diff options
Diffstat (limited to 'arch')
104 files changed, 7146 insertions, 1128 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 967ecf92d6a7..f4e25c648fbb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -300,6 +300,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select GENERIC_TBSYNC default y config PPC_PREP @@ -314,15 +315,17 @@ config PPC_MAPLE bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. For more informations, refer to <http://www.970eval.com> -config PPC_BPA - bool " Broadband Processor Architecture" +config PPC_CELL + bool " Cell Broadband Processor Architecture" depends on PPC_MULTIPLATFORM && PPC64 select PPC_RTAS + select MMIO_NVRAM config PPC_OF bool @@ -353,13 +356,26 @@ config RTAS_ERROR_LOGGING depends on PPC_RTAS default n +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config MMIO_NVRAM + bool + default n + config MPIC_BROKEN_U3 bool depends on PPC_MAPLE default y -config BPA_IIC - depends on PPC_BPA +config CELL_IIC + depends on PPC_CELL bool default y @@ -372,6 +388,11 @@ config PPC_MPC106 bool default n +config GENERIC_TBSYNC + bool + default y if CONFIG_PPC32 && CONFIG_SMP + default n + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 2f4cce06a7e5..5bc11bd36c1f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -12,9 +12,6 @@ # Rewritten by Cort Dougan and Paul Mackerras # -# This must match PAGE_OFFSET in include/asm-powerpc/page.h. -KERNELLOAD := $(CONFIG_KERNEL_START) - HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(CONFIG_PPC64),y) @@ -59,7 +56,7 @@ override LD += -m elf$(SZ)ppc override CC += -m$(SZ) endif -LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD) +LDFLAGS_vmlinux := -Bstatic # The -Iarch/$(ARCH)/include is temporary while we are merging CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig new file mode 100644 index 000000000000..67ffecbc05cb --- /dev/null +++ b/arch/powerpc/configs/cell_defconfig @@ -0,0 +1,1024 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:29:10 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +CONFIG_PPC_BPA=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_BPA_IIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +# CONFIG_IOMMU_VMERGE is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=y +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +CONFIG_SKGE=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_SPIDER_NET is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_WATCHDOG_RTAS=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig new file mode 100644 index 000000000000..6323065fbf2c --- /dev/null +++ b/arch/powerpc/configs/g5_defconfig @@ -0,0 +1,1392 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:23 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +CONFIG_PPC_PMAC=y +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_PPC_PMAC64=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_HOTPLUG_CPU is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +CONFIG_SCSI_SATA_SVW=y +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +CONFIG_IEEE1394_OUI_DB=y +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y +CONFIG_THERM_PM72=y + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +CONFIG_FB_RIVA=y +# CONFIG_FB_RIVA_I2C is not set +# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig new file mode 100644 index 000000000000..62e92c7e9e27 --- /dev/null +++ b/arch/powerpc/configs/iseries_defconfig @@ -0,0 +1,998 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:56 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +CONFIG_PPC_ISERIES=y +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_IBMVIO=y +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=m +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_ISERIES_VETH=y +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=m +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# iSeries device drivers +# +CONFIG_VIOCONS=y +CONFIG_VIODASD=y +CONFIG_VIOCD=m +CONFIG_VIOTAPE=m +CONFIG_VIOPATH=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig new file mode 100644 index 000000000000..7b480f3d1406 --- /dev/null +++ b/arch/powerpc/configs/maple_defconfig @@ -0,0 +1,1062 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:31:24 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +CONFIG_PPC_MAPLE=y +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +# CONFIG_ALTIVEC is not set +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_MPIC_BROKEN_U3=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_IDE_TASK_IOCTL=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +CONFIG_AMD8111_ETH=y +# CONFIG_AMD8111E_NAPI is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +CONFIG_USB_SERIAL_TI=m +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig new file mode 100644 index 000000000000..9f09dff9e11a --- /dev/null +++ b/arch/powerpc/configs/pseries_defconfig @@ -0,0 +1,1371 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:32:17 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_PPC_PSERIES=y +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_PPC_SPLPAR=y +CONFIG_KEXEC=y +CONFIG_IBMVIO=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA=y +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_EEH=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_RPA=m +CONFIG_HOTPLUG_PCI_RPA_DLPAR=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +CONFIG_BLK_DEV_FD=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=y +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +# CONFIG_2BUFF_MODE is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set +CONFIG_HVC_CONSOLE=y +CONFIG_HVCS=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +# CONFIG_FB_MATROX_I2C is not set +CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 572d4f5eaacb..b3ae2993efb8 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -13,12 +13,15 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ signal_32.o pmc.o obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o obj-$(CONFIG_PPC_RTAS) += rtas.o +obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o +obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -38,6 +41,7 @@ obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o +obj-$(CONFIG_SMP) += smp.o ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -46,8 +50,9 @@ endif else # stuff used from here for ARCH=ppc or ARCH=ppc64 +smpobj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o + setup-common.o $(smpobj-y) endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 330cd783206f..bc5a3689cc05 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -40,7 +40,7 @@ #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/cache.h> #include <asm/systemcfg.h> #include <asm/compat.h> diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 147215a0d6c0..45d81976987f 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -35,7 +35,7 @@ #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -1914,24 +1914,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c index b81de286df5e..eded971d1bf9 100644 --- a/arch/powerpc/kernel/lparmap.c +++ b/arch/powerpc/kernel/lparmap.c @@ -8,7 +8,7 @@ */ #include <asm/mmu.h> #include <asm/page.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> const struct LparMap __attribute__((__section__(".text"))) xLparMap = { .xNumberEsids = HvEsidsToMap, diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h new file mode 100644 index 000000000000..90e562771791 --- /dev/null +++ b/arch/powerpc/kernel/ppc32.h @@ -0,0 +1,138 @@ +#ifndef _PPC64_PPC32_H +#define _PPC64_PPC32_H + +#include <linux/compat.h> +#include <asm/siginfo.h> +#include <asm/signal.h> + +/* + * Data types and macros for providing 32b PowerPC support. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* These are here to support 32-bit syscalls on a 64-bit kernel. */ + +typedef struct compat_siginfo { + int si_signo; + int si_errno; + int si_code; + + union { + int _pad[SI_PAD_SIZE32]; + + /* kill() */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + compat_timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + + /* SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + compat_clock_t _utime; + compat_clock_t _stime; + } _sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */ + struct { + unsigned int _addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + } _sifields; +} compat_siginfo_t; + +#define __old_sigaction32 old_sigaction32 + +struct __old_sigaction32 { + compat_uptr_t sa_handler; + compat_old_sigset_t sa_mask; + unsigned int sa_flags; + compat_uptr_t sa_restorer; /* not used by Linux/SPARC yet */ +}; + + + +struct sigaction32 { + compat_uptr_t sa_handler; /* Really a pointer, but need to deal with 32 bits */ + unsigned int sa_flags; + compat_uptr_t sa_restorer; /* Another 32 bit pointer */ + compat_sigset_t sa_mask; /* A 32 bit mask */ +}; + +typedef struct sigaltstack_32 { + unsigned int ss_sp; + int ss_flags; + compat_size_t ss_size; +} stack_32_t; + +struct pt_regs32 { + unsigned int gpr[32]; + unsigned int nip; + unsigned int msr; + unsigned int orig_gpr3; /* Used for restarting system calls */ + unsigned int ctr; + unsigned int link; + unsigned int xer; + unsigned int ccr; + unsigned int mq; /* 601 only (not used at present) */ + unsigned int trap; /* Reason for being here */ + unsigned int dar; /* Fault registers */ + unsigned int dsisr; + unsigned int result; /* Result of a system call */ +}; + +struct sigcontext32 { + unsigned int _unused[4]; + int signal; + compat_uptr_t handler; + unsigned int oldmask; + compat_uptr_t regs; /* 4 byte pointer to the pt_regs32 structure. */ +}; + +struct mcontext32 { + elf_gregset_t32 mc_gregs; + elf_fpregset_t mc_fregs; + unsigned int mc_pad[2]; + elf_vrregset_t32 mc_vregs __attribute__((__aligned__(16))); +}; + +struct ucontext32 { + unsigned int uc_flags; + unsigned int uc_link; + stack_32_t uc_stack; + int uc_pad[7]; + compat_uptr_t uc_regs; /* points to uc_mcontext field */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ + /* glibc has 1024-bit signal masks, ours are 64-bit */ + int uc_maskext[30]; + int uc_pad2[3]; + struct mcontext32 uc_mcontext; +}; + +#endif /* _PPC64_PPC32_H */ diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 8bc540337ba0..47d6f7e2ea9f 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -81,15 +81,6 @@ EXPORT_SYMBOL(_prep_type); EXPORT_SYMBOL(ucSystemType); #endif -#if !defined(__INLINE_BITOPS) -EXPORT_SYMBOL(set_bit); -EXPORT_SYMBOL(clear_bit); -EXPORT_SYMBOL(change_bit); -EXPORT_SYMBOL(test_and_set_bit); -EXPORT_SYMBOL(test_and_clear_bit); -EXPORT_SYMBOL(test_and_change_bit); -#endif /* __INLINE_BITOPS */ - EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 8f85dabe4df3..96843211cc5c 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -48,8 +48,8 @@ #include <asm/prom.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> -#include <asm/plpar_wrappers.h> #include <asm/time.h> +#include <asm/machdep.h> #endif extern unsigned long _get_SP(void); @@ -201,27 +201,15 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) } #endif /* CONFIG_SPE */ -static void set_dabr_spr(unsigned long val) -{ - mtspr(SPRN_DABR, val); -} - int set_dabr(unsigned long dabr) { - int ret = 0; - #ifdef CONFIG_PPC64 - if (firmware_has_feature(FW_FEATURE_XDABR)) { - /* We want to catch accesses from kernel and userspace */ - unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER; - ret = plpar_set_xdabr(dabr, flags); - } else if (firmware_has_feature(FW_FEATURE_DABR)) { - ret = plpar_set_dabr(dabr); - } else + if (ppc_md.set_dabr) + return ppc_md.set_dabr(dabr); #endif - set_dabr_spr(dabr); - return ret; + mtspr(SPRN_DABR, dabr); + return 0; } #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 2eccd0e159e3..eec2da695508 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1285,7 +1285,7 @@ static int __init early_init_dt_scan_memory(unsigned long node, endp = reg + (l / sizeof(cell_t)); - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", + DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", uname, l, reg[0], reg[1], reg[2], reg[3]); while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 9750b3cd8ecd..c758b6624d7b 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2000,7 +2000,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, #endif /* - * On pSeries and BPA, copy the CPU hold code + * Copy the CPU hold code */ if (RELOC(of_platform) != PLATFORM_POWERMAC) copy_and_flush(0, KERNELBASE + offset, 0x100, 0); diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 5bdd5b079d96..5bdd5b079d96 100644 --- a/arch/ppc64/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4d22eeeeb91d..b7fc2d884950 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -43,6 +43,13 @@ char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; unsigned long rtas_rmo_buf; /* + * If non-NULL, this gets called when the kernel terminates. + * This is done like this so rtas_flash can be a module. + */ +void (*rtas_flash_term_hook)(int); +EXPORT_SYMBOL(rtas_flash_term_hook); + +/* * call_rtas_display_status and call_rtas_display_status_delay * are designed only for very early low-level debugging, which * is why the token is hard-coded to 10. @@ -206,6 +213,7 @@ void rtas_progress(char *s, unsigned short hex) spin_unlock(&progress_lock); } +EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */ int rtas_token(const char *service) { @@ -492,6 +500,8 @@ int rtas_set_indicator(int indicator, int index, int new_value) void rtas_restart(char *cmd) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_RESTART); printk("RTAS system-reboot returned %d\n", rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); for (;;); @@ -499,6 +509,8 @@ void rtas_restart(char *cmd) void rtas_power_off(void) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); /* allow power on only with power button press */ printk("RTAS power-off returned %d\n", rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); @@ -507,7 +519,12 @@ void rtas_power_off(void) void rtas_halt(void) { - rtas_power_off(); + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_HALT); + /* allow power on only with power button press */ + printk("RTAS power-off returned %d\n", + rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); + for (;;); } /* Must be in the RMO region, so we place it here */ diff --git a/arch/ppc64/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 923e2e201a70..50500093c97f 100644 --- a/arch/ppc64/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -19,6 +19,7 @@ #include <asm/delay.h> #include <asm/uaccess.h> #include <asm/rtas.h> +#include <asm/abs_addr.h> #define MODULE_VERS "1.0" #define MODULE_NAME "rtas_flash" @@ -71,10 +72,36 @@ #define VALIDATE_BUF_SIZE 4096 #define RTAS_MSG_MAXLEN 64 +struct flash_block { + char *data; + unsigned long length; +}; + +/* This struct is very similar but not identical to + * that needed by the rtas flash update. + * All we need to do for rtas is rewrite num_blocks + * into a version/length and translate the pointers + * to absolute. + */ +#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block)) +struct flash_block_list { + unsigned long num_blocks; + struct flash_block_list *next; + struct flash_block blocks[FLASH_BLOCKS_PER_NODE]; +}; +struct flash_block_list_header { /* just the header of flash_block_list */ + unsigned long num_blocks; + struct flash_block_list *next; +}; + +static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; + +#define FLASH_BLOCK_LIST_VERSION (1UL) + /* Local copy of the flash block list. * We only allow one open of the flash proc file and create this - * list as we go. This list will be put in the kernel's - * rtas_firmware_flash_list global var once it is fully read. + * list as we go. This list will be put in the + * rtas_firmware_flash_list var once it is fully read. * * For convenience as we build the list we use virtual addrs, * we do not fill in the version number, and the length field @@ -562,6 +589,86 @@ static int validate_flash_release(struct inode *inode, struct file *file) return 0; } +static void rtas_flash_firmware(int reboot_type) +{ + unsigned long image_size; + struct flash_block_list *f, *next, *flist; + unsigned long rtas_block_list; + int i, status, update_token; + + if (rtas_firmware_flash_list.next == NULL) + return; /* nothing to do */ + + if (reboot_type != SYS_RESTART) { + printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); + printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); + return; + } + + update_token = rtas_token("ibm,update-flash-64-and-reboot"); + if (update_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot " + "is not available -- not a service partition?\n"); + printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); + return; + } + + /* NOTE: the "first" block list is a global var with no data + * blocks in the kernel data segment. We do this because + * we want to ensure this block_list addr is under 4GB. + */ + rtas_firmware_flash_list.num_blocks = 0; + flist = (struct flash_block_list *)&rtas_firmware_flash_list; + rtas_block_list = virt_to_abs(flist); + if (rtas_block_list >= 4UL*1024*1024*1024) { + printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); + return; + } + + printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); + /* Update the block_list in place. */ + image_size = 0; + for (f = flist; f; f = next) { + /* Translate data addrs to absolute */ + for (i = 0; i < f->num_blocks; i++) { + f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); + image_size += f->blocks[i].length; + } + next = f->next; + /* Don't translate NULL pointer for last entry */ + if (f->next) + f->next = (struct flash_block_list *)virt_to_abs(f->next); + else + f->next = NULL; + /* make num_blocks into the version/length field */ + f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); + } + + printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); + printk(KERN_ALERT "FLASH: performing flash and reboot\n"); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); + printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); + status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); + switch (status) { /* should only get "bad" status */ + case 0: + printk(KERN_ALERT "FLASH: success\n"); + break; + case -1: + printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); + break; + case -3: + printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); + break; + case -4: + printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); + break; + default: + printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); + break; + } +} + static void remove_flash_pde(struct proc_dir_entry *dp) { if (dp) { @@ -701,6 +808,7 @@ int __init rtas_flash_init(void) if (rc != 0) goto cleanup; + rtas_flash_term_hook = rtas_flash_firmware; return 0; cleanup: @@ -714,6 +822,7 @@ cleanup: void __exit rtas_flash_cleanup(void) { + rtas_flash_term_hook = NULL; remove_flash_pde(firmware_flash_pde); remove_flash_pde(firmware_update_pde); remove_flash_pde(validate_pde); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1292460fcde2..d43fa8c0e5ac 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -170,12 +170,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) } #ifdef CONFIG_SMP -#ifdef CONFIG_PPC64 /* XXX for now */ pvr = per_cpu(pvr, cpu_id); #else - pvr = cpu_data[cpu_id].pvr; -#endif -#else pvr = mfspr(SPRN_PVR); #endif maj = (pvr >> 8) & 0xFF; @@ -201,11 +197,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) #ifdef CONFIG_TAU_AVERAGE /* more straightforward, but potentially misleading */ seq_printf(m, "temperature \t: %u C (uncalibrated)\n", - cpu_temp(i)); + cpu_temp(cpu_id)); #else /* show the actual temp sensor range */ u32 temp; - temp = cpu_temp_both(i); + temp = cpu_temp_both(cpu_id); seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", temp & 0xff, temp >> 16); #endif @@ -408,3 +404,118 @@ static int __init set_preferred_console(void) } console_initcall(set_preferred_console); #endif /* CONFIG_PPC_MULTIPLATFORM */ + +#ifdef CONFIG_SMP + +/** + * setup_cpu_maps - initialize the following cpu maps: + * cpu_possible_map + * cpu_present_map + * cpu_sibling_map + * + * Having the possible map set up early allows us to restrict allocations + * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. + * + * We do not initialize the online map here; cpus set their own bits in + * cpu_online_map as they come up. + * + * This function is valid only for Open Firmware systems. finish_device_tree + * must be called before using this. + * + * While we're here, we may as well set the "physical" cpu ids in the paca. + */ +void __init smp_setup_cpu_maps(void) +{ + struct device_node *dn = NULL; + int cpu = 0; + int swap_cpuid = 0; + + while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { + int *intserv; + int j, len = sizeof(u32), nthreads = 1; + + intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s", + &len); + if (intserv) + nthreads = len / sizeof(int); + else { + intserv = (int *) get_property(dn, "reg", NULL); + if (!intserv) + intserv = &cpu; /* assume logical == phys */ + } + + for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, intserv[j]); + + if (intserv[j] == boot_cpuid_phys) + swap_cpuid = cpu; + cpu_set(cpu, cpu_possible_map); + cpu++; + } + } + + /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that + * boot cpu is logical 0. + */ + if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { + u32 tmp; + tmp = get_hard_smp_processor_id(0); + set_hard_smp_processor_id(0, boot_cpuid_phys); + set_hard_smp_processor_id(swap_cpuid, tmp); + } + +#ifdef CONFIG_PPC64 + /* + * On pSeries LPAR, we need to know how many cpus + * could possibly be added to this partition. + */ + if (systemcfg->platform == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { + int num_addr_cell, num_size_cell, maxcpus; + unsigned int *ireg; + + num_addr_cell = prom_n_addr_cells(dn); + num_size_cell = prom_n_size_cells(dn); + + ireg = (unsigned int *) + get_property(dn, "ibm,lrdr-capacity", NULL); + + if (!ireg) + goto out; + + maxcpus = ireg[num_addr_cell + num_size_cell]; + + /* Double maxcpus for processors which have SMT capability */ + if (cpu_has_feature(CPU_FTR_SMT)) + maxcpus *= 2; + + if (maxcpus > NR_CPUS) { + printk(KERN_WARNING + "Partition configured for %d cpus, " + "operating system maximum is %d.\n", + maxcpus, NR_CPUS); + maxcpus = NR_CPUS; + } else + printk(KERN_INFO "Partition configured for %d cpus.\n", + maxcpus); + + for (cpu = 0; cpu < maxcpus; cpu++) + cpu_set(cpu, cpu_possible_map); + out: + of_node_put(dn); + } + + /* + * Do the sibling map; assume only two threads per processor. + */ + for_each_cpu(cpu) { + cpu_set(cpu, cpu_sibling_map[cpu]); + if (cpu_has_feature(CPU_FTR_SMT)) + cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); + } + + systemcfg->processorCount = num_present_cpus(); +#endif /* CONFIG_PPC64 */ +} +#endif /* CONFIG_SMP */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9680ae99b084..b45eedbb4b3a 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -288,6 +288,8 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); finish_device_tree(); + smp_setup_cpu_maps(); + #ifdef CONFIG_BOOTX_TEXT init_boot_display(); #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 40c48100bf1b..6b52cce872be 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -56,7 +56,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/firmware.h> #include <asm/systemcfg.h> #include <asm/xmon.h> @@ -103,8 +103,6 @@ extern void htab_initialize(void); extern void early_init_devtree(void *flat_dt); extern void unflatten_device_tree(void); -extern void smp_release_cpus(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -183,120 +181,14 @@ static int __init early_smt_enabled(char *p) } early_param("smt-enabled", early_smt_enabled); -/** - * setup_cpu_maps - initialize the following cpu maps: - * cpu_possible_map - * cpu_present_map - * cpu_sibling_map - * - * Having the possible map set up early allows us to restrict allocations - * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. - * - * We do not initialize the online map here; cpus set their own bits in - * cpu_online_map as they come up. - * - * This function is valid only for Open Firmware systems. finish_device_tree - * must be called before using this. - * - * While we're here, we may as well set the "physical" cpu ids in the paca. - */ -static void __init setup_cpu_maps(void) -{ - struct device_node *dn = NULL; - int cpu = 0; - int swap_cpuid = 0; - - check_smt_enabled(); - - while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { - u32 *intserv; - int j, len = sizeof(u32), nthreads; - - intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s", - &len); - if (!intserv) - intserv = (u32 *)get_property(dn, "reg", NULL); - - nthreads = len / sizeof(u32); - - for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; - cpu_set(cpu, cpu_possible_map); - cpu++; - } - } - - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - - /* - * On pSeries LPAR, we need to know how many cpus - * could possibly be added to this partition. - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { - int num_addr_cell, num_size_cell, maxcpus; - unsigned int *ireg; - - num_addr_cell = prom_n_addr_cells(dn); - num_size_cell = prom_n_size_cells(dn); - - ireg = (unsigned int *) - get_property(dn, "ibm,lrdr-capacity", NULL); - - if (!ireg) - goto out; - - maxcpus = ireg[num_addr_cell + num_size_cell]; - - /* Double maxcpus for processors which have SMT capability */ - if (cpu_has_feature(CPU_FTR_SMT)) - maxcpus *= 2; - - if (maxcpus > NR_CPUS) { - printk(KERN_WARNING - "Partition configured for %d cpus, " - "operating system maximum is %d.\n", - maxcpus, NR_CPUS); - maxcpus = NR_CPUS; - } else - printk(KERN_INFO "Partition configured for %d cpus.\n", - maxcpus); - - for (cpu = 0; cpu < maxcpus; cpu++) - cpu_set(cpu, cpu_possible_map); - out: - of_node_put(dn); - } - - /* - * Do the sibling map; assume only two threads per processor. - */ - for_each_cpu(cpu) { - cpu_set(cpu, cpu_sibling_map[cpu]); - if (cpu_has_feature(CPU_FTR_SMT)) - cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); - } - - systemcfg->processorCount = num_present_cpus(); -} +#else +#define check_smt_enabled() #endif /* CONFIG_SMP */ extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; -extern struct machdep_calls bpa_md; +extern struct machdep_calls cell_md; extern struct machdep_calls iseries_md; /* Ultimately, stuff them in an elf section like initcalls... */ @@ -310,8 +202,8 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ -#ifdef CONFIG_PPC_BPA - &bpa_md, +#ifdef CONFIG_PPC_CELL + &cell_md, #endif #ifdef CONFIG_PPC_ISERIES &iseries_md, @@ -400,6 +292,29 @@ void __init early_setup(unsigned long dt_ptr) } +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +void smp_release_cpus(void) +{ + extern unsigned long __secondary_hold_spinloop; + + DBG(" -> smp_release_cpus()\n"); + + /* All secondary cpus are spinning on a common spinloop, release them + * all now so they can start to spin on their individual paca + * spinloops. For non SMP kernels, the secondary cpus never get out + * of the common spinloop. + * This is useless but harmless on iSeries, secondaries are already + * waiting on their paca spinloops. */ + + __secondary_hold_spinloop = 1; + mb(); + + DBG(" <- smp_release_cpus()\n"); +} +#else +#define smp_release_cpus() +#endif /* CONFIG_SMP || CONFIG_KEXEC */ + /* * Initialize some remaining members of the ppc64_caches and systemcfg structures * (at least until we get rid of them completely). This is mostly some @@ -589,17 +504,13 @@ void __init setup_system(void) parse_early_param(); -#ifdef CONFIG_SMP - /* - * iSeries has already initialized the cpu maps at this point. - */ - setup_cpu_maps(); + check_smt_enabled(); + smp_setup_cpu_maps(); /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ smp_release_cpus(); -#endif printk("Starting Linux PPC64 %s\n", system_utsname.version); @@ -631,23 +542,6 @@ static int ppc64_panic_event(struct notifier_block *this, return NOTIFY_DONE; } -#ifdef CONFIG_PPC_ISERIES -/* - * On iSeries we just parse the mem=X option from the command line. - * On pSeries it's a bit more complicated, see prom_init_mem() - */ -static int __init early_parsemem(char *p) -{ - if (!p) - return 0; - - memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE); - - return 0; -} -early_param("mem", early_parsemem); -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS static void __init irqstack_early_init(void) { diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 444c3e81884c..876c57c11365 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -43,7 +43,7 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> #ifdef CONFIG_PPC64 -#include <asm/ppc32.h> +#include "ppc32.h" #include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/vdso.h> diff --git a/arch/ppc64/kernel/signal.c b/arch/powerpc/kernel/signal_64.c index ec9d0984b6a0..ec9d0984b6a0 100644 --- a/arch/ppc64/kernel/signal.c +++ b/arch/powerpc/kernel/signal_64.c diff --git a/arch/ppc64/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index 7d8ec9996b3e..9adef3bddad4 100644 --- a/arch/ppc64/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -22,11 +22,11 @@ enum { }; static struct { - volatile long tb; - volatile long mark; + volatile u64 tb; + volatile u64 mark; volatile int cmd; volatile int handshake; - int filler[3]; + int filler[2]; volatile int ack; int filler2[7]; @@ -36,89 +36,80 @@ static struct { static volatile int running; -static void __devinit -enter_contest( long mark, long add ) +static void __devinit enter_contest(u64 mark, long add) { - while( (long)(mftb() - mark) < 0 ) + while (get_tb() < mark) tbsync->race_result = add; } -void __devinit -smp_generic_take_timebase( void ) +void __devinit smp_generic_take_timebase(void) { int cmd; - long tb; + u64 tb; local_irq_disable(); - while( !running ) - ; + while (!running) + barrier(); rmb(); - for( ;; ) { + for (;;) { tbsync->ack = 1; - while( !tbsync->handshake ) - ; + while (!tbsync->handshake) + barrier(); rmb(); cmd = tbsync->cmd; tb = tbsync->tb; + mb(); tbsync->ack = 0; - if( cmd == kExit ) - return; - - if( cmd == kSetAndTest ) { - while( tbsync->handshake ) - ; - asm volatile ("mttbl %0" :: "r" (tb & 0xfffffffful) ); - asm volatile ("mttbu %0" :: "r" (tb >> 32) ); - } else { - while( tbsync->handshake ) - ; - } - enter_contest( tbsync->mark, -1 ); + if (cmd == kExit) + break; + + while (tbsync->handshake) + barrier(); + if (cmd == kSetAndTest) + set_tb(tb >> 32, tb & 0xfffffffful); + enter_contest(tbsync->mark, -1); } local_irq_enable(); } -static int __devinit -start_contest( int cmd, long offset, long num ) +static int __devinit start_contest(int cmd, long offset, int num) { int i, score=0; - long tb, mark; + u64 tb; + long mark; tbsync->cmd = cmd; local_irq_disable(); - for( i=-3; i<num; ) { - tb = (long)mftb() + 400; + for (i = -3; i < num; ) { + tb = get_tb() + 400; tbsync->tb = tb + offset; tbsync->mark = mark = tb + 400; wmb(); tbsync->handshake = 1; - while( tbsync->ack ) - ; + while (tbsync->ack) + barrier(); - while( (long)(mftb() - tb) <= 0 ) - ; + while (get_tb() <= tb) + barrier(); tbsync->handshake = 0; - enter_contest( mark, 1 ); + enter_contest(mark, 1); - while( !tbsync->ack ) - ; + while (!tbsync->ack) + barrier(); - if ((tbsync->tb ^ (long)mftb()) & 0x8000000000000000ul) - continue; - if( i++ > 0 ) + if (i++ > 0) score += tbsync->race_result; } local_irq_enable(); return score; } -void __devinit -smp_generic_give_timebase( void ) +void __devinit smp_generic_give_timebase(void) { int i, score, score2, old, min=0, max=5000, offset=1000; @@ -130,14 +121,14 @@ smp_generic_give_timebase( void ) mb(); running = 1; - while( !tbsync->ack ) - ; + while (!tbsync->ack) + barrier(); printk("Got ack\n"); /* binary search */ - for( old=-1 ; old != offset ; offset=(min+max)/2 ) { - score = start_contest( kSetAndTest, offset, NUM_ITER ); + for (old = -1; old != offset ; offset = (min+max) / 2) { + score = start_contest(kSetAndTest, offset, NUM_ITER); printk("score %d, offset %d\n", score, offset ); @@ -147,21 +138,22 @@ smp_generic_give_timebase( void ) min = offset; old = offset; } - score = start_contest( kSetAndTest, min, NUM_ITER ); - score2 = start_contest( kSetAndTest, max, NUM_ITER ); + score = start_contest(kSetAndTest, min, NUM_ITER); + score2 = start_contest(kSetAndTest, max, NUM_ITER); - printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 ); - score = abs( score ); - score2 = abs( score2 ); + printk("Min %d (score %d), Max %d (score %d)\n", + min, score, max, score2); + score = abs(score); + score2 = abs(score2); offset = (score < score2) ? min : max; /* guard against inaccurate mttb */ - for( i=0; i<10; i++ ) { - start_contest( kSetAndTest, offset, NUM_ITER/10 ); + for (i = 0; i < 10; i++) { + start_contest(kSetAndTest, offset, NUM_ITER/10); - if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 ) + if ((score2 = start_contest(kTest, offset, NUM_ITER)) < 0) score2 = -score2; - if( score2 <= score || score2 < 20 ) + if (score2 <= score || score2 < 20) break; } printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER ); @@ -170,10 +162,10 @@ smp_generic_give_timebase( void ) tbsync->cmd = kExit; wmb(); tbsync->handshake = 1; - while( tbsync->ack ) - ; + while (tbsync->ack) + barrier(); tbsync->handshake = 0; - kfree( tbsync ); + kfree(tbsync); tbsync = NULL; running = 0; } diff --git a/arch/ppc64/kernel/smp.c b/arch/powerpc/kernel/smp.c index 017c12919832..1794a694a928 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -39,13 +39,18 @@ #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/paca.h> #include <asm/time.h> +#include <asm/xmon.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> -#include <asm/abs_addr.h> #include <asm/mpic.h> +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#endif + +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -60,6 +65,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); +/* SMP operations for this machine */ struct smp_ops_t *smp_ops; static volatile unsigned int cpu_callin_map[NR_CPUS]; @@ -89,7 +95,9 @@ void __devinit smp_mpic_setup_cpu(int cpu) { mpic_setup_this_cpu(); } +#endif /* CONFIG_MPIC */ +#ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -102,8 +110,7 @@ void __devinit smp_generic_kick_cpu(int nr) paca[nr].cpu_start = 1; smp_mb(); } - -#endif /* CONFIG_MPIC */ +#endif void smp_message_recv(int msg, struct pt_regs *regs) { @@ -111,15 +118,10 @@ void smp_message_recv(int msg, struct pt_regs *regs) case PPC_MSG_CALL_FUNCTION: smp_call_function_interrupt(); break; - case PPC_MSG_RESCHEDULE: + case PPC_MSG_RESCHEDULE: /* XXX Do we have to do this? */ set_need_resched(); break; -#if 0 - case PPC_MSG_MIGRATE_TASK: - /* spare */ - break; -#endif #ifdef CONFIG_DEBUGGER case PPC_MSG_DEBUGGER_BREAK: debugger_ipi(regs); @@ -171,8 +173,8 @@ static struct call_data_struct { int wait; } *call_data; -/* delay of at least 8 seconds on 1GHz cpu */ -#define SMP_CALL_TIMEOUT (1UL << (30 + 3)) +/* delay of at least 8 seconds */ +#define SMP_CALL_TIMEOUT 8 /* * This function sends a 'generic call function' IPI to all other CPUs @@ -194,7 +196,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, { struct call_data_struct data; int ret = -1, cpus; - unsigned long timeout; + u64 timeout; /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -220,11 +222,12 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Send a message to all other CPUs and wait for them to respond */ smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION); + timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec; + /* Wait for response */ - timeout = SMP_CALL_TIMEOUT; while (atomic_read(&data.started) != cpus) { HMT_low(); - if (--timeout == 0) { + if (get_tb() >= timeout) { printk("smp_call_function on cpu %d: other cpus not " "responding (%d)\n", smp_processor_id(), atomic_read(&data.started)); @@ -234,10 +237,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, } if (wait) { - timeout = SMP_CALL_TIMEOUT; while (atomic_read(&data.finished) != cpus) { HMT_low(); - if (--timeout == 0) { + if (get_tb() >= timeout) { printk("smp_call_function on cpu %d: other " "cpus not finishing (%d/%d)\n", smp_processor_id(), @@ -251,7 +253,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, ret = 0; -out: + out: call_data = NULL; HMT_medium(); spin_unlock(&call_lock); @@ -313,8 +315,11 @@ static void __init smp_create_idle(unsigned int cpu) p = fork_idle(cpu); if (IS_ERR(p)) panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); +#ifdef CONFIG_PPC64 paca[cpu].__current = p; +#endif current_set[cpu] = p->thread_info; + p->thread_info->cpu = cpu; } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -333,18 +338,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; -#ifndef CONFIG_PPC_ISERIES - paca[boot_cpuid].next_jiffy_update_tb = tb_last_stamp = get_tb(); - - /* - * Should update do_gtod.stamp_xsec. - * For now we leave it which means the time can be some - * number of msecs off until someone does a settimeofday() - */ - do_gtod.varp->tb_orig_stamp = tb_last_stamp; - systemcfg->tb_orig_stamp = tb_last_stamp; -#endif - max_cpus = smp_ops->probe(); smp_space_timers(max_cpus); @@ -359,8 +352,9 @@ void __devinit smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != boot_cpuid); cpu_set(boot_cpuid, cpu_online_map); - +#ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; +#endif current_set[boot_cpuid] = current->thread_info; } @@ -444,13 +438,16 @@ int __devinit __cpu_up(unsigned int cpu) { int c; + secondary_ti = current_set[cpu]; if (!cpu_enable(cpu)) return 0; if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; +#ifdef CONFIG_PPC64 paca[cpu].default_decr = tb_ticks_per_jiffy; +#endif /* Make sure callin-map entry is 0 (can be leftover a CPU * hotplug @@ -513,7 +510,7 @@ int __devinit start_secondary(void *unused) current->active_mm = &init_mm; smp_store_cpu_info(cpu); - set_dec(paca[cpu].default_decr); + set_dec(tb_ticks_per_jiffy); cpu_callin_map[cpu] = 1; smp_ops->setup_cpu(cpu); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 23436b6c1881..6996a593dcb3 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -66,8 +66,8 @@ #include <asm/firmware.h> #endif #ifdef CONFIG_PPC_ISERIES -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #endif /* keep track of when we need to update the rtc */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 5d638ecddbd0..07e5ee40b870 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -147,8 +147,8 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; - case PLATFORM_BPA: - printk("BPA "); + case PLATFORM_CELL: + printk("CELL "); nl = 1; break; } @@ -749,22 +749,22 @@ static int check_bug_trap(struct pt_regs *regs) if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ #ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", + xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); #endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } #ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); xmon(regs); #endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d4dfcfbce272..7fa7b15fd8e6 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -3,9 +3,12 @@ #include <asm/page.h> #else #define PAGE_SIZE 4096 +#define KERNELBASE CONFIG_KERNEL_START #endif #include <asm-generic/vmlinux.lds.h> +ENTRY(_stext) + #ifdef CONFIG_PPC64 OUTPUT_ARCH(powerpc:common64) jiffies = jiffies_64; @@ -21,33 +24,9 @@ SECTIONS *(.exit.data) } + . = KERNELBASE; /* Read-only sections, merged into text segment: */ -#ifdef CONFIG_PPC32 - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } -/* .init : { *(.init) } =0*/ - .plt : { *(.plt) } -#endif .text : { *(.text .text.*) SCHED_TEXT diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e6b2be3bcec1..34f5c2e074c9 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -3,13 +3,14 @@ # ifeq ($(CONFIG_PPC_MERGE),y) -obj-y := string.o +obj-y := string.o strcase.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o endif -obj-y += strcase.o -obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o +obj-y += bitops.o obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ - memcpy_64.o usercopy_64.o mem_64.o + memcpy_64.o usercopy_64.o mem_64.o string.o \ + strcase.o obj-$(CONFIG_PPC_ISERIES) += e2a.o obj-$(CONFIG_XMON) += sstep.o diff --git a/arch/ppc64/kernel/bitops.c b/arch/powerpc/lib/bitops.c index ae329e8b4acb..b67ce3004ebf 100644 --- a/arch/ppc64/kernel/bitops.c +++ b/arch/powerpc/lib/bitops.c @@ -1,93 +1,97 @@ -/* - * These are too big to be inlined. - */ - -#include <linux/kernel.h> +#include <linux/types.h> #include <linux/module.h> -#include <linux/bitops.h> #include <asm/byteorder.h> +#include <asm/bitops.h> -unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +/** + * find_next_bit - find the next set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +unsigned long find_next_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 63UL; + offset %= BITS_PER_LONG; if (offset) { tmp = *(p++); - tmp |= ~0UL >> (64 - offset); - if (size < 64) + tmp &= (~0UL << offset); + if (size < BITS_PER_LONG) goto found_first; - if (~tmp) + if (tmp) goto found_middle; - size -= 64; - result += 64; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size & ~63UL) { - if (~(tmp = *(p++))) + while (size & ~(BITS_PER_LONG-1)) { + if ((tmp = *(p++))) goto found_middle; - result += 64; - size -= 64; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; tmp = *p; found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ + tmp &= (~0UL >> (64 - size)); + if (tmp == 0UL) /* Are any bits set? */ return result + size; /* Nope. */ found_middle: - return result + ffz(tmp); + return result + __ffs(tmp); } +EXPORT_SYMBOL(find_next_bit); -EXPORT_SYMBOL(find_next_zero_bit); - -unsigned long find_next_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +/* + * This implementation of find_{first,next}_zero_bit was stolen from + * Linus' asm-alpha/bitops.h. + */ +unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 63UL; + offset %= BITS_PER_LONG; if (offset) { tmp = *(p++); - tmp &= (~0UL << offset); - if (size < 64) + tmp |= ~0UL >> (BITS_PER_LONG - offset); + if (size < BITS_PER_LONG) goto found_first; - if (tmp) + if (~tmp) goto found_middle; - size -= 64; - result += 64; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size & ~63UL) { - if ((tmp = *(p++))) + while (size & ~(BITS_PER_LONG-1)) { + if (~(tmp = *(p++))) goto found_middle; - result += 64; - size -= 64; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; tmp = *p; found_first: - tmp &= (~0UL >> (64 - size)); - if (tmp == 0UL) /* Are any bits set? */ + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ return result + size; /* Nope. */ found_middle: - return result + __ffs(tmp); + return result + ffz(tmp); } - -EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(find_next_zero_bit); static inline unsigned int ext2_ilog2(unsigned int x) { @@ -106,8 +110,8 @@ static inline unsigned int ext2_ffz(unsigned int x) return rc; } -unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +unsigned long find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) { const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5); unsigned int result = offset & ~31; @@ -143,5 +147,4 @@ found_first: found_middle: return result + ext2_ffz(tmp); } - EXPORT_SYMBOL(find_next_zero_le_bit); diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 3794715b2972..2a912f411eb4 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -22,7 +22,7 @@ /* waiting for a spinlock... */ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) #include <asm/hvcall.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> void __spin_yield(raw_spinlock_t *lock) { diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 172c0db63504..8836b3a00668 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ +obj-$(CONFIG_PPC_CELL) += cell/ diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile new file mode 100644 index 000000000000..55e094b96bc0 --- /dev/null +++ b/arch/powerpc/platforms/cell/Makefile @@ -0,0 +1,2 @@ +obj-y += interrupt.o iommu.o setup.o spider-pic.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/powerpc/platforms/cell/interrupt.c index 0aaa878e19d3..7fbe78a9327d 100644 --- a/arch/ppc64/kernel/bpa_iic.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -1,5 +1,5 @@ /* - * BPA Internal Interrupt Controller + * Cell Internal Interrupt Controller * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * @@ -31,7 +31,7 @@ #include <asm/prom.h> #include <asm/ptrace.h> -#include "bpa_iic.h" +#include "interrupt.h" struct iic_pending_bits { u32 data; @@ -89,7 +89,7 @@ static void iic_end(unsigned int irq) } static struct hw_interrupt_type iic_pic = { - .typename = " BPA-IIC ", + .typename = " CELL-IIC ", .startup = iic_startup, .enable = iic_enable, .disable = iic_disable, @@ -106,7 +106,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending) irq = -1; /* - * This mapping is specific to the Broadband + * This mapping is specific to the Cell Broadband * Engine. We might need to get the numbers * from the device tree to support future CPUs. */ diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/powerpc/platforms/cell/interrupt.h index 6833c3022166..37d58e6fd0c6 100644 --- a/arch/ppc64/kernel/bpa_iic.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -1,5 +1,5 @@ -#ifndef ASM_BPA_IIC_H -#define ASM_BPA_IIC_H +#ifndef ASM_CELL_PIC_H +#define ASM_CELL_PIC_H #ifdef __KERNEL__ /* * Mapping of IIC pending bits into per-node @@ -21,7 +21,7 @@ * + node number * * don't care * - * A node consists of a Broadband Engine and an optional + * A node consists of a Cell Broadband Engine and an optional * south bridge device providing a maximum of 64 IRQs. * The south bridge may be connected to either IOIF0 * or IOIF1. @@ -59,4 +59,4 @@ extern void spider_init_IRQ(void); extern int spider_get_irq(unsigned long int_pending); #endif -#endif /* ASM_BPA_IIC_H */ +#endif /* ASM_CELL_PIC_H */ diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/powerpc/platforms/cell/iommu.c index da1b4b7a3269..74f999b4ac9e 100644 --- a/arch/ppc64/kernel/bpa_iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1,5 +1,5 @@ /* - * IOMMU implementation for Broadband Processor Architecture + * IOMMU implementation for Cell Broadband Processor Architecture * We just establish a linear mapping at boot by setting all the * IOPT cache entries in the CPU. * The mapping functions should be identical to pci_direct_iommu, @@ -41,7 +41,7 @@ #include <asm/system.h> #include <asm/ppc-pci.h> -#include "bpa_iommu.h" +#include "iommu.h" static inline unsigned long get_iopt_entry(unsigned long real_address, unsigned long ioid, @@ -276,7 +276,7 @@ static void iommu_dev_setup_null(struct pci_dev *d) { } * for each DMA window used by any device. For now, we * happen to know that there is only one DMA window in use, * starting at iopt_phys_offset. */ -static void bpa_map_iommu(void) +static void cell_map_iommu(void) { unsigned long address; void __iomem *base; @@ -309,7 +309,7 @@ static void bpa_map_iommu(void) } -static void *bpa_alloc_coherent(struct device *hwdev, size_t size, +static void *cell_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { void *ret; @@ -317,65 +317,65 @@ static void *bpa_alloc_coherent(struct device *hwdev, size_t size, ret = (void *)__get_free_pages(flag, get_order(size)); if (ret != NULL) { memset(ret, 0, size); - *dma_handle = virt_to_abs(ret) | BPA_DMA_VALID; + *dma_handle = virt_to_abs(ret) | CELL_DMA_VALID; } return ret; } -static void bpa_free_coherent(struct device *hwdev, size_t size, +static void cell_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) { free_pages((unsigned long)vaddr, get_order(size)); } -static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr, +static dma_addr_t cell_map_single(struct device *hwdev, void *ptr, size_t size, enum dma_data_direction direction) { - return virt_to_abs(ptr) | BPA_DMA_VALID; + return virt_to_abs(ptr) | CELL_DMA_VALID; } -static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr, +static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction) { } -static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg, +static int cell_map_sg(struct device *hwdev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { int i; for (i = 0; i < nents; i++, sg++) { sg->dma_address = (page_to_phys(sg->page) + sg->offset) - | BPA_DMA_VALID; + | CELL_DMA_VALID; sg->dma_length = sg->length; } return nents; } -static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg, +static void cell_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { } -static int bpa_dma_supported(struct device *dev, u64 mask) +static int cell_dma_supported(struct device *dev, u64 mask) { return mask < 0x100000000ull; } -void bpa_init_iommu(void) +void cell_init_iommu(void) { - bpa_map_iommu(); + cell_map_iommu(); /* Direct I/O, IOMMU off */ ppc_md.iommu_dev_setup = iommu_dev_setup_null; ppc_md.iommu_bus_setup = iommu_bus_setup_null; - pci_dma_ops.alloc_coherent = bpa_alloc_coherent; - pci_dma_ops.free_coherent = bpa_free_coherent; - pci_dma_ops.map_single = bpa_map_single; - pci_dma_ops.unmap_single = bpa_unmap_single; - pci_dma_ops.map_sg = bpa_map_sg; - pci_dma_ops.unmap_sg = bpa_unmap_sg; - pci_dma_ops.dma_supported = bpa_dma_supported; + pci_dma_ops.alloc_coherent = cell_alloc_coherent; + pci_dma_ops.free_coherent = cell_free_coherent; + pci_dma_ops.map_single = cell_map_single; + pci_dma_ops.unmap_single = cell_unmap_single; + pci_dma_ops.map_sg = cell_map_sg; + pci_dma_ops.unmap_sg = cell_unmap_sg; + pci_dma_ops.dma_supported = cell_dma_supported; } diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/powerpc/platforms/cell/iommu.h index e547d77dfa04..490d77abfe85 100644 --- a/arch/ppc64/kernel/bpa_iommu.h +++ b/arch/powerpc/platforms/cell/iommu.h @@ -1,5 +1,5 @@ -#ifndef BPA_IOMMU_H -#define BPA_IOMMU_H +#ifndef CELL_IOMMU_H +#define CELL_IOMMU_H /* some constants */ enum { @@ -55,11 +55,11 @@ enum { /* The high bit needs to be set on every DMA address, only 2GB are addressable */ - BPA_DMA_VALID = 0x80000000, - BPA_DMA_MASK = 0x7fffffff, + CELL_DMA_VALID = 0x80000000, + CELL_DMA_MASK = 0x7fffffff, }; -void bpa_init_iommu(void); +void cell_init_iommu(void); #endif diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/powerpc/platforms/cell/setup.c index c2dc8f282eb8..9a495634d0c2 100644 --- a/arch/ppc64/kernel/bpa_setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -1,11 +1,11 @@ /* - * linux/arch/ppc/kernel/bpa_setup.c + * linux/arch/powerpc/platforms/cell/cell_setup.c * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) * Modified by PPC64 Team, IBM Corp - * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * Modified by Cell Team, IBM Deutschland Entwicklung GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -46,8 +46,8 @@ #include <asm/ppc-pci.h> #include <asm/irq.h> -#include "bpa_iic.h" -#include "bpa_iommu.h" +#include "interrupt.h" +#include "iommu.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -55,7 +55,7 @@ #define DBG(fmt...) #endif -void bpa_show_cpuinfo(struct seq_file *m) +void cell_show_cpuinfo(struct seq_file *m) { struct device_node *root; const char *model = ""; @@ -63,22 +63,22 @@ void bpa_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: BPA %s\n", model); + seq_printf(m, "machine\t\t: CHRP %s\n", model); of_node_put(root); } -static void bpa_progress(char *s, unsigned short hex) +static void cell_progress(char *s, unsigned short hex) { printk("*** %04x : %s\n", hex, s ? s : ""); } -static void __init bpa_setup_arch(void) +static void __init cell_setup_arch(void) { ppc_md.init_IRQ = iic_init_IRQ; ppc_md.get_irq = iic_get_irq; #ifdef CONFIG_SMP - smp_init_pSeries(); + smp_init_cell(); #endif /* init to some ~sane value until calibrate_delay() runs */ @@ -97,39 +97,39 @@ static void __init bpa_setup_arch(void) conswitchp = &dummy_con; #endif - bpa_nvram_init(); + mmio_nvram_init(); } /* * Early initialization. Relocation is on but do not reference unbolted pages */ -static void __init bpa_init_early(void) +static void __init cell_init_early(void) { - DBG(" -> bpa_init_early()\n"); + DBG(" -> cell_init_early()\n"); hpte_init_native(); - bpa_init_iommu(); + cell_init_iommu(); - ppc64_interrupt_controller = IC_BPA_IIC; + ppc64_interrupt_controller = IC_CELL_PIC; - DBG(" <- bpa_init_early()\n"); + DBG(" <- cell_init_early()\n"); } -static int __init bpa_probe(int platform) +static int __init cell_probe(int platform) { - if (platform != PLATFORM_BPA) + if (platform != PLATFORM_CELL) return 0; return 1; } -struct machdep_calls __initdata bpa_md = { - .probe = bpa_probe, - .setup_arch = bpa_setup_arch, - .init_early = bpa_init_early, - .show_cpuinfo = bpa_show_cpuinfo, +struct machdep_calls __initdata cell_md = { + .probe = cell_probe, + .setup_arch = cell_setup_arch, + .init_early = cell_init_early, + .show_cpuinfo = cell_show_cpuinfo, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, @@ -137,5 +137,5 @@ struct machdep_calls __initdata bpa_md = { .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, - .progress = bpa_progress, + .progress = cell_progress, }; diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c new file mode 100644 index 000000000000..de96eadf419d --- /dev/null +++ b/arch/powerpc/platforms/cell/smp.c @@ -0,0 +1,230 @@ +/* + * SMP support for BPA machines. + * + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/system.h> +#include <asm/rtas.h> + +#include "interrupt.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * The primary thread of each non-boot processor is recorded here before + * smp init. + */ +static cpumask_t of_spin_map; + +extern void pSeries_secondary_smp_init(unsigned long); + +/** + * smp_startup_cpu() - start the given cpu + * + * At boot time, there is nothing to do for primary threads which were + * started from Open Firmware. For anything else, call RTAS with the + * appropriate start location. + * + * Returns: + * 0 - failure + * 1 - success + */ +static inline int __devinit smp_startup_cpu(unsigned int lcpu) +{ + int status; + unsigned long start_here = __pa((u32)*((unsigned long *) + pSeries_secondary_smp_init)); + unsigned int pcpu; + int start_cpu; + + if (cpu_isset(lcpu, of_spin_map)) + /* Already started by OF and sitting in spin loop */ + return 1; + + pcpu = get_hard_smp_processor_id(lcpu); + + /* Fixup atomic count: it exited inside IRQ handler. */ + paca[lcpu].__current->thread_info->preempt_count = 0; + + /* + * If the RTAS start-cpu token does not exist then presume the + * cpu is already spinning. + */ + start_cpu = rtas_token("start-cpu"); + if (start_cpu == RTAS_UNKNOWN_SERVICE) + return 1; + + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); + if (status != 0) { + printk(KERN_ERR "start-cpu failed: %i\n", status); + return 0; + } + + return 1; +} + +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase = 0; + +static void __devinit cell_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +static void __devinit cell_take_timebase(void) +{ + while (!timebase) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); +} + +static void __devinit smp_cell_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + if (!smp_startup_cpu(nr)) + return; + + /* + * The processor is currently spinning, waiting for the + * cpu_start field to become non-zero After we set cpu_start, + * the processor will continue on to secondary_start + */ + paca[nr].cpu_start = 1; +} + +static int smp_cell_cpu_bootable(unsigned int nr) +{ + /* Special case - we inhibit secondary thread startup + * during boot if the user requests it. Odd-numbered + * cpus are assumed to be secondary threads. + */ + if (system_state < SYSTEM_RUNNING && + cpu_has_feature(CPU_FTR_SMT) && + !smt_enabled_at_boot && nr % 2 != 0) + return 0; + + return 1; +} +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_cell_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_cell_cpu_bootable, +}; + +/* This is called very early */ +void __init smp_init_cell(void) +{ + int i; + + DBG(" -> smp_init_cell()\n"); + + smp_ops = &bpa_iic_smp_ops; + + /* Mark threads which are still spinning in hold loops. */ + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { + if (i % 2 == 0) + /* + * Even-numbered logical cpus correspond to + * primary threads. + */ + cpu_set(i, of_spin_map); + } + } else { + of_spin_map = cpu_present_map; + } + + cpu_clear(boot_cpuid, of_spin_map); + + /* Non-lpar has additional take/give timebase */ + if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { + smp_ops->give_timebase = cell_give_timebase; + smp_ops->take_timebase = cell_take_timebase; + } + + DBG(" <- smp_init_cell()\n"); +} diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index d5c9a02fb119..e74132188bdf 100644 --- a/arch/ppc64/kernel/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -27,7 +27,7 @@ #include <asm/prom.h> #include <asm/io.h> -#include "bpa_iic.h" +#include "interrupt.h" /* register layout taken from Spider spec, table 7.4-4 */ enum { diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index 4ac7125aa09c..150f67d6f90c 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -17,6 +17,7 @@ #include <asm/uaccess.h> #include <asm/prom.h> #include <asm/machdep.h> +#include <asm/rtas.h> #include "chrp.h" static unsigned int nvram_size; @@ -25,7 +26,8 @@ static DEFINE_SPINLOCK(nvram_lock); static unsigned char chrp_nvram_read(int addr) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; unsigned char ret; if (addr >= nvram_size) { @@ -34,7 +36,8 @@ static unsigned char chrp_nvram_read(int addr) return 0xff; } spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) ret = 0xff; else ret = nvram_buf[0]; @@ -45,7 +48,8 @@ static unsigned char chrp_nvram_read(int addr) static void chrp_nvram_write(int addr, unsigned char val) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; if (addr >= nvram_size) { printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", @@ -54,7 +58,8 @@ static void chrp_nvram_write(int addr, unsigned char val) } spin_lock_irqsave(&nvram_lock, flags); nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); spin_unlock_irqrestore(&nvram_lock, flags); } diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index a9052305c35d..29c86781c493 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/device.h> +#include <linux/platform_device.h> #include <linux/mv643xx.h> #include <linux/pci.h> diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 31ee49c25014..bb2315997d45 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -35,43 +35,6 @@ #include <asm/smp.h> #include <asm/mpic.h> -extern unsigned long smp_chrp_cpu_nr; - -static int __init smp_chrp_probe(void) -{ - struct device_node *cpus = NULL; - unsigned int *reg; - int reglen; - int ncpus = 0; - int cpuid; - unsigned int phys; - - /* Count CPUs in the device-tree */ - cpuid = 1; /* the boot cpu is logical cpu 0 */ - while ((cpus = of_find_node_by_type(cpus, "cpu")) != NULL) { - phys = ncpus; - reg = (unsigned int *) get_property(cpus, "reg", ®len); - if (reg && reglen >= sizeof(unsigned int)) - /* hmmm, not having a reg property would be bad */ - phys = *reg; - if (phys != boot_cpuid_phys) { - set_hard_smp_processor_id(cpuid, phys); - ++cpuid; - } - ++ncpus; - } - - printk(KERN_INFO "CHRP SMP probe found %d cpus\n", ncpus); - - /* Nothing more to do if less than 2 of them */ - if (ncpus <= 1) - return 1; - - mpic_request_ipis(); - - return ncpus; -} - static void __devinit smp_chrp_kick_cpu(int nr) { *(unsigned long *)KERNELBASE = nr; @@ -114,7 +77,7 @@ void __devinit smp_chrp_take_timebase(void) /* CHRP with openpic */ struct smp_ops_t chrp_smp_ops = { .message_pass = smp_mpic_message_pass, - .probe = smp_chrp_probe, + .probe = smp_mpic_probe, .kick_cpu = smp_chrp_kick_cpu, .setup_cpu = smp_chrp_setup_cpu, .give_timebase = smp_chrp_give_timebase, diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h index 321f3bb7a8f5..a843b0f87b72 100644 --- a/arch/powerpc/platforms/iseries/call_hpt.h +++ b/arch/powerpc/platforms/iseries/call_hpt.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #include <asm/mmu.h> #define HvCallHptGetHptAddress HvCallHpt + 0 diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h index a86e065b9577..59d4e0ad5cf3 100644 --- a/arch/powerpc/platforms/iseries/call_pci.h +++ b/arch/powerpc/platforms/iseries/call_pci.h @@ -25,8 +25,8 @@ #ifndef _PLATFORMS_ISERIES_CALL_PCI_H #define _PLATFORMS_ISERIES_CALL_PCI_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> /* * DSA == Direct Select Address diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h index ef223166cf22..c7e251619f48 100644 --- a/arch/powerpc/platforms/iseries/call_sm.h +++ b/arch/powerpc/platforms/iseries/call_sm.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #define HvCallSmGet64BitsOfAccessMap HvCallSm + 11 diff --git a/arch/powerpc/platforms/iseries/hvlog.c b/arch/powerpc/platforms/iseries/hvlog.c index f61e2e9ac9ec..62ec73479687 100644 --- a/arch/powerpc/platforms/iseries/hvlog.c +++ b/arch/powerpc/platforms/iseries/hvlog.c @@ -9,9 +9,9 @@ #include <asm/page.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCall.h> -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> void HvCall_writeLogBuffer(const void *buffer, u64 len) diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c index dc28621aea0d..663a1affb4bb 100644 --- a/arch/powerpc/platforms/iseries/hvlpconfig.c +++ b/arch/powerpc/platforms/iseries/hvlpconfig.c @@ -17,7 +17,7 @@ */ #include <linux/module.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> HvLpIndex HvLpConfig_getLpIndex_outline(void) { diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index 1db26d8be640..1a6845b5c5a4 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -32,7 +32,7 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_call_xm.h> extern struct list_head iSeries_Global_Device_List; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 937ac99b9d33..c1135912cc05 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -36,9 +36,9 @@ #include <linux/spinlock.h> #include <asm/ppcdebug.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_xm.h> #include "irq.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c index f271b3539721..a2200842f4e5 100644 --- a/arch/powerpc/platforms/iseries/ksyms.c +++ b/arch/powerpc/platforms/iseries/ksyms.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <asm/hw_irq.h> -#include <asm/iSeries/HvCallSc.h> +#include <asm/iseries/hv_call_sc.h> EXPORT_SYMBOL(HvCall0); EXPORT_SYMBOL(HvCall1); diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index ed2ffee6f731..bb8c91537f35 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -13,16 +13,16 @@ #include <linux/bitops.h> #include <asm/processor.h> #include <asm/ptrace.h> -#include <asm/naca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpRegSave.h> +#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> -#include <asm/iSeries/LparMap.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/lpar_map.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/it_lp_queue.h> +#include "naca.h" #include "vpd_areas.h" #include "spcomm_area.h" #include "ipl_parms.h" diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 54c7753dbe05..e9fb98bf895f 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -17,10 +17,10 @@ #include <asm/system.h> #include <asm/paca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/it_lp_naca.h> /* * The LpQueue is used to pass event data from the hypervisor to diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index e5de31aa0015..49e7e4b85847 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -38,10 +38,10 @@ #include <asm/uaccess.h> #include <asm/paca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/it_lp_queue.h> #include "setup.h" diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h new file mode 100644 index 000000000000..ab2372eb8d2e --- /dev/null +++ b/arch/powerpc/platforms/iseries/naca.h @@ -0,0 +1,24 @@ +#ifndef _PLATFORMS_ISERIES_NACA_H +#define _PLATFORMS_ISERIES_NACA_H + +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/types.h> + +struct naca_struct { + /* Kernel only data - undefined for user space */ + void *xItVpdAreas; /* VPD Data 0x00 */ + void *xRamDisk; /* iSeries ramdisk 0x08 */ + u64 xRamDiskSize; /* In pages 0x10 */ +}; + +extern struct naca_struct naca; + +#endif /* _PLATFORMS_ISERIES_NACA_H */ diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 959e59fd9c11..7d7d5884343f 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -36,8 +36,8 @@ #include <asm/iommu.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/mf.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/mf.h> #include <asm/ppc-pci.h> diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index 6f1929cac66b..e68b6b5fa89f 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -24,8 +24,8 @@ #include <asm/processor.h> #include <asm/time.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #include "processor_vpd.h" #include "main_store.h" diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h index c68b9c3e5caf..66189fd2e32d 100644 --- a/arch/powerpc/platforms/iseries/release_data.h +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -24,7 +24,7 @@ * address of the OS's NACA). */ #include <asm/types.h> -#include <asm/naca.h> +#include "naca.h" /* * When we IPL a secondary partition, we will check if if the diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 1544c6f10a38..fda712b42168 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -27,6 +27,7 @@ #include <linux/kdev_t.h> #include <linux/major.h> #include <linux/root_dev.h> +#include <linux/kernel.h> #include <asm/processor.h> #include <asm/machdep.h> @@ -40,19 +41,19 @@ #include <asm/firmware.h> #include <asm/time.h> -#include <asm/naca.h> #include <asm/paca.h> #include <asm/cache.h> #include <asm/sections.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/LparMap.h> - +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/lpar_map.h> + +#include "naca.h" #include "setup.h" #include "irq.h" #include "vpd_areas.h" @@ -94,6 +95,8 @@ extern unsigned long iSeries_recal_titan; static int mf_initialized; +static unsigned long cmd_mem_limit; + struct MemoryBlock { unsigned long absStart; unsigned long absEnd; @@ -341,23 +344,6 @@ static void __init iSeries_init_early(void) */ iommu_init_early_iSeries(); - iSeries_get_cmdline(); - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - - /* Parse early parameters, in particular mem=x */ - parse_early_param(); - - if (memory_limit) { - if (memory_limit < systemcfg->physicalMemorySize) - systemcfg->physicalMemorySize = memory_limit; - else { - printk("Ignoring mem=%lu >= ram_top.\n", memory_limit); - memory_limit = 0; - } - } - /* Initialize machine-dependency vectors */ #ifdef CONFIG_SMP smp_init_iSeries(); @@ -971,6 +957,8 @@ void build_flat_dt(struct iseries_flat_dt *dt) /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + if (cmd_mem_limit) + dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); dt_cpus(dt); @@ -990,7 +978,27 @@ void * __init iSeries_early_setup(void) */ build_iSeries_Memory_Map(); + iSeries_get_cmdline(); + + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + + /* Parse early parameters, in particular mem=x */ + parse_early_param(); + build_flat_dt(&iseries_dt); return (void *) __pa(&iseries_dt); } + +/* + * On iSeries we just parse the mem=X option from the command line. + * On pSeries it's a bit more complicated, see prom_init_mem() + */ +static int __init early_parsemem(char *p) +{ + if (p) + cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE); + return 0; +} +early_param("mem", early_parsemem); diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index f720916682f6..3336bad67724 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -38,7 +38,7 @@ #include <asm/io.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> #include <asm/time.h> #include <asm/ppcdebug.h> #include <asm/machdep.h> diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index c0f7d2e9153f..c27a66876c2c 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -17,10 +17,10 @@ #include <asm/tce.h> #include <asm/abs_addr.h> #include <asm/page.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_xm.h> struct device *iSeries_vio_dev = &vio_bus_device.dev; EXPORT_SYMBOL(iSeries_vio_dev); diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index c0c767bd37f1..fe97bfbf7463 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -41,12 +41,12 @@ #include <asm/system.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/vio.h> /* Status of the path to each other partition in the system. * This is overkill, since we will only ever establish connections diff --git a/arch/powerpc/platforms/iseries/vpdinfo.c b/arch/powerpc/platforms/iseries/vpdinfo.c index 9c318849dee7..23a6d1e5b429 100644 --- a/arch/powerpc/platforms/iseries/vpdinfo.c +++ b/arch/powerpc/platforms/iseries/vpdinfo.c @@ -32,7 +32,7 @@ #include <asm/resource.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_types.h> #include "pci.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 0037a8c8c81f..83a49e80ac29 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -576,7 +576,7 @@ void __init pmac_pic_init(void) #endif /* CONFIG_PPC32 */ } -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) /* * These procedures are used in implementing sleep on the powerbooks. * sleep_save_intrs() saves the states of all interrupt enables @@ -643,7 +643,7 @@ static int pmacpic_resume(struct sys_device *sysdev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ static struct sysdev_class pmacpic_sysclass = { set_kset_name("pmac_pic"), @@ -655,10 +655,10 @@ static struct sys_device device_pmacpic = { }; static struct sysdev_driver driver_pmacpic = { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) .suspend = &pmacpic_suspend, .resume = &pmacpic_resume, -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ }; static int __init init_pmacpic_sysfs(void) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 6f62af597291..80b58c1ec412 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -75,6 +75,7 @@ #include <asm/smu.h> #include <asm/pmc.h> #include <asm/mpic.h> +#include <asm/lmb.h> #include "pmac.h" @@ -350,7 +351,7 @@ void __init pmac_setup_arch(void) find_via_pmu(); smu_init(); -#ifdef CONFIG_NVRAM +#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) pmac_nvram_init(); #endif diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 2d57f588151d..e3fc3407bb1f 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -21,15 +21,6 @@ config EEH depends on PPC_PSERIES default y if !EMBEDDED -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - config SCANLOG tristate "Scanlog dump interface" depends on RTAS_PROC && PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 5ef494e3a70f..b9938fece781 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,5 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o rtas-fw.o ras.o + setup.o iommu.o ras.o rtasd.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 9e90d41131d8..513e27231493 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -42,13 +42,14 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/abs_addr.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/systemcfg.h> #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> +#include "plpar_wrappers.h" + #define DBG(fmt...) extern int is_python(struct device_node *); @@ -498,7 +499,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case PSERIES_RECONFIG_REMOVE: - if (pci->iommu_table && + if (pci && pci->iommu_table && get_property(np, "ibm,dma-window", NULL)) iommu_free_table(np); break; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 268d8362dde7..e384a5a91796 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -38,7 +38,8 @@ #include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/cputable.h> -#include <asm/plpar_wrappers.h> + +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -260,22 +261,18 @@ out: void vpa_init(int cpu) { int hwcpu = get_hard_smp_processor_id(cpu); - unsigned long vpa = (unsigned long)&(paca[cpu].lppaca); + unsigned long vpa = __pa(&paca[cpu].lppaca); long ret; - unsigned long flags; - - /* Register the Virtual Processor Area (VPA) */ - flags = 1UL << (63 - 18); if (cpu_has_feature(CPU_FTR_ALTIVEC)) paca[cpu].lppaca.vmxregs_in_use = 1; - ret = register_vpa(flags, hwcpu, __pa(vpa)); + ret = register_vpa(hwcpu, vpa); if (ret) printk(KERN_ERR "WARNING: vpa_init: VPA registration for " "cpu %d (hw %d) of area %lx returns %ld\n", - cpu, hwcpu, __pa(vpa), ret); + cpu, hwcpu, vpa, ret); } long pSeries_lpar_hpte_insert(unsigned long hpte_group, diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h new file mode 100644 index 000000000000..382f8c5b0e7c --- /dev/null +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -0,0 +1,120 @@ +#ifndef _PSERIES_PLPAR_WRAPPERS_H +#define _PSERIES_PLPAR_WRAPPERS_H + +#include <asm/hvcall.h> + +static inline long poll_pending(void) +{ + unsigned long dummy; + return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0, &dummy, &dummy, &dummy); +} + +static inline long prod_processor(void) +{ + plpar_hcall_norets(H_PROD); + return 0; +} + +static inline long cede_processor(void) +{ + plpar_hcall_norets(H_CEDE); + return 0; +} + +static inline long vpa_call(unsigned long flags, unsigned long cpu, + unsigned long vpa) +{ + /* flags are in bits 16-18 (counting from most significant bit) */ + flags = flags << (63 - 18); + + return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); +} + +static inline long unregister_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x5, cpu, vpa); +} + +static inline long register_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x1, cpu, vpa); +} + +extern void vpa_init(int cpu); + +static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex, + unsigned long avpn, unsigned long *old_pteh_ret, + unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_read(unsigned long flags, unsigned long ptex, + unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_READ, flags, ptex, 0, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex, + unsigned long avpn) +{ + return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn); +} + +static inline long plpar_tce_get(unsigned long liobn, unsigned long ioba, + unsigned long *tce_ret) +{ + unsigned long dummy; + return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0, tce_ret, &dummy, + &dummy); +} + +static inline long plpar_tce_put(unsigned long liobn, unsigned long ioba, + unsigned long tceval) +{ + return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval); +} + +static inline long plpar_tce_put_indirect(unsigned long liobn, + unsigned long ioba, unsigned long page, unsigned long count) +{ + return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count); +} + +static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba, + unsigned long tceval, unsigned long count) +{ + return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count); +} + +static inline long plpar_get_term_char(unsigned long termno, + unsigned long *len_ret, char *buf_ret) +{ + unsigned long *lbuf = (unsigned long *)buf_ret; /* TODO: alignment? */ + return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0, len_ret, + lbuf + 0, lbuf + 1); +} + +static inline long plpar_put_term_char(unsigned long termno, unsigned long len, + const char *buffer) +{ + unsigned long *lbuf = (unsigned long *)buffer; /* TODO: alignment? */ + return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0], + lbuf[1]); +} + +static inline long plpar_set_xdabr(unsigned long address, unsigned long flags) +{ + return plpar_hcall_norets(H_SET_XDABR, address, flags); +} + +static inline long plpar_set_dabr(unsigned long val) +{ + return plpar_hcall_norets(H_SET_DABR, val); +} + +#endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c deleted file mode 100644 index 15d81d758ca0..000000000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * - * Procedures for firmware flash updates on pSeries systems. - * - * Peter Bergner, IBM March 2001. - * Copyright (C) 2001 IBM. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <stdarg.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/semaphore.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/param.h> -#include <asm/system.h> -#include <asm/abs_addr.h> -#include <asm/udbg.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#include <asm/systemcfg.h> - -#include "rtas-fw.h" - -struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; - -#define FLASH_BLOCK_LIST_VERSION (1UL) - -static void rtas_flash_firmware(void) -{ - unsigned long image_size; - struct flash_block_list *f, *next, *flist; - unsigned long rtas_block_list; - int i, status, update_token; - - update_token = rtas_token("ibm,update-flash-64-and-reboot"); - if (update_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); - printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); - return; - } - - /* NOTE: the "first" block list is a global var with no data - * blocks in the kernel data segment. We do this because - * we want to ensure this block_list addr is under 4GB. - */ - rtas_firmware_flash_list.num_blocks = 0; - flist = (struct flash_block_list *)&rtas_firmware_flash_list; - rtas_block_list = virt_to_abs(flist); - if (rtas_block_list >= 4UL*1024*1024*1024) { - printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); - return; - } - - printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); - /* Update the block_list in place. */ - image_size = 0; - for (f = flist; f; f = next) { - /* Translate data addrs to absolute */ - for (i = 0; i < f->num_blocks; i++) { - f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); - image_size += f->blocks[i].length; - } - next = f->next; - /* Don't translate NULL pointer for last entry */ - if (f->next) - f->next = (struct flash_block_list *)virt_to_abs(f->next); - else - f->next = NULL; - /* make num_blocks into the version/length field */ - f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); - } - - printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); - printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - rtas_progress("Flashing \n", 0x0); - rtas_progress("Please Wait... ", 0x0); - printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); - status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); - switch (status) { /* should only get "bad" status */ - case 0: - printk(KERN_ALERT "FLASH: success\n"); - break; - case -1: - printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); - break; - case -3: - printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); - break; - case -4: - printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); - break; - default: - printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); - break; - } -} - -void rtas_flash_bypass_warning(void) -{ - printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); - printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); -} - - -void rtas_fw_restart(char *cmd) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_firmware(); - rtas_restart(cmd); -} - -void rtas_fw_power_off(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_power_off(); -} - -void rtas_fw_halt(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_halt(); -} - -EXPORT_SYMBOL(rtas_firmware_flash_list); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h deleted file mode 100644 index e70fa69974a3..000000000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.h +++ /dev/null @@ -1,3 +0,0 @@ -void rtas_fw_restart(char *cmd); -void rtas_fw_power_off(void); -void rtas_fw_halt(void); diff --git a/arch/ppc64/kernel/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e26b0420b6dd..e26b0420b6dd 100644 --- a/arch/ppc64/kernel/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 10cb0f2d9b5b..65bee939eecc 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -58,7 +58,6 @@ #include <asm/irq.h> #include <asm/time.h> #include <asm/nvram.h> -#include <asm/plpar_wrappers.h> #include "xics.h" #include <asm/firmware.h> #include <asm/pmc.h> @@ -67,7 +66,7 @@ #include <asm/i8259.h> #include <asm/udbg.h> -#include "rtas-fw.h" +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -352,6 +351,16 @@ static void pSeries_mach_cpu_die(void) for(;;); } +static int pseries_set_dabr(unsigned long dabr) +{ + if (firmware_has_feature(FW_FEATURE_XDABR)) { + /* We want to catch accesses from kernel and userspace */ + return plpar_set_xdabr(dabr, H_DABRX_KERNEL | H_DABRX_USER); + } + + return plpar_set_dabr(dabr); +} + /* * Early initialization. Relocation is on but do not reference unbolted pages @@ -387,6 +396,8 @@ static void __init pSeries_init_early(void) DBG("Hello World !\n"); } + if (firmware_has_feature(FW_FEATURE_XDABR | FW_FEATURE_DABR)) + ppc_md.set_dabr = pseries_set_dabr; iommu_init_early_pSeries(); @@ -591,9 +602,9 @@ struct machdep_calls __initdata pSeries_md = { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .irq_bus_setup = pSeries_irq_bus_setup, - .restart = rtas_fw_restart, - .power_off = rtas_fw_power_off, - .halt = rtas_fw_halt, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, .get_boot_time = rtas_get_boot_time, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 9c9458ddfc25..7a243e8ccd7e 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -44,10 +44,11 @@ #include <asm/firmware.h> #include <asm/system.h> #include <asm/rtas.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> +#include "plpar_wrappers.h" + #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 8acd21dee05d..6b7efcfc352a 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += u3_iommu.o +obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h new file mode 100644 index 000000000000..ea8f0d9eed8a --- /dev/null +++ b/arch/powerpc/sysdev/dart.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _POWERPC_SYSDEV_DART_H +#define _POWERPC_SYSDEV_DART_H + + +/* physical base of DART registers */ +#define DART_BASE 0xf8033000UL + +/* Offset from base to control register */ +#define DARTCNTL 0 +/* Offset from base to exception register */ +#define DARTEXCP 0x10 +/* Offset from base to TLB tag registers */ +#define DARTTAG 0x1000 + + +/* Control Register fields */ + +/* base address of table (pfn) */ +#define DARTCNTL_BASE_MASK 0xfffff +#define DARTCNTL_BASE_SHIFT 12 + +#define DARTCNTL_FLUSHTLB 0x400 +#define DARTCNTL_ENABLE 0x200 + +/* size of table in pages */ +#define DARTCNTL_SIZE_MASK 0x1ff +#define DARTCNTL_SIZE_SHIFT 0 + + +/* DART table fields */ + +#define DARTMAP_VALID 0x80000000 +#define DARTMAP_RPNMASK 0x00ffffff + + +#define DART_PAGE_SHIFT 12 +#define DART_PAGE_SIZE (1 << DART_PAGE_SHIFT) +#define DART_PAGE_FACTOR (PAGE_SHIFT - DART_PAGE_SHIFT) + + +#endif /* _POWERPC_SYSDEV_DART_H */ diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c index 06a119cfceb5..74e0d31a3559 100644 --- a/arch/ppc64/kernel/bpa_nvram.c +++ b/arch/powerpc/sysdev/mmio_nvram.c @@ -1,5 +1,5 @@ /* - * NVRAM for CPBW + * memory mapped NVRAM * * (C) Copyright IBM Corp. 2005 * @@ -30,54 +30,54 @@ #include <asm/nvram.h> #include <asm/prom.h> -static void __iomem *bpa_nvram_start; -static long bpa_nvram_len; -static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED; +static void __iomem *mmio_nvram_start; +static long mmio_nvram_len; +static spinlock_t mmio_nvram_lock = SPIN_LOCK_UNLOCKED; -static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index) +static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index) { unsigned long flags; - if (*index >= bpa_nvram_len) + if (*index >= mmio_nvram_len) return 0; - if (*index + count > bpa_nvram_len) - count = bpa_nvram_len - *index; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; - spin_lock_irqsave(&bpa_nvram_lock, flags); + spin_lock_irqsave(&mmio_nvram_lock, flags); - memcpy_fromio(buf, bpa_nvram_start + *index, count); + memcpy_fromio(buf, mmio_nvram_start + *index, count); - spin_unlock_irqrestore(&bpa_nvram_lock, flags); + spin_unlock_irqrestore(&mmio_nvram_lock, flags); *index += count; return count; } -static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index) +static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) { unsigned long flags; - if (*index >= bpa_nvram_len) + if (*index >= mmio_nvram_len) return 0; - if (*index + count > bpa_nvram_len) - count = bpa_nvram_len - *index; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; - spin_lock_irqsave(&bpa_nvram_lock, flags); + spin_lock_irqsave(&mmio_nvram_lock, flags); - memcpy_toio(bpa_nvram_start + *index, buf, count); + memcpy_toio(mmio_nvram_start + *index, buf, count); - spin_unlock_irqrestore(&bpa_nvram_lock, flags); + spin_unlock_irqrestore(&mmio_nvram_lock, flags); *index += count; return count; } -static ssize_t bpa_nvram_get_size(void) +static ssize_t mmio_nvram_get_size(void) { - return bpa_nvram_len; + return mmio_nvram_len; } -int __init bpa_nvram_init(void) +int __init mmio_nvram_init(void) { struct device_node *nvram_node; unsigned long *buffer; @@ -97,20 +97,20 @@ int __init bpa_nvram_init(void) ret = -ENODEV; nvram_addr = buffer[0]; - bpa_nvram_len = buffer[1]; - if ( (!bpa_nvram_len) || (!nvram_addr) ) + mmio_nvram_len = buffer[1]; + if ( (!mmio_nvram_len) || (!nvram_addr) ) goto out; - bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len); - if (!bpa_nvram_start) + mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len); + if (!mmio_nvram_start) goto out; - printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n", - bpa_nvram_len >> 10, bpa_nvram_start); + printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n", + mmio_nvram_len >> 10, mmio_nvram_start); - ppc_md.nvram_read = bpa_nvram_read; - ppc_md.nvram_write = bpa_nvram_write; - ppc_md.nvram_size = bpa_nvram_get_size; + ppc_md.nvram_read = mmio_nvram_read; + ppc_md.nvram_write = mmio_nvram_write; + ppc_md.nvram_size = mmio_nvram_get_size; out: of_node_put(nvram_node); diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index fba871a1bda5..607722178c1a 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -1,5 +1,5 @@ /* - * arch/ppc64/kernel/u3_iommu.c + * arch/powerpc/sysdev/u3_iommu.c * * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation * @@ -44,9 +44,10 @@ #include <asm/abs_addr.h> #include <asm/cacheflush.h> #include <asm/lmb.h> -#include <asm/dart.h> #include <asm/ppc-pci.h> +#include "dart.h" + extern int iommu_force_on; /* Physical base address and size of the DART table */ diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index b42789f8eb76..579cd40258b9 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -388,9 +388,8 @@ void m8xx_cpm_dpinit(void) /* * Allocate the requested size worth of DP memory. - * This function used to return an index into the DPRAM area. - * Now it returns the actuall physical address of that area. - * use m8xx_cpm_dpram_offset() to get the index + * This function returns an offset into the DPRAM area. + * Use cpm_dpram_addr() to get the virtual address of the area. */ uint cpm_dpalloc(uint size, uint align) { diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 94d5716fa7c3..e719a4933af1 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -66,7 +66,8 @@ head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ arch/ppc/platforms/ \ arch/ppc/mm/ arch/ppc/lib/ \ - arch/ppc/syslib/ arch/powerpc/sysdev/ + arch/ppc/syslib/ arch/powerpc/sysdev/ \ + arch/powerpc/lib/ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index b35346df1e37..c610ca933a25 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o diff --git a/arch/ppc/kernel/bitops.c b/arch/ppc/kernel/bitops.c deleted file mode 100644 index 7f53d193968b..000000000000 --- a/arch/ppc/kernel/bitops.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ - -#include <linux/kernel.h> -#include <linux/bitops.h> - -/* - * If the bitops are not inlined in bitops.h, they are defined here. - * -- paulus - */ -#if !__INLINE_BITOPS -void set_bit(int nr, volatile void * addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - or %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc" ); -} - -void clear_bit(int nr, volatile void *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - andc %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -void change_bit(int nr, volatile void *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - xor %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -int test_and_set_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - or %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} - -int test_and_clear_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - andc %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} - -int test_and_change_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - xor %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} -#endif /* !__INLINE_BITOPS */ diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c index 772e428aaa59..fbb2b9f8922c 100644 --- a/arch/ppc/kernel/irq.c +++ b/arch/ppc/kernel/irq.c @@ -126,7 +126,7 @@ skip: seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); } #endif -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) /* should this be per processor send/receive? */ seq_printf(p, "IPI (recv/sent): %10u/%u\n", atomic_read(&ipi_recv), atomic_read(&ipi_sent)); diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c index a72787747df7..a882b0dbe8de 100644 --- a/arch/ppc/kernel/machine_kexec.c +++ b/arch/ppc/kernel/machine_kexec.c @@ -32,7 +32,7 @@ const extern unsigned int relocate_new_kernel_size; * Provide a dummy crash_notes definition while crash dump arrives to ppc. * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. */ -void *crash_notes = NULL; +note_buf_t crash_notes[NR_CPUS]; void machine_shutdown(void) { diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index ae24196d78f6..e0ca61b37f4f 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -131,6 +131,11 @@ EXPORT_SYMBOL(outw); EXPORT_SYMBOL(outl); EXPORT_SYMBOL(outsl);*/ +EXPORT_SYMBOL(__ide_mm_insl); +EXPORT_SYMBOL(__ide_mm_outsw); +EXPORT_SYMBOL(__ide_mm_insw); +EXPORT_SYMBOL(__ide_mm_outsl); + EXPORT_SYMBOL(_insb); EXPORT_SYMBOL(_outsb); EXPORT_SYMBOL(_insw); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f265b81e7008..16adde6b429d 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -606,22 +606,22 @@ int check_bug_trap(struct pt_regs *regs) if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ #ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", + xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); #endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } #ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); xmon(regs); #endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 97ffbc70574f..1cc3abe6fa43 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -45,6 +45,7 @@ #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/xmon.h> +#include <asm/ppc_sys.h> #include "ppc8xx_pic.h" diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 42677cc96508..b987164fca4c 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -89,12 +89,14 @@ config PPC_PMAC bool " Apple G5 based machines" default y select U3_DART + select GENERIC_TBSYNC config PPC_MAPLE depends on PPC_MULTIPLATFORM bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. @@ -182,6 +184,9 @@ config MPIC_BROKEN_U3 depends on PPC_MAPLE default y +config GENERIC_TBSYNC + def_bool n + config PPC_PMAC64 bool depends on PPC_PMAC diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index fdbd6f44adc0..a55a82d145d4 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -86,7 +86,6 @@ head-y := arch/ppc64/kernel/head.o head-y += arch/powerpc/kernel/fpu.o head-y += arch/powerpc/kernel/entry_64.o -libs-y += arch/ppc64/lib/ core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ core-y += arch/powerpc/mm/ core-y += arch/powerpc/sysdev/ diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 327c08ce4291..c441aebe7648 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -12,8 +12,7 @@ obj-y := misc.o prom.o endif obj-y += irq.o idle.o dma.o \ - signal.o \ - align.o bitops.o pacaData.o \ + align.o pacaData.o \ udbg.o ioctl32.o \ rtc.o \ cpu_setup_power4.o \ @@ -29,22 +28,16 @@ ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o endif -obj-$(CONFIG_PPC_PSERIES) += rtasd.o udbg_16550.o - -obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ - bpa_iic.o spider-pic.o +obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_KEXEC) += machine_kexec.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o -obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o -obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_MODULES) += ppc_ksyms.o endif obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o @@ -57,11 +50,6 @@ obj-$(CONFIG_PPC_PMAC) += udbg_scc.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o -ifdef CONFIG_SMP -obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o -obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o -endif - obj-$(CONFIG_KPROBES) += kprobes.o CFLAGS_ioctl32.o += -Ifs/ diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index 5e6046cb414e..504dee836d29 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -31,7 +31,7 @@ #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/rtas.h> #include <asm/cputable.h> #include <asm/cache.h> diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 929f9f42cf7a..db1cf397be2d 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -35,7 +35,7 @@ #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -1914,24 +1914,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index f41afe545045..87474584033f 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -52,7 +52,7 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/it_lp_queue.h> #include <asm/machdep.h> #include <asm/paca.h> @@ -392,7 +392,7 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ - if (ppc64_interrupt_controller == IC_BPA_IIC) + if (ppc64_interrupt_controller == IC_CELL_PIC) return real_irq; /* no mapping for iic either */ /* don't map interrupts < MIN_VIRT_IRQ */ diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index cae19bbd5acd..e86155770bbc 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -26,14 +26,14 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> #include <asm/lppaca.h> #include <asm/hvcall.h> #include <asm/firmware.h> #include <asm/rtas.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/iseries/it_exp_vpd_panel.h> #include <asm/prom.h> #define MODULE_VERS "1.6" diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c index bf7cc4f8210f..ff8679f260f3 100644 --- a/arch/ppc64/kernel/machine_kexec.c +++ b/arch/ppc64/kernel/machine_kexec.c @@ -244,7 +244,6 @@ static void kexec_prepare_cpus(void) static void kexec_prepare_cpus(void) { - extern void smp_release_cpus(void); /* * move the secondarys to us so that we can copy * the new kernel 0-0x100 safely diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c index 33a2d8db3f21..5e27e5a6a35d 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/ppc64/kernel/pacaData.c @@ -17,7 +17,7 @@ #include <asm/page.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> static union { diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index 493bbe43f5b4..1a443a7ada4c 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -181,13 +181,14 @@ EXPORT_SYMBOL(fetch_dev_dn); static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) { struct device_node *np = node; - struct pci_dn *pci; + struct pci_dn *pci = NULL; int err = NOTIFY_OK; switch (action) { case PSERIES_RECONFIG_ADD: pci = np->parent->data; - update_dn_pci_info(np, pci->phb); + if (pci) + update_dn_pci_info(np, pci->phb); break; default: err = NOTIFY_DONE; diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index a87c66a9652a..24e955ee9487 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) + if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_CELL))) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 69924ba4d7d9..a4bbca6dbb8b 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1939,9 +1939,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_send_capabilities(); /* - * On pSeries and BPA, copy the CPU hold code + * On pSeries and Cell, copy the CPU hold code */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/ppc64/kernel/udbg_scc.c index c47fd6c63531..820c53551507 100644 --- a/arch/ppc64/kernel/udbg_scc.c +++ b/arch/ppc64/kernel/udbg_scc.c @@ -12,7 +12,6 @@ #include <linux/types.h> #include <asm/udbg.h> #include <asm/processor.h> -#include <asm/naca.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/pmac_feature.h> diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile deleted file mode 100644 index 42d5295bf345..000000000000 --- a/arch/ppc64/lib/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for ppc64-specific library files.. -# - -lib-y := string.o diff --git a/arch/ppc64/lib/string.S b/arch/ppc64/lib/string.S deleted file mode 100644 index e21a0038a4d6..000000000000 --- a/arch/ppc64/lib/string.S +++ /dev/null @@ -1,179 +0,0 @@ -/* - * String handling functions for PowerPC. - * - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/processor.h> -#include <asm/errno.h> -#include <asm/ppc_asm.h> - -_GLOBAL(strcpy) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - -_GLOBAL(strncpy) - cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - blr - -_GLOBAL(strcat) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r5) - cmpwi 0,r0,0 - bne 1b - addi r5,r5,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - -_GLOBAL(strcmp) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r5) - cmpwi 1,r3,0 - lbzu r0,1(r4) - subf. r3,r0,r3 - beqlr 1 - beq 1b - blr - -_GLOBAL(strlen) - addi r4,r3,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - bne 1b - subf r3,r3,r4 - blr - -_GLOBAL(memcmp) - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r6) - lbzu r0,1(r4) - subf. r3,r0,r3 - bdnzt 2,1b - blr -2: li r3,0 - blr - -_GLOBAL(memchr) - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r3,r3,-1 -1: lbzu r0,1(r3) - cmpw 0,r0,r4 - bdnzf 2,1b - beqlr -2: li r3,0 - blr - -_GLOBAL(__clear_user) - addi r6,r3,-4 - li r3,0 - li r5,0 - cmplwi 0,r4,4 - blt 7f - /* clear a single word */ -11: stwu r5,4(r6) - beqlr - /* clear word sized chunks */ - andi. r0,r6,3 - add r4,r0,r4 - subf r6,r0,r6 - srwi r0,r4,2 - andi. r4,r4,3 - mtctr r0 - bdz 7f -1: stwu r5,4(r6) - bdnz 1b - /* clear byte sized chunks */ -7: cmpwi 0,r4,0 - beqlr - mtctr r4 - addi r6,r6,3 -8: stbu r5,1(r6) - bdnz 8b - blr -90: mr r3,r4 - blr -91: mfctr r3 - slwi r3,r3,2 - add r3,r3,r4 - blr -92: mfctr r3 - blr - - .section __ex_table,"a" - .align 3 - .llong 11b,90b - .llong 1b,91b - .llong 8b,92b - .text - -/* r3 = dst, r4 = src, r5 = count */ -_GLOBAL(__strncpy_from_user) - addi r6,r3,-1 - addi r4,r4,-1 - cmpwi 0,r5,0 - beq 2f - mtctr r5 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - beq 3f -2: addi r6,r6,1 -3: subf r3,r3,r6 - blr -99: li r3,-EFAULT - blr - - .section __ex_table,"a" - .align 3 - .llong 1b,99b - .text - -/* r3 = str, r4 = len (> 0) */ -_GLOBAL(__strnlen_user) - addi r7,r3,-1 - mtctr r4 /* ctr = len */ -1: lbzu r0,1(r7) /* get next byte */ - cmpwi 0,r0,0 - bdnzf 2,1b /* loop if --ctr != 0 && byte != 0 */ - addi r7,r7,1 - subf r3,r3,r7 /* number of bytes we have looked at */ - beqlr /* return if we found a 0 byte */ - cmpw 0,r3,r4 /* did we look at all len bytes? */ - blt 99f /* if not, must have hit top */ - addi r3,r4,1 /* return len + 1 to indicate no null found */ - blr -99: li r3,0 /* bad address, return 0 */ - blr - - .section __ex_table,"a" - .align 3 - .llong 1b,99b |