diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-omap2/board-2430sdp.c | 23 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-apollon.c | 60 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 111 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/memory.c | 26 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/mux.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prcm-regs.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/prcm.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/sleep.S | 23 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/sram-fn.S | 42 | ||||
| -rw-r--r-- | arch/arm/plat-omap/common.c | 47 |
11 files changed, 282 insertions, 100 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 64235dee5614..1c12d7c6c7fc 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -33,7 +33,6 @@ #include <asm/arch/board.h> #include <asm/arch/common.h> #include <asm/arch/gpmc.h> -#include "prcm-regs.h" #include <asm/io.h> @@ -125,15 +124,18 @@ static inline void __init sdp2430_init_smc91x(void) int eth_cs; unsigned long cs_mem_base; unsigned int rate; - struct clk *l3ck; + struct clk *gpmc_fck; eth_cs = SDP2430_SMC91X_CS; - l3ck = clk_get(NULL, "core_l3_ck"); - if (IS_ERR(l3ck)) - rate = 100000000; - else - rate = clk_get_rate(l3ck); + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) { + WARN_ON(1); + return; + } + + clk_enable(gpmc_fck); + rate = clk_get_rate(gpmc_fck); /* Make sure CS1 timings are correct, for 2430 always muxed */ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); @@ -160,7 +162,7 @@ static inline void __init sdp2430_init_smc91x(void) if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; + goto out; } sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; @@ -171,10 +173,13 @@ static inline void __init sdp2430_init_smc91x(void) printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", OMAP24XX_ETHR_GPIO_IRQ); gpmc_cs_free(eth_cs); - return; + goto out; } omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +out: + clk_disable(gpmc_fck); + clk_put(gpmc_fck); } static void __init omap_2430sdp_init_irq(void) diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 7846551f0575..a1e1e6765b5b 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,8 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/leds.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -39,7 +41,7 @@ #include <asm/arch/board.h> #include <asm/arch/common.h> #include <asm/arch/gpmc.h> -#include "prcm-regs.h" +#include <asm/arch/control.h> /* LED & Switch macros */ #define LED0_GPIO13 13 @@ -187,17 +189,47 @@ static inline void __init apollon_init_smc91x(void) { unsigned long base; + unsigned int rate; + struct clk *gpmc_fck; + int eth_cs; + + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) { + WARN_ON(1); + return; + } + + clk_enable(gpmc_fck); + rate = clk_get_rate(gpmc_fck); + + eth_cs = APOLLON_ETH_CS; + /* Make sure CS1 timings are correct */ - GPMC_CONFIG1_1 = 0x00011203; - GPMC_CONFIG2_1 = 0x001f1f01; - GPMC_CONFIG3_1 = 0x00080803; - GPMC_CONFIG4_1 = 0x1c091c09; - GPMC_CONFIG5_1 = 0x041f1f1f; - GPMC_CONFIG6_1 = 0x000004c4; + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); + + if (rate >= 160000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else if (rate >= 130000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else {/* rate = 100000000 */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); + } if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); - return; + goto out; } apollon_smc91x_resources[0].start = base + 0x300; apollon_smc91x_resources[0].end = base + 0x30f; @@ -208,9 +240,13 @@ static inline void __init apollon_init_smc91x(void) printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - return; + goto out; } omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); + +out: + clk_disable(gpmc_fck); + clk_put(gpmc_fck); } static void __init omap_apollon_init_irq(void) @@ -330,6 +366,8 @@ static void __init apollon_usb_init(void) static void __init omap_apollon_init(void) { + u32 v; + apollon_led_init(); apollon_sw_init(); apollon_flash_init(); @@ -339,7 +377,9 @@ static void __init omap_apollon_init(void) omap_cfg_reg(W19_24XX_SYS_NIRQ); /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ - CONTROL_DEVCONF |= (1 << 24); + v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); /* * Make sure the serial ports are muxed on at this point. diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index f125f432cc3e..d1915f99a5fa 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -19,6 +19,8 @@ #include <linux/delay.h> #include <linux/workqueue.h> #include <linux/input.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -26,6 +28,7 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <asm/arch/control.h> #include <asm/arch/gpio.h> #include <asm/arch/gpioexpander.h> #include <asm/arch/mux.h> @@ -36,10 +39,13 @@ #include <asm/arch/keypad.h> #include <asm/arch/menelaus.h> #include <asm/arch/dma.h> -#include "prcm-regs.h" +#include <asm/arch/gpmc.h> #include <asm/io.h> +#define H4_FLASH_CS 0 +#define H4_SMC91X_CS 1 + static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; @@ -116,8 +122,6 @@ static struct flash_platform_data h4_flash_data = { }; static struct resource h4_flash_resource = { - .start = H4_CS0_BASE, - .end = H4_CS0_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; @@ -253,21 +257,107 @@ static struct platform_device *h4_devices[] __initdata = { &h4_lcd_device, }; +/* 2420 Sysboot setup (2430 is different) */ +static u32 get_sysboot_value(void) +{ + return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) & + (OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK | + OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK | + OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK)); +} + +/* H4-2420's always used muxed mode, H4-2422's always use non-muxed + * + * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423 + * correctly. The macro needs to look at production_id not just hawkeye. + */ +static u32 is_gpmc_muxed(void) +{ + u32 mux; + mux = get_sysboot_value(); + if ((mux & 0xF) == 0xd) + return 1; /* NAND config (could be either) */ + if (mux & 0x2) /* if mux'ed */ + return 1; + else + return 0; +} + static inline void __init h4_init_debug(void) { + int eth_cs; + unsigned long cs_mem_base; + unsigned int muxed, rate; + struct clk *gpmc_fck; + + eth_cs = H4_SMC91X_CS; + + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) { + WARN_ON(1); + return; + } + + clk_enable(gpmc_fck); + rate = clk_get_rate(gpmc_fck); + clk_disable(gpmc_fck); + clk_put(gpmc_fck); + + if (is_gpmc_muxed()) + muxed = 0x200; + else + muxed = 0; + /* Make sure CS1 timings are correct */ - GPMC_CONFIG1_1 = 0x00011200; - GPMC_CONFIG2_1 = 0x001f1f01; - GPMC_CONFIG3_1 = 0x00080803; - GPMC_CONFIG4_1 = 0x1c091c09; - GPMC_CONFIG5_1 = 0x041f1f1f; - GPMC_CONFIG6_1 = 0x000004c4; - GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, + 0x00011000 | muxed); + + if (rate >= 160000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else if (rate >= 130000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else {/* rate = 100000000 */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); + } + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + goto out; + } + udelay(100); omap_cfg_reg(M15_24XX_GPIO92); if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0) gpmc_cs_free(eth_cs); + +out: + clk_disable(gpmc_fck); + clk_put(gpmc_fck); +} + +static void __init h4_init_flash(void) +{ + unsigned long base; + + if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) { + printk("Can't request GPMC CS for flash\n"); + return; + } + h4_flash_resource.start = base; + h4_flash_resource.end = base + SZ_64M - 1; } static void __init omap_h4_init_irq(void) @@ -275,6 +365,7 @@ static void __init omap_h4_init_irq(void) omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); + h4_init_flash(); } static struct omap_uart_config h4_uart_config __initdata = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5a4cc2076a7d..02cede295e89 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -69,7 +69,7 @@ static void __iomem *gpmc_base = static void __iomem *gpmc_cs_base = (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0; -static struct clk *gpmc_l3_clk; +static struct clk *gpmc_fck; static void gpmc_write_reg(int idx, u32 val) { @@ -94,11 +94,10 @@ u32 gpmc_cs_read_reg(int cs, int idx) return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx); } -/* TODO: Add support for gpmc_fck to clock framework and use it */ unsigned long gpmc_get_fclk_period(void) { /* In picoseconds */ - return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000); + return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000); } unsigned int gpmc_ns_to_ticks(unsigned int time_ns) @@ -398,8 +397,11 @@ void __init gpmc_init(void) { u32 l; - gpmc_l3_clk = clk_get(NULL, "core_l3_ck"); - BUG_ON(IS_ERR(gpmc_l3_clk)); + gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ + if (IS_ERR(gpmc_fck)) + WARN_ON(1); + else + clk_enable(gpmc_fck); l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 3e5d8cd4ea4f..b56c1a082d92 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -27,11 +27,16 @@ #include <asm/arch/clock.h> #include <asm/arch/sram.h> -#include "prcm-regs.h" +#include "prm.h" + #include "memory.h" +#include "sdrc.h" +unsigned long omap2_sdrc_base; +unsigned long omap2_sms_base; static struct memory_timings mem_timings; +static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2; u32 omap2_memory_get_slow_dll_ctrl(void) { @@ -53,7 +58,7 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) unsigned long dll_cnt; u32 fast_dll = 0; - mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. * In the case of 2422, its ok to use CS1 instead of CS0. @@ -73,11 +78,11 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) mem_timings.dll_mode = M_LOCK; if (mem_timings.base_cs == 0) { - fast_dll = SDRC_DLLA_CTRL; - dll_cnt = SDRC_DLLA_STATUS & 0xff00; + fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL); + dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00; } else { - fast_dll = SDRC_DLLB_CTRL; - dll_cnt = SDRC_DLLB_STATUS & 0xff00; + fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL); + dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00; } if (force_lock_to_unlock_mode) { fast_dll &= ~0xff00; @@ -106,14 +111,13 @@ void __init omap2_init_memory(void) { u32 l; - l = SMS_SYSCONFIG; + l = sms_read_reg(SMS_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); - SMS_SYSCONFIG = l; + sms_write_reg(l, SMS_SYSCONFIG); - l = SDRC_SYSCONFIG; + l = sdrc_read_reg(SDRC_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); - SDRC_SYSCONFIG = l; - + sdrc_write_reg(l, SDRC_SYSCONFIG); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 0cf7562ff88f..930770012a75 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -29,6 +29,7 @@ #include <asm/io.h> #include <linux/spinlock.h> +#include <asm/arch/control.h> #include <asm/arch/mux.h> #ifdef CONFIG_OMAP_MUX @@ -218,18 +219,16 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1) #define OMAP24XX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP24XX */ -#define OMAP24XX_L4_BASE 0x48000000 #define OMAP24XX_PULL_ENA (1 << 3) #define OMAP24XX_PULL_UP (1 << 4) -/* REVISIT: Convert this code to use ctrl_{read,write}_reg */ #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg) { u16 orig; u8 warn = 0, debug = 0; - orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg); + orig = omap_ctrl_readb(cfg->mux_reg); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -238,7 +237,8 @@ void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg) if (debug || warn) printk(KERN_WARNING "MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n", - cfg->name, omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg)); + cfg->name, omap_ctrl_base_get() + cfg->mux_reg, + orig, reg); } #else #define omap2_cfg_debug(x, y) do {} while (0) @@ -258,7 +258,7 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) if (cfg->pu_pd_val) reg |= OMAP24XX_PULL_UP; omap2_cfg_debug(cfg, reg); - omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg); + omap_ctrl_writeb(reg, cfg->mux_reg); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h index 5e1c4b53ee9d..c7f6cfa0b485 100644 --- a/arch/arm/mach-omap2/prcm-regs.h +++ b/arch/arm/mach-omap2/prcm-regs.h @@ -23,6 +23,20 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H #define __ARCH_ARM_MACH_OMAP2_PRCM_H +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) +#define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000) +#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +#define OMAP24XX_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) +#define OMAP24XX_PRCM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP24XX_SDRC_BASE (0x6D000000) +#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) +#endif + /* SET_PERFORMANCE_LEVEL PARAMETERS */ #define PRCM_HALF_SPEED 1 #define PRCM_FULL_SPEED 2 diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 90f530540c65..b12f423b8595 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,19 +17,27 @@ #include <linux/init.h> #include <linux/clk.h> -#include "prcm-regs.h" +#include <asm/io.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" extern void omap2_clk_prepare_for_reboot(void); u32 omap_prcm_get_reset_sources(void) { - return RM_RSTST_WKUP & 0x7f; + return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f; } EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ void omap_prcm_arch_reset(char mode) { + u32 wkup; omap2_clk_prepare_for_reboot(); - RM_RSTCTRL_WKUP |= 2; + + if (cpu_is_omap24xx()) { + wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3; + prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL); + } } diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S index 16247d557853..46ccb9b8b583 100644 --- a/arch/arm/mach-omap2/sleep.S +++ b/arch/arm/mach-omap2/sleep.S @@ -26,19 +26,10 @@ #include <asm/arch/io.h> #include <asm/arch/pm.h> -#define A_32KSYNC_CR_V IO_ADDRESS(OMAP_TIMER32K_BASE+0x10) -#define A_PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50) -#define A_PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80) -#define A_CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500) -#define A_CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520) -#define A_CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540) -#define A_CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544) +#include "sdrc.h" -#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60) -#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70) -#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4) +/* First address of reserved address space? apparently valid for OMAP2 & 3 */ #define A_SDRC0_V (0xC0000000) -#define A_SDRC_MANUAL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8) .text @@ -126,17 +117,11 @@ loop2: ldmfd sp!, {r0 - r12, pc} @ restore regs and return A_SDRC_POWER: - .word A_SDRC_POWER_V + .word OMAP242X_SDRC_REGADDR(SDRC_POWER) A_SDRC0: .word A_SDRC0_V -A_CM_CLKSEL2_PLL_S: - .word A_CM_CLKSEL2_PLL_V -A_CM_CLKEN_PLL: - .word A_CM_CLKEN_PLL_V A_SDRC_DLLA_CTRL_S: - .word A_SDRC_DLLA_CTRL_V -A_SDRC_MANUAL_S: - .word A_SDRC_MANUAL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ENTRY(omap24xx_cpu_suspend_sz) .word . - omap24xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S index b27576690f8d..4a9e49140716 100644 --- a/arch/arm/mach-omap2/sram-fn.S +++ b/arch/arm/mach-omap2/sram-fn.S @@ -27,19 +27,11 @@ #include <asm/arch/io.h> #include <asm/hardware.h> -#include "prcm-regs.h" +#include "sdrc.h" +#include "prm.h" +#include "cm.h" -#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) - -#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544) -#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050) -#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080) -#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500) -#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520) -#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540) - -#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060) -#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4) +#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) .text @@ -131,11 +123,11 @@ volt_delay: /* relative load constants */ cm_clksel2_pll: - .word CM_CLKSEL2_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) prcm_voltctrl: - .word PRCM_VOLTCTRL_V + .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50) prcm_mask_val: .word 0xFFFF3FFC timer_32ksynct_cr: @@ -225,13 +217,13 @@ volt_delay_c: mov pc, lr @ back to caller ddr_cm_clksel2_pll: - .word CM_CLKSEL2_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) ddr_sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ddr_sdrc_rfr_ctrl: - .word SDRC_RFR_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) ddr_prcm_voltctrl: - .word PRCM_VOLTCTRL_V + .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50) ddr_prcm_mask_val: .word 0xFFFF3FFC ddr_timer_32ksynct: @@ -316,17 +308,17 @@ wait_dll_lock: ldmfd sp!, {r0-r12, pc} @ restore regs and return set_config: - .word PRCM_CLKCFG_CTRL_V + .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80) pll_ctl: - .word CM_CLKEN_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1) pll_stat: - .word CM_IDLEST_CKGEN_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1) pll_div: - .word CM_CLKSEL1_PLL_V + .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL) sdrc_rfr: - .word SDRC_RFR_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0) dlla_ctrl: - .word SDRC_DLLA_CTRL_V + .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ENTRY(sram_set_prcm_sz) .word . - sram_set_prcm diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 7f1cae16cfad..bd1cef2c3c14 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -27,11 +27,16 @@ #include <asm/setup.h> #include <asm/arch/board.h> +#include <asm/arch/control.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/clock.h> +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +# include "../mach-omap2/sdrc.h" +#endif + #define NO_LENGTH_CHECK 0xffffffff unsigned char omap_bootloader_tag[512]; @@ -171,8 +176,8 @@ console_initcall(omap_add_serial_console); #if defined(CONFIG_ARCH_OMAP16XX) #define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#elif defined(CONFIG_ARCH_OMAP24XX) -#define TIMER_32K_SYNCHRONIZED (OMAP24XX_32KSYNCT_BASE + 0x10) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10) #endif #ifdef TIMER_32K_SYNCHRONIZED @@ -215,7 +220,13 @@ static int __init omap_init_clocksource_32k(void) static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { + struct clk *sync_32k_ick; + + sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); + if (sync_32k_ick) + clk_enable(sync_32k_ick); + clocksource_32k.mult = clocksource_hz2mult(32768, clocksource_32k.shift); @@ -227,3 +238,33 @@ static int __init omap_init_clocksource_32k(void) arch_initcall(omap_init_clocksource_32k); #endif /* TIMER_32K_SYNCHRONIZED */ + +/* Global address base setup code */ + +#if defined(CONFIG_ARCH_OMAP2420) +void __init omap2_set_globals_242x(void) +{ + omap2_sdrc_base = OMAP2420_SDRC_BASE; + omap2_sms_base = OMAP2420_SMS_BASE; + omap_ctrl_base_set(OMAP2420_CTRL_BASE); +} +#endif + +#if defined(CONFIG_ARCH_OMAP2430) +void __init omap2_set_globals_243x(void) +{ + omap2_sdrc_base = OMAP243X_SDRC_BASE; + omap2_sms_base = OMAP243X_SMS_BASE; + omap_ctrl_base_set(OMAP243X_CTRL_BASE); +} +#endif + +#if defined(CONFIG_ARCH_OMAP3430) +void __init omap2_set_globals_343x(void) +{ + omap2_sdrc_base = OMAP343X_SDRC_BASE; + omap2_sms_base = OMAP343X_SMS_BASE; + omap_ctrl_base_set(OMAP343X_CTRL_BASE); +} +#endif + |