diff options
Diffstat (limited to 'arch')
214 files changed, 1646 insertions, 9539 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5f9ae5dbd1a..d1799267a01f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -279,7 +279,6 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ - select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -312,7 +311,6 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB - select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD @@ -407,21 +405,19 @@ config ARCH_GEMINI help Support for the Cortina Systems Gemini family SoCs -config ARCH_PRIMA2 - bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" - select CPU_V7 +config ARCH_SIRF + bool "CSR SiRF" select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_SIRF select USE_OF - select ZONE_DMA help - Support for CSR SiRFSoC ARM Cortex A9 Platform + Support for CSR SiRFprimaII/Marco/Polo platforms config ARCH_EBSA110 bool "EBSA-110" @@ -456,7 +452,7 @@ config ARCH_FOOTBRIDGE select FOOTBRIDGE select GENERIC_CLOCKEVENTS select HAVE_IDE - select NEED_MACH_IO_H + select NEED_MACH_IO_H if !MMU select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -513,7 +509,6 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G - select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NEED_RET_TO_USER help @@ -523,7 +518,6 @@ config ARCH_IOP32X bool "IOP32x-based" depends on MMU select CPU_XSCALE - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -536,7 +530,6 @@ config ARCH_IOP33X bool "IOP33x-based" depends on MMU select CPU_XSCALE - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -576,7 +569,6 @@ config ARCH_DOVE select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the Marvell Dove SoC 88AP510 @@ -587,7 +579,6 @@ config ARCH_KIRKWOOD select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Kirkwood series SoCs: @@ -614,7 +605,6 @@ config ARCH_MV78XX0 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell MV78xx0 series SoCs: @@ -627,7 +617,6 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: @@ -652,8 +641,9 @@ config ARCH_KS8695 bool "Micrel/Kendin KS8695" select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -683,7 +673,6 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ select USE_OF help @@ -709,14 +698,6 @@ config ARCH_PICOXCELL family of Femtocell devices. The picoxcell support requires device tree for all boards. -config ARCH_PNX4008 - bool "Philips Nexperia PNX4008 Mobile" - select CPU_ARM926T - select CLKDEV_LOOKUP - select ARCH_USES_GETTIMEOFFSET - help - This enables support for Philips PNX4008 mobile platform. - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -912,7 +893,6 @@ config ARCH_SHARK select PCI select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H - select NEED_MACH_IO_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -931,6 +911,7 @@ config ARCH_U300 select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. @@ -1118,6 +1099,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-prima2/Kconfig" + source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-u300/Kconfig" @@ -1179,12 +1162,6 @@ config XSCALE_PMU depends on CPU_XSCALE default y -config CPU_HAS_PMU - depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \ - (!ARCH_OMAP3 || OMAP3_EMU) - default y - bool - config MULTI_IRQ_HANDLER bool help @@ -1757,7 +1734,7 @@ config HIGHPTE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && CPU_HAS_PMU + depends on PERF_EVENTS default y help Enable hardware performance counter support for perf events. If diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d..210c923025b1 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -167,7 +167,6 @@ machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell -machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 2b0ff60247a4..2acc86cfdd05 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -49,7 +49,7 @@ i2c@1001d000 { clock-frequency = <400000>; status = "okay"; - at24@4c { + at24@52 { compatible = "at,24c32"; pagesize = <32>; reg = <0x52>; diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig deleted file mode 100644 index 35a31ccacc32..000000000000 --- a/arch/arm/configs/pnx4008_defconfig +++ /dev/null @@ -1,472 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_ARCH_PNX4008=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -CONFIG_IP_VS=m -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m -CONFIG_IP_VS_FTP=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_DECNET_NF_GRABULATOR=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_IP_SCTP=m -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_LLC2=m -CONFIG_IPX=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_ECONET=m -CONFIG_ECONET_AUNUDP=y -CONFIG_ECONET_NATIVE=y -CONFIG_WAN_ROUTER=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_PKTGEN=m -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_DOC2000=m -CONFIG_MTD_DOC2001=m -CONFIG_MTD_DOC2001PLUS=m -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_CDROM_PKTCDVD=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_DEBUG=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_WAN=y -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_DLCI=m -CONFIG_WAN_ROUTER_DRIVERS=m -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_ATM_TCP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=m -CONFIG_USBPCWATCHDOG=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SOUND_PRIME=m -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_TEST=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DUMMY_HCD=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_ROMFS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_ACORN_PARTITION=y -CONFIG_ACORN_PARTITION_ICS=y -CONFIG_ACORN_PARTITION_RISCIX=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index c328ac65479a..807d4e2acb17 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -1,4 +1,6 @@ CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y @@ -8,9 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_ARCH_PRIMA2=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_SIRF=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_KEXEC=y @@ -36,7 +36,6 @@ CONFIG_SPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 2ff2c75a4639..02fe2fbe2477 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -217,18 +217,8 @@ extern int iop3xx_get_init_atu(void); #define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 #define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000 -#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 -#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 -#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ - IOP3XX_PCI_LOWER_IO_PA) +\ - IOP3XX_PCI_LOWER_IO_VA) - +#define IOP3XX_PCI_LOWER_IO_BA 0x00000000 #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 815c669fec0a..8f4db67533e5 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -113,11 +113,19 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #define __iowmb() do { } while (0) #endif +/* PCI fixed i/o mapping */ +#define PCI_IO_VIRT_BASE 0xfee00000 + +extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr); + /* * Now, pick up the machine-defined IO definitions */ #ifdef CONFIG_NEED_MACH_IO_H #include <mach/io.h> +#elif defined(CONFIG_PCI) +#define IO_SPACE_LIMIT ((resource_size_t)0xfffff) +#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT)) #else #define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) #endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index a6efcdd6fd25..195ac2f9d3d3 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -9,6 +9,9 @@ * * Page table mapping constructs and function prototypes */ +#ifndef __ASM_MACH_MAP_H +#define __ASM_MACH_MAP_H + #include <asm/io.h> struct map_desc { @@ -34,6 +37,8 @@ struct map_desc { #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); +extern void vm_reserve_area_early(unsigned long addr, unsigned long size, + void *caller); struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); @@ -44,4 +49,7 @@ extern int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype); #else #define iotable_init(map,num) do { } while (0) +#define vm_reserve_area_early(a,s,c) do { } while (0) +#endif + #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 26c511fddf8f..db9fedb57f2c 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -11,6 +11,8 @@ #ifndef __ASM_MACH_PCI_H #define __ASM_MACH_PCI_H +#include <linux/ioport.h> + struct pci_sys_data; struct pci_ops; struct pci_bus; @@ -42,6 +44,8 @@ struct pci_sys_data { unsigned long io_offset; /* bus->cpu IO mapping offset */ struct pci_bus *bus; /* PCI bus */ struct list_head resources; /* root bus resources (apertures) */ + struct resource io_res; + char io_res_name[12]; /* Bridge swizzling */ u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ @@ -55,6 +59,15 @@ struct pci_sys_data { void pci_common_init(struct hw_pci *); /* + * Setup early fixed I/O mapping. + */ +#if defined(CONFIG_PCI) +extern void pci_map_io_early(unsigned long pfn); +#else +static inline void pci_map_io_early(unsigned long pfn) {} +#endif + +/* * PCI controllers */ extern struct pci_ops iop3xx_ops; diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index e074948d8143..625cd621a436 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,6 +12,13 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* Nothing to see here... */ +/* + * The ARMv7 CPU PMU supports up to 32 event counters. + */ +#define ARMPMU_MAX_HWEVENTS 32 + +#define HW_OP_UNSUPPORTED 0xFFFF +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xFFFF #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 4432305f4a2a..a26170dce02e 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -16,69 +16,30 @@ #include <linux/perf_event.h> /* - * Types of PMUs that can be accessed directly and require mutual - * exclusion between profiling tools. - */ -enum arm_pmu_type { - ARM_PMU_DEVICE_CPU = 0, - ARM_NUM_PMU_DEVICES, -}; - -/* * struct arm_pmu_platdata - ARM PMU platform data * * @handle_irq: an optional handler which will be called from the * interrupt and passed the address of the low level handler, * and can be used to implement any platform specific handling * before or after calling it. - * @enable_irq: an optional handler which will be called after - * request_irq and be used to handle some platform specific - * irq enablement - * @disable_irq: an optional handler which will be called before - * free_irq and be used to handle some platform specific - * irq disablement + * @runtime_resume: an optional handler which will be called by the + * runtime PM framework following a call to pm_runtime_get(). + * Note that if pm_runtime_get() is called more than once in + * succession this handler will only be called once. + * @runtime_suspend: an optional handler which will be called by the + * runtime PM framework following a call to pm_runtime_put(). + * Note that if pm_runtime_get() is called more than once in + * succession this handler will only be called following the + * final call to pm_runtime_put() that actually disables the + * hardware. */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); - void (*enable_irq)(int irq); - void (*disable_irq)(int irq); + int (*runtime_resume)(struct device *dev); + int (*runtime_suspend)(struct device *dev); }; -#ifdef CONFIG_CPU_HAS_PMU - -/** - * reserve_pmu() - reserve the hardware performance counters - * - * Reserve the hardware performance counters in the system for exclusive use. - * Returns 0 on success or -EBUSY if the lock is already held. - */ -extern int -reserve_pmu(enum arm_pmu_type type); - -/** - * release_pmu() - Relinquish control of the performance counters - * - * Release the performance counters and allow someone else to use them. - */ -extern void -release_pmu(enum arm_pmu_type type); - -#else /* CONFIG_CPU_HAS_PMU */ - -#include <linux/err.h> - -static inline int -reserve_pmu(enum arm_pmu_type type) -{ - return -ENODEV; -} - -static inline void -release_pmu(enum arm_pmu_type type) { } - -#endif /* CONFIG_CPU_HAS_PMU */ - #ifdef CONFIG_HW_PERF_EVENTS /* The events for a given PMU register set. */ @@ -103,7 +64,6 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; - enum arm_pmu_type type; cpumask_t active_irqs; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); @@ -118,6 +78,8 @@ struct arm_pmu { void (*start)(void); void (*stop)(void); void (*reset)(void *); + int (*request_irq)(irq_handler_t handler); + void (*free_irq)(void); int (*map_event)(struct perf_event *event); int num_events; atomic_t active_events; @@ -129,7 +91,9 @@ struct arm_pmu { #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) -int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); +extern const struct dev_pm_ops armpmu_dev_pm_ops; + +int armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, @@ -139,6 +103,13 @@ int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx); +int armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask); + #endif /* CONFIG_HW_PERF_EVENTS */ #endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 7ad2d5cf7008..1c4321430737 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -69,8 +69,7 @@ obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o -obj-$(CONFIG_CPU_HAS_PMU) += pmu.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 2b2f25e7fef5..b244696de1a3 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <asm/mach-types.h> +#include <asm/mach/map.h> #include <asm/mach/pci.h> static int debug_pci; @@ -423,6 +424,38 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } +static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys) +{ + int ret; + struct pci_host_bridge_window *window; + + if (list_empty(&sys->resources)) { + pci_add_resource_offset(&sys->resources, + &iomem_resource, sys->mem_offset); + } + + list_for_each_entry(window, &sys->resources, list) { + if (resource_type(window->res) == IORESOURCE_IO) + return 0; + } + + sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io; + sys->io_res.end = (busnr + 1) * SZ_64K - 1; + sys->io_res.flags = IORESOURCE_IO; + sys->io_res.name = sys->io_res_name; + sprintf(sys->io_res_name, "PCI%d I/O", busnr); + + ret = request_resource(&ioport_resource, &sys->io_res); + if (ret) { + pr_err("PCI: unable to allocate I/O port region (%d)\n", ret); + return ret; + } + pci_add_resource_offset(&sys->resources, &sys->io_res, + sys->io_offset); + + return 0; +} + static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) { struct pci_sys_data *sys = NULL; @@ -445,11 +478,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) ret = hw->setup(nr, sys); if (ret > 0) { - if (list_empty(&sys->resources)) { - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &iomem_resource, sys->mem_offset); + ret = pcibios_init_resources(nr, sys); + if (ret) { + kfree(sys); + break; } if (hw->scan) @@ -627,3 +659,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return 0; } + +void __init pci_map_io_early(unsigned long pfn) +{ + struct map_desc pci_io_desc = { + .virtual = PCI_IO_VIRT_BASE, + .type = MT_DEVICE, + .length = SZ_64K, + }; + + pci_io_desc.pfn = pfn; + iotable_init(&pci_io_desc, 1); +} diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index ab243b87118d..93971b1a4f0b 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -12,68 +12,15 @@ */ #define pr_fmt(fmt) "hw perfevents: " fmt -#include <linux/bitmap.h> -#include <linux/interrupt.h> #include <linux/kernel.h> -#include <linux/export.h> -#include <linux/perf_event.h> #include <linux/platform_device.h> -#include <linux/spinlock.h> +#include <linux/pm_runtime.h> #include <linux/uaccess.h> -#include <asm/cputype.h> -#include <asm/irq.h> #include <asm/irq_regs.h> #include <asm/pmu.h> #include <asm/stacktrace.h> -/* - * ARMv6 supports a maximum of 3 events, starting from index 0. If we add - * another platform that supports more, we need to increase this to be the - * largest of all platforms. - * - * ARMv7 supports up to 32 events: - * cycle counter CCNT + 31 events counters CNT0..30. - * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. - */ -#define ARMPMU_MAX_HWEVENTS 32 - -static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); -static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); -static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); - -#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) - -/* Set at runtime when we know what CPU type we are. */ -static struct arm_pmu *cpu_pmu; - -const char *perf_pmu_name(void) -{ - if (!cpu_pmu) - return NULL; - - return cpu_pmu->pmu.name; -} -EXPORT_SYMBOL_GPL(perf_pmu_name); - -int perf_num_counters(void) -{ - int max_events = 0; - - if (cpu_pmu != NULL) - max_events = cpu_pmu->num_events; - - return max_events; -} -EXPORT_SYMBOL_GPL(perf_num_counters); - -#define HW_OP_UNSUPPORTED 0xFFFF - -#define C(_x) \ - PERF_COUNT_HW_CACHE_##_x - -#define CACHE_OP_UNSUPPORTED 0xFFFF - static int armpmu_map_cache_event(const unsigned (*cache_map) [PERF_COUNT_HW_CACHE_MAX] @@ -104,7 +51,7 @@ armpmu_map_cache_event(const unsigned (*cache_map) } static int -armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) +armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { int mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; @@ -116,19 +63,20 @@ armpmu_map_raw_event(u32 raw_event_mask, u64 config) return (int)(config & raw_event_mask); } -static int map_cpu_event(struct perf_event *event, - const unsigned (*event_map)[PERF_COUNT_HW_MAX], - const unsigned (*cache_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX], - u32 raw_event_mask) +int +armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask) { u64 config = event->attr.config; switch (event->attr.type) { case PERF_TYPE_HARDWARE: - return armpmu_map_event(event_map, config); + return armpmu_map_hw_event(event_map, config); case PERF_TYPE_HW_CACHE: return armpmu_map_cache_event(cache_map, config); case PERF_TYPE_RAW: @@ -222,7 +170,6 @@ armpmu_stop(struct perf_event *event, int flags) */ if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); - barrier(); /* why? */ armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } @@ -350,99 +297,41 @@ validate_group(struct perf_event *event) return 0; } -static irqreturn_t armpmu_platform_irq(int irq, void *dev) +static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) { struct arm_pmu *armpmu = (struct arm_pmu *) dev; struct platform_device *plat_device = armpmu->plat_device; struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev); - return plat->handle_irq(irq, dev, armpmu->handle_irq); + if (plat && plat->handle_irq) + return plat->handle_irq(irq, dev, armpmu->handle_irq); + else + return armpmu->handle_irq(irq, dev); } static void armpmu_release_hardware(struct arm_pmu *armpmu) { - int i, irq, irqs; - struct platform_device *pmu_device = armpmu->plat_device; - struct arm_pmu_platdata *plat = - dev_get_platdata(&pmu_device->dev); - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - - for (i = 0; i < irqs; ++i) { - if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs)) - continue; - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) { - if (plat && plat->disable_irq) - plat->disable_irq(irq); - free_irq(irq, armpmu); - } - } - - release_pmu(armpmu->type); + armpmu->free_irq(); + pm_runtime_put_sync(&armpmu->plat_device->dev); } static int armpmu_reserve_hardware(struct arm_pmu *armpmu) { - struct arm_pmu_platdata *plat; - irq_handler_t handle_irq; - int i, err, irq, irqs; + int err; struct platform_device *pmu_device = armpmu->plat_device; if (!pmu_device) return -ENODEV; - err = reserve_pmu(armpmu->type); + pm_runtime_get_sync(&pmu_device->dev); + err = armpmu->request_irq(armpmu_dispatch_irq); if (err) { - pr_warning("unable to reserve pmu\n"); + armpmu_release_hardware(armpmu); return err; } - plat = dev_get_platdata(&pmu_device->dev); - if (plat && plat->handle_irq) - handle_irq = armpmu_platform_irq; - else - handle_irq = armpmu->handle_irq; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - if (irqs < 1) { - pr_err("no irqs for PMUs defined\n"); - return -ENODEV; - } - - for (i = 0; i < irqs; ++i) { - err = 0; - irq = platform_get_irq(pmu_device, i); - if (irq < 0) - continue; - - /* - * If we have a single PMU interrupt that we can't shift, - * assume that we're running on a uniprocessor machine and - * continue. Otherwise, continue without this interrupt. - */ - if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { - pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, i); - continue; - } - - err = request_irq(irq, handle_irq, - IRQF_DISABLED | IRQF_NOBALANCING, - "arm-pmu", armpmu); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - armpmu_release_hardware(armpmu); - return err; - } else if (plat && plat->enable_irq) - plat->enable_irq(irq); - - cpumask_set_cpu(i, &armpmu->active_irqs); - } - return 0; } @@ -581,6 +470,32 @@ static void armpmu_disable(struct pmu *pmu) armpmu->stop(); } +#ifdef CONFIG_PM_RUNTIME +static int armpmu_runtime_resume(struct device *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(dev); + + if (plat && plat->runtime_resume) + return plat->runtime_resume(dev); + + return 0; +} + +static int armpmu_runtime_suspend(struct device *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(dev); + + if (plat && plat->runtime_suspend) + return plat->runtime_suspend(dev); + + return 0; +} +#endif + +const struct dev_pm_ops armpmu_dev_pm_ops = { + SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL) +}; + static void __init armpmu_init(struct arm_pmu *armpmu) { atomic_set(&armpmu->active_events, 0); @@ -598,174 +513,14 @@ static void __init armpmu_init(struct arm_pmu *armpmu) }; } -int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type) +int armpmu_register(struct arm_pmu *armpmu, char *name, int type) { armpmu_init(armpmu); + pr_info("enabled with %s PMU driver, %d counters available\n", + armpmu->name, armpmu->num_events); return perf_pmu_register(&armpmu->pmu, name, type); } -/* Include the PMU-specific implementations. */ -#include "perf_event_xscale.c" -#include "perf_event_v6.c" -#include "perf_event_v7.c" - -/* - * Ensure the PMU has sane values out of reset. - * This requires SMP to be available, so exists as a separate initcall. - */ -static int __init -cpu_pmu_reset(void) -{ - if (cpu_pmu && cpu_pmu->reset) - return on_each_cpu(cpu_pmu->reset, NULL, 1); - return 0; -} -arch_initcall(cpu_pmu_reset); - -/* - * PMU platform driver and devicetree bindings. - */ -static struct of_device_id armpmu_of_device_ids[] = { - {.compatible = "arm,cortex-a9-pmu"}, - {.compatible = "arm,cortex-a8-pmu"}, - {.compatible = "arm,arm1136-pmu"}, - {.compatible = "arm,arm1176-pmu"}, - {}, -}; - -static struct platform_device_id armpmu_plat_device_ids[] = { - {.name = "arm-pmu"}, - {}, -}; - -static int __devinit armpmu_device_probe(struct platform_device *pdev) -{ - if (!cpu_pmu) - return -ENODEV; - - cpu_pmu->plat_device = pdev; - return 0; -} - -static struct platform_driver armpmu_driver = { - .driver = { - .name = "arm-pmu", - .of_match_table = armpmu_of_device_ids, - }, - .probe = armpmu_device_probe, - .id_table = armpmu_plat_device_ids, -}; - -static int __init register_pmu_driver(void) -{ - return platform_driver_register(&armpmu_driver); -} -device_initcall(register_pmu_driver); - -static struct pmu_hw_events *armpmu_get_cpu_events(void) -{ - return &__get_cpu_var(cpu_hw_events); -} - -static void __init cpu_pmu_init(struct arm_pmu *armpmu) -{ - int cpu; - for_each_possible_cpu(cpu) { - struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); - events->events = per_cpu(hw_events, cpu); - events->used_mask = per_cpu(used_mask, cpu); - raw_spin_lock_init(&events->pmu_lock); - } - armpmu->get_hw_events = armpmu_get_cpu_events; - armpmu->type = ARM_PMU_DEVICE_CPU; -} - -/* - * PMU hardware loses all context when a CPU goes offline. - * When a CPU is hotplugged back in, since some hardware registers are - * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading - * junk values out of them. - */ -static int __cpuinit pmu_cpu_notify(struct notifier_block *b, - unsigned long action, void *hcpu) -{ - if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) - return NOTIFY_DONE; - - if (cpu_pmu && cpu_pmu->reset) - cpu_pmu->reset(NULL); - - return NOTIFY_OK; -} - -static struct notifier_block __cpuinitdata pmu_cpu_notifier = { - .notifier_call = pmu_cpu_notify, -}; - -/* - * CPU PMU identification and registration. - */ -static int __init -init_hw_perf_events(void) -{ - unsigned long cpuid = read_cpuid_id(); - unsigned long implementor = (cpuid & 0xFF000000) >> 24; - unsigned long part_number = (cpuid & 0xFFF0); - - /* ARM Ltd CPUs. */ - if (0x41 == implementor) { - switch (part_number) { - case 0xB360: /* ARM1136 */ - case 0xB560: /* ARM1156 */ - case 0xB760: /* ARM1176 */ - cpu_pmu = armv6pmu_init(); - break; - case 0xB020: /* ARM11mpcore */ - cpu_pmu = armv6mpcore_pmu_init(); - break; - case 0xC080: /* Cortex-A8 */ - cpu_pmu = armv7_a8_pmu_init(); - break; - case 0xC090: /* Cortex-A9 */ - cpu_pmu = armv7_a9_pmu_init(); - break; - case 0xC050: /* Cortex-A5 */ - cpu_pmu = armv7_a5_pmu_init(); - break; - case 0xC0F0: /* Cortex-A15 */ - cpu_pmu = armv7_a15_pmu_init(); - break; - case 0xC070: /* Cortex-A7 */ - cpu_pmu = armv7_a7_pmu_init(); - break; - } - /* Intel CPUs [xscale]. */ - } else if (0x69 == implementor) { - part_number = (cpuid >> 13) & 0x7; - switch (part_number) { - case 1: - cpu_pmu = xscale1pmu_init(); - break; - case 2: - cpu_pmu = xscale2pmu_init(); - break; - } - } - - if (cpu_pmu) { - pr_info("enabled with %s PMU driver, %d counters available\n", - cpu_pmu->name, cpu_pmu->num_events); - cpu_pmu_init(cpu_pmu); - register_cpu_notifier(&pmu_cpu_notifier); - armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); - } else { - pr_info("no hardware support available\n"); - } - - return 0; -} -early_initcall(init_hw_perf_events); - /* * Callchain handling code. */ diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c new file mode 100644 index 000000000000..8d7d8d4de9d6 --- /dev/null +++ b/arch/arm/kernel/perf_event_cpu.c @@ -0,0 +1,295 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ +#define pr_fmt(fmt) "CPU PMU: " fmt + +#include <linux/bitmap.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#include <asm/cputype.h> +#include <asm/irq_regs.h> +#include <asm/pmu.h> + +/* Set at runtime when we know what CPU type we are. */ +static struct arm_pmu *cpu_pmu; + +static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); +static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); +static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); + +/* + * Despite the names, these two functions are CPU-specific and are used + * by the OProfile/perf code. + */ +const char *perf_pmu_name(void) +{ + if (!cpu_pmu) + return NULL; + + return cpu_pmu->pmu.name; +} +EXPORT_SYMBOL_GPL(perf_pmu_name); + +int perf_num_counters(void) +{ + int max_events = 0; + + if (cpu_pmu != NULL) + max_events = cpu_pmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(perf_num_counters); + +/* Include the PMU-specific implementations. */ +#include "perf_event_xscale.c" +#include "perf_event_v6.c" +#include "perf_event_v7.c" + +static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) +{ + return &__get_cpu_var(cpu_hw_events); +} + +static void cpu_pmu_free_irq(void) +{ + int i, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + for (i = 0; i < irqs; ++i) { + if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, cpu_pmu); + } +} + +static int cpu_pmu_request_irq(irq_handler_t handler) +{ + int i, err, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + + if (!pmu_device) + return -ENODEV; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { + pr_err("no irqs for PMUs defined\n"); + return -ENODEV; + } + + for (i = 0; i < irqs; ++i) { + err = 0; + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, i); + continue; + } + + err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu", + cpu_pmu); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + + cpumask_set_cpu(i, &cpu_pmu->active_irqs); + } + + return 0; +} + +static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) +{ + int cpu; + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); + events->events = per_cpu(hw_events, cpu); + events->used_mask = per_cpu(used_mask, cpu); + raw_spin_lock_init(&events->pmu_lock); + } + + cpu_pmu->get_hw_events = cpu_pmu_get_cpu_events; + cpu_pmu->request_irq = cpu_pmu_request_irq; + cpu_pmu->free_irq = cpu_pmu_free_irq; + + /* Ensure the PMU has sane values out of reset. */ + if (cpu_pmu && cpu_pmu->reset) + on_each_cpu(cpu_pmu->reset, NULL, 1); +} + +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit cpu_pmu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = { + .notifier_call = cpu_pmu_notify, +}; + +/* + * PMU platform driver and devicetree bindings. + */ +static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = { + {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, + {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, + {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, + {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, + {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, + {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, + {.compatible = "arm,arm1176-pmu", .data = armv6pmu_init}, + {.compatible = "arm,arm1136-pmu", .data = armv6pmu_init}, + {}, +}; + +static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { + {.name = "arm-pmu"}, + {}, +}; + +/* + * CPU PMU identification and probing. + */ +static struct arm_pmu *__devinit probe_current_pmu(void) +{ + struct arm_pmu *pmu = NULL; + int cpu = get_cpu(); + unsigned long cpuid = read_cpuid_id(); + unsigned long implementor = (cpuid & 0xFF000000) >> 24; + unsigned long part_number = (cpuid & 0xFFF0); + + pr_info("probing PMU on CPU %d\n", cpu); + + /* ARM Ltd CPUs. */ + if (0x41 == implementor) { + switch (part_number) { + case 0xB360: /* ARM1136 */ + case 0xB560: /* ARM1156 */ + case 0xB760: /* ARM1176 */ + pmu = armv6pmu_init(); + break; + case 0xB020: /* ARM11mpcore */ + pmu = armv6mpcore_pmu_init(); + break; + case 0xC080: /* Cortex-A8 */ + pmu = armv7_a8_pmu_init(); + break; + case 0xC090: /* Cortex-A9 */ + pmu = armv7_a9_pmu_init(); + break; + case 0xC050: /* Cortex-A5 */ + pmu = armv7_a5_pmu_init(); + break; + case 0xC0F0: /* Cortex-A15 */ + pmu = armv7_a15_pmu_init(); + break; + case 0xC070: /* Cortex-A7 */ + pmu = armv7_a7_pmu_init(); + break; + } + /* Intel CPUs [xscale]. */ + } else if (0x69 == implementor) { + part_number = (cpuid >> 13) & 0x7; + switch (part_number) { + case 1: + pmu = xscale1pmu_init(); + break; + case 2: + pmu = xscale2pmu_init(); + break; + } + } + + put_cpu(); + return pmu; +} + +static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct arm_pmu *(*init_fn)(void); + struct device_node *node = pdev->dev.of_node; + + if (cpu_pmu) { + pr_info("attempt to register multiple PMU devices!"); + return -ENOSPC; + } + + if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { + init_fn = of_id->data; + cpu_pmu = init_fn(); + } else { + cpu_pmu = probe_current_pmu(); + } + + if (!cpu_pmu) + return -ENODEV; + + cpu_pmu->plat_device = pdev; + cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&cpu_pmu_hotplug_notifier); + armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); + + return 0; +} + +static struct platform_driver cpu_pmu_driver = { + .driver = { + .name = "arm-pmu", + .pm = &armpmu_dev_pm_ops, + .of_match_table = cpu_pmu_of_device_ids, + }, + .probe = cpu_pmu_device_probe, + .id_table = cpu_pmu_plat_device_ids, +}; + +static int __init register_pmu_driver(void) +{ + return platform_driver_register(&cpu_pmu_driver); +} +device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index c90fcb2b6967..6ccc07971745 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -645,7 +645,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, static int armv6_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv6_perf_map, + return armpmu_map_event(event, &armv6_perf_map, &armv6_perf_cache_map, 0xFF); } @@ -664,7 +664,7 @@ static struct arm_pmu armv6pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__devinit armv6pmu_init(void) { return &armv6pmu; } @@ -679,7 +679,7 @@ static struct arm_pmu *__init armv6pmu_init(void) static int armv6mpcore_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv6mpcore_perf_map, + return armpmu_map_event(event, &armv6mpcore_perf_map, &armv6mpcore_perf_cache_map, 0xFF); } @@ -698,17 +698,17 @@ static struct arm_pmu armv6mpcore_pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) { return &armv6mpcore_pmu; } #else -static struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__devinit armv6pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f04070bd2183..bd4b090ebcfd 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1204,31 +1204,31 @@ static void armv7pmu_reset(void *info) static int armv7_a8_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a8_perf_map, + return armpmu_map_event(event, &armv7_a8_perf_map, &armv7_a8_perf_cache_map, 0xFF); } static int armv7_a9_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a9_perf_map, + return armpmu_map_event(event, &armv7_a9_perf_map, &armv7_a9_perf_cache_map, 0xFF); } static int armv7_a5_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a5_perf_map, + return armpmu_map_event(event, &armv7_a5_perf_map, &armv7_a5_perf_cache_map, 0xFF); } static int armv7_a15_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a15_perf_map, + return armpmu_map_event(event, &armv7_a15_perf_map, &armv7_a15_perf_cache_map, 0xFF); } static int armv7_a7_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a7_perf_map, + return armpmu_map_event(event, &armv7_a7_perf_map, &armv7_a7_perf_cache_map, 0xFF); } @@ -1245,7 +1245,7 @@ static struct arm_pmu armv7pmu = { .max_period = (1LLU << 32) - 1, }; -static u32 __init armv7_read_num_pmnc_events(void) +static u32 __devinit armv7_read_num_pmnc_events(void) { u32 nb_cnt; @@ -1256,7 +1256,7 @@ static u32 __init armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__devinit armv7_a8_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.map_event = armv7_a8_map_event; @@ -1264,7 +1264,7 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__devinit armv7_a9_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.map_event = armv7_a9_map_event; @@ -1272,7 +1272,7 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__devinit armv7_a5_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A5"; armv7pmu.map_event = armv7_a5_map_event; @@ -1280,7 +1280,7 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__devinit armv7_a15_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A15"; armv7pmu.map_event = armv7_a15_map_event; @@ -1289,7 +1289,7 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a7_pmu_init(void) +static struct arm_pmu *__devinit armv7_a7_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A7"; armv7pmu.map_event = armv7_a7_map_event; @@ -1298,27 +1298,27 @@ static struct arm_pmu *__init armv7_a7_pmu_init(void) return &armv7pmu; } #else -static struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__devinit armv7_a8_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__devinit armv7_a9_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__devinit armv7_a5_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__devinit armv7_a15_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a7_pmu_init(void) +static struct arm_pmu *__devinit armv7_a7_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index f759fe0bab63..426e19f380a2 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -430,7 +430,7 @@ xscale1pmu_write_counter(int counter, u32 val) static int xscale_map_event(struct perf_event *event) { - return map_cpu_event(event, &xscale_perf_map, + return armpmu_map_event(event, &xscale_perf_map, &xscale_perf_cache_map, 0xFF); } @@ -449,7 +449,7 @@ static struct arm_pmu xscale1pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__devinit xscale1pmu_init(void) { return &xscale1pmu; } @@ -816,17 +816,17 @@ static struct arm_pmu xscale2pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__devinit xscale2pmu_init(void) { return &xscale2pmu; } #else -static struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__devinit xscale1pmu_init(void) { return NULL; } -static struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__devinit xscale2pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c deleted file mode 100644 index 2334bf8a650a..000000000000 --- a/arch/arm/kernel/pmu.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/kernel/pmu.c - * - * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles - * Copyright (C) 2010 ARM Ltd, Will Deacon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/pmu.h> - -/* - * PMU locking to ensure mutual exclusion between different subsystems. - */ -static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)]; - -int -reserve_pmu(enum arm_pmu_type type) -{ - return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0; -} -EXPORT_SYMBOL_GPL(reserve_pmu); - -void -release_pmu(enum arm_pmu_type type) -{ - clear_bit_unlock(type, pmu_lock); -} -EXPORT_SYMBOL_GPL(release_pmu); diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 45c97b1ee9b1..c18a5048b6c5 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -29,7 +29,6 @@ #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/time.h> -#include <asm/pmu.h> #include <asm/mach/arch.h> #include <mach/dma.h> @@ -38,7 +37,7 @@ #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include "core.h" @@ -116,7 +115,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .resource = &pmu_resource, .num_resources = 1, }; diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index adbfb1994582..4b50228a6771 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -43,11 +43,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include "clock.h" -#include <csp/secHw.h> #include <mach/csp/secHw_def.h> #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c index 96273ff34956..5050833817b7 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c @@ -26,15 +26,15 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> -#include <csp/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/export.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/reg.h> -#include <csp/delay.h> +#include <mach/csp/reg.h> +#include <linux/delay.h> /* ---- Private Constants and Types --------------------------------------- */ @@ -61,21 +61,21 @@ static int chipcHw_divide(int num, int denom) /****************************************************************************/ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; + uint32_t __iomem *pDependentClock = NULL; uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ uint32_t dependentClockType = 0; uint32_t vcoHz = 0; /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { + if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { uint64_t adjustFreq = 0; vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ @@ -86,13 +86,13 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur } else { vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); } vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); switch (clock) { @@ -187,51 +187,51 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur if (pPLLReg) { /* Obtain PLL clock frequency */ - if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { + if (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { /* Return crystal clock frequency when bypassed */ return chipcHw_XTAL_FREQ_Hz; } else if (clock == chipcHw_CLOCK_DDR) { /* DDR frequency is configured in PLLDivider register */ - return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); + return chipcHw_divide (vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256)); } else { /* From chip revision number B0, LCD clock is internally divided by 2 */ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { vcoHz >>= 1; } /* Obtain PLL clock frequency using VCO dividers */ - return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); + return chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); } } else if (pClockCtrl) { /* Obtain divider clock frequency */ uint32_t div; uint32_t freq = 0; - if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { + if (readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { /* Return crystal clock frequency when bypassed */ return chipcHw_XTAL_FREQ_Hz; } else if (pDependentClock) { /* Identify the dependent clock frequency */ switch (dependentClockType) { case PLL_CLOCK: - if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { + if (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { /* Use crystal clock frequency when dependent PLL clock is bypassed */ freq = chipcHw_XTAL_FREQ_Hz; } else { /* Obtain PLL clock frequency using VCO dividers */ - div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK; + div = readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK; freq = div ? chipcHw_divide(vcoHz, div) : 0; } break; case NON_PLL_CLOCK: - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { + if (pDependentClock == &pChipcHw->ACLKClock) { freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); } else { - if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { + if (readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { /* Use crystal clock frequency when dependent divider clock is bypassed */ freq = chipcHw_XTAL_FREQ_Hz; } else { /* Obtain divider clock frequency using XTAL dividers */ - div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; + div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK; freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256)); } } @@ -242,7 +242,7 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur freq = chipcHw_XTAL_FREQ_Hz; } - div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK; + div = readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_DIV_MASK; return chipcHw_divide(freq, (div ? div : 256)); } return 0; @@ -261,9 +261,9 @@ chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configur chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ uint32_t freq /* [ IN ] Clock frequency in Hz */ ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; + uint32_t __iomem *pDependentClock = NULL; uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ @@ -272,12 +272,12 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu uint32_t desVcoHz = 0; /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { + if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { uint64_t adjustFreq = 0; vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ @@ -289,16 +289,16 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* Desired VCO frequency */ desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + (((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1); } else { vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); } vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> + ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); switch (clock) { @@ -307,8 +307,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu { REG_LOCAL_IRQ_SAVE; /* Dvide DDR_phy by two to obtain DDR_ctrl clock */ - pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); + writel((readl(&pChipcHw->DDRClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->DDRClock); REG_LOCAL_IRQ_RESTORE; } pPLLReg = &pChipcHw->DDRClock; @@ -329,8 +328,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* Configure the VPM:BUS ratio settings */ { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); + writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->VPMClock); REG_LOCAL_IRQ_RESTORE; } pPLLReg = &pChipcHw->VPMClock; @@ -428,9 +426,9 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu /* For DDR settings use only the PLL divider clock */ if (pPLLReg == &pChipcHw->DDRClock) { /* Set M1DIV for PLL1, which controls the DDR clock */ - reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); + reg32_write(&pChipcHw->PLLDivider, (readl(&pChipcHw->PLLDivider) & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); + freq = chipcHw_divide(vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256)); } else { /* From chip revision number B0, LCD clock is internally divided by 2 */ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { @@ -441,7 +439,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK)); reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq)); /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); + freq = chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); } /* Wait for for atleast 200ns as per the protocol to change frequency */ udelay(1); @@ -460,16 +458,16 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu if (pDependentClock) { switch (dependentClockType) { case PLL_CLOCK: - divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); + divider = chipcHw_divide(chipcHw_divide (desVcoHz, (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); break; case NON_PLL_CLOCK: { uint32_t sourceClock = 0; - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { + if (pDependentClock == &pChipcHw->ACLKClock) { sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); } else { - uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; + uint32_t div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK; sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256)); } divider = chipcHw_divide(sourceClock, freq); @@ -483,7 +481,7 @@ chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configu if (divider) { REG_LOCAL_IRQ_SAVE; /* Set the divider to obtain the required frequency */ - *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK); + writel((readl(pClockCtrl) & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK), pClockCtrl); REG_LOCAL_IRQ_RESTORE; return freq; } @@ -515,25 +513,26 @@ static int vpmPhaseAlignA0(void) int count = 0; for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) { - phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; + phaseControl = (readl(&pChipcHw->VPMClock) & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; phaseValue = 0; prevPhaseComp = 0; /* Step 1: Look for falling PH_COMP transition */ /* Read the contents of VPM Clock resgister */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); do { /* Store previous value of phase comparator */ prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP; /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { phaseControl = (0x3F & (phaseControl - 1)); @@ -557,12 +556,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { phaseControl = (0x3F & (phaseControl + 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -581,12 +581,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -605,12 +606,13 @@ static int vpmPhaseAlignA0(void) for (count = 0; (count < 5); count++) { phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); + phaseValue = readl(&pChipcHw->VPMClock); /* Count number of adjustment made */ adjustCount++; } @@ -631,14 +633,14 @@ static int vpmPhaseAlignA0(void) /* Store previous value of phase comparator */ prevPhaseComp = phaseValue; /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= - chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; + phaseValue = readl(&pChipcHw->VPMClock); if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { phaseControl = (0x3F & (phaseControl - 1)); @@ -661,13 +663,13 @@ static int vpmPhaseAlignA0(void) } /* For VPM Phase should be perfectly aligned. */ - phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); + phaseControl = (((readl(&pChipcHw->VPMClock) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT); + writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT), &pChipcHw->VPMClock); /* Load new phase value */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); REG_LOCAL_IRQ_RESTORE; } @@ -697,7 +699,7 @@ int chipcHw_vpmPhaseAlign(void) int adjustCount = 0; /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); /* Disable HW VPM phase alignment */ chipcHw_vpmHwPhaseAlignDisable(); /* Enable SW VPM phase alignment */ @@ -715,23 +717,24 @@ int chipcHw_vpmPhaseAlign(void) phaseControl--; } else { /* Enable VPM access */ - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); /* Return adjust count */ return adjustCount; } /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); + reg32_write(&pChipcHw->VPMClock, + (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); /* Wait atleast 20 ns */ udelay(1); /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; + writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock); /* Count adjustment */ adjustCount++; } } /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1); return -1; } diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c index 367df75d4bb3..8377d8054168 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c @@ -26,15 +26,15 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> -#include <csp/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/export.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/reg.h> -#include <csp/delay.h> +#include <mach/csp/reg.h> +#include <linux/delay.h> /* ---- Private Constants and Types --------------------------------------- */ /* @@ -73,9 +73,9 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | + chipcHw_REG_PLL_CONFIG_A_RESET, + &pChipcHw->PLLConfig2); pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | @@ -87,28 +87,30 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; + writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus); /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider2 = pllPreDivider2; + writel(pllPreDivider2, &pChipcHw->PLLPreDivider2); /* Set NDIV Frac */ - pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f; + writel(chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider2); /* This has to be removed once the default values are fixed for PLL2. */ - pChipcHw->PLLControl12 = 0x38000700; - pChipcHw->PLLControl22 = 0x00000015; + writel(0x38000700, &pChipcHw->PLLControl12); + writel(0x00000015, &pChipcHw->PLLControl22); /* Reset PLL2 */ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); } else { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); } REG_LOCAL_IRQ_RESTORE; } @@ -119,22 +121,25 @@ void chipcHw_pll2Enable(uint32_t vcoFreqHz) { REG_LOCAL_IRQ_SAVE; /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig2 &= + writel(readl(&pChipcHw->PLLConfig2) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); + chipcHw_REG_PLL_CONFIG_POWER_DOWN), + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) + while (!(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED)) ; { REG_LOCAL_IRQ_SAVE; /* Remove digital reset */ - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET; + writel(readl(&pChipcHw->PLLConfig2) & + ~chipcHw_REG_PLL_CONFIG_D_RESET, + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } @@ -157,9 +162,9 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | + chipcHw_REG_PLL_CONFIG_A_RESET, + &pChipcHw->PLLConfig); /* Setting VCO frequency */ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { pllPreDivider = @@ -182,30 +187,22 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) } /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; + writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus); /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider = pllPreDivider; + writel(pllPreDivider, &pChipcHw->PLLPreDivider); /* Set NDIV Frac */ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f_SS; + writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f_SS, &pChipcHw->PLLDivider); } else { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f; + writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider); } /* Reset PLL1 */ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig); } else { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig); } REG_LOCAL_IRQ_RESTORE; @@ -216,22 +213,19 @@ void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) { REG_LOCAL_IRQ_SAVE; /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); + writel(readl(&pChipcHw->PLLConfig) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_POWER_DOWN), &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED) - || !(pChipcHw-> - PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) + while (!(readl(&pChipcHw->PLLStatus) & chipcHw_REG_PLL_STATUS_LOCKED) + || !(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED)) ; /* Remove digital reset */ { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET; + writel(readl(&pChipcHw->PLLConfig) & ~chipcHw_REG_PLL_CONFIG_D_RESET, &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } } @@ -267,11 +261,7 @@ void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initializ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET); /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */ - pChipcHw->ACLKClock = - (pChipcHw-> - ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> - armBusRatio & - chipcHw_REG_ACLKClock_CLK_DIV_MASK); + writel((readl(&pChipcHw->ACLKClock) & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> armBusRatio & chipcHw_REG_ACLKClock_CLK_DIV_MASK), &pChipcHw->ACLKClock); /* Set various core component frequencies. The order in which this is done is important for some. */ /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */ diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c index 2671d8896bbb..f95ce913fa1e 100644 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c +++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c @@ -13,11 +13,11 @@ *****************************************************************************/ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/chipcHw_def.h> #include <mach/csp/chipcHw_inline.h> -#include <csp/intcHw.h> -#include <csp/cache.h> +#include <mach/csp/intcHw_reg.h> +#include <asm/cacheflush.h> /* ---- Private Constants and Types --------------------------------------- */ /* ---- Private Variables ------------------------------------------------- */ @@ -50,17 +50,18 @@ void chipcHw_reset(uint32_t mask) chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); } /* Bypass the PLL clocks before reboot */ - pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; + writel(readl(&pChipcHw->UARTClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT, + &pChipcHw->UARTClock); + writel(readl(&pChipcHw->SPIClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT, + &pChipcHw->SPIClock); /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */ do { - ((uint32_t *) MM_IO_BASE_ARAM)[i] = - ((uint32_t *) &chipcHw_reset_run_from_aram)[i]; + writel(((uint32_t *) &chipcHw_reset_run_from_aram)[i], ((uint32_t __iomem *) MM_IO_BASE_ARAM) + i); i++; - } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ + } while (readl(((uint32_t __iomem*) MM_IO_BASE_ARAM) + i - 1) != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ - CSP_CACHE_FLUSH_ALL; + flush_cache_all(); /* run the function from ARAM */ runFunc(); diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c index 6b9be2e98e51..547f746c7ff4 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c @@ -25,11 +25,11 @@ /****************************************************************************/ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/string.h> -#include <stddef.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/stddef.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/csp/dmacHw_reg.h> #include <mach/csp/dmacHw_priv.h> #include <mach/csp/chipcHw_inline.h> @@ -55,33 +55,32 @@ static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handl ) { uint32_t val = 0; dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_MISC_t *pMiscReg = - (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module); + dmacHw_MISC_t __iomem *pMiscReg = (void __iomem *)dmacHw_REG_MISC_BASE(pCblk->module); switch (pCblk->channel) { case 0: - val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm2.lo) & 0x70000000) >> 28; break; case 1: - val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm3.hi) & 0x70000000) >> 28; break; case 2: - val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm3.lo) & 0x70000000) >> 28; break; case 3: - val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm4.hi) & 0x70000000) >> 28; break; case 4: - val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm4.lo) & 0x70000000) >> 28; break; case 5: - val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm5.hi) & 0x70000000) >> 28; break; case 6: - val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm5.lo) & 0x70000000) >> 28; break; case 7: - val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28; + val = (readl(&pMiscReg->CompParm6.hi) & 0x70000000) >> 28; break; } diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index a1f328357aa4..fe438699d11e 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -26,10 +26,10 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <stddef.h> +#include <linux/types.h> +#include <linux/stddef.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/csp/dmacHw_reg.h> #include <mach/csp/dmacHw_priv.h> diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c index 16225e43f3c3..dc4137ff75ca 100644 --- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c +++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c @@ -26,10 +26,10 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/stdint.h> +#include <linux/errno.h> +#include <linux/types.h> -#include <csp/tmrHw.h> +#include <mach/csp/tmrHw.h> #include <mach/csp/tmrHw_reg.h> #define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0 diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h deleted file mode 100644 index f01da877148e..000000000000 --- a/arch/arm/mach-bcmring/include/cfg_global.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _CFG_GLOBAL_H_ -#define _CFG_GLOBAL_H_ - -#include <cfg_global_defines.h> - -#define CFG_GLOBAL_CHIP BCM11107 -#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING -#define CFG_GLOBAL_CHIP_REV 0xB0 -#define CFG_GLOBAL_RAM_SIZE 0x10000000 -#define CFG_GLOBAL_RAM_BASE 0x00000000 -#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 - -#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h deleted file mode 100644 index caa20e59db99..000000000000 --- a/arch/arm/mach-bcmring/include/csp/cache.h +++ /dev/null @@ -1,35 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_CACHE_H -#define CSP_CACHE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include <csp/stdint.h> - -/* ---- Public Constants and Types --------------------------------------- */ - -#if defined(__KERNEL__) && !defined(STANDALONE) -#include <asm/cacheflush.h> - -#define CSP_CACHE_FLUSH_ALL flush_cache_all() - -#else - -#define CSP_CACHE_FLUSH_ALL - -#endif - -#endif /* CSP_CACHE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h deleted file mode 100644 index 8b3d80367293..000000000000 --- a/arch/arm/mach-bcmring/include/csp/delay.h +++ /dev/null @@ -1,36 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_DELAY_H -#define CSP_DELAY_H - -/* ---- Include Files ---------------------------------------------------- */ - -/* Some CSP routines require use of the following delay routines. Use the OS */ -/* version if available, otherwise use a CSP specific definition. */ -/* void udelay(unsigned long usecs); */ -/* void mdelay(unsigned long msecs); */ - -#if defined(__KERNEL__) && !defined(STANDALONE) - #include <linux/delay.h> -#else - #include <mach/csp/delay.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_DELAY_H */ diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h deleted file mode 100644 index 51357dd5b666..000000000000 --- a/arch/arm/mach-bcmring/include/csp/errno.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_ERRNO_H -#define CSP_ERRNO_H - -/* ---- Include Files ---------------------------------------------------- */ - -#if defined(__KERNEL__) -#include <linux/errno.h> -#elif defined(CSP_SIMULATION) -#include <asm-generic/errno.h> -#else -#include <errno.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_ERRNO_H */ diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h deleted file mode 100644 index 1c639c8ee08f..000000000000 --- a/arch/arm/mach-bcmring/include/csp/intcHw.h +++ /dev/null @@ -1,40 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -/****************************************************************************/ -/** -* @file intcHw.h -* -* @brief generic interrupt controller API -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _INTCHW_H -#define _INTCHW_H - -/* ---- Include Files ---------------------------------------------------- */ -#include <mach/csp/intcHw_reg.h> - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask); -static inline void intcHw_irq_enable(void *basep, uint32_t mask); - -#endif /* _INTCHW_H */ - diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h deleted file mode 100644 index c30d2a5975a6..000000000000 --- a/arch/arm/mach-bcmring/include/csp/module.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_MODULE_H -#define CSP_MODULE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include <linux/module.h> -#else - #define EXPORT_SYMBOL(symbol) -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_MODULE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h deleted file mode 100644 index b9d7e0732dfc..000000000000 --- a/arch/arm/mach-bcmring/include/csp/secHw.h +++ /dev/null @@ -1,65 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw.h -* -* @brief Definitions for accessing low level security features -* -*/ -/****************************************************************************/ -#ifndef SECHW_H -#define SECHW_H - -typedef void (*secHw_FUNC_t) (void); - -typedef enum { - secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */ - secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */ -} secHw_MODE; - -/****************************************************************************/ -/** -* @brief Requesting to execute the function in secure mode -* -* This function requests the given function to run in secure mode -* -*/ -/****************************************************************************/ -void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */ - ); - -/****************************************************************************/ -/** -* @brief Sets the mode -* -* his function sets the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_SetMode(secHw_MODE /* Processor mode */ - ); - -/****************************************************************************/ -/** -* @brief Get the current mode -* -* This function retieves the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_GetMode(secHw_MODE *); - -#endif /* SECHW_H */ diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h deleted file mode 100644 index 3a8718bbf700..000000000000 --- a/arch/arm/mach-bcmring/include/csp/stdint.h +++ /dev/null @@ -1,30 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_STDINT_H -#define CSP_STDINT_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ -#include <linux/types.h> -#else -#include <stdint.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_STDINT_H */ diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h deleted file mode 100644 index ad9e4005f141..000000000000 --- a/arch/arm/mach-bcmring/include/csp/string.h +++ /dev/null @@ -1,34 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - - -#ifndef CSP_STRING_H -#define CSP_STRING_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include <linux/string.h> -#else - #include <string.h> -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_STRING_H */ - diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/mach/cfg_global.h index b5beb0b30734..449133eacdf5 100644 --- a/arch/arm/mach-bcmring/include/cfg_global_defines.h +++ b/arch/arm/mach-bcmring/include/mach/cfg_global.h @@ -38,3 +38,14 @@ #define IMAGE_HEADER_SIZE_CHECKSUM 4 #endif +#ifndef _CFG_GLOBAL_H_ +#define _CFG_GLOBAL_H_ + +#define CFG_GLOBAL_CHIP BCM11107 +#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING +#define CFG_GLOBAL_CHIP_REV 0xB0 +#define CFG_GLOBAL_RAM_SIZE 0x10000000 +#define CFG_GLOBAL_RAM_BASE 0x00000000 +#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 + +#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h index 933ce68ed90b..0a89e0c63419 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h @@ -17,7 +17,7 @@ /* ---- Include Files ---------------------------------------------------- */ #include <mach/csp/cap.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> /* ---- Public Constants and Types --------------------------------------- */ #define CAP_CONFIG0_VPM_DIS 0x00000001 diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 161973385faf..39f09cb89208 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -17,9 +17,9 @@ /* ---- Include Files ----------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/errno.h> -#include <csp/reg.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <mach/csp/reg.h> #include <mach/csp/chipcHw_reg.h> /* ---- Public Constants and Types ---------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index 03238c299001..a66f3f7abb86 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -17,8 +17,8 @@ /* ---- Include Files ----------------------------------------------------- */ -#include <csp/errno.h> -#include <csp/reg.h> +#include <linux/errno.h> +#include <mach/csp/reg.h> #include <mach/csp/chipcHw_reg.h> #include <mach/csp/chipcHw_def.h> @@ -47,7 +47,7 @@ static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, /****************************************************************************/ static inline uint32_t chipcHw_getChipId(void) { - return pChipcHw->ChipId; + return readl(&pChipcHw->ChipId); } /****************************************************************************/ @@ -59,15 +59,16 @@ static inline uint32_t chipcHw_getChipId(void) /****************************************************************************/ static inline void chipcHw_enableSpreadSpectrum(void) { - if ((pChipcHw-> - PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != + if ((readl(&pChipcHw-> + PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - ddrcReg_PHY_ADDR_CTL_REGP->ssCfg = - (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | + writel((0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK << - ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT); - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |= - ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; + ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT), + &ddrcReg_PHY_ADDR_CTL_REGP->ssCfg); + writel(readl(&ddrcReg_PHY_ADDR_CTL_REGP->ssCtl) | + ddrcReg_PHY_ADDR_SS_CTRL_ENABLE, + &ddrcReg_PHY_ADDR_CTL_REGP->ssCtl); } } @@ -93,8 +94,8 @@ static inline void chipcHw_disableSpreadSpectrum(void) /****************************************************************************/ static inline uint32_t chipcHw_getChipProductId(void) { - return (pChipcHw-> - ChipId & chipcHw_REG_CHIPID_BASE_MASK) >> + return (readl(&pChipcHw-> + ChipId) & chipcHw_REG_CHIPID_BASE_MASK) >> chipcHw_REG_CHIPID_BASE_SHIFT; } @@ -109,7 +110,7 @@ static inline uint32_t chipcHw_getChipProductId(void) /****************************************************************************/ static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void) { - return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK; + return readl(&pChipcHw->ChipId) & chipcHw_REG_CHIPID_REV_MASK; } /****************************************************************************/ @@ -156,7 +157,7 @@ static inline void chipcHw_busInterfaceClockDisable(uint32_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getBusInterfaceClockStatus(void) { - return pChipcHw->BusIntfClock; + return readl(&pChipcHw->BusIntfClock); } /****************************************************************************/ @@ -215,8 +216,9 @@ static inline void chipcHw_softResetDisable(uint64_t mask) /* Deassert module soft reset */ REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 ^= ctrl1; - pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); + writel(readl(&pChipcHw->SoftReset1) ^ ctrl1, &pChipcHw->SoftReset1); + writel(readl(&pChipcHw->SoftReset2) ^ (ctrl2 & + (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2); REG_LOCAL_IRQ_RESTORE; } @@ -227,9 +229,10 @@ static inline void chipcHw_softResetEnable(uint64_t mask) uint32_t unhold = 0; REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 |= ctrl1; + writel(readl(&pChipcHw->SoftReset1) | ctrl1, &pChipcHw->SoftReset1); /* Mask out unhold request bits */ - pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); + writel(readl(&pChipcHw->SoftReset2) | (ctrl2 & + (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2); /* Process unhold requests */ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) { @@ -246,7 +249,7 @@ static inline void chipcHw_softResetEnable(uint64_t mask) if (unhold) { /* Make sure unhold request is effective */ - pChipcHw->SoftReset1 &= ~unhold; + writel(readl(&pChipcHw->SoftReset1) & ~unhold, &pChipcHw->SoftReset1); } REG_LOCAL_IRQ_RESTORE; } @@ -307,7 +310,7 @@ static inline void chipcHw_setOTPOption(uint64_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getStickyBits(void) { - return pChipcHw->Sticky; + return readl(&pChipcHw->Sticky); } /****************************************************************************/ @@ -328,7 +331,7 @@ static inline void chipcHw_setStickyBits(uint32_t mask) bits |= chipcHw_REG_STICKY_POR_BROM; } else { uint32_t sticky; - sticky = pChipcHw->Sticky; + sticky = readl(pChipcHw->Sticky); if ((mask & chipcHw_REG_STICKY_BOOT_DONE) && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) { @@ -355,7 +358,7 @@ static inline void chipcHw_setStickyBits(uint32_t mask) bits |= chipcHw_REG_STICKY_GENERAL_5; } } - pChipcHw->Sticky = bits; + writel(bits, pChipcHw->Sticky); REG_LOCAL_IRQ_RESTORE; } @@ -377,7 +380,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 | chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 | chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) { - uint32_t sticky = pChipcHw->Sticky; + uint32_t sticky = readl(&pChipcHw->Sticky); if ((mask & chipcHw_REG_STICKY_BOOT_DONE) && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) { @@ -410,7 +413,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) mask &= ~chipcHw_REG_STICKY_GENERAL_5; } } - pChipcHw->Sticky = bits | mask; + writel(bits | mask, &pChipcHw->Sticky); REG_LOCAL_IRQ_RESTORE; } @@ -426,7 +429,7 @@ static inline void chipcHw_clearStickyBits(uint32_t mask) /****************************************************************************/ static inline uint32_t chipcHw_getSoftStraps(void) { - return pChipcHw->SoftStraps; + return readl(&pChipcHw->SoftStraps); } /****************************************************************************/ @@ -456,7 +459,7 @@ static inline void chipcHw_setSoftStraps(uint32_t strapOptions) /****************************************************************************/ static inline uint32_t chipcHw_getPinStraps(void) { - return pChipcHw->PinStraps; + return readl(&pChipcHw->PinStraps); } /****************************************************************************/ @@ -671,9 +674,9 @@ static inline void chipcHw_selectGE3(void) /****************************************************************************/ static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin) { - return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) & + return (readl(chipcHw_REG_GPIO_MUX(pin))) & (chipcHw_REG_GPIO_MUX_MASK << - chipcHw_REG_GPIO_MUX_POSITION(pin))) >> + chipcHw_REG_GPIO_MUX_POSITION(pin)) >> chipcHw_REG_GPIO_MUX_POSITION(pin); } @@ -841,8 +844,8 @@ static inline void chipcHw_setUsbDevice(void) static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, chipcHw_OPTYPE_e type, int mode) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; + uint32_t __iomem *pPLLReg = NULL; + uint32_t __iomem *pClockCtrl = NULL; switch (clock) { case chipcHw_CLOCK_DDR: @@ -1071,7 +1074,7 @@ static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock) /****************************************************************************/ static inline int chipcHw_isSoftwareStrapsEnable(void) { - return pChipcHw->SoftStraps & 0x00000001; + return readl(&pChipcHw->SoftStraps) & 0x00000001; } /****************************************************************************/ @@ -1138,7 +1141,7 @@ static inline void chipcHw_pll2TestDisable(void) /****************************************************************************/ static inline int chipcHw_isPllTestEnable(void) { - return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; + return readl(&pChipcHw->PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; } /****************************************************************************/ @@ -1147,7 +1150,7 @@ static inline int chipcHw_isPllTestEnable(void) /****************************************************************************/ static inline int chipcHw_isPll2TestEnable(void) { - return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; + return readl(&pChipcHw->PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; } /****************************************************************************/ @@ -1183,8 +1186,8 @@ static inline void chipcHw_pll2TestSelect(uint32_t val) /****************************************************************************/ static inline uint8_t chipcHw_getPllTestSelected(void) { - return (uint8_t) ((pChipcHw-> - PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) + return (uint8_t) ((readl(&pChipcHw-> + PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); } @@ -1194,8 +1197,8 @@ static inline uint8_t chipcHw_getPllTestSelected(void) /****************************************************************************/ static inline uint8_t chipcHw_getPll2TestSelected(void) { - return (uint8_t) ((pChipcHw-> - PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) + return (uint8_t) ((readl(&pChipcHw-> + PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); } @@ -1208,7 +1211,8 @@ static inline uint8_t chipcHw_getPll2TestSelected(void) static inline void chipcHw_pll1Disable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(readl(&pChipcHw->PLLConfig) | chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig); REG_LOCAL_IRQ_RESTORE; } @@ -1221,7 +1225,8 @@ static inline void chipcHw_pll1Disable(void) static inline void chipcHw_pll2Disable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; + writel(readl(&pChipcHw->PLLConfig2) | chipcHw_REG_PLL_CONFIG_POWER_DOWN, + &pChipcHw->PLLConfig2); REG_LOCAL_IRQ_RESTORE; } @@ -1233,7 +1238,8 @@ static inline void chipcHw_pll2Disable(void) static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; + writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE, + &pChipcHw->Spare1); REG_LOCAL_IRQ_RESTORE; } @@ -1245,7 +1251,8 @@ static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) static inline void chipcHw_ddrPhaseAlignInterruptDisable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; + writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE, + &pChipcHw->Spare1); REG_LOCAL_IRQ_RESTORE; } @@ -1333,7 +1340,8 @@ static inline void chipcHw_ddrHwPhaseAlignDisable(void) static inline void chipcHw_vpmSwPhaseAlignEnable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; + writel(readl(&pChipcHw->VPMPhaseCtrl1) | chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE, + &pChipcHw->VPMPhaseCtrl1); REG_LOCAL_IRQ_RESTORE; } @@ -1372,7 +1380,8 @@ static inline void chipcHw_vpmHwPhaseAlignEnable(void) static inline void chipcHw_vpmHwPhaseAlignDisable(void) { REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; + writel(readl(&pChipcHw->VPMPhaseCtrl1) & ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE, + &pChipcHw->VPMPhaseCtrl1); REG_LOCAL_IRQ_RESTORE; } @@ -1474,8 +1483,8 @@ chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin) /****************************************************************************/ static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; } /****************************************************************************/ @@ -1488,8 +1497,8 @@ static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) /****************************************************************************/ static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; } /****************************************************************************/ @@ -1500,8 +1509,8 @@ static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) /****************************************************************************/ static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> chipcHw_REG_DDR_PHASE_STATUS_SHIFT; } @@ -1513,8 +1522,8 @@ static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) /****************************************************************************/ static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> chipcHw_REG_VPM_PHASE_STATUS_SHIFT; } @@ -1526,8 +1535,8 @@ static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) /****************************************************************************/ static inline uint32_t chipcHw_getDdrPhaseControl(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> chipcHw_REG_DDR_PHASE_CTRL_SHIFT; } @@ -1539,8 +1548,8 @@ static inline uint32_t chipcHw_getDdrPhaseControl(void) /****************************************************************************/ static inline uint32_t chipcHw_getVpmPhaseControl(void) { - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> + return (readl(&pChipcHw-> + PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> chipcHw_REG_VPM_PHASE_CTRL_SHIFT; } diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h index b162448f613c..26f5d0e4e1dd 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h @@ -24,7 +24,7 @@ #define CHIPCHW_REG_H #include <mach/csp/mm_io.h> -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/csp/ddrcReg.h> #define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC @@ -131,8 +131,8 @@ typedef struct { uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */ } chipcHw_REG_t; -#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS) -#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC) +#define pChipcHw ((chipcHw_REG_t __iomem *) chipcHw_BASE_ADDRESS) +#define pChipcPhysical (MM_ADDR_IO_CHIPC) #define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000 #define chipcHw_REG_CHIPID_BASE_SHIFT 12 diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h index f1b68e26fa6d..39da2c1fdafb 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h @@ -30,8 +30,8 @@ extern "C" { /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> -#include <csp/stdint.h> +#include <mach/csp/reg.h> +#include <linux/types.h> #include <mach/csp/mm_io.h> @@ -416,7 +416,7 @@ extern "C" { } ddrcReg_PHY_ADDR_CTL_REG_t; #define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400 -#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) +#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t __iomem*) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) /* @todo These SS definitions are duplicates of ones below */ diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h index e6a1dc484ca7..9dc90f46a84d 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h @@ -23,9 +23,9 @@ #ifndef _DMACHW_H #define _DMACHW_H -#include <stddef.h> +#include <linux/stddef.h> -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/dmacHw_reg.h> /* Define DMA Channel ID using DMA controller number (m) and channel number (c). diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index d67e2f8c22de..9d9455e0c391 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h @@ -24,7 +24,7 @@ #ifndef _DMACHW_PRIV_H #define _DMACHW_PRIV_H -#include <csp/stdint.h> +#include <linux/types.h> /* Data type for DMA Link List Item */ typedef struct { diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h index f1ecf96f2da5..7cd0aafa6f6e 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h @@ -24,7 +24,7 @@ #ifndef _DMACHW_REG_H #define _DMACHW_REG_H -#include <csp/stdint.h> +#include <linux/types.h> #include <mach/csp/mm_io.h> /* Data type for 64 bit little endian register */ @@ -121,75 +121,75 @@ typedef struct { } dmacHw_MISC_t; /* Base registers */ -#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ -#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ +#define dmacHw_0_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ +#define dmacHw_1_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ extern uint32_t dmaChannelCount_0; extern uint32_t dmaChannelCount_1; /* Define channel specific registers */ -#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) +#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t __iomem*) ((char __iomem*)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) /* Raw interrupt status registers */ -#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) -#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) -#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) -#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) -#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) -#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) +#define dmacHw_REG_INT_RAW_BASE(module) ((char __iomem *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) +#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) +#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) +#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) +#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) +#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) /* Interrupt status registers */ -#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) -#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) -#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) -#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) -#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) -#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) +#define dmacHw_REG_INT_STAT_BASE(module) ((char __iomem*)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) +#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) +#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) +#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) +#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) +#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) /* Interrupt status registers */ -#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) -#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) -#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) -#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) -#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) -#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) +#define dmacHw_REG_INT_MASK_BASE(module) ((char __iomem*)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) +#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) +#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) +#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) +#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) +#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) /* Interrupt clear registers */ -#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) -#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) -#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) -#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) -#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) -#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) -#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) +#define dmacHw_REG_INT_CLEAR_BASE(module) ((char __iomem*)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) +#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) +#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) +#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) +#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) +#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) +#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) /* Software handshaking registers */ -#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) -#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) +#define dmacHw_REG_SW_HS_BASE(module) ((char __iomem*)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) +#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) +#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) +#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) +#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) /* Miscellaneous registers */ -#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) -#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) -#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) -#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) -#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) -#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) -#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) -#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) -#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) -#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) -#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) -#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) -#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) -#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) -#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) +#define dmacHw_REG_MISC_BASE(module) ((char __iomem*)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) +#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) +#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) +#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) +#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) +#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) +#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) +#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) +#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) +#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) +#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) +#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) +#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) +#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) +#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) +#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) +#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) /* Channel control registers */ #define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo) diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h index cfa91bed9d34..27f59dd27792 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h @@ -18,7 +18,7 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <cfg_global.h> +#include <mach/cfg_global.h> #include <mach/csp/cap_inline.h> #if defined(__KERNEL__) diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index 0aeb6a6fe7f8..f59db25b5632 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -27,8 +27,8 @@ #define _INTCHW_REG_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> -#include <csp/reg.h> +#include <linux/types.h> +#include <mach/csp/reg.h> #include <mach/csp/mm_io.h> /* ---- Public Constants and Types --------------------------------------- */ @@ -37,9 +37,9 @@ #define INTCHW_NUM_INTC 3 /* Defines for interrupt controllers. This simplifies and cleans up the function calls. */ -#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0) -#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1) -#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC) +#define INTCHW_INTC0 (MM_IO_BASE_INTC0) +#define INTCHW_INTC1 (MM_IO_BASE_INTC1) +#define INTCHW_SINTC (MM_IO_BASE_SINTC) /* INTC0 - interrupt controller 0 */ #define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */ @@ -232,15 +232,15 @@ /* ---- Public Variable Externs ------------------------------------------ */ /* ---- Public Function Prototypes --------------------------------------- */ /* Clear one or more IRQ interrupts. */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask) +static inline void intcHw_irq_disable(void __iomem *basep, uint32_t mask) { - __REG32(basep + INTCHW_INTENCLEAR) = mask; + writel(mask, basep + INTCHW_INTENCLEAR); } /* Enables one or more IRQ interrupts. */ -static inline void intcHw_irq_enable(void *basep, uint32_t mask) +static inline void intcHw_irq_enable(void __iomem *basep, uint32_t mask) { - __REG32(basep + INTCHW_INTENABLE) = mask; + writel(mask, basep + INTCHW_INTENABLE); } #endif /* _INTCHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h index ad58cf873377..d571962f2904 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h @@ -29,7 +29,7 @@ /* ---- Include Files ---------------------------------------------------- */ #if !defined(CSP_SIMULATION) -#include <cfg_global.h> +#include <mach/cfg_global.h> #endif /* ---- Public Constants and Types --------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h index de92ec6a01aa..47450c23685a 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h +++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h @@ -30,7 +30,7 @@ #include <mach/csp/mm_addr.h> #if !defined(CSP_SIMULATION) -#include <cfg_global.h> +#include <mach/cfg_global.h> #endif /* ---- Public Constants and Types --------------------------------------- */ @@ -49,7 +49,7 @@ #ifdef __ASSEMBLY__ #define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)) #else -#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ +#define MM_IO_PHYS_TO_VIRT(phys) (void __iomem *)(((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))) #endif #endif @@ -60,8 +60,8 @@ #ifdef __ASSEMBLY__ #define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)) #else -#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ - ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))) +#define MM_IO_VIRT_TO_PHYS(virt) (((unsigned long)(virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ + ((((unsigned long)(virt) & 0x0F000000) << 4) | ((unsigned long)(virt) & 0xFFFFFF))) #endif #endif diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/mach/csp/reg.h index 56654d23c3d7..d9cbdca8cd25 100644 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/reg.h @@ -25,13 +25,14 @@ /* ---- Include Files ---------------------------------------------------- */ -#include <csp/stdint.h> +#include <linux/types.h> +#include <linux/io.h> /* ---- Public Constants and Types --------------------------------------- */ -#define __REG32(x) (*((volatile uint32_t *)(x))) -#define __REG16(x) (*((volatile uint16_t *)(x))) -#define __REG8(x) (*((volatile uint8_t *) (x))) +#define __REG32(x) (*((volatile uint32_t __iomem *)(x))) +#define __REG16(x) (*((volatile uint16_t __iomem *)(x))) +#define __REG8(x) (*((volatile uint8_t __iomem *) (x))) /* Macros used to define a sequence of reserved registers. The start / end */ /* are byte offsets in the particular register definition, with the "end" */ @@ -84,31 +85,31 @@ #endif -static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value) +static inline void reg32_modify_and(volatile uint32_t __iomem *reg, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg &= value; + __raw_writel(__raw_readl(reg) & value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value) +static inline void reg32_modify_or(volatile uint32_t __iomem *reg, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg |= value; + __raw_writel(__raw_readl(reg) | value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask, +static inline void reg32_modify_mask(volatile uint32_t __iomem *reg, uint32_t mask, uint32_t value) { REG_LOCAL_IRQ_SAVE; - *reg = (*reg & mask) | value; + __raw_writel((__raw_readl(reg) & mask) | value, reg); REG_LOCAL_IRQ_RESTORE; } -static inline void reg32_write(volatile uint32_t *reg, uint32_t value) +static inline void reg32_write(volatile uint32_t __iomem *reg, uint32_t value) { - *reg = value; + __raw_writel(value, reg); } #endif /* CSP_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h index 9cd6a032ab71..55d3cd4fd1e7 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h @@ -34,7 +34,7 @@ /****************************************************************************/ static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; if (mask & 0x0000FFFF) { regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF; @@ -53,13 +53,13 @@ static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK /****************************************************************************/ static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF; + writel(mask & 0x0000FFFF, ®p->reg[secHw_IDX_LS].setUnsecure); } if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16; + writel(mask >> 16, ®p->reg[secHw_IDX_MS].setUnsecure); } } @@ -71,7 +71,7 @@ static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MA /****************************************************************************/ static inline uint32_t secHw_getStatus(void) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; + secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC; return (regp->reg[1].status << 16) + regp->reg[0].status; } diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h index 2cbb530db8ea..1cc882ae60f5 100644 --- a/arch/arm/mach-bcmring/include/csp/tmrHw.h +++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h @@ -23,7 +23,7 @@ #ifndef _TMRHW_H #define _TMRHW_H -#include <csp/stdint.h> +#include <linux/types.h> typedef uint32_t tmrHw_ID_t; /* Timer ID */ typedef uint32_t tmrHw_COUNT_t; /* Timer count */ diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 72543781207b..13e01384d6fc 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -27,7 +27,7 @@ #include <linux/kernel.h> #include <linux/semaphore.h> -#include <csp/dmacHw.h> +#include <mach/csp/dmacHw.h> #include <mach/timer.h> /* ---- Constants and Types ---------------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index 6ae20a649a97..a0c92b4b8c60 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -22,7 +22,7 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> #include <mach/csp/mm_io.h> /* Hardware addresses of major areas. diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h index 387376ffb56b..f8d51a8b0b15 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_nand.h +++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -30,7 +30,7 @@ #define __ASM_ARCH_REG_NAND_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/reg_umi.h> /* ---- Constants and Types ---------------------------------------------- */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 0992842caa77..56dd9de7d83f 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -30,7 +30,7 @@ #define __ASM_ARCH_REG_UMI_H /* ---- Include Files ---------------------------------------------------- */ -#include <csp/reg.h> +#include <mach/csp/reg.h> #include <mach/csp/mm_io.h> /* ---- Constants and Types ---------------------------------------------- */ @@ -233,5 +233,5 @@ #define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 /* location within a page (512 byte) */ #define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 -#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (readl(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) #endif diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c index 1adec78ec940..33824a81cac4 100644 --- a/arch/arm/mach-bcmring/mm.c +++ b/arch/arm/mach-bcmring/mm.c @@ -20,12 +20,12 @@ #include <mach/hardware.h> #include <mach/csp/mm_io.h> -#define IO_DESC(va, sz) { .virtual = va, \ +#define IO_DESC(va, sz) { .virtual = (unsigned long)va, \ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ .length = sz, \ .type = MT_DEVICE } -#define MEM_DESC(va, sz) { .virtual = va, \ +#define MEM_DESC(va, sz) { .virtual = (unsigned long)va, \ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ .length = sz, \ .type = MT_MEMORY } diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c index af9c3d7e2a0c..59412903466e 100644 --- a/arch/arm/mach-bcmring/timer.c +++ b/arch/arm/mach-bcmring/timer.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <linux/module.h> -#include <csp/tmrHw.h> +#include <mach/csp/tmrHw.h> #include <mach/timer.h> /* The core.c file initializes timers 1 and 3 as a linux clocksource. */ diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 6321567d8eaa..cc4c6a5a357c 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -49,16 +49,6 @@ static struct map_desc dove_io_desc[] __initdata = { .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), .length = DOVE_NB_REGS_SIZE, .type = MT_DEVICE, - }, { - .virtual = DOVE_PCIE0_IO_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE), - .length = DOVE_PCIE0_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = DOVE_PCIE1_IO_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE), - .length = DOVE_PCIE1_IO_SIZE, - .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index d52b0ef313b7..c91e3004a47b 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -50,14 +50,12 @@ #define DOVE_NB_REGS_SIZE SZ_8M #define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 -#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000 #define DOVE_PCIE0_IO_BUS_BASE 0x00000000 -#define DOVE_PCIE0_IO_SIZE SZ_1M +#define DOVE_PCIE0_IO_SIZE SZ_64K #define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 -#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000 -#define DOVE_PCIE1_IO_BUS_BASE 0x00100000 -#define DOVE_PCIE1_IO_SIZE SZ_1M +#define DOVE_PCIE1_IO_BUS_BASE 0x00010000 +#define DOVE_PCIE1_IO_SIZE SZ_64K /* * Dove Core Registers Map diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h deleted file mode 100644 index 29c8b85355a5..000000000000 --- a/arch/arm/mach-dove/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "dove.h" - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \ - DOVE_PCIE0_IO_VIRT_BASE)) - -#endif diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 47921b0cdc65..355332d502cb 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -26,9 +26,8 @@ struct pcie_port { u8 root_bus_nr; void __iomem *base; spinlock_t conf_lock; - char io_space_name[16]; char mem_space_name[16]; - struct resource res[2]; + struct resource res; }; static struct pcie_port pcie_port[2]; @@ -53,24 +52,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_setup(pp->base); - /* - * IORESOURCE_IO - */ - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d I/O", pp->index); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - if (pp->index == 0) { - pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE; - pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1; - } else { - pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE; - pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1; - } - pp->res[0].flags = IORESOURCE_IO; - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + if (pp->index == 0) + pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE); + else + pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE); /* * IORESOURCE_MEM @@ -78,18 +63,18 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d MEM", pp->index); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; + pp->res.name = pp->mem_space_name; if (pp->index == 0) { - pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1; + pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE; + pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1; } else { - pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1; + pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE; + pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1; } - pp->res[1].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[1])) + pp->res.flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res)) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); return 1; } @@ -210,7 +195,7 @@ static void __init add_pcie_port(int index, unsigned long base) pp->root_bus_nr = -1; pp->base = (void __iomem *)base; spin_lock_init(&pp->conf_lock); - memset(pp->res, 0, sizeof(pp->res)); + memset(&pp->res, 0, sizeof(pp->res)); } else { printk(KERN_INFO "link down, ignoring\n"); } diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 3e6aaa6361da..a42b369bc439 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> - + #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> @@ -26,6 +26,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "common.h" @@ -175,11 +176,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .pfn = __phys_to_pfn(DC21285_PCI_IACK), .length = PCIIACK_SIZE, .type = MT_DEVICE, - }, { - .virtual = PCIO_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_IO), - .length = PCIO_SIZE, - .type = MT_DEVICE, }, #endif }; @@ -196,8 +192,10 @@ void __init footbridge_map_io(void) * Now, work out what we've got to map in addition on this * platform. */ - if (footbridge_cfn_mode()) + if (footbridge_cfn_mode()) { iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); + } } void footbridge_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 9d62e3381024..a7cd2cf5e08d 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -276,8 +276,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = DC21285_PCI_MEM; - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); + pci_ioremap_io(0, DC21285_PCI_IO); + pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); @@ -298,7 +298,7 @@ void __init dc21285_preinit(void) mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) if (mem_mask >= mem_size) - break; + break; /* * These registers need to be set up whether we're the @@ -350,14 +350,6 @@ void __init dc21285_preinit(void) "PCI data parity", NULL); if (cfn_mode) { - static struct resource csrio; - - csrio.flags = IORESOURCE_IO; - csrio.name = "Footbridge"; - - allocate_resource(&ioport_resource, &csrio, 128, - 0xff00, 0xffff, 128, NULL, NULL); - /* * Map our SDRAM at a known address in PCI space, just in case * the firmware had other ideas. Using a nonzero base is @@ -365,7 +357,7 @@ void __init dc21285_preinit(void) * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). */ *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = csrio.start; + *CSR_PCICSRIOBASE = 0; *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); *CSR_PCIROMBASE = 0; *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index e5acde25ffc5..c169f0c99b2a 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,7 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv, tmp mov \rp, #0x000003f8 - orr \rv, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00e00000 @ virtual orr \rp, \rp, #0x7c000000 @ physical .endm diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index aba531eebbc6..aba46388cc0c 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -14,18 +14,10 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#ifdef CONFIG_MMU -#define MMU_IO(a, b) (a) -#else -#define MMU_IO(a, b) (b) -#endif - -#define PCIO_SIZE 0x00100000 -#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) - /* - * Translation of various region addresses to virtual addresses + * Translation of various i/o addresses to host addresses for !CONFIG_MMU */ +#define PCIO_BASE 0x7c000000 #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) #endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index d004d37ad9d8..d1204198ca83 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -13,7 +13,7 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ - clk-pfd.o clk-busy.o + clk-pfd.o clk-busy.o clk.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index ea13e61bd5f3..cf65148bc519 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -23,7 +23,6 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/clkdev.h> #include <linux/err.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 4bdcaa97bd98..f89c4403a922 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -39,10 +39,10 @@ static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; static const char *emi_slow_sel[] = { "main_bus", "ahb", }; static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; -static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", }; +static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", }; static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", }; -static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", }; +static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", }; static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index 2d856f9ccf59..02be73178912 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -6,7 +6,7 @@ #include <linux/err.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/clock.h> + #include "clk.h" /** @@ -29,8 +29,53 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pllv1 *pll = to_clk_pllv1(hw); + long long ll; + int mfn_abs; + unsigned int mfi, mfn, mfd, pd; + u32 reg; + unsigned long rate; + + reg = readl(pll->base); + + /* + * Get the resulting clock rate from a PLL register value and the input + * frequency. PLLs with this register layout can be found on i.MX1, + * i.MX21, i.MX27 and i,MX31 + * + * mfi + mfn / (mfd + 1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ + + mfi = (reg >> 10) & 0xf; + mfn = reg & 0x3ff; + mfd = (reg >> 16) & 0x3ff; + pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + mfn_abs = mfn; + + /* + * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit + * 2's complements number + */ + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + mfn_abs = 0x400 - mfn; + + rate = parent_rate * 2; + rate /= pd + 1; + + ll = (unsigned long long)rate * mfn_abs; + + do_div(ll, mfd + 1); + + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + ll = -ll; + + ll = (rate * mfi) + ll; - return mxc_decode_pll(readl(pll->base), parent_rate); + return ll; } struct clk_ops clk_pllv1_ops = { diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c new file mode 100644 index 000000000000..f5e8be8e7f11 --- /dev/null +++ b/arch/arm/mach-imx/clk.c @@ -0,0 +1,3 @@ +#include <linux/spinlock.h> + +DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 1bf64fe2523c..5f2d8acca25f 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -3,7 +3,8 @@ #include <linux/spinlock.h> #include <linux/clk-provider.h> -#include <mach/clock.h> + +extern spinlock_t imx_ccm_lock; struct clk *imx_clk_pllv1(const char *name, const char *parent, void __iomem *base); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 5d08533ab2c7..8dc9d3edf17a 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,7 +36,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/clock.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx3.h> diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h deleted file mode 100644 index 8de70de3dd0a..000000000000 --- a/arch/arm/mach-integrator/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) - -#endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index ec467baade09..4c0347526851 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,6 +324,10 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 + /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 3b2267529f5e..fd3ef28d2c1a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -50,6 +50,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include <asm/mach/time.h> #include <plat/fpga-irq.h> @@ -73,7 +74,7 @@ * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M) * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M) * ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k) - * ee000000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) + * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) * ef000000 Cache flush * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers @@ -147,11 +148,6 @@ static struct map_desc ap_io_desc[] __initdata = { .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE), .length = SZ_64K, .type = MT_DEVICE - }, { - .virtual = PCI_IO_VADDR, - .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE), - .length = SZ_64K, - .type = MT_DEVICE } }; @@ -159,6 +155,7 @@ static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); vga_base = PCI_MEMORY_VADDR; + pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); } #define INTEGRATOR_SC_VALID_INT 0x003fffff diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index b866880e82ac..495f181fc937 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -41,61 +41,61 @@ /* * The V3 PCI interface chip in Integrator provides several windows from * local bus memory into the PCI memory areas. Unfortunately, there - * are not really enough windows for our usage, therefore we reuse + * are not really enough windows for our usage, therefore we reuse * one of the windows for access to PCI configuration space. The * memory map is as follows: - * + * * Local Bus Memory Usage - * + * * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable * 60000000 - 60FFFFFF PCI IO. 16M * 61000000 - 61FFFFFF PCI Configuration. 16M - * + * * There are three V3 windows, each described by a pair of V3 registers. * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2. * Base0 and Base1 can be used for any type of PCI memory access. Base2 * can be used either for PCI I/O or for I20 accesses. By default, uHAL * uses this only for PCI IO space. - * + * * Normally these spaces are mapped using the following base registers: - * + * * Usage Local Bus Memory Base/Map registers used - * + * * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 * Cfg 61000000 - 61FFFFFF - * + * * This means that I20 and PCI configuration space accesses will fail. - * When PCI configuration accesses are needed (via the uHAL PCI + * When PCI configuration accesses are needed (via the uHAL PCI * configuration space primitives) we must remap the spaces as follows: - * + * * Usage Local Bus Memory Base/Map registers used - * + * * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1 - * + * * To make this work, the code depends on overlapping windows working. - * The V3 chip translates an address by checking its range within + * The V3 chip translates an address by checking its range within * each of the BASE/MAP pairs in turn (in ascending register number * order). It will use the first matching pair. So, for example, * if the same address is mapped by both LB_BASE0/LB_MAP0 and - * LB_BASE1/LB_MAP1, the V3 will use the translation from + * LB_BASE1/LB_MAP1, the V3 will use the translation from * LB_BASE0/LB_MAP0. - * + * * To allow PCI Configuration space access, the code enlarges the * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can * be remapped for use by configuration cycles. - * - * At the end of the PCI Configuration space accesses, + * + * At the end of the PCI Configuration space accesses, * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to * reveal the now restored LB_BASE1/LB_MAP1 window. - * + * * NOTE: We do not set up I2O mapping. I suspect that this is only * for an intelligent (target) device. Using I2O disables most of * the mappings into PCI memory. @@ -127,8 +127,8 @@ * * returns: configuration address to play on the PCI bus * - * To generate the appropriate PCI configuration cycles in the PCI - * configuration address space, you present the V3 with the following pattern + * To generate the appropriate PCI configuration cycles in the PCI + * configuration address space, you present the V3 with the following pattern * (which is very nearly a type 1 (except that the lower two bits are 00 and * not 01). In order for this mapping to work you need to set up one of * the local to PCI aperatures to 16Mbytes in length translating to @@ -138,7 +138,7 @@ * * Type 0: * - * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0| @@ -150,7 +150,7 @@ * * Type 1: * - * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| @@ -161,7 +161,7 @@ * 15:11 Device number (5 bits) * 10:8 function number * 7:2 register number - * + * */ static DEFINE_RAW_SPINLOCK(v3_lock); @@ -374,12 +374,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) } /* - * the IO resource for this bus * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -498,7 +495,6 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; - pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; /* diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h deleted file mode 100644 index f13188518025..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * iop13xx custom ioremap implementation - * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __iop13xx_io(a) - -extern void __iomem * __iop13xx_io(unsigned long io_addr); - -#endif diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h index e190dcd7d72d..e10e101645dd 100644 --- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h +++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h @@ -69,21 +69,11 @@ extern unsigned long get_iop_tick_rate(void); * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window * * IO MAP - * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window - * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window + * 0x00000 + 64K 0x0.fffb.0000 0xfee0.0000 PCIX outbound i/o window + * 0x10000 + 64K 0x0.fffd.0000 0xfee1.0000 PCIE outbound i/o window */ -#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL -#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL #define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIX_LOWER_IO_PA\ - - IOP13XX_PCIX_LOWER_IO_VA)) #define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL #define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL @@ -103,20 +93,8 @@ extern unsigned long get_iop_tick_rate(void); IOP13XX_PCIX_LOWER_MEM_BA) /* PCI-E ranges */ -#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL #define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL -#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL -#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIE_LOWER_IO_PA\ - - IOP13XX_PCIE_LOWER_IO_VA)) +#define IOP13XX_PCIE_LOWER_IO_BA 0x10000UL /* OIOTVR */ #define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL #define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c index 3c364198db9c..851dc8f2b6b5 100644 --- a/arch/arm/mach-iop13xx/io.c +++ b/arch/arm/mach-iop13xx/io.c @@ -23,25 +23,6 @@ #include "pci.h" -void * __iomem __iop13xx_io(unsigned long io_addr) -{ - void __iomem * io_virt; - - switch (io_addr) { - case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA: - io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr); - break; - case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA: - io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr); - break; - default: - BUG(); - } - - return io_virt; -} -EXPORT_SYMBOL(__iop13xx_io); - static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie, size_t size, unsigned int mtype, void *caller) { @@ -67,12 +48,6 @@ static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie, (cookie - IOP13XX_PBI_LOWER_MEM_RA), size, mtype, __builtin_return_address(0)); break; - case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA: - retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie); - break; - case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA: - retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie); - break; case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA: retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie); break; @@ -99,8 +74,6 @@ static void __iop13xx_iounmap(volatile void __iomem *addr) goto skip; switch ((u32) addr) { - case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA: - case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA: case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA: goto skip; } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 861cb12ef436..91f731a2957b 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -970,7 +970,6 @@ void __init iop13xx_pci_init(void) __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR); /* Setup the Min Address for PCI memory... */ - pcibios_min_io = 0; pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA; /* if Linux is given control of an ATU @@ -1003,7 +1002,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr > 1) return 0; - res = kcalloc(2, sizeof(struct resource), GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); @@ -1042,17 +1041,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) << IOP13XX_ATUX_PCIXSR_FUNC_NUM; __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR); - res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET; - res[0].end = IOP13XX_PCIX_UPPER_IO_PA; - res[0].name = "IQ81340 ATUX PCI I/O Space"; - res[0].flags = IORESOURCE_IO; + pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA); - res[1].start = IOP13XX_PCIX_LOWER_MEM_RA; - res[1].end = IOP13XX_PCIX_UPPER_MEM_RA; - res[1].name = "IQ81340 ATUX PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; + res->start = IOP13XX_PCIX_LOWER_MEM_RA; + res->end = IOP13XX_PCIX_UPPER_MEM_RA; + res->name = "IQ81340 ATUX PCI Memory Space"; + res->flags = IORESOURCE_MEM; sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET; - sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA; break; case IOP13XX_INIT_ATU_ATUE: /* Note: the function number field in the PCSR is ro */ @@ -1063,17 +1058,13 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) __raw_writel(pcsr, IOP13XX_ATUE_PCSR); - res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET; - res[0].end = IOP13XX_PCIE_UPPER_IO_PA; - res[0].name = "IQ81340 ATUE PCI I/O Space"; - res[0].flags = IORESOURCE_IO; + pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA); - res[1].start = IOP13XX_PCIE_LOWER_MEM_RA; - res[1].end = IOP13XX_PCIE_UPPER_MEM_RA; - res[1].name = "IQ81340 ATUE PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; + res->start = IOP13XX_PCIE_LOWER_MEM_RA; + res->end = IOP13XX_PCIE_UPPER_MEM_RA; + res->name = "IQ81340 ATUE PCI Memory Space"; + res->flags = IORESOURCE_MEM; sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET; - sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA; sys->map_irq = iop13xx_pcie_map_irq; break; default: @@ -1081,11 +1072,9 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) return 0; } - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); + request_resource(&iomem_resource, res); - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index daabb1fa6c2c..4a7f20d7fb6e 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -40,16 +40,6 @@ static struct map_desc iop13xx_std_desc[] __initdata = { .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE), .length = IOP13XX_PMMR_SIZE, .type = MT_DEVICE, - }, { /* PCIE IO space */ - .virtual = IOP13XX_PCIE_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA), - .length = IOP13XX_PCIX_IO_WINDOW_SIZE, - .type = MT_DEVICE, - }, { /* PCIX IO space */ - .virtual = IOP13XX_PCIX_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA), - .length = IOP13XX_PCIX_IO_WINDOW_SIZE, - .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h deleted file mode 100644 index e2ada265bb8d..000000000000 --- a/arch/arm/mach-iop32x/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include <asm/hardware/iop3xx.h> - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) - -#endif diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h deleted file mode 100644 index f7c1b6595660..000000000000 --- a/arch/arm/mach-iop33x/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include <asm/hardware/iop3xx.h> - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) - -#endif diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3226077735b1..936b31df644c 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -42,16 +42,6 @@ ****************************************************************************/ static struct map_desc kirkwood_io_desc[] __initdata = { { - .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE), - .length = KIRKWOOD_PCIE_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE), - .length = KIRKWOOD_PCIE1_IO_SIZE, - .type = MT_DEVICE, - }, { .virtual = KIRKWOOD_REGS_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), .length = KIRKWOOD_REGS_SIZE, diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h deleted file mode 100644 index 5d0ab61700d2..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "kirkwood.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE) - + KIRKWOOD_PCIE_IO_VIRT_BASE); -} - -#define __io(a) __io(a) - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index c5b68510776b..af4f0000dcef 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -37,14 +37,12 @@ #define KIRKWOOD_NAND_MEM_SIZE SZ_1K #define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 -#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000 -#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M +#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000 +#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000 #define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_1M +#define KIRKWOOD_PCIE_IO_SIZE SZ_64K #define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 #define KIRKWOOD_REGS_VIRT_BASE 0xfed00000 diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 6e8b2efa3c35..532d8acb38f9 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -56,7 +56,7 @@ struct pcie_port { void __iomem *base; spinlock_t conf_lock; int irq; - struct resource res[2]; + struct resource res; }; static int pcie_port_map[2]; @@ -137,20 +137,12 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) pp->irq = IRQ_KIRKWOOD_PCIE; /* - * IORESOURCE_IO - */ - pp->res[0].name = "PCIe 0 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; - pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; - pp->res[0].flags = IORESOURCE_IO; - - /* * IORESOURCE_MEM */ - pp->res[1].name = "PCIe 0 MEM"; - pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; - pp->res[1].flags = IORESOURCE_MEM; + pp->res.name = "PCIe 0 MEM"; + pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1; + pp->res.flags = IORESOURCE_MEM; } static void __init pcie1_ioresources_init(struct pcie_port *pp) @@ -159,20 +151,12 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp) pp->irq = IRQ_KIRKWOOD_PCIE1; /* - * IORESOURCE_IO - */ - pp->res[0].name = "PCIe 1 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE; - pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1; - pp->res[0].flags = IORESOURCE_IO; - - /* * IORESOURCE_MEM */ - pp->res[1].name = "PCIe 1 MEM"; - pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1; - pp->res[1].flags = IORESOURCE_MEM; + pp->res.name = "PCIe 1 MEM"; + pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; + pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1; + pp->res.flags = IORESOURCE_MEM; } static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) @@ -197,23 +181,21 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) case 0: kirkwood_enable_pcie_clk("0"); pcie0_ioresources_init(pp); + pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE); break; case 1: kirkwood_enable_pcie_clk("1"); pcie1_ioresources_init(pp); + pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE); break; default: panic("PCIe setup: invalid controller %d", index); } - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe%d IO resource failed\n", index); - if (request_resource(&iomem_resource, &pp->res[1])) + if (request_resource(&iomem_resource, &pp->res)) panic("Request PCIe%d Memory resource failed\n", index); - sys->io_offset = 0; - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); /* * Generic PCIe unit setup. diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h deleted file mode 100644 index e620cda99d2d..000000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-timer.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-timer.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Timer registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_TIMER_H -#define KS8695_TIMER_H - -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) -#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) - - -/* - * Timer registers - */ -#define KS8695_TMCON (0x00) /* Timer Control Register */ -#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ -#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ -#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ - - -/* Timer Control Register */ -#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ - -/* Timer0 Timeout Counter Register */ -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ - - -#endif diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index ec783a3070ae..46c84bc7792c 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -25,53 +25,98 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/clockchips.h> #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/regs-timer.h> #include <mach/regs-irq.h> #include "generic.h" +#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) +#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) +#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) + /* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() + * Timer registers */ -static unsigned long ks8695_gettimeoffset (void) +#define KS8695_TMCON (0x00) /* Timer Control Register */ +#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ +#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ +#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ +#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ + +/* Timer Control Register */ +#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ +#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ + +/* Timer0 Timeout Counter Register */ +#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ + +static void ks8695_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { - unsigned long elapsed, tick2, intpending; + u32 tmcon; - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for an - * interrupt. We solve this by ensuring that the counter has not - * reloaded between our two reads. - */ - elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD); - do { - tick2 = elapsed; - intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1); - elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD); - } while (elapsed > tick2); - - /* Convert to number of ticks expired (not remaining) */ - elapsed = (CLOCK_TICK_RATE / HZ) - elapsed; - - /* Is interrupt pending? If so, then timer has been reloaded already. */ - if (intpending) - elapsed += (CLOCK_TICK_RATE / HZ); - - /* Convert ticks to usecs */ - return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + if (mode == CLOCK_EVT_FEAT_PERIODIC) { + u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); + u32 half = DIV_ROUND_CLOSEST(rate, 2); + + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); + + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + } } +static int ks8695_set_next_event(unsigned long cycles, + struct clock_event_device *evt) + +{ + u32 half = DIV_ROUND_CLOSEST(cycles, 2); + u32 tmcon; + + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); + + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + return 0; +} + +static struct clock_event_device clockevent_ks8695 = { + .name = "ks8695_t1tc", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .set_next_event = ks8695_set_next_event, + .set_mode = ks8695_set_mode, +}; + /* * IRQ handler for the timer. */ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) { - timer_tick(); + struct clock_event_device *evt = &clockevent_ks8695; + + evt->event_handler(evt); return IRQ_HANDLED; } @@ -83,18 +128,22 @@ static struct irqaction ks8695_timer_irq = { static void ks8695_timer_setup(void) { - unsigned long tmout = CLOCK_TICK_RATE / HZ; unsigned long tmcon; - /* disable timer1 */ - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON); - - __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC); - __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD); + /* Disable timer 0 and 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= ~TMCON_T0EN; + tmcon &= ~TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - /* re-enable timer1 */ - __raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON); + /* + * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles + * (one on each counter) maximum 2*2^32, but the API will only + * accept up to a 32bit full word (0xFFFFFFFFU). + */ + clockevents_config_and_register(&clockevent_ks8695, + KS8695_CLOCK_RATE, 2, + 0xFFFFFFFFU); } static void __init ks8695_timer_init (void) @@ -107,8 +156,6 @@ static void __init ks8695_timer_init (void) struct sys_timer ks8695_timer = { .init = ks8695_timer_init, - .offset = ks8695_gettimeoffset, - .resume = ks8695_timer_setup, }; void ks8695_restart(char mode, const char *cmd) @@ -119,12 +166,12 @@ void ks8695_restart(char mode, const char *cmd) soft_restart(0); /* disable timer0 */ - reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); /* enable watchdog mode */ - __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); + writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); /* re-enable timer0 */ - __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); } diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index b786f7e6cd1f..095c155d6fb8 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -2,13 +2,19 @@ # Makefile for Marvell's PXA168 processors line # -obj-y += common.o clock.o devices.o time.o irq.o +obj-y += common.o devices.o time.o irq.o # SoC support obj-$(CONFIG_CPU_PXA168) += pxa168.o obj-$(CONFIG_CPU_PXA910) += pxa910.o obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o +ifeq ($(CONFIG_COMMON_CLK), ) +obj-y += clock.o +obj-$(CONFIG_CPU_PXA168) += clock-pxa168.o +obj-$(CONFIG_CPU_PXA910) += clock-pxa910.o +obj-$(CONFIG_CPU_MMP2) += clock-mmp2.o +endif ifeq ($(CONFIG_PM),y) obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c new file mode 100644 index 000000000000..21d22002cd19 --- /dev/null +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -0,0 +1,111 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/addr-map.h> + +#include "common.h" +#include "clock.h" + +/* + * APB Clock register offsets for MMP2 + */ +#define APBC_RTC APBC_REG(0x000) +#define APBC_TWSI1 APBC_REG(0x004) +#define APBC_TWSI2 APBC_REG(0x008) +#define APBC_TWSI3 APBC_REG(0x00c) +#define APBC_TWSI4 APBC_REG(0x010) +#define APBC_KPC APBC_REG(0x018) +#define APBC_UART1 APBC_REG(0x02c) +#define APBC_UART2 APBC_REG(0x030) +#define APBC_UART3 APBC_REG(0x034) +#define APBC_GPIO APBC_REG(0x038) +#define APBC_PWM0 APBC_REG(0x03c) +#define APBC_PWM1 APBC_REG(0x040) +#define APBC_PWM2 APBC_REG(0x044) +#define APBC_PWM3 APBC_REG(0x048) +#define APBC_SSP0 APBC_REG(0x04c) +#define APBC_SSP1 APBC_REG(0x050) +#define APBC_SSP2 APBC_REG(0x054) +#define APBC_SSP3 APBC_REG(0x058) +#define APBC_SSP4 APBC_REG(0x05c) +#define APBC_SSP5 APBC_REG(0x060) +#define APBC_TWSI5 APBC_REG(0x07c) +#define APBC_TWSI6 APBC_REG(0x080) +#define APBC_UART4 APBC_REG(0x088) + +#define APMU_USB APMU_REG(0x05c) +#define APMU_NAND APMU_REG(0x060) +#define APMU_SDH0 APMU_REG(0x054) +#define APMU_SDH1 APMU_REG(0x058) +#define APMU_SDH2 APMU_REG(0x0e8) +#define APMU_SDH3 APMU_REG(0x0ec) + +static void sdhc_clk_enable(struct clk *clk) +{ + uint32_t clk_rst; + + clk_rst = __raw_readl(clk->clk_rst); + clk_rst |= clk->enable_val; + __raw_writel(clk_rst, clk->clk_rst); +} + +static void sdhc_clk_disable(struct clk *clk) +{ + uint32_t clk_rst; + + clk_rst = __raw_readl(clk->clk_rst); + clk_rst &= ~clk->enable_val; + __raw_writel(clk_rst, clk->clk_rst); +} + +struct clkops sdhc_clk_ops = { + .enable = sdhc_clk_enable, + .disable = sdhc_clk_disable, +}; + +/* APB peripheral clocks */ +static APBC_CLK(uart1, UART1, 1, 26000000); +static APBC_CLK(uart2, UART2, 1, 26000000); +static APBC_CLK(uart3, UART3, 1, 26000000); +static APBC_CLK(uart4, UART4, 1, 26000000); +static APBC_CLK(twsi1, TWSI1, 0, 26000000); +static APBC_CLK(twsi2, TWSI2, 0, 26000000); +static APBC_CLK(twsi3, TWSI3, 0, 26000000); +static APBC_CLK(twsi4, TWSI4, 0, 26000000); +static APBC_CLK(twsi5, TWSI5, 0, 26000000); +static APBC_CLK(twsi6, TWSI6, 0, 26000000); +static APBC_CLK(gpio, GPIO, 0, 26000000); + +static APMU_CLK(nand, NAND, 0xbf, 100000000); +static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops); +static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops); +static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops); +static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops); + +static struct clk_lookup mmp2_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), + INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL), + INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL), + INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), + INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), +}; + +void __init mmp2_clk_init(void) +{ + clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); +} diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c new file mode 100644 index 000000000000..5e6c18ccebd4 --- /dev/null +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -0,0 +1,91 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/addr-map.h> + +#include "common.h" +#include "clock.h" + +/* + * APB clock register offsets for PXA168 + */ +#define APBC_UART1 APBC_REG(0x000) +#define APBC_UART2 APBC_REG(0x004) +#define APBC_GPIO APBC_REG(0x008) +#define APBC_PWM1 APBC_REG(0x00c) +#define APBC_PWM2 APBC_REG(0x010) +#define APBC_PWM3 APBC_REG(0x014) +#define APBC_PWM4 APBC_REG(0x018) +#define APBC_RTC APBC_REG(0x028) +#define APBC_TWSI0 APBC_REG(0x02c) +#define APBC_KPC APBC_REG(0x030) +#define APBC_TWSI1 APBC_REG(0x06c) +#define APBC_UART3 APBC_REG(0x070) +#define APBC_SSP1 APBC_REG(0x81c) +#define APBC_SSP2 APBC_REG(0x820) +#define APBC_SSP3 APBC_REG(0x84c) +#define APBC_SSP4 APBC_REG(0x858) +#define APBC_SSP5 APBC_REG(0x85c) + +#define APMU_NAND APMU_REG(0x060) +#define APMU_LCD APMU_REG(0x04c) +#define APMU_ETH APMU_REG(0x0fc) +#define APMU_USB APMU_REG(0x05c) + +/* APB peripheral clocks */ +static APBC_CLK(uart1, UART1, 1, 14745600); +static APBC_CLK(uart2, UART2, 1, 14745600); +static APBC_CLK(uart3, UART3, 1, 14745600); +static APBC_CLK(twsi0, TWSI0, 1, 33000000); +static APBC_CLK(twsi1, TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PWM1, 1, 13000000); +static APBC_CLK(pwm2, PWM2, 1, 13000000); +static APBC_CLK(pwm3, PWM3, 1, 13000000); +static APBC_CLK(pwm4, PWM4, 1, 13000000); +static APBC_CLK(ssp1, SSP1, 4, 0); +static APBC_CLK(ssp2, SSP2, 4, 0); +static APBC_CLK(ssp3, SSP3, 4, 0); +static APBC_CLK(ssp4, SSP4, 4, 0); +static APBC_CLK(ssp5, SSP5, 4, 0); +static APBC_CLK(gpio, GPIO, 0, 13000000); +static APBC_CLK(keypad, KPC, 0, 32000); +static APBC_CLK(rtc, RTC, 8, 32768); + +static APMU_CLK(nand, NAND, 0x19b, 156000000); +static APMU_CLK(lcd, LCD, 0x7f, 312000000); +static APMU_CLK(eth, ETH, 0x09, 0); +static APMU_CLK(usb, USB, 0x12, 0); + +/* device and clock bindings */ +static struct clk_lookup pxa168_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), + INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), + INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), +}; + +void __init pxa168_clk_init(void) +{ + clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); +} diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c new file mode 100644 index 000000000000..933ea71d0b56 --- /dev/null +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -0,0 +1,67 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/addr-map.h> + +#include "common.h" +#include "clock.h" + +/* + * APB Clock register offsets for PXA910 + */ +#define APBC_UART0 APBC_REG(0x000) +#define APBC_UART1 APBC_REG(0x004) +#define APBC_GPIO APBC_REG(0x008) +#define APBC_PWM1 APBC_REG(0x00c) +#define APBC_PWM2 APBC_REG(0x010) +#define APBC_PWM3 APBC_REG(0x014) +#define APBC_PWM4 APBC_REG(0x018) +#define APBC_SSP1 APBC_REG(0x01c) +#define APBC_SSP2 APBC_REG(0x020) +#define APBC_RTC APBC_REG(0x028) +#define APBC_TWSI0 APBC_REG(0x02c) +#define APBC_KPC APBC_REG(0x030) +#define APBC_SSP3 APBC_REG(0x04c) +#define APBC_TWSI1 APBC_REG(0x06c) + +#define APMU_NAND APMU_REG(0x060) +#define APMU_USB APMU_REG(0x05c) + +static APBC_CLK(uart1, UART0, 1, 14745600); +static APBC_CLK(uart2, UART1, 1, 14745600); +static APBC_CLK(twsi0, TWSI0, 1, 33000000); +static APBC_CLK(twsi1, TWSI1, 1, 33000000); +static APBC_CLK(pwm1, PWM1, 1, 13000000); +static APBC_CLK(pwm2, PWM2, 1, 13000000); +static APBC_CLK(pwm3, PWM3, 1, 13000000); +static APBC_CLK(pwm4, PWM4, 1, 13000000); +static APBC_CLK(gpio, GPIO, 0, 13000000); +static APBC_CLK(rtc, RTC, 8, 32768); + +static APMU_CLK(nand, NAND, 0x19b, 156000000); +static APMU_CLK(u2o, USB, 0x1b, 480000000); + +/* device and clock bindings */ +static struct clk_lookup pxa910_clkregs[] = { + INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), + INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), + INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), + INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL), + INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), + INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), + INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), + INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), +}; + +void __init pxa910_clk_init(void) +{ + clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs)); +} diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index 1c9d6c1ea97a..bd453274fca2 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -7,3 +7,6 @@ extern void timer_init(int irq); extern void __init icu_init_irq(void); extern void __init mmp_map_io(void); extern void mmp_restart(char, const char *); +extern void __init pxa168_clk_init(void); +extern void __init pxa910_clk_init(void); +extern void __init mmp2_clk_init(void); diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 68b0c93ec6a1..ddc812f40341 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -13,101 +13,6 @@ #include <mach/addr-map.h> -/* - * APB clock register offsets for PXA168 - */ -#define APBC_PXA168_UART1 APBC_REG(0x000) -#define APBC_PXA168_UART2 APBC_REG(0x004) -#define APBC_PXA168_GPIO APBC_REG(0x008) -#define APBC_PXA168_PWM1 APBC_REG(0x00c) -#define APBC_PXA168_PWM2 APBC_REG(0x010) -#define APBC_PXA168_PWM3 APBC_REG(0x014) -#define APBC_PXA168_PWM4 APBC_REG(0x018) -#define APBC_PXA168_RTC APBC_REG(0x028) -#define APBC_PXA168_TWSI0 APBC_REG(0x02c) -#define APBC_PXA168_KPC APBC_REG(0x030) -#define APBC_PXA168_TIMERS APBC_REG(0x034) -#define APBC_PXA168_AIB APBC_REG(0x03c) -#define APBC_PXA168_SW_JTAG APBC_REG(0x040) -#define APBC_PXA168_ONEWIRE APBC_REG(0x048) -#define APBC_PXA168_ASFAR APBC_REG(0x050) -#define APBC_PXA168_ASSAR APBC_REG(0x054) -#define APBC_PXA168_TWSI1 APBC_REG(0x06c) -#define APBC_PXA168_UART3 APBC_REG(0x070) -#define APBC_PXA168_AC97 APBC_REG(0x084) -#define APBC_PXA168_SSP1 APBC_REG(0x81c) -#define APBC_PXA168_SSP2 APBC_REG(0x820) -#define APBC_PXA168_SSP3 APBC_REG(0x84c) -#define APBC_PXA168_SSP4 APBC_REG(0x858) -#define APBC_PXA168_SSP5 APBC_REG(0x85c) - -/* - * APB Clock register offsets for PXA910 - */ -#define APBC_PXA910_UART0 APBC_REG(0x000) -#define APBC_PXA910_UART1 APBC_REG(0x004) -#define APBC_PXA910_GPIO APBC_REG(0x008) -#define APBC_PXA910_PWM1 APBC_REG(0x00c) -#define APBC_PXA910_PWM2 APBC_REG(0x010) -#define APBC_PXA910_PWM3 APBC_REG(0x014) -#define APBC_PXA910_PWM4 APBC_REG(0x018) -#define APBC_PXA910_SSP1 APBC_REG(0x01c) -#define APBC_PXA910_SSP2 APBC_REG(0x020) -#define APBC_PXA910_IPC APBC_REG(0x024) -#define APBC_PXA910_RTC APBC_REG(0x028) -#define APBC_PXA910_TWSI0 APBC_REG(0x02c) -#define APBC_PXA910_KPC APBC_REG(0x030) -#define APBC_PXA910_TIMERS APBC_REG(0x034) -#define APBC_PXA910_TBROT APBC_REG(0x038) -#define APBC_PXA910_AIB APBC_REG(0x03c) -#define APBC_PXA910_SW_JTAG APBC_REG(0x040) -#define APBC_PXA910_TIMERS1 APBC_REG(0x044) -#define APBC_PXA910_ONEWIRE APBC_REG(0x048) -#define APBC_PXA910_SSP3 APBC_REG(0x04c) -#define APBC_PXA910_ASFAR APBC_REG(0x050) -#define APBC_PXA910_ASSAR APBC_REG(0x054) - -/* - * APB Clock register offsets for MMP2 - */ -#define APBC_MMP2_RTC APBC_REG(0x000) -#define APBC_MMP2_TWSI1 APBC_REG(0x004) -#define APBC_MMP2_TWSI2 APBC_REG(0x008) -#define APBC_MMP2_TWSI3 APBC_REG(0x00c) -#define APBC_MMP2_TWSI4 APBC_REG(0x010) -#define APBC_MMP2_ONEWIRE APBC_REG(0x014) -#define APBC_MMP2_KPC APBC_REG(0x018) -#define APBC_MMP2_TB_ROTARY APBC_REG(0x01c) -#define APBC_MMP2_SW_JTAG APBC_REG(0x020) -#define APBC_MMP2_TIMERS APBC_REG(0x024) -#define APBC_MMP2_UART1 APBC_REG(0x02c) -#define APBC_MMP2_UART2 APBC_REG(0x030) -#define APBC_MMP2_UART3 APBC_REG(0x034) -#define APBC_MMP2_GPIO APBC_REG(0x038) -#define APBC_MMP2_PWM0 APBC_REG(0x03c) -#define APBC_MMP2_PWM1 APBC_REG(0x040) -#define APBC_MMP2_PWM2 APBC_REG(0x044) -#define APBC_MMP2_PWM3 APBC_REG(0x048) -#define APBC_MMP2_SSP0 APBC_REG(0x04c) -#define APBC_MMP2_SSP1 APBC_REG(0x050) -#define APBC_MMP2_SSP2 APBC_REG(0x054) -#define APBC_MMP2_SSP3 APBC_REG(0x058) -#define APBC_MMP2_SSP4 APBC_REG(0x05c) -#define APBC_MMP2_SSP5 APBC_REG(0x060) -#define APBC_MMP2_AIB APBC_REG(0x064) -#define APBC_MMP2_ASFAR APBC_REG(0x068) -#define APBC_MMP2_ASSAR APBC_REG(0x06c) -#define APBC_MMP2_USIM APBC_REG(0x070) -#define APBC_MMP2_MPMU APBC_REG(0x074) -#define APBC_MMP2_IPC APBC_REG(0x078) -#define APBC_MMP2_TWSI5 APBC_REG(0x07c) -#define APBC_MMP2_TWSI6 APBC_REG(0x080) -#define APBC_MMP2_TWSI_INTSTS APBC_REG(0x084) -#define APBC_MMP2_UART4 APBC_REG(0x088) -#define APBC_MMP2_RIPC APBC_REG(0x08c) -#define APBC_MMP2_THSENS1 APBC_REG(0x090) /* Thermal Sensor */ -#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4) - /* Common APB clock register bit definitions */ #define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */ #define APBC_FNCLK (1 << 1) /* Functional Clock Enable */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h index 7af8deb63e83..93c8d0e29bb9 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h @@ -13,21 +13,6 @@ #include <mach/addr-map.h> -/* Clock Reset Control */ -#define APMU_IRE APMU_REG(0x048) -#define APMU_LCD APMU_REG(0x04c) -#define APMU_CCIC APMU_REG(0x050) -#define APMU_SDH0 APMU_REG(0x054) -#define APMU_SDH1 APMU_REG(0x058) -#define APMU_USB APMU_REG(0x05c) -#define APMU_NAND APMU_REG(0x060) -#define APMU_DMA APMU_REG(0x064) -#define APMU_GEU APMU_REG(0x068) -#define APMU_BUS APMU_REG(0x06c) -#define APMU_SDH2 APMU_REG(0x0e8) -#define APMU_SDH3 APMU_REG(0x0ec) -#define APMU_ETH APMU_REG(0x0fc) - #define APMU_FNCLK_EN (1 << 4) #define APMU_AXICLK_EN (1 << 3) #define APMU_FNRST_DIS (1 << 1) diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index c709a24a9d25..c2ce3d05b044 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -20,7 +20,6 @@ #include <asm/mach/time.h> #include <mach/addr-map.h> #include <mach/regs-apbc.h> -#include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> #include <mach/dma.h> @@ -29,7 +28,6 @@ #include <mach/mmp2.h> #include "common.h" -#include "clock.h" #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) @@ -98,67 +96,6 @@ void __init mmp2_init_irq(void) mmp2_init_icu(); } -static void sdhc_clk_enable(struct clk *clk) -{ - uint32_t clk_rst; - - clk_rst = __raw_readl(clk->clk_rst); - clk_rst |= clk->enable_val; - __raw_writel(clk_rst, clk->clk_rst); -} - -static void sdhc_clk_disable(struct clk *clk) -{ - uint32_t clk_rst; - - clk_rst = __raw_readl(clk->clk_rst); - clk_rst &= ~clk->enable_val; - __raw_writel(clk_rst, clk->clk_rst); -} - -struct clkops sdhc_clk_ops = { - .enable = sdhc_clk_enable, - .disable = sdhc_clk_disable, -}; - -/* APB peripheral clocks */ -static APBC_CLK(uart1, MMP2_UART1, 1, 26000000); -static APBC_CLK(uart2, MMP2_UART2, 1, 26000000); -static APBC_CLK(uart3, MMP2_UART3, 1, 26000000); -static APBC_CLK(uart4, MMP2_UART4, 1, 26000000); -static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000); -static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000); -static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); -static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); -static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); -static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); -static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000); - -static APMU_CLK(nand, NAND, 0xbf, 100000000); -static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops); -static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops); -static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops); -static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops); - -static struct clk_lookup mmp2_clkregs[] = { - INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL), - INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL), - INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL), - INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), - INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), - INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), -}; - static int __init mmp2_init(void) { if (cpu_is_mmp2()) { @@ -168,25 +105,27 @@ static int __init mmp2_init(void) mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); - clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); + mmp2_clk_init(); } return 0; } postcore_initcall(mmp2_init); +#define APBC_TIMERS APBC_REG(0x024) + static void __init mmp2_timer_init(void) { unsigned long clk_rst; - __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS); + __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); /* * enable bus/functional clock, enable 6.5MHz (divider 4), * release reset */ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); - __raw_writel(clk_rst, APBC_MMP2_TIMERS); + __raw_writel(clk_rst, APBC_TIMERS); timer_init(IRQ_MMP2_TIMER1); } diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 62d787c34475..b7f074f15498 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -18,8 +18,8 @@ #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/addr-map.h> #include <mach/cputype.h> +#include <mach/addr-map.h> #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> @@ -50,62 +50,13 @@ void __init pxa168_init_irq(void) icu_init_irq(); } -/* APB peripheral clocks */ -static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); -static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); -static APBC_CLK(uart3, PXA168_UART3, 1, 14745600); -static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); -static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); -static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); -static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); -static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); -static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); -static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); -static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); -static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); -static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); -static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); -static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); -static APBC_CLK(keypad, PXA168_KPC, 0, 32000); -static APBC_CLK(rtc, PXA168_RTC, 8, 32768); - -static APMU_CLK(nand, NAND, 0x19b, 156000000); -static APMU_CLK(lcd, LCD, 0x7f, 312000000); -static APMU_CLK(eth, ETH, 0x09, 0); -static APMU_CLK(usb, USB, 0x12, 0); - -/* device and clock bindings */ -static struct clk_lookup pxa168_clkregs[] = { - INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), - INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), - INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), - INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), - INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), - INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), - INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), - INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), - INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), - INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), - INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), - INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), -}; - static int __init pxa168_init(void) { if (cpu_is_pxa168()) { mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa168_mfp_addr_map); pxa_init_dma(IRQ_PXA168_DMA_INT0, 32); - clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs)); + pxa168_clk_init(); } return 0; @@ -114,6 +65,7 @@ postcore_initcall(pxa168_init); /* system timer - clock enabled, 3.25MHz */ #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) +#define APBC_TIMERS APBC_REG(0x34) static void __init pxa168_timer_init(void) { @@ -121,10 +73,10 @@ static void __init pxa168_timer_init(void) * ourselves instead of using clk_* API. Clock rate is defined * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running */ - __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS); + __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); /* 3.25MHz, bus/functional clock enabled, release reset */ - __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS); + __raw_writel(TIMER_CLK_RST, APBC_TIMERS); timer_init(IRQ_PXA168_TIMER1); } diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 6da52e9f2bdc..7d84521bb715 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -17,7 +17,6 @@ #include <asm/mach/time.h> #include <mach/addr-map.h> #include <mach/regs-apbc.h> -#include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> #include <mach/dma.h> @@ -25,7 +24,6 @@ #include <mach/devices.h> #include "common.h" -#include "clock.h" #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) @@ -82,44 +80,13 @@ void __init pxa910_init_irq(void) icu_init_irq(); } -/* APB peripheral clocks */ -static APBC_CLK(uart1, PXA910_UART0, 1, 14745600); -static APBC_CLK(uart2, PXA910_UART1, 1, 14745600); -static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); -static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); -static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000); -static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); -static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); -static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); -static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000); -static APBC_CLK(rtc, PXA910_RTC, 8, 32768); - -static APMU_CLK(nand, NAND, 0x19b, 156000000); -static APMU_CLK(u2o, USB, 0x1b, 480000000); - -/* device and clock bindings */ -static struct clk_lookup pxa910_clkregs[] = { - INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL), - INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL), - INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), - INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), - INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), - INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), -}; - static int __init pxa910_init(void) { if (cpu_is_pxa910()) { mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa910_mfp_addr_map); pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); - clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs)); + pxa910_clk_init(); } return 0; @@ -128,12 +95,13 @@ postcore_initcall(pxa910_init); /* system timer - clock enabled, 3.25MHz */ #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) +#define APBC_TIMERS APBC_REG(0x34) static void __init pxa910_timer_init(void) { /* reset and configure */ - __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS); - __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS); + __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); + __raw_writel(TIMER_CLK_RST, APBC_TIMERS); timer_init(IRQ_PXA910_AP1_TIMER1); } diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4ad3969b9881..6a6c197212eb 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,11 +1,11 @@ -obj-y += io.o idle.o timer.o +obj-y += io.o timer.o obj-y += clock.o obj-$(CONFIG_DEBUG_FS) += clock-debug.o obj-$(CONFIG_MSM_VIC) += irq-vic.o obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c deleted file mode 100644 index 805d4ee53f7e..000000000000 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ /dev/null @@ -1,525 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.c - * - * MSM architecture clock driver - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat <san@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include "proc_comm.h" -#include "acpuclock.h" - - -#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) -#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) -#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) - -/* - * ARM11 clock configuration for specific ACPU speeds - */ - -#define ACPU_PLL_TCXO -1 -#define ACPU_PLL_0 0 -#define ACPU_PLL_1 1 -#define ACPU_PLL_2 2 -#define ACPU_PLL_3 3 - -#define PERF_SWITCH_DEBUG 0 -#define PERF_SWITCH_STEP_DEBUG 0 - -struct clock_state -{ - struct clkctl_acpu_speed *current_speed; - struct mutex lock; - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - -static struct clk *ebi1_clk; -static struct clock_state drv_state = { 0 }; - -static void __init acpuclk_init(void); - -/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */ -enum { - VDD_0 = 0, - VDD_1 = 1, - VDD_2 = 2, - VDD_3 = 3, - VDD_4 = 3, - VDD_5 = 3, - VDD_6 = 3, - VDD_7 = 7, - VDD_END -}; - -struct clkctl_acpu_speed { - unsigned int a11clk_khz; - int pll; - unsigned int a11clk_src_sel; - unsigned int a11clk_src_div; - unsigned int ahbclk_khz; - unsigned int ahbclk_div; - int vdd; - unsigned int axiclk_khz; - unsigned long lpj; /* loops_per_jiffy */ -/* Index in acpu_freq_tbl[] for steppings. */ - short down; - short up; -}; - -/* - * ACPU speed table. Complete table is shown but certain speeds are commented - * out to optimized speed switching. Initialize loops_per_jiffy to 0. - * - * Table stepping up/down is optimized for 256mhz jumps while staying on the - * same PLL. - */ -#if (0) -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 }, - { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 }, - { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 }, - { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 }, - { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 }, - { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 }, - { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#else /* Table of freq we currently use. */ -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#endif - - -#ifdef CONFIG_CPU_FREQ_TABLE -static struct cpufreq_frequency_table freq_table[] = { - { 0, 122880 }, - { 1, 128000 }, - { 2, 245760 }, - { 3, 384000 }, - { 4, 528000 }, - { 5, CPUFREQ_TABLE_END }, -}; -#endif - -static int pc_pll_request(unsigned id, unsigned on) -{ - int res; - on = !!on; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "Enabling PLL %d\n", id); - else - printk(KERN_DEBUG "Disabling PLL %d\n", id); -#endif - - res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); - if (res < 0) - return res; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "PLL %d enabled\n", id); - else - printk(KERN_DEBUG "PLL %d disabled\n", id); -#endif - return res; -} - - -/*---------------------------------------------------------------------------- - * ARM11 'owned' clock control - *---------------------------------------------------------------------------*/ - -unsigned long acpuclk_power_collapse(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.power_collapse_khz) - acpuclk_set_rate(drv_state.power_collapse_khz, 1); - return ret; -} - -unsigned long acpuclk_get_wfi_rate(void) -{ - return drv_state.wait_for_irq_khz; -} - -unsigned long acpuclk_wait_for_irq(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.wait_for_irq_khz) - acpuclk_set_rate(drv_state.wait_for_irq_khz, 1); - return ret; -} - -static int acpuclk_set_vdd_level(int vdd) -{ - uint32_t current_vdd; - - current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07; - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n", - current_vdd, vdd); -#endif - writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR); - udelay(drv_state.vdd_switch_time_us); - if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) { -#if PERF_SWITCH_DEBUG - printk(KERN_ERR "acpuclock: VDD set failed\n"); -#endif - return -EIO; - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: VDD switched\n"); -#endif - return 0; -} - -/* Set proper dividers for the given clock speed. */ -static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) { - uint32_t reg_clkctl, reg_clksel, clk_div; - - /* AHB_CLK_DIV */ - clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03; - /* - * If the new clock divider is higher than the previous, then - * program the divider before switching the clock - */ - if (hunt_s->ahbclk_div > clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) { - /* SRC0 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 4); - reg_clkctl |= (hunt_s->a11clk_src_sel << 4); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~0xf; - reg_clkctl |= hunt_s->a11clk_src_div; - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } else { - /* SRC1 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 12); - reg_clkctl |= (hunt_s->a11clk_src_sel << 12); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0xf << 8); - reg_clkctl |= (hunt_s->a11clk_src_div << 8); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - - /* - * If the new clock divider is lower than the previous, then - * program the divider after switching the clock - */ - if (hunt_s->ahbclk_div < clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } -} - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse) -{ - uint32_t reg_clkctl; - struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s; - int rc = 0; - unsigned int plls_enabled = 0, pll; - - strt_s = cur_s = drv_state.current_speed; - - WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n"); - if (cur_s == NULL) - return -ENOENT; - - if (rate == (cur_s->a11clk_khz * 1000)) - return 0; - - for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) { - if (tgt_s->a11clk_khz == (rate / 1000)) - break; - } - - if (tgt_s->a11clk_khz == 0) - return -EINVAL; - - /* Choose the highest speed speed at or below 'rate' with same PLL. */ - if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) { - while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll) - tgt_s--; - } - - if (strt_s->pll != ACPU_PLL_TCXO) - plls_enabled |= 1 << strt_s->pll; - - if (!for_power_collapse) { - mutex_lock(&drv_state.lock); - if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) { - rc = pc_pll_request(tgt_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - tgt_s->pll, rc); - goto out; - } - plls_enabled |= 1 << tgt_s->pll; - } - /* Increase VDD if needed. */ - if (tgt_s->vdd > cur_s->vdd) { - if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) { - printk(KERN_ERR "Unable to switch ACPU vdd\n"); - goto out; - } - } - } - - /* Set wait states for CPU between frequency changes */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - -#if PERF_SWITCH_DEBUG - printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n", - strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000); -#endif - - while (cur_s != tgt_s) { - /* - * Always jump to target freq if within 256mhz, regulardless of - * PLL. If differnece is greater, use the predefinied - * steppings in the table. - */ - int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz)); - if (d > drv_state.max_speed_delta_khz) { - /* Step up or down depending on target vs current. */ - int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ? - cur_s->up : cur_s->down; - if (clk_index < 0) { /* This should not happen. */ - printk(KERN_ERR "cur:%u target: %u\n", - cur_s->a11clk_khz, tgt_s->a11clk_khz); - rc = -EINVAL; - goto out; - } - cur_s = &acpu_freq_tbl[clk_index]; - } else { - cur_s = tgt_s; - } -#if PERF_SWITCH_STEP_DEBUG - printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n", - __FUNCTION__, cur_s->a11clk_khz, cur_s->pll); -#endif - if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO - && !(plls_enabled & (1 << cur_s->pll))) { - rc = pc_pll_request(cur_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - cur_s->pll, rc); - goto out; - } - plls_enabled |= 1 << cur_s->pll; - } - - acpuclk_set_div(cur_s); - drv_state.current_speed = cur_s; - /* Re-adjust lpj for the new clock speed. */ - loops_per_jiffy = cur_s->lpj; - udelay(drv_state.acpu_switch_time_us); - } - - /* Nothing else to do for power collapse. */ - if (for_power_collapse) - return 0; - - /* Disable PLLs we are not using anymore. */ - plls_enabled &= ~(1 << tgt_s->pll); - for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++) - if (plls_enabled & (1 << pll)) { - rc = pc_pll_request(pll, 0); - if (rc < 0) { - pr_err("PLL%d disable failed (%d)\n", pll, rc); - goto out; - } - } - - /* Change the AXI bus frequency if we can. */ - if (strt_s->axiclk_khz != tgt_s->axiclk_khz) { - rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - } - - /* Drop VDD level if we can. */ - if (tgt_s->vdd < strt_s->vdd) { - if (acpuclk_set_vdd_level(tgt_s->vdd) < 0) - printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n"); - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__); -#endif -out: - if (!for_power_collapse) - mutex_unlock(&drv_state.lock); - return rc; -} - -static void __init acpuclk_init(void) -{ - struct clkctl_acpu_speed *speed; - uint32_t div, sel; - int rc; - - /* - * Determine the rate of ACPU clock - */ - - if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */ - /* CLK_SRC0_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7; - /* CLK_SRC0_DIV */ - div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f; - } else { - /* CLK_SRC1_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07; - /* CLK_SRC1_DIV */ - div = readl(A11S_CLK_CNTL_ADDR) & 0x0f; - } - - for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) { - if (speed->a11clk_src_sel == sel - && (speed->a11clk_src_div == div)) - break; - } - if (speed->a11clk_khz == 0) { - printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n"); - return; - } - - drv_state.current_speed = speed; - - rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - - printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz); -} - -unsigned long acpuclk_get_rate(void) -{ - WARN_ONCE(drv_state.current_speed == NULL, - "acpuclk_get_rate: not initialized\n"); - if (drv_state.current_speed) - return drv_state.current_speed->a11clk_khz; - else - return 0; -} - -uint32_t acpuclk_get_switch_time(void) -{ - return drv_state.acpu_switch_time_us; -} - -/*---------------------------------------------------------------------------- - * Clock driver initialization - *---------------------------------------------------------------------------*/ - -/* Initialize the lpj field in the acpu_freq_tbl. */ -static void __init lpj_init(void) -{ - int i; - const struct clkctl_acpu_speed *base_clk = drv_state.current_speed; - for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) { - acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy, - base_clk->a11clk_khz, - acpu_freq_tbl[i].a11clk_khz); - } -} - -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata) -{ - pr_info("acpu_clock_init()\n"); - - ebi1_clk = clk_get(NULL, "ebi1_clk"); - - mutex_init(&drv_state.lock); - drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us; - drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz; - drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us; - drv_state.power_collapse_khz = clkdata->power_collapse_khz; - drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz; - acpuclk_init(); - lpj_init(); -#ifdef CONFIG_CPU_FREQ_TABLE - cpufreq_frequency_table_get_attr(freq_table, smp_processor_id()); -#endif -} diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h deleted file mode 100644 index 415de2eb9a5e..000000000000 --- a/arch/arm/mach-msm/acpuclock.h +++ /dev/null @@ -1,32 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.h - * - * MSM architecture clock driver header - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat <san@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H -#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse); -unsigned long acpuclk_get_rate(void); -uint32_t acpuclk_get_switch_time(void); -unsigned long acpuclk_wait_for_irq(void); -unsigned long acpuclk_power_collapse(void); -unsigned long acpuclk_get_wfi_rate(void); - - -#endif - diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index cf1f89a5dc62..df00bc03ce74 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -30,7 +30,6 @@ #include <mach/board.h> #include <mach/hardware.h> -#include <mach/system.h> #include "board-mahimahi.h" #include "devices.h" diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c deleted file mode 100644 index 451ab1d43c92..000000000000 --- a/arch/arm/mach-msm/board-msm7x27.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/power_supply.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/setup.h> -#ifdef CONFIG_CACHE_L2X0 -#include <asm/hardware/cache-l2x0.h> -#endif - -#include <mach/vreg.h> -#include <mach/mpp.h> -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "devices.h" -#include "socinfo.h" -#include "clock.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x9C004300, - .end = 0x9C0043ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(132), - .end = MSM_GPIO_TO_INT(132), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, - &msm_device_smd, - &msm_device_dmov, - &msm_device_nand, - &smc91x_device, -}; - -extern struct sys_timer msm_timer; - -static void __init msm7x2x_init_irq(void) -{ - msm_init_irq(); -} - -static void __init msm7x2x_init(void) -{ - if (socinfo_init() < 0) - BUG(); - - if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) { - smc91x_resources[0].start = 0x98000300; - smc91x_resources[0].end = 0x980003ff; - smc91x_resources[1].start = MSM_GPIO_TO_INT(85); - smc91x_resources[1].end = MSM_GPIO_TO_INT(85); - if (gpio_tlmm_config(GPIO_CFG(85, 0, - GPIO_INPUT, - GPIO_PULL_DOWN, - GPIO_2MA), - GPIO_ENABLE)) { - printk(KERN_ERR - "%s: Err: Config GPIO-85 INT\n", - __func__); - } - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init msm7x2x_map_io(void) -{ - msm_map_common_io(); - /* Technically dependent on the SoC but using machine_is - * macros since socinfo is not available this early and there - * are plans to restructure the code which will eliminate the - * need for socinfo. - */ - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) - msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27); - - if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa()) - msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25); - -#ifdef CONFIG_CACHE_L2X0 - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) { - /* 7x27 has 256KB L2 cache: - 64Kb/Way and 4-Way Associativity; - R/W latency: 3 cycles; - evmon/parity/share disabled. */ - l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000); - } -#endif -} - -static void __init msm7x2x_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 2e569ab10eef..b7b0fc7e3278 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/system.h> #include <mach/vreg.h> #include <mach/board.h> diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index 63b711311086..a52c970df157 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -25,7 +25,7 @@ /* * glue for the proc_comm interface */ -int pc_clk_enable(unsigned id) +static int pc_clk_enable(unsigned id) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); if (rc < 0) @@ -34,7 +34,7 @@ int pc_clk_enable(unsigned id) return (int)id < 0 ? -EINVAL : 0; } -void pc_clk_disable(unsigned id) +static void pc_clk_disable(unsigned id) { msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); } @@ -54,7 +54,7 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_rate(unsigned id, unsigned rate) +static int pc_clk_set_rate(unsigned id, unsigned rate) { /* The rate _might_ be rounded off to the nearest KHz value by the * remote function. So a return value of 0 doesn't necessarily mean @@ -67,7 +67,7 @@ int pc_clk_set_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_min_rate(unsigned id, unsigned rate) +static int pc_clk_set_min_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); if (rc < 0) @@ -76,7 +76,7 @@ int pc_clk_set_min_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_max_rate(unsigned id, unsigned rate) +static int pc_clk_set_max_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate); if (rc < 0) @@ -85,7 +85,7 @@ int pc_clk_set_max_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_flags(unsigned id, unsigned flags) +static int pc_clk_set_flags(unsigned id, unsigned flags) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags); if (rc < 0) @@ -94,7 +94,7 @@ int pc_clk_set_flags(unsigned id, unsigned flags) return (int)id < 0 ? -EINVAL : 0; } -unsigned pc_clk_get_rate(unsigned id) +static unsigned pc_clk_get_rate(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) return 0; @@ -102,7 +102,7 @@ unsigned pc_clk_get_rate(unsigned id) return id; } -unsigned pc_clk_is_enabled(unsigned id) +static unsigned pc_clk_is_enabled(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) return 0; @@ -110,7 +110,7 @@ unsigned pc_clk_is_enabled(unsigned id) return id; } -long pc_clk_round_rate(unsigned id, unsigned rate) +static long pc_clk_round_rate(unsigned id, unsigned rate) { /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 02cae5e2951c..354b91d4c3ac 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -223,8 +223,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); - list_del(&cmd->list); - list_add_tail(&cmd->list, &active_commands[id]); + list_move_tail(&cmd->list, &active_commands[id]); if (cmd->execute_func) cmd->execute_func(cmd); PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c deleted file mode 100644 index 0c9e13c65743..000000000000 --- a/arch/arm/mach-msm/idle.c +++ /dev/null @@ -1,49 +0,0 @@ -/* arch/arm/mach-msm/idle.c - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <asm/system.h> - -static void msm_idle(void) -{ -#ifdef CONFIG_MSM7X00A_IDLE - asm volatile ( - - "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" - "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" - "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" - "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" - - "mov r0, #0 /* prepare wfi value */ \n\t" - "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" - "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" - "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" - - "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" - - : : : "r0","r1" ); -#endif -} - -static int __init msm_idle_init(void) -{ - arm_pm_idle = msm_idle; - return 0; -} - -arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 435f8edfafd1..5a0811a4c851 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -22,15 +22,6 @@ /* platform device data structures */ -struct msm_acpu_clock_platform_data -{ - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - struct clk_lookup; extern struct sys_timer msm_timer; @@ -42,7 +33,6 @@ void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); int __init msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, unsigned int stat_irq, unsigned long stat_irq_flags); diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h deleted file mode 100644 index f5fb2ec87ffe..000000000000 --- a/arch/arm/mach-msm/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-msm/include/mach/system.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -/* low level hardware reset hook -- for example, hitting the - * PSHOLD line on the PMIC to hard reset the system - */ -extern void (*msm_hw_reset_hook)(void); diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b1168850..97042331cfc7 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -38,8 +38,7 @@ #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \ - || defined(CONFIG_ARCH_MSM7X25) +#if defined(CONFIG_ARCH_MSM7X00A) static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X00), diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 9980dc736e7b..8f1eecd88186 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include <linux/spinlock.h> #include <mach/msm_iomap.h> -#include <mach/system.h> #include "proc_comm.h" diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c index 657be73297db..84183ed2ef79 100644 --- a/arch/arm/mach-msm/smd.c +++ b/arch/arm/mach-msm/smd.c @@ -30,7 +30,6 @@ #include <linux/delay.h> #include <mach/msm_smd.h> -#include <mach/system.h> #include "smd_private.h" #include "proc_comm.h" @@ -39,8 +38,6 @@ #define CONFIG_QDSP6 1 #endif -void (*msm_hw_reset_hook)(void); - #define MODULE_NAME "msm_smd" enum { @@ -101,10 +98,6 @@ static void handle_modem_crash(void) pr_err("ARM9 has CRASHED\n"); smd_diag(); - /* hard reboot if possible */ - if (msm_hw_reset_hook) - msm_hw_reset_hook(); - /* in this case the modem or watchdog should reboot us */ for (;;) ; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 812808254936..004f93515a4e 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -101,7 +101,7 @@ static struct clock_event_device msm_clockevent = { static union { struct clock_event_device *evt; - struct clock_event_device __percpu **percpu_evt; + struct clock_event_device * __percpu *percpu_evt; } msm_evt; static void __iomem *source_base; diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index a9bc84180d21..137e479d15a0 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -13,6 +13,7 @@ #include <linux/mbus.h> #include <linux/io.h> #include <plat/addr-map.h> +#include <mach/mv78xx0.h> #include "common.h" /* @@ -81,7 +82,7 @@ void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, int maj, int min) { orion_setup_cpu_win(&addr_map_cfg, window, base, size, - TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1); + TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0); } void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 3057f7d4329a..6b0c38735527 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -135,11 +135,6 @@ static struct map_desc mv78xx0_io_desc[] __initdata = { .length = MV78XX0_CORE_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0), - .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)), - .length = MV78XX0_PCIE_IO_SIZE * 8, - .type = MT_DEVICE, - }, { .virtual = MV78XX0_REGS_VIRT_BASE, .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), .length = MV78XX0_REGS_SIZE, diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h deleted file mode 100644 index c7d9d00d8fc1..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "mv78xx0.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0)) - + MV78XX0_PCIE_IO_VIRT_BASE(0)); -} - -#define __io(a) __io(a) - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index e807c4c52a0b..bd03fed1128e 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -29,15 +29,15 @@ * * virt phys size * fe400000 f102x000 16K core-specific peripheral registers - * fe700000 f0800000 1M PCIe #0 I/O space - * fe800000 f0900000 1M PCIe #1 I/O space - * fe900000 f0a00000 1M PCIe #2 I/O space - * fea00000 f0b00000 1M PCIe #3 I/O space - * feb00000 f0c00000 1M PCIe #4 I/O space - * fec00000 f0d00000 1M PCIe #5 I/O space - * fed00000 f0e00000 1M PCIe #6 I/O space - * fee00000 f0f00000 1M PCIe #7 I/O space - * fef00000 f1000000 1M on-chip peripheral registers + * fee00000 f0800000 64K PCIe #0 I/O space + * fee10000 f0900000 64K PCIe #1 I/O space + * fee20000 f0a00000 64K PCIe #2 I/O space + * fee30000 f0b00000 64K PCIe #3 I/O space + * fee40000 f0c00000 64K PCIe #4 I/O space + * fee50000 f0d00000 64K PCIe #5 I/O space + * fee60000 f0e00000 64K PCIe #6 I/O space + * fee70000 f0f00000 64K PCIe #7 I/O space + * fd000000 f1000000 1M on-chip peripheral registers */ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 @@ -46,11 +46,10 @@ #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) #define MV78XX0_PCIE_IO_SIZE SZ_1M #define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE 0xfef00000 +#define MV78XX0_REGS_VIRT_BASE 0xfd000000 #define MV78XX0_REGS_SIZE SZ_1M #define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index 2e56e86b6d68..26a059b4f472 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -15,6 +15,7 @@ #include <asm/mach/pci.h> #include <plat/pcie.h> #include <plat/addr-map.h> +#include <mach/mv78xx0.h> #include "common.h" struct pcie_port { @@ -23,16 +24,13 @@ struct pcie_port { u8 root_bus_nr; void __iomem *base; spinlock_t conf_lock; - char io_space_name[16]; char mem_space_name[16]; - struct resource res[2]; + struct resource res; }; static struct pcie_port pcie_port[8]; static int num_pcie_ports; static struct resource pcie_io_space; -static struct resource pcie_mem_space; - void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) { @@ -40,102 +38,59 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE); } +u32 pcie_port_size[8] = { + 0, + 0x30000000, + 0x10000000, + 0x10000000, + 0x08000000, + 0x08000000, + 0x08000000, + 0x04000000, +}; + static void __init mv78xx0_pcie_preinit(void) { int i; u32 size_each; u32 start; - int win; + int win = 0; pcie_io_space.name = "PCIe I/O Space"; pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0); pcie_io_space.end = MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1; - pcie_io_space.flags = IORESOURCE_IO; + pcie_io_space.flags = IORESOURCE_MEM; if (request_resource(&iomem_resource, &pcie_io_space)) panic("can't allocate PCIe I/O space"); - pcie_mem_space.name = "PCIe MEM Space"; - pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE; - pcie_mem_space.end = - MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1; - pcie_mem_space.flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pcie_mem_space)) - panic("can't allocate PCIe MEM space"); + if (num_pcie_ports > 7) + panic("invalid number of PCIe ports"); + + size_each = pcie_port_size[num_pcie_ports]; + start = MV78XX0_PCIE_MEM_PHYS_BASE; for (i = 0; i < num_pcie_ports; i++) { struct pcie_port *pp = pcie_port + i; - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d.%d I/O", pp->maj, pp->min); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i); - pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1; - pp->res[0].flags = IORESOURCE_IO; - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d.%d MEM", pp->maj, pp->min); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; - pp->res[1].flags = IORESOURCE_MEM; - } - - switch (num_pcie_ports) { - case 0: - size_each = 0; - break; - - case 1: - size_each = 0x30000000; - break; - - case 2 ... 3: - size_each = 0x10000000; - break; - - case 4 ... 6: - size_each = 0x08000000; - break; - - case 7: - size_each = 0x04000000; - break; - - default: - panic("invalid number of PCIe ports"); - } - - start = MV78XX0_PCIE_MEM_PHYS_BASE; - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; - - pp->res[1].start = start; - pp->res[1].end = start + size_each - 1; + pp->res.name = pp->mem_space_name; + pp->res.flags = IORESOURCE_MEM; + pp->res.start = start; + pp->res.end = start + size_each - 1; start += size_each; - } - - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; - if (request_resource(&pcie_io_space, &pp->res[0])) - panic("can't allocate PCIe I/O sub-space"); - - if (request_resource(&pcie_mem_space, &pp->res[1])) + if (request_resource(&iomem_resource, &pp->res)) panic("can't allocate PCIe MEM sub-space"); - } - win = 0; - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; + mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start, + resource_size(&pp->res), + pp->maj, pp->min); - mv78xx0_setup_pcie_io_win(win++, pp->res[0].start, - resource_size(&pp->res[0]), + mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K, pp->maj, pp->min); - - mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start, - resource_size(&pp->res[1]), - pp->maj, pp->min); } } @@ -156,8 +111,9 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_set_local_bus_nr(pp->base, sys->busnr); orion_pcie_setup(pp->base); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr)); + + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); return 1; } @@ -281,7 +237,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base) pp->root_bus_nr = -1; pp->base = (void __iomem *)base; spin_lock_init(&pp->conf_lock); - memset(pp->res, 0, sizeof(pp->res)); + memset(&pp->res, 0, sizeof(pp->res)); } else { printk("link down, ignoring\n"); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c00c68961bb8..02b9478b786f 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -23,7 +23,6 @@ #include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/pmu.h> #include "iomap.h" #include <plat/board.h> @@ -448,7 +447,7 @@ static struct resource omap3_pmu_resource = { static struct platform_device omap_pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = 1, }; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 410291c67666..87a6cdabcad5 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -47,16 +47,6 @@ static struct map_desc orion5x_io_desc[] __initdata = { .length = ORION5X_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = ORION5X_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), - .length = ORION5X_PCIE_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ORION5X_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), - .length = ORION5X_PCI_IO_SIZE, - .type = MT_DEVICE, - }, { .virtual = ORION5X_PCIE_WA_VIRT_BASE, .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), .length = ORION5X_PCIE_WA_SIZE, diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h deleted file mode 100644 index 1aa5d0a50a0b..000000000000 --- a/arch/arm/mach-orion5x/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include <mach/orion5x.h> -#include <asm/sizes.h> - -#define IO_SPACE_LIMIT SZ_2M -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 683e085ce162..1b60131b7f60 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -31,31 +31,29 @@ * fc000000 device bus mappings (cs0/cs1) * * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) + * fe000000 f1000000 1M on-chip peripheral registers + * fee00000 f2000000 64K PCIe I/O space + * fee10000 f2100000 64K PCI I/O space + * fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) ****************************************************************************/ #define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_VIRT_BASE 0xfe000000 #define ORION5X_REGS_SIZE SZ_1M #define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 #define ORION5X_PCIE_IO_BUS_BASE 0x00000000 -#define ORION5X_PCIE_IO_SIZE SZ_1M +#define ORION5X_PCIE_IO_SIZE SZ_64K #define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION5X_PCI_IO_BUS_BASE 0x00100000 -#define ORION5X_PCI_IO_SIZE SZ_1M +#define ORION5X_PCI_IO_BUS_BASE 0x00010000 +#define ORION5X_PCI_IO_SIZE SZ_64K #define ORION5X_SRAM_PHYS_BASE (0xf2200000) #define ORION5X_SRAM_SIZE SZ_8K /* Relevant only for Orion-1/Orion-NAS */ #define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000 #define ORION5X_PCIE_WA_SIZE SZ_16M #define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index cb19e1661bb3..6921d49b988d 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -162,35 +162,25 @@ static int __init pcie_setup(struct pci_sys_data *sys) pcie_ops.read = pcie_rd_conf_wa; } + pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE); + /* * Request resources. */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("pcie_setup unable to alloc resources"); /* - * IORESOURCE_IO - */ - sys->io_offset = 0; - res[0].name = "PCIe I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION5X_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - - /* * IORESOURCE_MEM */ - res[1].name = "PCIe Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION5X_PCIE_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) + res->name = "PCIe Memory Space"; + res->flags = IORESOURCE_MEM; + res->start = ORION5X_PCIE_MEM_PHYS_BASE; + res->end = res->start + ORION5X_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, res)) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } @@ -489,35 +479,25 @@ static int __init pci_setup(struct pci_sys_data *sys) */ orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE); + /* * Request resources */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("pci_setup unable to alloc resources"); /* - * IORESOURCE_IO - */ - sys->io_offset = 0; - res[0].name = "PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION5X_PCI_IO_BUS_BASE; - res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCI IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - - /* * IORESOURCE_MEM */ - res[1].name = "PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION5X_PCI_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) + res->name = "PCI Memory Space"; + res->flags = IORESOURCE_MEM; + res->start = ORION5X_PCI_MEM_PHYS_BASE; + res->end = res->start + ORION5X_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, res)) panic("Request PCI Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); return 1; } diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile deleted file mode 100644 index 777564c90a12..000000000000 --- a/arch/arm/mach-pnx4008/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o -obj-m := -obj-n := -obj- := - -# Power Management -obj-$(CONFIG_PM) += pm.o sleep.o - diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot deleted file mode 100644 index 9fa19baa7f2e..000000000000 --- a/arch/arm/mach-pnx4008/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 - diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c deleted file mode 100644 index a4a3819c96cb..000000000000 --- a/arch/arm/mach-pnx4008/clock.c +++ /dev/null @@ -1,1001 +0,0 @@ -/* - * arch/arm/mach-pnx4008/clock.c - * - * Clock control driver for PNX4008 - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * Generic clock management functions are partially based on: - * linux/arch/arm/mach-omap/clock.c - * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/clock.h> -#include "clock.h" - -/*forward declaration*/ -static struct clk per_ck; -static struct clk hclk_ck; -static struct clk ck_1MHz; -static struct clk ck_13MHz; -static struct clk ck_pll1; -static int local_set_rate(struct clk *clk, u32 rate); - -static inline void clock_lock(void) -{ - local_irq_disable(); -} - -static inline void clock_unlock(void) -{ - local_irq_enable(); -} - -static void propagate_rate(struct clk *clk) -{ - struct clk *tmp_clk; - - tmp_clk = clk; - while (tmp_clk->propagate_next) { - tmp_clk = tmp_clk->propagate_next; - local_set_rate(tmp_clk, tmp_clk->user_rate); - } -} - -static void clk_reg_disable(struct clk *clk) -{ - if (clk->enable_reg) - __raw_writel(__raw_readl(clk->enable_reg) & - ~(1 << clk->enable_shift), clk->enable_reg); -} - -static int clk_reg_enable(struct clk *clk) -{ - if (clk->enable_reg) - __raw_writel(__raw_readl(clk->enable_reg) | - (1 << clk->enable_shift), clk->enable_reg); - return 0; -} - -static inline void clk_reg_disable1(struct clk *clk) -{ - if (clk->enable_reg1) - __raw_writel(__raw_readl(clk->enable_reg1) & - ~(1 << clk->enable_shift1), clk->enable_reg1); -} - -static inline void clk_reg_enable1(struct clk *clk) -{ - if (clk->enable_reg1) - __raw_writel(__raw_readl(clk->enable_reg1) | - (1 << clk->enable_shift1), clk->enable_reg1); -} - -static int clk_wait_for_pll_lock(struct clk *clk) -{ - int i; - i = 0; - while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */ - - if (!(__raw_readl(clk->scale_reg) & 1)) { - printk(KERN_ERR - "%s ERROR: failed to lock, scale reg data: %x\n", - clk->name, __raw_readl(clk->scale_reg)); - return -1; - } - return 0; -} - -static int switch_to_dirty_13mhz(struct clk *clk) -{ - int i; - int ret; - u32 tmp_reg; - - ret = 0; - - if (!clk->rate) - clk_reg_enable1(clk); - - tmp_reg = __raw_readl(clk->parent_switch_reg); - /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */ - if (!(tmp_reg & 1)) { - tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */ - __raw_writel(tmp_reg, clk->parent_switch_reg); - i = 0; - while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */ - - if (!(__raw_readl(clk->parent_switch_reg) & 1)) { - printk(KERN_ERR - "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n", - clk->name, __raw_readl(clk->parent_switch_reg)); - ret = -1; - } - } - - if (!clk->rate) - clk_reg_disable1(clk); - - return ret; -} - -static int switch_to_clean_13mhz(struct clk *clk) -{ - int i; - int ret; - u32 tmp_reg; - - ret = 0; - - if (!clk->rate) - clk_reg_enable1(clk); - - tmp_reg = __raw_readl(clk->parent_switch_reg); - /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */ - if (tmp_reg & 1) { - tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */ - __raw_writel(tmp_reg, clk->parent_switch_reg); - i = 0; - while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */ - - if (__raw_readl(clk->parent_switch_reg) & 1) { - printk(KERN_ERR - "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n", - clk->name, __raw_readl(clk->parent_switch_reg)); - ret = -1; - } - } - - if (!clk->rate) - clk_reg_disable1(clk); - - return ret; -} - -static int set_13MHz_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - - if (parent == &ck_13MHz) - ret = switch_to_clean_13mhz(clk); - else if (parent == &ck_pll1) - ret = switch_to_dirty_13mhz(clk); - - return ret; -} - -#define PLL160_MIN_FCCO 156000 -#define PLL160_MAX_FCCO 320000 - -/* - * Calculate pll160 settings. - * Possible input: up to 320MHz with step of clk->parent->rate. - * In PNX4008 parent rate for pll160s may be either 1 or 13MHz. - * Ignored paths: "feedback" (bit 13 set), "div-by-N". - * Setting ARM PLL4 rate to 0 will put CPU into direct run mode. - * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input. - * Please refer to PNX4008 IC manual for details. - */ - -static int pll160_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp_reg, tmp_m, tmp_2p, i; - u32 parent_rate; - int ret = -EINVAL; - - parent_rate = clk->parent->rate; - - if (!parent_rate) - goto out; - - /* set direct run for ARM or disable output for others */ - clk_reg_disable(clk); - - /* disable source input as well (ignored for ARM) */ - clk_reg_disable1(clk); - - tmp_reg = __raw_readl(clk->scale_reg); - tmp_reg &= ~0x1ffff; /*clear all settings, power down */ - __raw_writel(tmp_reg, clk->scale_reg); - - rate -= rate % parent_rate; /*round down the input */ - - if (rate > PLL160_MAX_FCCO) - rate = PLL160_MAX_FCCO; - - if (!rate) { - clk->rate = 0; - ret = 0; - goto out; - } - - clk_reg_enable1(clk); - tmp_reg = __raw_readl(clk->scale_reg); - - if (rate == parent_rate) { - /*enter direct bypass mode */ - tmp_reg |= ((1 << 14) | (1 << 15)); - __raw_writel(tmp_reg, clk->scale_reg); - clk->rate = parent_rate; - clk_reg_enable(clk); - ret = 0; - goto out; - } - - i = 0; - for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) { - if (rate * tmp_2p >= PLL160_MIN_FCCO) - break; - i++; - } - - if (tmp_2p > 1) - tmp_reg |= ((i - 1) << 11); - else - tmp_reg |= (1 << 14); /*direct mode, no divide */ - - tmp_m = rate * tmp_2p; - tmp_m /= parent_rate; - - tmp_reg |= (tmp_m - 1) << 1; /*calculate M */ - tmp_reg |= (1 << 16); /*power up PLL */ - __raw_writel(tmp_reg, clk->scale_reg); - - if (clk_wait_for_pll_lock(clk) < 0) { - clk_reg_disable(clk); - clk_reg_disable1(clk); - - tmp_reg = __raw_readl(clk->scale_reg); - tmp_reg &= ~0x1ffff; /*clear all settings, power down */ - __raw_writel(tmp_reg, clk->scale_reg); - clk->rate = 0; - ret = -EFAULT; - goto out; - } - - clk->rate = (tmp_m * parent_rate) / tmp_2p; - - if (clk->flags & RATE_PROPAGATES) - propagate_rate(clk); - - clk_reg_enable(clk); - ret = 0; - -out: - return ret; -} - -/*configure PER_CLK*/ -static int per_clk_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp; - - tmp = __raw_readl(clk->scale_reg); - tmp &= ~(0x1f << 2); - tmp |= ((clk->parent->rate / clk->rate) - 1) << 2; - __raw_writel(tmp, clk->scale_reg); - clk->rate = rate; - return 0; -} - -/*configure HCLK*/ -static int hclk_set_rate(struct clk *clk, u32 rate) -{ - u32 tmp; - tmp = __raw_readl(clk->scale_reg); - tmp = tmp & ~0x3; - switch (rate) { - case 1: - break; - case 2: - tmp |= 1; - break; - case 4: - tmp |= 2; - break; - } - - __raw_writel(tmp, clk->scale_reg); - clk->rate = rate; - return 0; -} - -static u32 hclk_round_rate(struct clk *clk, u32 rate) -{ - switch (rate) { - case 1: - case 4: - return rate; - } - return 2; -} - -static u32 per_clk_round_rate(struct clk *clk, u32 rate) -{ - return CLK_RATE_13MHZ; -} - -static int on_off_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_enable(clk); - clk->rate = 1; - } else { - clk_reg_disable(clk); - clk->rate = 0; - } - return 0; -} - -static int on_off_inv_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - clk->rate = 1; - } else { - clk_reg_enable(clk); - clk->rate = 0; - } - return 0; -} - -static u32 on_off_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? 1 : 0); -} - -static u32 pll4_round_rate(struct clk *clk, u32 rate) -{ - if (rate > CLK_RATE_208MHZ) - rate = CLK_RATE_208MHZ; - if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1) - rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ; - return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ))); -} - -static u32 pll3_round_rate(struct clk *clk, u32 rate) -{ - if (rate > CLK_RATE_208MHZ) - rate = CLK_RATE_208MHZ; - return (rate - rate % CLK_RATE_13MHZ); -} - -static u32 pll5_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? CLK_RATE_48MHZ : 0); -} - -static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate) -{ - return (rate ? CLK_RATE_13MHZ : 0); -} - -static int ck_13MHz_set_rate(struct clk *clk, u32 rate) -{ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - udelay(500); - clk->rate = CLK_RATE_13MHZ; - ck_1MHz.rate = CLK_RATE_1MHZ; - } else { - clk_reg_enable(clk); - clk->rate = 0; - ck_1MHz.rate = 0; - } - return 0; -} - -static int pll1_set_rate(struct clk *clk, u32 rate) -{ -#if 0 /* doesn't work on some boards, probably a HW BUG */ - if (rate) { - clk_reg_disable(clk); /*enable bit is inverted */ - if (!clk_wait_for_pll_lock(clk)) { - clk->rate = CLK_RATE_13MHZ; - } else { - clk_reg_enable(clk); - clk->rate = 0; - } - - } else { - clk_reg_enable(clk); - clk->rate = 0; - } -#endif - return 0; -} - -/* Clock sources */ - -static struct clk osc_13MHz = { - .name = "osc_13MHz", - .flags = FIXED_RATE, - .rate = CLK_RATE_13MHZ, -}; - -static struct clk ck_13MHz = { - .name = "ck_13MHz", - .parent = &osc_13MHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &ck_13MHz_round_rate, - .set_rate = &ck_13MHz_set_rate, - .enable_reg = OSC13CTRL_REG, - .enable_shift = 0, - .rate = CLK_RATE_13MHZ, -}; - -static struct clk osc_32KHz = { - .name = "osc_32KHz", - .flags = FIXED_RATE, - .rate = CLK_RATE_32KHZ, -}; - -/*attached to PLL5*/ -static struct clk ck_1MHz = { - .name = "ck_1MHz", - .flags = FIXED_RATE | PARENT_SET_RATE, - .parent = &ck_13MHz, -}; - -/* PLL1 (397) - provides 13' MHz clock */ -static struct clk ck_pll1 = { - .name = "ck_pll1", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &ck_13MHz_round_rate, - .set_rate = &pll1_set_rate, - .enable_reg = PLLCTRL_REG, - .enable_shift = 1, - .scale_reg = PLLCTRL_REG, - .rate = CLK_RATE_13MHZ, -}; - -/* CPU/Bus PLL */ -static struct clk ck_pll4 = { - .name = "ck_pll4", - .parent = &ck_pll1, - .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION, - .propagate_next = &per_ck, - .round_rate = &pll4_round_rate, - .set_rate = &pll160_set_rate, - .rate = CLK_RATE_208MHZ, - .scale_reg = HCLKPLLCTRL_REG, - .enable_reg = PWRCTRL_REG, - .enable_shift = 2, - .parent_switch_reg = SYSCLKCTRL_REG, - .set_parent = &set_13MHz_parent, -}; - -/* USB PLL */ -static struct clk ck_pll5 = { - .name = "ck_pll5", - .parent = &ck_1MHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &pll5_round_rate, - .set_rate = &pll160_set_rate, - .scale_reg = USBCTRL_REG, - .enable_reg = USBCTRL_REG, - .enable_shift = 18, - .enable_reg1 = USBCTRL_REG, - .enable_shift1 = 17, -}; - -/* XPERTTeak DSP PLL */ -static struct clk ck_pll3 = { - .name = "ck_pll3", - .parent = &ck_pll1, - .flags = NEEDS_INITIALIZATION, - .round_rate = &pll3_round_rate, - .set_rate = &pll160_set_rate, - .scale_reg = DSPPLLCTRL_REG, - .enable_reg = DSPCLKCTRL_REG, - .enable_shift = 3, - .enable_reg1 = DSPCLKCTRL_REG, - .enable_shift1 = 2, - .parent_switch_reg = DSPCLKCTRL_REG, - .set_parent = &set_13MHz_parent, -}; - -static struct clk hclk_ck = { - .name = "hclk_ck", - .parent = &ck_pll4, - .flags = PARENT_SET_RATE, - .set_rate = &hclk_set_rate, - .round_rate = &hclk_round_rate, - .scale_reg = HCLKDIVCTRL_REG, - .rate = 2, - .user_rate = 2, -}; - -static struct clk per_ck = { - .name = "per_ck", - .parent = &ck_pll4, - .flags = FIXED_RATE, - .propagate_next = &hclk_ck, - .set_rate = &per_clk_set_rate, - .round_rate = &per_clk_round_rate, - .scale_reg = HCLKDIVCTRL_REG, - .rate = CLK_RATE_13MHZ, - .user_rate = CLK_RATE_13MHZ, -}; - -static struct clk m2hclk_ck = { - .name = "m2hclk_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_inv_set_rate, - .rate = 1, - .enable_shift = 6, - .enable_reg = PWRCTRL_REG, -}; - -static struct clk vfp9_ck = { - .name = "vfp9_ck", - .parent = &ck_pll4, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 4, - .enable_reg = VFP9CLKCTRL_REG, -}; - -static struct clk keyscan_ck = { - .name = "keyscan_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = KEYCLKCTRL_REG, -}; - -static struct clk touch_ck = { - .name = "touch_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = TSCLKCTRL_REG, -}; - -static struct clk pwm1_ck = { - .name = "pwm1_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = PWMCLKCTRL_REG, -}; - -static struct clk pwm2_ck = { - .name = "pwm2_ck", - .parent = &osc_32KHz, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 2, - .enable_reg = PWMCLKCTRL_REG, -}; - -static struct clk jpeg_ck = { - .name = "jpeg_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = JPEGCLKCTRL_REG, -}; - -static struct clk ms_ck = { - .name = "ms_ck", - .parent = &ck_pll4, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 5, - .enable_reg = MSCTRL_REG, -}; - -static struct clk dum_ck = { - .name = "dum_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = DUMCLKCTRL_REG, -}; - -static struct clk flash_ck = { - .name = "flash_ck", - .parent = &hclk_ck, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 1, /* Only MLC clock supported */ - .enable_reg = FLASHCLKCTRL_REG, -}; - -static struct clk i2c0_ck = { - .name = "i2c0_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 0, - .enable_reg = I2CCLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk i2c1_ck = { - .name = "i2c1_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 1, - .enable_reg = I2CCLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk i2c2_ck = { - .name = "i2c2_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION | FIXED_RATE, - .enable_shift = 2, - .enable_reg = USB_OTG_CLKCTRL_REG, - .rate = 13000000, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -static struct clk spi0_ck = { - .name = "spi0_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = SPICTRL_REG, -}; - -static struct clk spi1_ck = { - .name = "spi1_ck", - .parent = &hclk_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 4, - .enable_reg = SPICTRL_REG, -}; - -static struct clk dma_ck = { - .name = "dma_ck", - .parent = &hclk_ck, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 0, - .enable_reg = DMACLKCTRL_REG, -}; - -static struct clk uart3_ck = { - .name = "uart3_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 0, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart4_ck = { - .name = "uart4_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 1, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart5_ck = { - .name = "uart5_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .rate = 1, - .enable_shift = 2, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk uart6_ck = { - .name = "uart6_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .round_rate = &on_off_round_rate, - .set_rate = &on_off_set_rate, - .enable_shift = 3, - .enable_reg = UARTCLKCTRL_REG, -}; - -static struct clk wdt_ck = { - .name = "wdt_ck", - .parent = &per_ck, - .flags = NEEDS_INITIALIZATION, - .enable_shift = 0, - .enable_reg = TIMCLKCTRL_REG, - .enable = clk_reg_enable, - .disable = clk_reg_disable, -}; - -/* These clocks are visible outside this module - * and can be initialized - */ -static struct clk *onchip_clks[] __initdata = { - &ck_13MHz, - &ck_pll1, - &ck_pll4, - &ck_pll5, - &ck_pll3, - &vfp9_ck, - &m2hclk_ck, - &hclk_ck, - &dma_ck, - &flash_ck, - &dum_ck, - &keyscan_ck, - &pwm1_ck, - &pwm2_ck, - &jpeg_ck, - &ms_ck, - &touch_ck, - &i2c0_ck, - &i2c1_ck, - &i2c2_ck, - &spi0_ck, - &spi1_ck, - &uart3_ck, - &uart4_ck, - &uart5_ck, - &uart6_ck, - &wdt_ck, -}; - -static struct clk_lookup onchip_clkreg[] = { - { .clk = &ck_13MHz, .con_id = "ck_13MHz" }, - { .clk = &ck_pll1, .con_id = "ck_pll1" }, - { .clk = &ck_pll4, .con_id = "ck_pll4" }, - { .clk = &ck_pll5, .con_id = "ck_pll5" }, - { .clk = &ck_pll3, .con_id = "ck_pll3" }, - { .clk = &vfp9_ck, .con_id = "vfp9_ck" }, - { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" }, - { .clk = &hclk_ck, .con_id = "hclk_ck" }, - { .clk = &dma_ck, .con_id = "dma_ck" }, - { .clk = &flash_ck, .con_id = "flash_ck" }, - { .clk = &dum_ck, .con_id = "dum_ck" }, - { .clk = &keyscan_ck, .con_id = "keyscan_ck" }, - { .clk = &pwm1_ck, .con_id = "pwm1_ck" }, - { .clk = &pwm2_ck, .con_id = "pwm2_ck" }, - { .clk = &jpeg_ck, .con_id = "jpeg_ck" }, - { .clk = &ms_ck, .con_id = "ms_ck" }, - { .clk = &touch_ck, .con_id = "touch_ck" }, - { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" }, - { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" }, - { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" }, - { .clk = &spi0_ck, .con_id = "spi0_ck" }, - { .clk = &spi1_ck, .con_id = "spi1_ck" }, - { .clk = &uart3_ck, .con_id = "uart3_ck" }, - { .clk = &uart4_ck, .con_id = "uart4_ck" }, - { .clk = &uart5_ck, .con_id = "uart5_ck" }, - { .clk = &uart6_ck, .con_id = "uart6_ck" }, - { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" }, -}; - -static void local_clk_disable(struct clk *clk) -{ - if (WARN_ON(clk->usecount == 0)) - return; - - if (!(--clk->usecount)) { - if (clk->disable) - clk->disable(clk); - else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) - clk->set_rate(clk, 0); - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk->usecount == 0) { - if (clk->parent) { - ret = local_clk_enable(clk->parent); - if (ret != 0) - goto out; - } - - if (clk->enable) - ret = clk->enable(clk); - else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate - && clk->user_rate) - ret = clk->set_rate(clk, clk->user_rate); - - if (ret != 0 && clk->parent) { - local_clk_disable(clk->parent); - goto out; - } - - clk->usecount++; - } -out: - return ret; -} - -static int local_set_rate(struct clk *clk, u32 rate) -{ - int ret = -EINVAL; - if (clk->set_rate) { - - if (clk->user_rate == clk->rate && clk->parent->rate) { - /* if clock enabled or rate not set */ - clk->user_rate = clk->round_rate(clk, rate); - ret = clk->set_rate(clk, clk->user_rate); - } else - clk->user_rate = clk->round_rate(clk, rate); - ret = 0; - } - return ret; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk->flags & FIXED_RATE) - goto out; - - clock_lock(); - if ((clk->flags & PARENT_SET_RATE) && clk->parent) { - - clk->user_rate = clk->round_rate(clk, rate); - /* parent clock needs to be refreshed - for the setting to take effect */ - } else { - ret = local_set_rate(clk, rate); - } - ret = 0; - clock_unlock(); - -out: - return ret; -} - -EXPORT_SYMBOL(clk_set_rate); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long ret; - clock_lock(); - ret = clk->rate; - clock_unlock(); - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_enable(struct clk *clk) -{ - int ret; - - clock_lock(); - ret = local_clk_enable(clk); - clock_unlock(); - return ret; -} - -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - clock_lock(); - local_clk_disable(clk); - clock_unlock(); -} - -EXPORT_SYMBOL(clk_disable); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret; - clock_lock(); - if (clk->round_rate) - ret = clk->round_rate(clk, rate); - else - ret = clk->rate; - clock_unlock(); - return ret; -} - -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -ENODEV; - if (!clk->set_parent) - goto out; - - clock_lock(); - ret = clk->set_parent(clk, parent); - if (!ret) - clk->parent = parent; - clock_unlock(); - -out: - return ret; -} - -EXPORT_SYMBOL(clk_set_parent); - -static int __init clk_init(void) -{ - struct clk **clkp; - - /* Disable autoclocking, as it doesn't seem to work */ - __raw_writel(0xff, AUTOCLK_CTRL); - - for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); - clkp++) { - struct clk *clk = *clkp; - if (clk->flags & NEEDS_INITIALIZATION) { - if (clk->set_rate) { - clk->user_rate = clk->rate; - local_set_rate(clk, clk->user_rate); - if (clk->set_parent) - clk->set_parent(clk, clk->parent); - } - if (clk->enable && clk->usecount) - clk->enable(clk); - if (clk->disable && !clk->usecount) - clk->disable(clk); - } - pr_debug("%s: clock %s, rate %ld\n", - __func__, clk->name, clk->rate); - } - - local_clk_enable(&ck_pll4); - - /* if ck_13MHz is not used, disable it. */ - if (ck_13MHz.usecount == 0) - local_clk_disable(&ck_13MHz); - - /* Disable autoclocking */ - __raw_writeb(0xff, AUTOCLK_CTRL); - - clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg)); - - return 0; -} - -arch_initcall(clk_init); diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h deleted file mode 100644 index 39720d6c0d01..000000000000 --- a/arch/arm/mach-pnx4008/clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-pnx4008/clock.h - * - * Clock control driver for PNX4008 - internal header file - * - * Author: Vitaly Wool <source@mvista.com> - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ARCH_ARM_PNX4008_CLOCK_H__ -#define __ARCH_ARM_PNX4008_CLOCK_H__ - -struct clk { - const char *name; - struct clk *parent; - struct clk *propagate_next; - u32 rate; - u32 user_rate; - s8 usecount; - u32 flags; - u32 scale_reg; - u8 enable_shift; - u32 enable_reg; - u8 enable_shift1; - u32 enable_reg1; - u32 parent_switch_reg; - u32(*round_rate) (struct clk *, u32); - int (*set_rate) (struct clk *, u32); - int (*set_parent) (struct clk * clk, struct clk * parent); - int (*enable)(struct clk *); - void (*disable)(struct clk *); -}; - -/* Flags */ -#define RATE_PROPAGATES (1<<0) -#define NEEDS_INITIALIZATION (1<<1) -#define PARENT_SET_RATE (1<<2) -#define FIXED_RATE (1<<3) - -#endif diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c deleted file mode 100644 index a00d2f1254ed..000000000000 --- a/arch/arm/mach-pnx4008/core.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * arch/arm/mach-pnx4008/core.c - * - * PNX4008 core startup code - * - * Authors: Vitaly Wool, Dmitry Chigirev, - * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/system_misc.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include <mach/irq.h> -#include <mach/clock.h> -#include <mach/dma.h> - -struct resource spipnx_0_resources[] = { - { - .start = PNX4008_SPI1_BASE, - .end = PNX4008_SPI1_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, { - .start = PER_SPI1_REC_XMIT, - .flags = IORESOURCE_DMA, - }, { - .start = SPI1_INT, - .flags = IORESOURCE_IRQ, - }, { - .flags = 0, - }, -}; - -struct resource spipnx_1_resources[] = { - { - .start = PNX4008_SPI2_BASE, - .end = PNX4008_SPI2_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, { - .start = PER_SPI2_REC_XMIT, - .flags = IORESOURCE_DMA, - }, { - .start = SPI2_INT, - .flags = IORESOURCE_IRQ, - }, { - .flags = 0, - } -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static struct platform_device spipnx_1 = { - .name = "spipnx", - .id = 1, - .num_resources = ARRAY_SIZE(spipnx_0_resources), - .resource = spipnx_0_resources, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct platform_device spipnx_2 = { - .name = "spipnx", - .id = 2, - .num_resources = ARRAY_SIZE(spipnx_1_resources), - .resource = spipnx_1_resources, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -static struct plat_serial8250_port platform_serial_ports[] = { - { - .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)), - .mapbase = (unsigned long)PNX4008_UART5_BASE, - .irq = IIR5_INT, - .uartclk = PNX4008_UART_CLK, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST, - }, - { - .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)), - .mapbase = (unsigned long)PNX4008_UART3_BASE, - .irq = IIR3_INT, - .uartclk = PNX4008_UART_CLK, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST, - }, - {} -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = &platform_serial_ports, - }, -}; - -static struct platform_device nand_flash_device = { - .name = "pnx4008-flash", - .id = -1, - .dev = { - .coherent_dma_mask = 0xFFFFFFFF, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32) 0; - -static struct resource ohci_resources[] = { - { - .start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE), - .end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100), - .flags = IORESOURCE_MEM, - }, { - .start = USB_HOST_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "pnx4008-usb-ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static struct platform_device sdum_device = { - .name = "pnx4008-sdum", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device rgbfb_device = { - .name = "pnx4008-rgbfb", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - } -}; - -struct resource watchdog_resources[] = { - { - .start = PNX4008_WDOG_BASE, - .end = PNX4008_WDOG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device watchdog_device = { - .name = "pnx4008-watchdog", - .id = -1, - .num_resources = ARRAY_SIZE(watchdog_resources), - .resource = watchdog_resources, -}; - -static struct platform_device *devices[] __initdata = { - &spipnx_1, - &spipnx_2, - &serial_device, - &ohci_device, - &nand_flash_device, - &sdum_device, - &rgbfb_device, - &watchdog_device, -}; - - -extern void pnx4008_uart_init(void); - -static void __init pnx4008_init(void) -{ - /*disable all START interrupt sources, - and clear all START interrupt flags */ - __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT)); - __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT)); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - /* Switch on the UART clocks */ - pnx4008_uart_init(); -} - -static struct map_desc pnx4008_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(PNX4008_IRAM_BASE), - .pfn = __phys_to_pfn(PNX4008_IRAM_BASE), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE), - .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE), - .length = SZ_1M - SZ_128K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE), - .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE), - .length = SZ_128K * 3, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE), - .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE), - .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE), - .length = SZ_1M, - .type = MT_DEVICE, - }, -}; - -void __init pnx4008_map_io(void) -{ - iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc)); -} - -static void pnx4008_restart(char mode, const char *cmd) -{ - soft_restart(0); -} - -#ifdef CONFIG_PM -extern int pnx4008_pm_init(void); -#else -static inline int pnx4008_pm_init(void) { return 0; } -#endif - -void __init pnx4008_init_late(void) -{ - pnx4008_pm_init(); -} - -extern struct sys_timer pnx4008_timer; - -MACHINE_START(PNX4008, "Philips PNX4008") - /* Maintainer: MontaVista Software Inc. */ - .atag_offset = 0x100, - .map_io = pnx4008_map_io, - .init_irq = pnx4008_init_irq, - .init_machine = pnx4008_init, - .init_late = pnx4008_init_late, - .timer = &pnx4008_timer, - .restart = pnx4008_restart, -MACHINE_END diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c deleted file mode 100644 index a4739e9fb2fb..000000000000 --- a/arch/arm/mach-pnx4008/dma.c +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/dma.c - * - * PNX4008 DMA registration and IRQ dispatching - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * Based on the code from Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/dma-mapping.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gfp.h> - -#include <mach/hardware.h> -#include <mach/dma.h> -#include <asm/dma-mapping.h> -#include <mach/clock.h> - -static struct dma_channel { - char *name; - void (*irq_handler) (int, int, void *); - void *data; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - void *target_addr; - int target_id; -} dma_channels[MAX_DMA_CHANNELS]; - -static struct ll_pool { - void *vaddr; - void *cur; - dma_addr_t dma_addr; - int count; -} ll_pool; - -static DEFINE_SPINLOCK(ll_lock); - -struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma) -{ - struct pnx4008_dma_ll *ll = NULL; - unsigned long flags; - - spin_lock_irqsave(&ll_lock, flags); - if (ll_pool.count > 4) { /* can give one more */ - ll = *(struct pnx4008_dma_ll **) ll_pool.cur; - *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr); - *(void **)ll_pool.cur = **(void ***)ll_pool.cur; - memset(ll, 0, sizeof(*ll)); - ll_pool.count--; - } - spin_unlock_irqrestore(&ll_lock, flags); - - return ll; -} - -EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry); - -void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma) -{ - unsigned long flags; - - if (ll) { - if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) { - printk(KERN_ERR "Trying to free entry not allocated by DMA\n"); - BUG(); - } - - if (ll->flags & DMA_BUFFER_ALLOCATED) - ll->free(ll->alloc_data); - - spin_lock_irqsave(&ll_lock, flags); - *(long *)ll = *(long *)ll_pool.cur; - *(long *)ll_pool.cur = (long)ll; - ll_pool.count++; - spin_unlock_irqrestore(&ll_lock, flags); - } -} - -EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry); - -void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll) -{ - struct pnx4008_dma_ll *ptr; - u32 dma; - - while (ll) { - dma = ll->next_dma; - ptr = ll->next; - pnx4008_free_ll_entry(ll, ll_dma); - - ll_dma = dma; - ll = ptr; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_free_ll); - -static int dma_channels_requested = 0; - -static inline void dma_increment_usage(void) -{ - if (!dma_channels_requested++) { - struct clk *clk = clk_get(0, "dma_ck"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 1); - clk_put(clk); - } - pnx4008_config_dma(-1, -1, 1); - } -} -static inline void dma_decrement_usage(void) -{ - if (!--dma_channels_requested) { - struct clk *clk = clk_get(0, "dma_ck"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, 0); - clk_put(clk); - } - pnx4008_config_dma(-1, -1, 0); - - } -} - -static DEFINE_SPINLOCK(dma_lock); - -static inline void pnx4008_dma_lock(void) -{ - spin_lock_irq(&dma_lock); -} - -static inline void pnx4008_dma_unlock(void) -{ - spin_unlock_irq(&dma_lock); -} - -#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS)) - -int pnx4008_request_channel(char *name, int ch, - void (*irq_handler) (int, int, void *), void *data) -{ - int i, found = 0; - - /* basic sanity checks */ - if (!name || (ch != -1 && !VALID_CHANNEL(ch))) - return -EINVAL; - - pnx4008_dma_lock(); - - /* try grabbing a DMA channel with the requested priority */ - for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) { - if (!dma_channels[i].name && (ch == -1 || ch == i)) { - found = 1; - break; - } - } - - if (found) { - dma_increment_usage(); - dma_channels[i].name = name; - dma_channels[i].irq_handler = irq_handler; - dma_channels[i].data = data; - dma_channels[i].ll = NULL; - dma_channels[i].ll_dma = 0; - } else { - printk(KERN_WARNING "No more available DMA channels for %s\n", - name); - i = -ENODEV; - } - - pnx4008_dma_unlock(); - return i; -} - -EXPORT_SYMBOL_GPL(pnx4008_request_channel); - -void pnx4008_free_channel(int ch) -{ - if (!dma_channels[ch].name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, ch); - return; - } - - pnx4008_dma_lock(); - pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll); - dma_channels[ch].ll = NULL; - dma_decrement_usage(); - - dma_channels[ch].name = NULL; - pnx4008_dma_unlock(); -} - -EXPORT_SYMBOL_GPL(pnx4008_free_channel); - -int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable) -{ - unsigned long dma_cfg = __raw_readl(DMAC_CONFIG); - - switch (ahb_m1_be) { - case 0: - dma_cfg &= ~(1 << 1); - break; - case 1: - dma_cfg |= (1 << 1); - break; - default: - break; - } - - switch (ahb_m2_be) { - case 0: - dma_cfg &= ~(1 << 2); - break; - case 1: - dma_cfg |= (1 << 2); - break; - default: - break; - } - - switch (enable) { - case 0: - dma_cfg &= ~(1 << 0); - break; - case 1: - dma_cfg |= (1 << 0); - break; - default: - break; - } - - pnx4008_dma_lock(); - __raw_writel(dma_cfg, DMAC_CONFIG); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_config_dma); - -int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl, - unsigned long *ctrl) -{ - int i = 0, dbsize, sbsize, err = 0; - - if (!ctrl || !ch_ctrl) { - err = -EINVAL; - goto out; - } - - *ctrl = 0; - - switch (ch_ctrl->tc_mask) { - case 0: - break; - case 1: - *ctrl |= (1 << 31); - break; - - default: - err = -EINVAL; - goto out; - } - - switch (ch_ctrl->cacheable) { - case 0: - break; - case 1: - *ctrl |= (1 << 30); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->bufferable) { - case 0: - break; - case 1: - *ctrl |= (1 << 29); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->priv_mode) { - case 0: - break; - case 1: - *ctrl |= (1 << 28); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->di) { - case 0: - break; - case 1: - *ctrl |= (1 << 27); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->si) { - case 0: - break; - case 1: - *ctrl |= (1 << 26); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->dest_ahb1) { - case 0: - break; - case 1: - *ctrl |= (1 << 25); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->src_ahb1) { - case 0: - break; - case 1: - *ctrl |= (1 << 24); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->dwidth) { - case WIDTH_BYTE: - *ctrl &= ~(7 << 21); - break; - case WIDTH_HWORD: - *ctrl &= ~(7 << 21); - *ctrl |= (1 << 21); - break; - case WIDTH_WORD: - *ctrl &= ~(7 << 21); - *ctrl |= (2 << 21); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_ctrl->swidth) { - case WIDTH_BYTE: - *ctrl &= ~(7 << 18); - break; - case WIDTH_HWORD: - *ctrl &= ~(7 << 18); - *ctrl |= (1 << 18); - break; - case WIDTH_WORD: - *ctrl &= ~(7 << 18); - *ctrl |= (2 << 18); - break; - - default: - err = -EINVAL; - goto out; - } - dbsize = ch_ctrl->dbsize; - while (!(dbsize & 1)) { - i++; - dbsize >>= 1; - } - if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) { - err = -EINVAL; - goto out; - } else if (i > 1) - i--; - *ctrl &= ~(7 << 15); - *ctrl |= (i << 15); - - sbsize = ch_ctrl->sbsize; - while (!(sbsize & 1)) { - i++; - sbsize >>= 1; - } - if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) { - err = -EINVAL; - goto out; - } else if (i > 1) - i--; - *ctrl &= ~(7 << 12); - *ctrl |= (i << 12); - - if (ch_ctrl->tr_size > 0x7ff) { - err = -E2BIG; - goto out; - } - *ctrl &= ~0x7ff; - *ctrl |= ch_ctrl->tr_size & 0x7ff; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control); - -int pnx4008_dma_parse_control(unsigned long ctrl, - struct pnx4008_dma_ch_ctrl * ch_ctrl) -{ - int err = 0; - - if (!ch_ctrl) { - err = -EINVAL; - goto out; - } - - ch_ctrl->tr_size = ctrl & 0x7ff; - ctrl >>= 12; - - ch_ctrl->sbsize = 1 << (ctrl & 7); - if (ch_ctrl->sbsize > 1) - ch_ctrl->sbsize <<= 1; - ctrl >>= 3; - - ch_ctrl->dbsize = 1 << (ctrl & 7); - if (ch_ctrl->dbsize > 1) - ch_ctrl->dbsize <<= 1; - ctrl >>= 3; - - switch (ctrl & 7) { - case 0: - ch_ctrl->swidth = WIDTH_BYTE; - break; - case 1: - ch_ctrl->swidth = WIDTH_HWORD; - break; - case 2: - ch_ctrl->swidth = WIDTH_WORD; - break; - default: - err = -EINVAL; - goto out; - } - ctrl >>= 3; - - switch (ctrl & 7) { - case 0: - ch_ctrl->dwidth = WIDTH_BYTE; - break; - case 1: - ch_ctrl->dwidth = WIDTH_HWORD; - break; - case 2: - ch_ctrl->dwidth = WIDTH_WORD; - break; - default: - err = -EINVAL; - goto out; - } - ctrl >>= 3; - - ch_ctrl->src_ahb1 = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->dest_ahb1 = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->si = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->di = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->priv_mode = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->bufferable = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->cacheable = ctrl & 1; - ctrl >>= 1; - - ch_ctrl->tc_mask = ctrl & 1; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control); - -int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg, - unsigned long *cfg) -{ - int err = 0; - - if (!cfg || !ch_cfg) { - err = -EINVAL; - goto out; - } - - *cfg = 0; - - switch (ch_cfg->halt) { - case 0: - break; - case 1: - *cfg |= (1 << 18); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->active) { - case 0: - break; - case 1: - *cfg |= (1 << 17); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->lock) { - case 0: - break; - case 1: - *cfg |= (1 << 16); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->itc) { - case 0: - break; - case 1: - *cfg |= (1 << 15); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->ie) { - case 0: - break; - case 1: - *cfg |= (1 << 14); - break; - - default: - err = -EINVAL; - goto out; - } - switch (ch_cfg->flow_cntrl) { - case FC_MEM2MEM_DMA: - *cfg &= ~(7 << 11); - break; - case FC_MEM2PER_DMA: - *cfg &= ~(7 << 11); - *cfg |= (1 << 11); - break; - case FC_PER2MEM_DMA: - *cfg &= ~(7 << 11); - *cfg |= (2 << 11); - break; - case FC_PER2PER_DMA: - *cfg &= ~(7 << 11); - *cfg |= (3 << 11); - break; - case FC_PER2PER_DPER: - *cfg &= ~(7 << 11); - *cfg |= (4 << 11); - break; - case FC_MEM2PER_PER: - *cfg &= ~(7 << 11); - *cfg |= (5 << 11); - break; - case FC_PER2MEM_PER: - *cfg &= ~(7 << 11); - *cfg |= (6 << 11); - break; - case FC_PER2PER_SPER: - *cfg |= (7 << 11); - break; - - default: - err = -EINVAL; - goto out; - } - *cfg &= ~(0x1f << 6); - *cfg |= ((ch_cfg->dest_per & 0x1f) << 6); - - *cfg &= ~(0x1f << 1); - *cfg |= ((ch_cfg->src_per & 0x1f) << 1); - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config); - -int pnx4008_dma_parse_config(unsigned long cfg, - struct pnx4008_dma_ch_config * ch_cfg) -{ - int err = 0; - - if (!ch_cfg) { - err = -EINVAL; - goto out; - } - - cfg >>= 1; - - ch_cfg->src_per = cfg & 0x1f; - cfg >>= 5; - - ch_cfg->dest_per = cfg & 0x1f; - cfg >>= 5; - - switch (cfg & 7) { - case 0: - ch_cfg->flow_cntrl = FC_MEM2MEM_DMA; - break; - case 1: - ch_cfg->flow_cntrl = FC_MEM2PER_DMA; - break; - case 2: - ch_cfg->flow_cntrl = FC_PER2MEM_DMA; - break; - case 3: - ch_cfg->flow_cntrl = FC_PER2PER_DMA; - break; - case 4: - ch_cfg->flow_cntrl = FC_PER2PER_DPER; - break; - case 5: - ch_cfg->flow_cntrl = FC_MEM2PER_PER; - break; - case 6: - ch_cfg->flow_cntrl = FC_PER2MEM_PER; - break; - case 7: - ch_cfg->flow_cntrl = FC_PER2PER_SPER; - } - cfg >>= 3; - - ch_cfg->ie = cfg & 1; - cfg >>= 1; - - ch_cfg->itc = cfg & 1; - cfg >>= 1; - - ch_cfg->lock = cfg & 1; - cfg >>= 1; - - ch_cfg->active = cfg & 1; - cfg >>= 1; - - ch_cfg->halt = cfg & 1; - -out: - return err; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config); - -void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config, - struct pnx4008_dma_ch_ctrl * ctrl) -{ - int new_len = ctrl->tr_size, num_entries = 0; - int old_len = new_len; - int src_width, dest_width, count = 1; - - switch (ctrl->swidth) { - case WIDTH_BYTE: - src_width = 1; - break; - case WIDTH_HWORD: - src_width = 2; - break; - case WIDTH_WORD: - src_width = 4; - break; - default: - return; - } - - switch (ctrl->dwidth) { - case WIDTH_BYTE: - dest_width = 1; - break; - case WIDTH_HWORD: - dest_width = 2; - break; - case WIDTH_WORD: - dest_width = 4; - break; - default: - return; - } - - while (new_len > 0x7FF) { - num_entries++; - new_len = (ctrl->tr_size + num_entries) / (num_entries + 1); - } - if (num_entries != 0) { - struct pnx4008_dma_ll *ll = NULL; - config->ch_ctrl &= ~0x7ff; - config->ch_ctrl |= new_len; - if (!config->is_ll) { - config->is_ll = 1; - while (num_entries) { - if (!ll) { - config->ll = - pnx4008_alloc_ll_entry(&config-> - ll_dma); - ll = config->ll; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - config->src_addr + - src_width * new_len * count; - else - ll->src_addr = config->src_addr; - if (ctrl->di) - ll->dest_addr = - config->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = config->dest_addr; - ll->ch_ctrl = config->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - } else { - struct pnx4008_dma_ll *ll_old = config->ll; - unsigned long ll_dma_old = config->ll_dma; - while (num_entries) { - if (!ll) { - config->ll = - pnx4008_alloc_ll_entry(&config-> - ll_dma); - ll = config->ll; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - config->src_addr + - src_width * new_len * count; - else - ll->src_addr = config->src_addr; - if (ctrl->di) - ll->dest_addr = - config->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = config->dest_addr; - ll->ch_ctrl = config->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - ll->next_dma = ll_dma_old; - ll->next = ll_old; - } - /* adjust last length/tc */ - ll->ch_ctrl = config->ch_ctrl & (~0x7ff); - ll->ch_ctrl |= old_len - new_len * (count - 1); - config->ch_ctrl &= 0x7fffffff; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry); - -void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll, - struct pnx4008_dma_ch_ctrl * ctrl) -{ - int new_len = ctrl->tr_size, num_entries = 0; - int old_len = new_len; - int src_width, dest_width, count = 1; - - switch (ctrl->swidth) { - case WIDTH_BYTE: - src_width = 1; - break; - case WIDTH_HWORD: - src_width = 2; - break; - case WIDTH_WORD: - src_width = 4; - break; - default: - return; - } - - switch (ctrl->dwidth) { - case WIDTH_BYTE: - dest_width = 1; - break; - case WIDTH_HWORD: - dest_width = 2; - break; - case WIDTH_WORD: - dest_width = 4; - break; - default: - return; - } - - while (new_len > 0x7FF) { - num_entries++; - new_len = (ctrl->tr_size + num_entries) / (num_entries + 1); - } - if (num_entries != 0) { - struct pnx4008_dma_ll *ll = NULL; - cur_ll->ch_ctrl &= ~0x7ff; - cur_ll->ch_ctrl |= new_len; - if (!cur_ll->next) { - while (num_entries) { - if (!ll) { - cur_ll->next = - pnx4008_alloc_ll_entry(&cur_ll-> - next_dma); - ll = cur_ll->next; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - cur_ll->src_addr + - src_width * new_len * count; - else - ll->src_addr = cur_ll->src_addr; - if (ctrl->di) - ll->dest_addr = - cur_ll->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = cur_ll->dest_addr; - ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - } else { - struct pnx4008_dma_ll *ll_old = cur_ll->next; - unsigned long ll_dma_old = cur_ll->next_dma; - while (num_entries) { - if (!ll) { - cur_ll->next = - pnx4008_alloc_ll_entry(&cur_ll-> - next_dma); - ll = cur_ll->next; - } else { - ll->next = - pnx4008_alloc_ll_entry(&ll-> - next_dma); - ll = ll->next; - } - - if (ctrl->si) - ll->src_addr = - cur_ll->src_addr + - src_width * new_len * count; - else - ll->src_addr = cur_ll->src_addr; - if (ctrl->di) - ll->dest_addr = - cur_ll->dest_addr + - dest_width * new_len * count; - else - ll->dest_addr = cur_ll->dest_addr; - ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff; - ll->next_dma = 0; - ll->next = NULL; - num_entries--; - count++; - } - - ll->next_dma = ll_dma_old; - ll->next = ll_old; - } - /* adjust last length/tc */ - ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff); - ll->ch_ctrl |= old_len - new_len * (count - 1); - cur_ll->ch_ctrl &= 0x7fffffff; - } -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry); - -int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config) -{ - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch)); - __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch)); - - if (config->is_ll) - __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch)); - else - __raw_writel(0, DMAC_Cx_LLI(ch)); - - __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch)); - __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; - -} - -EXPORT_SYMBOL_GPL(pnx4008_config_channel); - -int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config) -{ - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config) - return -EINVAL; - - pnx4008_dma_lock(); - config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch)); - - config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch)); - config->is_ll = config->ll_dma ? 1 : 0; - - config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch)); - config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_channel_get_config); - -int pnx4008_dma_ch_enable(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - ch_cfg |= 1; - __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable); - -int pnx4008_dma_ch_disable(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - ch_cfg &= ~1; - __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return 0; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable); - -int pnx4008_dma_ch_enabled(int ch) -{ - unsigned long ch_cfg; - - if (!VALID_CHANNEL(ch) || !dma_channels[ch].name) - return -EINVAL; - - pnx4008_dma_lock(); - ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch)); - pnx4008_dma_unlock(); - - return ch_cfg & 1; -} - -EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled); - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i; - unsigned long dint = __raw_readl(DMAC_INT_STAT); - unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT); - unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT); - unsigned long i_bit; - - for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) { - i_bit = 1 << i; - if (dint & i_bit) { - struct dma_channel *channel = &dma_channels[i]; - - if (channel->name && channel->irq_handler) { - int cause = 0; - - if (eint & i_bit) - cause |= DMA_ERR_INT; - if (tcint & i_bit) - cause |= DMA_TC_INT; - channel->irq_handler(i, cause, channel->data); - } else { - /* - * IRQ for an unregistered DMA channel - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", i); - } - if (tcint & i_bit) - __raw_writel(i_bit, DMAC_INT_TC_CLEAR); - if (eint & i_bit) - __raw_writel(i_bit, DMAC_INT_ERR_CLEAR); - } - } - return IRQ_HANDLED; -} - -static int __init pnx4008_dma_init(void) -{ - int ret, i; - - ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n"); - goto out; - } - - ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll); - ll_pool.cur = ll_pool.vaddr = - dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll), - &ll_pool.dma_addr, GFP_KERNEL); - - if (!ll_pool.vaddr) { - ret = -ENOMEM; - free_irq(DMA_INT, NULL); - goto out; - } - - for (i = 0; i < ll_pool.count - 1; i++) { - void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll); - *addr = (void *)addr + sizeof(struct pnx4008_dma_ll); - } - *(long *)(ll_pool.vaddr + - (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) = - (long)ll_pool.vaddr; - - __raw_writel(1, DMAC_CONFIG); - -out: - return ret; -} -arch_initcall(pnx4008_dma_init); diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c deleted file mode 100644 index d3e71d3847b4..000000000000 --- a/arch/arm/mach-pnx4008/gpio.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/mach-pnx4008/gpio.c - * - * PNX4008 GPIO driver - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/gpio-pnx4008.h> - -/* register definitions */ -#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE) - -#define PIO_INP_STATE (0x00U) -#define PIO_OUTP_SET (0x04U) -#define PIO_OUTP_CLR (0x08U) -#define PIO_OUTP_STATE (0x0CU) -#define PIO_DRV_SET (0x10U) -#define PIO_DRV_CLR (0x14U) -#define PIO_DRV_STATE (0x18U) -#define PIO_SDINP_STATE (0x1CU) -#define PIO_SDOUTP_SET (0x20U) -#define PIO_SDOUTP_CLR (0x24U) -#define PIO_MUX_SET (0x28U) -#define PIO_MUX_CLR (0x2CU) -#define PIO_MUX_STATE (0x30U) - -static inline void gpio_lock(void) -{ - local_irq_disable(); -} - -static inline void gpio_unlock(void) -{ - local_irq_enable(); -} - -/* Inline functions */ -static inline int gpio_read_bit(u32 reg, int gpio) -{ - u32 bit, val; - int ret = -EFAULT; - - if (gpio < 0) - goto out; - - bit = GPIO_BIT(gpio); - if (bit) { - val = __raw_readl(PIO_VA_BASE + reg); - ret = (val & bit) ? 1 : 0; - } -out: - return ret; -} - -static inline int gpio_set_bit(u32 reg, int gpio) -{ - u32 bit, val; - int ret = -EFAULT; - - if (gpio < 0) - goto out; - - bit = GPIO_BIT(gpio); - if (bit) { - val = __raw_readl(PIO_VA_BASE + reg); - val |= bit; - __raw_writel(val, PIO_VA_BASE + reg); - ret = 0; - } -out: - return ret; -} - -/* Very simple access control, bitmap for allocated/free */ -static unsigned long access_map[4]; -#define INP_INDEX 0 -#define OUTP_INDEX 1 -#define GPIO_INDEX 2 -#define MUX_INDEX 3 - -/*GPIO to Input Mapping */ -static short gpio_to_inp_map[32] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, 10, 11, 12, 13, 14, 24, -1 -}; - -/*GPIO to Mux Mapping */ -static short gpio_to_mux_map[32] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 0, 1, 4, 5, -1 -}; - -/*Output to Mux Mapping */ -static short outp_to_mux_map[32] = { - -1, -1, -1, 6, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, 2, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 -}; - -int pnx4008_gpio_register_pin(unsigned short pin) -{ - unsigned long bit = GPIO_BIT(pin); - int ret = -EBUSY; /* Already in use */ - - gpio_lock(); - - if (GPIO_ISBID(pin)) { - if (access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] |= bit; - - } else if (GPIO_ISRAM(pin)) { - if (access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] |= bit; - - } else if (GPIO_ISMUX(pin)) { - if (access_map[MUX_INDEX] & bit) - goto out; - access_map[MUX_INDEX] |= bit; - - } else if (GPIO_ISOUT(pin)) { - if (access_map[OUTP_INDEX] & bit) - goto out; - access_map[OUTP_INDEX] |= bit; - - } else if (GPIO_ISIN(pin)) { - if (access_map[INP_INDEX] & bit) - goto out; - access_map[INP_INDEX] |= bit; - } else - goto out; - ret = 0; - -out: - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_register_pin); - -int pnx4008_gpio_unregister_pin(unsigned short pin) -{ - unsigned long bit = GPIO_BIT(pin); - int ret = -EFAULT; /* Not registered */ - - gpio_lock(); - - if (GPIO_ISBID(pin)) { - if (~access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] &= ~bit; - } else if (GPIO_ISRAM(pin)) { - if (~access_map[GPIO_INDEX] & bit) - goto out; - access_map[GPIO_INDEX] &= ~bit; - } else if (GPIO_ISMUX(pin)) { - if (~access_map[MUX_INDEX] & bit) - goto out; - access_map[MUX_INDEX] &= ~bit; - } else if (GPIO_ISOUT(pin)) { - if (~access_map[OUTP_INDEX] & bit) - goto out; - access_map[OUTP_INDEX] &= ~bit; - } else if (GPIO_ISIN(pin)) { - if (~access_map[INP_INDEX] & bit) - goto out; - access_map[INP_INDEX] &= ~bit; - } else - goto out; - ret = 0; - -out: - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_unregister_pin); - -unsigned long pnx4008_gpio_read_pin(unsigned short pin) -{ - unsigned long ret = -EFAULT; - int gpio = GPIO_BIT_MASK(pin); - gpio_lock(); - if (GPIO_ISOUT(pin)) { - ret = gpio_read_bit(PIO_OUTP_STATE, gpio); - } else if (GPIO_ISRAM(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) { - ret = gpio_read_bit(PIO_SDINP_STATE, gpio); - } - } else if (GPIO_ISBID(pin)) { - ret = gpio_read_bit(PIO_DRV_STATE, gpio); - if (ret > 0) - ret = gpio_read_bit(PIO_OUTP_STATE, gpio); - else if (ret == 0) - ret = - gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]); - } else if (GPIO_ISIN(pin)) { - ret = gpio_read_bit(PIO_INP_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin); - -/* Write Value to output */ -int pnx4008_gpio_write_pin(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISOUT(pin)) { - printk( "writing '%x' to '%x'\n", - gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR ); - ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio); - } else if (GPIO_ISRAM(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0) - ret = gpio_set_bit(output ? PIO_SDOUTP_SET : - PIO_SDOUTP_CLR, gpio); - } else if (GPIO_ISBID(pin)) { - if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0) - ret = gpio_set_bit(output ? PIO_OUTP_SET : - PIO_OUTP_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_write_pin); - -/* Value = 1 : Set GPIO pin as output */ -/* Value = 0 : Set GPIO pin as input */ -int pnx4008_gpio_set_pin_direction(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) { - ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction); - -/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/ -int pnx4008_gpio_read_pin_direction(unsigned short pin) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) { - ret = gpio_read_bit(PIO_DRV_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction); - -/* Value = 1 : Set pin to muxed function */ -/* Value = 0 : Set pin as GPIO */ -int pnx4008_gpio_set_pin_mux(unsigned short pin, int output) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin)) { - ret = - gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, - gpio_to_mux_map[gpio]); - } else if (GPIO_ISOUT(pin)) { - ret = - gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, - outp_to_mux_map[gpio]); - } else if (GPIO_ISMUX(pin)) { - ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux); - -/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/ -int pnx4008_gpio_read_pin_mux(unsigned short pin) -{ - int gpio = GPIO_BIT_MASK(pin); - int ret = -EFAULT; - - gpio_lock(); - if (GPIO_ISBID(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]); - } else if (GPIO_ISOUT(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]); - } else if (GPIO_ISMUX(pin)) { - ret = gpio_read_bit(PIO_MUX_STATE, gpio); - } - gpio_unlock(); - return ret; -} - -EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux); diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c deleted file mode 100644 index 550cfc2a1f2e..000000000000 --- a/arch/arm/mach-pnx4008/i2c.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * I2C initialization for PNX4008. - * - * Author: Vitaly Wool <vitalywool@gmail.com> - * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/clk.h> -#include <linux/i2c.h> -#include <linux/i2c-pnx.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <mach/platform.h> -#include <mach/irqs.h> - -static struct resource i2c0_resources[] = { - { - .start = PNX4008_I2C1_BASE, - .end = PNX4008_I2C1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_1_INT, - .end = I2C_1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c1_resources[] = { - { - .start = PNX4008_I2C2_BASE, - .end = PNX4008_I2C2_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = I2C_2_INT, - .end = I2C_2_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource i2c2_resources[] = { - { - .start = PNX4008_USB_CONFIG_BASE + 0x300, - .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = USB_I2C_INT, - .end = USB_I2C_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c0_device = { - .name = "pnx-i2c.0", - .id = 0, - .resource = i2c0_resources, - .num_resources = ARRAY_SIZE(i2c0_resources), -}; - -static struct platform_device i2c1_device = { - .name = "pnx-i2c.1", - .id = 1, - .resource = i2c1_resources, - .num_resources = ARRAY_SIZE(i2c1_resources), -}; - -static struct platform_device i2c2_device = { - .name = "pnx-i2c.2", - .id = 2, - .resource = i2c2_resources, - .num_resources = ARRAY_SIZE(i2c2_resources), -}; - -static struct platform_device *devices[] __initdata = { - &i2c0_device, - &i2c1_device, - &i2c2_device, -}; - -void __init pnx4008_register_i2c_devices(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h deleted file mode 100644 index 8d2a5ef52c90..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/clock.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/clock.h - * - * Clock control driver for PNX4008 - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_CLOCK_H__ -#define __PNX4008_CLOCK_H__ - -struct module; -struct clk; - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) -#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) -#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) -#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) -#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) -#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) -#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) -#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) -#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) -#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) -#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) -#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) -#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) -#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) -#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) -#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc) -#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) -#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) -#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) -#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) -#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) -#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) -#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) - -#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) -#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) -#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) -#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) -#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) - -#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) - -#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) - -#define CLK_RATE_13MHZ 13000 -#define CLK_RATE_1MHZ 1000 -#define CLK_RATE_208MHZ 208000 -#define CLK_RATE_48MHZ 48000 -#define CLK_RATE_32KHZ 32 - -#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S deleted file mode 100644 index 469d60d97f5c..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-pnx4008/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00090000 - add \rv, \rp, #0xf4000000 @ virtual - add \rp, \rp, #0x40000000 @ physical - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h deleted file mode 100644 index f094bf8bfb18..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/dma.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/dma.h - * - * PNX4008 DMA header file - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "platform.h" - -#define MAX_DMA_CHANNELS 8 - -#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE) -#define DMAC_INT_STAT (DMAC_BASE + 0x0000) -#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004) -#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008) -#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c) -#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010) -#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024) -#define DMAC_CONFIG (DMAC_BASE + 0x0030) -#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20) -#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20) -#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20) -#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20) -#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20) - -enum { - WIDTH_BYTE = 0, - WIDTH_HWORD, - WIDTH_WORD -}; - -enum { - FC_MEM2MEM_DMA, - FC_MEM2PER_DMA, - FC_PER2MEM_DMA, - FC_PER2PER_DMA, - FC_PER2PER_DPER, - FC_MEM2PER_PER, - FC_PER2MEM_PER, - FC_PER2PER_SPER -}; - -enum { - DMA_INT_UNKNOWN = 0, - DMA_ERR_INT = 1, - DMA_TC_INT = 2, -}; - -enum { - DMA_BUFFER_ALLOCATED = 1, - DMA_HAS_LL = 2, -}; - -enum { - PER_CAM_DMA_1 = 0, - PER_NDF_FLASH = 1, - PER_MBX_SLAVE_FIFO = 2, - PER_SPI2_REC_XMIT = 3, - PER_MS_SD_RX_XMIT = 4, - PER_HS_UART_1_XMIT = 5, - PER_HS_UART_1_RX = 6, - PER_HS_UART_2_XMIT = 7, - PER_HS_UART_2_RX = 8, - PER_HS_UART_7_XMIT = 9, - PER_HS_UART_7_RX = 10, - PER_SPI1_REC_XMIT = 11, - PER_MLC_NDF_SREC = 12, - PER_CAM_DMA_2 = 13, - PER_PRNG_INFIFO = 14, - PER_PRNG_OUTFIFO = 15, -}; - -struct pnx4008_dma_ch_ctrl { - int tc_mask; - int cacheable; - int bufferable; - int priv_mode; - int di; - int si; - int dest_ahb1; - int src_ahb1; - int dwidth; - int swidth; - int dbsize; - int sbsize; - int tr_size; -}; - -struct pnx4008_dma_ch_config { - int halt; - int active; - int lock; - int itc; - int ie; - int flow_cntrl; - int dest_per; - int src_per; -}; - -struct pnx4008_dma_ll { - unsigned long src_addr; - unsigned long dest_addr; - u32 next_dma; - unsigned long ch_ctrl; - struct pnx4008_dma_ll *next; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -struct pnx4008_dma_config { - int is_ll; - unsigned long src_addr; - unsigned long dest_addr; - unsigned long ch_ctrl; - unsigned long ch_cfg; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *); -extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t); -extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *); - -extern int pnx4008_request_channel(char *, int, - void (*)(int, int, void *), - void *); -extern void pnx4008_free_channel(int); -extern int pnx4008_config_dma(int, int, int); -extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *, - unsigned long *); -extern int pnx4008_dma_parse_control(unsigned long, - struct pnx4008_dma_ch_ctrl *); -extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *, - unsigned long *); -extern int pnx4008_dma_parse_config(unsigned long, - struct pnx4008_dma_ch_config *); -extern int pnx4008_config_channel(int, struct pnx4008_dma_config *); -extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *); -extern int pnx4008_dma_ch_enable(int); -extern int pnx4008_dma_ch_disable(int); -extern int pnx4008_dma_ch_enabled(int); -extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *, - struct pnx4008_dma_ch_ctrl *); -extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *, - struct pnx4008_dma_ch_ctrl *); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S deleted file mode 100644 index 77a555846719..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for PNX4008-based platforms - * - * 2005-2006 (c) MontaVista Software, Inc. - * Author: Vitaly Wool <vwool@ru.mvista.com> - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include "platform.h" - -#define IO_BASE 0xF0000000 -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#define INTRC_MASK 0x00 -#define INTRC_RAW_STAT 0x04 -#define INTRC_STAT 0x08 -#define INTRC_POLAR 0x0C -#define INTRC_ACT_TYPE 0x10 -#define INTRC_TYPE 0x14 - -#define SIC1_BASE_INT 32 -#define SIC2_BASE_INT 64 - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* decode the MIC interrupt numbers */ - ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) - ldr \irqstat, [\base, #INTRC_STAT] - - cmp \irqstat,#1<<16 - movhs \irqnr,#16 - movlo \irqnr,#0 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - -/* was there an interrupt ? if not then drop out with EQ status */ - teq \irqstat,#0 - beq 1003f - -/* and now check for extended IRQ reasons */ - cmp \irqnr,#1 - bls 1003f - cmp \irqnr,#30 - blo 1002f - -/* IRQ 31,30 : High priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */ -/* set the base IRQ number */ - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - moveq \irqnr,#SIC1_BASE_INT - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - movne \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - and \irqstat,\irqstat,\tmp - b 1004f - -1003: -/* IRQ 1,0 : Low priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/ -/* read the correct SIC */ -/* set the base IRQ number */ - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - movne \irqnr,#SIC1_BASE_INT - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - moveq \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - bic \irqstat,\irqstat,\tmp - -1004: - - cmp \irqstat,#1<<16 - addhs \irqnr,\irqnr,#16 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - - -/* is irqstat not zero */ - -1002: -/* we assert that irqstat is not equal to zero and return ne status if true*/ - teq \irqstat,#0 -1003: - .endm - diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h deleted file mode 100644 index 41027dd7cf74..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h - * - * PNX4008 GPIO driver - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef _PNX4008_GPIO_H_ -#define _PNX4008_GPIO_H_ - - -/* Block numbers */ -#define GPIO_IN (0) -#define GPIO_OUT (0x100) -#define GPIO_BID (0x200) -#define GPIO_RAM (0x300) -#define GPIO_MUX (0x400) - -#define GPIO_TYPE_MASK(K) ((K) & 0x700) - -/* INPUT GPIOs */ -/* GPI */ -#define GPI_00 (GPIO_IN | 0) -#define GPI_01 (GPIO_IN | 1) -#define GPI_02 (GPIO_IN | 2) -#define GPI_03 (GPIO_IN | 3) -#define GPI_04 (GPIO_IN | 4) -#define GPI_05 (GPIO_IN | 5) -#define GPI_06 (GPIO_IN | 6) -#define GPI_07 (GPIO_IN | 7) -#define GPI_08 (GPIO_IN | 8) -#define GPI_09 (GPIO_IN | 9) -#define U1_RX (GPIO_IN | 15) -#define U2_HTCS (GPIO_IN | 16) -#define U2_RX (GPIO_IN | 17) -#define U3_RX (GPIO_IN | 18) -#define U4_RX (GPIO_IN | 19) -#define U5_RX (GPIO_IN | 20) -#define U6_IRRX (GPIO_IN | 21) -#define U7_HCTS (GPIO_IN | 22) -#define U7_RX (GPIO_IN | 23) -/* MISC IN */ -#define SPI1_DATIN (GPIO_IN | 25) -#define DISP_SYNC (GPIO_IN | 26) -#define SPI2_DATIN (GPIO_IN | 27) -#define GPI_11 (GPIO_IN | 28) - -#define GPIO_IN_MASK 0x1eff83ff - -/* OUTPUT GPIOs */ -/* GPO */ -#define GPO_00 (GPIO_OUT | 0) -#define GPO_01 (GPIO_OUT | 1) -#define GPO_02 (GPIO_OUT | 2) -#define GPO_03 (GPIO_OUT | 3) -#define GPO_04 (GPIO_OUT | 4) -#define GPO_05 (GPIO_OUT | 5) -#define GPO_06 (GPIO_OUT | 6) -#define GPO_07 (GPIO_OUT | 7) -#define GPO_08 (GPIO_OUT | 8) -#define GPO_09 (GPIO_OUT | 9) -#define GPO_10 (GPIO_OUT | 10) -#define GPO_11 (GPIO_OUT | 11) -#define GPO_12 (GPIO_OUT | 12) -#define GPO_13 (GPIO_OUT | 13) -#define GPO_14 (GPIO_OUT | 14) -#define GPO_15 (GPIO_OUT | 15) -#define GPO_16 (GPIO_OUT | 16) -#define GPO_17 (GPIO_OUT | 17) -#define GPO_18 (GPIO_OUT | 18) -#define GPO_19 (GPIO_OUT | 19) -#define GPO_20 (GPIO_OUT | 20) -#define GPO_21 (GPIO_OUT | 21) -#define GPO_22 (GPIO_OUT | 22) -#define GPO_23 (GPIO_OUT | 23) - -#define GPIO_OUT_MASK 0xffffff - -/* BIDIRECTIONAL GPIOs */ -/* RAM pins */ -#define RAM_D19 (GPIO_RAM | 0) -#define RAM_D20 (GPIO_RAM | 1) -#define RAM_D21 (GPIO_RAM | 2) -#define RAM_D22 (GPIO_RAM | 3) -#define RAM_D23 (GPIO_RAM | 4) -#define RAM_D24 (GPIO_RAM | 5) -#define RAM_D25 (GPIO_RAM | 6) -#define RAM_D26 (GPIO_RAM | 7) -#define RAM_D27 (GPIO_RAM | 8) -#define RAM_D28 (GPIO_RAM | 9) -#define RAM_D29 (GPIO_RAM | 10) -#define RAM_D30 (GPIO_RAM | 11) -#define RAM_D31 (GPIO_RAM | 12) - -#define GPIO_RAM_MASK 0x1fff - -/* I/O pins */ -#define GPIO_00 (GPIO_BID | 25) -#define GPIO_01 (GPIO_BID | 26) -#define GPIO_02 (GPIO_BID | 27) -#define GPIO_03 (GPIO_BID | 28) -#define GPIO_04 (GPIO_BID | 29) -#define GPIO_05 (GPIO_BID | 30) - -#define GPIO_BID_MASK 0x7e000000 - -/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ -#define GPIO_SDRAM_SEL (GPIO_MUX | 3) - -#define GPIO_MUX_MASK 0x8 - -/* Extraction/assembly macros */ -#define GPIO_BIT_MASK(K) ((K) & 0x1F) -#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) -#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) -#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) -#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) -#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) -#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 -#define SE_USB_OTG_ATX_INT_N 19 -/*18 unused*/ -#define SE_DSP_GPIO4_INT 17 -#define SE_KEY_IRQ 16 -#define SE_DSP_SLAVEPORT_INT 15 -#define SE_DSP_GPIO1_INT 14 -#define SE_DSP_GPIO0_INT 13 -#define SE_DSP_AHB_INT 12 -/*11-6 unused*/ -#define SE_GPIO_05_INT 5 -#define SE_GPIO_04_INT 4 -#define SE_GPIO_03_INT 3 -#define SE_GPIO_02_INT 2 -#define SE_GPIO_01_INT 1 -#define SE_GPIO_00_INT 0 - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern int pnx4008_gpio_register_pin(unsigned short pin); -extern int pnx4008_gpio_unregister_pin(unsigned short pin); -extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); -extern int pnx4008_gpio_write_pin(unsigned short pin, int output); -extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_direction(unsigned short pin); -extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_mux(unsigned short pin); - -static inline void start_int_umask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_mask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_ack(u8 irq) -{ - __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); -} - -static inline void start_int_set_falling_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -static inline void start_int_set_rising_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -#endif /* _PNX4008_GPIO_H_ */ diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h deleted file mode 100644 index 7b98b828d368..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/hardware.h - * - * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> -#include <mach/platform.h> - -/* Start of virtual addresses for IO devices */ -#define IO_BASE 0xF0000000 - -/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */ -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h deleted file mode 100644 index 2a690ca33870..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/irq.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/irq.h - * - * PNX4008 IRQ controller driver - header file - * this one is used in entry-arnv.S as well so it cannot contain C code - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __PNX4008_IRQ_H__ -#define __PNX4008_IRQ_H__ - -#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) -#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) -#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - -/* Manual: Chapter 20, page 195 */ - -#define INTC_BIT(irq) (1<< ((irq) & 0x1F)) - -#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9))) -#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9))) -#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9))) -#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9))) -#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9))) -#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9))) - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern void __init pnx4008_init_irq(void); - -#endif /* __PNX4008_IRQ_H__ */ diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h deleted file mode 100644 index f6b33cf23ae2..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/irqs.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/irqs.h - * - * PNX4008 IRQ controller driver - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_IRQS_h__ -#define __PNX4008_IRQS_h__ - -#define NR_IRQS 96 - -/*Manual: table 259, page 199*/ - -/*SUB2 Interrupt Routing (SIC2)*/ - -#define SIC2_BASE_INT 64 - -#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ -#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ -#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ -#define GPI_06_INT 92 -#define GPI_05_INT 91 -#define GPI_04_INT 90 -#define GPI_03_INT 89 -#define GPI_02_INT 88 -#define GPI_01_INT 87 -#define GPI_00_INT 86 -#define BT_CLKREQ_INT 85 -#define SPI1_DATIN_INT 84 -#define U5_RX_INT 83 -#define SDIO_INT_N 82 -#define CAM_HS_INT 81 -#define CAM_VS_INT 80 -#define GPI_07_INT 79 -#define DISP_SYNC_INT 78 -#define DSP_INT8 77 -#define U7_HCTS_INT 76 -#define GPI_10_INT 75 -#define GPI_09_INT 74 -#define GPI_08_INT 73 -#define DSP_INT7 72 -#define U2_HCTS_INT 71 -#define SPI2_DATIN_INT 70 -#define GPIO_05_INT 69 -#define GPIO_04_INT 68 -#define GPIO_03_INT 67 -#define GPIO_02_INT 66 -#define GPIO_01_INT 65 -#define GPIO_00_INT 64 - -/*Manual: table 258, page 198*/ - -/*SUB1 Interrupt Routing (SIC1)*/ - -#define SIC1_BASE_INT 32 - -#define USB_I2C_INT 63 -#define USB_DEV_HP_INT 62 -#define USB_DEV_LP_INT 61 -#define USB_DEV_DMA_INT 60 -#define USB_HOST_INT 59 -#define USB_OTG_ATX_INT_N 58 -#define USB_OTG_TIMER_INT 57 -#define SW_INT 56 -#define SPI1_INT 55 -#define KEY_IRQ 54 -#define DSP_M_INT 53 -#define RTC_INT 52 -#define I2C_1_INT 51 -#define I2C_2_INT 50 -#define PLL1_LOCK_INT 49 -#define PLL2_LOCK_INT 48 -#define PLL3_LOCK_INT 47 -#define PLL4_LOCK_INT 46 -#define PLL5_LOCK_INT 45 -#define SPI2_INT 44 -#define DSP_INT1 43 -#define DSP_INT2 42 -#define DSP_TDM_INT2 41 -#define TS_AUX_INT 40 -#define TS_IRQ 39 -#define TS_P_INT 38 -#define UOUT1_TO_PAD_INT 37 -#define GPI_11_INT 36 -#define DSP_INT4 35 -#define JTAG_COMM_RX_INT 34 -#define JTAG_COMM_TX_INT 33 -#define DSP_INT3 32 - -/*Manual: table 257, page 197*/ - -/*MAIN Interrupt Routing*/ - -#define MAIN_BASE_INT 0 - -#define SUB2_FIQ_N 31 /*active low */ -#define SUB1_FIQ_N 30 /*active low */ -#define JPEG_INT 29 -#define DMA_INT 28 -#define MSTIMER_INT 27 -#define IIR1_INT 26 -#define IIR2_INT 25 -#define IIR7_INT 24 -#define DSP_TDM_INT0 23 -#define DSP_TDM_INT1 22 -#define DSP_P_INT 21 -#define DSP_INT0 20 -#define DUM_INT 19 -#define UOUT0_TO_PAD_INT 18 -#define MP4_ENC_INT 17 -#define MP4_DEC_INT 16 -#define SD0_INT 15 -#define MBX_INT 14 -#define SD1_INT 13 -#define MS_INT_N 12 -#define FLASH_INT 11 /*NAND*/ -#define IIR6_INT 10 -#define IIR5_INT 9 -#define IIR4_INT 8 -#define IIR3_INT 7 -#define WATCH_INT 6 -#define HSTIMER_INT 5 -#define ARCH_TIMER_IRQ HSTIMER_INT -#define CAM_INT 4 -#define PRNG_INT 3 -#define CRYPTO_INT 2 -#define SUB2_IRQ_N 1 /*active low */ -#define SUB1_IRQ_N 0 /*active low */ - -#define PNX4008_IRQ_TYPES \ -{ /*IRQ #'s: */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ -} - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 - -#endif /* __PNX4008_IRQS_h__ */ diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h deleted file mode 100644 index 6ea02f2176b7..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/param.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define HZ 100 diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h deleted file mode 100644 index 368c2c10a308..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/platform.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/platform.h - * - * PNX4008 Base addresses - header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ - -#define PNX4008_IRAM_BASE 0x08000000 -#define PNX4008_IRAM_SIZE 0x00010000 -#define PNX4008_YUV_SLAVE_BASE 0x10000000 -#define PNX4008_DUM_SLAVE_BASE 0x18000000 -#define PNX4008_NDF_FLASH_BASE 0x20020000 -#define PNX4008_SPI1_BASE 0x20088000 -#define PNX4008_SPI2_BASE 0x20090000 -#define PNX4008_SD_CONFIG_BASE 0x20098000 -#define PNX4008_FLASH_DATA 0x200B0000 -#define PNX4008_MLC_FLASH_BASE 0x200B8000 -#define PNX4008_JPEG_CONFIG_BASE 0x300A0000 -#define PNX4008_DMA_CONFIG_BASE 0x31000000 -#define PNX4008_USB_CONFIG_BASE 0x31020000 -#define PNX4008_SDRAM_CFG_BASE 0x31080000 -#define PNX4008_AHB2FAB_BASE 0x40000000 -#define PNX4008_PWRMAN_BASE 0x40004000 -#define PNX4008_INTCTRLMIC_BASE 0x40008000 -#define PNX4008_INTCTRLSIC1_BASE 0x4000C000 -#define PNX4008_INTCTRLSIC2_BASE 0x40010000 -#define PNX4008_HSUART1_BASE 0x40014000 -#define PNX4008_HSUART2_BASE 0x40018000 -#define PNX4008_HSUART7_BASE 0x4001C000 -#define PNX4008_RTC_BASE 0x40024000 -#define PNX4008_PIO_BASE 0x40028000 -#define PNX4008_MSTIMER_BASE 0x40034000 -#define PNX4008_HSTIMER_BASE 0x40038000 -#define PNX4008_WDOG_BASE 0x4003C000 -#define PNX4008_DEBUG_BASE 0x40040000 -#define PNX4008_TOUCH1_BASE 0x40048000 -#define PNX4008_KEYSCAN_BASE 0x40050000 -#define PNX4008_UARTCTRL_BASE 0x40054000 -#define PNX4008_PWM_BASE 0x4005C000 -#define PNX4008_UART3_BASE 0x40080000 -#define PNX4008_UART4_BASE 0x40088000 -#define PNX4008_UART5_BASE 0x40090000 -#define PNX4008_UART6_BASE 0x40098000 -#define PNX4008_I2C1_BASE 0x400A0000 -#define PNX4008_I2C2_BASE 0x400A8000 -#define PNX4008_MAGICGATE_BASE 0x400B0000 -#define PNX4008_DUMCONF_BASE 0x400B8000 -#define PNX4008_DUM_MAINCFG_BASE 0x400BC000 -#define PNX4008_DSP_BASE 0x400C0000 -#define PNX4008_PROFCOUNTER_BASE 0x400C8000 -#define PNX4008_CRYPTO_BASE 0x400D0000 -#define PNX4008_CAMIFCONF_BASE 0x400D8000 -#define PNX4008_YUV2RGB_BASE 0x400E0000 -#define PNX4008_AUDIOCONFIG_BASE 0x400E8000 - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h deleted file mode 100644 index 2fa685bff858..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/pm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/pm.h - * - * PNX4008 Power Management Routiness - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_PNX4008_PM_H -#define __ASM_ARCH_PNX4008_PM_H - -#ifndef __ASSEMBLER__ -#include "irq.h" -#include "irqs.h" -#include "clock.h" - -extern void pnx4008_pm_idle(void); -extern void pnx4008_pm_suspend(void); -extern unsigned int pnx4008_cpu_suspend_sz; -extern void pnx4008_cpu_suspend(void); -extern unsigned int pnx4008_cpu_standby_sz; -extern void pnx4008_cpu_standby(void); - -extern int pnx4008_startup_pll(struct clk *); -extern int pnx4008_shutdown_pll(struct clk *); - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h deleted file mode 100644 index b383c7de7ab4..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PNX4008_TIMEX_H -#define __PNX4008_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h deleted file mode 100644 index bb4751ee2539..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2006 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART5_BASE 0x40090000 - -#define UART5_DR (*(volatile unsigned char *) (UART5_BASE)) -#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18)) - -static __inline__ void putc(char c) -{ - while (UART5_FR & (1 << 5)) - barrier(); - - UART5_DR = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c deleted file mode 100644 index 41e4201972d5..000000000000 --- a/arch/arm/mach-pnx4008/irq.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/arm/mach-pnx4008/irq.c - * - * PNX4008 IRQ controller driver - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <mach/irq.h> - -static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES; - -static void pnx4008_mask_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */ -} - -static void pnx4008_unmask_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq)); /* unmask interrupt */ -} - -static void pnx4008_mask_ack_irq(struct irq_data *d) -{ - __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */ - __raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq)); /* clear interrupt status */ -} - -static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type) -{ - switch (type) { - case IRQ_TYPE_EDGE_RISING: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /*rising edge */ - irq_set_handler(d->irq, handle_edge_irq); - break; - case IRQ_TYPE_EDGE_FALLING: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*falling edge */ - irq_set_handler(d->irq, handle_edge_irq); - break; - case IRQ_TYPE_LEVEL_LOW: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*low level */ - irq_set_handler(d->irq, handle_level_irq); - break; - case IRQ_TYPE_LEVEL_HIGH: - __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */ - __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /* high level */ - irq_set_handler(d->irq, handle_level_irq); - break; - - /* IRQ_TYPE_EDGE_BOTH is not supported */ - default: - printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); - return -1; - } - return 0; -} - -static struct irq_chip pnx4008_irq_chip = { - .irq_ack = pnx4008_mask_ack_irq, - .irq_mask = pnx4008_mask_irq, - .irq_unmask = pnx4008_unmask_irq, - .irq_set_type = pnx4008_set_irq_type, -}; - -void __init pnx4008_init_irq(void) -{ - unsigned int i; - - /* configure IRQ's */ - for (i = 0; i < NR_IRQS; i++) { - set_irq_flags(i, IRQF_VALID); - irq_set_chip(i, &pnx4008_irq_chip); - pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]); - } - - /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */ - pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N), - pnx4008_irq_type[SUB1_IRQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N), - pnx4008_irq_type[SUB2_IRQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N), - pnx4008_irq_type[SUB1_FIQ_N]); - pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N), - pnx4008_irq_type[SUB2_FIQ_N]); - - /* mask all others */ - __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) | - (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N), - INTC_ER(MAIN_BASE_INT)); - __raw_writel(0, INTC_ER(SIC1_BASE_INT)); - __raw_writel(0, INTC_ER(SIC2_BASE_INT)); -} - diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c deleted file mode 100644 index 26f8d06b142a..000000000000 --- a/arch/arm/mach-pnx4008/pm.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/arm/mach-pnx4008/pm.c - * - * Power Management driver for PNX4008 - * - * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/pm.h> -#include <linux/rtc.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/suspend.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <asm/cacheflush.h> - -#include <mach/hardware.h> -#include <mach/pm.h> -#include <mach/clock.h> - -#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE) - -static void *saved_sram; - -static struct clk *pll4_clk; - -static inline void pnx4008_standby(void) -{ - void (*pnx4008_cpu_standby_ptr) (void); - - local_irq_disable(); - local_fiq_disable(); - - clk_disable(pll4_clk); - - /*saving portion of SRAM to be used by suspend function. */ - memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz); - - /*make sure SRAM copy gets physically written into SDRAM. - SDRAM will be placed into self-refresh during power down */ - flush_cache_all(); - - /*copy suspend function into SRAM */ - memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz); - - /*do suspend */ - pnx4008_cpu_standby_ptr = (void *)SRAM_VA; - pnx4008_cpu_standby_ptr(); - - /*restoring portion of SRAM that was used by suspend function */ - memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz); - - clk_enable(pll4_clk); - - local_fiq_enable(); - local_irq_enable(); -} - -static inline void pnx4008_suspend(void) -{ - void (*pnx4008_cpu_suspend_ptr) (void); - - local_irq_disable(); - local_fiq_disable(); - - clk_disable(pll4_clk); - - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT)); - __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT)); - - /*saving portion of SRAM to be used by suspend function. */ - memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz); - - /*make sure SRAM copy gets physically written into SDRAM. - SDRAM will be placed into self-refresh during power down */ - flush_cache_all(); - - /*copy suspend function into SRAM */ - memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz); - - /*do suspend */ - pnx4008_cpu_suspend_ptr = (void *)SRAM_VA; - pnx4008_cpu_suspend_ptr(); - - /*restoring portion of SRAM that was used by suspend function */ - memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz); - - clk_enable(pll4_clk); - - local_fiq_enable(); - local_irq_enable(); -} - -static int pnx4008_pm_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_STANDBY: - pnx4008_standby(); - break; - case PM_SUSPEND_MEM: - pnx4008_suspend(); - break; - } - return 0; -} - -static int pnx4008_pm_valid(suspend_state_t state) -{ - return (state == PM_SUSPEND_STANDBY) || - (state == PM_SUSPEND_MEM); -} - -static const struct platform_suspend_ops pnx4008_pm_ops = { - .enter = pnx4008_pm_enter, - .valid = pnx4008_pm_valid, -}; - -int __init pnx4008_pm_init(void) -{ - u32 sram_size_to_allocate; - - pll4_clk = clk_get(0, "ck_pll4"); - if (IS_ERR(pll4_clk)) { - printk(KERN_ERR - "PM Suspend cannot acquire ARM(PLL4) clock control\n"); - return PTR_ERR(pll4_clk); - } - - if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz) - sram_size_to_allocate = pnx4008_cpu_standby_sz; - else - sram_size_to_allocate = pnx4008_cpu_suspend_sz; - - saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC); - if (!saved_sram) { - printk(KERN_ERR - "PM Suspend: cannot allocate memory to save portion of SRAM\n"); - clk_put(pll4_clk); - return -ENOMEM; - } - - suspend_set_ops(&pnx4008_pm_ops); - return 0; -} diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c deleted file mode 100644 index 374c138ac1ac..000000000000 --- a/arch/arm/mach-pnx4008/serial.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/serial.c - * - * PNX4008 UART initialization - * - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> - -#include <mach/platform.h> -#include <mach/hardware.h> - -#include <linux/serial_core.h> -#include <linux/serial_reg.h> - -#include <mach/gpio-pnx4008.h> -#include <mach/clock.h> - -#define UART_3 0 -#define UART_4 1 -#define UART_5 2 -#define UART_6 3 -#define UART_UNKNOWN (-1) - -#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE) -#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE) -#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE) -#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE) - -#define UART_FCR_OFFSET 8 -#define UART_FIFO_SIZE 64 - -void pnx4008_uart_init(void) -{ - u32 tmp; - int i = UART_FIFO_SIZE; - - __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET); - __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET); - - /* Send a NULL to fix the UART HW bug */ - __raw_writel(0x00, UART5_BASE_VA); - __raw_writel(0x00, UART3_BASE_VA); - - while (i--) { - tmp = __raw_readl(UART5_BASE_VA); - tmp = __raw_readl(UART3_BASE_VA); - } - __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET); - __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET); - - /* setup wakeup interrupt */ - start_int_set_rising_edge(SE_U3_RX_INT); - start_int_ack(SE_U3_RX_INT); - start_int_umask(SE_U3_RX_INT); - - start_int_set_rising_edge(SE_U5_RX_INT); - start_int_ack(SE_U5_RX_INT); - start_int_umask(SE_U5_RX_INT); -} - diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S deleted file mode 100644 index f4eed495d295..000000000000 --- a/arch/arm/mach-pnx4008/sleep.S +++ /dev/null @@ -1,195 +0,0 @@ -/* - * linux/arch/arm/mach-pnx4008/sleep.S - * - * PNX4008 support for STOP mode and SDRAM self-refresh - * - * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <mach/hardware.h> - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define PWR_CTRL_REG_OFFS 0x44 - -#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE) -#define MPMC_STATUS_REG_OFFS 0x4 - - .text - -ENTRY(pnx4008_cpu_suspend) - @this function should be entered in Direct run mode. - - @ save registers on stack - stmfd sp!, {r0 - r6, lr} - - @ setup Power Manager base address in r4 - @ and put it's value in r5 - mov r4, #(PWRMAN_VA_BASE & 0xff000000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00) - orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff) - ldr r5, [r4, #PWR_CTRL_REG_OFFS] - - @ setup SDRAM controller base address in r2 - @ and put it's value in r3 - mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff) - ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do save current bit settings in r1 - mov r1, r5 - - @ set SDRAM self-refresh bit - orr r5, r5, #(1 << 9) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get into self-refresh mode -2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #(1 << 2) - beq 2b - - @ to prepare SDRAM to get out of self-refresh mode after wakeup - orr r5, r5, #(1 << 7) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do enter stop mode - orr r5, r5, #(1 << 0) - str r5, [r4, #PWR_CTRL_REG_OFFS] - nop - nop - nop - nop - nop - nop - nop - nop - nop - - @ sleeping now... - - @ coming out of STOP mode into Direct Run mode - @ clear STOP mode and SDRAM self-refresh bits - str r1, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get out self-refresh mode -3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #5 - bne 3b - - @ restore regs and return - ldmfd sp!, {r0 - r6, pc} - -ENTRY(pnx4008_cpu_suspend_sz) - .word . - pnx4008_cpu_suspend - -ENTRY(pnx4008_cpu_standby) - @ save registers on stack - stmfd sp!, {r0 - r6, lr} - - @ setup Power Manager base address in r4 - @ and put it's value in r5 - mov r4, #(PWRMAN_VA_BASE & 0xff000000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000) - orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00) - orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff) - ldr r5, [r4, #PWR_CTRL_REG_OFFS] - - @ setup SDRAM controller base address in r2 - @ and put it's value in r3 - mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00) - orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff) - ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ do save current bit settings in r1 - mov r1, r5 - - @ set SDRAM self-refresh bit - orr r5, r5, #(1 << 9) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit - and r5, r5, #(~(1 << 9)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get into self-refresh mode -2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #(1 << 2) - beq 2b - - @ set 'get out of self-refresh mode after wakeup' bit - orr r5, r5, #(1 << 7) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now... - - @ set SDRAM self-refresh bit latch - orr r5, r5, #(1 << 8) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ clear SDRAM self-refresh bit latch - and r5, r5, #(~(1 << 8)) - str r5, [r4, #PWR_CTRL_REG_OFFS] - - @ wait for SDRAM to get out self-refresh mode -3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS] - tst r3, #5 - bne 3b - - @ restore regs and return - ldmfd sp!, {r0 - r6, pc} - -ENTRY(pnx4008_cpu_standby_sz) - .word . - pnx4008_cpu_standby - -ENTRY(pnx4008_cache_clean_invalidate) - stmfd sp!, {r0 - r6, lr} -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache -#else -1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate - bne 1b -#endif - ldmfd sp!, {r0 - r6, pc} diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c deleted file mode 100644 index 0cfe8af3d3be..000000000000 --- a/arch/arm/mach-pnx4008/time.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * arch/arm/mach-pnx4008/time.c - * - * PNX4008 Timers - * - * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/kallsyms.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/leds.h> -#include <asm/mach/time.h> -#include <asm/errno.h> - -#include "time.h" - -/*! Note: all timers are UPCOUNTING */ - -/*! - * Returns number of us since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long pnx4008_gettimeoffset(void) -{ - u32 ticks_to_match = - __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER); - u32 elapsed = LATCH - ticks_to_match; - return (elapsed * (tick_nsec / 1000)) / LATCH; -} - -/*! - * IRQ handler for the timer - */ -static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) -{ - if (__raw_readl(HSTIM_INT) & MATCH0_INT) { - - do { - timer_tick(); - - /* - * this algorithm takes care of possible delay - * for this interrupt handling longer than a normal - * timer period - */ - __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH, - HSTIM_MATCH0); - __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */ - - /* - * The goal is to keep incrementing HSTIM_MATCH0 - * register until HSTIM_MATCH0 indicates time after - * what HSTIM_COUNTER indicates. - */ - } while ((signed) - (__raw_readl(HSTIM_MATCH0) - - __raw_readl(HSTIM_COUNTER)) < 0); - } - - return IRQ_HANDLED; -} - -static struct irqaction pnx4008_timer_irq = { - .name = "PNX4008 Tick Timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pnx4008_timer_interrupt -}; - -/*! - * Set up timer and timer interrupt. - */ -static __init void pnx4008_setup_timer(void) -{ - __raw_writel(RESET_COUNT, MSTIM_CTRL); - while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */ - __raw_writel(0, MSTIM_CTRL); /* stop the timer */ - __raw_writel(0, MSTIM_MCTRL); - - __raw_writel(RESET_COUNT, HSTIM_CTRL); - while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */ - __raw_writel(0, HSTIM_CTRL); - __raw_writel(0, HSTIM_MCTRL); - __raw_writel(0, HSTIM_CCR); - __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */ - __raw_writel(LATCH, HSTIM_MATCH0); - __raw_writel(MR0_INT, HSTIM_MCTRL); - - setup_irq(HSTIMER_INT, &pnx4008_timer_irq); - - __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */ -} - -/* Timer Clock Control in PM register */ -#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC)) -#define WATCHDOG_CLK_EN 1 -#define TIMER_CLK_EN 2 /* HS and MS timers? */ - -static u32 timclk_ctrl_reg_save; - -void pnx4008_timer_suspend(void) -{ - timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG); - __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */ -} - -void pnx4008_timer_resume(void) -{ - __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */ -} - -struct sys_timer pnx4008_timer = { - .init = pnx4008_setup_timer, - .offset = pnx4008_gettimeoffset, - .suspend = pnx4008_timer_suspend, - .resume = pnx4008_timer_resume, -}; - diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h deleted file mode 100644 index 75e88c570aa7..000000000000 --- a/arch/arm/mach-pnx4008/time.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev <source@mvista.com> - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef PNX_TIME_H -#define PNX_TIME_H - -#include <linux/io.h> -#include <mach/hardware.h> - -#define TICKS2USECS(x) (x) - -/* MilliSecond Timer - Chapter 21 Page 202 */ - -#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) -#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) -#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) -#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) -#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) -#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) - -/* High Speed Timer - Chpater 22, Page 205 */ - -#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) -#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) -#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) -#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) -#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) -#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) -#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) -#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) -#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) -#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) -#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) -#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) - -/* IMPORTANT: both timers are UPCOUNTING */ - -/* xSTIM_MCTRL bit definitions */ -#define MR0_INT 1 -#define RESET_COUNT0 (1<<1) -#define STOP_COUNT0 (1<<2) -#define MR1_INT (1<<3) -#define RESET_COUNT1 (1<<4) -#define STOP_COUNT1 (1<<5) -#define MR2_INT (1<<6) -#define RESET_COUNT2 (1<<7) -#define STOP_COUNT2 (1<<8) - -/* xSTIM_CTRL bit definitions */ -#define COUNT_ENAB 1 -#define RESET_COUNT (1<<1) -#define DEBUG_EN (1<<2) - -/* xSTIM_INT bit definitions */ -#define MATCH0_INT 1 -#define MATCH1_INT (1<<1) -#define MATCH2_INT (1<<2) -#define RTC_TICK0 (1<<4) -#define RTC_TICK1 (1<<5) - -#endif diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig new file mode 100644 index 000000000000..41fc85327673 --- /dev/null +++ b/arch/arm/mach-prima2/Kconfig @@ -0,0 +1,19 @@ +if ARCH_SIRF + +menu "CSR SiRF primaII/Marco/Polo Specific Features" + +config ARCH_PRIMA2 + bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" + default y + select CPU_V7 + select ZONE_DMA + select SIRF_IRQ + help + Support for CSR SiRFSoC ARM Cortex A9 Platform + +endmenu + +config SIRF_IRQ + bool + +endif diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 13dd1604d951..fc9ce22e2b5a 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -1,9 +1,8 @@ obj-y := timer.o -obj-y += irq.o -obj-y += clock.o obj-y += rstc.o -obj-y += prima2.o +obj-y += common.o obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o +obj-$(CONFIG_SIRF_IRQ) += irq.o diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c deleted file mode 100644 index aebad7e565cf..000000000000 --- a/arch/arm/mach-prima2/clock.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * Clock tree for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/module.h> -#include <linux/bitops.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <asm/mach/map.h> -#include <mach/map.h> - -#define SIRFSOC_CLKC_CLK_EN0 0x0000 -#define SIRFSOC_CLKC_CLK_EN1 0x0004 -#define SIRFSOC_CLKC_REF_CFG 0x0014 -#define SIRFSOC_CLKC_CPU_CFG 0x0018 -#define SIRFSOC_CLKC_MEM_CFG 0x001c -#define SIRFSOC_CLKC_SYS_CFG 0x0020 -#define SIRFSOC_CLKC_IO_CFG 0x0024 -#define SIRFSOC_CLKC_DSP_CFG 0x0028 -#define SIRFSOC_CLKC_GFX_CFG 0x002c -#define SIRFSOC_CLKC_MM_CFG 0x0030 -#define SIRFSOC_LKC_LCD_CFG 0x0034 -#define SIRFSOC_CLKC_MMC_CFG 0x0038 -#define SIRFSOC_CLKC_PLL1_CFG0 0x0040 -#define SIRFSOC_CLKC_PLL2_CFG0 0x0044 -#define SIRFSOC_CLKC_PLL3_CFG0 0x0048 -#define SIRFSOC_CLKC_PLL1_CFG1 0x004c -#define SIRFSOC_CLKC_PLL2_CFG1 0x0050 -#define SIRFSOC_CLKC_PLL3_CFG1 0x0054 -#define SIRFSOC_CLKC_PLL1_CFG2 0x0058 -#define SIRFSOC_CLKC_PLL2_CFG2 0x005c -#define SIRFSOC_CLKC_PLL3_CFG2 0x0060 - -#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000) - -#define KHZ 1000 -#define MHZ (KHZ * KHZ) - -struct clk_ops { - unsigned long (*get_rate)(struct clk *clk); - long (*round_rate)(struct clk *clk, unsigned long rate); - int (*set_rate)(struct clk *clk, unsigned long rate); - int (*enable)(struct clk *clk); - int (*disable)(struct clk *clk); - struct clk *(*get_parent)(struct clk *clk); - int (*set_parent)(struct clk *clk, struct clk *parent); -}; - -struct clk { - struct clk *parent; /* parent clk */ - unsigned long rate; /* clock rate in Hz */ - signed char usage; /* clock enable count */ - signed char enable_bit; /* enable bit: 0 ~ 63 */ - unsigned short regofs; /* register offset */ - struct clk_ops *ops; /* clock operation */ -}; - -static DEFINE_SPINLOCK(clocks_lock); - -static inline unsigned long clkc_readl(unsigned reg) -{ - return readl(SIRFSOC_CLOCK_VA_BASE + reg); -} - -static inline void clkc_writel(u32 val, unsigned reg) -{ - writel(val, SIRFSOC_CLOCK_VA_BASE + reg); -} - -/* - * osc_rtc - real time oscillator - 32.768KHz - * osc_sys - high speed oscillator - 26MHz - */ - -static struct clk clk_rtc = { - .rate = 32768, -}; - -static struct clk clk_osc = { - .rate = 26 * MHZ, -}; - -/* - * std pll - */ -static unsigned long std_pll_get_rate(struct clk *clk) -{ - unsigned long fin = clk_get_rate(clk->parent); - u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - - SIRFSOC_CLKC_PLL1_CFG0; - - if (clkc_readl(regcfg2) & BIT(2)) { - /* pll bypass mode */ - clk->rate = fin; - } else { - /* fout = fin * nf / nr / od */ - u32 cfg0 = clkc_readl(clk->regofs); - u32 nf = (cfg0 & (BIT(13) - 1)) + 1; - u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1; - u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1; - WARN_ON(fin % MHZ); - clk->rate = fin / MHZ * nf / nr / od * MHZ; - } - - return clk->rate; -} - -static int std_pll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long fin, nf, nr, od, reg; - - /* - * fout = fin * nf / (nr * od); - * set od = 1, nr = fin/MHz, so fout = nf * MHz - */ - - nf = rate / MHZ; - if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1)) - return -EINVAL; - - fin = clk_get_rate(clk->parent); - BUG_ON(fin < MHZ); - - nr = fin / MHZ; - BUG_ON((fin % MHZ) || nr > BIT(6)); - - od = 1; - - reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19); - clkc_writel(reg, clk->regofs); - - reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0; - clkc_writel((nf >> 1) - 1, reg); - - reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0; - while (!(clkc_readl(reg) & BIT(6))) - cpu_relax(); - - clk->rate = 0; /* set to zero will force recalculation */ - return 0; -} - -static struct clk_ops std_pll_ops = { - .get_rate = std_pll_get_rate, - .set_rate = std_pll_set_rate, -}; - -static struct clk clk_pll1 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL1_CFG0, - .ops = &std_pll_ops, -}; - -static struct clk clk_pll2 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL2_CFG0, - .ops = &std_pll_ops, -}; - -static struct clk clk_pll3 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL3_CFG0, - .ops = &std_pll_ops, -}; - -/* - * clock domains - cpu, mem, sys/io - */ - -static struct clk clk_mem; - -static struct clk *dmn_get_parent(struct clk *clk) -{ - struct clk *clks[] = { - &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 - }; - u32 cfg = clkc_readl(clk->regofs); - WARN_ON((cfg & (BIT(3) - 1)) > 4); - return clks[cfg & (BIT(3) - 1)]; -} - -static int dmn_set_parent(struct clk *clk, struct clk *parent) -{ - const struct clk *clks[] = { - &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 - }; - u32 cfg = clkc_readl(clk->regofs); - int i; - for (i = 0; i < ARRAY_SIZE(clks); i++) { - if (clks[i] == parent) { - cfg &= ~(BIT(3) - 1); - clkc_writel(cfg | i, clk->regofs); - /* BIT(3) - switching status: 1 - busy, 0 - done */ - while (clkc_readl(clk->regofs) & BIT(3)) - cpu_relax(); - return 0; - } - } - return -EINVAL; -} - -static unsigned long dmn_get_rate(struct clk *clk) -{ - unsigned long fin = clk_get_rate(clk->parent); - u32 cfg = clkc_readl(clk->regofs); - if (cfg & BIT(24)) { - /* fcd bypass mode */ - clk->rate = fin; - } else { - /* - * wait count: bit[19:16], hold count: bit[23:20] - */ - u32 wait = (cfg >> 16) & (BIT(4) - 1); - u32 hold = (cfg >> 20) & (BIT(4) - 1); - - clk->rate = fin / (wait + hold + 2); - } - - return clk->rate; -} - -static int dmn_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long fin; - unsigned ratio, wait, hold, reg; - unsigned bits = (clk == &clk_mem) ? 3 : 4; - - fin = clk_get_rate(clk->parent); - ratio = fin / rate; - - if (unlikely(ratio < 2 || ratio > BIT(bits + 1))) - return -EINVAL; - - WARN_ON(fin % rate); - - wait = (ratio >> 1) - 1; - hold = ratio - wait - 2; - - reg = clkc_readl(clk->regofs); - reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20)); - reg |= (wait << 16) | (hold << 20) | BIT(25); - clkc_writel(reg, clk->regofs); - - /* waiting FCD been effective */ - while (clkc_readl(clk->regofs) & BIT(25)) - cpu_relax(); - - clk->rate = 0; /* set to zero will force recalculation */ - - return 0; -} - -/* - * cpu clock has no FCD register in Prima2, can only change pll - */ -static int cpu_set_rate(struct clk *clk, unsigned long rate) -{ - int ret1, ret2; - struct clk *cur_parent, *tmp_parent; - - cur_parent = dmn_get_parent(clk); - BUG_ON(cur_parent == NULL || cur_parent->usage > 1); - - /* switch to tmp pll before setting parent clock's rate */ - tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1; - ret1 = dmn_set_parent(clk, tmp_parent); - BUG_ON(ret1); - - ret2 = clk_set_rate(cur_parent, rate); - - ret1 = dmn_set_parent(clk, cur_parent); - - clk->rate = 0; /* set to zero will force recalculation */ - - return ret2 ? ret2 : ret1; -} - -static struct clk_ops cpu_ops = { - .get_parent = dmn_get_parent, - .set_parent = dmn_set_parent, - .set_rate = cpu_set_rate, -}; - -static struct clk clk_cpu = { - .parent = &clk_pll1, - .regofs = SIRFSOC_CLKC_CPU_CFG, - .ops = &cpu_ops, -}; - - -static struct clk_ops msi_ops = { - .set_rate = dmn_set_rate, - .get_rate = dmn_get_rate, - .set_parent = dmn_set_parent, - .get_parent = dmn_get_parent, -}; - -static struct clk clk_mem = { - .parent = &clk_pll2, - .regofs = SIRFSOC_CLKC_MEM_CFG, - .ops = &msi_ops, -}; - -static struct clk clk_sys = { - .parent = &clk_pll3, - .regofs = SIRFSOC_CLKC_SYS_CFG, - .ops = &msi_ops, -}; - -static struct clk clk_io = { - .parent = &clk_pll3, - .regofs = SIRFSOC_CLKC_IO_CFG, - .ops = &msi_ops, -}; - -/* - * on-chip clock sets - */ -static struct clk_lookup onchip_clks[] = { - { - .dev_id = "rtc", - .clk = &clk_rtc, - }, { - .dev_id = "osc", - .clk = &clk_osc, - }, { - .dev_id = "pll1", - .clk = &clk_pll1, - }, { - .dev_id = "pll2", - .clk = &clk_pll2, - }, { - .dev_id = "pll3", - .clk = &clk_pll3, - }, { - .dev_id = "cpu", - .clk = &clk_cpu, - }, { - .dev_id = "mem", - .clk = &clk_mem, - }, { - .dev_id = "sys", - .clk = &clk_sys, - }, { - .dev_id = "io", - .clk = &clk_io, - }, -}; - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (clk->parent) - clk_enable(clk->parent); - - spin_lock_irqsave(&clocks_lock, flags); - if (!clk->usage++ && clk->ops && clk->ops->enable) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return; - - WARN_ON(!clk->usage); - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->usage == 0 && clk->ops && clk->ops->disable) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - - if (clk->parent) - clk_disable(clk->parent); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return 0; - - if (clk->rate) - return clk->rate; - - if (clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return 0; - - if (clk->ops && clk->ops->round_rate) - return clk->ops->round_rate(clk, rate); - - return 0; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (!clk->ops || !clk->ops->set_rate) - return -EINVAL; - - return clk->ops->set_rate(clk, rate); -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret; - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (!clk->ops || !clk->ops->set_parent) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->ops->set_parent(clk, parent); - if (!ret) { - parent->usage += clk->usage; - clk->parent->usage -= clk->usage; - BUG_ON(clk->parent->usage < 0); - clk->parent = parent; - } - spin_unlock_irqrestore(&clocks_lock, flags); - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return NULL; - - if (!clk->ops || !clk->ops->get_parent) - return clk->parent; - - spin_lock_irqsave(&clocks_lock, flags); - clk->parent = clk->ops->get_parent(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static void __init sirfsoc_clk_init(void) -{ - clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks)); -} - -static struct of_device_id clkc_ids[] = { - { .compatible = "sirf,prima2-clkc" }, - {}, -}; - -void __init sirfsoc_of_clk_init(void) -{ - struct device_node *np; - struct resource res; - struct map_desc sirfsoc_clkc_iodesc = { - .virtual = SIRFSOC_CLOCK_VA_BASE, - .type = MT_DEVICE, - }; - - np = of_find_matching_node(NULL, clkc_ids); - if (!np) - panic("unable to find compatible clkc node in dtb\n"); - - if (of_address_to_resource(np, 0, &res)) - panic("unable to find clkc range in dtb"); - of_node_put(np); - - sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start); - sirfsoc_clkc_iodesc.length = 1 + res.end - res.start; - - iotable_init(&sirfsoc_clkc_iodesc, 1); - - sirfsoc_clk_init(); -} diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/common.c index 8f0429d4b79f..f25a54194639 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/common.c @@ -30,21 +30,21 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } -static const char *prima2cb_dt_match[] __initdata = { - "sirf,prima2-cb", +#ifdef CONFIG_ARCH_PRIMA2 +static const char *prima2_dt_match[] __initdata = { + "sirf,prima2", NULL }; -MACHINE_START(PRIMA2_EVB, "prima2cb") +DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .atag_offset = 0x100, - .init_early = sirfsoc_of_clk_init, .map_io = sirfsoc_map_lluart, .init_irq = sirfsoc_of_irq_init, .timer = &sirfsoc_timer, .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, - .dt_compat = prima2cb_dt_match, + .dt_compat = prima2_dt_match, .restart = sirfsoc_restart, MACHINE_END +#endif diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index a7b9415d30f8..7dee9176e77a 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -63,7 +63,7 @@ void __init sirfsoc_of_irq_init(void) np = of_find_matching_node(NULL, intc_ids); if (!np) - panic("unable to find compatible intc node in dtb\n"); + return; sirfsoc_intc_base = of_iomap(np, 0); if (!sirfsoc_intc_base) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index f224107de7bc..d95bf252f694 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -21,6 +21,8 @@ #include <asm/sched_clock.h> #include <asm/mach/time.h> +#include "common.h" + #define SIRFSOC_TIMER_COUNTER_LO 0x0000 #define SIRFSOC_TIMER_COUNTER_HI 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0008 @@ -188,9 +190,13 @@ static void __init sirfsoc_clockevent_init(void) static void __init sirfsoc_timer_init(void) { unsigned long rate; + struct clk *clk; + + /* initialize clocking early, we want to set the OS timer */ + sirfsoc_of_clk_init(); /* timer's input clock is io clock */ - struct clk *clk = clk_get_sys("io", NULL); + clk = clk_get_sys("io", NULL); BUG_ON(IS_ERR(clk)); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 166eee5b8a70..c1f3b1279d97 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -6,7 +6,6 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/i2c/pxa-i2c.h> -#include <asm/pmu.h> #include <mach/udc.h> #include <mach/pxa3xx-u2d.h> #include <mach/pxafb.h> @@ -42,7 +41,7 @@ static struct resource pxa_resource_pmu = { struct platform_device pxa_device_pmu = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .resource = &pxa_resource_pmu, .num_resources = 1, }; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index baf382c5e776..d7a6e9cebba4 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,7 +32,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -297,7 +296,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index b1d7cafa1a6d..361f898884c8 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -34,7 +34,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -280,7 +279,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = 1, .resource = &pmu_resource, }; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index a98c536e3327..c56bc8d4d11b 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,7 +32,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -263,7 +262,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 59650174e6ed..040937582453 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -31,7 +31,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> @@ -241,7 +240,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = 1, .resource = &pmu_resource, }; diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 3f2f605624e9..97885dc11e8c 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -30,7 +30,6 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/pmu.h> #include <asm/smp_twd.h> #include <asm/pgtable.h> #include <asm/hardware/gic.h> @@ -280,7 +279,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 2704bcd869cd..d35b94ef73b7 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -21,9 +21,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#define IO_BASE 0xe0000000 -#define IO_SIZE 0x08000000 -#define IO_START 0x40000000 #define ROMCARD_SIZE 0x08000000 #define ROMCARD_START 0x10000000 @@ -104,20 +101,6 @@ arch_initcall(shark_init); extern void shark_init_irq(void); -static struct map_desc shark_io_desc[] __initdata = { - { - .virtual = IO_BASE, - .pfn = __phys_to_pfn(IO_START), - .length = IO_SIZE, - .type = MT_DEVICE - } -}; - -static void __init shark_map_io(void) -{ - iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc)); -} - #define IRQ_TIMER 0 #define HZ_TIME ((1193180 + HZ/2) / HZ) @@ -158,7 +141,6 @@ static void shark_init_early(void) MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, - .map_io = shark_map_io, .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 20eb2bf2a42b..d129119a3f69 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -12,9 +12,10 @@ */ .macro addruart, rp, rv, tmp - mov \rp, #0xe0000000 - orr \rp, \rp, #0x000003f8 - mov \rv, \rp + mov \rp, #0x3f8 + orr \rv, \rp, #0xfe000000 + orr \rv, \rv, #0x00e00000 + orr \rp, \rp, #0x40000000 .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S index 5901b09fc96a..c9e49f049532 100644 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ b/arch/arm/mach-shark/include/mach/entry-macro.S @@ -8,7 +8,8 @@ * warranty of any kind, whether express or implied. */ .macro get_irqnr_preamble, base, tmp - mov \base, #0xe0000000 + mov \base, #0xfe000000 + orr \base, \base, #0x00e00000 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h deleted file mode 100644 index 1a45fc01ff1d..000000000000 --- a/arch/arm/mach-shark/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/io.h - * - * by Alexander Schulz - * - * derived from: - * arch/arm/mach-ebsa110/include/mach/io.h - * Copyright (C) 1997,1998 Russell King - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(0xe0000000 + (a))) - -#endif diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index 9089407d5326..b8b4ab323a3e 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -8,12 +8,15 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> +#include <linux/io.h> #include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define IO_START 0x40000000 + static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->bus->number == 0) @@ -44,6 +47,8 @@ static int __init shark_pci_init(void) pcibios_min_mem = 0x50000000; vga_base = 0xe8000000; + pci_ioremap_io(0, IO_START); + pci_common_init(&shark_pci); return 0; diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index d82c010fdfc6..cfc3b5c43ba8 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -40,7 +40,6 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d3e73eca630b..b3226f80c985 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -34,7 +34,6 @@ config ARCH_TEGRA_3x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB select USB_ULPI_VIEWPORT if USB_SUPPORT - select USE_OF select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index dc0fe389be56..643a37809a15 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -293,12 +293,12 @@ static apbio_write_fptr apbio_write; static u32 tegra_apb_readl_direct(unsigned long offset) { - return readl(IO_TO_VIRT(offset)); + return readl(IO_ADDRESS(offset)); } static void tegra_apb_writel_direct(u32 value, unsigned long offset) { - writel(value, IO_TO_VIRT(offset)); + writel(value, IO_ADDRESS(offset)); } void tegra_apb_io_init(void) diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index c70e65ffa36b..61e9603744a7 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -23,7 +23,6 @@ #include <linux/fsl_devices.h> #include <linux/serial_8250.h> #include <linux/i2c-tegra.h> -#include <asm/pmu.h> #include <mach/irqs.h> #include <mach/iomap.h> #include <mach/dma.h> @@ -516,7 +515,7 @@ static struct resource tegra_pmu_resources[] = { struct platform_device tegra_pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(tegra_pmu_resources), .resource = tegra_pmu_resources, }; diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index f946d129423c..0b7db174a5de 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -93,9 +93,9 @@ void tegra_init_fuse(void) { u32 id; - u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); + u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48)); reg |= 1 << 28; - writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); + writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48)); reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h deleted file mode 100644 index fe700f9ce7dc..000000000000 --- a/arch/arm/mach-tegra/include/mach/io.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/io.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_IO_H -#define __MACH_TEGRA_IO_H - -#define IO_SPACE_LIMIT 0xffff - -#ifndef __ASSEMBLER__ - -#ifdef CONFIG_TEGRA_PCI -extern void __iomem *tegra_pcie_io_base; - -static inline void __iomem *__io(unsigned long addr) -{ - return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT); -} -#else -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#endif - -#define __io(a) __io(a) - -#endif - -#endif diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 7e76da73121c..fee3a94c4549 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -303,6 +303,9 @@ #define IO_APB_VIRT IOMEM(0xFE300000) #define IO_APB_SIZE SZ_1M +#define TEGRA_PCIE_BASE 0x80000000 +#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M) + #define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst))) diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index d3ad5150d660..3463fb5b79c7 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -171,8 +171,6 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); * 0x90000000 - 0x9fffffff - non-prefetchable memory * 0xa0000000 - 0xbfffffff - prefetchable memory */ -#define TEGRA_PCIE_BASE 0x80000000 - #define PCIE_REGS_SZ SZ_16K #define PCIE_CFG_OFF PCIE_REGS_SZ #define PCIE_CFG_SZ SZ_1M @@ -180,8 +178,6 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); #define PCIE_EXT_CFG_SZ SZ_1M #define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ) -#define MMIO_BASE (TEGRA_PCIE_BASE + SZ_4M) -#define MMIO_SIZE SZ_64K #define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M) #define MEM_SIZE_0 SZ_128M #define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0) @@ -204,10 +200,9 @@ struct tegra_pcie_port { bool link_up; - char io_space_name[16]; char mem_space_name[16]; char prefetch_space_name[20]; - struct resource res[3]; + struct resource res[2]; }; struct tegra_pcie_info { @@ -223,17 +218,7 @@ struct tegra_pcie_info { struct clk *pll_e; }; -static struct tegra_pcie_info tegra_pcie = { - .res_mmio = { - .name = "PCI IO", - .start = MMIO_BASE, - .end = MMIO_BASE + MMIO_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -void __iomem *tegra_pcie_io_base; -EXPORT_SYMBOL(tegra_pcie_io_base); +static struct tegra_pcie_info tegra_pcie; static inline void afi_writel(u32 value, unsigned long offset) { @@ -391,24 +376,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) pp = tegra_pcie.port + nr; pp->root_bus_nr = sys->busnr; - /* - * IORESOURCE_IO - */ - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d I/O", pp->index); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - if (pp->index == 0) { - pp->res[0].start = PCIBIOS_MIN_IO; - pp->res[0].end = pp->res[0].start + SZ_32K - 1; - } else { - pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K; - pp->res[0].end = IO_SPACE_LIMIT; - } - pp->res[0].flags = IORESOURCE_IO; - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE); /* * IORESOURCE_MEM @@ -416,18 +384,18 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d MEM", pp->index); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; + pp->res[0].name = pp->mem_space_name; if (pp->index == 0) { - pp->res[1].start = MEM_BASE_0; - pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1; + pp->res[0].start = MEM_BASE_0; + pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1; } else { - pp->res[1].start = MEM_BASE_1; - pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1; + pp->res[0].start = MEM_BASE_1; + pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1; } - pp->res[1].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[1])) + pp->res[0].flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res[0])) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset); /* * IORESOURCE_MEM | IORESOURCE_PREFETCH @@ -435,18 +403,18 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name), "PCIe %d PREFETCH MEM", pp->index); pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0; - pp->res[2].name = pp->prefetch_space_name; + pp->res[1].name = pp->prefetch_space_name; if (pp->index == 0) { - pp->res[2].start = PREFETCH_MEM_BASE_0; - pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1; + pp->res[1].start = PREFETCH_MEM_BASE_0; + pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1; } else { - pp->res[2].start = PREFETCH_MEM_BASE_1; - pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1; + pp->res[1].start = PREFETCH_MEM_BASE_1; + pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1; } - pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - if (request_resource(&iomem_resource, &pp->res[2])) + pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + if (request_resource(&iomem_resource, &pp->res[1])) panic("Request PCIe Prefetch Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); return 1; } @@ -541,8 +509,8 @@ static void tegra_pcie_setup_translations(void) /* Bar 2: downstream IO bar */ fpci_bar = ((__u32)0xfdfc << 16); - size = MMIO_SIZE; - axi_address = MMIO_BASE; + size = SZ_128K; + axi_address = TEGRA_PCIE_IO_BASE; afi_writel(axi_address, AFI_AXI_BAR2_START); afi_writel(size >> 12, AFI_AXI_BAR2_SZ); afi_writel(fpci_bar, AFI_FPCI_BAR2); @@ -776,7 +744,6 @@ static void tegra_pcie_clocks_put(void) static int __init tegra_pcie_get_resources(void) { - struct resource *res_mmio = &tegra_pcie.res_mmio; int err; err = tegra_pcie_clocks_get(); @@ -798,34 +765,16 @@ static int __init tegra_pcie_get_resources(void) goto err_map_reg; } - err = request_resource(&iomem_resource, res_mmio); - if (err) { - pr_err("PCIE: Failed to request resources: %d\n", err); - goto err_req_io; - } - - tegra_pcie_io_base = ioremap_nocache(res_mmio->start, - resource_size(res_mmio)); - if (tegra_pcie_io_base == NULL) { - pr_err("PCIE: Failed to map IO\n"); - err = -ENOMEM; - goto err_map_io; - } - err = request_irq(INT_PCIE_INTR, tegra_pcie_isr, IRQF_SHARED, "PCIE", &tegra_pcie); if (err) { pr_err("PCIE: Failed to register IRQ: %d\n", err); - goto err_irq; + goto err_req_io; } set_irq_flags(INT_PCIE_INTR, IRQF_VALID); return 0; -err_irq: - iounmap(tegra_pcie_io_base); -err_map_io: - release_resource(&tegra_pcie.res_mmio); err_req_io: iounmap(tegra_pcie.regs); err_map_reg: diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 54d8f34fdee5..f7e12ede008c 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,6 +1,6 @@ if ARCH_U300 -menu "ST-Ericsson AB U300/U330/U335/U365 Platform" +menu "ST-Ericsson AB U300/U335 Platform" comment "ST-Ericsson Mobile Platform Products" @@ -10,46 +10,7 @@ config MACH_U300 select PINCTRL_U300 select PINCTRL_COH901 -comment "ST-Ericsson U300/U330/U335/U365 Feature Selections" - -choice - prompt "U300/U330/U335/U365 system type" - default MACH_U300_BS2X - ---help--- - You need to select the target system, i.e. the - U300/U330/U335/U365 board that you want to compile your kernel - for. - -config MACH_U300_BS2X - bool "S26/S26/B25/B26 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S26/S25 test products. (Also works on - B26/B25 big boards.) - -config MACH_U300_BS330 - bool "S330/B330 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S330/B330 test products. - -config MACH_U300_BS335 - bool "S335/B335 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S335/B335 test products. - -config MACH_U300_BS365 - bool "S365/B365 Test Products" - depends on MACH_U300 - help - Select this if you're developing on the - S365/B365 test products. - -endchoice +comment "ST-Ericsson U300/U335 Feature Selections" config U300_DEBUG bool "Debug support for U300" diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 7e47d37aeb0e..5a86c58da396 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -7,7 +7,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_U300) += u300.o obj-$(CONFIG_SPI_PL022) += spi.o obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_I2C_STU300) += i2c.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 03acf1883ec7..ef6f602b7e48 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -3,7 +3,7 @@ * arch/arm/mach-u300/core.c * * - * Copyright (C) 2007-2010 ST-Ericsson SA + * Copyright (C) 2007-2012 ST-Ericsson SA * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -31,23 +31,26 @@ #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> +#include <linux/platform_data/pinctrl-coh901.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/hardware/vic.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> #include <mach/coh901318.h> #include <mach/hardware.h> #include <mach/syscon.h> -#include <mach/dma_channels.h> -#include <mach/gpio-u300.h> +#include <mach/irqs.h> +#include "timer.h" #include "spi.h" #include "i2c.h" #include "u300-gpio.h" +#include "dma_channels.h" /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -76,7 +79,7 @@ static struct map_desc u300_io_desc[] __initdata = { }, }; -void __init u300_map_io(void) +static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); /* We enable a real big DMA buffer if need be. */ @@ -101,7 +104,6 @@ static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ -#ifdef CONFIG_MACH_U300_BS335 static struct amba_pl011_data uart1_plat_data = { #ifdef CONFIG_COH901318 .dma_filter = coh901318_filter_id, @@ -113,7 +115,6 @@ static struct amba_pl011_data uart1_plat_data = { /* Fast device at 0x7000 offset */ static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, { IRQ_U300_UART1 }, &uart1_plat_data); -#endif /* AHB device at 0x4000 offset */ static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); @@ -152,9 +153,7 @@ static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, */ static struct amba_device *amba_devs[] __initdata = { &uart0_device, -#ifdef CONFIG_MACH_U300_BS335 &uart1_device, -#endif &pl022_device, &pl172_device, &mmcsd_device, @@ -188,7 +187,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT2, .flags = IORESOURCE_IRQ, }, -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335) { .name = "gpio3", .start = IRQ_U300_GPIO_PORT3, @@ -201,8 +199,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT4, .flags = IORESOURCE_IRQ, }, -#endif -#ifdef CONFIG_MACH_U300_BS335 { .name = "gpio5", .start = IRQ_U300_GPIO_PORT5, @@ -215,7 +211,6 @@ static struct resource gpio_resources[] = { .end = IRQ_U300_GPIO_PORT6, .flags = IORESOURCE_IRQ, }, -#endif /* CONFIG_MACH_U300_BS335 */ }; static struct resource keypad_resources[] = { @@ -323,7 +318,6 @@ static struct resource dma_resource[] = { } }; -#ifdef CONFIG_MACH_U300_BS335 /* points out all dma slave channels. * Syntax is [A1, B1, A2, B2, .... ,-1,-1] * Select all channels from A to B, end of list is marked with -1,-1 @@ -336,14 +330,6 @@ static int dma_slave_channels[] = { static int dma_memcpy_channels[] = { U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1}; -#else /* CONFIG_MACH_U300_BS335 */ - -static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1}; -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1}; - -#endif - /** register dma for memory access * * active 1 means dma intends to access memory @@ -1395,7 +1381,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .param.ctrl_lli = flags_memcpy_lli, .param.ctrl_lli_last = flags_memcpy_lli_last, }, -#ifdef CONFIG_MACH_U300_BS335 { .number = U300_DMA_UART1_TX, .name = "UART1 TX", @@ -1406,28 +1391,6 @@ const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { .name = "UART1 RX", .priority_high = 0, } -#else - { - .number = U300_DMA_GENERAL_PURPOSE_9, - .name = "GENERAL 09", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_10, - .name = "GENERAL 10", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - } -#endif }; @@ -1480,18 +1443,7 @@ static struct platform_device pinctrl_device = { * GPIO block, with different number of ports. */ static struct u300_gpio_platform u300_gpio_plat = { -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) - .variant = U300_GPIO_COH901335, - .ports = 3, -#endif -#ifdef CONFIG_MACH_U300_BS335 - .variant = U300_GPIO_COH901571_3_BS335, .ports = 7, -#endif -#ifdef CONFIG_MACH_U300_BS365 - .variant = U300_GPIO_COH901571_3_BS365, - .ports = 5, -#endif .gpio_base = 0, .gpio_irq_base = IRQ_U300_GPIO_BASE, .pinctrl_device = &pinctrl_device, @@ -1651,7 +1603,7 @@ static struct platform_device *platform_devs[] __initdata = { * together so some interrupts are connected to the first one and some * to the second one. */ -void __init u300_init_irq(void) +static void __init u300_init_irq(void) { u32 mask[2] = {0, 0}; struct clk *clk; @@ -1756,29 +1708,11 @@ static void __init u300_init_check_chip(void) printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ "(chip ID 0x%04x)\n", chipname, val); -#ifdef CONFIG_MACH_U300_BS330 - if ((val & 0xFF00U) != 0xd800) { - printk(KERN_ERR "Platform configured for BS330 " \ - "with DB3200 but %s detected, expect problems!", - chipname); - } -#endif -#ifdef CONFIG_MACH_U300_BS335 if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { printk(KERN_ERR "Platform configured for BS335 " \ " with DB3350 but %s detected, expect problems!", chipname); } -#endif -#ifdef CONFIG_MACH_U300_BS365 - if ((val & 0xFF00U) != 0xe800) { - printk(KERN_ERR "Platform configured for BS365 " \ - "with DB3210 but %s detected, expect problems!", - chipname); - } -#endif - - } /* @@ -1811,7 +1745,7 @@ static void __init u300_assign_physmem(void) } } -void __init u300_init_devices(void) +static void __init u300_init_machine(void) { int i; u16 val; @@ -1852,7 +1786,7 @@ void __init u300_init_devices(void) /* Forward declare this function from the watchdog */ void coh901327_watchdog_reset(void); -void u300_restart(char mode, const char *cmd) +static void u300_restart(char mode, const char *cmd) { switch (mode) { case 's': @@ -1868,3 +1802,15 @@ void u300_restart(char mode, const char *cmd) /* Wait for system do die/reset. */ while (1); } + +MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") + /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ + .atag_offset = 0x100, + .map_io = u300_map_io, + .nr_irqs = NR_IRQS_U300, + .init_irq = u300_init_irq, + .handle_irq = vic_handle_irq, + .timer = &u300_timer, + .init_machine = u300_init_machine, + .restart = u300_restart, +MACHINE_END diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/dma_channels.h index b239149ba0d0..4e8a88fbca49 100644 --- a/arch/arm/mach-u300/include/mach/dma_channels.h +++ b/arch/arm/mach-u300/dma_channels.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/dma_channels.h * * - * Copyright (C) 2007-2009 ST-Ericsson + * Copyright (C) 2007-2012 ST-Ericsson * License terms: GNU General Public License (GPL) version 2 * Map file for the U300 dma driver. * Author: Per Friden <per.friden@stericsson.com> @@ -50,19 +50,10 @@ #define U300_DMA_GENERAL_PURPOSE_6 35 #define U300_DMA_GENERAL_PURPOSE_7 36 #define U300_DMA_GENERAL_PURPOSE_8 37 -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_UART1_TX 38 #define U300_DMA_UART1_RX 39 -#else -#define U300_DMA_GENERAL_PURPOSE_9 38 -#define U300_DMA_GENERAL_PURPOSE_10 39 -#endif -#ifdef CONFIG_MACH_U300_BS335 #define U300_DMA_DEVICE_CHANNELS 32 -#else -#define U300_DMA_DEVICE_CHANNELS 30 -#endif #define U300_DMA_CHANNELS 40 diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index cb04bd6ab3e7..0d4620ed853c 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-u300/i2c.c * - * Copyright (C) 2009 ST-Ericsson AB + * Copyright (C) 2009-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * * Register board i2c devices @@ -261,7 +261,6 @@ static struct i2c_board_info __initdata bus0_i2c_board_info[] = { }; static struct i2c_board_info __initdata bus1_i2c_board_info[] = { -#ifdef CONFIG_MACH_U300_BS335 { .type = "fwcam", .addr = 0x10, @@ -270,9 +269,6 @@ static struct i2c_board_info __initdata bus1_i2c_board_info[] = { .type = "fwcam", .addr = 0x5d, }, -#else - { }, -#endif }; void __init u300_i2c_register_board_devices(void) diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h deleted file mode 100644 index 92e3cc872c66..000000000000 --- a/arch/arm/mach-u300/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -int __clk_get(struct clk *clk); -void __clk_put(struct clk *clk); - -#endif diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h deleted file mode 100644 index e81400c1753a..000000000000 --- a/arch/arm/mach-u300/include/mach/gpio-u300.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2007-2011 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * GPIO block resgister definitions and inline macros for - * U300 GPIO COH 901 335 or COH 901 571/3 - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __MACH_U300_GPIO_U300_H -#define __MACH_U300_GPIO_U300_H - -/** - * enum u300_gpio_variant - the type of U300 GPIO employed - */ -enum u300_gpio_variant { - U300_GPIO_COH901335, - U300_GPIO_COH901571_3_BS335, - U300_GPIO_COH901571_3_BS365, -}; - -/** - * struct u300_gpio_platform - U300 GPIO platform data - * @variant: IP block variant - * @ports: number of GPIO block ports - * @gpio_base: first GPIO number for this block (use a free range) - * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) - * @pinctrl_device: pin control device to spawn as child - */ -struct u300_gpio_platform { - enum u300_gpio_variant variant; - u8 ports; - int gpio_base; - int gpio_irq_base; - struct platform_device *pinctrl_device; -}; - -#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ec09c1e07b1a..e27425a63fa1 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/irqs.h * * - * Copyright (C) 2006-2009 ST-Ericsson AB + * Copyright (C) 2006-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * IRQ channel definitions for the U300 platforms. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -31,10 +31,6 @@ #define IRQ_U300_XGAM_GAMCON 14 #define IRQ_U300_XGAM_CDI 15 #define IRQ_U300_XGAM_CDICON 16 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -/* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 17 -#endif #define IRQ_U300_XGAM_PDI 18 #define IRQ_U300_XGAM_PDICON 19 #define IRQ_U300_XGAM_GAMEACC 20 @@ -55,8 +51,6 @@ #define IRQ_U300_GPIO_PORT1 34 #define IRQ_U300_GPIO_PORT2 35 -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ - defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ #define IRQ_U300_WDOG 36 #define IRQ_U300_EVHIST 37 @@ -68,15 +62,8 @@ #define IRQ_U300_RTC 43 #define IRQ_U300_NFIF 44 #define IRQ_U300_NFIF2 45 -#endif - -/* DB3150 and DB3200 have only 45 IRQs */ -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 46 -#endif /* The DB3350-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS335 #define IRQ_U300_ISP_F0 46 #define IRQ_U300_ISP_F1 47 #define IRQ_U300_ISP_F2 48 @@ -89,25 +76,6 @@ #define IRQ_U300_GPIO_PORT5 55 #define IRQ_U300_GPIO_PORT6 56 #define U300_VIC_IRQS_END 57 -#endif - -/* The DB3210-specific interrupt lines */ -#ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 36 -#define IRQ_U300_GPIO_PORT4 37 -#define IRQ_U300_WDOG 38 -#define IRQ_U300_EVHIST 39 -#define IRQ_U300_MSPRO 40 -#define IRQ_U300_MMCSD_MCIINTR0 41 -#define IRQ_U300_MMCSD_MCIINTR1 42 -#define IRQ_U300_I2C0 43 -#define IRQ_U300_I2C1 44 -#define IRQ_U300_RTC 45 -#define IRQ_U300_NFIF 46 -#define IRQ_U300_NFIF2 47 -#define IRQ_U300_SYSCON_PLL_LOCK 48 -#define U300_VIC_IRQS_END 49 -#endif /* Maximum 8*7 GPIO lines */ #ifdef CONFIG_PINCTRL_COH901 @@ -117,6 +85,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h deleted file mode 100644 index 096333f32fc3..000000000000 --- a/arch/arm/mach-u300/include/mach/platform.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/platform.h - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Basic platform init and mapping functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#ifndef __ASSEMBLY__ - -void u300_map_io(void); -void u300_init_irq(void); -void u300_init_devices(void); -void u300_restart(char, const char *); -extern struct sys_timer u300_timer; - -#endif diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 6e84f07a7c6f..10bdd0be9774 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -3,7 +3,7 @@ * arch/arm/mach-u300/include/mach/syscon.h * * - * Copyright (C) 2008 ST-Ericsson AB + * Copyright (C) 2008-2012 ST-Ericsson AB * * Author: Rickard Andersson <rickard.andersson@stericsson.com> */ @@ -36,9 +36,7 @@ #define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) /* Reset lines for SLOW devices 16bit (R/W) */ #define U300_SYSCON_RSR (0x0014) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) -#endif #define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) #define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) #define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) @@ -50,9 +48,7 @@ #define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) /* Reset lines for FAST devices 16bit (R/W) */ #define U300_SYSCON_RFR (0x0018) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) -#endif #define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) #define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) #define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) @@ -62,10 +58,8 @@ #define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) /* Reset lines for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_RRR (0x001c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) #define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) -#endif #define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) #define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) #define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) @@ -79,9 +73,7 @@ #define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) /* Clock enable for SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CESR (0x0020) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) -#endif #define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) #define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) #define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) @@ -92,24 +84,20 @@ #define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) /* Clock enable for FAST peripherals 16bit (R/W) */ #define U300_SYSCON_CEFR (0x0024) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) -#endif #define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) #define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) #define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) #define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) -#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) -#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) -#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) -#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) #define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) /* Clock enable for the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CERR (0x0028) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) #define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) -#endif #define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) #define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) #define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) @@ -124,9 +112,7 @@ #define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) /* Single block clock enable 16bit (-/W) */ #define U300_SYSCON_SBCER (0x002c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) -#endif #define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) #define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) #define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) @@ -135,9 +121,7 @@ #define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) #define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) #define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) -#endif #define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) #define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) #define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) @@ -147,10 +131,8 @@ #define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) #define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) #define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) #define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) -#endif #define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) #define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) #define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) @@ -168,9 +150,7 @@ /* Same values as above for SBCER */ /* Clock force SLOW peripherals 16bit (R/W) */ #define U300_SYSCON_CFSR (0x003c) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) -#endif #define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) #define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) #define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) @@ -184,10 +164,8 @@ /* Values not defined. Define if you want to use them. */ /* Clock force the rest of the peripherals 16bit (R/W) */ #define U300_SYSCON_CFRR (0x44) -#ifdef CONFIG_MACH_U300_BS335 #define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) #define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) -#endif #define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) #define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) #define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 65f87c523892..1e49d901f2c9 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -28,7 +28,6 @@ #define PLAT_NAND_CLE (1 << 16) #define PLAT_NAND_ALE (1 << 17) - /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 @@ -46,11 +45,7 @@ #define U300_BOOTROM_VIRT_BASE 0xffff0000 /* SEMI config base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_SEMI_CONFIG_BASE 0x2FFE0000 -#else -#define U300_SEMI_CONFIG_BASE 0x30000000 -#endif /* * AHB peripherals @@ -99,10 +94,8 @@ /* SPI controller */ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) -#ifdef CONFIG_MACH_U300_BS335 /* Fast UART1 on U335 only */ #define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) -#endif /* * SLOW peripherals @@ -151,10 +144,8 @@ * REST peripherals */ -/* ISP (image signal processor) is only available in U335 */ -#ifdef CONFIG_MACH_U300_BS335 +/* ISP (image signal processor) */ #define U300_ISP_BASE (0xA0008000) -#endif /* DMA Controller base */ #define U300_DMAC_BASE (0xC0020000) @@ -166,17 +157,9 @@ #define U300_APEX_BASE (0xc0030000) /* Video Encoder Base */ -#ifdef CONFIG_MACH_U300_BS335 #define U300_VIDEOENC_BASE (0xc0080000) -#else -#define U300_VIDEOENC_BASE (0xc0040000) -#endif /* XGAM Base */ #define U300_XGAM_BASE (0xd0000000) -/* - * Virtual accessor macros for static devices - */ - #endif diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index a1affacfa59c..02e6659286d5 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -12,7 +12,7 @@ #include <linux/amba/pl022.h> #include <linux/err.h> #include <mach/coh901318.h> -#include <mach/dma_channels.h> +#include "dma_channels.h" /* * The following is for the actual devices on the SSP/SPI bus diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 56ac06d38ec1..1da10e20e996 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -17,14 +17,17 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> /* Generic stuff */ #include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/mach/irq.h> + +#include "timer.h" /* * APP side special timer registers diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h new file mode 100644 index 000000000000..b5e9791762e0 --- /dev/null +++ b/arch/arm/mach-u300/timer.h @@ -0,0 +1 @@ +extern struct sys_timer u300_timer; diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h index 847dc25300c6..83f50772e169 100644 --- a/arch/arm/mach-u300/u300-gpio.h +++ b/arch/arm/mach-u300/u300-gpio.h @@ -1,50 +1,11 @@ /* - * Individual pin assignments for the B26/S26. Notice that the - * actual usage of these pins depends on the PAD MUX settings, that - * is why the same number can potentially appear several times. - * In the reference design each pin is only used for one purpose. - * These were determined by inspecting the B26/S26 schematic: - * 2/1911-ROA 128 1603 - */ -#ifdef CONFIG_MACH_U300_BS2X -#define U300_GPIO_PIN_UART_RX 0 -#define U300_GPIO_PIN_UART_TX 1 -#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */ -#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */ -#define U300_GPIO_PIN_CAM_SLEEP 4 -#define U300_GPIO_PIN_CAM_REG_EN 5 -#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */ -#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */ -#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */ -#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */ -#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */ -#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */ -#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */ -#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */ -#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */ - -#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */ -#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */ -#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */ -#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */ -#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */ -#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */ -#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */ -#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */ -#endif - -/* - * Individual pin assignments for the B330/S330 and B365/S365. + * Individual pin assignments for the B335/S335. * Notice that the actual usage of these pins depends on the * PAD MUX settings, that is why the same number can potentially * appear several times. In the reference design each pin is only * used for one purpose. These were determined by inspecting the * S365 schematic. */ -#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \ - defined(CONFIG_MACH_U300_BS335) #define U300_GPIO_PIN_UART_RX 0 #define U300_GPIO_PIN_UART_TX 1 #define U300_GPIO_PIN_UART_CTS 2 @@ -90,8 +51,6 @@ #define U300_GPIO_PIN_GPIO38 38 /* Unrouted */ #define U300_GPIO_PIN_GPIO39 39 /* Unrouted */ -#ifdef CONFIG_MACH_U300_BS335 - #define U300_GPIO_PIN_GPIO40 40 /* Unrouted */ #define U300_GPIO_PIN_GPIO41 41 /* Unrouted */ #define U300_GPIO_PIN_GPIO42 42 /* Unrouted */ @@ -109,6 +68,3 @@ #define U300_GPIO_PIN_GPIO53 53 /* Unrouted */ #define U300_GPIO_PIN_GPIO54 54 /* Unrouted */ #define U300_GPIO_PIN_GPIO55 55 /* Unrouted */ -#endif - -#endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c deleted file mode 100644 index f30c69d91d99..000000000000 --- a/arch/arm/mach-u300/u300.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * arch/arm/mach-u300/u300.c - * - * - * Copyright (C) 2006-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * Platform machine definition. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/memblock.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/hardware/vic.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/memory.h> - -static void __init u300_init_machine(void) -{ - u300_init_devices(); -} - -#ifdef CONFIG_MACH_U300_BS2X -#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS330 -#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS335 -#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board" -#endif - -#ifdef CONFIG_MACH_U300_BS365 -#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board" -#endif - -MACHINE_START(U300, MACH_U300_STRING) - /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .atag_offset = 0x100, - .map_io = u300_map_io, - .init_irq = u300_init_irq, - .handle_irq = vic_handle_irq, - .timer = &u300_timer, - .init_machine = u300_init_machine, - .restart = u300_restart, -MACHINE_END diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index db3c52d56ca4..3ee761d3a86f 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -19,7 +19,6 @@ #include <linux/mfd/abx500/ab8500.h> #include <asm/mach/map.h> -#include <asm/pmu.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -122,7 +121,7 @@ struct arm_pmu_platdata db8500_pmu_platdata = { static struct platform_device db8500_pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(db8500_pmu_resources), .resource = db8500_pmu_resources, .dev.platform_data = &db8500_pmu_platdata, diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cd8ea3588f93..ca7902c6ed18 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,11 +169,6 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, { - .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = IO_SPACE_LIMIT, - .type = MT_DEVICE }, #endif }; diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 408e58da46c6..3e5d425e2a92 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,7 +29,6 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul -#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE /* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h deleted file mode 100644 index 0406513be7d8..000000000000 --- a/arch/arm/mach-versatile/include/mach/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define PCIO_BASE 0xeb000000ul - -#define __io(a) ((a) + PCIO_BASE) - -#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index e95bf84cc837..2f84f4094f13 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,13 +169,6 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; -static struct resource io_port = { - .name = "PCI", - .start = 0, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, @@ -207,12 +200,6 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } - ret = request_resource(&ioport_resource, &io_port); - if (ret) { - printk(KERN_ERR "PCI: unable to allocate I/O " - "port region (%d)\n", ret); - goto out; - } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -227,11 +214,9 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) } /* - * the IO resource for this bus * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -260,9 +245,11 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) goto out; } + ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0); + if (ret) + goto out; + if (nr == 0) { - sys->mem_offset = 0; - sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); @@ -319,7 +306,6 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) void __init pci_versatile_preinit(void) { - pcibios_min_io = 0x44000000; pcibios_min_mem = 0x50000000; __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 61c492403b05..e4073a60a864 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -13,7 +13,6 @@ #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> -#include <asm/pmu.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> @@ -144,7 +143,7 @@ static struct resource pmu_resources[] = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, }; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 566750fa57d4..9d869f93a3da 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -36,6 +36,7 @@ #include <asm/system_info.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "mm.h" int ioremap_page(unsigned long virt, unsigned long phys, @@ -383,3 +384,16 @@ void __arm_iounmap(volatile void __iomem *io_addr) arch_iounmap(io_addr); } EXPORT_SYMBOL(__arm_iounmap); + +#ifdef CONFIG_PCI +int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr) +{ + BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT); + + return ioremap_page_range(PCI_IO_VIRT_BASE + offset, + PCI_IO_VIRT_BASE + offset + SZ_64K, + phys_addr, + __pgprot(get_mem_type(MT_DEVICE)->prot_pte)); +} +EXPORT_SYMBOL_GPL(pci_ioremap_io); +#endif diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160618ef..a8ee92da3544 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d0451e84a..a7a9e41fa2c2 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include "mm.h" @@ -216,7 +217,7 @@ static struct mem_type mem_types[] = { .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB, .domain = DOMAIN_IO, - }, + }, [MT_DEVICE_WC] = { /* ioremap_wc */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC, .prot_l1 = PMD_TYPE_TABLE, @@ -777,14 +778,27 @@ void __init iotable_init(struct map_desc *io_desc, int nr) create_mapping(md); vm->addr = (void *)(md->virtual & PAGE_MASK); vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); - vm->phys_addr = __pfn_to_phys(md->pfn); - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->phys_addr = __pfn_to_phys(md->pfn); + vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; vm->flags |= VM_ARM_MTYPE(md->type); vm->caller = iotable_init; vm_area_add_early(vm++); } } +void __init vm_reserve_area_early(unsigned long addr, unsigned long size, + void *caller) +{ + struct vm_struct *vm; + + vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); + vm->addr = (void *)addr; + vm->size = size; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; + vm->caller = caller; + vm_area_add_early(vm); +} + #ifndef CONFIG_ARM_LPAE /* @@ -802,14 +816,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr) static void __init pmd_empty_section_gap(unsigned long addr) { - struct vm_struct *vm; - - vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); - vm->addr = (void *)addr; - vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; - vm->caller = pmd_empty_section_gap; - vm_area_add_early(vm); + vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap); } static void __init fill_pmd_gaps(void) @@ -820,7 +827,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) @@ -858,6 +865,28 @@ static void __init fill_pmd_gaps(void) #define fill_pmd_gaps() do { } while (0) #endif +#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H) +static void __init pci_reserve_io(void) +{ + struct vm_struct *vm; + unsigned long addr; + + /* we're still single threaded hence no lock needed here */ + for (vm = vmlist; vm; vm = vm->next) { + if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + continue; + addr = (unsigned long)vm->addr; + addr &= ~(SZ_2M - 1); + if (addr == PCI_IO_VIRT_BASE) + return; + + } + vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io); +} +#else +#define pci_reserve_io() do { } while (0) +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); @@ -1141,6 +1170,9 @@ static void __init devicemaps_init(struct machine_desc *mdesc) mdesc->map_io(); fill_pmd_gaps(); + /* Reserve fixed i/o space in VMALLOC region */ + pci_reserve_io(); + /* * Finally flush the caches and tlb to ensure that we're in a * consistent state wrt the writebuffer. This also ensures that diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 8daae9b230ea..362474b5c40d 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -192,30 +192,24 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) if (nr != 0) return 0; - res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL); + res = kzalloc(sizeof(struct resource), GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - res[0].start = IOP3XX_PCI_LOWER_IO_PA; - res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; - res[0].name = "IOP3XX PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - request_resource(&ioport_resource, &res[0]); - - res[1].start = IOP3XX_PCI_LOWER_MEM_PA; - res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; - res[1].name = "IOP3XX PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - request_resource(&iomem_resource, &res[1]); + res->start = IOP3XX_PCI_LOWER_MEM_PA; + res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; + res->name = "IOP3XX PCI Memory Space"; + res->flags = IORESOURCE_MEM; + request_resource(&iomem_resource, res); /* * Use whatever translation is already setup. */ sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; - sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, res, sys->mem_offset); + + pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA); return 1; } @@ -367,7 +361,6 @@ void __init iop3xx_pci_preinit_cond(void) void __init iop3xx_pci_preinit(void) { - pcibios_min_io = 0; pcibios_min_mem = 0; iop3xx_atu_disable(); diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c index a2024b8685a1..ad9f9744a82d 100644 --- a/arch/arm/plat-iop/pmu.c +++ b/arch/arm/plat-iop/pmu.c @@ -9,7 +9,6 @@ */ #include <linux/platform_device.h> -#include <asm/pmu.h> #include <mach/irqs.h> static struct resource pmu_resource = { @@ -26,7 +25,7 @@ static struct resource pmu_resource = { static struct platform_device pmu_device = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .resource = &pmu_resource, .num_resources = 1, }; diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index bade586fed0f..5b217f460f18 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -25,11 +25,6 @@ static struct map_desc iop3xx_std_desc[] __initdata = { .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, .type = MT_UNCACHED, - }, { /* PCI IO space */ - .virtual = IOP3XX_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), - .length = IOP3XX_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 6ac720031150..149237e24850 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o +obj-y := time.o devices.o cpu.o system.o irq-common.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c deleted file mode 100644 index 5079787273d2..000000000000 --- a/arch/arm/plat-mxc/clock.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * Based on arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -/* #define DEBUG */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <linux/proc_fs.h> -#include <linux/semaphore.h> -#include <linux/string.h> - -#include <mach/clock.h> -#include <mach/hardware.h> - -#ifndef CONFIG_COMMON_CLK -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -/*------------------------------------------------------------------------- - * Standard clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ - -static void __clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - WARN_ON(!clk->usecount); - - if (!(--clk->usecount)) { - if (clk->disable) - clk->disable(clk); - __clk_disable(clk->parent); - __clk_disable(clk->secondary); - } -} - -static int __clk_enable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (clk->usecount++ == 0) { - __clk_enable(clk->parent); - __clk_enable(clk->secondary); - - if (clk->enable) - clk->enable(clk); - } - return 0; -} - -/* This function increments the reference count on the clock and enables the - * clock if not already enabled. The parent clock tree is recursively enabled - */ -int clk_enable(struct clk *clk) -{ - int ret = 0; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = __clk_enable(clk); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* This function decrements the reference count on the clock and disables - * the clock when reference count is 0. The parent clock tree is - * recursively disabled - */ -void clk_disable(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - __clk_disable(clk); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_disable); - -/* Retrieve the *current* clock rate. If the clock itself - * does not provide a special calculation routine, ask - * its parent and so on, until one is able to return - * a valid clock rate - */ -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return 0UL; - - if (clk->get_rate) - return clk->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -/* Round the requested clock rate to the nearest supported - * rate that is less than or equal to the requested rate. - * This is dependent on the clock's current parent. - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk == NULL || IS_ERR(clk) || !clk->round_rate) - return 0; - - return clk->round_rate(clk, rate); -} -EXPORT_SYMBOL(clk_round_rate); - -/* Set the clock to the requested clock rate. The rate must - * match a supported rate exactly based on what clk_round_rate returns - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) - return ret; - - mutex_lock(&clocks_mutex); - ret = clk->set_rate(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* Set the clock's parent to another clock source */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = -EINVAL; - struct clk *old; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || - IS_ERR(parent) || clk->set_parent == NULL) - return ret; - - if (clk->usecount) - clk_enable(parent); - - mutex_lock(&clocks_mutex); - ret = clk->set_parent(clk, parent); - if (ret == 0) { - old = clk->parent; - clk->parent = parent; - } else { - old = parent; - } - mutex_unlock(&clocks_mutex); - - if (clk->usecount) - clk_disable(old); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -/* Retrieve the clock's parent clock source */ -struct clk *clk_get_parent(struct clk *clk) -{ - struct clk *ret = NULL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -#else - -/* - * Lock to protect the clock module (ccm) registers. Used - * on all i.MXs - */ -DEFINE_SPINLOCK(imx_ccm_lock); - -#endif /* CONFIG_COMMON_CLK */ - -/* - * Get the resulting clock rate from a PLL register value and the input - * frequency. PLLs with this register layout can at least be found on - * MX1, MX21, MX27 and MX31 - * - * mfi + mfn / (mfd + 1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq) -{ - long long ll; - int mfn_abs; - unsigned int mfi, mfn, mfd, pd; - - mfi = (reg_val >> 10) & 0xf; - mfn = reg_val & 0x3ff; - mfd = (reg_val >> 16) & 0x3ff; - pd = (reg_val >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - mfn_abs = mfn; - - /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit - * 2's complements number - */ - if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) - mfn_abs = 0x400 - mfn; - - freq *= 2; - freq /= pd + 1; - - ll = (unsigned long long)freq * mfn_abs; - - do_div(ll, mfd + 1); - - if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) - ll = -ll; - - ll = (freq * mfi) + ll; - - return ll; -} diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 73db34bf588a..b5b6f8083130 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -23,7 +23,6 @@ #include <linux/err.h> #include <linux/slab.h> #include <mach/hardware.h> -#include <mach/clock.h> #define CLK32_FREQ 32768 #define NANOSECOND (1000 * 1000 * 1000) diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index 2020d84956c3..d390f00bd294 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -87,7 +87,7 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { #ifdef CONFIG_SOC_IMX35 const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { #define imx35_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) + imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K) imx35_imx_uart_data_entry(0, 1), imx35_imx_uart_data_entry(1, 2), imx35_imx_uart_data_entry(2, 3), diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h deleted file mode 100644 index bd940c795cbb..000000000000 --- a/arch/arm/plat-mxc/include/mach/clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_CLOCK_H__ -#define __ASM_ARCH_MXC_CLOCK_H__ - -#ifndef __ASSEMBLY__ -#include <linux/list.h> - -#ifndef CONFIG_COMMON_CLK -struct module; - -struct clk { - int id; - /* Source clock this clk depends on */ - struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; - /* Reference count of clock enable/disable */ - __s8 usecount; - /* Register bit position for clock's enable/disable control. */ - u8 enable_shift; - /* Register address for clock's enable/disable control. */ - void __iomem *enable_reg; - u32 flags; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); -#endif /* CONFIG_COMMON_CLK */ - -extern spinlock_t imx_ccm_lock; - -unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref); - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h index 3c080a32dbf5..7ded6f1f74bc 100644 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,7 +23,6 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ -#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -31,7 +30,6 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) -#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 1996c3e3b8fe..3da78cfc5a94 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -21,7 +21,6 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/delay.h> -#include <linux/module.h> #include <mach/hardware.h> #include <mach/common.h> @@ -29,9 +28,6 @@ #include <asm/proc-fns.h> #include <asm/mach-types.h> -void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; -EXPORT_SYMBOL_GPL(imx_ioremap); - static void __iomem *wdog_base; /* diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index fc49f3dabd76..6ff45d53362c 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -35,7 +35,6 @@ #include <media/s5p_hdmi.h> #include <asm/irq.h> -#include <asm/pmu.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -1132,7 +1131,7 @@ static struct resource s5p_pmu_resource[] = { static struct platform_device s5p_device_pmu = { .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, + .id = -1, .num_resources = ARRAY_SIZE(s5p_pmu_resource), .resource = s5p_pmu_resource, }; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2997e56ce0dd..7bc7948c5432 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -158,7 +158,6 @@ edb9315a MACH_EDB9315A EDB9315A 772 stargate2 MACH_STARGATE2 STARGATE2 774 intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 -pnx4008 MACH_PNX4008 PNX4008 782 cpuat91 MACH_CPUAT91 CPUAT91 787 iq81340sc MACH_IQ81340SC IQ81340SC 799 iq81340mc MACH_IQ81340MC IQ81340MC 801 |