diff options
Diffstat (limited to 'arch')
142 files changed, 4968 insertions, 1455 deletions
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 605dedf96790..b3599743093b 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -60,16 +60,16 @@ static int sharpsl_ac_check(void); static int sharpsl_fatal_check(void); static int sharpsl_average_value(int ad); static void sharpsl_average_clear(void); -static void sharpsl_charge_toggle(void *private_); -static void sharpsl_battery_thread(void *private_); +static void sharpsl_charge_toggle(struct work_struct *private_); +static void sharpsl_battery_thread(struct work_struct *private_); /* * Variables */ struct sharpsl_pm_status sharpsl_pm; -DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); -DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); +DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle); +DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread); DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); @@ -116,7 +116,7 @@ void sharpsl_battery_kick(void) EXPORT_SYMBOL(sharpsl_battery_kick); -static void sharpsl_battery_thread(void *private_) +static void sharpsl_battery_thread(struct work_struct *private_) { int voltage, percent, apm_status, i = 0; @@ -128,7 +128,7 @@ static void sharpsl_battery_thread(void *private_) /* Corgi cannot confirm when battery fully charged so periodically kick! */ if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON) && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) - schedule_work(&toggle_charger); + schedule_delayed_work(&toggle_charger, 0); while(1) { voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); @@ -212,7 +212,7 @@ static void sharpsl_charge_off(void) sharpsl_pm_led(SHARPSL_LED_OFF); sharpsl_pm.charge_mode = CHRG_OFF; - schedule_work(&sharpsl_bat); + schedule_delayed_work(&sharpsl_bat, 0); } static void sharpsl_charge_error(void) @@ -222,7 +222,7 @@ static void sharpsl_charge_error(void) sharpsl_pm.charge_mode = CHRG_ERROR; } -static void sharpsl_charge_toggle(void *private_) +static void sharpsl_charge_toggle(struct work_struct *private_) { dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); @@ -254,7 +254,7 @@ static void sharpsl_ac_timer(unsigned long data) else if (sharpsl_pm.charge_mode == CHRG_ON) sharpsl_charge_off(); - schedule_work(&sharpsl_bat); + schedule_delayed_work(&sharpsl_bat, 0); } @@ -279,10 +279,10 @@ static void sharpsl_chrg_full_timer(unsigned long data) sharpsl_charge_off(); } else if (sharpsl_pm.full_count < 2) { dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); - schedule_work(&toggle_charger); + schedule_delayed_work(&toggle_charger, 0); } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); - schedule_work(&toggle_charger); + schedule_delayed_work(&toggle_charger, 0); } else { sharpsl_charge_off(); sharpsl_pm.charge_mode = CHRG_DONE; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f225a083dee1..9d2346fb68f4 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -323,7 +323,8 @@ static int h3_transceiver_mode(struct device *dev, int mode) cancel_delayed_work(&irda_config->gpio_expa); PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode); - schedule_work(&irda_config->gpio_expa); +#error this is not permitted - mode is an argument variable + schedule_delayed_work(&irda_config->gpio_expa, 0); return 0; } diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index dbc555d209ff..cbe909bad79b 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -74,7 +74,7 @@ static struct omap_kp_platform_data nokia770_kp_data = { .rows = 8, .cols = 8, .keymap = nokia770_keymap, - .keymapsize = ARRAY_SIZE(nokia770_keymap) + .keymapsize = ARRAY_SIZE(nokia770_keymap), .delay = 4, }; @@ -191,7 +191,7 @@ static void nokia770_audio_pwr_up(void) printk("HP connected\n"); } -static void codec_delayed_power_down(void *arg) +static void codec_delayed_power_down(struct work_struct *work) { down(&audio_pwr_sem); if (audio_pwr_state == -1) @@ -200,7 +200,7 @@ static void codec_delayed_power_down(void *arg) up(&audio_pwr_sem); } -static DECLARE_WORK(codec_power_down_work, codec_delayed_power_down, NULL); +static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down); static void nokia770_audio_pwr_down(void) { diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 3b29e59b0e6f..0cbf1b0071f8 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -35,7 +35,7 @@ static u8 hw_led_state; static u8 tps_leds_change; -static void tps_work(void *unused) +static void tps_work(struct work_struct *unused) { for (;;) { u8 leds; @@ -61,7 +61,7 @@ static void tps_work(void *unused) } } -static DECLARE_WORK(work, tps_work, NULL); +static DECLARE_WORK(work, tps_work); #ifdef CONFIG_OMAP_OSK_MISTRAL diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 26a95a642ad7..3b1ad1d981a3 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -206,7 +206,8 @@ static int h4_transceiver_mode(struct device *dev, int mode) cancel_delayed_work(&irda_config->gpio_expa); PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode); - schedule_work(&irda_config->gpio_expa); +#error this is not permitted - mode is an argument variable + schedule_delayed_work(&irda_config->gpio_expa, 0); return 0; } diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c index 1b398742ab56..12d2fe0ceff6 100644 --- a/arch/arm/mach-pxa/akita-ioexp.c +++ b/arch/arm/mach-pxa/akita-ioexp.c @@ -36,11 +36,11 @@ I2C_CLIENT_INSMOD; static int max7310_write(struct i2c_client *client, int address, int data); static struct i2c_client max7310_template; -static void akita_ioexp_work(void *private_); +static void akita_ioexp_work(struct work_struct *private_); static struct device *akita_ioexp_device; static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT; -DECLARE_WORK(akita_ioexp, akita_ioexp_work, NULL); +DECLARE_WORK(akita_ioexp, akita_ioexp_work); /* @@ -158,7 +158,7 @@ void akita_reset_ioexp(struct device *dev, unsigned char bit) EXPORT_SYMBOL(akita_set_ioexp); EXPORT_SYMBOL(akita_reset_ioexp); -static void akita_ioexp_work(void *private_) +static void akita_ioexp_work(struct work_struct *private_) { if (akita_ioexp_device) max7310_set_ouputs(akita_ioexp_device, ioexp_output_value); diff --git a/arch/i386/kernel/cpu/mcheck/non-fatal.c b/arch/i386/kernel/cpu/mcheck/non-fatal.c index 1f9153ae5b03..6b5d3518a1c0 100644 --- a/arch/i386/kernel/cpu/mcheck/non-fatal.c +++ b/arch/i386/kernel/cpu/mcheck/non-fatal.c @@ -51,10 +51,10 @@ static void mce_checkregs (void *info) } } -static void mce_work_fn(void *data); -static DECLARE_WORK(mce_work, mce_work_fn, NULL); +static void mce_work_fn(struct work_struct *work); +static DECLARE_DELAYED_WORK(mce_work, mce_work_fn); -static void mce_work_fn(void *data) +static void mce_work_fn(struct work_struct *work) { on_each_cpu(mce_checkregs, NULL, 1, 1); schedule_delayed_work(&mce_work, MCE_RATE); diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 4bb8b77cd65b..02a9b66b6ac3 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1049,13 +1049,15 @@ void cpu_exit_clear(void) struct warm_boot_cpu_info { struct completion *complete; + struct work_struct task; int apicid; int cpu; }; -static void __cpuinit do_warm_boot_cpu(void *p) +static void __cpuinit do_warm_boot_cpu(struct work_struct *work) { - struct warm_boot_cpu_info *info = p; + struct warm_boot_cpu_info *info = + container_of(work, struct warm_boot_cpu_info, task); do_boot_cpu(info->apicid, info->cpu); complete(info->complete); } @@ -1064,7 +1066,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) { DECLARE_COMPLETION_ONSTACK(done); struct warm_boot_cpu_info info; - struct work_struct task; int apicid, ret; struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu); @@ -1089,7 +1090,7 @@ static int __cpuinit __smp_prepare_cpu(int cpu) info.complete = &done; info.apicid = apicid; info.cpu = cpu; - INIT_WORK(&task, do_warm_boot_cpu, &info); + INIT_WORK(&info.task, do_warm_boot_cpu); tsc_sync_disabled = 1; @@ -1097,7 +1098,7 @@ static int __cpuinit __smp_prepare_cpu(int cpu) clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, KERNEL_PGD_PTRS); flush_tlb_all(); - schedule_work(&task); + schedule_work(&info.task); wait_for_completion(&done); tsc_sync_disabled = 0; diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index fbc95828cd74..9810c8c90750 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -217,7 +217,7 @@ static unsigned int cpufreq_delayed_issched = 0; static unsigned int cpufreq_init = 0; static struct work_struct cpufreq_delayed_get_work; -static void handle_cpufreq_delayed_get(void *v) +static void handle_cpufreq_delayed_get(struct work_struct *work) { unsigned int cpu; @@ -306,7 +306,7 @@ static int __init cpufreq_tsc(void) { int ret; - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); if (!ret) diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index caab986af70c..b62f0c4d2c7c 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -209,7 +209,7 @@ static void do_serial_bh(void) } #endif -static void do_softint(void *private_) +static void do_softint(struct work_struct *private_) { printk(KERN_ERR "simserial: do_softint called\n"); } @@ -698,7 +698,7 @@ static int get_async_struct(int line, struct async_struct **ret_info) info->flags = sstate->flags; info->xmit_fifo_size = sstate->xmit_fifo_size; info->line = line; - INIT_WORK(&info->work, do_softint, info); + INIT_WORK(&info->work, do_softint); info->state = sstate; if (sstate->info) { kfree(info); diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 7cfa63a98cb3..6bedd97570ca 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -678,7 +678,7 @@ ia64_mca_cmc_vector_enable (void *dummy) * disable the cmc interrupt vector. */ static void -ia64_mca_cmc_vector_disable_keventd(void *unused) +ia64_mca_cmc_vector_disable_keventd(struct work_struct *unused) { on_each_cpu(ia64_mca_cmc_vector_disable, NULL, 1, 0); } @@ -690,7 +690,7 @@ ia64_mca_cmc_vector_disable_keventd(void *unused) * enable the cmc interrupt vector. */ static void -ia64_mca_cmc_vector_enable_keventd(void *unused) +ia64_mca_cmc_vector_enable_keventd(struct work_struct *unused) { on_each_cpu(ia64_mca_cmc_vector_enable, NULL, 1, 0); } @@ -1247,8 +1247,8 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, monarch_cpu = -1; } -static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd, NULL); -static DECLARE_WORK(cmc_enable_work, ia64_mca_cmc_vector_enable_keventd, NULL); +static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd); +static DECLARE_WORK(cmc_enable_work, ia64_mca_cmc_vector_enable_keventd); /* * ia64_mca_cmc_int_handler diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index f7d7f5668144..b21ddecea943 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -463,15 +463,17 @@ struct pt_regs * __devinit idle_regs(struct pt_regs *regs) } struct create_idle { + struct work_struct work; struct task_struct *idle; struct completion done; int cpu; }; void -do_fork_idle(void *_c_idle) +do_fork_idle(struct work_struct *work) { - struct create_idle *c_idle = _c_idle; + struct create_idle *c_idle = + container_of(work, struct create_idle, work); c_idle->idle = fork_idle(c_idle->cpu); complete(&c_idle->done); @@ -482,10 +484,10 @@ do_boot_cpu (int sapicid, int cpu) { int timeout; struct create_idle c_idle = { + .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle), .cpu = cpu, .done = COMPLETION_INITIALIZER(c_idle.done), }; - DECLARE_WORK(work, do_fork_idle, &c_idle); c_idle.idle = get_idle_for_cpu(cpu); if (c_idle.idle) { @@ -497,9 +499,9 @@ do_boot_cpu (int sapicid, int cpu) * We can't use kernel_thread since we must avoid to reschedule the child. */ if (!keventd_up() || current_is_keventd()) - work.func(work.data); + c_idle.work.func(&c_idle.work); else { - schedule_work(&work); + schedule_work(&c_idle.work); wait_for_completion(&c_idle.done); } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index f4edfbf27134..eb92cef9cd0d 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -564,8 +564,8 @@ pcibios_enable_device (struct pci_dev *dev, int mask) void pcibios_disable_device (struct pci_dev *dev) { - if (dev->is_enabled) - acpi_pci_irq_disable(dev); + BUG_ON(atomic_read(&dev->enable_cnt)); + acpi_pci_irq_disable(dev); } void diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c index 24781f009337..e5668af19789 100644 --- a/arch/m68knommu/platform/5307/timers.c +++ b/arch/m68knommu/platform/5307/timers.c @@ -3,7 +3,7 @@ /* * timers.c -- generic ColdFire hardware timer support. * - * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1999-2006, Greg Ungerer (gerg@snapgear.com) */ /***************************************************************************/ @@ -44,6 +44,14 @@ unsigned int mcf_timerlevel = 5; extern void mcf_settimericr(int timer, int level); extern int mcf_timerirqpending(int timer); +#if defined(CONFIG_M532x) +#define __raw_readtrr __raw_readl +#define __raw_writetrr __raw_writel +#else +#define __raw_readtrr __raw_readw +#define __raw_writetrr __raw_writew +#endif + /***************************************************************************/ void coldfire_tick(void) @@ -57,7 +65,7 @@ void coldfire_tick(void) void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) { __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); - __raw_writew(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR)); + __raw_writetrr(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR)); @@ -76,7 +84,7 @@ unsigned long coldfire_timer_offset(void) unsigned long trr, tcn, offset; tcn = __raw_readw(TA(MCFTIMER_TCN)); - trr = __raw_readw(TA(MCFTIMER_TRR)); + trr = __raw_readtrr(TA(MCFTIMER_TRR)); offset = (tcn * (1000000 / HZ)) / trr; /* Check if we just wrapped the counters and maybe missed a tick */ @@ -120,7 +128,7 @@ void coldfire_profile_init(void) /* Set up TIMER 2 as high speed profile clock */ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR)); - __raw_writew(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR)); + __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR)); diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c index c5482e3622eb..1b36f6261764 100644 --- a/arch/m68knommu/platform/68360/config.c +++ b/arch/m68knommu/platform/68360/config.c @@ -114,7 +114,7 @@ void BSP_gettod (int *yearp, int *monp, int *dayp, { } -int BSP_hwclk(int op, struct hwclk_time *t) +int BSP_hwclk(int op, struct rtc_time *t) { if (!op) { /* read */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4d64960be035..d8af858fe3f5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -242,6 +242,7 @@ config LASAT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ config MIPS_ATLAS bool "MIPS Atlas board" @@ -265,6 +266,7 @@ config MIPS_ATLAS select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL + select GENERIC_HARDIRQS_NO__DO_IRQ help This enables support for the MIPS Technologies Atlas evaluation board. @@ -419,6 +421,7 @@ config MOMENCO_OCELOT_C select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -569,6 +572,7 @@ config SGI_IP27 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP + select GENERIC_HARDIRQS_NO__DO_IRQ help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y @@ -835,6 +839,10 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER bool default y +config GENERIC_HARDIRQS_NO__DO_IRQ + bool + default n + # # Select some configuration options automatically based on user selections. # @@ -996,6 +1004,7 @@ config SOC_PNX8550 select HW_HAS_PCI select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL + select GENERIC_HARDIRQS_NO__DO_IRQ config SWAP_IO_SPACE bool diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c index c8430c07355e..6d55e8aab668 100644 --- a/arch/mips/dec/ecc-berr.c +++ b/arch/mips/dec/ecc-berr.c @@ -25,6 +25,7 @@ #include <asm/cpu.h> #include <asm/irq_regs.h> #include <asm/processor.h> +#include <asm/ptrace.h> #include <asm/system.h> #include <asm/traps.h> diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c index 269b22b34313..4c7cb4048d35 100644 --- a/arch/mips/dec/ioasic-irq.c +++ b/arch/mips/dec/ioasic-irq.c @@ -67,7 +67,6 @@ static struct irq_chip ioasic_irq_type = { .mask = mask_ioasic_irq, .mask_ack = ack_ioasic_irq, .unmask = unmask_ioasic_irq, - .end = end_ioasic_irq, }; @@ -106,8 +105,7 @@ void __init init_ioasic_irqs(int base) set_irq_chip_and_handler(i, &ioasic_irq_type, handle_level_irq); for (; i < base + IO_IRQ_LINES; i++) - set_irq_chip_and_handler(i, &ioasic_dma_irq_type, - handle_level_irq); + set_irq_chip(i, &ioasic_dma_irq_type); ioasic_irq_base = base; } diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c index f19b4617a0a6..d3b8002bf1e7 100644 --- a/arch/mips/dec/kn01-berr.c +++ b/arch/mips/dec/kn01-berr.c @@ -20,8 +20,10 @@ #include <linux/types.h> #include <asm/inst.h> +#include <asm/irq_regs.h> #include <asm/mipsregs.h> #include <asm/page.h> +#include <asm/ptrace.h> #include <asm/system.h> #include <asm/traps.h> #include <asm/uaccess.h> diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c index 5a9be4c93584..916e46b8ccd8 100644 --- a/arch/mips/dec/kn02-irq.c +++ b/arch/mips/dec/kn02-irq.c @@ -57,19 +57,12 @@ static void ack_kn02_irq(unsigned int irq) iob(); } -static void end_kn02_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - unmask_kn02_irq(irq); -} - static struct irq_chip kn02_irq_type = { .typename = "KN02-CSR", .ack = ack_kn02_irq, .mask = mask_kn02_irq, .mask_ack = ack_kn02_irq, .unmask = unmask_kn02_irq, - .end = end_kn02_irq, }; diff --git a/arch/mips/emma2rh/common/irq_emma2rh.c b/arch/mips/emma2rh/common/irq_emma2rh.c index 59b98299c896..8d880f0b06ec 100644 --- a/arch/mips/emma2rh/common/irq_emma2rh.c +++ b/arch/mips/emma2rh/common/irq_emma2rh.c @@ -56,19 +56,12 @@ static void emma2rh_irq_disable(unsigned int irq) ll_emma2rh_irq_disable(irq - emma2rh_irq_base); } -static void emma2rh_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ll_emma2rh_irq_enable(irq - emma2rh_irq_base); -} - struct irq_chip emma2rh_irq_controller = { .typename = "emma2rh_irq", .ack = emma2rh_irq_disable, .mask = emma2rh_irq_disable, .mask_ack = emma2rh_irq_disable, .unmask = emma2rh_irq_enable, - .end = emma2rh_irq_end, }; void emma2rh_irq_init(u32 irq_base) diff --git a/arch/mips/emma2rh/markeins/irq_markeins.c b/arch/mips/emma2rh/markeins/irq_markeins.c index 3ac4e405ecdc..2116d9be5fa9 100644 --- a/arch/mips/emma2rh/markeins/irq_markeins.c +++ b/arch/mips/emma2rh/markeins/irq_markeins.c @@ -48,19 +48,12 @@ static void emma2rh_sw_irq_disable(unsigned int irq) ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base); } -static void emma2rh_sw_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base); -} - struct irq_chip emma2rh_sw_irq_controller = { .typename = "emma2rh_sw_irq", .ack = emma2rh_sw_irq_disable, .mask = emma2rh_sw_irq_disable, .mask_ack = emma2rh_sw_irq_disable, .unmask = emma2rh_sw_irq_enable, - .end = emma2rh_sw_irq_end, }; void emma2rh_sw_irq_init(u32 irq_base) diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index 5c4f50cdf157..f8d417b5c2bb 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -39,19 +39,12 @@ void disable_r4030_irq(unsigned int irq) spin_unlock_irqrestore(&r4030_lock, flags); } -static void end_r4030_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_r4030_irq(irq); -} - static struct irq_chip r4030_irq_type = { .typename = "R4030", .ack = disable_r4030_irq, .mask = disable_r4030_irq, .mask_ack = disable_r4030_irq, .unmask = enable_r4030_irq, - .end = end_r4030_irq, }; void __init init_r4030_ints(void) diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 2526c0ca4d81..b59a676c6d0e 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -19,9 +19,6 @@ #include <asm/i8259.h> #include <asm/io.h> -void enable_8259A_irq(unsigned int irq); -void disable_8259A_irq(unsigned int irq); - /* * This is the 'legacy' 8259A Programmable Interrupt Controller, * present in the majority of PC/AT boxes. @@ -31,23 +28,16 @@ void disable_8259A_irq(unsigned int irq); * moves to arch independent land */ +static int i8259A_auto_eoi; DEFINE_SPINLOCK(i8259A_lock); - -static void end_8259A_irq (unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) && - irq_desc[irq].action) - enable_8259A_irq(irq); -} - +/* some platforms call this... */ void mask_and_ack_8259A(unsigned int); -static struct irq_chip i8259A_irq_type = { - .typename = "XT-PIC", - .enable = enable_8259A_irq, - .disable = disable_8259A_irq, - .ack = mask_and_ack_8259A, - .end = end_8259A_irq, +static struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, }; /* @@ -59,8 +49,8 @@ static struct irq_chip i8259A_irq_type = { */ static unsigned int cached_irq_mask = 0xffff; -#define cached_21 (cached_irq_mask) -#define cached_A1 (cached_irq_mask >> 8) +#define cached_master_mask (cached_irq_mask) +#define cached_slave_mask (cached_irq_mask >> 8) void disable_8259A_irq(unsigned int irq) { @@ -70,9 +60,9 @@ void disable_8259A_irq(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask |= mask; if (irq & 8) - outb(cached_A1,0xA1); + outb(cached_slave_mask, PIC_SLAVE_IMR); else - outb(cached_21,0x21); + outb(cached_master_mask, PIC_MASTER_IMR); spin_unlock_irqrestore(&i8259A_lock, flags); } @@ -84,9 +74,9 @@ void enable_8259A_irq(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask &= mask; if (irq & 8) - outb(cached_A1,0xA1); + outb(cached_slave_mask, PIC_SLAVE_IMR); else - outb(cached_21,0x21); + outb(cached_master_mask, PIC_MASTER_IMR); spin_unlock_irqrestore(&i8259A_lock, flags); } @@ -98,9 +88,9 @@ int i8259A_irq_pending(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); if (irq < 8) - ret = inb(0x20) & mask; + ret = inb(PIC_MASTER_CMD) & mask; else - ret = inb(0xA0) & (mask >> 8); + ret = inb(PIC_SLAVE_CMD) & (mask >> 8); spin_unlock_irqrestore(&i8259A_lock, flags); return ret; @@ -109,7 +99,7 @@ int i8259A_irq_pending(unsigned int irq) void make_8259A_irq(unsigned int irq) { disable_irq_nosync(irq); - set_irq_chip(irq, &i8259A_irq_type); + set_irq_chip_and_handler(irq, &i8259A_chip, handle_level_irq); enable_irq(irq); } @@ -125,14 +115,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1 << irq; if (irq < 8) { - outb(0x0B,0x20); /* ISR register */ - value = inb(0x20) & irqmask; - outb(0x0A,0x20); /* back to the IRR register */ + outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + value = inb(PIC_MASTER_CMD) & irqmask; + outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ return value; } - outb(0x0B,0xA0); /* ISR register */ - value = inb(0xA0) & (irqmask >> 8); - outb(0x0A,0xA0); /* back to the IRR register */ + outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ return value; } @@ -149,17 +139,19 @@ void mask_and_ack_8259A(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); /* - * Lightweight spurious IRQ detection. We do not want to overdo - * spurious IRQ handling - it's usually a sign of hardware problems, so - * we only do the checks we can do without slowing down good hardware - * nnecesserily. + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. * - * Note that IRQ7 and IRQ15 (the two spurious IRQs usually resulting - * rom the 8259A-1|2 PICs) occur even if the IRQ is masked in the 8259A. - * Thus we can check spurious 8259A IRQs without doing the quite slow - * i8259A_irq_real() call for every IRQ. This does not cover 100% of - * spurious interrupts, but should be enough to warn the user that - * there is something bad going on ... + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... */ if (cached_irq_mask & irqmask) goto spurious_8259A_irq; @@ -167,14 +159,14 @@ void mask_and_ack_8259A(unsigned int irq) handle_real_irq: if (irq & 8) { - inb(0xA1); /* DUMMY - (do we need this?) */ - outb(cached_A1,0xA1); - outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */ - outb(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ } else { - inb(0x21); /* DUMMY - (do we need this?) */ - outb(cached_21,0x21); - outb(0x60+irq,0x20); /* 'Specific EOI' to master */ + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ } #ifdef CONFIG_MIPS_MT_SMTC if (irq_hwmask[irq] & ST0_IM) @@ -195,7 +187,7 @@ spurious_8259A_irq: goto handle_real_irq; { - static int spurious_irq_mask = 0; + static int spurious_irq_mask; /* * At this point we can be sure the IRQ is spurious, * lets ACK and report it. [once per IRQ] @@ -216,13 +208,25 @@ spurious_8259A_irq: static int i8259A_resume(struct sys_device *dev) { - init_8259A(0); + init_8259A(i8259A_auto_eoi); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ return 0; } static struct sysdev_class i8259_sysdev_class = { set_kset_name("i8259"), .resume = i8259A_resume, + .shutdown = i8259A_shutdown, }; static struct sys_device device_i8259A = { @@ -244,41 +248,41 @@ void __init init_8259A(int auto_eoi) { unsigned long flags; + i8259A_auto_eoi = auto_eoi; + spin_lock_irqsave(&i8259A_lock, flags); - outb(0xff, 0x21); /* mask all of 8259A-1 */ - outb(0xff, 0xA1); /* mask all of 8259A-2 */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ /* * outb_p - this has to work on a wide range of PC hardware. */ - outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */ - outb_p(0x00, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x00-0x07 */ - outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) - outb_p(0x03, 0x21); /* master does Auto EOI */ - else - outb_p(0x01, 0x21); /* master expects normal EOI */ - - outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */ - outb_p(0x08, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x08-0x0f */ - outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */ - outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode - is to be investigated) */ - + outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ + outb_p(I8259A_IRQ_BASE + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0 mapped to I8259A_IRQ_BASE + 0x00 */ + outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ + if (auto_eoi) /* master does Auto EOI */ + outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ + outb_p(I8259A_IRQ_BASE + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0 mapped to I8259A_IRQ_BASE + 0x08 */ + outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ if (auto_eoi) /* - * in AEOI mode we just have to mask the interrupt + * In AEOI mode we just have to mask the interrupt * when acking. */ - i8259A_irq_type.ack = disable_8259A_irq; + i8259A_chip.mask_ack = disable_8259A_irq; else - i8259A_irq_type.ack = mask_and_ack_8259A; + i8259A_chip.mask_ack = mask_and_ack_8259A; udelay(100); /* wait for 8259A to initialize */ - outb(cached_21, 0x21); /* restore master IRQ mask */ - outb(cached_A1, 0xA1); /* restore slave IRQ mask */ + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ spin_unlock_irqrestore(&i8259A_lock, flags); } @@ -291,11 +295,17 @@ static struct irqaction irq2 = { }; static struct resource pic1_io_resource = { - .name = "pic1", .start = 0x20, .end = 0x21, .flags = IORESOURCE_BUSY + .name = "pic1", + .start = PIC_MASTER_CMD, + .end = PIC_MASTER_IMR, + .flags = IORESOURCE_BUSY }; static struct resource pic2_io_resource = { - .name = "pic2", .start = 0xa0, .end = 0xa1, .flags = IORESOURCE_BUSY + .name = "pic2", + .start = PIC_SLAVE_CMD, + .end = PIC_SLAVE_IMR, + .flags = IORESOURCE_BUSY }; /* @@ -313,7 +323,7 @@ void __init init_i8259_irqs (void) init_8259A(0); for (i = 0; i < 16; i++) - set_irq_chip(i, &i8259A_irq_type); + set_irq_chip_and_handler(i, &i8259A_chip, handle_level_irq); - setup_irq(2, &irq2); + setup_irq(PIC_CASCADE_IR, &irq2); } diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c index 6cfb31cafde2..efbd219845b5 100644 --- a/arch/mips/kernel/irq-mv6434x.c +++ b/arch/mips/kernel/irq-mv6434x.c @@ -67,15 +67,6 @@ static inline void unmask_mv64340_irq(unsigned int irq) } /* - * End IRQ processing - */ -static void end_mv64340_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - unmask_mv64340_irq(irq); -} - -/* * Interrupt handler for interrupts coming from the Marvell chip. * It could be built in ethernet ports etc... */ @@ -106,7 +97,6 @@ struct irq_chip mv64340_irq_type = { .mask = mask_mv64340_irq, .mask_ack = mask_mv64340_irq, .unmask = unmask_mv64340_irq, - .end = end_mv64340_irq, }; void __init mv64340_irq_init(unsigned int base) diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index ddcc2a5f8a06..123324ba8c14 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -29,19 +29,12 @@ static inline void mask_rm7k_irq(unsigned int irq) clear_c0_intcontrol(0x100 << (irq - irq_base)); } -static void rm7k_cpu_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - unmask_rm7k_irq(irq); -} - static struct irq_chip rm7k_irq_controller = { .typename = "RM7000", .ack = mask_rm7k_irq, .mask = mask_rm7k_irq, .mask_ack = mask_rm7k_irq, .unmask = unmask_rm7k_irq, - .end = rm7k_cpu_irq_end, }; void __init rm7k_cpu_irq_init(int base) diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index ba6440c88abd..0e6f4c5349d2 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -80,19 +80,12 @@ static void rm9k_perfcounter_irq_shutdown(unsigned int irq) on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 0, 1); } -static void rm9k_cpu_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - unmask_rm9k_irq(irq); -} - static struct irq_chip rm9k_irq_controller = { .typename = "RM9000", .ack = mask_rm9k_irq, .mask = mask_rm9k_irq, .mask_ack = mask_rm9k_irq, .unmask = unmask_rm9k_irq, - .end = rm9k_cpu_irq_end, }; static struct irq_chip rm9k_perfcounter_irq = { @@ -103,7 +96,6 @@ static struct irq_chip rm9k_perfcounter_irq = { .mask = mask_rm9k_irq, .mask_ack = mask_rm9k_irq, .unmask = unmask_rm9k_irq, - .end = rm9k_cpu_irq_end, }; unsigned int rm9000_perfcount_irq; diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index b339798b3172..2fe4c868a801 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -117,7 +117,7 @@ int show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif - seq_printf(p, " %14s", irq_desc[i].chip->typename); + seq_printf(p, " %14s", irq_desc[i].chip->name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index be5ac23d3812..fcc86b96ccf6 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -50,12 +50,6 @@ static inline void mask_mips_irq(unsigned int irq) irq_disable_hazard(); } -static void mips_cpu_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - unmask_mips_irq(irq); -} - static struct irq_chip mips_cpu_irq_controller = { .typename = "MIPS", .ack = mask_mips_irq, @@ -63,7 +57,6 @@ static struct irq_chip mips_cpu_irq_controller = { .mask_ack = mask_mips_irq, .unmask = unmask_mips_irq, .eoi = unmask_mips_irq, - .end = mips_cpu_irq_end, }; /* @@ -96,8 +89,6 @@ static void mips_mt_cpu_irq_ack(unsigned int irq) mask_mips_mt_irq(irq); } -#define mips_mt_cpu_irq_end mips_cpu_irq_end - static struct irq_chip mips_mt_cpu_irq_controller = { .typename = "MIPS", .startup = mips_mt_cpu_irq_startup, @@ -106,7 +97,6 @@ static struct irq_chip mips_mt_cpu_irq_controller = { .mask_ack = mips_mt_cpu_irq_ack, .unmask = unmask_mips_mt_irq, .eoi = unmask_mips_mt_irq, - .end = mips_mt_cpu_irq_end, }; void __init mips_cpu_irq_init(int irq_base) diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index f06a144c7881..2c82412b9efe 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -319,7 +319,7 @@ static void sp_cleanup(void) static int channel_open = 0; /* the work handler */ -static void sp_work(void *data) +static void sp_work(struct work_struct *unused) { if (!channel_open) { if( rtlx_open(RTLX_CHANNEL_SYSIO, 1) != 0) { @@ -354,7 +354,7 @@ static void startwork(int vpe) return; } - INIT_WORK(&work, sp_work, NULL); + INIT_WORK(&work, sp_work); queue_work(workqueue, &work); } else queue_work(workqueue, &work); diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index 4a84a7beac53..2affa5ff171c 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -44,19 +44,12 @@ void enable_lasat_irq(unsigned int irq_nr) *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; } -static void end_lasat_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_lasat_irq(irq); -} - static struct irq_chip lasat_irq_type = { .typename = "Lasat", .ack = disable_lasat_irq, .mask = disable_lasat_irq, .mask_ack = disable_lasat_irq, .unmask = enable_lasat_irq, - .end = end_lasat_irq, }; static inline int ls1bit32(unsigned int x) diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c index e5a4a0a8a7f0..bb11fef08472 100644 --- a/arch/mips/momentum/ocelot_c/cpci-irq.c +++ b/arch/mips/momentum/ocelot_c/cpci-irq.c @@ -66,15 +66,6 @@ static inline void unmask_cpci_irq(unsigned int irq) } /* - * End IRQ processing - */ -static void end_cpci_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - unmask_cpci_irq(irq); -} - -/* * Interrupt handler for interrupts coming from the FPGA chip. * It could be built in ethernet ports etc... */ @@ -98,7 +89,6 @@ struct irq_chip cpci_irq_type = { .mask = mask_cpci_irq, .mask_ack = mask_cpci_irq, .unmask = unmask_cpci_irq, - .end = end_cpci_irq, }; void cpci_irq_init(void) diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c index 0029f0008dea..a7a80c0da569 100644 --- a/arch/mips/momentum/ocelot_c/uart-irq.c +++ b/arch/mips/momentum/ocelot_c/uart-irq.c @@ -60,15 +60,6 @@ static inline void unmask_uart_irq(unsigned int irq) } /* - * End IRQ processing - */ -static void end_uart_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - unmask_uart_irq(irq); -} - -/* * Interrupt handler for interrupts coming from the FPGA chip. */ void ll_uart_irq(void) @@ -91,7 +82,6 @@ struct irq_chip uart_irq_type = { .mask = mask_uart_irq, .mask_ack = mask_uart_irq, .unmask = unmask_uart_irq, - .end = end_uart_irq, }; void uart_irq_init(void) diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c index 0dc23930edbd..2c36c108c4d6 100644 --- a/arch/mips/philips/pnx8550/common/int.c +++ b/arch/mips/philips/pnx8550/common/int.c @@ -158,20 +158,12 @@ int pnx8550_set_gic_priority(int irq, int priority) return prev_priority; } -static void end_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - unmask_irq(irq); - } -} - static struct irq_chip level_irq_type = { .typename = "PNX Level IRQ", .ack = mask_irq, .mask = mask_irq, .mask_ack = mask_irq, .unmask = unmask_irq, - .end = end_irq, }; static struct irqaction gic_action = { diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index c7b138053159..c44f8be0644f 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -51,19 +51,12 @@ static void disable_local0_irq(unsigned int irq) sgint->imask0 &= ~(1 << (irq - SGINT_LOCAL0)); } -static void end_local0_irq (unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_local0_irq(irq); -} - static struct irq_chip ip22_local0_irq_type = { .typename = "IP22 local 0", .ack = disable_local0_irq, .mask = disable_local0_irq, .mask_ack = disable_local0_irq, .unmask = enable_local0_irq, - .end = end_local0_irq, }; static void enable_local1_irq(unsigned int irq) @@ -79,19 +72,12 @@ void disable_local1_irq(unsigned int irq) sgint->imask1 &= ~(1 << (irq - SGINT_LOCAL1)); } -static void end_local1_irq (unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_local1_irq(irq); -} - static struct irq_chip ip22_local1_irq_type = { .typename = "IP22 local 1", .ack = disable_local1_irq, .mask = disable_local1_irq, .mask_ack = disable_local1_irq, .unmask = enable_local1_irq, - .end = end_local1_irq, }; static void enable_local2_irq(unsigned int irq) @@ -107,19 +93,12 @@ void disable_local2_irq(unsigned int irq) sgint->imask0 &= ~(1 << (SGI_MAP_0_IRQ - SGINT_LOCAL0)); } -static void end_local2_irq (unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_local2_irq(irq); -} - static struct irq_chip ip22_local2_irq_type = { .typename = "IP22 local 2", .ack = disable_local2_irq, .mask = disable_local2_irq, .mask_ack = disable_local2_irq, .unmask = enable_local2_irq, - .end = end_local2_irq, }; static void enable_local3_irq(unsigned int irq) @@ -135,19 +114,12 @@ void disable_local3_irq(unsigned int irq) sgint->imask1 &= ~(1 << (SGI_MAP_1_IRQ - SGINT_LOCAL1)); } -static void end_local3_irq (unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_local3_irq(irq); -} - static struct irq_chip ip22_local3_irq_type = { .typename = "IP22 local 3", .ack = disable_local3_irq, .mask = disable_local3_irq, .mask_ack = disable_local3_irq, .unmask = enable_local3_irq, - .end = end_local3_irq, }; static void indy_local0_irqdispatch(void) diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 5f8835b4e84a..319f8803ef6f 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -332,13 +332,6 @@ static inline void disable_bridge_irq(unsigned int irq) intr_disconnect_level(cpu, swlevel); } -static void end_bridge_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) && - irq_desc[irq].action) - enable_bridge_irq(irq); -} - static struct irq_chip bridge_irq_type = { .typename = "bridge", .startup = startup_bridge_irq, @@ -347,7 +340,6 @@ static struct irq_chip bridge_irq_type = { .mask = disable_bridge_irq, .mask_ack = disable_bridge_irq, .unmask = enable_bridge_irq, - .end = end_bridge_irq, }; void __devinit register_bridge_irq(unsigned int irq) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 7d361726bbfb..c20e9899b34b 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -180,10 +180,6 @@ static void disable_rt_irq(unsigned int irq) { } -static void end_rt_irq(unsigned int irq) -{ -} - static struct irq_chip rt_irq_type = { .typename = "SN HUB RT timer", .ack = disable_rt_irq, @@ -191,7 +187,6 @@ static struct irq_chip rt_irq_type = { .mask_ack = disable_rt_irq, .unmask = enable_rt_irq, .eoi = enable_rt_irq, - .end = end_rt_irq, }; static struct irqaction rt_irqaction = { diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c index 21873de49aa8..ed4a19adf361 100644 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ b/arch/mips/tx4927/common/tx4927_irq.c @@ -66,12 +66,10 @@ #define TX4927_IRQ_CP0_INIT ( 1 << 10 ) #define TX4927_IRQ_CP0_ENABLE ( 1 << 13 ) #define TX4927_IRQ_CP0_DISABLE ( 1 << 14 ) -#define TX4927_IRQ_CP0_ENDIRQ ( 1 << 16 ) #define TX4927_IRQ_PIC_INIT ( 1 << 20 ) #define TX4927_IRQ_PIC_ENABLE ( 1 << 23 ) #define TX4927_IRQ_PIC_DISABLE ( 1 << 24 ) -#define TX4927_IRQ_PIC_ENDIRQ ( 1 << 26 ) #define TX4927_IRQ_ALL 0xffffffff #endif @@ -82,12 +80,10 @@ static const u32 tx4927_irq_debug_flag = (TX4927_IRQ_NONE | TX4927_IRQ_WARN | TX4927_IRQ_EROR // | TX4927_IRQ_CP0_INIT // | TX4927_IRQ_CP0_ENABLE -// | TX4927_IRQ_CP0_DISABLE // | TX4927_IRQ_CP0_ENDIRQ // | TX4927_IRQ_PIC_INIT // | TX4927_IRQ_PIC_ENABLE // | TX4927_IRQ_PIC_DISABLE -// | TX4927_IRQ_PIC_ENDIRQ // | TX4927_IRQ_INIT // | TX4927_IRQ_NEST1 // | TX4927_IRQ_NEST2 @@ -114,11 +110,9 @@ static const u32 tx4927_irq_debug_flag = (TX4927_IRQ_NONE static void tx4927_irq_cp0_enable(unsigned int irq); static void tx4927_irq_cp0_disable(unsigned int irq); -static void tx4927_irq_cp0_end(unsigned int irq); static void tx4927_irq_pic_enable(unsigned int irq); static void tx4927_irq_pic_disable(unsigned int irq); -static void tx4927_irq_pic_end(unsigned int irq); /* * Kernel structs for all pic's @@ -131,7 +125,6 @@ static struct irq_chip tx4927_irq_cp0_type = { .mask = tx4927_irq_cp0_disable, .mask_ack = tx4927_irq_cp0_disable, .unmask = tx4927_irq_cp0_enable, - .end = tx4927_irq_cp0_end, }; #define TX4927_PIC_NAME "TX4927-PIC" @@ -141,7 +134,6 @@ static struct irq_chip tx4927_irq_pic_type = { .mask = tx4927_irq_pic_disable, .mask_ack = tx4927_irq_pic_disable, .unmask = tx4927_irq_pic_enable, - .end = tx4927_irq_pic_end, }; #define TX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL } @@ -214,15 +206,6 @@ static void tx4927_irq_cp0_disable(unsigned int irq) tx4927_irq_cp0_modify(CCP0_STATUS, tx4927_irq_cp0_mask(irq), 0); } -static void tx4927_irq_cp0_end(unsigned int irq) -{ - TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_ENDIRQ, "irq=%d \n", irq); - - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - tx4927_irq_cp0_enable(irq); - } -} - /* * Functions for pic */ @@ -376,15 +359,6 @@ static void tx4927_irq_pic_disable(unsigned int irq) tx4927_irq_pic_mask(irq), 0); } -static void tx4927_irq_pic_end(unsigned int irq) -{ - TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_ENDIRQ, "irq=%d\n", irq); - - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - tx4927_irq_pic_enable(irq); - } -} - /* * Main init functions */ diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index 34cdb2a240e9..5a5ea6c0b9f6 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -153,7 +153,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #define TOSHIBA_RBTX4927_IRQ_IOC_INIT ( 1 << 10 ) #define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE ( 1 << 13 ) #define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE ( 1 << 14 ) -#define TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ ( 1 << 16 ) #define TOSHIBA_RBTX4927_IRQ_ISA_INIT ( 1 << 20 ) #define TOSHIBA_RBTX4927_IRQ_ISA_ENABLE ( 1 << 23 ) @@ -172,7 +171,6 @@ static const u32 toshiba_rbtx4927_irq_debug_flag = // | TOSHIBA_RBTX4927_IRQ_IOC_INIT // | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE // | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE -// | TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ // | TOSHIBA_RBTX4927_IRQ_ISA_INIT // | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE // | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE @@ -223,7 +221,6 @@ extern void mask_and_ack_8259A(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); -static void toshiba_rbtx4927_irq_ioc_end(unsigned int irq); #ifdef CONFIG_TOSHIBA_FPCIB0 static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq); @@ -239,7 +236,6 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { .mask = toshiba_rbtx4927_irq_ioc_disable, .mask_ack = toshiba_rbtx4927_irq_ioc_disable, .unmask = toshiba_rbtx4927_irq_ioc_enable, - .end = toshiba_rbtx4927_irq_ioc_end, }; #define TOSHIBA_RBTX4927_IOC_INTR_ENAB 0xbc002000 #define TOSHIBA_RBTX4927_IOC_INTR_STAT 0xbc002006 @@ -388,23 +384,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) TOSHIBA_RBTX4927_WR08(TOSHIBA_RBTX4927_IOC_INTR_ENAB, v); } -static void toshiba_rbtx4927_irq_ioc_end(unsigned int irq) -{ - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG - || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } - - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - toshiba_rbtx4927_irq_ioc_enable(irq); - } -} - /**********************************************************************************/ /* Functions for isa */ diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index 42e127683ae9..a347b424d91c 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c @@ -39,11 +39,9 @@ static void tx4938_irq_cp0_enable(unsigned int irq); static void tx4938_irq_cp0_disable(unsigned int irq); -static void tx4938_irq_cp0_end(unsigned int irq); static void tx4938_irq_pic_enable(unsigned int irq); static void tx4938_irq_pic_disable(unsigned int irq); -static void tx4938_irq_pic_end(unsigned int irq); /**********************************************************************************/ /* Kernel structs for all pic's */ @@ -56,7 +54,6 @@ static struct irq_chip tx4938_irq_cp0_type = { .mask = tx4938_irq_cp0_disable, .mask_ack = tx4938_irq_cp0_disable, .unmask = tx4938_irq_cp0_enable, - .end = tx4938_irq_cp0_end, }; #define TX4938_PIC_NAME "TX4938-PIC" @@ -66,7 +63,6 @@ static struct irq_chip tx4938_irq_pic_type = { .mask = tx4938_irq_pic_disable, .mask_ack = tx4938_irq_pic_disable, .unmask = tx4938_irq_pic_enable, - .end = tx4938_irq_pic_end, }; static struct irqaction tx4938_irq_pic_action = { @@ -104,14 +100,6 @@ tx4938_irq_cp0_disable(unsigned int irq) clear_c0_status(tx4938_irq_cp0_mask(irq)); } -static void -tx4938_irq_cp0_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - tx4938_irq_cp0_enable(irq); - } -} - /**********************************************************************************/ /* Functions for pic */ /**********************************************************************************/ @@ -269,14 +257,6 @@ tx4938_irq_pic_disable(unsigned int irq) tx4938_irq_pic_mask(irq), 0); } -static void -tx4938_irq_pic_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - tx4938_irq_pic_enable(irq); - } -} - /**********************************************************************************/ /* Main init functions */ /**********************************************************************************/ diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index 8c87a35f3068..b6f363d08011 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -89,7 +89,6 @@ IRQ Device static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); -static void toshiba_rbtx4938_irq_ioc_end(unsigned int irq); #define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { @@ -98,7 +97,6 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { .mask = toshiba_rbtx4938_irq_ioc_disable, .mask_ack = toshiba_rbtx4938_irq_ioc_disable, .unmask = toshiba_rbtx4938_irq_ioc_enable, - .end = toshiba_rbtx4938_irq_ioc_end, }; #define TOSHIBA_RBTX4938_IOC_INTR_ENAB 0xb7f02000 @@ -167,14 +165,6 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB); } -static void -toshiba_rbtx4938_irq_ioc_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - toshiba_rbtx4938_irq_ioc_enable(irq); - } -} - extern void __init txx9_spi_irqinit(int irc_irq); void __init arch_init_irq(void) diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 92f41f6f934a..c8dfd8092cab 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -6,6 +6,7 @@ config CASIO_E55 select ISA select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ config IBM_WORKPAD bool "Support for IBM WorkPad z50" @@ -15,6 +16,7 @@ config IBM_WORKPAD select ISA select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ config NEC_CMBVR4133 bool "Support for NEC CMB-VR4133" @@ -39,6 +41,7 @@ config TANBAC_TB022X select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ help The TANBAC VR4131 multichip module(TB0225) and the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms @@ -71,6 +74,7 @@ config VICTOR_MPC30X select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ config ZAO_CAPCELLA bool "Support for ZAO Networks Capcella" @@ -80,6 +84,7 @@ config ZAO_CAPCELLA select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ config PCI_VR41XX bool "Add PCI control unit support of NEC VR4100 series" diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 54b92a74c7ac..c075261976c5 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -427,19 +427,12 @@ static void enable_sysint1_irq(unsigned int irq) icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq)); } -static void end_sysint1_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq)); -} - static struct irq_chip sysint1_irq_type = { .typename = "SYSINT1", .ack = disable_sysint1_irq, .mask = disable_sysint1_irq, .mask_ack = disable_sysint1_irq, .unmask = enable_sysint1_irq, - .end = end_sysint1_irq, }; static void disable_sysint2_irq(unsigned int irq) @@ -452,19 +445,12 @@ static void enable_sysint2_irq(unsigned int irq) icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq)); } -static void end_sysint2_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq)); -} - static struct irq_chip sysint2_irq_type = { .typename = "SYSINT2", .ack = disable_sysint2_irq, .mask = disable_sysint2_irq, .mask_ack = disable_sysint2_irq, .unmask = enable_sysint2_irq, - .end = end_sysint2_irq, }; static inline int set_sysint1_assign(unsigned int irq, unsigned char assign) diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c index 31bcdae84823..0e837762cc5b 100644 --- a/arch/powerpc/platforms/embedded6xx/ls_uart.c +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -14,7 +14,7 @@ static unsigned long avr_clock; static struct work_struct wd_work; -static void wd_stop(void *unused) +static void wd_stop(struct work_struct *unused) { const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK"; int i = 0, rescue = 8; @@ -122,7 +122,7 @@ static int __init ls_uarts_init(void) ls_uart_init(); - INIT_WORK(&wd_work, wd_stop, NULL); + INIT_WORK(&wd_work, wd_stop); schedule_work(&wd_work); return 0; diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index afa593a8544a..c3a89414ddc0 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -18,11 +18,11 @@ #define OLD_BACKLIGHT_MAX 15 -static void pmac_backlight_key_worker(void *data); -static void pmac_backlight_set_legacy_worker(void *data); +static void pmac_backlight_key_worker(struct work_struct *work); +static void pmac_backlight_set_legacy_worker(struct work_struct *work); -static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL); -static DECLARE_WORK(pmac_backlight_set_legacy_work, pmac_backlight_set_legacy_worker, NULL); +static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker); +static DECLARE_WORK(pmac_backlight_set_legacy_work, pmac_backlight_set_legacy_worker); /* Although these variables are used in interrupt context, it makes no sense to * protect them. No user is able to produce enough key events per second and @@ -94,7 +94,7 @@ int pmac_backlight_curve_lookup(struct fb_info *info, int value) return level; } -static void pmac_backlight_key_worker(void *data) +static void pmac_backlight_key_worker(struct work_struct *work) { if (atomic_read(&kernel_backlight_disabled)) return; @@ -166,7 +166,7 @@ static int __pmac_backlight_set_legacy_brightness(int brightness) return error; } -static void pmac_backlight_set_legacy_worker(void *data) +static void pmac_backlight_set_legacy_worker(struct work_struct *work) { if (atomic_read(&kernel_backlight_disabled)) return; diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index 137077451316..49037edf7d39 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -37,8 +37,8 @@ /* EEH event workqueue setup. */ static DEFINE_SPINLOCK(eeh_eventlist_lock); LIST_HEAD(eeh_eventlist); -static void eeh_thread_launcher(void *); -DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL); +static void eeh_thread_launcher(struct work_struct *); +DECLARE_WORK(eeh_event_wq, eeh_thread_launcher); /* Serialize reset sequences for a given pci device */ DEFINE_MUTEX(eeh_event_mutex); @@ -103,7 +103,7 @@ static int eeh_event_handler(void * dummy) * eeh_thread_launcher * @dummy - unused */ -static void eeh_thread_launcher(void *dummy) +static void eeh_thread_launcher(struct work_struct *dummy) { if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0) printk(KERN_ERR "Failed to start EEH daemon\n"); diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index 2e1943e27819..709952c25f29 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -385,6 +385,7 @@ struct fcc_enet_private { phy_info_t *phy; struct work_struct phy_relink; struct work_struct phy_display_config; + struct net_device *dev; uint sequence_done; @@ -1391,10 +1392,11 @@ static phy_info_t *phy_info[] = { NULL }; -static void mii_display_status(void *data) +static void mii_display_status(struct work_struct *work) { - struct net_device *dev = data; - volatile struct fcc_enet_private *fep = dev->priv; + volatile struct fcc_enet_private *fep = + container_of(work, struct fcc_enet_private, phy_relink); + struct net_device *dev = fep->dev; uint s = fep->phy_status; if (!fep->link && !fep->old_link) { @@ -1428,10 +1430,12 @@ static void mii_display_status(void *data) printk(".\n"); } -static void mii_display_config(void *data) +static void mii_display_config(struct work_struct *work) { - struct net_device *dev = data; - volatile struct fcc_enet_private *fep = dev->priv; + volatile struct fcc_enet_private *fep = + container_of(work, struct fcc_enet_private, + phy_display_config); + struct net_device *dev = fep->dev; uint s = fep->phy_status; printk("%s: config: auto-negotiation ", dev->name); @@ -1758,8 +1762,9 @@ static int __init fec_enet_init(void) cep->phy_id_done = 0; cep->phy_addr = fip->fc_phyaddr; mii_queue(dev, mk_mii_read(MII_PHYSID1), mii_discover_phy); - INIT_WORK(&cep->phy_relink, mii_display_status, dev); - INIT_WORK(&cep->phy_display_config, mii_display_config, dev); + INIT_WORK(&cep->phy_relink, mii_display_status); + INIT_WORK(&cep->phy_display_config, mii_display_config); + cep->dev = dev; #endif /* CONFIG_USE_MDIO */ fip++; diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index 2f9fa9e3d331..e6c28fb423b2 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -173,6 +173,7 @@ struct fec_enet_private { uint phy_speed; phy_info_t *phy; struct work_struct phy_task; + struct net_device *dev; uint sequence_done; @@ -1263,10 +1264,11 @@ static void mii_display_status(struct net_device *dev) printk(".\n"); } -static void mii_display_config(void *priv) +static void mii_display_config(struct work_struct *work) { - struct net_device *dev = (struct net_device *)priv; - struct fec_enet_private *fep = dev->priv; + struct fec_enet_private *fep = + container_of(work, struct fec_enet_private, phy_task); + struct net_device *dev = fep->dev; volatile uint *s = &(fep->phy_status); printk("%s: config: auto-negotiation ", dev->name); @@ -1295,10 +1297,11 @@ static void mii_display_config(void *priv) fep->sequence_done = 1; } -static void mii_relink(void *priv) +static void mii_relink(struct work_struct *work) { - struct net_device *dev = (struct net_device *)priv; - struct fec_enet_private *fep = dev->priv; + struct fec_enet_private *fep = + container_of(work, struct fec_enet_private, phy_task); + struct net_device *dev = fep->dev; int duplex; fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; @@ -1325,7 +1328,8 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = dev->priv; - INIT_WORK(&fep->phy_task, mii_relink, (void *)dev); + fep->dev = dev; + INIT_WORK(&fep->phy_task, mii_relink); schedule_work(&fep->phy_task); } @@ -1333,7 +1337,8 @@ static void mii_queue_config(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = dev->priv; - INIT_WORK(&fep->phy_task, mii_display_config, (void *)dev); + fep->dev = dev; + INIT_WORK(&fep->phy_task, mii_display_config); schedule_work(&fep->phy_task); } diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index af1e8fc7d985..67d5cf9cba83 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -92,8 +92,8 @@ static int appldata_timer_active; * Work queue */ static struct workqueue_struct *appldata_wq; -static void appldata_work_fn(void *data); -static DECLARE_WORK(appldata_work, appldata_work_fn, NULL); +static void appldata_work_fn(struct work_struct *work); +static DECLARE_WORK(appldata_work, appldata_work_fn); /* @@ -125,7 +125,7 @@ static void appldata_timer_function(unsigned long data) * * call data gathering function for each (active) module */ -static void appldata_work_fn(void *data) +static void appldata_work_fn(struct work_struct *work) { struct list_head *lh; struct appldata_ops *ops; diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index bffc7e176970..d83d64af31f2 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -51,6 +51,14 @@ config GENERIC_TIME config ARCH_MAY_HAVE_PC_FDC bool +config STACKTRACE_SUPPORT + bool + default y + +config LOCKDEP_SUPPORT + bool + default y + source "init/Kconfig" menu "System type" @@ -219,6 +227,20 @@ config SH_SHMIN help Select SHMIN if configuring for the SHMIN board. +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + config SH_UNKNOWN bool "BareCPU" help @@ -280,12 +302,20 @@ config CF_BASE_ADDR menu "Processor features" -config CPU_LITTLE_ENDIAN - bool "Little Endian" +choice + prompt "Endianess selection" + default CPU_LITTLE_ENDIAN help Some SuperH machines can be configured for either little or big - endian byte order. These modes require different kernels. Say Y if - your machine is little endian, N if it's a big endian machine. + endian byte order. These modes require different kernels. + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + +config CPU_BIG_ENDIAN + bool "Big Endian" + +endchoice config SH_FPU bool "FPU support" @@ -345,6 +375,9 @@ config CPU_HAS_MASKREG_IRQ config CPU_HAS_INTC2_IRQ bool +config CPU_HAS_IPR_IRQ + bool + config CPU_HAS_SR_RB bool "CPU has SR.RB" depends on CPU_SH3 || CPU_SH4 @@ -357,6 +390,9 @@ config CPU_HAS_SR_RB See <file:Documentation/sh/register-banks.txt> for further information on SR.RB and register banking in the kernel in general. +config CPU_HAS_PTEA + bool + endmenu menu "Timer support" @@ -364,10 +400,25 @@ depends on !GENERIC_TIME config SH_TMU bool "TMU timer support" + depends on CPU_SH3 || CPU_SH4 default y help This enables the use of the TMU as the system timer. +config SH_CMT + bool "CMT timer support" + depends on CPU_SH2 + default y + help + This enables the use of the CMT as the system timer. + +config SH_MTU2 + bool "MTU2 timer support" + depends on CPU_SH2A + default n + help + This enables the use of the MTU2 as the system timer. + endmenu source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" @@ -376,19 +427,52 @@ source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" +config SH_TIMER_IRQ + int + default "28" if CPU_SUBTYPE_SH7780 + default "86" if CPU_SUBTYPE_SH7619 + default "140" if CPU_SUBTYPE_SH7206 + default "16" + +config NO_IDLE_HZ + bool "Dynamic tick timer" + help + Select this option if you want to disable continuous timer ticks + and have them programmed to occur as required. This option saves + power as the system can remain in idle state for longer. + + By default dynamic tick is disabled during the boot, and can be + manually enabled with: + + echo 1 > /sys/devices/system/timer/timer0/dyn_tick + + Alternatively, if you want dynamic tick automatically enabled + during boot, pass "dyntick=enable" via the kernel command string. + + Please note that dynamic tick may affect the accuracy of + timekeeping on some platforms depending on the implementation. + config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" + default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 + default "31250000" if CPU_SUBTYPE_SH7619 + default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ + CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ + CPU_SUBTYPE_SH7206 default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 default "60000000" if CPU_SUBTYPE_SH7751 - default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ - CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 - default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 default "66000000" if CPU_SUBTYPE_SH4_202 help This option is used to specify the peripheral clock frequency. This is necessary for determining the reference clock value on platforms lacking an RTC. +config SH_CLK_MD + int "CPU Mode Pin Setting" + depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + help + MD2 - MD0 Setting. + menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" @@ -421,6 +505,8 @@ config HEARTBEAT behavior is platform-dependent, but normally the flash frequency is a hyperbolic function of the 5-minute load average. +source "arch/sh/drivers/Kconfig" + endmenu config ISA_DMA_API diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 48479e014dac..66a25ef4ef1b 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -1,5 +1,9 @@ menu "Kernel hacking" +config TRACE_IRQFLAGS_SUPPORT + bool + default y + source "lib/Kconfig.debug" config SH_STANDARD_BIOS @@ -17,7 +21,18 @@ config SH_STANDARD_BIOS config EARLY_SCIF_CONSOLE bool "Use early SCIF console" - depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS + help + This enables an early console using a fixed SCIF port. This can + be used by platforms that are either not running the SH + standard BIOS, or do not wish to use the BIOS callbacks for the + serial I/O. + +config EARLY_SCIF_CONSOLE_PORT + hex "SCIF port for early console" + depends on EARLY_SCIF_CONSOLE + default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xfffe9800" if CPU_SUBTYPE_SH72060 + default "0xffe80000" if CPU_SH4 config EARLY_PRINTK bool "Early printk support" @@ -30,6 +45,11 @@ config EARLY_PRINTK when the kernel may crash or hang before the serial console is initialised. If unsure, say N. + On devices that are running SH-IPL and want to keep the port + initialization consistent while not using the BIOS callbacks, + select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using + the kernel command line option to toggle back and forth. + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 26d62ff51a64..d10bba5e1074 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -13,10 +13,6 @@ # for "archclean" and "archdep" for cleaning up and making dependencies for # this architecture # - -cflags-y := -mb -cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml - isa-y := any isa-$(CONFIG_SH_DSP) := sh isa-$(CONFIG_CPU_SH2) := sh2 @@ -38,13 +34,16 @@ isa-y := $(isa-y)-nofpu endif endif -cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) - -cflags-$(CONFIG_CPU_SH2) += -m2 -cflags-$(CONFIG_CPU_SH3) += -m3 -cflags-$(CONFIG_CPU_SH4) += -m4 \ +cflags-$(CONFIG_CPU_SH2) := -m2 +cflags-$(CONFIG_CPU_SH3) := -m3 +cflags-$(CONFIG_CPU_SH4) := -m4 \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) -cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a-nofpu,) +cflags-$(CONFIG_CPU_SH4A) := -m4a $(call cc-option,-m4a-nofpu,) + +cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml + +cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding cflags-$(CONFIG_SH_DSP) += -Wa,-dsp cflags-$(CONFIG_SH_KGDB) += -g @@ -59,7 +58,9 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S # never be used by anyone. Use a board-specific defconfig that has a # reasonable chance of being current instead. # -KBUILD_DEFCONFIG := rts7751r2d_defconfig +KBUILD_DEFCONFIG := r7780rp_defconfig + +KBUILD_IMAGE := arch/sh/boot/zImage # # Choosing incompatible machines durings configuration will result in @@ -109,6 +110,8 @@ machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev machdir-$(CONFIG_SH_LANDISK) := landisk machdir-$(CONFIG_SH_TITAN) := titan machdir-$(CONFIG_SH_SHMIN) := shmin +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619 machdir-$(CONFIG_SH_UNKNOWN) := unknown incdir-y := $(notdir $(machdir-y)) @@ -124,6 +127,7 @@ core-$(CONFIG_HD64465) += arch/sh/cchips/hd6446x/hd64465/ core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 +cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index f1776d027978..574b0316ed56 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -3,4 +3,6 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o + +obj-$(CONFIG_HEARTBEAT) += led.o +obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c index aa15ec5bc69e..cc381e197783 100644 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -10,6 +10,7 @@ */ #include <linux/init.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <asm/r7780rp.h> diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c new file mode 100644 index 000000000000..c844dfa5d58d --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/psw.c @@ -0,0 +1,122 @@ +/* + * arch/sh/boards/renesas/r7780rp/psw.c + * + * push switch support for RDBRP-1/RDBREVRP-1 debug boards. + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/io.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/mach/r7780rp.h> +#include <asm/push-switch.h> + +static irqreturn_t psw_irq_handler(int irq, void *arg) +{ + struct platform_device *pdev = arg; + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + unsigned int l, mask; + int ret = 0; + + l = ctrl_inw(PA_DBSW); + + /* Nothing to do if there's no state change */ + if (psw->state) { + ret = 1; + goto out; + } + + mask = l & 0x70; + /* Figure out who raised it */ + if (mask & (1 << psw_info->bit)) { + psw->state = !!(mask & (1 << psw_info->bit)); + if (psw->state) /* debounce */ + mod_timer(&psw->debounce, jiffies + 50); + + ret = 1; + } + +out: + /* Clear the switch IRQs */ + l |= (0x7 << 12); + ctrl_outw(l, PA_DBSW); + + return IRQ_RETVAL(ret); +} + +static struct resource psw_resources[] = { + [0] = { + .start = IRQ_PSW, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct push_switch_platform_info s2_platform_data = { + .name = "s2", + .bit = 6, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s2_switch_device = { + .name = "push-switch", + .id = 0, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s2_platform_data, + }, +}; + +static struct push_switch_platform_info s3_platform_data = { + .name = "s3", + .bit = 5, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s3_switch_device = { + .name = "push-switch", + .id = 1, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s3_platform_data, + }, +}; + +static struct push_switch_platform_info s4_platform_data = { + .name = "s4", + .bit = 4, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s4_switch_device = { + .name = "push-switch", + .id = 2, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s4_platform_data, + }, +}; + +static struct platform_device *psw_devices[] = { + &s2_switch_device, &s3_switch_device, &s4_switch_device, +}; + +static int __init psw_init(void) +{ + return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); +} +module_init(psw_init); diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index c331caeb694b..9f89c8de9db9 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -44,8 +44,37 @@ static struct platform_device m66596_usb_host_device = { .resource = m66596_usb_host_resources, }; +static struct resource cf_ide_resources[] = { + [0] = { + .start = 0x1f0, + .end = 0x1f0 + 8, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 0x1f0 + 0x206, + .end = 0x1f0 + 8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { +#ifdef CONFIG_SH_R7780MP + .start = 1, +#else + .start = 4, +#endif + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + static struct platform_device *r7780rp_devices[] __initdata = { &m66596_usb_host_device, + &cf_ide_device, }; static int __init r7780rp_devices_setup(void) diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile new file mode 100644 index 000000000000..63950f4f2453 --- /dev/null +++ b/arch/sh/boards/se/7206/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7206 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o + diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c new file mode 100644 index 000000000000..b557273e0cbe --- /dev/null +++ b/arch/sh/boards/se/7206/io.c @@ -0,0 +1,123 @@ +/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ + * + * linux/arch/sh/boards/se/7206/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7206 SolutionEngine. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se7206.h> + + +static inline void delay(void) +{ + ctrl_inw(0x20000000); /* P2 ROM Area */ +} + +/* MS7750 requires special versions of in*, out* routines, since + PC-like io ports are located at upper half byte of 16-bit word which + can be accessed only with 16-bit wide. */ + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + else if (port >= 0x300 || port < 0x310) + return (volatile __u16 *) (PA_SMSC + (port - 0x300)); +} + +unsigned char se7206_inb(unsigned long port) +{ + return (*port2adr(port))&0xff; +} + +unsigned char se7206_inb_p(unsigned long port) +{ + unsigned long v; + + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short se7206_inw(unsigned long port) +{ + return *port2adr(port);; +} + +unsigned int se7206_inl(unsigned long port) +{ + maybebadio(port); + return 0; +} + +void se7206_outb(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; +} + +void se7206_outb_p(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; + delay(); +} + +void se7206_outw(unsigned short value, unsigned long port) +{ + *port2adr(port) = value; +} + +void se7206_outl(unsigned int value, unsigned long port) +{ + maybebadio(port); +} + +void se7206_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u8 *ap = addr; + + while (count--) + *ap++ = *p; +} + +void se7206_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u16 *ap = addr; + while (count--) + *ap++ = *p; +} + +void se7206_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(port); +} + +void se7206_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u8 *ap = addr; + + while (count--) + *p = *ap++; +} + +void se7206_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u16 *ap = addr; + while (count--) + *p = *ap++; +} + +void se7206_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(port); +} diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c new file mode 100644 index 000000000000..3fb0c5f5b23a --- /dev/null +++ b/arch/sh/boards/se/7206/irq.c @@ -0,0 +1,139 @@ +/* + * linux/arch/sh/boards/se/7206/irq.c + * + * Copyright (C) 2005,2006 Yoshinori Sato + * + * Hitachi SolutionEngine Support. + * + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <asm/se7206.h> + +#define INTSTS0 0x31800000 +#define INTSTS1 0x31800002 +#define INTMSK0 0x31800004 +#define INTMSK1 0x31800006 +#define INTSEL 0x31800008 + +static void disable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set the priority in IPR to 0 */ + val = ctrl_inw(INTC_IPR01); + val &= mask; + ctrl_outw(val, INTC_IPR01); + /* FPGA mask set */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 |= 0x0010; + break; + case IRQ1_IRQ: + msk0 |= 0x000f; + break; + case IRQ2_IRQ: + msk0 |= 0x0f00; + msk1 |= 0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static void enable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set priority in IPR back to original value */ + val = ctrl_inw(INTC_IPR01); + val |= value; + ctrl_outw(val, INTC_IPR01); + + /* FPGA mask reset */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 &= ~0x0010; + break; + case IRQ1_IRQ: + msk0 &= ~0x000f; + break; + case IRQ2_IRQ: + msk0 &= ~0x0f00; + msk1 &= ~0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static void eoi_se7206_irq(unsigned int irq) +{ + unsigned short sts0,sts1; + + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_se7206_irq(irq); + /* FPGA isr clear */ + sts0 = ctrl_inw(INTSTS0); + sts1 = ctrl_inw(INTSTS1); + + switch (irq) { + case IRQ0_IRQ: + sts0 &= ~0x0010; + break; + case IRQ1_IRQ: + sts0 &= ~0x000f; + break; + case IRQ2_IRQ: + sts0 &= ~0x0f00; + sts1 &= ~0x00ff; + break; + } + ctrl_outw(sts0, INTSTS0); + ctrl_outw(sts1, INTSTS1); +} + +static struct irq_chip se7206_irq_chip __read_mostly = { + .name = "SE7206-FPGA-IRQ", + .mask = disable_se7206_irq, + .unmask = enable_se7206_irq, + .mask_ack = disable_se7206_irq, + .eoi = eoi_se7206_irq, +}; + +static void make_se7206_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &se7206_irq_chip, + handle_level_irq, "level"); + disable_se7206_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_se7206_IRQ(void) +{ + make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ + make_se7206_irq(IRQ1_IRQ); /* ATA */ + make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ + ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + /* FPGA System register setup*/ + ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ + ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ + ctrl_outw(0x0001,INTSEL); +} diff --git a/arch/sh/boards/se/7206/led.c b/arch/sh/boards/se/7206/led.c new file mode 100644 index 000000000000..ef794601ab86 --- /dev/null +++ b/arch/sh/boards/se/7206/led.c @@ -0,0 +1,57 @@ +/* + * linux/arch/sh/kernel/led_se.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include <linux/config.h> +#include <asm/se7206.h> + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if (up) { + if (bit == 7) { + bit--; + up=0; + } else { + bit ++; + } + } else { + if (bit == 0) { + bit++; + up=1; + } else { + bit--; + } + } + *p = 1<<(bit+8); + +} +#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c new file mode 100644 index 000000000000..0f42e91a3238 --- /dev/null +++ b/arch/sh/boards/se/7206/setup.c @@ -0,0 +1,79 @@ +/* + * + * linux/arch/sh/boards/se/7206/setup.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * Hitachi 7206 SolutionEngine Support. + * + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/se7206.h> +#include <asm/io.h> +#include <asm/machvec.h> + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x300, + .end = 0x300 + 0x020 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init se7206_devices_setup(void) +{ + return platform_device_register(&smc91x_device); +} + +__initcall(se7206_devices_setup); + +void heartbeat_se(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 256, + .mv_inb = se7206_inb, + .mv_inw = se7206_inw, + .mv_inl = se7206_inl, + .mv_outb = se7206_outb, + .mv_outw = se7206_outw, + .mv_outl = se7206_outl, + + .mv_inb_p = se7206_inb_p, + .mv_inw_p = se7206_inw, + .mv_inl_p = se7206_inl, + .mv_outb_p = se7206_outb_p, + .mv_outw_p = se7206_outw, + .mv_outl_p = se7206_outl, + + .mv_insb = se7206_insb, + .mv_insw = se7206_insw, + .mv_insl = se7206_insl, + .mv_outsb = se7206_outsb, + .mv_outsw = se7206_outsw, + .mv_outsl = se7206_outsl, + + .mv_init_irq = init_se7206_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_se, +#endif +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile new file mode 100644 index 000000000000..3666eca8a658 --- /dev/null +++ b/arch/sh/boards/se/7619/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 7619 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o diff --git a/arch/sh/boards/se/7619/io.c b/arch/sh/boards/se/7619/io.c new file mode 100644 index 000000000000..176f1f39cd9d --- /dev/null +++ b/arch/sh/boards/se/7619/io.c @@ -0,0 +1,102 @@ +/* + * + * linux/arch/sh/boards/se/7619/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7619 SolutionEngine. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se7619.h> +#include <asm/irq.h> + +/* FIXME: M3A-ZAB7 Compact Flash Slot support */ + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */ +} + +#define badio(name,port) \ + printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +unsigned char se7619___inb(unsigned long port) +{ + badio(inb, port); + return 0; +} + +unsigned char se7619___inb_p(unsigned long port) +{ + badio(inb_p, port); + delay(); + return 0; +} + +unsigned short se7619___inw(unsigned long port) +{ + badio(inw, port); + return 0; +} + +unsigned int se7619___inl(unsigned long port) +{ + badio(inl, port); + return 0; +} + +void se7619___outb(unsigned char value, unsigned long port) +{ + badio(outb, port); +} + +void se7619___outb_p(unsigned char value, unsigned long port) +{ + badio(outb_p, port); + delay(); +} + +void se7619___outw(unsigned short value, unsigned long port) +{ + badio(outw, port); +} + +void se7619___outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void se7619___insb(unsigned long port, void *addr, unsigned long count) +{ + badio(inw, port); +} + +void se7619___insw(unsigned long port, void *addr, unsigned long count) +{ + badio(inw, port); +} + +void se7619___insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsb(unsigned long port, const void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsw(unsigned long port, const void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c new file mode 100644 index 000000000000..e627b26de0d0 --- /dev/null +++ b/arch/sh/boards/se/7619/setup.c @@ -0,0 +1,43 @@ +/* + * arch/sh/boards/se/7619/setup.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * Hitachi SH7619 SolutionEngine Support. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/io.h> +#include <asm/se7619.h> +#include <asm/machvec.h> + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 108, + .mv_inb = se7619___inb, + .mv_inw = se7619___inw, + .mv_inl = se7619___inl, + .mv_outb = se7619___outb, + .mv_outw = se7619___outw, + .mv_outl = se7619___outl, + + .mv_inb_p = se7619___inb_p, + .mv_inw_p = se7619___inw, + .mv_inl_p = se7619___inl, + .mv_outb_p = se7619___outb_p, + .mv_outw_p = se7619___outw, + .mv_outl_p = se7619___outl, + + .mv_insb = se7619___insb, + .mv_insw = se7619___insw, + .mv_insl = se7619___insl, + .mv_outsb = se7619___outsb, + .mv_outsw = se7619___outsw, + .mv_outsl = se7619___outsl, +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index a6046d93758b..6bcd939bfaed 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -1,26 +1,30 @@ /* - * Setup for Titan + * arch/sh/boards/titan/setup.c - Setup for Titan + * + * Copyright (C) 2006 Jamie Lenehan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/init.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/titan.h> #include <asm/io.h> -extern void __init pcibios_init_platform(void); - static struct ipr_data titan_ipr_map[] = { - { TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, - { TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, - { TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, - { TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, + /* IRQ, IPR idx, shift, prio */ + { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */ + { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */ + { TITAN_IRQ_MPCIA, 3, 4, 8 }, /* mPCI A (top) */ + { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */ }; static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - + ipr_irq_enable_irlm(); + /* register ipr irqs */ make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map)); } @@ -47,6 +51,5 @@ struct sh_machine_vector mv_titan __initmv = { .mv_ioport_map = titan_ioport_map, .mv_init_irq = init_titan_irq, - .mv_init_pci = pcibios_init_platform, }; ALIAS_MV(titan) diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index f2fed5ce5cc3..35452d85b7f7 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -12,6 +12,7 @@ */ #include <asm/uaccess.h> +#include <asm/addrspace.h> #ifdef CONFIG_SH_STANDARD_BIOS #include <asm/sh_bios.h> #endif @@ -228,7 +229,7 @@ long* stack_start = &user_stack[STACK_SIZE]; void decompress_kernel(void) { output_data = 0; - output_ptr = (unsigned long)&_text+0x20001000; + output_ptr = P2SEGADDR((unsigned long)&_text+0x1000); free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig index 34e2046c3213..2b75b4896ba5 100644 --- a/arch/sh/configs/r7780rp_defconfig +++ b/arch/sh/configs/r7780rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc3 -# Tue Oct 31 12:32:06 2006 +# Linux kernel version: 2.6.19 +# Wed Dec 6 11:59:38 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -11,6 +11,8 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -37,6 +39,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -118,6 +121,8 @@ CONFIG_SH_R7780RP=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set # CONFIG_SH_UNKNOWN is not set # @@ -130,6 +135,12 @@ CONFIG_CPU_SH4A=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -165,6 +176,7 @@ CONFIG_CPU_SH4A=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support @@ -181,8 +193,14 @@ CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 # CONFIG_32BIT is not set CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -204,12 +222,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_INTC2_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support @@ -220,6 +240,8 @@ CONFIG_SH_TMU=y # R7780RP options # CONFIG_SH_R7780MP=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_NO_IDLE_HZ=y CONFIG_SH_PCLK_FREQ=32000000 # @@ -238,13 +260,18 @@ CONFIG_SH_PCLK_FREQ=32000000 # CONFIG_HD6446X_SERIES is not set # +# Additional SuperH Device Drivers +# +CONFIG_PUSH_SWITCH=y + +# # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_KEXEC is not set +CONFIG_KEXEC=y # CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set @@ -278,10 +305,7 @@ CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # # PCI Hotplug Support # -CONFIG_HOTPLUG_PCI=y -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -341,6 +365,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -556,6 +581,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set @@ -572,6 +598,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y # # Multi-device support (RAID and LVM) @@ -688,6 +715,7 @@ CONFIG_R8169=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -830,10 +858,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -1020,7 +1044,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -1052,7 +1076,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1153,28 +1177,33 @@ CONFIG_NLS_ISO8859_1=y # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set @@ -1184,7 +1213,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set +CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_KGDB is not set diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig new file mode 100644 index 000000000000..36cec0b6e7c1 --- /dev/null +++ b/arch/sh/configs/se7206_defconfig @@ -0,0 +1,826 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc4 +# Sun Nov 5 16:20:10 2006 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_7343_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_7710VOIPGW is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_SHMIN is not set +CONFIG_SH_7206_SOLUTION_ENGINE=y +# CONFIG_SH_7619_SOLUTION_ENGINE is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +CONFIG_CPU_SUBTYPE_SH7206=y + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# SH4AL-DSP Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set + +# +# Memory management options +# +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +# CONFIG_SH_DSP is not set + +# +# Timer support +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_MD=6 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_KEXEC is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_SYSFS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig new file mode 100644 index 000000000000..c54c758e6243 --- /dev/null +++ b/arch/sh/drivers/Kconfig @@ -0,0 +1,9 @@ +menu "Additional SuperH Device Drivers" + +config PUSH_SWITCH + tristate "Push switch support" + help + This enables support for the push switch framework, a simple + framework that allows for sysfs driven switch status reporting. + +endmenu diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index 338c3729d270..bf18dbfb6787 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_SH_DMA) += dma/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ - +obj-$(CONFIG_PUSH_SWITCH) += push-switch.o diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile index 065d4c90970e..db1295d32268 100644 --- a/arch/sh/drivers/dma/Makefile +++ b/arch/sh/drivers/dma/Makefile @@ -2,8 +2,8 @@ # Makefile for the SuperH DMA specific kernel interface routines under Linux. # -obj-y += dma-api.o dma-isa.o +obj-y += dma-api.o +obj-$(CONFIG_ISA_DMA_API) += dma-isa.o obj-$(CONFIG_SYSFS) += dma-sysfs.o obj-$(CONFIG_SH_DMA) += dma-sh.o obj-$(CONFIG_SH_DREAMCAST) += dma-pvr2.o dma-g2.o - diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c index 47c3e837599b..e062067edd24 100644 --- a/arch/sh/drivers/dma/dma-api.c +++ b/arch/sh/drivers/dma/dma-api.c @@ -11,61 +11,27 @@ */ #include <linux/init.h> #include <linux/module.h> -#include <linux/interrupt.h> #include <linux/spinlock.h> #include <linux/proc_fs.h> #include <linux/list.h> #include <linux/platform_device.h> +#include <linux/mm.h> #include <asm/dma.h> DEFINE_SPINLOCK(dma_spin_lock); static LIST_HEAD(registered_dmac_list); -/* - * A brief note about the reasons for this API as it stands. - * - * For starters, the old ISA DMA API didn't work for us for a number of - * reasons, for one, the vast majority of channels on the SH DMAC are - * dual-address mode only, and both the new and the old DMA APIs are after the - * concept of managing a DMA buffer, which doesn't overly fit this model very - * well. In addition to which, the new API is largely geared at IOMMUs and - * GARTs, and doesn't even support the channel notion very well. - * - * The other thing that's a marginal issue, is the sheer number of random DMA - * engines that are present (ie, in boards like the Dreamcast), some of which - * cascade off of the SH DMAC, and others do not. As such, there was a real - * need for a scalable subsystem that could deal with both single and - * dual-address mode usage, in addition to interoperating with cascaded DMACs. - * - * There really isn't any reason why this needs to be SH specific, though I'm - * not aware of too many other processors (with the exception of some MIPS) - * that have the same concept of a dual address mode, or any real desire to - * actually make use of the DMAC even if such a subsystem were exposed - * elsewhere. - * - * The idea for this was derived from the ARM port, which acted as an excellent - * reference when trying to address these issues. - * - * It should also be noted that the decision to add Yet Another DMA API(tm) to - * the kernel wasn't made easily, and was only decided upon after conferring - * with jejb with regards to the state of the old and new APIs as they applied - * to these circumstances. Philip Blundell was also a great help in figuring - * out some single-address mode DMA semantics that were otherwise rather - * confusing. - */ - struct dma_info *get_dma_info(unsigned int chan) { struct dma_info *info; - unsigned int total = 0; /* * Look for each DMAC's range to determine who the owner of * the channel is. */ list_for_each_entry(info, ®istered_dmac_list, list) { - total += info->nr_channels; - if (chan > total) + if ((chan < info->first_channel_nr) || + (chan >= info->first_channel_nr + info->nr_channels)) continue; return info; @@ -73,6 +39,22 @@ struct dma_info *get_dma_info(unsigned int chan) return NULL; } +EXPORT_SYMBOL(get_dma_info); + +struct dma_info *get_dma_info_by_name(const char *dmac_name) +{ + struct dma_info *info; + + list_for_each_entry(info, ®istered_dmac_list, list) { + if (dmac_name && (strcmp(dmac_name, info->name) != 0)) + continue; + else + return info; + } + + return NULL; +} +EXPORT_SYMBOL(get_dma_info_by_name); static unsigned int get_nr_channels(void) { @@ -91,63 +73,161 @@ static unsigned int get_nr_channels(void) struct dma_channel *get_dma_channel(unsigned int chan) { struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel; + int i; - if (!info) + if (unlikely(!info)) return ERR_PTR(-EINVAL); - return info->channels + chan; + for (i = 0; i < info->nr_channels; i++) { + channel = &info->channels[i]; + if (channel->chan == chan) + return channel; + } + + return NULL; } +EXPORT_SYMBOL(get_dma_channel); int get_dma_residue(unsigned int chan) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (info->ops->get_residue) return info->ops->get_residue(channel); return 0; } +EXPORT_SYMBOL(get_dma_residue); -int request_dma(unsigned int chan, const char *dev_id) +static int search_cap(const char **haystack, const char *needle) { - struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + const char **p; + + for (p = haystack; *p; p++) + if (strcmp(*p, needle) == 0) + return 1; + + return 0; +} + +/** + * request_dma_bycap - Allocate a DMA channel based on its capabilities + * @dmac: List of DMA controllers to search + * @caps: List of capabilites + * + * Search all channels of all DMA controllers to find a channel which + * matches the requested capabilities. The result is the channel + * number if a match is found, or %-ENODEV if no match is found. + * + * Note that not all DMA controllers export capabilities, in which + * case they can never be allocated using this API, and so + * request_dma() must be used specifying the channel number. + */ +int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id) +{ + unsigned int found = 0; + struct dma_info *info; + const char **p; + int i; + + BUG_ON(!dmac || !caps); + + list_for_each_entry(info, ®istered_dmac_list, list) + if (strcmp(*dmac, info->name) == 0) { + found = 1; + break; + } + + if (!found) + return -ENODEV; + + for (i = 0; i < info->nr_channels; i++) { + struct dma_channel *channel = &info->channels[i]; + + if (unlikely(!channel->caps)) + continue; + + for (p = caps; *p; p++) { + if (!search_cap(channel->caps, *p)) + break; + if (request_dma(channel->chan, dev_id) == 0) + return channel->chan; + } + } + + return -EINVAL; +} +EXPORT_SYMBOL(request_dma_bycap); + +int dmac_search_free_channel(const char *dev_id) +{ + struct dma_channel *channel = { 0 }; + struct dma_info *info = get_dma_info(0); + int i; + + for (i = 0; i < info->nr_channels; i++) { + channel = &info->channels[i]; + if (unlikely(!channel)) + return -ENODEV; + + if (atomic_read(&channel->busy) == 0) + break; + } - down(&channel->sem); + if (info->ops->request) { + int result = info->ops->request(channel); + if (result) + return result; - if (!info->ops || chan >= MAX_DMA_CHANNELS) { - up(&channel->sem); - return -EINVAL; + atomic_set(&channel->busy, 1); + return channel->chan; } - atomic_set(&channel->busy, 1); + return -ENOSYS; +} + +int request_dma(unsigned int chan, const char *dev_id) +{ + struct dma_channel *channel = { 0 }; + struct dma_info *info = get_dma_info(chan); + int result; + + channel = get_dma_channel(chan); + if (atomic_xchg(&channel->busy, 1)) + return -EBUSY; strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id)); - up(&channel->sem); + if (info->ops->request) { + result = info->ops->request(channel); + if (result) + atomic_set(&channel->busy, 0); - if (info->ops->request) - return info->ops->request(channel); + return result; + } return 0; } +EXPORT_SYMBOL(request_dma); void free_dma(unsigned int chan) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (info->ops->free) info->ops->free(channel); atomic_set(&channel->busy, 0); } +EXPORT_SYMBOL(free_dma); void dma_wait_for_completion(unsigned int chan) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (channel->flags & DMA_TEI_CAPABLE) { wait_event(channel->wait_queue, @@ -158,21 +238,52 @@ void dma_wait_for_completion(unsigned int chan) while (info->ops->get_residue(channel)) cpu_relax(); } +EXPORT_SYMBOL(dma_wait_for_completion); + +int register_chan_caps(const char *dmac, struct dma_chan_caps *caps) +{ + struct dma_info *info; + unsigned int found = 0; + int i; + + list_for_each_entry(info, ®istered_dmac_list, list) + if (strcmp(dmac, info->name) == 0) { + found = 1; + break; + } + + if (unlikely(!found)) + return -ENODEV; + + for (i = 0; i < info->nr_channels; i++, caps++) { + struct dma_channel *channel; + + if ((info->first_channel_nr + i) != caps->ch_num) + return -EINVAL; + + channel = &info->channels[i]; + channel->caps = caps->caplist; + } + + return 0; +} +EXPORT_SYMBOL(register_chan_caps); void dma_configure_channel(unsigned int chan, unsigned long flags) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (info->ops->configure) info->ops->configure(channel, flags); } +EXPORT_SYMBOL(dma_configure_channel); int dma_xfer(unsigned int chan, unsigned long from, unsigned long to, size_t size, unsigned int mode) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); channel->sar = from; channel->dar = to; @@ -181,8 +292,20 @@ int dma_xfer(unsigned int chan, unsigned long from, return info->ops->xfer(channel); } +EXPORT_SYMBOL(dma_xfer); + +int dma_extend(unsigned int chan, unsigned long op, void *param) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = get_dma_channel(chan); + + if (info->ops->extend) + return info->ops->extend(channel, op, param); + + return -ENOSYS; +} +EXPORT_SYMBOL(dma_extend); -#ifdef CONFIG_PROC_FS static int dma_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) { @@ -214,8 +337,6 @@ static int dma_read_proc(char *buf, char **start, off_t off, return p - buf; } -#endif - int register_dmac(struct dma_info *info) { @@ -224,8 +345,7 @@ int register_dmac(struct dma_info *info) INIT_LIST_HEAD(&info->list); printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n", - info->name, info->nr_channels, - info->nr_channels > 1 ? "s" : ""); + info->name, info->nr_channels, info->nr_channels > 1 ? "s" : ""); BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels); @@ -242,28 +362,26 @@ int register_dmac(struct dma_info *info) size = sizeof(struct dma_channel) * info->nr_channels; - info->channels = kmalloc(size, GFP_KERNEL); + info->channels = kzalloc(size, GFP_KERNEL); if (!info->channels) return -ENOMEM; - - memset(info->channels, 0, size); } total_channels = get_nr_channels(); for (i = 0; i < info->nr_channels; i++) { - struct dma_channel *chan = info->channels + i; + struct dma_channel *chan = &info->channels[i]; + + atomic_set(&chan->busy, 0); - chan->chan = i; - chan->vchan = i + total_channels; + chan->chan = info->first_channel_nr + i; + chan->vchan = info->first_channel_nr + i + total_channels; memcpy(chan->dev_id, "Unused", 7); if (info->flags & DMAC_CHANNELS_TEI_CAPABLE) chan->flags |= DMA_TEI_CAPABLE; - init_MUTEX(&chan->sem); init_waitqueue_head(&chan->wait_queue); - dma_create_sysfs_files(chan, info); } @@ -271,6 +389,7 @@ int register_dmac(struct dma_info *info) return 0; } +EXPORT_SYMBOL(register_dmac); void unregister_dmac(struct dma_info *info) { @@ -285,31 +404,16 @@ void unregister_dmac(struct dma_info *info) list_del(&info->list); platform_device_unregister(info->pdev); } +EXPORT_SYMBOL(unregister_dmac); static int __init dma_api_init(void) { - printk("DMA: Registering DMA API.\n"); - -#ifdef CONFIG_PROC_FS + printk(KERN_NOTICE "DMA: Registering DMA API.\n"); create_proc_read_entry("dma", 0, 0, dma_read_proc, 0); -#endif - return 0; } - subsys_initcall(dma_api_init); MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); MODULE_DESCRIPTION("DMA API for SuperH"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(request_dma); -EXPORT_SYMBOL(free_dma); -EXPORT_SYMBOL(register_dmac); -EXPORT_SYMBOL(get_dma_residue); -EXPORT_SYMBOL(get_dma_info); -EXPORT_SYMBOL(get_dma_channel); -EXPORT_SYMBOL(dma_xfer); -EXPORT_SYMBOL(dma_wait_for_completion); -EXPORT_SYMBOL(dma_configure_channel); - diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 660786013350..f63721ed86c2 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -94,20 +94,13 @@ static int sh_dmac_request_dma(struct dma_channel *chan) if (unlikely(!chan->flags & DMA_TEI_CAPABLE)) return 0; - chan->name = kzalloc(32, GFP_KERNEL); - if (unlikely(chan->name == NULL)) - return -ENOMEM; - snprintf(chan->name, 32, "DMAC Transfer End (Channel %d)", - chan->chan); - return request_irq(get_dmte_irq(chan->chan), dma_tei, - IRQF_DISABLED, chan->name, chan); + IRQF_DISABLED, chan->dev_id, chan); } static void sh_dmac_free_dma(struct dma_channel *chan) { free_irq(get_dmte_irq(chan->chan), chan); - kfree(chan->name); } static void diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index 29b8ef9873d1..eebcd4768bbf 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -3,7 +3,7 @@ * * sysfs interface for SH DMA API * - * Copyright (C) 2004, 2005 Paul Mundt + * Copyright (C) 2004 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -21,7 +21,6 @@ static struct sysdev_class dma_sysclass = { set_kset_name("dma"), }; - EXPORT_SYMBOL(dma_sysclass); static ssize_t dma_show_devices(struct sys_device *dev, char *buf) @@ -31,7 +30,10 @@ static ssize_t dma_show_devices(struct sys_device *dev, char *buf) for (i = 0; i < MAX_DMA_CHANNELS; i++) { struct dma_info *info = get_dma_info(i); - struct dma_channel *channel = &info->channels[i]; + struct dma_channel *channel = get_dma_channel(i); + + if (unlikely(!info) || !channel) + continue; len += sprintf(buf + len, "%2d: %14s %s\n", channel->chan, info->name, @@ -125,11 +127,16 @@ int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info) if (ret) return ret; - sysdev_create_file(dev, &attr_dev_id); - sysdev_create_file(dev, &attr_count); - sysdev_create_file(dev, &attr_mode); - sysdev_create_file(dev, &attr_flags); - sysdev_create_file(dev, &attr_config); + ret |= sysdev_create_file(dev, &attr_dev_id); + ret |= sysdev_create_file(dev, &attr_count); + ret |= sysdev_create_file(dev, &attr_mode); + ret |= sysdev_create_file(dev, &attr_flags); + ret |= sysdev_create_file(dev, &attr_config); + + if (unlikely(ret)) { + dev_err(&info->pdev->dev, "Failed creating attrs\n"); + return ret; + } snprintf(name, sizeof(name), "dma%d", chan->chan); return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name); diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index cd56d53375e7..ac8ee2312cd8 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -15,25 +15,21 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/pci.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/titan.h> #include "pci-sh4.h" +static char titan_irq_tab[] __initdata = { + TITAN_IRQ_WAN, + TITAN_IRQ_LAN, + TITAN_IRQ_MPCIA, + TITAN_IRQ_MPCIB, + TITAN_IRQ_USB, +}; + int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - int irq = -1; - - switch (slot) { - case 0: irq = TITAN_IRQ_WAN; break; /* eth0 (WAN) */ - case 1: irq = TITAN_IRQ_LAN; break; /* eth1 (LAN) */ - case 2: irq = TITAN_IRQ_MPCIA; break; /* mPCI A */ - case 3: irq = TITAN_IRQ_MPCIB; break; /* mPCI B */ - case 4: irq = TITAN_IRQ_USB; break; /* USB */ - default: - printk(KERN_INFO "PCI: Bad IRQ mapping " - "request for slot %d\n", slot); - return -1; - } + int irq = titan_irq_tab[slot]; printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", slot, pin - 1 + 'A', irq); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index d6e635296534..602b644c35ad 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,6 +22,20 @@ #include <linux/delay.h> #include "pci-sh4.h" +#define INTC_BASE 0xffd00000 +#define INTC_ICR0 (INTC_BASE+0x0) +#define INTC_ICR1 (INTC_BASE+0x1c) +#define INTC_INTPRI (INTC_BASE+0x10) +#define INTC_INTREQ (INTC_BASE+0x24) +#define INTC_INTMSK0 (INTC_BASE+0x44) +#define INTC_INTMSK1 (INTC_BASE+0x48) +#define INTC_INTMSK2 (INTC_BASE+0x40080) +#define INTC_INTMSKCLR0 (INTC_BASE+0x64) +#define INTC_INTMSKCLR1 (INTC_BASE+0x68) +#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) +#define INTC_INT2MSKR (INTC_BASE+0x40038) +#define INTC_INT2MSKCR (INTC_BASE+0x4003c) + /* * Initialization. Try all known PCI access methods. Note that we support * using both PCI BIOS and direct access: in such cases, we use I/O ports diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c new file mode 100644 index 000000000000..f2b9157c314f --- /dev/null +++ b/arch/sh/drivers/push-switch.c @@ -0,0 +1,138 @@ +/* + * Generic push-switch framework + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/push-switch.h> + +#define DRV_NAME "push-switch" +#define DRV_VERSION "0.1.0" + +static ssize_t switch_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct push_switch_platform_info *psw_info = dev->platform_data; + return sprintf(buf, "%s\n", psw_info->name); +} +static DEVICE_ATTR(switch, S_IRUGO, switch_show, NULL); + +static void switch_timer(unsigned long data) +{ + struct push_switch *psw = (struct push_switch *)data; + + schedule_work(&psw->work); +} + +static void switch_work_handler(void *data) +{ + struct platform_device *pdev = data; + struct push_switch *psw = platform_get_drvdata(pdev); + + psw->state = 0; + + kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE); +} + +static int switch_drv_probe(struct platform_device *pdev) +{ + struct push_switch_platform_info *psw_info; + struct push_switch *psw; + int ret, irq; + + psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL); + if (unlikely(!psw)) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) { + ret = -ENODEV; + goto err; + } + + psw_info = pdev->dev.platform_data; + BUG_ON(!psw_info); + + ret = request_irq(irq, psw_info->irq_handler, + IRQF_DISABLED | psw_info->irq_flags, + psw_info->name ? psw_info->name : DRV_NAME, pdev); + if (unlikely(ret < 0)) + goto err; + + if (psw_info->name) { + ret = device_create_file(&pdev->dev, &dev_attr_switch); + if (unlikely(ret)) { + dev_err(&pdev->dev, "Failed creating device attrs\n"); + ret = -EINVAL; + goto err_irq; + } + } + + INIT_WORK(&psw->work, switch_work_handler, pdev); + init_timer(&psw->debounce); + + psw->debounce.function = switch_timer; + psw->debounce.data = (unsigned long)psw; + + platform_set_drvdata(pdev, psw); + + return 0; + +err_irq: + free_irq(irq, pdev); +err: + kfree(psw); + return ret; +} + +static int switch_drv_remove(struct platform_device *pdev) +{ + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + int irq = platform_get_irq(pdev, 0); + + if (psw_info->name) + device_remove_file(&pdev->dev, &dev_attr_switch); + + platform_set_drvdata(pdev, NULL); + flush_scheduled_work(); + del_timer_sync(&psw->debounce); + free_irq(irq, pdev); + + kfree(psw); + + return 0; +} + +static struct platform_driver switch_driver = { + .probe = switch_drv_probe, + .remove = switch_drv_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init switch_init(void) +{ + printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); + return platform_driver_register(&switch_driver); +} + +static void __exit switch_exit(void) +{ + platform_driver_unregister(&switch_driver); +} +module_init(switch_init); +module_exit(switch_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Paul Mundt"); +MODULE_LICENSE("GPLv2"); diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 5da88a43d350..99c7e5249f7a 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o signal.o entry.o traps.o irq.o \ +obj-y := process.o signal.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ io.o io_generic.o sh_ksyms.o syscalls.o @@ -21,3 +21,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index fb5dac069382..0582e6712b79 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -2,11 +2,12 @@ # Makefile for the Linux/SuperH CPU-specifc backends. # -obj-y += irq/ init.o clock.o - -obj-$(CONFIG_CPU_SH2) += sh2/ -obj-$(CONFIG_CPU_SH3) += sh3/ -obj-$(CONFIG_CPU_SH4) += sh4/ +obj-$(CONFIG_CPU_SH2) = sh2/ +obj-$(CONFIG_CPU_SH2A) = sh2a/ +obj-$(CONFIG_CPU_SH3) = sh3/ +obj-$(CONFIG_CPU_SH4) = sh4/ obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o + +obj-y += irq/ init.o clock.o diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 51ec64cdf348..abb586b12565 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -5,9 +5,11 @@ * * This clock framework is derived from the OMAP version by: * - * Copyright (C) 2004 Nokia Corporation + * Copyright (C) 2004 - 2005 Nokia Corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * + * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> + * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -20,6 +22,7 @@ #include <linux/kref.h> #include <linux/seq_file.h> #include <linux/err.h> +#include <linux/platform_device.h> #include <asm/clock.h> #include <asm/timer.h> @@ -195,17 +198,37 @@ void clk_recalc_rate(struct clk *clk) propagate_rate(clk); } -struct clk *clk_get(const char *id) +/* + * Returns a clock. Note that we first try to use device id on the bus + * and clock name. If this fails, we try to use clock name only. + */ +struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; mutex_lock(&clock_list_sem); list_for_each_entry(p, &clock_list, node) { + if (p->id == idno && + strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + + list_for_each_entry(p, &clock_list, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } + +found: mutex_unlock(&clock_list_sem); return clk; diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index bfb90eb0b7a6..48121766e8d2 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -68,12 +68,14 @@ static void __init cache_init(void) waysize = cpu_data->dcache.sets; +#ifdef CCR_CACHE_ORA /* * If the OC is already in RAM mode, we only have * half of the entries to flush.. */ if (ccr & CCR_CACHE_ORA) waysize >>= 1; +#endif waysize <<= cpu_data->dcache.entry_shift; diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 1c034c283f59..0049d217561a 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -1,8 +1,9 @@ # # Makefile for the Linux/SuperH CPU-specifc IRQ handlers. # -obj-y += ipr.o imask.o +obj-y += imask.o +obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c index a33ae3e0a5a5..301b505c4278 100644 --- a/arch/sh/kernel/cpu/irq/imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -53,7 +53,10 @@ void static inline set_interrupt_registers(int ip) { unsigned long __dummy; - asm volatile("ldc %2, r6_bank\n\t" + asm volatile( +#ifdef CONFIG_CPU_HAS_SR_RB + "ldc %2, r6_bank\n\t" +#endif "stc sr, %0\n\t" "and #0xf0, %0\n\t" "shlr2 %0\n\t" diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index 74ca576a7ce5..74defe76a058 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -11,22 +11,29 @@ * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. */ #include <linux/kernel.h> -#include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/io.h> -#include <asm/system.h> + +#if defined(CONFIG_CPU_SUBTYPE_SH7760) +#define INTC2_BASE 0xfe080000 +#define INTC2_INTMSK (INTC2_BASE + 0x40) +#define INTC2_INTMSKCLR (INTC2_BASE + 0x60) +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#define INTC2_BASE 0xffd40000 +#define INTC2_INTMSK (INTC2_BASE + 0x38) +#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c) +#endif static void disable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, - INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset); + ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset); } static void enable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, - INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset); + ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset); } static struct irq_chip intc2_irq_chip = { @@ -61,12 +68,10 @@ void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs) /* Set the priority level */ local_irq_save(flags); - ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + - p->ipr_offset); + ipr = ctrl_inl(INTC2_BASE + p->ipr_offset); ipr &= ~(0xf << p->ipr_shift); ipr |= p->priority << p->ipr_shift; - ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + - p->ipr_offset); + ctrl_outl(ipr, INTC2_BASE + p->ipr_offset); local_irq_restore(flags); diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index a0089563cbfc..35eb5751a3aa 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -19,25 +19,21 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/module.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/machvec.h> - +#include <linux/io.h> +#include <linux/interrupt.h> static void disable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); - int shift = p->shift*4; /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr); + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); } static void enable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); - int shift = p->shift*4; /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr); + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); } static struct irq_chip ipr_irq_chip = { @@ -53,6 +49,10 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) for (i = 0; i < nr_irqs; i++) { unsigned int irq = table[i].irq; + table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + /* could the IPR index be mapped, if not we ignore this */ + if (table[i].addr == 0) + continue; disable_irq_nosync(irq); set_irq_chip_and_handler_name(irq, &ipr_irq_chip, handle_level_irq, "level"); @@ -62,83 +62,6 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) } EXPORT_SYMBOL(make_ipr_irq); -static struct ipr_data sys_ipr_map[] = { -#ifndef CONFIG_CPU_SUBTYPE_SH7780 - { TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY }, - { TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY }, -#ifdef RTC_IRQ - { RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY }, -#endif -#ifdef SCI_ERI_IRQ - { SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, - { SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, - { SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, -#endif -#ifdef SCIF1_ERI_IRQ - { SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, - { SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, - { SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, - { SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) - { SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, -#endif -#ifdef SCIF_ERI_IRQ - { SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, - { SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, - { SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, - { SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, -#endif -#ifdef IRDA_ERI_IRQ - { IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, - { IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, - { IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, - { IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) - /* - * Initialize the Interrupt Controller (INTC) - * registers to their power on values - */ - - /* - * Enable external irq (INTC IRQ mode). - * You should set corresponding bits of PFC to "00" - * to enable these interrupts. - */ - { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY }, - { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY }, - { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY }, - { IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY }, - { IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY }, - { IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY }, -#endif -#endif -}; - -void __init init_IRQ(void) -{ - make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map)); - -#ifdef CONFIG_CPU_HAS_PINT_IRQ - init_IRQ_pint(); -#endif - -#ifdef CONFIG_CPU_HAS_INTC2_IRQ - init_IRQ_intc2(); -#endif - /* Perform the machine specific initialisation */ - if (sh_mv.mv_init_irq != NULL) - sh_mv.mv_init_irq(); - - irq_ctx_init(smp_processor_id()); -} - #if !defined(CONFIG_CPU_HAS_PINT_IRQ) int ipr_irq_demux(int irq) { diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile index 389353fba608..f0f059acfcfb 100644 --- a/arch/sh/kernel/cpu/sh2/Makefile +++ b/arch/sh/kernel/cpu/sh2/Makefile @@ -2,5 +2,6 @@ # Makefile for the Linux/SuperH SH-2 backends. # -obj-y := probe.o +obj-y := ex.o probe.o entry.o +obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c new file mode 100644 index 000000000000..d0440b269702 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c @@ -0,0 +1,81 @@ +/* + * arch/sh/kernel/cpu/sh2/clock-sh7619.c + * + * SH7619 support for the clock framework + * + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +const static int pll1rate[]={1,2}; +const static int pfc_divisors[]={1,2,0,4}; + +#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2) +#define PLL2 (4) +#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6) +#define PLL2 (2) +#else +#error "Illigal Clock Mode!" +#endif + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 7]; +} + +static struct clk_ops sh7619_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7619_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7]; +} + +static struct clk_ops sh7619_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk_ops sh7619_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7619_clk_ops[] = { + &sh7619_master_clk_ops, + &sh7619_module_clk_ops, + &sh7619_bus_clk_ops, + &sh7619_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7619_clk_ops)) + *ops = sh7619_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S new file mode 100644 index 000000000000..34d51b3745ea --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -0,0 +1,341 @@ +/* + * arch/sh/kernel/cpu/sh2/entry.S + * + * The SH-2 exception entry + * + * Copyright (C) 2005,2006 Yoshinori Sato + * Copyright (C) 2005 AXE,Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/cpu/mmu_context.h> +#include <asm/unistd.h> +#include <asm/errno.h> +#include <asm/page.h> + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+2*4) +OFF_TRA = (16*4+6*4) + +#include <asm/entry-macros.S> + +ENTRY(exception_handler) + ! already saved r0/r1 + mov.l r2,@-sp + mov.l r3,@-sp + mov r0,r1 + cli + mov.l $cpu_mode,r2 + mov.l @r2,r0 + mov.l @(5*4,r15),r3 ! previous SR + shll2 r3 ! set "S" flag + rotl r0 ! T <- "S" flag + rotl r0 ! "S" flag is LSB + rotcr r3 ! T -> r3:b30 + shlr r3 + shlr r0 + bt/s 1f + mov.l r3,@(5*4,r15) ! copy cpu mode to SR + ! switch to kernel mode + mov #1,r0 + rotr r0 + rotr r0 + mov.l r0,@r2 ! enter kernel mode + mov.l $current_thread_info,r2 + mov.l @r2,r2 + mov #0x20,r0 + shll8 r0 + add r2,r0 + mov r15,r2 ! r2 = user stack top + mov r0,r15 ! switch kernel stack + add #-4,r15 ! dummy + mov.l r1,@-r15 ! TRA + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + mov.l @(4*4,r2),r0 + mov.l @(5*4,r2),r1 + mov.l r1,@-r15 ! original SR + sts.l pr,@-r15 + mov.l r0,@-r15 ! original PC + mov r2,r3 + add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame + mov.l r3,@-r15 ! original SP + mov.l r14,@-r15 + mov.l r13,@-r15 + mov.l r12,@-r15 + mov.l r11,@-r15 + mov.l r10,@-r15 + mov.l r9,@-r15 + mov.l r8,@-r15 + mov.l r7,@-r15 + mov.l r6,@-r15 + mov.l r5,@-r15 + mov.l r4,@-r15 + mov r2,r8 ! copy user -> kernel stack + mov.l @r8+,r3 + mov.l r3,@-r15 + mov.l @r8+,r2 + mov.l r2,@-r15 + mov.l @r8+,r1 + mov.l r1,@-r15 + mov.l @r8+,r0 + bra 2f + mov.l r0,@-r15 +1: + ! in kernel exception + mov #(22-4-4-1)*4+4,r0 + mov r15,r2 + sub r0,r15 + mov.l @r2+,r0 ! old R3 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R2 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R1 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R0 + mov.l r0,@-r15 + mov.l @r2+,r3 ! old PC + mov.l @r2+,r0 ! old SR + add #-4,r2 ! exception frame stub (sr) + mov.l r1,@-r2 ! TRA + sts.l macl, @-r2 + sts.l mach, @-r2 + stc.l gbr, @-r2 + mov.l r0,@-r2 ! save old SR + sts.l pr,@-r2 + mov.l r3,@-r2 ! save old PC + mov r2,r0 + add #8*4,r0 + mov.l r0,@-r2 ! save old SP + mov.l r14,@-r2 + mov.l r13,@-r2 + mov.l r12,@-r2 + mov.l r11,@-r2 + mov.l r10,@-r2 + mov.l r9,@-r2 + mov.l r8,@-r2 + mov.l r7,@-r2 + mov.l r6,@-r2 + mov.l r5,@-r2 + mov.l r4,@-r2 + mov.l @(OFF_R0,r15),r0 + mov.l @(OFF_R1,r15),r1 + mov.l @(OFF_R2,r15),r2 + mov.l @(OFF_R3,r15),r3 +2: + mov #OFF_TRA,r8 + add r15,r8 + mov.l @r8,r9 + mov #64,r8 + cmp/hs r8,r9 + bt interrupt_entry ! vec >= 64 is interrupt + mov #32,r8 + cmp/hs r8,r9 + bt trap_entry ! 64 > vec >= 32 is trap + mov.l 4f,r8 + mov r9,r4 + shll2 r9 + add r9,r8 + mov.l @r8,r8 + mov #0,r9 + cmp/eq r9,r8 + bf 3f + mov.l 8f,r8 ! unhandled exception +3: + mov.l 5f,r10 + jmp @r8 + lds r10,pr + +interrupt_entry: + mov r9,r4 + mov.l 6f,r9 + mov.l 7f,r8 + jmp @r8 + lds r9,pr + + .align 2 +4: .long exception_handling_table +5: .long ret_from_exception +6: .long ret_from_irq +7: .long do_IRQ +8: .long do_exception_error + +trap_entry: + add #-0x10,r9 + shll2 r9 ! TRA + mov #OFF_TRA,r8 + add r15,r8 + mov.l r9,@r8 + mov r9,r8 +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r9 + jsr @r9 + nop +#endif + sti + bra system_call + nop + + .align 2 +1: .long syscall_exit +2: .long break_point_trap_software +3: .long NR_syscalls +4: .long sys_call_table +#ifdef CONFIG_TRACE_IRQFLAGS +5: .long trace_hardirqs_on +#endif + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +debug_kernel_fw: + mov r15,r0 + add #(22-4)*4-4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l @(OFF_SP,r0),r1 + mov #OFF_SR,r2 + mov.l @(r0,r2),r3 + mov.l r3,@-r1 + mov #OFF_SP,r2 + mov.l @(r0,r2),r3 + mov.l r3,@-r1 + mov r15,r0 + add #(22-4)*4-8,r0 + mov.l 1f,r2 + mov.l @r2,r2 + stc sr,r3 + mov.l r2,@r0 + mov.l r3,@r0 + mov.l r1,@(8,r0) + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + add #8,r15 + lds.l @r15+, pr + rte + mov.l @r15+,r15 + .align 2 +1: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +ENTRY(address_error_handler) + mov r15,r4 ! regs + add #4,r4 + mov #OFF_PC,r0 + mov.l @(r0,r15),r6 ! pc + mov.l 1f,r0 + jmp @r0 + mov #0,r5 ! writeaccess is unknown + .align 2 + +1: .long do_address_error + +restore_all: + cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 3f, r0 + jsr @r0 + nop +#endif + mov r15,r0 + mov.l $cpu_mode,r2 + mov #OFF_SR,r3 + mov.l @(r0,r3),r1 + mov.l r1,@r2 + shll2 r1 ! clear MD bit + shlr2 r1 + mov.l @(OFF_SP,r0),r2 + add #-8,r2 + mov.l r2,@(OFF_SP,r0) ! point exception frame top + mov.l r1,@(4,r2) ! set sr + mov #OFF_PC,r3 + mov.l @(r0,r3),r1 + mov.l r1,@r2 ! set pc + add #4*16+4,r0 + lds.l @r0+,pr + add #4,r0 ! skip sr + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + get_current_thread_info r0, r1 + mov.l $current_thread_info,r1 + mov.l r0,@r1 + mov.l @r15+,r0 + mov.l @r15+,r1 + mov.l @r15+,r2 + mov.l @r15+,r3 + mov.l @r15+,r4 + mov.l @r15+,r5 + mov.l @r15+,r6 + mov.l @r15+,r7 + mov.l @r15+,r8 + mov.l @r15+,r9 + mov.l @r15+,r10 + mov.l @r15+,r11 + mov.l @r15+,r12 + mov.l @r15+,r13 + mov.l @r15+,r14 + mov.l @r15,r15 + rte + nop +2: + mov.l 1f,r8 + mov.l 2f,r9 + jmp @r9 + lds r8,pr + + .align 2 +$current_thread_info: + .long __current_thread_info +$cpu_mode: + .long __cpu_mode +#ifdef CONFIG_TRACE_IRQFLAGS +3: .long trace_hardirqs_off +#endif + +! common exception handler +#include "../../entry-common.S" + + .data +! cpu operation mode +! bit30 = MD (compatible SH3/4) +__cpu_mode: + .long 0x40000000 + + .section .bss +__current_thread_info: + .long 0 + +ENTRY(exception_handling_table) + .space 4*32 diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S new file mode 100644 index 000000000000..6d285af7846c --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/ex.S @@ -0,0 +1,46 @@ +/* + * arch/sh/kernel/cpu/sh2/ex.S + * + * The SH-2 exception vector table + * + * Copyright (C) 2005 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/linkage.h> + +! +! convert Exception Vector to Exception Number +! +exception_entry: +no = 0 + .rept 256 + mov.l r0,@-sp + mov #no,r0 + bra exception_trampoline + and #0xff,r0 +no = no + 1 + .endr +exception_trampoline: + mov.l r1,@-sp + mov.l $exception_handler,r1 + jmp @r1 + + .align 2 +$exception_entry: + .long exception_entry +$exception_handler: + .long exception_handler +! +! Exception Vector Base +! + .align 2 +ENTRY(vbr_base) +vector = 0 + .rept 256 + .long exception_entry + vector * 8 +vector = vector + 1 + .endr diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index f17a2a0d588e..ba527d9b5024 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -17,17 +17,23 @@ int __init detect_cpu_and_cache_system(void) { - /* - * For now, assume SH7604 .. fix this later. - */ +#if defined(CONFIG_CPU_SUBTYPE_SH7604) cpu_data->type = CPU_SH7604; cpu_data->dcache.ways = 4; - cpu_data->dcache.way_shift = 6; + cpu_data->dcache.way_incr = (1<<10); cpu_data->dcache.sets = 64; cpu_data->dcache.entry_shift = 4; cpu_data->dcache.linesz = L1_CACHE_BYTES; cpu_data->dcache.flags = 0; - +#elif defined(CONFIG_CPU_SUBTYPE_SH7619) + cpu_data->type = CPU_SH7619; + cpu_data->dcache.ways = 4; + cpu_data->dcache.way_incr = (1<<12); + cpu_data->dcache.sets = 256; + cpu_data->dcache.entry_shift = 4; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + cpu_data->dcache.flags = 0; +#endif /* * SH-2 doesn't have separate caches */ diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c new file mode 100644 index 000000000000..82c2d905152f --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -0,0 +1,53 @@ +/* + * SH7619 Setup + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xf8400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 88, 89, 91, 90}, + }, { + .mapbase = 0xf8410000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 92, 93, 95, 94}, + }, { + .mapbase = 0xf8420000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 96, 97, 99, 98}, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7619_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7619_devices_setup(void) +{ + return platform_add_devices(sh7619_devices, + ARRAY_SIZE(sh7619_devices)); +} +__initcall(sh7619_devices_setup); diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile new file mode 100644 index 000000000000..350972ae9410 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the Linux/SuperH SH-2A backends. +# + +obj-y := common.o probe.o + +common-y += $(addprefix ../sh2/, ex.o) +common-y += $(addprefix ../sh2/, entry.o) + +obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c new file mode 100644 index 000000000000..a9ad309c6a33 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c @@ -0,0 +1,85 @@ +/* + * arch/sh/kernel/cpu/sh2a/clock-sh7206.c + * + * SH7206 support for the clock framework + * + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +const static int pll1rate[]={1,2,3,4,6,8}; +const static int pfc_divisors[]={1,2,3,4,6,8,12}; +#define ifc_divisors pfc_divisors + +#if (CONFIG_SH_CLK_MD == 2) +#define PLL2 (4) +#elif (CONFIG_SH_CLK_MD == 6) +#define PLL2 (2) +#elif (CONFIG_SH_CLK_MD == 7) +#define PLL2 (1) +#else +#error "Illigal Clock Mode!" +#endif + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007]; +} + +static struct clk_ops sh7206_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7206_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007]; +} + +static struct clk_ops sh7206_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7206_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7206_clk_ops[] = { + &sh7206_master_clk_ops, + &sh7206_module_clk_ops, + &sh7206_bus_clk_ops, + &sh7206_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7206_clk_ops)) + *ops = sh7206_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c new file mode 100644 index 000000000000..87c6c0542089 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -0,0 +1,39 @@ +/* + * arch/sh/kernel/cpu/sh2a/probe.c + * + * CPU Subtype Probing for SH-2A. + * + * Copyright (C) 2004, 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <asm/processor.h> +#include <asm/cache.h> + +int __init detect_cpu_and_cache_system(void) +{ + /* Just SH7206 for now .. */ + cpu_data->type = CPU_SH7206; + + cpu_data->dcache.ways = 4; + cpu_data->dcache.way_incr = (1 << 11); + cpu_data->dcache.sets = 128; + cpu_data->dcache.entry_shift = 4; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + cpu_data->dcache.flags = 0; + + /* + * The icache is the same as the dcache as far as this setup is + * concerned. The only real difference in hardware is that the icache + * lacks the U bit that the dcache has, none of this has any bearing + * on the cache info. + */ + cpu_data->icache = cpu_data->dcache; + + return 0; +} + diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c new file mode 100644 index 000000000000..cdfeef49e62e --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -0,0 +1,58 @@ +/* + * SH7206 Setup + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 240, 241, 242, 243}, + }, { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 244, 245, 246, 247}, + }, { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 248, 249, 250, 251}, + }, { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 252, 253, 254, 255}, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7206_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7206_devices_setup(void) +{ + return platform_add_devices(sh7206_devices, + ARRAY_SIZE(sh7206_devices)); +} +__initcall(sh7206_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 58d3815695ff..83905e4e4387 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -2,7 +2,7 @@ # Makefile for the Linux/SuperH SH-3 backends. # -obj-y := ex.o probe.o +obj-y := ex.o probe.o entry.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c index 10461a745e5f..b791a29fdb62 100644 --- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c @@ -24,7 +24,7 @@ static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 }; static void set_bus_parent(struct clk *clk) { - struct clk *bus_clk = clk_get("bus_clk"); + struct clk *bus_clk = clk_get(NULL, "bus_clk"); clk->parent = bus_clk; clk_put(bus_clk); } diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 39aaefb2d83f..8c0dc2700c69 100644 --- a/arch/sh/kernel/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -1,5 +1,5 @@ /* - * linux/arch/sh/entry.S + * arch/sh/kernel/entry.S * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2003 - 2006 Paul Mundt @@ -7,15 +7,16 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ #include <linux/sys.h> #include <linux/errno.h> #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> #include <asm/unistd.h> +#include <asm/cpu/mmu_context.h> +#include <asm/pgtable.h> +#include <asm/page.h> ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -81,6 +82,8 @@ OFF_TRA = (16*4+6*4) #define k_g_imask r6_bank /* r6_bank1 */ #define current r7 /* r7_bank1 */ +#include <asm/entry-macros.S> + /* * Kernel mode register usage: * k0 scratch @@ -107,26 +110,6 @@ OFF_TRA = (16*4+6*4) ! this first version depends *much* on C implementation. ! -#define CLI() \ - stc sr, r0; \ - or #0xf0, r0; \ - ldc r0, sr - -#define STI() \ - mov.l __INV_IMASK, r11; \ - stc sr, r10; \ - and r11, r10; \ - stc k_g_imask, r11; \ - or r11, r10; \ - ldc r10, sr - -#if defined(CONFIG_PREEMPT) -# define preempt_stop() CLI() -#else -# define preempt_stop() -# define resume_kernel restore_all -#endif - #if defined(CONFIG_MMU) .align 2 ENTRY(tlb_miss_load) @@ -155,29 +138,14 @@ ENTRY(tlb_protection_violation_store) call_dpf: mov.l 1f, r0 - mov r5, r8 - mov.l @r0, r6 - mov r6, r9 - mov.l 2f, r0 - sts pr, r10 - jsr @r0 - mov r15, r4 - ! - tst r0, r0 - bf/s 0f - lds r10, pr - rts - nop -0: STI() + mov.l @r0, r6 ! address mov.l 3f, r0 - mov r9, r6 - mov r8, r5 + jmp @r0 - mov r15, r4 + mov r15, r4 ! regs .align 2 1: .long MMU_TEA -2: .long __do_page_fault 3: .long do_page_fault .align 2 @@ -203,32 +171,6 @@ call_dae: 2: .long do_address_error #endif /* CONFIG_MMU */ -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) -! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. -! If both are configured, handle the debug traps (breakpoints) in SW, -! but still allow BIOS traps to FW. - - .align 2 -debug_kernel: -#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) - /* Force BIOS call to FW (debug_trap put TRA in r8) */ - mov r8,r0 - shlr2 r0 - cmp/eq #0x3f,r0 - bt debug_kernel_fw -#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ - -debug_enter: -#if defined(CONFIG_SH_KGDB) - /* Jump to kgdb, pass stacked regs as arg */ -debug_kernel_sw: - mov.l 3f, r0 - jmp @r0 - mov r15, r4 - .align 2 -3: .long kgdb_handle_exception -#endif /* CONFIG_SH_KGDB */ - #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ debug_kernel_fw: @@ -269,276 +211,6 @@ debug_kernel_fw: 2: .long gdb_vbr_vector #endif /* CONFIG_SH_STANDARD_BIOS */ -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - - - .align 2 -debug_trap: -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s debug_kernel -#endif - mov.l @r15, r0 ! Restore R0 value - mov.l 1f, r8 - jmp @r8 - nop - - .align 2 -ENTRY(exception_error) - ! - STI() - mov.l 2f, r0 - jmp @r0 - nop - -! - .align 2 -1: .long break_point_trap_software -2: .long do_exception_error - - .align 2 -ret_from_exception: - preempt_stop() -ENTRY(ret_from_irq) - ! - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s resume_kernel ! Yes, it's from kernel, go back soon - GET_THREAD_INFO(r8) - -#ifdef CONFIG_PREEMPT - bra resume_userspace - nop -ENTRY(resume_kernel) - mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count - tst r0, r0 - bf noresched -need_resched: - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_NEED_RESCHED, r0 ! need_resched set? - bt noresched - - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - and #0xf0, r0 ! interrupts off (exception path)? - cmp/eq #0xf0, r0 - bt noresched - - mov.l 1f, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - - STI() - mov.l 2f, r0 - jsr @r0 - nop - mov #0, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - CLI() - - bra need_resched - nop -noresched: - bra restore_all - nop - - .align 2 -1: .long PREEMPT_ACTIVE -2: .long schedule -#endif - -ENTRY(resume_userspace) - ! r8: current_thread_info - CLI() - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 - bt/s restore_all - tst #_TIF_NEED_RESCHED, r0 - - .align 2 -work_pending: - ! r0: current_thread_info->flags - ! r8: current_thread_info - ! t: result of "tst #_TIF_NEED_RESCHED, r0" - bf/s work_resched - tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0 -work_notifysig: - bt/s restore_all - mov r15, r4 - mov r12, r5 ! set arg1(save_r0) - mov r0, r6 - mov.l 2f, r1 - mova restore_all, r0 - jmp @r1 - lds r0, pr -work_resched: -#ifndef CONFIG_PREEMPT - ! gUSA handling - mov.l @(OFF_SP,r15), r0 ! get user space stack pointer - mov r0, r1 - shll r0 - bf/s 1f - shll r0 - bf/s 1f - mov #OFF_PC, r0 - ! SP >= 0xc0000000 : gUSA mark - mov.l @(r0,r15), r2 ! get user space PC (program counter) - mov.l @(OFF_R0,r15), r3 ! end point - cmp/hs r3, r2 ! r2 >= r3? - bt 1f - add r3, r1 ! rewind point #2 - mov.l r1, @(r0,r15) ! reset PC to rewind point #2 - ! -1: -#endif - mov.l 1f, r1 - jsr @r1 ! schedule - nop - CLI() - ! - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 - bt restore_all - bra work_pending - tst #_TIF_NEED_RESCHED, r0 - - .align 2 -1: .long schedule -2: .long do_notify_resume - - .align 2 -syscall_exit_work: - ! r0: current_thread_info->flags - ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE, r0 - bt/s work_pending - tst #_TIF_NEED_RESCHED, r0 - STI() - ! XXX setup arguments... - mov.l 4f, r0 ! do_syscall_trace - jsr @r0 - nop - bra resume_userspace - nop - - .align 2 -syscall_trace_entry: - ! Yes it is traced. - ! XXX setup arguments... - mov.l 4f, r11 ! Call do_syscall_trace which notifies - jsr @r11 ! superior (will chomp R[0-7]) - nop - ! Reload R0-R4 from kernel stack, where the - ! parent may have modified them using - ! ptrace(POKEUSR). (Note that R0-R2 are - ! used by the system call handler directly - ! from the kernel stack anyway, so don't need - ! to be reloaded here.) This allows the parent - ! to rewrite system calls and args on the fly. - mov.l @(OFF_R4,r15), r4 ! arg0 - mov.l @(OFF_R5,r15), r5 - mov.l @(OFF_R6,r15), r6 - mov.l @(OFF_R7,r15), r7 ! arg3 - mov.l @(OFF_R3,r15), r3 ! syscall_nr - ! Arrange for do_syscall_trace to be called - ! again as the system call returns. - mov.l 2f, r10 ! Number of syscalls - cmp/hs r10, r3 - bf syscall_call - mov #-ENOSYS, r0 - bra syscall_exit - mov.l r0, @(OFF_R0,r15) ! Return value - -/* - * Syscall interface: - * - * Syscall #: R3 - * Arguments #0 to #3: R4--R7 - * Arguments #4 to #6: R0, R1, R2 - * TRA: (number of arguments + 0x10) x 4 - * - * This code also handles delegating other traps to the BIOS/gdb stub - * according to: - * - * Trap number - * (TRA>>2) Purpose - * -------- ------- - * 0x0-0xf old syscall ABI - * 0x10-0x1f new syscall ABI - * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. - * - * Note: When we're first called, the TRA value must be shifted - * right 2 bits in order to get the value that was used as the "trapa" - * argument. - */ - - .align 2 - .globl ret_from_fork -ret_from_fork: - mov.l 1f, r8 - jsr @r8 - mov r0, r4 - bra syscall_exit - nop - .align 2 -1: .long schedule_tail - ! -ENTRY(system_call) - mov.l 1f, r9 - mov.l @r9, r8 ! Read from TRA (Trap Address) Register - ! - ! Is the trap argument >= 0x20? (TRA will be >= 0x80) - mov #0x7f, r9 - cmp/hi r9, r8 - bt/s 0f - mov #OFF_TRA, r9 - add r15, r9 - ! - mov.l r8, @r9 ! set TRA value to tra - STI() - ! Call the system call handler through the table. - ! First check for bad syscall number - mov r3, r9 - mov.l 2f, r8 ! Number of syscalls - cmp/hs r8, r9 - bf/s good_system_call - GET_THREAD_INFO(r8) -syscall_badsys: ! Bad syscall number - mov #-ENOSYS, r0 - bra resume_userspace - mov.l r0, @(OFF_R0,r15) ! Return value - ! -0: - bra debug_trap - nop - ! -good_system_call: ! Good syscall number - mov.l @(TI_FLAGS,r8), r8 - mov #_TIF_SYSCALL_TRACE, r10 - tst r10, r8 - bf syscall_trace_entry - ! -syscall_call: - shll2 r9 ! x4 - mov.l 3f, r8 ! Load the address of sys_call_table - add r8, r9 - mov.l @r9, r8 - jsr @r8 ! jump to specific syscall handler - nop - mov.l @(OFF_R0,r15), r12 ! save r0 - mov.l r0, @(OFF_R0,r15) ! save the return value - ! -syscall_exit: - CLI() - ! - GET_THREAD_INFO(r8) - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_ALLWORK_MASK, r0 - bf syscall_exit_work restore_all: mov.l @r15+, r0 mov.l @r15+, r1 @@ -606,7 +278,9 @@ skip_restore: ! ! Calculate new SR value mov k3, k2 ! original SR value - mov.l 9f, k1 + mov #0xf0, k1 + extu.b k1, k1 + not k1, k1 and k1, k2 ! Mask orignal SR value ! mov k3, k0 ! Calculate IMASK-bits @@ -632,16 +306,12 @@ skip_restore: nop .align 2 -1: .long TRA -2: .long NR_syscalls -3: .long sys_call_table -4: .long do_syscall_trace 5: .long 0x00001000 ! DSP 7: .long 0x30000000 -9: -__INV_IMASK: - .long 0xffffff0f ! ~(IMASK) +! common exception handler +#include "../../entry-common.S" + ! Exception Vector Base ! ! Should be aligned page boundary. @@ -661,9 +331,176 @@ general_exception: 2: .long ret_from_exception ! ! + +/* This code makes some assumptions to improve performance. + * Make sure they are stil true. */ +#if PTRS_PER_PGD != PTRS_PER_PTE +#error PGD and PTE sizes don't match +#endif + +/* gas doesn't flag impossible values for mov #immediate as an error */ +#if (_PAGE_PRESENT >> 2) > 0x7f +#error cannot load PAGE_PRESENT as an immediate +#endif +#if _PAGE_DIRTY > 0x7f +#error cannot load PAGE_DIRTY as an immediate +#endif +#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED +#error cannot derive PAGE_ACCESSED from PAGE_PRESENT +#endif + +#if defined(CONFIG_CPU_SH4) +#define ldmmupteh(r) mov.l 8f, r +#else +#define ldmmupteh(r) mov #MMU_PTEH, r +#endif + .balign 1024,0,1024 tlb_miss: - mov.l 1f, k2 +#ifdef COUNT_EXCEPTIONS + ! Increment the counts + mov.l 9f, k1 + mov.l @k1, k2 + add #1, k2 + mov.l k2, @k1 +#endif + + ! k0 scratch + ! k1 pgd and pte pointers + ! k2 faulting address + ! k3 pgd and pte index masks + ! k4 shift + + ! Load up the pgd entry (k1) + + ldmmupteh(k0) ! 9 LS (latency=2) MMU_PTEH + + mov.w 4f, k3 ! 8 LS (latency=2) (PTRS_PER_PGD-1) << 2 + mov #-(PGDIR_SHIFT-2), k4 ! 6 EX + + mov.l @(MMU_TEA-MMU_PTEH,k0), k2 ! 18 LS (latency=2) + + mov.l @(MMU_TTB-MMU_PTEH,k0), k1 ! 18 LS (latency=2) + + mov k2, k0 ! 5 MT (latency=0) + shld k4, k0 ! 99 EX + + and k3, k0 ! 78 EX + + mov.l @(k0, k1), k1 ! 21 LS (latency=2) + mov #-(PAGE_SHIFT-2), k4 ! 6 EX + + ! Load up the pte entry (k2) + + mov k2, k0 ! 5 MT (latency=0) + shld k4, k0 ! 99 EX + + tst k1, k1 ! 86 MT + + bt 20f ! 110 BR + + and k3, k0 ! 78 EX + mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT + + mov.l @(k0, k1), k2 ! 21 LS (latency=2) + add k0, k1 ! 49 EX + +#ifdef CONFIG_CPU_HAS_PTEA + ! Test the entry for present and _PAGE_ACCESSED + + mov #-28, k3 ! 6 EX + mov k2, k0 ! 5 MT (latency=0) + + tst k4, k2 ! 68 MT + shld k3, k0 ! 99 EX + + bt 20f ! 110 BR + + ! Set PTEA register + ! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1) + ! + ! k0=pte>>28, k1=pte*, k2=pte, k3=<unused>, k4=_PAGE_PRESENT + + and #0xe, k0 ! 79 EX + + mov k0, k3 ! 5 MT (latency=0) + mov k2, k0 ! 5 MT (latency=0) + + and #1, k0 ! 79 EX + + or k0, k3 ! 82 EX + + ldmmupteh(k0) ! 9 LS (latency=2) + shll2 k4 ! 101 EX _PAGE_ACCESSED + + tst k4, k2 ! 68 MT + + mov.l k3, @(MMU_PTEA-MMU_PTEH,k0) ! 27 LS + + mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK + + ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED +#else + + ! Test the entry for present and _PAGE_ACCESSED + + mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK + tst k4, k2 ! 68 MT + + shll2 k4 ! 101 EX _PAGE_ACCESSED + ldmmupteh(k0) ! 9 LS (latency=2) + + bt 20f ! 110 BR + tst k4, k2 ! 68 MT + + ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED + +#endif + + ! Set up the entry + + and k2, k3 ! 78 EX + bt/s 10f ! 108 BR + + mov.l k3, @(MMU_PTEL-MMU_PTEH,k0) ! 27 LS + + ldtlb ! 128 CO + + ! At least one instruction between ldtlb and rte + nop ! 119 NOP + + rte ! 126 CO + + nop ! 119 NOP + + +10: or k4, k2 ! 82 EX + + ldtlb ! 128 CO + + ! At least one instruction between ldtlb and rte + mov.l k2, @k1 ! 27 LS + + rte ! 126 CO + + ! Note we cannot execute mov here, because it is executed after + ! restoring SSR, so would be executed in user space. + nop ! 119 NOP + + + .align 5 + ! Once cache line if possible... +1: .long swapper_pg_dir +4: .short (PTRS_PER_PGD-1) << 2 +5: .short _PAGE_PRESENT +7: .long _PAGE_FLAGS_HARDWARE_MASK +8: .long MMU_PTEH +#ifdef COUNT_EXCEPTIONS +9: .long exception_count_miss +#endif + + ! Either pgd or pte not present +20: mov.l 1f, k2 mov.l 4f, k3 bra handle_exception mov.l @k2, k2 @@ -710,8 +547,9 @@ ENTRY(handle_exception) bt/s 1f ! It's a kernel to kernel transition. mov r15, k0 ! save original stack to k0 /* User space to kernel */ - mov #(THREAD_SIZE >> 8), k1 + mov #(THREAD_SIZE >> 10), k1 shll8 k1 ! k1 := THREAD_SIZE + shll2 k1 add current, k1 mov k1, r15 ! change to kernel stack ! @@ -761,7 +599,7 @@ skip_save: ! Save the user registers on the stack. mov.l k2, @-r15 ! EXPEVT - mov #-1, k4 + mov #-1, k4 mov.l k4, @-r15 ! set TRA (default: -1) ! sts.l macl, @-r15 @@ -813,6 +651,15 @@ skip_save: bf interrupt_exception shlr2 r8 shlr r8 + +#ifdef COUNT_EXCEPTIONS + mov.l 5f, r9 + add r8, r9 + mov.l @r9, r10 + add #1, r10 + mov.l r10, @r9 +#endif + mov.l 4f, r9 add r8, r9 mov.l @r9, r9 @@ -826,6 +673,9 @@ skip_save: 2: .long 0x000080f0 ! FD=1, IMASK=15 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table +#ifdef COUNT_EXCEPTIONS +5: .long exception_count_table +#endif interrupt_exception: mov.l 1f, r9 diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 8dbf3895ece7..6e415baf04b4 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -2,7 +2,8 @@ # Makefile for the Linux/SuperH SH-4 backends. # -obj-y := ex.o probe.o +obj-y := ex.o probe.o common.o +common-y += $(addprefix ../sh3/, entry.o) obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index bfdf5fe8d948..fa2019aabd74 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -97,7 +97,7 @@ static void shoc_clk_recalc(struct clk *clk) static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate) { - struct clk *bclk = clk_get("bus_clk"); + struct clk *bclk = clk_get(NULL, "bus_clk"); unsigned long bclk_rate = clk_get_rate(bclk); clk_put(bclk); @@ -151,7 +151,7 @@ static struct clk *sh4202_onchip_clocks[] = { static int __init sh4202_clk_init(void) { - struct clk *clk = clk_get("master_clk"); + struct clk *clk = clk_get(NULL, "master_clk"); int i; for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) { diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7780.c b/arch/sh/kernel/cpu/sh4/clock-sh7780.c index 93ad367342c9..9e6a216750c8 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh7780.c @@ -98,7 +98,7 @@ static struct clk *sh7780_onchip_clocks[] = { static int __init sh7780_clk_init(void) { - struct clk *clk = clk_get("master_clk"); + struct clk *clk = clk_get(NULL, "master_clk"); int i; for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) { diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index f486c07e10e2..7624677f6628 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -282,11 +282,8 @@ ieee_fpe_handler (struct pt_regs *regs) grab_fpu(regs); restore_fpu(tsk); set_tsk_thread_flag(tsk, TIF_USEDFPU); - } else { - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; + } else force_sig(SIGFPE, tsk); - } regs->pc = nextpc; return 1; @@ -296,29 +293,29 @@ ieee_fpe_handler (struct pt_regs *regs) } asmlinkage void -do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) +do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; - if (ieee_fpe_handler (®s)) + if (ieee_fpe_handler(regs)) return; - regs.pc += 2; - save_fpu(tsk, ®s); - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; + regs->pc += 2; + save_fpu(tsk, regs); force_sig(SIGFPE, tsk); } asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, struct pt_regs regs) + unsigned long r7, struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; - grab_fpu(®s); - if (!user_mode(®s)) { + grab_fpu(regs); + if (!user_mode(regs)) { printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); return; } diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index c294de1e14a3..afe0f1b1c030 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -79,16 +79,16 @@ int __init detect_cpu_and_cache_system(void) case 0x205: cpu_data->type = CPU_SH7750; cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | - CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA; + CPU_HAS_PERF_COUNTER; break; case 0x206: cpu_data->type = CPU_SH7750S; cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | - CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA; + CPU_HAS_PERF_COUNTER; break; case 0x1100: cpu_data->type = CPU_SH7751; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x2000: cpu_data->type = CPU_SH73180; @@ -126,23 +126,22 @@ int __init detect_cpu_and_cache_system(void) break; case 0x8000: cpu_data->type = CPU_ST40RA; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x8100: cpu_data->type = CPU_ST40GX1; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x700: cpu_data->type = CPU_SH4_501; cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_PTEA; break; case 0x600: cpu_data->type = CPU_SH4_202; cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x500 ... 0x501: switch (prr) { @@ -160,7 +159,7 @@ int __init detect_cpu_and_cache_system(void) cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; default: @@ -173,6 +172,10 @@ int __init detect_cpu_and_cache_system(void) cpu_data->dcache.ways = 1; #endif +#ifdef CONFIG_CPU_HAS_PTEA + cpu_data->flags |= CPU_HAS_PTEA; +#endif + /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 50812d57c1c1..bbcb06f18b04 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -2,6 +2,7 @@ * SH7750/SH7751 Setup * * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 Jamie Lenehan * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,6 +11,7 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/serial.h> +#include <linux/io.h> #include <asm/sci.h> static struct plat_sci_port sci_platform_data[] = { @@ -46,3 +48,71 @@ static int __init sh7750_devices_setup(void) ARRAY_SIZE(sh7750_devices)); } __initcall(sh7750_devices_setup); + +static struct ipr_data sh7750_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 12, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 19, 0, 4, 2 }, /* TMU2 TIPCI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ + { 21, 0, 0, 2 }, /* RTC PRI (period) */ + { 22, 0, 0, 2 }, /* RTC CUI (carry) */ + { 23, 1, 4, 3 }, /* SCI ERI */ + { 24, 1, 4, 3 }, /* SCI RXI */ + { 25, 1, 4, 3 }, /* SCI TXI */ + { 40, 2, 4, 3 }, /* SCIF ERI */ + { 41, 2, 4, 3 }, /* SCIF RXI */ + { 42, 2, 4, 3 }, /* SCIF BRI */ + { 43, 2, 4, 3 }, /* SCIF TXI */ + { 34, 2, 8, 7 }, /* DMAC DMTE0 */ + { 35, 2, 8, 7 }, /* DMAC DMTE1 */ + { 36, 2, 8, 7 }, /* DMAC DMTE2 */ + { 37, 2, 8, 7 }, /* DMAC DMTE3 */ + { 28, 2, 8, 7 }, /* DMAC DMAE */ +}; + +static struct ipr_data sh7751_ipr_map[] = { + { 44, 2, 8, 7 }, /* DMAC DMTE4 */ + { 45, 2, 8, 7 }, /* DMAC DMTE5 */ + { 46, 2, 8, 7 }, /* DMAC DMTE6 */ + { 47, 2, 8, 7 }, /* DMAC DMTE7 */ + /* The following use INTC_INPRI00 for masking, which is a 32-bit + register, not a 16-bit register like the IPRx registers, so it + would need special support */ + /*{ 72, INTPRI00, 8, ? },*/ /* TMU3 TUNI */ + /*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */ +}; + +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + +#define INTC_ICR 0xffd00000UL +#define INTC_ICR_IRLM (1<<7) + +/* enable individual interrupt mode for external interupts */ +void ipr_irq_enable_irlm(void) +{ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); +} + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map)); +#ifdef CONFIG_CPU_SUBTYPE_SH7751 + make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map)); +#endif +} diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c index 814ddb226531..9aeaa2ddaa28 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -79,25 +79,27 @@ static int __init sh7780_devices_setup(void) __initcall(sh7780_devices_setup); static struct intc2_data intc2_irq_table[] = { - { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2 }, - { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { 28, 0, 24, 0, 0, 2 }, /* TMU0 */ - { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { 21, 1, 0, 0, 2, 2 }, + { 22, 1, 1, 0, 2, 2 }, + { 23, 1, 2, 0, 2, 2 }, - { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, - { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, - { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, - { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, - { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, + { 40, 8, 24, 0, 3, 3 }, /* SCIF0 ERI */ + { 41, 8, 24, 0, 3, 3 }, /* SCIF0 RXI */ + { 42, 8, 24, 0, 3, 3 }, /* SCIF0 BRI */ + { 43, 8, 24, 0, 3, 3 }, /* SCIF0 TXI */ + + { 76, 8, 16, 0, 4, 3 }, /* SCIF1 ERI */ + { 77, 8, 16, 0, 4, 3 }, /* SCIF1 RXI */ + { 78, 8, 16, 0, 4, 3 }, /* SCIF1 BRI */ + { 79, 8, 16, 0, 4, 3 }, /* SCIF1 TXI */ + + { 64, 0x10, 8, 0, 14, 2 }, /* PCIC0 */ + { 65, 0x10, 0, 0, 15, 2 }, /* PCIC1 */ + { 66, 0x14, 24, 0, 16, 2 }, /* PCIC2 */ + { 67, 0x14, 16, 0, 17, 2 }, /* PCIC3 */ + { 68, 0x14, 8, 0, 18, 2 }, /* PCIC4 */ }; void __init init_IRQ_intc2(void) diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 7bcc73f9b8df..55f43506995a 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -19,7 +19,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/mm.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/page.h> #include <asm/cacheflush.h> #include <asm/cpu/sq.h> @@ -67,6 +67,7 @@ void sq_flush_range(unsigned long start, unsigned int len) /* Wait for completion */ store_queue_barrier(); } +EXPORT_SYMBOL(sq_flush_range); static inline void sq_mapping_list_add(struct sq_mapping *map) { @@ -166,7 +167,7 @@ unsigned long sq_remap(unsigned long phys, unsigned int size, map->size = size; map->name = name; - page = bitmap_find_free_region(sq_bitmap, 0x04000000, + page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT, get_order(map->size)); if (unlikely(page < 0)) { ret = -ENOSPC; @@ -193,6 +194,7 @@ out: kmem_cache_free(sq_cache, map); return ret; } +EXPORT_SYMBOL(sq_remap); /** * sq_unmap - Unmap a Store Queue allocation @@ -234,6 +236,7 @@ void sq_unmap(unsigned long vaddr) kmem_cache_free(sq_cache, map); } +EXPORT_SYMBOL(sq_unmap); /* * Needlessly complex sysfs interface. Unfortunately it doesn't seem like @@ -402,7 +405,3 @@ module_exit(sq_api_exit); MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>"); MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(sq_remap); -EXPORT_SYMBOL(sq_unmap); -EXPORT_SYMBOL(sq_flush_range); diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index a00022722e9e..60340823798a 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -12,7 +12,7 @@ #include <linux/console.h> #include <linux/tty.h> #include <linux/init.h> -#include <asm/io.h> +#include <linux/io.h> #ifdef CONFIG_SH_STANDARD_BIOS #include <asm/sh_bios.h> @@ -62,17 +62,9 @@ static struct console bios_console = { #include <linux/serial_core.h> #include "../../../drivers/serial/sh-sci.h" -#ifdef CONFIG_CPU_SH4 -#define SCIF_REG 0xffe80000 -#elif defined(CONFIG_CPU_SUBTYPE_SH72060) -#define SCIF_REG 0xfffe9800 -#else -#error "Undefined SCIF for this subtype" -#endif - static struct uart_port scif_port = { - .mapbase = SCIF_REG, - .membase = (char __iomem *)SCIF_REG, + .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, + .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, }; static void scif_sercon_putc(int c) @@ -113,23 +105,29 @@ static struct console scif_console = { .index = -1, }; +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +/* + * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 + * devices that aren't using sh-ipl+g. + */ static void scif_sercon_init(int baud) { - ctrl_outw(0, SCIF_REG + 8); - ctrl_outw(0, SCIF_REG); + ctrl_outw(0, scif_port.mapbase + 8); + ctrl_outw(0, scif_port.mapbase); /* Set baud rate */ ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1, SCIF_REG + 4); - - ctrl_outw(12, SCIF_REG + 24); - ctrl_outw(8, SCIF_REG + 24); - ctrl_outw(0, SCIF_REG + 32); - ctrl_outw(0x60, SCIF_REG + 16); - ctrl_outw(0, SCIF_REG + 36); - ctrl_outw(0x30, SCIF_REG + 8); + (32 * baud) - 1, scif_port.mapbase + 4); + + ctrl_outw(12, scif_port.mapbase + 24); + ctrl_outw(8, scif_port.mapbase + 24); + ctrl_outw(0, scif_port.mapbase + 32); + ctrl_outw(0x60, scif_port.mapbase + 16); + ctrl_outw(0, scif_port.mapbase + 36); + ctrl_outw(0x30, scif_port.mapbase + 8); } -#endif +#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */ +#endif /* CONFIG_EARLY_SCIF_CONSOLE */ /* * Setup a default console, if more than one is compiled in, rely on the @@ -168,7 +166,7 @@ int __init setup_early_printk(char *opt) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#ifdef CONFIG_CPU_SH4 +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) scif_sercon_init(115200); #endif } diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S new file mode 100644 index 000000000000..29136a35d7c7 --- /dev/null +++ b/arch/sh/kernel/entry-common.S @@ -0,0 +1,433 @@ +/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ + * + * linux/arch/sh/entry.S + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +! NOTE: +! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address +! to be jumped is too far, but it causes illegal slot exception. + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * NOTE: This code uses a convention that instructions in the delay slot + * of a transfer-control instruction are indented by an extra space, thus: + * + * jmp @k0 ! control-transfer instruction + * ldc k1, ssr ! delay slot + * + * Stack layout in 'ret_from_syscall': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in ptrace.c and ptrace.h + * + * r0 + * ... + * r15 = stack pointer + * spc + * pr + * ssr + * gbr + * mach + * macl + * syscall # + * + */ + +#if defined(CONFIG_PREEMPT) +# define preempt_stop() cli +#else +# define preempt_stop() +# define resume_kernel __restore_all +#endif + +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) +! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. +! If both are configured, handle the debug traps (breakpoints) in SW, +! but still allow BIOS traps to FW. + + .align 2 +debug_kernel: +#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) + /* Force BIOS call to FW (debug_trap put TRA in r8) */ + mov r8,r0 + shlr2 r0 + cmp/eq #0x3f,r0 + bt debug_kernel_fw +#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ + +debug_enter: +#if defined(CONFIG_SH_KGDB) + /* Jump to kgdb, pass stacked regs as arg */ +debug_kernel_sw: + mov.l 3f, r0 + jmp @r0 + mov r15, r4 + .align 2 +3: .long kgdb_handle_exception +#endif /* CONFIG_SH_KGDB */ + +#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ + + + .align 2 +debug_trap: +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + shll r0 + shll r0 ! kernel space? + bt/s debug_kernel +#endif + mov.l @r15, r0 ! Restore R0 value + mov.l 1f, r8 + jmp @r8 + nop + + .align 2 +ENTRY(exception_error) + ! +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 3f, r0 + jsr @r0 + nop +#endif + sti + mov.l 2f, r0 + jmp @r0 + nop + +! + .align 2 +1: .long break_point_trap_software +2: .long do_exception_error +#ifdef CONFIG_TRACE_IRQFLAGS +3: .long trace_hardirqs_on +#endif + + .align 2 +ret_from_exception: + preempt_stop() +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 4f, r0 + jsr @r0 + nop +#endif +ENTRY(ret_from_irq) + ! + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + shll r0 + shll r0 ! kernel space? + get_current_thread_info r8, r0 + bt resume_kernel ! Yes, it's from kernel, go back soon + +#ifdef CONFIG_PREEMPT + bra resume_userspace + nop +ENTRY(resume_kernel) + mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count + tst r0, r0 + bf noresched +need_resched: + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_NEED_RESCHED, r0 ! need_resched set? + bt noresched + + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + and #0xf0, r0 ! interrupts off (exception path)? + cmp/eq #0xf0, r0 + bt noresched + + mov.l 1f, r0 + mov.l r0, @(TI_PRE_COUNT,r8) + +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 3f, r0 + jsr @r0 + nop +#endif + sti + mov.l 2f, r0 + jsr @r0 + nop + mov #0, r0 + mov.l r0, @(TI_PRE_COUNT,r8) + cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 4f, r0 + jsr @r0 + nop +#endif + + bra need_resched + nop + +noresched: + bra __restore_all + nop + + .align 2 +1: .long PREEMPT_ACTIVE +2: .long schedule +#ifdef CONFIG_TRACE_IRQFLAGS +3: .long trace_hardirqs_on +4: .long trace_hardirqs_off +#endif +#endif + +ENTRY(resume_userspace) + ! r8: current_thread_info + cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r0 + jsr @r0 + nop +#endif + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_WORK_MASK, r0 + bt/s __restore_all + tst #_TIF_NEED_RESCHED, r0 + + .align 2 +work_pending: + ! r0: current_thread_info->flags + ! r8: current_thread_info + ! t: result of "tst #_TIF_NEED_RESCHED, r0" + bf/s work_resched + tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0 +work_notifysig: + bt/s __restore_all + mov r15, r4 + mov r12, r5 ! set arg1(save_r0) + mov r0, r6 + mov.l 2f, r1 + mov.l 3f, r0 + jmp @r1 + lds r0, pr +work_resched: +#ifndef CONFIG_PREEMPT + ! gUSA handling + mov.l @(OFF_SP,r15), r0 ! get user space stack pointer + mov r0, r1 + shll r0 + bf/s 1f + shll r0 + bf/s 1f + mov #OFF_PC, r0 + ! SP >= 0xc0000000 : gUSA mark + mov.l @(r0,r15), r2 ! get user space PC (program counter) + mov.l @(OFF_R0,r15), r3 ! end point + cmp/hs r3, r2 ! r2 >= r3? + bt 1f + add r3, r1 ! rewind point #2 + mov.l r1, @(r0,r15) ! reset PC to rewind point #2 + ! +1: +#endif + mov.l 1f, r1 + jsr @r1 ! schedule + nop + cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r0 + jsr @r0 + nop +#endif + ! + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_WORK_MASK, r0 + bt __restore_all + bra work_pending + tst #_TIF_NEED_RESCHED, r0 + + .align 2 +1: .long schedule +2: .long do_notify_resume +3: .long restore_all +#ifdef CONFIG_TRACE_IRQFLAGS +4: .long trace_hardirqs_on +5: .long trace_hardirqs_off +#endif + + .align 2 +syscall_exit_work: + ! r0: current_thread_info->flags + ! r8: current_thread_info + tst #_TIF_SYSCALL_TRACE, r0 + bt/s work_pending + tst #_TIF_NEED_RESCHED, r0 +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r0 + jsr @r0 + nop +#endif + sti + ! XXX setup arguments... + mov.l 4f, r0 ! do_syscall_trace + jsr @r0 + nop + bra resume_userspace + nop + + .align 2 +syscall_trace_entry: + ! Yes it is traced. + ! XXX setup arguments... + mov.l 4f, r11 ! Call do_syscall_trace which notifies + jsr @r11 ! superior (will chomp R[0-7]) + nop + ! Reload R0-R4 from kernel stack, where the + ! parent may have modified them using + ! ptrace(POKEUSR). (Note that R0-R2 are + ! used by the system call handler directly + ! from the kernel stack anyway, so don't need + ! to be reloaded here.) This allows the parent + ! to rewrite system calls and args on the fly. + mov.l @(OFF_R4,r15), r4 ! arg0 + mov.l @(OFF_R5,r15), r5 + mov.l @(OFF_R6,r15), r6 + mov.l @(OFF_R7,r15), r7 ! arg3 + mov.l @(OFF_R3,r15), r3 ! syscall_nr + ! + mov.l 2f, r10 ! Number of syscalls + cmp/hs r10, r3 + bf syscall_call + mov #-ENOSYS, r0 + bra syscall_exit + mov.l r0, @(OFF_R0,r15) ! Return value + +__restore_all: + mov.l 1f, r0 + jmp @r0 + nop + + .align 2 +1: .long restore_all + + .align 2 +not_syscall_tra: + bra debug_trap + nop + + .align 2 +syscall_badsys: ! Bad syscall number + mov #-ENOSYS, r0 + bra resume_userspace + mov.l r0, @(OFF_R0,r15) ! Return value + + +/* + * Syscall interface: + * + * Syscall #: R3 + * Arguments #0 to #3: R4--R7 + * Arguments #4 to #6: R0, R1, R2 + * TRA: (number of arguments + 0x10) x 4 + * + * This code also handles delegating other traps to the BIOS/gdb stub + * according to: + * + * Trap number + * (TRA>>2) Purpose + * -------- ------- + * 0x0-0xf old syscall ABI + * 0x10-0x1f new syscall ABI + * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. + * + * Note: When we're first called, the TRA value must be shifted + * right 2 bits in order to get the value that was used as the "trapa" + * argument. + */ + + .align 2 + .globl ret_from_fork +ret_from_fork: + mov.l 1f, r8 + jsr @r8 + mov r0, r4 + bra syscall_exit + nop + .align 2 +1: .long schedule_tail + ! +ENTRY(system_call) +#if !defined(CONFIG_CPU_SH2) + mov.l 1f, r9 + mov.l @r9, r8 ! Read from TRA (Trap Address) Register +#endif + ! + ! Is the trap argument >= 0x20? (TRA will be >= 0x80) + mov #0x7f, r9 + cmp/hi r9, r8 + bt/s not_syscall_tra + mov #OFF_TRA, r9 + add r15, r9 + mov.l r8, @r9 ! set TRA value to tra +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r10 + jsr @r10 + nop +#endif + sti + + ! + get_current_thread_info r8, r10 + mov.l @(TI_FLAGS,r8), r8 + mov #_TIF_SYSCALL_TRACE, r10 + tst r10, r8 + bf syscall_trace_entry + ! + mov.l 2f, r8 ! Number of syscalls + cmp/hs r8, r3 + bt syscall_badsys + ! +syscall_call: + shll2 r3 ! x4 + mov.l 3f, r8 ! Load the address of sys_call_table + add r8, r3 + mov.l @r3, r8 + jsr @r8 ! jump to specific syscall handler + nop + mov.l @(OFF_R0,r15), r12 ! save r0 + mov.l r0, @(OFF_R0,r15) ! save the return value + ! +syscall_exit: + cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 6f, r0 + jsr @r0 + nop +#endif + ! + get_current_thread_info r8, r0 + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_ALLWORK_MASK, r0 + bf syscall_exit_work + bra __restore_all + nop + .align 2 +#if !defined(CONFIG_CPU_SH2) +1: .long TRA +#endif +2: .long NR_syscalls +3: .long sys_call_table +4: .long do_syscall_trace +#ifdef CONFIG_TRACE_IRQFLAGS +5: .long trace_hardirqs_on +6: .long trace_hardirqs_off +#endif diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S index f5f53d14f245..6aca4bc6ec5d 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head.S @@ -33,7 +33,7 @@ ENTRY(empty_zero_page) .long 0x00360000 /* INITRD_START */ .long 0x000a0000 /* INITRD_SIZE */ .long 0 - .balign 4096,0,4096 + .balign PAGE_SIZE,0,PAGE_SIZE .text /* @@ -53,8 +53,10 @@ ENTRY(_stext) ldc r0, sr ! Initialize global interrupt mask mov #0, r0 +#ifdef CONFIG_CPU_HAS_SR_RB ldc r0, r6_bank - +#endif + /* * Prefetch if possible to reduce cache miss penalty. * @@ -68,11 +70,14 @@ ENTRY(_stext) ! mov.l 2f, r0 mov r0, r15 ! Set initial r15 (stack pointer) - mov #(THREAD_SIZE >> 8), r1 + mov #(THREAD_SIZE >> 10), r1 shll8 r1 ! r1 = THREAD_SIZE + shll2 r1 sub r1, r0 ! +#ifdef CONFIG_CPU_HAS_SR_RB ldc r0, r7_bank ! ... and initial thread_info - +#endif + ! Clear BSS area mov.l 3f, r1 add #4, r1 @@ -95,7 +100,11 @@ ENTRY(_stext) nop .balign 4 +#if defined(CONFIG_CPU_SH2) +1: .long 0x000000F0 ! IMASK=0xF +#else 1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF +#endif 2: .long init_thread_union+THREAD_SIZE 3: .long __bss_start 4: .long _end diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 944128ce9706..67be2b6e8cd1 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -12,7 +12,7 @@ #include <linux/kernel_stat.h> #include <linux/seq_file.h> #include <linux/io.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/thread_info.h> @@ -78,15 +78,16 @@ union irq_ctx { u32 stack[THREAD_SIZE/sizeof(u32)]; }; -static union irq_ctx *hardirq_ctx[NR_CPUS]; -static union irq_ctx *softirq_ctx[NR_CPUS]; +static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; +static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - struct pt_regs *old_regs = set_irq_regs(®s); + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct pt_regs *old_regs = set_irq_regs(regs); int irq; #ifdef CONFIG_4KSTACKS union irq_ctx *curctx, *irqctx; @@ -111,7 +112,7 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_CPU_HAS_INTEVT - irq = (ctrl_inl(INTEVT) >> 5) - 16; + irq = evt2irq(ctrl_inl(INTEVT)); #else irq = r4; #endif @@ -135,17 +136,24 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, irqctx->tinfo.task = curctx->tinfo.task; irqctx->tinfo.previous_sp = current_stack_pointer; + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + __asm__ __volatile__ ( "mov %0, r4 \n" - "mov r15, r9 \n" + "mov r15, r8 \n" "jsr @%1 \n" /* swith to the irq stack */ " mov %2, r15 \n" /* restore the stack (ring zero) */ - "mov r9, r15 \n" + "mov r8, r15 \n" : /* no outputs */ : "r" (irq), "r" (generic_handle_irq), "r" (isp) - /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "t", "pr" ); @@ -193,7 +201,7 @@ void irq_ctx_init(int cpu) irqctx->tinfo.task = NULL; irqctx->tinfo.exec_domain = NULL; irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET; + irqctx->tinfo.preempt_count = 0; irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); softirq_ctx[cpu] = irqctx; @@ -239,13 +247,38 @@ asmlinkage void do_softirq(void) "mov r9, r15 \n" : /* no outputs */ : "r" (__do_softirq), "r" (isp) - /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr" ); + + /* + * Shouldnt happen, we returned above if in_interrupt(): + */ + WARN_ON_ONCE(softirq_count()); } local_irq_restore(flags); } EXPORT_SYMBOL(do_softirq); #endif + +void __init init_IRQ(void) +{ +#ifdef CONFIG_CPU_HAS_PINT_IRQ + init_IRQ_pint(); +#endif + +#ifdef CONFIG_CPU_HAS_INTC2_IRQ + init_IRQ_intc2(); +#endif + +#ifdef CONFIG_CPU_HAS_IPR_IRQ + init_IRQ_ipr(); +#endif + + /* Perform the machine specific initialisation */ + if (sh_mv.mv_init_irq) + sh_mv.mv_init_irq(); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index a52b13ac6b7f..f3e2631be144 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -385,10 +385,11 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne asmlinkage int sys_fork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); #ifdef CONFIG_MMU - return do_fork(SIGCHLD, regs.regs[15], ®s, 0, NULL, NULL); + return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL); #else /* fork almost works, enough to trick you into looking elsewhere :-( */ return -EINVAL; @@ -398,11 +399,12 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5, asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, unsigned long parent_tidptr, unsigned long child_tidptr, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); if (!newsp) - newsp = regs.regs[15]; - return do_fork(clone_flags, newsp, ®s, 0, + newsp = regs->regs[15]; + return do_fork(clone_flags, newsp, regs, 0, (int __user *)parent_tidptr, (int __user *)child_tidptr); } @@ -418,9 +420,10 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, */ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.regs[15], ®s, + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->regs[15], regs, 0, NULL, NULL); } @@ -429,8 +432,9 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, */ asmlinkage int sys_execve(char *ufilename, char **uargv, char **uenvp, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int error; char *filename; @@ -442,7 +446,7 @@ asmlinkage int sys_execve(char *ufilename, char **uargv, error = do_execve(filename, (char __user * __user *)uargv, (char __user * __user *)uenvp, - ®s); + regs); if (error == 0) { task_lock(current); current->ptrace &= ~PT_DTRACE; @@ -472,9 +476,7 @@ unsigned long get_wchan(struct task_struct *p) return pc; } -asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs regs) +asmlinkage void break_point_trap(void) { /* Clear tracing. */ #if defined(CONFIG_CPU_SH4A) @@ -492,8 +494,10 @@ asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - regs.pc -= 2; + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + regs->pc -= 2; force_sig(SIGTRAP, current); } diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S index 8221b37c9773..c66cb3209db5 100644 --- a/arch/sh/kernel/relocate_kernel.S +++ b/arch/sh/kernel/relocate_kernel.S @@ -7,11 +7,9 @@ * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. */ - #include <linux/linkage.h> - -#define PAGE_SIZE 4096 /* must be same value as in <asm/page.h> */ - +#include <asm/addrspace.h> +#include <asm/page.h> .globl relocate_new_kernel relocate_new_kernel: @@ -20,8 +18,8 @@ relocate_new_kernel: /* r6 = start_address */ /* r7 = vbr_reg */ - mov.l 10f,r8 /* 4096 */ - mov.l 11f,r9 /* 0xa0000000 */ + mov.l 10f,r8 /* PAGE_SIZE */ + mov.l 11f,r9 /* P2SEG */ /* stack setting */ add r8,r5 @@ -32,7 +30,7 @@ relocate_new_kernel: 0: mov.l @r4+,r0 /* cmd = *ind++ */ -1: /* addr = (cmd | 0xa0000000) & 0xfffffff0 */ +1: /* addr = (cmd | P2SEG) & 0xfffffff0 */ mov r0,r2 or r9,r2 mov #-16,r1 @@ -92,7 +90,7 @@ relocate_new_kernel: 10: .long PAGE_SIZE 11: - .long 0xa0000000 + .long P2SEG relocate_new_kernel_end: diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 36d86f9ac38a..696ca75752d9 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -392,6 +392,7 @@ static int __init topology_init(void) subsys_initcall(topology_init); static const char *cpu_name[] = { + [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", @@ -404,6 +405,7 @@ static const char *cpu_name[] = { [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", + [CPU_SH7785] = "SH7785", [CPU_SH_NONE] = "Unknown" }; diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 8a2fd19dc9eb..c706f3bfd897 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -73,8 +73,6 @@ DECLARE_EXPORT(__lshrdi3); DECLARE_EXPORT(__movstr); DECLARE_EXPORT(__movstrSI16); -EXPORT_SYMBOL(strcpy); - #ifdef CONFIG_CPU_SH4 DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 5213f5bc6ce0..50d7c4993bef 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -37,7 +37,7 @@ asmlinkage int sys_sigsuspend(old_sigset_t mask, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); @@ -52,7 +52,7 @@ sys_sigsuspend(old_sigset_t mask, return -ERESTARTNOHAND; } -asmlinkage int +asmlinkage int sys_sigaction(int sig, const struct old_sigaction __user *act, struct old_sigaction __user *oact) { @@ -87,9 +87,11 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - return do_sigaltstack(uss, uoss, regs.regs[15]); + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + return do_sigaltstack(uss, uoss, regs->regs[15]); } @@ -98,7 +100,11 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, */ #define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */ -#define TRAP16 0xc310 /* Syscall w/no args (NR in R3) */ +#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A) +#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */ +#else +#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */ +#endif #define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */ struct sigframe @@ -194,9 +200,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - struct sigframe __user *frame = (struct sigframe __user *)regs.regs[15]; + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15]; sigset_t set; int r0; @@ -216,7 +223,7 @@ asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(®s, &frame->sc, &r0)) + if (restore_sigcontext(regs, &frame->sc, &r0)) goto badframe; return r0; @@ -227,9 +234,10 @@ badframe: asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.regs[15]; + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15]; sigset_t set; stack_t st; int r0; @@ -246,14 +254,14 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &r0)) + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) goto badframe; if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs.regs[15]); + do_sigaltstack(&st, NULL, regs->regs[15]); return r0; @@ -350,7 +358,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, } else { /* Generate return code (system call to sigreturn) */ err |= __put_user(MOVW(7), &frame->retcode[0]); - err |= __put_user(TRAP16, &frame->retcode[1]); + err |= __put_user(TRAP_NOARG, &frame->retcode[1]); err |= __put_user(OR_R0_R0, &frame->retcode[2]); err |= __put_user(OR_R0_R0, &frame->retcode[3]); err |= __put_user(OR_R0_R0, &frame->retcode[4]); @@ -430,7 +438,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, } else { /* Generate return code (system call to rt_sigreturn) */ err |= __put_user(MOVW(7), &frame->retcode[0]); - err |= __put_user(TRAP16, &frame->retcode[1]); + err |= __put_user(TRAP_NOARG, &frame->retcode[1]); err |= __put_user(OR_R0_R0, &frame->retcode[2]); err |= __put_user(OR_R0_R0, &frame->retcode[3]); err |= __put_user(OR_R0_R0, &frame->retcode[4]); diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c new file mode 100644 index 000000000000..0d5268afe80f --- /dev/null +++ b/arch/sh/kernel/stacktrace.c @@ -0,0 +1,43 @@ +/* + * arch/sh/kernel/stacktrace.c + * + * Stack trace management functions + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <linux/thread_info.h> +#include <asm/ptrace.h> + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace, struct task_struct *task) +{ + unsigned long *sp; + + if (!task) + task = current; + if (task == current) + sp = (unsigned long *)current_stack_pointer; + else + sp = (unsigned long *)task->thread.sp; + + while (!kstack_end(sp)) { + unsigned long addr = *sp++; + + if (__kernel_text_address(addr)) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = addr; + if (trace->nr_entries >= trace->max_entries) + break; + } + } +} diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 8fde95001c34..5083b6ed4b39 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -33,14 +33,15 @@ */ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int fd[2]; int error; error = do_pipe(fd); if (!error) { - regs.regs[1] = fd[1]; + regs->regs[1] = fd[1]; return fd[0]; } return error; @@ -50,6 +51,7 @@ unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ EXPORT_SYMBOL(shm_align_mask); +#ifdef CONFIG_MMU /* * To avoid cache aliases, we map the shared page with same color. */ @@ -135,6 +137,7 @@ full_search: addr = COLOUR_ALIGN(addr, pgoff); } } +#endif /* CONFIG_MMU */ static inline long do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 57e708d7b52d..c206c9504c4b 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -13,6 +13,8 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/profile.h> +#include <linux/timex.h> +#include <linux/sched.h> #include <asm/clock.h> #include <asm/rtc.h> #include <asm/timer.h> @@ -50,15 +52,20 @@ unsigned long long __attribute__ ((weak)) sched_clock(void) #ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { + unsigned long flags; unsigned long seq; unsigned long usec, sec; do { - seq = read_seqbegin(&xtime_lock); + /* + * Turn off IRQs when grabbing xtime_lock, so that + * the sys_timer get_offset code doesn't have to handle it. + */ + seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = get_timer_offset(); sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry(&xtime_lock, seq)); + usec += xtime.tv_nsec / NSEC_PER_USEC; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); while (usec >= 1000000) { usec -= 1000000; @@ -85,7 +92,7 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - nsec -= 1000 * get_timer_offset(); + nsec -= get_timer_offset() * NSEC_PER_USEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -169,6 +176,108 @@ static struct sysdev_class timer_sysclass = { .resume = timer_resume, }; +#ifdef CONFIG_NO_IDLE_HZ +static int timer_dyn_tick_enable(void) +{ + struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + spin_lock_irqsave(&dyn_tick->lock, flags); + ret = 0; + if (!(dyn_tick->state & DYN_TICK_ENABLED)) { + ret = dyn_tick->enable(); + + if (ret == 0) + dyn_tick->state |= DYN_TICK_ENABLED; + } + spin_unlock_irqrestore(&dyn_tick->lock, flags); + } + + return ret; +} + +static int timer_dyn_tick_disable(void) +{ + struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + spin_lock_irqsave(&dyn_tick->lock, flags); + ret = 0; + if (dyn_tick->state & DYN_TICK_ENABLED) { + ret = dyn_tick->disable(); + + if (ret == 0) + dyn_tick->state &= ~DYN_TICK_ENABLED; + } + spin_unlock_irqrestore(&dyn_tick->lock, flags); + } + + return ret; +} + +/* + * Reprogram the system timer for at least the calculated time interval. + * This function should be called from the idle thread with IRQs disabled, + * immediately before sleeping. + */ +void timer_dyn_reprogram(void) +{ + struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick; + unsigned long next, seq, flags; + + if (!dyn_tick) + return; + + spin_lock_irqsave(&dyn_tick->lock, flags); + if (dyn_tick->state & DYN_TICK_ENABLED) { + next = next_timer_interrupt(); + do { + seq = read_seqbegin(&xtime_lock); + dyn_tick->reprogram(next - jiffies); + } while (read_seqretry(&xtime_lock, seq)); + } + spin_unlock_irqrestore(&dyn_tick->lock, flags); +} + +static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%i\n", + (sys_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1); +} + +static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned int enable = simple_strtoul(buf, NULL, 2); + + if (enable) + timer_dyn_tick_enable(); + else + timer_dyn_tick_disable(); + + return count; +} +static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick); + +/* + * dyntick=enable|disable + */ +static char dyntick_str[4] __initdata = ""; + +static int __init dyntick_setup(char *str) +{ + if (str) + strlcpy(dyntick_str, str, sizeof(dyntick_str)); + return 1; +} + +__setup("dyntick=", dyntick_setup); +#endif + static int __init timer_init_sysfs(void) { int ret = sysdev_class_register(&timer_sysclass); @@ -176,7 +285,22 @@ static int __init timer_init_sysfs(void) return ret; sys_timer->dev.cls = &timer_sysclass; - return sysdev_register(&sys_timer->dev); + ret = sysdev_register(&sys_timer->dev); + +#ifdef CONFIG_NO_IDLE_HZ + if (ret == 0 && sys_timer->dyn_tick) { + ret = sysdev_create_file(&sys_timer->dev, &attr_dyn_tick); + + /* + * Turn on dynamic tick after calibrate delay + * for correct bogomips + */ + if (ret == 0 && dyntick_str[0] == 'e') + ret = timer_dyn_tick_enable(); + } +#endif + + return ret; } device_initcall(timer_init_sysfs); @@ -200,6 +324,11 @@ void __init time_init(void) sys_timer = get_sys_timer(); printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); +#ifdef CONFIG_NO_IDLE_HZ + if (sys_timer->dyn_tick) + spin_lock_init(&sys_timer->dyn_tick->lock); +#endif + #if defined(CONFIG_SH_KGDB) /* * Set up kgdb as requested. We do it here because the serial diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile index 151a6a304cec..bcf244ff6a12 100644 --- a/arch/sh/kernel/timers/Makefile +++ b/arch/sh/kernel/timers/Makefile @@ -5,4 +5,6 @@ obj-y := timer.o obj-$(CONFIG_SH_TMU) += timer-tmu.o +obj-$(CONFIG_SH_MTU2) += timer-mtu2.o +obj-$(CONFIG_SH_CMT) += timer-cmt.o diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c new file mode 100644 index 000000000000..a574b93a4e7b --- /dev/null +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -0,0 +1,196 @@ +/* + * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support + * + * Copyright (C) 2005 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/seqlock.h> +#include <asm/timer.h> +#include <asm/rtc.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/clock.h> + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define CMT_CMSTR 0xf84a0070 +#define CMT_CMCSR_0 0xf84a0072 +#define CMT_CMCNT_0 0xf84a0074 +#define CMT_CMCOR_0 0xf84a0076 +#define CMT_CMCSR_1 0xf84a0078 +#define CMT_CMCNT_1 0xf84a007a +#define CMT_CMCOR_1 0xf84a007c + +#define STBCR3 0xf80a0000 +#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) +#define CMT_CMCSR_INIT 0x0040 +#define CMT_CMCSR_CALIB 0x0000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7206) +#define CMT_CMSTR 0xfffec000 +#define CMT_CMCSR_0 0xfffec002 +#define CMT_CMCNT_0 0xfffec004 +#define CMT_CMCOR_0 0xfffec006 + +#define STBCR4 0xfffe040c +#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0) +#define CMT_CMCSR_INIT 0x0040 +#define CMT_CMCSR_CALIB 0x0000 +#else +#error "Unknown CPU SUBTYPE" +#endif + +static unsigned long cmt_timer_get_offset(void) +{ + int count; + static unsigned short count_p = 0xffff; /* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + /* timer count may underflow right here */ + count = ctrl_inw(CMT_CMCOR_0); + count -= ctrl_inw(CMT_CMCNT_0); + + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there is one kind of problem that must be avoided here: + * 1. the timer counter underflows + */ + + if (jiffies_t == jiffies_p) { + if (count > count_p) { + /* the nutcase */ + if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */ + count -= LATCH; + } else { + printk("%s (): hardware timer problem?\n", + __FUNCTION__); + } + } + } else + jiffies_p = jiffies_t; + + count_p = count; + + count = ((LATCH-1) - count) * TICK_SIZE; + count = (count + LATCH/2) / LATCH; + + return count; +} + +static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id) +{ + unsigned long timer_status; + + /* Clear CMF bit */ + timer_status = ctrl_inw(CMT_CMCSR_0); + timer_status &= ~0x80; + ctrl_outw(timer_status, CMT_CMCSR_0); + + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + handle_timer_tick(); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction cmt_irq = { + .name = "timer", + .handler = cmt_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, + .mask = CPU_MASK_NONE, +}; + +static void cmt_clk_init(struct clk *clk) +{ + u8 divisor = CMT_CMCSR_INIT & 0x3; + ctrl_inw(CMT_CMCSR_0); + ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0); + clk->parent = clk_get(NULL, "module_clk"); + clk->rate = clk->parent->rate / (8 << (divisor << 1)); +} + +static void cmt_clk_recalc(struct clk *clk) +{ + u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3; + clk->rate = clk->parent->rate / (8 << (divisor << 1)); +} + +static struct clk_ops cmt_clk_ops = { + .init = cmt_clk_init, + .recalc = cmt_clk_recalc, +}; + +static struct clk cmt0_clk = { + .name = "cmt0_clk", + .ops = &cmt_clk_ops, +}; + +static int cmt_timer_start(void) +{ + ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); + return 0; +} + +static int cmt_timer_stop(void) +{ + ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); + return 0; +} + +static int cmt_timer_init(void) +{ + unsigned long interval; + + cmt_clock_enable(); + + setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq); + + cmt0_clk.parent = clk_get(NULL, "module_clk"); + + cmt_timer_stop(); + + interval = cmt0_clk.parent->rate / 8 / HZ; + printk(KERN_INFO "Interval = %ld\n", interval); + + ctrl_outw(interval, CMT_CMCOR_0); + + clk_register(&cmt0_clk); + clk_enable(&cmt0_clk); + + cmt_timer_start(); + + return 0; +} + +struct sys_timer_ops cmt_timer_ops = { + .init = cmt_timer_init, + .start = cmt_timer_start, + .stop = cmt_timer_stop, +#ifndef CONFIG_GENERIC_TIME + .get_offset = cmt_timer_get_offset, +#endif +}; + +struct sys_timer cmt_timer = { + .name = "cmt", + .ops = &cmt_timer_ops, +}; diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c new file mode 100644 index 000000000000..fffcd1c09873 --- /dev/null +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -0,0 +1,200 @@ +/* + * arch/sh/kernel/timers/timer-mtu2.c - MTU2 Timer Support + * + * Copyright (C) 2005 Paul Mundt + * + * Based off of arch/sh/kernel/timers/timer-tmu.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/seqlock.h> +#include <asm/timer.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/clock.h> + +/* + * We use channel 1 for our lowly system timer. Channel 2 would be the other + * likely candidate, but we leave it alone as it has higher divisors that + * would be of more use to other more interesting applications. + * + * TODO: Presently we only implement a 16-bit single-channel system timer. + * However, we can implement channel cascade if we go the overflow route and + * get away with using 2 MTU2 channels as a 32-bit timer. + */ +#define MTU2_TSTR 0xfffe4280 +#define MTU2_TCR_1 0xfffe4380 +#define MTU2_TMDR_1 0xfffe4381 +#define MTU2_TIOR_1 0xfffe4382 +#define MTU2_TIER_1 0xfffe4384 +#define MTU2_TSR_1 0xfffe4385 +#define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */ +#define MTU2_TGRA_1 0xfffe438a + +#define STBCR3 0xfffe0408 + +#define MTU2_TSTR_CST1 (1 << 1) /* Counter Start 1 */ + +#define MTU2_TSR_TGFA (1 << 0) /* GRA compare match */ + +#define MTU2_TIER_TGIEA (1 << 0) /* GRA compare match interrupt enable */ + +#define MTU2_TCR_INIT 0x22 + +#define MTU2_TCR_CALIB 0x00 + +static unsigned long mtu2_timer_get_offset(void) +{ + int count; + static int count_p = 0x7fff; /* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + /* timer count may underflow right here */ + count = ctrl_inw(MTU2_TCNT_1); /* read the latched count */ + + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there is one kind of problem that must be avoided here: + * 1. the timer counter underflows + */ + + if (jiffies_t == jiffies_p) { + if (count > count_p) { + if (ctrl_inb(MTU2_TSR_1) & MTU2_TSR_TGFA) { + count -= LATCH; + } else { + printk("%s (): hardware timer problem?\n", + __FUNCTION__); + } + } + } else + jiffies_p = jiffies_t; + + count_p = count; + + count = ((LATCH-1) - count) * TICK_SIZE; + count = (count + LATCH/2) / LATCH; + + return count; +} + +static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id) +{ + unsigned long timer_status; + + /* Clear TGFA bit */ + timer_status = ctrl_inb(MTU2_TSR_1); + timer_status &= ~MTU2_TSR_TGFA; + ctrl_outb(timer_status, MTU2_TSR_1); + + /* Do timer tick */ + write_seqlock(&xtime_lock); + handle_timer_tick(); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction mtu2_irq = { + .name = "timer", + .handler = mtu2_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, + .mask = CPU_MASK_NONE, +}; + +static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 }; + +static void mtu2_clk_init(struct clk *clk) +{ + u8 idx = MTU2_TCR_INIT & 0x7; + + clk->rate = clk->parent->rate / divisors[idx]; + /* Start TCNT counting */ + ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR); + +} + +static void mtu2_clk_recalc(struct clk *clk) +{ + u8 idx = ctrl_inb(MTU2_TCR_1) & 0x7; + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops mtu2_clk_ops = { + .init = mtu2_clk_init, + .recalc = mtu2_clk_recalc, +}; + +static struct clk mtu2_clk1 = { + .name = "mtu2_clk1", + .ops = &mtu2_clk_ops, +}; + +static int mtu2_timer_start(void) +{ + ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR); + return 0; +} + +static int mtu2_timer_stop(void) +{ + ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR); + return 0; +} + +static int mtu2_timer_init(void) +{ + u8 tmp; + unsigned long interval; + + setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq); + + mtu2_clk1.parent = clk_get(NULL, "module_clk"); + + ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3); + + /* Normal operation */ + ctrl_outb(0, MTU2_TMDR_1); + ctrl_outb(MTU2_TCR_INIT, MTU2_TCR_1); + ctrl_outb(0x01, MTU2_TIOR_1); + + /* Enable underflow interrupt */ + ctrl_outb(ctrl_inb(MTU2_TIER_1) | MTU2_TIER_TGIEA, MTU2_TIER_1); + + interval = CONFIG_SH_PCLK_FREQ / 16 / HZ; + printk(KERN_INFO "Interval = %ld\n", interval); + + ctrl_outw(interval, MTU2_TGRA_1); + ctrl_outw(0, MTU2_TCNT_1); + + clk_register(&mtu2_clk1); + clk_enable(&mtu2_clk1); + + return 0; +} + +struct sys_timer_ops mtu2_timer_ops = { + .init = mtu2_timer_init, + .start = mtu2_timer_start, + .stop = mtu2_timer_stop, +#ifndef CONFIG_GENERIC_TIME + .get_offset = mtu2_timer_get_offset, +#endif +}; + +struct sys_timer mtu2_timer = { + .name = "mtu2", + .ops = &mtu2_timer_ops, +}; diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 24927015dc31..e060e71d0785 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> -#include <linux/spinlock.h> #include <linux/seqlock.h> #include <asm/timer.h> #include <asm/rtc.h> @@ -31,13 +30,9 @@ #define TMU0_TCR_CALIB 0x0000 -static DEFINE_SPINLOCK(tmu0_lock); - static unsigned long tmu_timer_get_offset(void) { int count; - unsigned long flags; - static int count_p = 0x7fffffff; /* for the first call after boot */ static unsigned long jiffies_p = 0; @@ -46,7 +41,6 @@ static unsigned long tmu_timer_get_offset(void) */ unsigned long jiffies_t; - spin_lock_irqsave(&tmu0_lock, flags); /* timer count may underflow right here */ count = ctrl_inl(TMU0_TCNT); /* read the latched count */ @@ -72,7 +66,6 @@ static unsigned long tmu_timer_get_offset(void) jiffies_p = jiffies_t; count_p = count; - spin_unlock_irqrestore(&tmu0_lock, flags); count = ((LATCH-1) - count) * TICK_SIZE; count = (count + LATCH/2) / LATCH; @@ -106,7 +99,7 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) static struct irqaction tmu_irq = { .name = "timer", .handler = tmu_timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .mask = CPU_MASK_NONE, }; @@ -149,9 +142,9 @@ static int tmu_timer_init(void) { unsigned long interval; - setup_irq(TIMER_IRQ, &tmu_irq); + setup_irq(CONFIG_SH_TIMER_IRQ, &tmu_irq); - tmu0_clk.parent = clk_get("module_clk"); + tmu0_clk.parent = clk_get(NULL, "module_clk"); /* Start TMU0 */ tmu_timer_stop(); diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c index dc1f631053a8..a6bcc913d25e 100644 --- a/arch/sh/kernel/timers/timer.c +++ b/arch/sh/kernel/timers/timer.c @@ -17,6 +17,12 @@ static struct sys_timer *sys_timers[] __initdata = { #ifdef CONFIG_SH_TMU &tmu_timer, #endif +#ifdef CONFIG_SH_MTU2 + &mtu2_timer, +#endif +#ifdef CONFIG_SH_CMT + &cmt_timer, +#endif NULL, }; diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 53dfa55f3156..3762d9dc2046 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -18,13 +18,14 @@ #include <linux/module.h> #include <linux/kallsyms.h> #include <linux/io.h> +#include <linux/debug_locks.h> #include <asm/system.h> #include <asm/uaccess.h> #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> -#define CHK_REMOTE_DEBUG(regs) \ -{ \ +#define CHK_REMOTE_DEBUG(regs) \ +{ \ if (kgdb_debug_hook && !user_mode(regs))\ (*kgdb_debug_hook)(regs); \ } @@ -33,8 +34,13 @@ #endif #ifdef CONFIG_CPU_SH2 -#define TRAP_RESERVED_INST 4 -#define TRAP_ILLEGAL_SLOT_INST 6 +# define TRAP_RESERVED_INST 4 +# define TRAP_ILLEGAL_SLOT_INST 6 +# define TRAP_ADDRESS_ERROR 9 +# ifdef CONFIG_CPU_SH2A +# define TRAP_DIVZERO_ERROR 17 +# define TRAP_DIVOVF_ERROR 18 +# endif #else #define TRAP_RESERVED_INST 12 #define TRAP_ILLEGAL_SLOT_INST 13 @@ -88,7 +94,7 @@ void die(const char * str, struct pt_regs * regs, long err) if (!user_mode(regs) || in_interrupt()) dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + - (unsigned long)task_stack_page(current)); + (unsigned long)task_stack_page(current)); bust_spinlocks(0); spin_unlock_irq(&die_lock); @@ -102,8 +108,6 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs, die(str, regs, err); } -static int handle_unaligned_notify_count = 10; - /* * try and fix up kernelspace address errors * - userspace errors just cause EFAULT to be returned, resulting in SEGV @@ -198,7 +202,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) if (copy_to_user(dst,src,4)) goto fetch_fault; ret = 0; - break; + break; case 2: /* mov.[bwl] to memory, possibly with pre-decrement */ if (instruction & 4) @@ -222,7 +226,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) if (copy_from_user(dst,src,4)) goto fetch_fault; ret = 0; - break; + break; case 6: /* mov.[bwl] from memory, possibly with post-increment */ src = (unsigned char*) *rm; @@ -230,7 +234,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) *rm += count; dst = (unsigned char*) rn; *(unsigned long*)dst = 0; - + #ifdef __LITTLE_ENDIAN__ if (copy_from_user(dst, src, count)) goto fetch_fault; @@ -241,7 +245,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) } #else dst += 4-count; - + if (copy_from_user(dst, src, count)) goto fetch_fault; @@ -320,7 +324,8 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs) return -EFAULT; /* kernel */ - die("delay-slot-insn faulting in handle_unaligned_delayslot", regs, 0); + die("delay-slot-insn faulting in handle_unaligned_delayslot", + regs, 0); } return handle_unaligned_ins(instruction,regs); @@ -342,6 +347,13 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs) #define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4) #define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4) +/* + * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit + * opcodes.. + */ +#ifndef CONFIG_CPU_SH2A +static int handle_unaligned_notify_count = 10; + static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) { u_int rm; @@ -354,7 +366,8 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) if (user_mode(regs) && handle_unaligned_notify_count>0) { handle_unaligned_notify_count--; - printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", + printk(KERN_NOTICE "Fixing up unaligned userspace access " + "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", current->comm,current->pid,(u16*)regs->pc,instruction); } @@ -478,32 +491,58 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) regs->pc += 2; return ret; } +#endif /* CONFIG_CPU_SH2A */ + +#ifdef CONFIG_CPU_HAS_SR_RB +#define lookup_exception_vector(x) \ + __asm__ __volatile__ ("stc r2_bank, %0\n\t" : "=r" ((x))) +#else +#define lookup_exception_vector(x) \ + __asm__ __volatile__ ("mov r4, %0\n\t" : "=r" ((x))) +#endif /* - * Handle various address error exceptions + * Handle various address error exceptions: + * - instruction address error: + * misaligned PC + * PC >= 0x80000000 in user mode + * - data address error (read and write) + * misaligned data access + * access to >= 0x80000000 is user mode + * Unfortuntaly we can't distinguish between instruction address error + * and data address errors caused by read acceses. */ -asmlinkage void do_address_error(struct pt_regs *regs, +asmlinkage void do_address_error(struct pt_regs *regs, unsigned long writeaccess, unsigned long address) { - unsigned long error_code; + unsigned long error_code = 0; mm_segment_t oldfs; + siginfo_t info; +#ifndef CONFIG_CPU_SH2A u16 instruction; int tmp; +#endif - asm volatile("stc r2_bank,%0": "=r" (error_code)); + /* Intentional ifdef */ +#ifdef CONFIG_CPU_HAS_SR_RB + lookup_exception_vector(error_code); +#endif oldfs = get_fs(); if (user_mode(regs)) { + int si_code = BUS_ADRERR; + local_irq_enable(); - current->thread.error_code = error_code; - current->thread.trap_no = (writeaccess) ? 8 : 7; /* bad PC is not something we can fix */ - if (regs->pc & 1) + if (regs->pc & 1) { + si_code = BUS_ADRALN; goto uspace_segv; + } +#ifndef CONFIG_CPU_SH2A set_fs(USER_DS); if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { /* Argh. Fault on the instruction itself. @@ -518,14 +557,23 @@ asmlinkage void do_address_error(struct pt_regs *regs, if (tmp==0) return; /* sorted */ +#endif - uspace_segv: - printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm); - force_sig(SIGSEGV, current); +uspace_segv: + printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned " + "access (PC %lx PR %lx)\n", current->comm, regs->pc, + regs->pr); + + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void *) address; + force_sig_info(SIGBUS, &info, current); } else { if (regs->pc & 1) die("unaligned program counter", regs, error_code); +#ifndef CONFIG_CPU_SH2A set_fs(KERNEL_DS); if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { /* Argh. Fault on the instruction itself. @@ -537,6 +585,12 @@ asmlinkage void do_address_error(struct pt_regs *regs, handle_unaligned_access(instruction, regs); set_fs(oldfs); +#else + printk(KERN_NOTICE "Killing process \"%s\" due to unaligned " + "access\n", current->comm); + + force_sig(SIGSEGV, current); +#endif } } @@ -548,7 +602,7 @@ int is_dsp_inst(struct pt_regs *regs) { unsigned short inst; - /* + /* * Safe guard if DSP mode is already enabled or we're lacking * the DSP altogether. */ @@ -569,27 +623,49 @@ int is_dsp_inst(struct pt_regs *regs) #define is_dsp_inst(regs) (0) #endif /* CONFIG_SH_DSP */ +#ifdef CONFIG_CPU_SH2A +asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + siginfo_t info; + + switch (r4) { + case TRAP_DIVZERO_ERROR: + info.si_code = FPE_INTDIV; + break; + case TRAP_DIVOVF_ERROR: + info.si_code = FPE_INTOVF; + break; + } + + force_sig_info(SIGFPE, &info, current); +} +#endif + /* arch/sh/kernel/cpu/sh4/fpu.c */ extern int do_fpu_inst(unsigned short, struct pt_regs *); extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, struct pt_regs regs); + unsigned long r6, unsigned long r7, struct pt_regs __regs); asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); unsigned long error_code; struct task_struct *tsk = current; #ifdef CONFIG_SH_FPU_EMU - unsigned short inst; + unsigned short inst = 0; int err; - get_user(inst, (unsigned short*)regs.pc); + get_user(inst, (unsigned short*)regs->pc); - err = do_fpu_inst(inst, ®s); + err = do_fpu_inst(inst, regs); if (!err) { - regs.pc += 2; + regs->pc += 2; return; } /* not a FPU inst. */ @@ -597,20 +673,19 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, #ifdef CONFIG_SH_DSP /* Check if it's a DSP instruction */ - if (is_dsp_inst(®s)) { + if (is_dsp_inst(regs)) { /* Enable DSP mode, and restart instruction. */ - regs.sr |= SR_DSP; + regs->sr |= SR_DSP; return; } #endif - asm volatile("stc r2_bank, %0": "=r" (error_code)); + lookup_exception_vector(error_code); + local_irq_enable(); - tsk->thread.error_code = error_code; - tsk->thread.trap_no = TRAP_RESERVED_INST; - CHK_REMOTE_DEBUG(®s); + CHK_REMOTE_DEBUG(regs); force_sig(SIGILL, tsk); - die_if_no_fixup("reserved instruction", ®s, error_code); + die_if_no_fixup("reserved instruction", regs, error_code); } #ifdef CONFIG_SH_FPU_EMU @@ -658,39 +733,41 @@ static int emulate_branch(unsigned short inst, struct pt_regs* regs) asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); unsigned long error_code; struct task_struct *tsk = current; #ifdef CONFIG_SH_FPU_EMU - unsigned short inst; + unsigned short inst = 0; - get_user(inst, (unsigned short *)regs.pc + 1); - if (!do_fpu_inst(inst, ®s)) { - get_user(inst, (unsigned short *)regs.pc); - if (!emulate_branch(inst, ®s)) + get_user(inst, (unsigned short *)regs->pc + 1); + if (!do_fpu_inst(inst, regs)) { + get_user(inst, (unsigned short *)regs->pc); + if (!emulate_branch(inst, regs)) return; /* fault in branch.*/ } /* not a FPU inst. */ #endif - asm volatile("stc r2_bank, %0": "=r" (error_code)); + lookup_exception_vector(error_code); + local_irq_enable(); - tsk->thread.error_code = error_code; - tsk->thread.trap_no = TRAP_RESERVED_INST; - CHK_REMOTE_DEBUG(®s); + CHK_REMOTE_DEBUG(regs); force_sig(SIGILL, tsk); - die_if_no_fixup("illegal slot instruction", ®s, error_code); + die_if_no_fixup("illegal slot instruction", regs, error_code); } asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); long ex; - asm volatile("stc r2_bank, %0" : "=r" (ex)); - die_if_kernel("exception", ®s, ex); + + lookup_exception_vector(ex); + die_if_kernel("exception", regs, ex); } #if defined(CONFIG_SH_STANDARD_BIOS) @@ -735,12 +812,16 @@ void *set_exception_table_vec(unsigned int vec, void *handler) { extern void *exception_handling_table[]; void *old_handler; - + old_handler = exception_handling_table[vec]; exception_handling_table[vec] = handler; return old_handler; } +extern asmlinkage void address_error_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs); + void __init trap_init(void) { set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); @@ -759,7 +840,15 @@ void __init trap_init(void) set_exception_table_evt(0x800, do_fpu_state_restore); set_exception_table_evt(0x820, do_fpu_state_restore); #endif - + +#ifdef CONFIG_CPU_SH2 + set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_handler); +#endif +#ifdef CONFIG_CPU_SH2A + set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); + set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); +#endif + /* Setup VBR for boot cpu */ per_cpu_trap_init(); } @@ -784,6 +873,11 @@ void show_trace(struct task_struct *tsk, unsigned long *sp, } printk("\n"); + + if (!tsk) + tsk = current; + + debug_show_held_locks(tsk); } void show_stack(struct task_struct *tsk, unsigned long *sp) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 9dd606464d23..4e0362f50384 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -4,8 +4,12 @@ menu "Processor selection" # Processor families # config CPU_SH2 + select SH_WRITETHROUGH if !CPU_SH2A bool - select SH_WRITETHROUGH + +config CPU_SH2A + bool + select CPU_SH2 config CPU_SH3 bool @@ -16,6 +20,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB + select CPU_HAS_PTEA if !CPU_SUBTYPE_ST40 config CPU_SH4A bool @@ -40,6 +45,16 @@ config CPU_SUBTYPE_SH7604 bool "Support SH7604 processor" select CPU_SH2 +config CPU_SUBTYPE_SH7619 + bool "Support SH7619 processor" + select CPU_SH2 + +comment "SH-2A Processor Support" + +config CPU_SUBTYPE_SH7206 + bool "Support SH7206 processor" + select CPU_SH2A + comment "SH-3 Processor Support" config CPU_SUBTYPE_SH7300 @@ -89,6 +104,7 @@ comment "SH-4 Processor Support" config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" select CPU_SH4 + select CPU_HAS_IPR_IRQ help Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. @@ -104,15 +120,18 @@ config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 select CPU_SUBTYPE_SH7750 + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 select CPU_SUBTYPE_SH7750 + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7751 bool "Support SH7751 processor" select CPU_SH4 + select CPU_HAS_IPR_IRQ help Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, or if you have a HD6417751R CPU. @@ -121,6 +140,7 @@ config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 select CPU_SUBTYPE_SH7751 + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" @@ -157,6 +177,11 @@ config CPU_SUBTYPE_SH7780 select CPU_SH4A select CPU_HAS_INTC2_IRQ +config CPU_SUBTYPE_SH7785 + bool "Support SH7785 processor" + select CPU_SH4A + select CPU_HAS_INTC2_IRQ + comment "SH4AL-DSP Processor Support" config CPU_SUBTYPE_SH73180 @@ -216,13 +241,22 @@ config MEMORY_SIZE config 32BIT bool "Support 32-bit physical addressing through PMB" - depends on CPU_SH4A && MMU + depends on CPU_SH4A && MMU && (!X2TLB || BROKEN) default y help If you say Y here, physical addressing will be extended to 32-bits through the SH-4A PMB. If this is not set, legacy 29-bit physical addressing will be used. +config X2TLB + bool "Enable extended TLB mode" + depends on CPU_SUBTYPE_SH7785 && MMU && EXPERIMENTAL + help + Selecting this option will enable the extended mode of the SH-X2 + TLB. For legacy SH-X behaviour and interoperability, say N. For + all of the fun new features and a willingless to submit bug reports, + say Y. + config VSYSCALL bool "Support vsyscall page" depends on MMU @@ -237,16 +271,52 @@ config VSYSCALL (the default value) say Y. choice + prompt "Kernel page size" + default PAGE_SIZE_4KB + +config PAGE_SIZE_4KB + bool "4kB" + help + This is the default page size used by all SuperH CPUs. + +config PAGE_SIZE_8KB + bool "8kB" + depends on EXPERIMENTAL && X2TLB + help + This enables 8kB pages as supported by SH-X2 and later MMUs. + +config PAGE_SIZE_64KB + bool "64kB" + depends on EXPERIMENTAL && CPU_SH4 + help + This enables support for 64kB pages, possible on all SH-4 + CPUs and later. Highly experimental, not recommended. + +endchoice + +choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && CPU_SH4 && MMU default HUGETLB_PAGE_SIZE_64K config HUGETLB_PAGE_SIZE_64K - bool "64K" + bool "64kB" + +config HUGETLB_PAGE_SIZE_256K + bool "256kB" + depends on X2TLB config HUGETLB_PAGE_SIZE_1MB bool "1MB" +config HUGETLB_PAGE_SIZE_4MB + bool "4MB" + depends on X2TLB + +config HUGETLB_PAGE_SIZE_64MB + bool "64MB" + depends on X2TLB + endchoice source "mm/Kconfig" @@ -274,7 +344,6 @@ config SH_DIRECT_MAPPED config SH_WRITETHROUGH bool "Use write-through caching" - default y if CPU_SH2 help Selecting this option will configure the caches in write-through mode, as opposed to the default write-back configuration. diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c index 2689cb24ea2b..6614033f6be9 100644 --- a/arch/sh/mm/cache-sh2.c +++ b/arch/sh/mm/cache-sh2.c @@ -5,6 +5,7 @@ * * Released under the terms of the GNU GPL v2.0. */ + #include <linux/init.h> #include <linux/mm.h> @@ -14,37 +15,43 @@ #include <asm/cacheflush.h> #include <asm/io.h> -/* - * Calculate the OC address and set the way bit on the SH-2. - * - * We must have already jump_to_P2()'ed prior to calling this - * function, since we rely on CCR manipulation to do the - * Right Thing(tm). - */ -unsigned long __get_oc_addr(unsigned long set, unsigned long way) +void __flush_wback_region(void *start, int size) { - unsigned long ccr; - - /* - * On SH-2 the way bit isn't tracked in the address field - * if we're doing address array access .. instead, we need - * to manually switch out the way in the CCR. - */ - ccr = ctrl_inl(CCR); - ccr &= ~0x00c0; - ccr |= way << cpu_data->dcache.way_shift; - - /* - * Despite the number of sets being halved, we end up losing - * the first 2 ways to OCRAM instead of the last 2 (if we're - * 4-way). As a result, forcibly setting the W1 bit handily - * bumps us up 2 ways. - */ - if (ccr & CCR_CACHE_ORA) - ccr |= 1 << (cpu_data->dcache.way_shift + 1); - - ctrl_outl(ccr, CCR); - - return CACHE_OC_ADDRESS_ARRAY | (set << cpu_data->dcache.entry_shift); + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + /* FIXME cache purge */ + ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + } +} + +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + } +} + +void __flush_invalidate_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + } } diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index e48cc22724d9..ae531affccbd 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -11,12 +11,8 @@ */ #include <linux/init.h> #include <linux/mm.h> -#include <asm/addrspace.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/pgalloc.h> +#include <linux/io.h> +#include <linux/mutex.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -83,9 +79,9 @@ static void __init emit_cache_params(void) */ /* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */ -#define MAX_P3_SEMAPHORES 16 +#define MAX_P3_MUTEXES 16 -struct semaphore p3map_sem[MAX_P3_SEMAPHORES]; +struct mutex p3map_mutex[MAX_P3_MUTEXES]; void __init p3_cache_init(void) { @@ -115,7 +111,7 @@ void __init p3_cache_init(void) panic("%s failed.", __FUNCTION__); for (i = 0; i < cpu_data->dcache.n_aliases; i++) - sema_init(&p3map_sem[i], 1); + mutex_init(&p3map_mutex[i]); } /* @@ -229,7 +225,7 @@ static inline void flush_cache_4096(unsigned long start, */ if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) - exec_offset = 0x20000000; + exec_offset = 0x20000000; local_irq_save(flags); __flush_cache_4096(start | SH_CACHE_ASSOC, @@ -250,7 +246,7 @@ void flush_dcache_page(struct page *page) /* Loop all the D-cache */ n = cpu_data->dcache.n_aliases; - for (i = 0; i < n; i++, addr += PAGE_SIZE) + for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S index 7b96425ae270..8a706131e521 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/mm/clear_page.S @@ -1,12 +1,12 @@ -/* $Id: clear_page.S,v 1.13 2003/08/25 17:03:10 lethal Exp $ - * +/* * __clear_user_page, __clear_user, clear_page implementation of SuperH * * Copyright (C) 2001 Kaz Kojima * Copyright (C) 2001, 2002 Niibe Yutaka - * + * Copyright (C) 2006 Paul Mundt */ #include <linux/linkage.h> +#include <asm/page.h> /* * clear_page_slow @@ -18,11 +18,11 @@ /* * r0 --- scratch * r4 --- to - * r5 --- to + 4096 + * r5 --- to + PAGE_SIZE */ ENTRY(clear_page_slow) mov r4,r5 - mov.w .Llimit,r0 + mov.l .Llimit,r0 add r0,r5 mov #0,r0 ! @@ -50,7 +50,7 @@ ENTRY(clear_page_slow) ! rts nop -.Llimit: .word (4096-28) +.Llimit: .long (PAGE_SIZE-28) ENTRY(__clear_user) ! @@ -164,10 +164,10 @@ ENTRY(__clear_user) * r0 --- scratch * r4 --- to * r5 --- orig_to - * r6 --- to + 4096 + * r6 --- to + PAGE_SIZE */ ENTRY(__clear_user_page) - mov.w .L4096,r0 + mov.l .Lpsz,r0 mov r4,r6 add r0,r6 mov #0,r0 @@ -191,7 +191,7 @@ ENTRY(__clear_user_page) ! rts nop -.L4096: .word 4096 +.Lpsz: .long PAGE_SIZE #endif diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 1addffe117c3..397c94c97315 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -1,12 +1,12 @@ -/* $Id: copy_page.S,v 1.8 2003/08/25 17:03:10 lethal Exp $ - * +/* * copy_page, __copy_user_page, __copy_user implementation of SuperH * * Copyright (C) 2001 Niibe Yutaka & Kaz Kojima * Copyright (C) 2002 Toshinobu Sugioka - * + * Copyright (C) 2006 Paul Mundt */ #include <linux/linkage.h> +#include <asm/page.h> /* * copy_page_slow @@ -18,7 +18,7 @@ /* * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + 4096 + * r8 --- from + PAGE_SIZE * r9 --- not used * r10 --- to * r11 --- from @@ -30,7 +30,7 @@ ENTRY(copy_page_slow) mov r4,r10 mov r5,r11 mov r5,r8 - mov.w .L4096,r0 + mov.l .Lpsz,r0 add r0,r8 ! 1: mov.l @r11+,r0 @@ -80,7 +80,7 @@ ENTRY(copy_page_slow) /* * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + 4096 + * r8 --- from + PAGE_SIZE * r9 --- orig_to * r10 --- to * r11 --- from @@ -94,7 +94,7 @@ ENTRY(__copy_user_page) mov r5,r11 mov r6,r9 mov r5,r8 - mov.w .L4096,r0 + mov.l .Lpsz,r0 add r0,r8 ! 1: ocbi @r9 @@ -129,7 +129,7 @@ ENTRY(__copy_user_page) rts nop #endif -.L4096: .word 4096 +.Lpsz: .long PAGE_SIZE /* * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); * Return the number of bytes NOT copied diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 68663b8f99ae..716ebf568af2 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -26,13 +26,19 @@ extern void die(const char *,struct pt_regs *,long); * and the problem, and then passes it off to one of the appropriate * routines. */ -asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, - unsigned long address) +asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) { struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct * vma; unsigned long page; + int si_code; + siginfo_t info; + + trace_hardirqs_on(); + local_irq_enable(); #ifdef CONFIG_SH_KGDB if (kgdb_nofault && kgdb_bus_err_hook) @@ -41,6 +47,46 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, tsk = current; mm = tsk->mm; + si_code = SEGV_MAPERR; + + if (unlikely(address >= TASK_SIZE)) { + /* + * Synchronize this task's top level page-table + * with the 'reference' page table. + * + * Do _not_ use "tsk" here. We might be inside + * an interrupt in the middle of a task switch.. + */ + int offset = pgd_index(address); + pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; + pmd_t *pmd, *pmd_k; + + pgd = get_TTB() + offset; + pgd_k = swapper_pg_dir + offset; + + /* This will never happen with the folded page table. */ + if (!pgd_present(*pgd)) { + if (!pgd_present(*pgd_k)) + goto bad_area_nosemaphore; + set_pgd(pgd, *pgd_k); + return; + } + + pud = pud_offset(pgd, address); + pud_k = pud_offset(pgd_k, address); + if (pud_present(*pud) || !pud_present(*pud_k)) + goto bad_area_nosemaphore; + set_pud(pud, *pud_k); + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); + if (pmd_present(*pmd) || !pmd_present(*pmd_k)) + goto bad_area_nosemaphore; + set_pmd(pmd, *pmd_k); + + return; + } /* * If we're in an interrupt or have no user @@ -65,6 +111,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, * we can handle it.. */ good_area: + si_code = SEGV_ACCERR; if (writeaccess) { if (!(vma->vm_flags & VM_WRITE)) goto bad_area; @@ -104,10 +151,13 @@ survive: bad_area: up_read(&mm->mmap_sem); +bad_area_nosemaphore: if (user_mode(regs)) { - tsk->thread.address = address; - tsk->thread.error_code = writeaccess; - force_sig(SIGSEGV, tsk); + info.si_signo = SIGSEGV; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void *) address; + force_sig_info(SIGSEGV, &info, tsk); return; } @@ -127,11 +177,9 @@ no_context: printk(KERN_ALERT "Unable to handle kernel paging request"); printk(" at virtual address %08lx\n", address); printk(KERN_ALERT "pc = %08lx\n", regs->pc); - asm volatile("mov.l %1, %0" - : "=r" (page) - : "m" (__m(MMU_TTB))); + page = (unsigned long)get_TTB(); if (page) { - page = ((unsigned long *) page)[address >> 22]; + page = ((unsigned long *) page)[address >> PGDIR_SHIFT]; printk(KERN_ALERT "*pde = %08lx\n", page); if (page & _PAGE_PRESENT) { page &= PAGE_MASK; @@ -166,98 +214,13 @@ do_sigbus: * Send a sigbus, regardless of whether we were in kernel * or user mode. */ - tsk->thread.address = address; - tsk->thread.error_code = writeaccess; - tsk->thread.trap_no = 14; - force_sig(SIGBUS, tsk); + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRERR; + info.si_addr = (void *)address; + force_sig_info(SIGBUS, &info, tsk); /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) goto no_context; } - -#ifdef CONFIG_SH_STORE_QUEUES -/* - * This is a special case for the SH-4 store queues, as pages for this - * space still need to be faulted in before it's possible to flush the - * store queue cache for writeout to the remapped region. - */ -#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) -#else -#define P3_ADDR_MAX P4SEG -#endif - -/* - * Called with interrupts disabled. - */ -asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, - unsigned long writeaccess, - unsigned long address) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - pte_t entry; - struct mm_struct *mm = current->mm; - spinlock_t *ptl; - int ret = 1; - -#ifdef CONFIG_SH_KGDB - if (kgdb_nofault && kgdb_bus_err_hook) - kgdb_bus_err_hook(); -#endif - - /* - * We don't take page faults for P1, P2, and parts of P4, these - * are always mapped, whether it be due to legacy behaviour in - * 29-bit mode, or due to PMB configuration in 32-bit mode. - */ - if (address >= P3SEG && address < P3_ADDR_MAX) { - pgd = pgd_offset_k(address); - mm = NULL; - } else { - if (unlikely(address >= TASK_SIZE || !mm)) - return 1; - - pgd = pgd_offset(mm, address); - } - - pud = pud_offset(pgd, address); - if (pud_none_or_clear_bad(pud)) - return 1; - pmd = pmd_offset(pud, address); - if (pmd_none_or_clear_bad(pmd)) - return 1; - - if (mm) - pte = pte_offset_map_lock(mm, pmd, address, &ptl); - else - pte = pte_offset_kernel(pmd, address); - - entry = *pte; - if (unlikely(pte_none(entry) || pte_not_present(entry))) - goto unlock; - if (unlikely(writeaccess && !pte_write(entry))) - goto unlock; - - if (writeaccess) - entry = pte_mkdirty(entry); - entry = pte_mkyoung(entry); - -#ifdef CONFIG_CPU_SH4 - /* - * ITLB is not affected by "ldtlb" instruction. - * So, we need to flush the entry by ourselves. - */ - __flush_tlb_page(get_asid(), address & PAGE_MASK); -#endif - - set_pte(pte, entry); - update_mmu_cache(NULL, address, entry); - ret = 0; -unlock: - if (mm) - pte_unmap_unlock(pte, ptl); - return ret; -} diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 7154d1ce9785..59f4cc18235b 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -84,30 +84,22 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) pmd_t *pmd; pte_t *pte; - pgd = swapper_pg_dir + pgd_index(addr); + pgd = pgd_offset_k(addr); if (pgd_none(*pgd)) { pgd_ERROR(*pgd); return; } - pud = pud_offset(pgd, addr); - if (pud_none(*pud)) { - pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC); - set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER)); - if (pmd != pmd_offset(pud, 0)) { - pud_ERROR(*pud); - return; - } + pud = pud_alloc(NULL, pgd, addr); + if (unlikely(!pud)) { + pud_ERROR(*pud); + return; } - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) { - pte = (pte_t *)get_zeroed_page(GFP_ATOMIC); - set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER)); - if (pte != pte_offset_kernel(pmd, 0)) { - pmd_ERROR(*pmd); - return; - } + pmd = pmd_alloc(NULL, pud, addr); + if (unlikely(!pmd)) { + pmd_ERROR(*pmd); + return; } pte = pte_offset_kernel(pmd, addr); @@ -155,9 +147,6 @@ extern char __init_begin, __init_end; /* * paging_init() sets up the page tables - * - * This routines also unmaps the page at virtual kernel address 0, so - * that we can trap those pesky NULL-reference errors in the kernel. */ void __init paging_init(void) { @@ -180,14 +169,11 @@ void __init paging_init(void) */ { unsigned long max_dma, low, start_pfn; - pgd_t *pg_dir; - int i; - - /* We don't need kernel mapping as hardware support that. */ - pg_dir = swapper_pg_dir; - for (i = 0; i < PTRS_PER_PGD; i++) - pgd_val(pg_dir[i]) = 0; + /* We don't need to map the kernel through the TLB, as + * it is permanatly mapped using P1. So clear the + * entire pgd. */ + memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir)); /* Turn on the MMU */ enable_mmu(); @@ -206,6 +192,10 @@ void __init paging_init(void) } } + /* Set an initial value for the MMU.TTB so we don't have to + * check for a null value. */ + set_TTB(swapper_pg_dir); + #elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) /* * If we don't have CONFIG_MMU set and the processor in question @@ -227,7 +217,6 @@ static struct kcore_list kcore_mem, kcore_vmalloc; void __init mem_init(void) { - extern unsigned long empty_zero_page[1024]; int codesize, reservedpages, datasize, initsize; int tmp; extern unsigned long memory_start; diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index a9fe80cfc233..11d54c149821 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -28,9 +28,7 @@ static inline void remap_area_pte(pte_t * pte, unsigned long address, { unsigned long end; unsigned long pfn; - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | - _PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | flags); + pgprot_t pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags); address &= ~PMD_MASK; end = address + size; diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c index 1406d2e348ca..bb23679369d6 100644 --- a/arch/sh/mm/pg-dma.c +++ b/arch/sh/mm/pg-dma.c @@ -39,8 +39,6 @@ static void copy_page_dma(void *to, void *from) static void clear_page_dma(void *to) { - extern unsigned long empty_zero_page[1024]; - /* * We get invoked quite early on, if the DMAC hasn't been initialized * yet, fall back on the slow manual implementation. diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 07371ed7a313..3f98d2a4f936 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -6,22 +6,12 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include <linux/init.h> -#include <linux/mman.h> #include <linux/mm.h> -#include <linux/threads.h> -#include <asm/addrspace.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pgalloc.h> +#include <linux/mutex.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> -extern struct semaphore p3map_sem[]; +extern struct mutex p3map_mutex[]; #define CACHE_ALIAS (cpu_data->dcache.alias_mask) @@ -37,10 +27,6 @@ void clear_user_page(void *to, unsigned long address, struct page *page) if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) clear_page(to); else { - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | - _PAGE_RW | _PAGE_CACHABLE | - _PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); unsigned long phys_addr = PHYSADDR(to); unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); pgd_t *pgd = pgd_offset_k(p3_addr); @@ -50,8 +36,8 @@ void clear_user_page(void *to, unsigned long address, struct page *page) pte_t entry; unsigned long flags; - entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot); - down(&p3map_sem[(address & CACHE_ALIAS)>>12]); + entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL); + mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); __flush_tlb_page(get_asid(), p3_addr); @@ -59,7 +45,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) update_mmu_cache(NULL, p3_addr, entry); __clear_user_page((void *)p3_addr, to); pte_clear(&init_mm, p3_addr, pte); - up(&p3map_sem[(address & CACHE_ALIAS)>>12]); + mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } @@ -77,10 +63,6 @@ void copy_user_page(void *to, void *from, unsigned long address, if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) copy_page(to, from); else { - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | - _PAGE_RW | _PAGE_CACHABLE | - _PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); unsigned long phys_addr = PHYSADDR(to); unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); pgd_t *pgd = pgd_offset_k(p3_addr); @@ -90,8 +72,8 @@ void copy_user_page(void *to, void *from, unsigned long address, pte_t entry; unsigned long flags; - entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot); - down(&p3map_sem[(address & CACHE_ALIAS)>>12]); + entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL); + mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); __flush_tlb_page(get_asid(), p3_addr); @@ -99,7 +81,7 @@ void copy_user_page(void *to, void *from, unsigned long address, update_mmu_cache(NULL, p3_addr, entry); __copy_user_page((void *)p3_addr, from, to); pte_clear(&init_mm, p3_addr, pte); - up(&p3map_sem[(address & CACHE_ALIAS)>>12]); + mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } @@ -122,4 +104,3 @@ inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t } return pte; } - diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index ac57638977ee..0571755e9a84 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -30,3 +30,5 @@ R7780MP SH_R7780MP TITAN SH_TITAN SHMIN SH_SHMIN 7710VOIPGW SH_7710VOIPGW +7206SE SH_7206_SOLUTION_ENGINE +7619SE SH_7619_SOLUTION_ENGINE diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 3576b3cc505e..7d4190e55654 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -638,7 +638,7 @@ int chan_out_fd(struct list_head *chans) return -1; } -void chan_interrupt(struct list_head *chans, struct work_struct *task, +void chan_interrupt(struct list_head *chans, struct delayed_work *task, struct tty_struct *tty, int irq) { struct list_head *ele, *next; diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 7b172160fe04..96f0189327af 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -56,7 +56,7 @@ static struct notifier_block reboot_notifier = { static LIST_HEAD(mc_requests); -static void mc_work_proc(void *unused) +static void mc_work_proc(struct work_struct *unused) { struct mconsole_entry *req; unsigned long flags; @@ -72,7 +72,7 @@ static void mc_work_proc(void *unused) } } -static DECLARE_WORK(mconsole_work, mc_work_proc, NULL); +static DECLARE_WORK(mconsole_work, mc_work_proc); static irqreturn_t mconsole_interrupt(int irq, void *dev_id) { diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index ec9eb8bd9432..286bc0b3207f 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -99,6 +99,7 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id) * same device, since it tests for (dev->flags & IFF_UP). So * there's no harm in delaying the device shutdown. */ schedule_work(&close_work); +#error this is not permitted - close_work will go out of scope goto out; } reactivate_fd(lp->fd, UM_ETH_IRQ); diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index ce9f3733f73e..6dfe632f1c14 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -132,7 +132,7 @@ static int port_accept(struct port_list *port) DECLARE_MUTEX(ports_sem); struct list_head ports = LIST_HEAD_INIT(ports); -void port_work_proc(void *unused) +void port_work_proc(struct work_struct *unused) { struct port_list *port; struct list_head *ele; @@ -150,7 +150,7 @@ void port_work_proc(void *unused) local_irq_restore(flags); } -DECLARE_WORK(port_work, port_work_proc, NULL); +DECLARE_WORK(port_work, port_work_proc); static irqreturn_t port_interrupt(int irq, void *data) { diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index bbea88801d88..c7587fc39015 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -306,8 +306,8 @@ void mce_log_therm_throt_event(unsigned int cpu, __u64 status) */ static int check_interval = 5 * 60; /* 5 minutes */ -static void mcheck_timer(void *data); -static DECLARE_WORK(mcheck_work, mcheck_timer, NULL); +static void mcheck_timer(struct work_struct *work); +static DECLARE_DELAYED_WORK(mcheck_work, mcheck_timer); static void mcheck_check_cpu(void *info) { @@ -315,7 +315,7 @@ static void mcheck_check_cpu(void *info) do_machine_check(NULL, 0); } -static void mcheck_timer(void *data) +static void mcheck_timer(struct work_struct *work) { on_each_cpu(mcheck_check_cpu, NULL, 1, 1); schedule_delayed_work(&mcheck_work, check_interval * HZ); diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 62c2e747af58..9800147c4c68 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -753,14 +753,16 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta } struct create_idle { + struct work_struct work; struct task_struct *idle; struct completion done; int cpu; }; -void do_fork_idle(void *_c_idle) +void do_fork_idle(struct work_struct *work) { - struct create_idle *c_idle = _c_idle; + struct create_idle *c_idle = + container_of(work, struct create_idle, work); c_idle->idle = fork_idle(c_idle->cpu); complete(&c_idle->done); @@ -775,10 +777,10 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid) int timeout; unsigned long start_rip; struct create_idle c_idle = { + .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle), .cpu = cpu, .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), }; - DECLARE_WORK(work, do_fork_idle, &c_idle); /* allocate memory for gdts of secondary cpus. Hotplug is considered */ if (!cpu_gdt_descr[cpu].address && @@ -825,9 +827,9 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid) * thread. */ if (!keventd_up() || current_is_keventd()) - work.func(work.data); + c_idle.work.func(&c_idle.work); else { - schedule_work(&work); + schedule_work(&c_idle.work); wait_for_completion(&c_idle.done); } diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index e3ef544d2cfb..9f05bc9b2dad 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -563,7 +563,7 @@ static unsigned int cpufreq_delayed_issched = 0; static unsigned int cpufreq_init = 0; static struct work_struct cpufreq_delayed_get_work; -static void handle_cpufreq_delayed_get(void *v) +static void handle_cpufreq_delayed_get(struct work_struct *v) { unsigned int cpu; for_each_online_cpu(cpu) { @@ -639,7 +639,7 @@ static struct notifier_block time_cpufreq_notifier_block = { static int __init cpufreq_tsc(void) { - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); if (!cpufreq_register_notifier(&time_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER)) cpufreq_init = 1; |