff0c69dfdf1a..bee119725f61 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,7 @@ menuconfig PPC_83xx bool "83xx-based boards" depends on PPC_BOOK3S_32 select PPC_UDBG_16550 - select PPC_PCI_CHOICE + select HAVE_PCI select FSL_PCI if PCI select FSL_SOC select IPIC diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 68920d42b4bc..d1af0ee2f8c8 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -5,7 +5,7 @@ menuconfig FSL_SOC_BOOKE select FSL_SOC select PPC_UDBG_16550 select MPIC - select PPC_PCI_CHOICE + select HAVE_PCI select FSL_PCI if PCI select SERIAL_8250_EXTENDED if SERIAL_8250 select SERIAL_8250_SHARE_IRQ if SERIAL_8250 @@ -66,7 +66,7 @@ config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE select PPC_I8259 - select HAS_RAPIDIO + select HAVE_RAPIDIO help This option enables support for the MPC85xx CDS board @@ -74,7 +74,7 @@ config MPC85xx_MDS bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE select PHYLIB if NETDEVICES - select HAS_RAPIDIO + select HAVE_RAPIDIO select SWIOTLB help This option enables support for the MPC85xx MDS board @@ -219,7 +219,7 @@ config PPA8548 help This option enables support for the Prodrive PPA8548 board. select DEFAULT_UIMAGE - select HAS_RAPIDIO + select HAVE_RAPIDIO config GE_IMP3A bool "GE Intelligent Platforms IMP3A" @@ -277,7 +277,7 @@ config CORENET_GENERIC select SWIOTLB select GPIOLIB select GPIO_MPC8XXX - select HAS_RAPIDIO + select HAVE_RAPIDIO select PPC_EPAPR_HV_PIC help This option enables support for the FSL CoreNet based boards. diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index df692aa6b578..0a610114bc38 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -15,7 +15,7 @@ config MPC8641_HPCN select PPC_I8259 select DEFAULT_UIMAGE select FSL_ULI1575 if PCI - select HAS_RAPIDIO + select HAVE_RAPIDIO select SWIOTLB help This option enables support for the MPC8641 HPCN board. @@ -57,7 +57,7 @@ config GEF_SBC610 select MMIO_NVRAM select GPIOLIB select GE_FPGA - select HAS_RAPIDIO + select HAVE_RAPIDIO help This option enables support for the GE SBC610. @@ -70,7 +70,7 @@ endif config MPC8641 bool - select PPC_PCI_CHOICE + select HAVE_PCI select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC @@ -79,7 +79,7 @@ config MPC8641 config MPC8610 bool - select PPC_PCI_CHOICE + select HAVE_PCI select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 5c48dd823e15..f3fb79fccc72 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -265,7 +265,7 @@ config CPM2 bool "Enable support for the CPM2 (Communications Processor Module)" depends on (FSL_SOC_BOOKE && PPC32) || 8260 select CPM - select PPC_PCI_CHOICE + select HAVE_PCI select GPIOLIB help The CPM2 (Communications Processor Module) is a coprocessor on diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index ab176fd3dfb5..8c7464c3f27f 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -40,14 +40,14 @@ config 40x select PPC_DCR_NATIVE select PPC_UDBG_16550 select 4xx_SOC - select PPC_PCI_CHOICE + select HAVE_PCI config 44x bool "AMCC 44x, 46x or 47x" select PPC_DCR_NATIVE select PPC_UDBG_16550 select 4xx_SOC - select PPC_PCI_CHOICE + select HAVE_PCI select PHYS_64BIT config E200 diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig index e03d26d41957..0741edb10b7b 100644 --- a/arch/powerpc/platforms/amigaone/Kconfig +++ b/arch/powerpc/platforms/amigaone/Kconfig @@ -5,7 +5,7 @@ config AMIGAONE select PPC_I8259 select PPC_INDIRECT_PCI select PPC_UDBG_16550 - select PCI + select FORCE_PCI select NOT_COHERENT_CACHE select CHECK_CACHE_COHERENCY select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 4b2f114f3116..0f7c8241912b 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -27,7 +27,7 @@ config PPC_IBM_CELL_BLADE depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN select PPC_CELL_NATIVE select PPC_OF_PLATFORM_PCI - select PCI + select FORCE_PCI select MMIO_NVRAM select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig index 43a2484aad49..9b5c5505718a 100644 --- a/arch/powerpc/platforms/chrp/Kconfig +++ b/arch/powerpc/platforms/chrp/Kconfig @@ -12,5 +12,5 @@ config PPC_CHRP select PPC_MPC106 select PPC_UDBG_16550 select PPC_NATIVE - select PCI + select FORCE_PCI default y diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 527d4aa46537..c1920961f410 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -52,7 +52,7 @@ config MVME5100 bool "Motorola/Emerson MVME5100" depends on EMBEDDED6xx select MPIC - select PCI + select FORCE_PCI select PPC_INDIRECT_PCI select PPC_I8259 select PPC_NATIVE @@ -63,7 +63,7 @@ config MVME5100 config TSI108_BRIDGE bool - select PCI + select FORCE_PCI select MPIC select MPIC_WEIRD diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig index 2601fac50354..08d530a2a8b1 100644 --- a/arch/powerpc/platforms/maple/Kconfig +++ b/arch/powerpc/platforms/maple/Kconfig @@ -2,7 +2,7 @@ config PPC_MAPLE depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN bool "Maple 970FX Evaluation Board" - select PCI + select FORCE_PCI select MPIC select U3_DART select MPIC_U3_HT_IRQS diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index 98e3bc22bebc..c52731a7773f 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -3,7 +3,7 @@ config PPC_PASEMI depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN bool "PA Semi SoC-based platforms" select MPIC - select PCI + select FORCE_PCI select PPC_UDBG_16550 select PPC_NATIVE select MPIC_BROKEN_REGREAD diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig index fc90cb35cea3..f834a19ed772 100644 --- a/arch/powerpc/platforms/powermac/Kconfig +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -3,7 +3,7 @@ config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_BOOK3S && CPU_BIG_ENDIAN select MPIC - select PCI + select FORCE_PCI select PPC_INDIRECT_PCI if PPC32 select PPC_MPC106 if PPC32 select PPC_NATIVE diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig index 99083fe992d5..850eee860cf2 100644 --- a/arch/powerpc/platforms/powernv/Kconfig +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -7,7 +7,7 @@ config PPC_POWERNV select PPC_ICP_NATIVE select PPC_XIVE_NATIVE select PPC_P7_NAP - select PCI + select FORCE_PCI select PCI_MSI select EPAPR_BOOT select PPC_INDIRECT_PIO diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 24864b8aaf5d..e32406e918d0 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -6,7 +6,7 @@ config PPC_PS3 select USB_OHCI_LITTLE_ENDIAN select USB_OHCI_BIG_ENDIAN_MMIO select USB_EHCI_BIG_ENDIAN_MMIO - select PPC_PCI_CHOICE + select HAVE_PCI help This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. Enabling this diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 472b784f01eb..9c6b3d860518 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -5,7 +5,7 @@ config PPC_PSERIES select HAVE_PCSPKR_PLATFORM select MPIC select OF_DYNAMIC - select PCI + select FORCE_PCI select PCI_MSI select PPC_XICS select PPC_XIVE_SPAPR diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index a1aade822927..e0d7d61779a6 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -38,8 +38,11 @@ config RISCV select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE select HAVE_ARCH_TRACEHOOK + select HAVE_PCI select MODULES_USE_ELF_RELA if MODULES select THREAD_INFO_IN_TASK + select PCI_DOMAINS_GENERIC if PCI + select PCI_MSI if PCI select RISCV_TIMER select GENERIC_IRQ_MULTI_HANDLER select ARCH_HAS_PTE_SPECIAL @@ -272,28 +275,6 @@ endchoice endmenu -menu "Bus support" - -config PCI - bool "PCI support" - select PCI_MSI - help - This feature enables support for PCI bus system. If you say Y - here, the kernel will include drivers and infrastructure code - to support PCI bus devices. - - If you don't know what to do here, say Y. - -config PCI_DOMAINS - def_bool PCI - -config PCI_DOMAINS_GENERIC - def_bool PCI - -source "drivers/pci/Kconfig" - -endmenu - menu "Power management options" source "kernel/power/Kconfig" diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 6e9c66b3f054..ed554b09eb3f 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -166,14 +166,21 @@ config S390 select HAVE_MOD_ARCH_SPECIFIC select HAVE_NOP_MCOUNT select HAVE_OPROFILE + select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RSEQ select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING + select IOMMU_HELPER if PCI + select IOMMU_SUPPORT if PCI select MODULES_USE_ELF_RELA + select NEED_DMA_MAP_STATE if PCI + select NEED_SG_DMA_LENGTH if PCI select OLD_SIGACTION select OLD_SIGSUSPEND3 + select PCI_DOMAINS if PCI + select PCI_MSI if PCI select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK @@ -704,17 +711,6 @@ config QDIO If unsure, say Y. -menuconfig PCI - bool "PCI support" - select PCI_MSI - select IOMMU_HELPER - select IOMMU_SUPPORT - select NEED_DMA_MAP_STATE - select NEED_SG_DMA_LENGTH - - help - Enable PCI support. - if PCI config PCI_NR_FUNCTIONS @@ -725,13 +721,8 @@ config PCI_NR_FUNCTIONS This allows you to specify the maximum number of PCI functions which this kernel will support. -source "drivers/pci/Kconfig" - endif # PCI -config PCI_DOMAINS - def_bool PCI - config HAS_IOMEM def_bool PCI @@ -835,9 +826,6 @@ source "kernel/power/Kconfig" endmenu -config PCMCIA - def_bool n - config CCW def_bool y diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 34c97f051c1e..a9c36f95744a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -39,13 +39,16 @@ config SUPERH select GENERIC_IDLE_POLL_SETUP select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST + select GENERIC_PCI_IOMAP if PCI select GENERIC_SCHED_CLOCK select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER select MODULES_USE_ELF_RELA + select NO_GENERIC_PCI_IOPORT_MAP if PCI select OLD_SIGSUSPEND select OLD_SIGACTION + select PCI_DOMAINS if PCI select HAVE_ARCH_AUDITSYSCALL select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_NMI @@ -129,9 +132,6 @@ config SYS_SUPPORTS_SMP config SYS_SUPPORTS_NUMA bool -config SYS_SUPPORTS_PCI - bool - config STACKTRACE_SUPPORT def_bool y @@ -854,24 +854,6 @@ config MAPLE Dreamcast with a serial line terminal or a remote network connection. -config PCI - bool "PCI support" - depends on SYS_SUPPORTS_PCI - select PCI_DOMAINS - select GENERIC_PCI_IOMAP - select NO_GENERIC_PCI_IOPORT_MAP - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you have PCI, say Y, otherwise N. - -config PCI_DOMAINS - bool - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - endmenu menu "Power management options (EXPERIMENTAL)" diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 6394b4f0a69b..b9a37057b77a 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -101,7 +101,7 @@ config SH_7751_SOLUTION_ENGINE config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI + select HAVE_PCI depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 @@ -129,7 +129,7 @@ config SH_HP6XX config SH_DREAMCAST bool "Dreamcast" - select SYS_SUPPORTS_PCI + select HAVE_PCI depends on CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. @@ -139,7 +139,7 @@ config SH_SH03 bool "Interface CTP/PCI-SH03" depends on CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. @@ -149,7 +149,7 @@ config SH_SECUREEDGE5410 bool "SecureEdge5410" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the @@ -158,7 +158,7 @@ config SH_SECUREEDGE5410 config SH_RTS7751R2D bool "RTS7751R2D" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI select IO_TRAPPED if MMU help Select RTS7751R2D if configuring for a Renesas Technology @@ -176,7 +176,7 @@ config SH_RSK config SH_SDK7780 bool "SDK7780R3" depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 evaluation board. @@ -184,7 +184,7 @@ config SH_SDK7780 config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 - select SYS_SUPPORTS_PCI + select HAVE_PCI select NO_IOPORT_MAP if !PCI select HAVE_SRAM_POOL select REGULATOR_FIXED_VOLTAGE if REGULATOR @@ -195,7 +195,7 @@ config SH_SDK7786 config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI + select HAVE_PCI select IO_TRAPPED if MMU config SH_SH7757LCR @@ -207,7 +207,7 @@ config SH_SH7757LCR config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI + select HAVE_PCI config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" @@ -229,7 +229,7 @@ config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 select GPIOLIB - select SYS_SUPPORTS_PCI + select HAVE_PCI select NO_IOPORT_MAP if !PCI config SH_MIGOR @@ -302,7 +302,7 @@ config SH_SH4202_MICRODEV config SH_LANDISK bool "LANDISK" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI help I-O DATA DEVICE, INC. "LANDISK Series" support. @@ -310,7 +310,7 @@ config SH_TITAN bool "TITAN" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. @@ -325,7 +325,7 @@ config SH_SHMIN config SH_LBOX_RE2 bool "L-BOX RE2" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. @@ -346,7 +346,7 @@ config SH_MAGIC_PANEL_R2 config SH_CAYMAN bool "Hitachi Cayman" depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI + select HAVE_PCI select ARCH_MIGHT_HAVE_PC_SERIO config SH_POLARIS @@ -380,7 +380,7 @@ config SH_APSH4A3A config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD - select SYS_SUPPORTS_PCI + select HAVE_PCI select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index ff96e248e585..d5dd652fb8cc 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -21,6 +21,7 @@ config SPARC select HAVE_ARCH_KGDB if !SMP || SPARC64 select HAVE_ARCH_TRACEHOOK select HAVE_EXIT_THREAD + select HAVE_PCI select SYSCTL_EXCEPTION_TRACE select RTC_CLASS select RTC_DRV_M48T59 @@ -38,6 +39,7 @@ config SPARC select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select MODULES_USE_ELF_RELA + select PCI_SYSCALL if PCI select ODD_RT_SIGACTION select OLD_SIGSUSPEND select CPU_NO_EFFICIENT_FFS @@ -87,6 +89,7 @@ config SPARC64 select GENERIC_TIME_VSYSCALL select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_PTE_SPECIAL + select PCI_DOMAINS if PCI config ARCH_DEFCONFIG string @@ -470,24 +473,6 @@ config SUN_LDOMS Say Y here is you want to support virtual devices via Logical Domains. -config PCI - bool "Support for PCI and PS/2 keyboard/mouse" - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - - CONFIG_PCI is needed for all JavaStation's (including MrCoffee), - CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC. - All of these platforms are extremely obscure, so say N if unsure. - -config PCI_DOMAINS - def_bool PCI if SPARC64 - -config PCI_SYSCALL - def_bool PCI - config PCIC_PCI bool depends on PCI && SPARC32 && !SPARC_LEON @@ -516,10 +501,6 @@ config SPARC_GRPCI2 help Say Y here to include the GRPCI2 Host Bridge Driver. -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - config SUN_OPENPROMFS tristate "Openprom tree appears in /proc/openprom" help diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 6b9938919f0b..a238547671d6 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -31,12 +31,6 @@ config ISA config SBUS bool -config PCI - bool - -config PCMCIA - bool - config TRACE_IRQFLAGS_SUPPORT bool default y diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 2681027d7bff..c3a41bfe161b 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -10,6 +10,7 @@ config UNICORE32 select GENERIC_ATOMIC64 select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA + select HAVE_PCI select VIRT_TO_BUS select ARCH_HAVE_CUSTOM_GPIO_H select GENERIC_FIND_FIRST_BIT @@ -115,22 +116,6 @@ config UNICORE_FPU_F64 endmenu -menu "Bus support" - -config PCI - bool "PCI Support" - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -endmenu - menu "Kernel Features" source "kernel/Kconfig.hz" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4385fc9174e1..e260460210e1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -145,6 +145,7 @@ config X86 select HAVE_DYNAMIC_FTRACE_WITH_REGS select HAVE_EBPF_JIT select HAVE_EFFICIENT_UNALIGNED_ACCESS + select HAVE_EISA select HAVE_EXIT_THREAD select HAVE_FENTRY if X86_64 || DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD @@ -178,6 +179,7 @@ config X86 select HAVE_PERF_EVENTS select HAVE_PERF_EVENTS_NMI select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI + select HAVE_PCI select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP select HAVE_RCU_TABLE_FREE if PARAVIRT @@ -194,6 +196,7 @@ config X86 select HOTPLUG_SMT if SMP select IRQ_FORCED_THREADING select NEED_SG_DMA_LENGTH + select PCI_DOMAINS if PCI select PCI_LOCKLESS_CONFIG select PERF_EVENTS select RTC_LIB @@ -2574,15 +2577,6 @@ endmenu menu "Bus options (PCI etc.)" -config PCI - bool "PCI support" - default y - ---help--- - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - choice prompt "PCI access mode" depends on X86_32 && PCI @@ -2644,10 +2638,6 @@ config PCI_XEN depends on PCI && XEN select SWIOTLB_XEN -config PCI_DOMAINS - def_bool y - depends on PCI - config MMCONF_FAM10H def_bool y depends on X86_64 && PCI_MMCONFIG && ACPI @@ -2665,8 +2655,6 @@ config PCI_CNB20LE_QUIRK You should say N unless you know you need this. -source "drivers/pci/Kconfig" - config ISA_BUS bool "ISA bus support on modern systems" if EXPERT help @@ -2697,24 +2685,6 @@ config ISA (MCA) or VESA. ISA is an older system, now being displaced by PCI; newer boards don't support it. If you have ISA, say Y, otherwise N. -config EISA - bool "EISA support" - depends on ISA - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -source "drivers/eisa/Kconfig" - config SCx200 tristate "NatSemi SCx200 support" ---help--- @@ -2826,17 +2796,6 @@ config AMD_NB def_bool y depends on CPU_SUP_AMD && PCI -source "drivers/pcmcia/Kconfig" - -config RAPIDIO - tristate "RapidIO support" - depends on PCI - help - If enabled this option will include drivers and the core - infrastructure code to support RapidIO interconnect devices. - -source "drivers/rapidio/Kconfig" - config X86_SYSFB bool "Mark VGA/VBE/EFI FB as generic system framebuffer" help diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 6c3ab05c231d..4bb95d7ad947 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -69,6 +69,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_PCI=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y CONFIG_PCCARD=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index ac9ae487cfeb..0fed049422a8 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -67,6 +67,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_PCI=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCCARD=y diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 65f66c31b710..20a0756f27ef 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -27,6 +27,7 @@ config XTENSA select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_IRQ_TIME_ACCOUNTING select HAVE_OPROFILE + select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS @@ -381,21 +382,6 @@ config XTENSA_CALIBRATE_CCOUNT config SERIAL_CONSOLE def_bool n -menu "Bus options" - -config PCI - bool "PCI support" - default y - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -source "drivers/pci/Kconfig" - -endmenu - menu "Platform options" choice @@ -528,8 +514,6 @@ config FORCE_MAX_ZONEORDER This config option is actually maximum order plus one. For example, a value of 11 means that the largest free memory block is 2^10 pages. -source "drivers/pcmcia/Kconfig" - config PLATFORM_WANT_DEFAULT_MEM def_bool n diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig index 4bcc76b02109..fa9389869154 100644 --- a/arch/xtensa/configs/common_defconfig +++ b/arch/xtensa/configs/common_defconfig @@ -1,3 +1,4 @@ +CONFIG_PCI=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 |