diff options
Diffstat (limited to 'arch')
33 files changed, 1449 insertions, 68 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e7b9d55905d..fb1ee1c07021 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -388,6 +388,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-overo-storm-tobi.dtb \ omap3-overo-summit.dtb \ omap3-overo-tobi.dtb \ + omap3-pandora-600mhz.dtb \ + omap3-pandora-1ghz.dtb \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ @@ -403,7 +405,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-evmsk.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ - am335x-lxm.dtb + am335x-lxm.dtb \ + am335x-chiliboard.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ omap4-panda.dtb \ diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts new file mode 100644 index 000000000000..310da20a8aa7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Author: Rostislav Lisovy <lisovy@jablotron.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "am335x-chilisom.dtsi" + +/ { + model = "AM335x Chiliboard"; + compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", + "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_gpio_pins>; + + led0 { + label = "led0"; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "led1"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +&am33xx_pinmux { + usb1_drvvbus: usb1_drvvbus { + pinctrl-single,pins = < + 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ + >; + }; + + sd_pins: pinmux_sd_card { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + led_gpio_pins: led_gpio_pins { + pinctrl-single,pins = < + 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ + 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ + >; + }; +}; + +&ldo4_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +/* Ethernet */ +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +/* USB */ +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_drvvbus>; + + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* microSD */ +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + vmmc-supply = <&ldo4_reg>; + bus-width = <0x4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi new file mode 100644 index 000000000000..7e9a34dffe21 --- /dev/null +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -0,0 +1,239 @@ +/* + * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Author: Rostislav Lisovy <lisovy@jablotron.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "am33xx.dtsi" + +/ { + model = "Grinn AM335x ChiliSOM"; + compatible = "grinn,am335x-chilisom", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins: nandflash_pins { + pinctrl-single,pins = < + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3d"; + regulator-boot-on; + regulator-always-on; + }; + }; +}; + +/* Ethernet MAC */ +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +/* NAND Flash */ +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */ + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index a3466455b171..5ed4ca6eaf55 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -213,7 +213,9 @@ pinctrl-0 = <&i2c0_pins>; gpio@20 { - compatible = "mcp,mcp23017"; + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <2>; reg = <0x20>; }; @@ -222,7 +224,7 @@ }; eeprom@53 { - compatible = "mcp,24c02"; + compatible = "microchip,24c02"; reg = <0x53>; pagesize = <8>; }; @@ -297,8 +299,8 @@ | |-->0x004FFFFF-> Kernel end | |-->0x00500000-> File system start | | - | |-->0x014FFFFF-> File system end - | |-->0x01500000-> User data start + | |-->0x01FFFFFF-> File system end + | |-->0x02000000-> User data start | | | |-->0x03FFFFFF-> User data end | |-->0x04000000-> Data storage start @@ -327,12 +329,12 @@ partition@4 { label = "rootfs"; - reg = <0x00500000 0x01000000>; /* 16MB */ + reg = <0x00500000 0x01b00000>; /* 27MB */ }; partition@5 { label = "user"; - reg = <0x01500000 0x02b00000>; /* 43MB */ + reg = <0x02000000 0x02000000>; /* 32MB */ }; partition@6 { @@ -343,7 +345,7 @@ }; &mac { - dual_emac = <1>; + dual_emac; status = "okay"; }; @@ -353,11 +355,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 2f6f0c2040db..48c9bea8df10 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -897,7 +897,7 @@ }; hdq: hdq@48347000 { - compatible = "ti,am43xx-hdq"; + compatible = "ti,am4372-hdq"; reg = <0x48347000 0x1000>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&func_12m_clk>; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 0198f5a62b96..378344271746 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,6 +133,20 @@ >; }; + i2c2_pins_default: i2c2_pins_default { + pinctrl-single,pins = < + 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */ + 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */ + >; + }; + + i2c2_pins_sleep: i2c2_pins_sleep { + pinctrl-single,pins = < + 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ @@ -263,6 +277,14 @@ }; }; +&i2c2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_default>; + pinctrl-1 = <&i2c2_pins_sleep>; + clock-frequency = <100000>; +}; + &epwmss0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 31497a45afb0..6a3621c23017 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -8,7 +8,6 @@ /dts-v1/; #include "dra74x.dtsi" -#include <dt-bindings/clk/ti-dra7-atl.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -551,6 +550,14 @@ pinctrl-0 = <&usb1_pins>; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index d3a29c1b8417..dee39c3f830f 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -29,22 +29,22 @@ &dm816x_pinmux { mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */ - DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */ - DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */ - DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ + DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */ + DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */ + DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */ + DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */ >; }; usb0_pins: pinmux_usb0_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */ >; }; - usb1_pins: pinmux_usb0_pins { + usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < - DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ >; }; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 3c97b5f2addc..90c820715521 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -386,6 +386,29 @@ mentor,num-eps = <16>; mentor,ram-bits = <12>; mentor,power = <500>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; }; usb1: usb@47401800 { @@ -403,6 +426,43 @@ mentor,num-eps = <16>; mentor,ram-bits = <12>; mentor,power = <500>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@47402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + #dma-channels = <30>; + #dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 3290a96ba586..746cddb1b8f5 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -543,6 +543,14 @@ }; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ce3eb311da1e..a3c32e8ee90f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -700,7 +700,6 @@ reg = <0x48820000 0x80>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer5"; - ti,timer-dsp; }; timer6: timer@48822000 { @@ -708,8 +707,6 @@ reg = <0x48822000 0x80>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer6"; - ti,timer-dsp; - ti,timer-pwm; }; timer7: timer@48824000 { @@ -717,7 +714,6 @@ reg = <0x48824000 0x80>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer7"; - ti,timer-dsp; }; timer8: timer@48826000 { @@ -725,8 +721,6 @@ reg = <0x48826000 0x80>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer8"; - ti,timer-dsp; - ti,timer-pwm; }; timer9: timer@4803e000 { @@ -748,7 +742,6 @@ reg = <0x48088000 0x80>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer11"; - ti,timer-pwm; }; timer13: timer@48828000 { diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index e0264d0bf7b9..4d8711713610 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -380,6 +380,14 @@ phy-supply = <&ldo4_reg>; }; +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 4bdcbd61ce47..2a9994f73974 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1421,6 +1421,14 @@ ti,dividers = <1>, <8>; }; + clkout2_clk: clkout2_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkoutmux2_clk_mux>; + ti,bit-shift = <8>; + reg = <0x06b0>; + }; + l3init_960m_gfclk: l3init_960m_gfclk { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 25f7b0a22114..da1464bfbc60 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -60,7 +60,6 @@ ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; gpio_keys { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index c792391ef090..28f99a14c0a1 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -71,7 +71,6 @@ ti,model = "omap3beagle"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; gpio_keys { @@ -379,3 +378,55 @@ }; }; }; + +&gpmc { + status = "ok"; + ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ + + /* Chip select 0 */ + nand@0,0 { + reg = <0 0 4>; /* NAND I/O window, 4 bytes */ + interrupts = <20>; + ti,nand-ecc-opt = "ham1"; + nand-bus-width = <16>; + #address-cells = <1>; + #size-cells = <1>; + + gpmc,device-width = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + partition@1c0000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + partition@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + partition@780000 { + label = "Filesystem"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index d9e92b654f85..046cd7733c4f 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -16,7 +16,6 @@ ti,model = "cm-t35"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 169037e5ff53..134d3f27a8ec 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -48,7 +48,6 @@ ti,model = "devkit8000"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; ti,audio-routing = "Ext Spk", "PREDRIVEL", "Ext Spk", "PREDRIVER", diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index fb3a69604ed5..b9f68817bd6e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -46,7 +46,6 @@ ti,model = "gta04"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; spi_lcd { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 8a63ad2286aa..d5e5cd449b16 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -22,7 +22,6 @@ compatible = "ti,omap-twl4030"; ti,model = "igep2"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; vdd33: regulator-vdd33 { diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index e81fb651d5d0..e63133304a34 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -38,7 +38,6 @@ ti,model = "lilly-a83x"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; reg_vcc3: vcc3 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 9938b5dc1909..f2e213931e09 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -16,3 +16,40 @@ model = "Nokia N9"; compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; + +&i2c2 { + smia_1: camera@10 { + compatible = "nokia,smia"; + reg = <0x10>; + /* No reset gpio */ + vana-supply = <&vaux3>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + nokia,nvm-size = <(16 * 64)>; + port { + smia_1_1: endpoint { + link-frequencies = /bits/ 64 <199200000 210000000 499200000>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + }; + }; + }; +}; + +&isp { + vdd-csiphy1-supply = <&vaux2>; + vdd-csiphy2-supply = <&vaux2>; + ports { + port@2 { + reg = <2>; + csi2a_ep: endpoint { + remote-endpoint = <&smia_1_1>; + clock-lanes = <2>; + data-lanes = <1 3>; + crc = <1>; + lane-polarities = <1 1 1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index db80f9d376fa..bbea3076e1d4 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,9 +9,23 @@ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" #include <dt-bindings/input/input.h> +/* + * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall + * for omap AES HW crypto support. When linux kernel try to access memory of AES + * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" + * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no + * crash anymore) omap AES support will be disabled for all Nokia N900 devices. + * There is "unofficial" version of bootloader which enables AES in L3 firewall + * but it is not widely used and to prevent kernel crash rather AES is disabled. + * There is also no runtime detection code if AES is disabled in L3 firewall... + */ +&aes { + status = "disabled"; +}; + / { model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index c41db94ee9c2..800b379d368d 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx-hs.dtsi" +#include "omap36xx.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 261c5589bfa3..0885b34d5d7d 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -16,3 +16,40 @@ model = "Nokia N950"; compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; + +&i2c2 { + smia_1: camera@10 { + compatible = "nokia,smia"; + reg = <0x10>; + /* No reset gpio */ + vana-supply = <&vaux3>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + nokia,nvm-size = <(16 * 64)>; + port { + smia_1_1: endpoint { + link-frequencies = /bits/ 64 <210000000 333600000 398400000>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + }; + }; + }; +}; + +&isp { + vdd-csiphy1-supply = <&vaux2>; + vdd-csiphy2-supply = <&vaux2>; + ports { + port@2 { + reg = <2>; + csi2a_ep: endpoint { + remote-endpoint = <&smia_1_1>; + clock-lanes = <2>; + data-lanes = <3 1>; + crc = <1>; + lane-polarities = <1 1 1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index d36bf0250a05..18e1649681c1 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -27,7 +27,6 @@ ti,model = "overo"; ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; /* HS USB Port 2 Power */ diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts new file mode 100644 index 000000000000..9619a28dfd7d --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * device tree for OpenPandora 1GHz with DM3730 + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-pandora-common.dtsi" + +/ { + model = "Pandora Handheld Console 1GHz"; + + compatible = "ti,omap36xx", "ti,omap3"; +}; + +&omap3_pmx_core2 { + + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + &control_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; + + control_pins: pinmux_control_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ + OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ + OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */ + OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */ + OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4) /* reserved.gpio_127 = MMC2_WP */ + OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 = MMC1_WP */ + OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_128 = LED_MMC1 */ + OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_129 = LED_MMC2 */ + + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts new file mode 100644 index 000000000000..fb803a70a2bb --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * device tree for OpenPandora with OMAP3530 + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-pandora-common.dtsi" + +/ { + model = "Pandora Handheld Console"; + + compatible = "ti,omap3"; +}; + +&omap3_pmx_core2 { + + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + &control_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; + + control_pins: pinmux_control_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi new file mode 100644 index 000000000000..782ab1ff1d08 --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -0,0 +1,640 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller <hns@goldelico.com> + * + * Common device tree include for OpenPandora devices. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + aliases { + display0 = &lcd; + }; + + tv: connector@1 { + compatible = "connector-analog-tv"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + + gpio-leds { + + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led@1 { + label = "pandora::sd1"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "pandora::sd2"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@3 { + label = "pandora::bluetooth"; + gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@4 { + label = "pandora::wifi"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + + up-button { + label = "up"; + linux,code = <KEY_UP>; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ + gpio-key,wakeup; + }; + + down-button { + label = "down"; + linux,code = <KEY_DOWN>; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ + gpio-key,wakeup; + }; + + left-button { + label = "left"; + linux,code = <KEY_LEFT>; + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ + gpio-key,wakeup; + }; + + right-button { + label = "right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ + gpio-key,wakeup; + }; + + pageup-button { + label = "game 1"; + linux,code = <KEY_PAGEUP>; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ + gpio-key,wakeup; + }; + + pagedown-button { + label = "game 3"; + linux,code = <KEY_PAGEDOWN>; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ + gpio-key,wakeup; + }; + + home-button { + label = "game 4"; + linux,code = <KEY_HOME>; + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ + gpio-key,wakeup; + }; + + end-button { + label = "game 2"; + linux,code = <KEY_END>; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ + gpio-key,wakeup; + }; + + right-shift { + label = "l"; + linux,code = <KEY_RIGHTSHIFT>; + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ + gpio-key,wakeup; + }; + + kp-plus { + label = "l2"; + linux,code = <KEY_KPPLUS>; + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ + gpio-key,wakeup; + }; + + right-ctrl { + label = "r"; + linux,code = <KEY_RIGHTCTRL>; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ + gpio-key,wakeup; + }; + + kp-minus { + label = "r2"; + linux,code = <KEY_KPMINUS>; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ + gpio-key,wakeup; + }; + + left-ctrl { + label = "ctrl"; + linux,code = <KEY_LEFTCTRL>; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ + gpio-key,wakeup; + }; + + menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ + gpio-key,wakeup; + }; + + hold { + label = "hold"; + linux,code = <KEY_COFFEE>; + gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ + gpio-key,wakeup; + }; + + left-alt { + label = "alt"; + linux,code = <KEY_LEFTALT>; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ + gpio-key,wakeup; + }; + + lid { + label = "lid"; + linux,code = <0x00>; /* SW_LID lid shut */ + linux,input-type = <0x05>; /* EV_SW */ + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ + }; + }; +}; + +&omap3_pmx_core { + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + led_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */ + OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */ + >; + }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ + >; + }; + +}; + +&omap3_pmx_core2 { + /* define in CPU specific file that includes this one + * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD() + */ +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + codec { + ti,ramp_delay_value = <3>; + }; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + keypad,num-rows = <8>; + keypad,num-columns = <6>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(0, 1, KEY_8) + MATRIX_KEY(0, 2, KEY_I) + MATRIX_KEY(0, 3, KEY_J) + MATRIX_KEY(0, 4, KEY_N) + MATRIX_KEY(0, 5, KEY_M) + MATRIX_KEY(1, 0, KEY_0) + MATRIX_KEY(1, 1, KEY_7) + MATRIX_KEY(1, 2, KEY_U) + MATRIX_KEY(1, 3, KEY_H) + MATRIX_KEY(1, 4, KEY_B) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(2, 0, KEY_BACKSPACE) + MATRIX_KEY(2, 1, KEY_6) + MATRIX_KEY(2, 2, KEY_Y) + MATRIX_KEY(2, 3, KEY_G) + MATRIX_KEY(2, 4, KEY_V) + MATRIX_KEY(2, 5, KEY_FN) + MATRIX_KEY(3, 0, KEY_O) + MATRIX_KEY(3, 1, KEY_5) + MATRIX_KEY(3, 2, KEY_T) + MATRIX_KEY(3, 3, KEY_F) + MATRIX_KEY(3, 4, KEY_C) + MATRIX_KEY(4, 0, KEY_P) + MATRIX_KEY(4, 1, KEY_4) + MATRIX_KEY(4, 2, KEY_R) + MATRIX_KEY(4, 3, KEY_D) + MATRIX_KEY(4, 4, KEY_X) + MATRIX_KEY(5, 0, KEY_K) + MATRIX_KEY(5, 1, KEY_3) + MATRIX_KEY(5, 2, KEY_E) + MATRIX_KEY(5, 3, KEY_S) + MATRIX_KEY(5, 4, KEY_Z) + MATRIX_KEY(6, 0, KEY_L) + MATRIX_KEY(6, 1, KEY_2) + MATRIX_KEY(6, 2, KEY_W) + MATRIX_KEY(6, 3, KEY_A) + MATRIX_KEY(6, 4, KEY_RIGHTBRACE) + MATRIX_KEY(7, 0, KEY_ENTER) + MATRIX_KEY(7, 1, KEY_1) + MATRIX_KEY(7, 2, KEY_Q) + MATRIX_KEY(7, 3, KEY_LEFTSHIFT) + MATRIX_KEY(7, 4, KEY_LEFTBRACE ) + >; +}; + +/* backup battery charger */ +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +/* MMC2 */ +&vmmc2 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; +}; + +/* LCD */ +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +/* USB Host PHY */ +&vaux2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* available on expansion connector */ +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* ADS7846 and nubs */ +&vaux4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* power audio DAC and LID sensor */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&i2c2 { + clock-frequency = <100000>; + /* no clients so we should disable clock */ +}; + +&i2c3 { + clock-frequency = <100000>; + + bq27500@55 { + compatible = "ti,bq27500"; + reg = <0x55>; + }; + +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */ +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc2>; + bus-width = <4>; + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */ +}; + +/* bluetooth*/ +&uart1 { +}; + +/* spare (expansion connector) */ +&uart2 { +}; + +/* console (expansion connector) */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "sw"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */ + + x-loader@0 { + label = "xloader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "uboot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "uboot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "boot"; + reg = <0x280000 0xa00000>; + }; + + filesystem@680000 { + label = "rootfs"; + reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; + interrupt-parent = <&gpio3>; + interrupts = <30 0>; /* GPIO_94 */ + pendown-gpio = <&gpio3 30 0>; + vcc-supply = <&vaux4>; + + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; + + lcd: lcd@1 { + reg = <1>; /* CS1 */ + compatible = "omapdss,tpo,td043mtea1"; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */ + vcc-supply = <&vaux1>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + +}; + +/* n/a - used as GPIOs */ +&mcbsp1 { +}; + +/* audio DAC */ +&mcbsp2 { +}; + +/* bluetooth */ +&mcbsp3 { +}; + +/* to twl4030*/ +&mcbsp4 { +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "ok"; + vdds_dsi-supply = <&vpll2>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index e89820a6776e..7bd8d9a4f67f 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -8,7 +8,16 @@ */ /dts-v1/; -#include "omap34xx-hs.dtsi" +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; / { cpus { @@ -45,7 +54,6 @@ /* McBSP2 is used for onboard sound, same as on beagle */ ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; }; /* Regulator to enable/switch the vcc of the Wifi module */ diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi deleted file mode 100644 index 1ff626489546..000000000000 --- a/arch/arm/boot/dts/omap34xx-hs.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -/* Disabled modules for secure omaps */ - -#include "omap34xx.dtsi" - -/* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { - status = "disabled"; -}; - -&sham { - status = "disabled"; -}; - -&timer12 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 3819c1e91591..4f6b2d5b1902 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -8,6 +8,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/media/omap3-isp.h> + #include "omap3.dtsi" / { @@ -37,6 +39,21 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x017c>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0xdc>; + ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi deleted file mode 100644 index 2c7febb0e016..000000000000 --- a/arch/arm/boot/dts/omap36xx-hs.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -/* Disabled modules for secure omaps */ - -#include "omap36xx.dtsi" - -/* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { - status = "disabled"; -}; - -&sham { - status = "disabled"; -}; - -&timer12 { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 541704a59a5a..86253de5a97a 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -8,6 +8,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/media/omap3-isp.h> + #include "omap3.dtsi" / { @@ -69,6 +71,21 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x0600>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0x2f0>; + ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; }; |