diff options
Diffstat (limited to 'arch')
88 files changed, 10497 insertions, 858 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e2274bc0b544..94003142082c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -118,6 +118,7 @@ endif machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 + machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig new file mode 100644 index 000000000000..e042d27eae16 --- /dev/null +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -0,0 +1,1321 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc8 +# Wed Oct 1 17:14:22 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP3_BEAGLE=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA25X is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig new file mode 100644 index 000000000000..948a212fb1cc --- /dev/null +++ b/arch/arm/configs/omap_ldp_defconfig @@ -0,0 +1,1044 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc5 +# Fri Oct 10 11:49:41 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OMAP_LDP=y +# CONFIG_MACH_OVERO is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig new file mode 100644 index 000000000000..49200967a153 --- /dev/null +++ b/arch/arm/configs/overo_defconfig @@ -0,0 +1,1885 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc8 +# Fri Oct 3 11:50:34 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OVERO=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_93CX6=m +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +CONFIG_LIBERTAS_USB=y +CONFIG_LIBERTAS_SDIO=y +CONFIG_LIBERTAS_DEBUG=y +CONFIG_USB_ZD1201=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +CONFIG_RTL8187=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_AU0828 is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_ANYSEE is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_DVB_CINERGYT2=m +# CONFIG_DVB_CINERGYT2_TUNING is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 478c2c9a22cb..5fba20731710 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -201,7 +201,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return -EINVAL; parent = clk->parent; - if (unlikely(parent == 0)) + if (unlikely(parent == NULL)) return -EIO; realrate = parent->rate; @@ -499,7 +499,7 @@ static int omap1_clk_enable_generic(struct clk *clk) if (clk->flags & ALWAYS_ENABLED) return 0; - if (unlikely(clk->enable_reg == 0)) { + if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); return -EINVAL; @@ -535,7 +535,7 @@ static void omap1_clk_disable_generic(struct clk *clk) __u16 regval16; __u32 regval32; - if (clk->enable_reg == 0) + if (clk->enable_reg == NULL) return; if (clk->flags & ENABLE_REG_32BIT) { @@ -577,7 +577,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) return clk->parent->rate / (1 << dsor_exp); } - if(clk->round_rate != 0) + if (clk->round_rate != NULL) return clk->round_rate(clk, rate); return clk->rate; @@ -625,7 +625,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk) /* Clocks in the DSP domain need api_ck. Just assume bootloader * has not enabled any DSP clocks */ - if ((u32)clk->enable_reg == DSP_IDLECT2) { + if (clk->enable_reg == DSP_IDLECT2) { printk(KERN_INFO "Skipping reset check for DSP domain " "clock \"%s\"\n", clk->name); return; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 6eadf72828d8..5635b511ab6f 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -324,7 +324,7 @@ static struct clk dspper_ck = { .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL | VIRTUAL_IO_ADDRESS, - .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, .recalc = &omap1_ckctl_recalc_dsp_domain, @@ -338,7 +338,7 @@ static struct clk dspxor_ck = { .parent = &ck_ref, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, - .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_dsp_domain, @@ -350,7 +350,7 @@ static struct clk dsptim_ck = { .parent = &ck_ref, .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | VIRTUAL_IO_ADDRESS, - .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_dsp_domain, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 99982d3380c9..e382b438c64e 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { } #if defined(CONFIG_OMAP_STI) -#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000) +#define OMAP1_STI_BASE 0xfffea000 #define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400) static struct resource sti_resources[] = { diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 2baeaeb0c900..7de7c6915584 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -103,30 +103,6 @@ static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) { } #endif -static int omap1_mcbsp_check(unsigned int id) -{ - /* REVISIT: Check correctly for number of registered McBSPs */ - if (cpu_is_omap730()) { - if (id > OMAP_MAX_MCBSP_COUNT - 2) { - printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", - id + 1); - return -ENODEV; - } - return 0; - } - - if (cpu_is_omap15xx() || cpu_is_omap16xx()) { - if (id > OMAP_MAX_MCBSP_COUNT - 1) { - printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", - id + 1); - return -ENODEV; - } - return 0; - } - - return -ENODEV; -} - static void omap1_mcbsp_request(unsigned int id) { /* @@ -151,7 +127,6 @@ static void omap1_mcbsp_free(unsigned int id) } static struct omap_mcbsp_ops omap1_mcbsp_ops = { - .check = omap1_mcbsp_check, .request = omap1_mcbsp_request, .free = omap1_mcbsp_free, }; @@ -160,7 +135,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { { .phys_base = OMAP730_MCBSP1_BASE, - .virt_base = io_p2v(OMAP730_MCBSP1_BASE), .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_730_McBSP1RX, @@ -169,7 +143,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { }, { .phys_base = OMAP730_MCBSP2_BASE, - .virt_base = io_p2v(OMAP730_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_730_McBSP2RX, @@ -187,7 +160,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { { .phys_base = OMAP1510_MCBSP1_BASE, - .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_McBSP1RX, @@ -197,7 +169,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1510_MCBSP2_BASE, - .virt_base = io_p2v(OMAP1510_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, .rx_irq = INT_1510_SPI_RX, @@ -206,7 +177,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1510_MCBSP3_BASE, - .virt_base = OMAP1510_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_McBSP3RX, @@ -225,7 +195,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { { .phys_base = OMAP1610_MCBSP1_BASE, - .virt_base = OMAP1610_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, .rx_irq = INT_McBSP1RX, @@ -235,7 +204,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1610_MCBSP2_BASE, - .virt_base = io_p2v(OMAP1610_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, .rx_irq = INT_1610_McBSP2_RX, @@ -244,7 +212,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }, { .phys_base = OMAP1610_MCBSP3_BASE, - .virt_base = OMAP1610_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, .rx_irq = INT_McBSP3RX, @@ -271,6 +238,18 @@ int __init omap1_mcbsp_init(void) } if (cpu_is_omap730()) + omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + if (cpu_is_omap15xx()) + omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; + if (cpu_is_omap16xx()) + omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ; + + mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), + GFP_KERNEL); + if (!mcbsp_ptr) + return -ENOMEM; + + if (cpu_is_omap730()) omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, OMAP730_MCBSP_PDATA_SZ); diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index aefc967fc003..528691d5cb51 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE), - .mapbase = (unsigned long)OMAP_UART1_BASE, + .membase = IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE), - .mapbase = (unsigned long)OMAP_UART2_BASE, + .membase = IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE), - .mapbase = (unsigned long)OMAP_UART3_BASE, + .membase = IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7069c9d536f1..4832fcc7d04a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -15,8 +15,17 @@ config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP24XX +config ARCH_OMAP34XX + bool "OMAP34xx Based System" + depends on ARCH_OMAP3 + +config ARCH_OMAP3430 + bool "OMAP3430 support" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select ARCH_OMAP_OTG + comment "OMAP Board Type" - depends on ARCH_OMAP2 + depends on ARCH_OMAP2 || ARCH_OMAP3 config MACH_OMAP_GENERIC bool "Generic OMAP board" @@ -35,3 +44,14 @@ config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on ARCH_OMAP2 && ARCH_OMAP24XX +config MACH_OMAP3_BEAGLE + bool "OMAP3 BEAGLE board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OMAP_LDP + bool "OMAP3 LDP board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + +config MACH_OVERO + bool "Gumstix Overo board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 93ee990618ef..c69392372c99 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,16 +4,21 @@ # Common support obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \ - devices.o serial.o gpmc.o timer-gp.o + devices.o serial.o gpmc.o timer-gp.o powerdomain.o \ + clockdomain.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o +obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o +ifeq ($(CONFIG_PM),y) +obj-y += pm.o +obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o +endif # Clock framework obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o @@ -24,4 +29,7 @@ obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o +obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o +obj-$(CONFIG_MACH_OVERO) += board-overo.o diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c new file mode 100644 index 000000000000..1ea59986aa7a --- /dev/null +++ b/arch/arm/mach-omap2/board-ldp.c @@ -0,0 +1,86 @@ +/* + * linux/arch/arm/mach-omap2/board-ldp.c + * + * Copyright (C) 2008 Texas Instruments Inc. + * Nishant Kamat <nskamat@ti.com> + * + * Modified from mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/workqueue.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/board-ldp.h> +#include <mach/mcspi.h> +#include <mach/gpio.h> +#include <mach/board.h> +#include <mach/common.h> +#include <mach/gpmc.h> + +#include <asm/io.h> +#include <asm/delay.h> +#include <mach/control.h> + +static void __init omap_ldp_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_uart_config ldp_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel ldp_config[] __initdata = { + { OMAP_TAG_UART, &ldp_uart_config }, +}; + +static int __init omap_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, NULL, 0); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init omap_ldp_init(void) +{ + omap_i2c_init(); + omap_board_config = ldp_config; + omap_board_config_size = ARRAY_SIZE(ldp_config); + omap_serial_init(); +} + +static void __init omap_ldp_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP_LDP, "OMAP LDP board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_ldp_map_io, + .init_irq = omap_ldp_init_irq, + .init_machine = omap_ldp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c new file mode 100644 index 000000000000..baa79674e9d5 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -0,0 +1,244 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3beagle.c + * + * Copyright (C) 2008 Texas Instruments + * + * Modified from mach-omap2/board-3430sdp.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/board.h> +#include <mach/common.h> +#include <mach/gpmc.h> +#include <mach/nand.h> + + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition omap3beagle_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3beagle_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3beagle_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3beagle_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3beagle_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3beagle_nand_data, + }, + .num_resources = 1, + .resource = &omap3beagle_nand_resource, +}; + +static struct omap_uart_config omap3_beagle_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static void __init omap3_beagle_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct platform_device omap3_beagle_lcd_device = { + .name = "omap3beagle_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "beagleboard::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "beagleboard::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, + { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, +}; + +static struct platform_device *omap3_beagle_devices[] __initdata = { + &omap3_beagle_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3beagle_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3beagle_nand_data.cs = nandcs; + omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3beagle_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static void __init omap3_beagle_init(void) +{ + platform_add_devices(omap3_beagle_devices, + ARRAY_SIZE(omap3_beagle_devices)); + omap_board_config = omap3_beagle_config; + omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); + omap_serial_init(); + omap3beagle_flash_init(); +} + +static void __init omap3_beagle_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") + /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_beagle_map_io, + .init_irq = omap3_beagle_init_irq, + .init_machine = omap3_beagle_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c new file mode 100644 index 000000000000..e09aa59a399c --- /dev/null +++ b/arch/arm/mach-omap2/board-overo.c @@ -0,0 +1,242 @@ +/* + * board-overo.c (Gumstix Overo) + * + * Initial code: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> + +#include <mach/board-overo.h> +#include <mach/board.h> +#include <mach/common.h> +#include <mach/gpio.h> +#include <mach/gpmc.h> +#include <mach/hardware.h> +#include <mach/nand.h> + +#define NAND_BLOCK_SIZE SZ_128K +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +static struct mtd_partition overo_nand_partitions[] = { + { + .name = "xloader", + .offset = 0, /* Offset = 0x00000 */ + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "uboot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 14 * NAND_BLOCK_SIZE, + }, + { + .name = "uboot environment", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */ + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "linux", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data overo_nand_data = { + .parts = overo_nand_partitions, + .nr_parts = ARRAY_SIZE(overo_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +static struct resource overo_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device overo_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &overo_nand_data, + }, + .num_resources = 1, + .resource = &overo_nand_resource, +}; + + +static void __init overo_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + overo_nand_data.cs = nandcs; + overo_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&overo_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +static struct omap_uart_config overo_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static int __init overo_i2c_init(void) +{ + /* i2c2 pins are used for gpio */ + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +static void __init overo_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct platform_device overo_lcd_device = { + .name = "overo_lcd", + .id = -1, +}; + +static struct omap_lcd_config overo_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel overo_config[] __initdata = { + { OMAP_TAG_UART, &overo_uart_config }, + { OMAP_TAG_LCD, &overo_lcd_config }, +}; + +static struct platform_device *overo_devices[] __initdata = { + &overo_lcd_device, +}; + +static void __init overo_init(void) +{ + overo_i2c_init(); + platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); + omap_board_config = overo_config; + omap_board_config_size = ARRAY_SIZE(overo_config); + omap_serial_init(); + overo_flash_init(); + + if ((gpio_request(OVERO_GPIO_W2W_NRESET, + "OVERO_GPIO_W2W_NRESET") == 0) && + (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + gpio_export(OVERO_GPIO_W2W_NRESET, 0); + gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); + udelay(10); + gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); + } else { + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_W2W_NRESET\n"); + } + + if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && + (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + gpio_export(OVERO_GPIO_BT_XGATE, 0); + else + printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); + + if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && + (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { + gpio_export(OVERO_GPIO_BT_NRESET, 0); + gpio_set_value(OVERO_GPIO_BT_NRESET, 0); + mdelay(6); + gpio_set_value(OVERO_GPIO_BT_NRESET, 1); + } else { + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_BT_NRESET\n"); + } + + if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && + (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + gpio_export(OVERO_GPIO_USBH_CPEN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_USBH_CPEN\n"); + + if ((gpio_request(OVERO_GPIO_USBH_NRESET, + "OVERO_GPIO_USBH_NRESET") == 0) && + (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0)) + gpio_export(OVERO_GPIO_USBH_NRESET, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_USBH_NRESET\n"); +} + +static void __init overo_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OVERO, "Gumstix Overo") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = overo_map_io, + .init_irq = overo_init_irq, + .init_machine = overo_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 97cde3d3611d..ad721e0cbf7a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -25,6 +25,7 @@ #include <linux/bitops.h> #include <mach/clock.h> +#include <mach/clockdomain.h> #include <mach/sram.h> #include <mach/cpu.h> #include <asm/div64.h> @@ -61,10 +62,36 @@ u8 cpu_mask; /*------------------------------------------------------------------------- - * Omap2 specific clock functions + * OMAP2/3 specific clock functions *-------------------------------------------------------------------------*/ /** + * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk + * @clk: OMAP clock struct ptr to use + * + * Convert a clockdomain name stored in a struct clk 'clk' into a + * clockdomain pointer, and save it into the struct clk. Intended to be + * called during clk_register(). No return value. + */ +void omap2_init_clk_clkdm(struct clk *clk) +{ + struct clockdomain *clkdm; + + if (!clk->clkdm_name) + return; + + clkdm = clkdm_lookup(clk->clkdm_name); + if (clkdm) { + pr_debug("clock: associated clk %s to clkdm %s\n", + clk->name, clk->clkdm_name); + clk->clkdm = clkdm; + } else { + pr_debug("clock: could not associate clk %s to " + "clkdm %s\n", clk->name, clk->clkdm_name); + } +} + +/** * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware * @clk: OMAP clock struct ptr to use * @@ -250,7 +277,7 @@ int _omap2_clk_enable(struct clk *clk) if (clk->enable) return clk->enable(clk); - if (unlikely(clk->enable_reg == 0)) { + if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ @@ -282,7 +309,7 @@ void _omap2_clk_disable(struct clk *clk) return; } - if (clk->enable_reg == 0) { + if (clk->enable_reg == NULL) { /* * 'Independent' here refers to a clock which is not * controlled by its parent. @@ -307,6 +334,9 @@ void omap2_clk_disable(struct clk *clk) _omap2_clk_disable(clk); if (likely((u32)clk->parent)) omap2_clk_disable(clk->parent); + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); + } } @@ -323,11 +353,19 @@ int omap2_clk_enable(struct clk *clk) return ret; } + if (clk->clkdm) + omap2_clkdm_clk_enable(clk->clkdm, clk); + ret = _omap2_clk_enable(clk); - if (unlikely(ret != 0) && clk->parent) { - omap2_clk_disable(clk->parent); - clk->usecount--; + if (unlikely(ret != 0)) { + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); + + if (clk->parent) { + omap2_clk_disable(clk->parent); + clk->usecount--; + } } } @@ -476,7 +514,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) /* Given a clock and a rate apply a clock specific rounding function */ long omap2_clk_round_rate(struct clk *clk, unsigned long rate) { - if (clk->round_rate != 0) + if (clk->round_rate != NULL) return clk->round_rate(clk, rate); if (clk->flags & RATE_FIXED) @@ -565,7 +603,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) */ void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask) { - if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0))) + if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL))) return NULL; *field_mask = clk->clksel_mask; @@ -585,7 +623,7 @@ u32 omap2_clksel_get_divisor(struct clk *clk) void __iomem *div_addr; div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == 0) + if (div_addr == NULL) return 0; field_val = __raw_readl(div_addr) & field_mask; @@ -604,7 +642,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; div_addr = omap2_get_clksel(clk, &field_mask); - if (div_addr == 0) + if (div_addr == NULL) return -EINVAL; field_val = omap2_divisor_to_clksel(clk, new_div); @@ -642,7 +680,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ - if (clk->set_rate != 0) + if (clk->set_rate != NULL) ret = clk->set_rate(clk, rate); if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) @@ -663,7 +701,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr, const struct clksel_rate *clkr; *parent_div = 0; - *src_addr = 0; + *src_addr = NULL; clks = omap2_get_clksel_by_parent(clk, src_clk); if (clks == NULL) @@ -704,7 +742,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) field_val = omap2_clksel_get_src_field(&src_addr, new_parent, &field_mask, clk, &parent_div); - if (src_addr == 0) + if (src_addr == NULL) return -EINVAL; if (clk->usecount > 0) diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 626e5fa93b6a..1fb330e0847d 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -21,6 +21,7 @@ /* The maximum error between a target DPLL rate and the rounded rate in Hz */ #define DEFAULT_DPLL_RATE_TOLERANCE 50000 +int omap2_clk_init(void); int omap2_clk_enable(struct clk *clk); void omap2_clk_disable(struct clk *clk); long omap2_clk_round_rate(struct clk *clk, unsigned long rate); @@ -36,6 +37,7 @@ void omap2_clk_disable_unused(struct clk *clk); #endif void omap2_clksel_recalc(struct clk *clk); +void omap2_init_clk_clkdm(struct clk *clk); void omap2_init_clksel_parent(struct clk *clk); u32 omap2_clksel_get_divisor(struct clk *clk); u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index be4e25554e05..242a19d86ccd 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -626,6 +626,7 @@ static struct clk func_32k_ck = { .rate = 32000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &propagate_rate, }; @@ -634,17 +635,19 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .enable = &omap2_enable_osc_ck, .disable = &omap2_disable_osc_ck, .recalc = &omap2_osc_clk_recalc, }; -/* With out modem likely 12MHz, with modem likely 13MHz */ +/* Without modem likely 12MHz, with modem likely 13MHz */ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ .name = "sys_ck", /* ~ ref_clk also */ .parent = &osc_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_sys_clk_recalc, }; @@ -653,6 +656,7 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .rate = 54000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &propagate_rate, }; @@ -684,6 +688,7 @@ static struct clk dpll_ck = { .dpll_data = &dpll_dd, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, .set_rate = &omap2_reprogram_dpllcore, }; @@ -694,6 +699,7 @@ static struct clk apll96_ck = { .rate = 96000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, .enable = &omap2_clk_fixed_enable, @@ -707,6 +713,7 @@ static struct clk apll54_ck = { .rate = 54000000, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, .enable = &omap2_clk_fixed_enable, @@ -741,6 +748,7 @@ static struct clk func_54m_ck = { .parent = &apll54_ck, /* can also be alt_clk */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_54M_SOURCE, @@ -753,6 +761,7 @@ static struct clk core_ck = { .parent = &dpll_ck, /* can also be 32k */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -779,6 +788,7 @@ static struct clk func_96m_ck = { .parent = &apll96_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP2430_96M_SOURCE, @@ -811,6 +821,7 @@ static struct clk func_48m_ck = { .parent = &apll96_ck, /* 96M or Alt */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_48M_SOURCE, @@ -826,6 +837,7 @@ static struct clk func_12m_ck = { .fixed_div = 4, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_fixed_divisor_recalc, }; @@ -878,6 +890,7 @@ static struct clk sys_clkout_src = { .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, .init = &omap2_init_clksel_parent, @@ -908,6 +921,7 @@ static struct clk sys_clkout = { .parent = &sys_clkout_src, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, .clksel = sys_clkout_clksel, @@ -921,6 +935,7 @@ static struct clk sys_clkout2_src = { .name = "sys_clkout2_src", .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, .init = &omap2_init_clksel_parent, @@ -942,6 +957,7 @@ static struct clk sys_clkout2 = { .name = "sys_clkout2", .parent = &sys_clkout2_src, .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK, + .clkdm_name = "wkup_clkdm", .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, .clksel = sys_clkout2_clksel, @@ -954,6 +970,7 @@ static struct clk emul_ck = { .name = "emul_ck", .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL, .enable_bit = OMAP24XX_EMULATION_EN_SHIFT, .recalc = &followparent_recalc, @@ -990,12 +1007,13 @@ static struct clk mpu_ck = { /* Control cpu */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clkdm_name = "mpu_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK, .clksel = mpu_clksel, .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, + .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate }; @@ -1031,6 +1049,7 @@ static struct clk dsp_fck = { .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clkdm_name = "dsp_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), @@ -1054,10 +1073,7 @@ static const struct clksel dsp_irate_ick_clksel[] = { { .parent = NULL } }; -/* - * This clock does not exist as such in the TRM, but is added to - * separate source selection from XXX - */ +/* This clock does not exist as such in the TRM. */ static struct clk dsp_irate_ick = { .name = "dsp_irate_ick", .parent = &dsp_fck, @@ -1089,11 +1105,17 @@ static struct clk iva2_1_ick = { .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, }; +/* + * The IVA1 is an ARM7 core on the 2420 that has nothing to do with + * the C54x, but which is contained in the DSP powerdomain. Does not + * exist on later OMAPs. + */ static struct clk iva1_ifck = { .name = "iva1_ifck", .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, + .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), @@ -1109,6 +1131,7 @@ static struct clk iva1_mpu_int_ifck = { .name = "iva1_mpu_int_ifck", .parent = &iva1_ifck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "iva1_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT, .fixed_div = 2, @@ -1156,6 +1179,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ALWAYS_ENABLED | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .clkdm_name = "core_l3_clkdm", .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, .clksel = core_l3_clksel, @@ -1177,11 +1201,13 @@ static const struct clksel usb_l4_ick_clksel[] = { { .parent = NULL }, }; +/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */ static struct clk usb_l4_ick = { /* FS-USB interface clock */ .name = "usb_l4_ick", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), @@ -1193,10 +1219,42 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */ }; /* + * L4 clock management domain + * + * This domain contains lots of interface clocks from the L4 interface, some + * functional clocks. Fixed APLL functional source clocks are managed in + * this domain. + */ +static const struct clksel_rate l4_core_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel l4_clksel[] = { + { .parent = &core_l3_ck, .rates = l4_core_l3_rates }, + { .parent = NULL } +}; + +static struct clk l4_ck = { /* used both as an ick and fck */ + .name = "l4_ck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, + .clkdm_name = "core_l4_clkdm", + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), + .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, + .clksel = l4_clksel, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate +}; + +/* * SSI is in L3 management domain, its direct parent is core not l3, * many core power domain entities are grouped into the L3 clock * domain. - * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK + * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK * * ssr = core/1/2/3/4/5, sst = 1/2 ssr. */ @@ -1221,6 +1279,7 @@ static struct clk ssi_ssr_sst_fck = { .parent = &core_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_SSI_SHIFT, .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), @@ -1231,6 +1290,7 @@ static struct clk ssi_ssr_sst_fck = { .set_rate = &omap2_clksel_set_rate }; + /* * GFX clock domain * Clocks: @@ -1254,6 +1314,7 @@ static struct clk gfx_3d_fck = { .name = "gfx_3d_fck", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_3D_SHIFT, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), @@ -1268,6 +1329,7 @@ static struct clk gfx_2d_fck = { .name = "gfx_2d_fck", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_2D_SHIFT, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), @@ -1282,6 +1344,7 @@ static struct clk gfx_ick = { .name = "gfx_ick", /* From l3 */ .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "gfx_clkdm", .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, .recalc = &followparent_recalc, @@ -1311,6 +1374,7 @@ static struct clk mdm_ick = { /* used both as a ick and fck */ .name = "mdm_ick", .parent = &core_ck, .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT, + .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN), .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT, .clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL), @@ -1325,52 +1389,13 @@ static struct clk mdm_osc_ck = { .name = "mdm_osc_ck", .parent = &osc_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "mdm_clkdm", .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN), .enable_bit = OMAP2430_EN_OSC_SHIFT, .recalc = &followparent_recalc, }; /* - * L4 clock management domain - * - * This domain contains lots of interface clocks from the L4 interface, some - * functional clocks. Fixed APLL functional source clocks are managed in - * this domain. - */ -static const struct clksel_rate l4_core_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX }, - { .div = 0 } -}; - -static const struct clksel l4_clksel[] = { - { .parent = &core_l3_ck, .rates = l4_core_l3_rates }, - { .parent = NULL } -}; - -static struct clk l4_ck = { /* used both as an ick and fck */ - .name = "l4_ck", - .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | - ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), - .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, - .clksel = l4_clksel, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate -}; - -static struct clk ssi_l4_ick = { - .name = "ssi_l4_ick", - .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP24XX_EN_SSI_SHIFT, - .recalc = &followparent_recalc, -}; - -/* * DSS clock domain * CLOCKs: * DSS_L4_ICLK, DSS_L3_ICLK, @@ -1409,6 +1434,7 @@ static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ .name = "dss_ick", .parent = &l4_ck, /* really both l3 and l4 */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, .recalc = &followparent_recalc, @@ -1419,6 +1445,7 @@ static struct clk dss1_fck = { .parent = &core_ck, /* Core or sys */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS1_SHIFT, .init = &omap2_init_clksel_parent, @@ -1451,6 +1478,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */ .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_DSS2_SHIFT, .init = &omap2_init_clksel_parent, @@ -1464,6 +1492,7 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */ .name = "dss_54m_fck", /* 54m tv clk */ .parent = &func_54m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "dss_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_TV_SHIFT, .recalc = &followparent_recalc, @@ -1491,6 +1520,7 @@ static struct clk gpt1_ick = { .name = "gpt1_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, .recalc = &followparent_recalc, @@ -1500,6 +1530,7 @@ static struct clk gpt1_fck = { .name = "gpt1_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPT1_SHIFT, .init = &omap2_init_clksel_parent, @@ -1515,6 +1546,7 @@ static struct clk gpt2_ick = { .name = "gpt2_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, .recalc = &followparent_recalc, @@ -1524,6 +1556,7 @@ static struct clk gpt2_fck = { .name = "gpt2_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT2_SHIFT, .init = &omap2_init_clksel_parent, @@ -1537,6 +1570,7 @@ static struct clk gpt3_ick = { .name = "gpt3_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, .recalc = &followparent_recalc, @@ -1546,6 +1580,7 @@ static struct clk gpt3_fck = { .name = "gpt3_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT3_SHIFT, .init = &omap2_init_clksel_parent, @@ -1559,6 +1594,7 @@ static struct clk gpt4_ick = { .name = "gpt4_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, .recalc = &followparent_recalc, @@ -1568,6 +1604,7 @@ static struct clk gpt4_fck = { .name = "gpt4_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT4_SHIFT, .init = &omap2_init_clksel_parent, @@ -1581,6 +1618,7 @@ static struct clk gpt5_ick = { .name = "gpt5_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, .recalc = &followparent_recalc, @@ -1590,6 +1628,7 @@ static struct clk gpt5_fck = { .name = "gpt5_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT5_SHIFT, .init = &omap2_init_clksel_parent, @@ -1603,6 +1642,7 @@ static struct clk gpt6_ick = { .name = "gpt6_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, .recalc = &followparent_recalc, @@ -1612,6 +1652,7 @@ static struct clk gpt6_fck = { .name = "gpt6_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT6_SHIFT, .init = &omap2_init_clksel_parent, @@ -1634,6 +1675,7 @@ static struct clk gpt7_fck = { .name = "gpt7_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT7_SHIFT, .init = &omap2_init_clksel_parent, @@ -1647,6 +1689,7 @@ static struct clk gpt8_ick = { .name = "gpt8_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, .recalc = &followparent_recalc, @@ -1656,6 +1699,7 @@ static struct clk gpt8_fck = { .name = "gpt8_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT8_SHIFT, .init = &omap2_init_clksel_parent, @@ -1669,6 +1713,7 @@ static struct clk gpt9_ick = { .name = "gpt9_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, .recalc = &followparent_recalc, @@ -1678,6 +1723,7 @@ static struct clk gpt9_fck = { .name = "gpt9_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT9_SHIFT, .init = &omap2_init_clksel_parent, @@ -1691,6 +1737,7 @@ static struct clk gpt10_ick = { .name = "gpt10_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, .recalc = &followparent_recalc, @@ -1700,6 +1747,7 @@ static struct clk gpt10_fck = { .name = "gpt10_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT10_SHIFT, .init = &omap2_init_clksel_parent, @@ -1713,6 +1761,7 @@ static struct clk gpt11_ick = { .name = "gpt11_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, .recalc = &followparent_recalc, @@ -1722,6 +1771,7 @@ static struct clk gpt11_fck = { .name = "gpt11_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT11_SHIFT, .init = &omap2_init_clksel_parent, @@ -1735,6 +1785,7 @@ static struct clk gpt12_ick = { .name = "gpt12_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, .recalc = &followparent_recalc, @@ -1744,6 +1795,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, .init = &omap2_init_clksel_parent, @@ -1758,6 +1810,7 @@ static struct clk mcbsp1_ick = { .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, .recalc = &followparent_recalc, @@ -1768,6 +1821,7 @@ static struct clk mcbsp1_fck = { .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, .recalc = &followparent_recalc, @@ -1778,6 +1832,7 @@ static struct clk mcbsp2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, .recalc = &followparent_recalc, @@ -1788,6 +1843,7 @@ static struct clk mcbsp2_fck = { .id = 2, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, .recalc = &followparent_recalc, @@ -1798,6 +1854,7 @@ static struct clk mcbsp3_ick = { .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, .recalc = &followparent_recalc, @@ -1808,6 +1865,7 @@ static struct clk mcbsp3_fck = { .id = 3, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, .recalc = &followparent_recalc, @@ -1818,6 +1876,7 @@ static struct clk mcbsp4_ick = { .id = 4, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, .recalc = &followparent_recalc, @@ -1828,6 +1887,7 @@ static struct clk mcbsp4_fck = { .id = 4, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, .recalc = &followparent_recalc, @@ -1838,6 +1898,7 @@ static struct clk mcbsp5_ick = { .id = 5, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, .recalc = &followparent_recalc, @@ -1848,6 +1909,7 @@ static struct clk mcbsp5_fck = { .id = 5, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, .recalc = &followparent_recalc, @@ -1857,6 +1919,7 @@ static struct clk mcspi1_ick = { .name = "mcspi_ick", .id = 1, .parent = &l4_ck, + .clkdm_name = "core_l4_clkdm", .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, @@ -1868,6 +1931,7 @@ static struct clk mcspi1_fck = { .id = 1, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, .recalc = &followparent_recalc, @@ -1878,6 +1942,7 @@ static struct clk mcspi2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, .recalc = &followparent_recalc, @@ -1888,6 +1953,7 @@ static struct clk mcspi2_fck = { .id = 2, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, .recalc = &followparent_recalc, @@ -1898,6 +1964,7 @@ static struct clk mcspi3_ick = { .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, .recalc = &followparent_recalc, @@ -1908,6 +1975,7 @@ static struct clk mcspi3_fck = { .id = 3, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, .recalc = &followparent_recalc, @@ -1917,6 +1985,7 @@ static struct clk uart1_ick = { .name = "uart1_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, .recalc = &followparent_recalc, @@ -1926,6 +1995,7 @@ static struct clk uart1_fck = { .name = "uart1_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART1_SHIFT, .recalc = &followparent_recalc, @@ -1935,6 +2005,7 @@ static struct clk uart2_ick = { .name = "uart2_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, .recalc = &followparent_recalc, @@ -1944,6 +2015,7 @@ static struct clk uart2_fck = { .name = "uart2_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_UART2_SHIFT, .recalc = &followparent_recalc, @@ -1953,6 +2025,7 @@ static struct clk uart3_ick = { .name = "uart3_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, .recalc = &followparent_recalc, @@ -1962,6 +2035,7 @@ static struct clk uart3_fck = { .name = "uart3_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_UART3_SHIFT, .recalc = &followparent_recalc, @@ -1971,6 +2045,7 @@ static struct clk gpios_ick = { .name = "gpios_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, .recalc = &followparent_recalc, @@ -1980,6 +2055,7 @@ static struct clk gpios_fck = { .name = "gpios_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, .recalc = &followparent_recalc, @@ -1989,6 +2065,7 @@ static struct clk mpu_wdt_ick = { .name = "mpu_wdt_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, .recalc = &followparent_recalc, @@ -1998,6 +2075,7 @@ static struct clk mpu_wdt_fck = { .name = "mpu_wdt_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "wkup_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, .recalc = &followparent_recalc, @@ -2006,31 +2084,40 @@ static struct clk mpu_wdt_fck = { static struct clk sync_32k_ick = { .name = "sync_32k_ick", .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT, .recalc = &followparent_recalc, }; + static struct clk wdt1_ick = { .name = "wdt1_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_WDT1_SHIFT, .recalc = &followparent_recalc, }; + static struct clk omapctrl_ick = { .name = "omapctrl_ick", .parent = &l4_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT, .recalc = &followparent_recalc, }; + static struct clk icr_ick = { .name = "icr_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP2430_EN_ICR_SHIFT, .recalc = &followparent_recalc, @@ -2040,15 +2127,22 @@ static struct clk cam_ick = { .name = "cam_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, .recalc = &followparent_recalc, }; +/* + * cam_fck controls both CAM_MCLK and CAM_FCLK. It should probably be + * split into two separate clocks, since the parent clocks are different + * and the clockdomains are also different. + */ static struct clk cam_fck = { .name = "cam_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_CAM_SHIFT, .recalc = &followparent_recalc, @@ -2058,6 +2152,7 @@ static struct clk mailboxes_ick = { .name = "mailboxes_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT, .recalc = &followparent_recalc, @@ -2067,6 +2162,7 @@ static struct clk wdt4_ick = { .name = "wdt4_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, .recalc = &followparent_recalc, @@ -2076,6 +2172,7 @@ static struct clk wdt4_fck = { .name = "wdt4_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_WDT4_SHIFT, .recalc = &followparent_recalc, @@ -2085,6 +2182,7 @@ static struct clk wdt3_ick = { .name = "wdt3_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, .recalc = &followparent_recalc, @@ -2094,6 +2192,7 @@ static struct clk wdt3_fck = { .name = "wdt3_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_WDT3_SHIFT, .recalc = &followparent_recalc, @@ -2103,6 +2202,7 @@ static struct clk mspro_ick = { .name = "mspro_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, .recalc = &followparent_recalc, @@ -2112,6 +2212,7 @@ static struct clk mspro_fck = { .name = "mspro_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, .recalc = &followparent_recalc, @@ -2121,6 +2222,7 @@ static struct clk mmc_ick = { .name = "mmc_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, .recalc = &followparent_recalc, @@ -2130,6 +2232,7 @@ static struct clk mmc_fck = { .name = "mmc_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_MMC_SHIFT, .recalc = &followparent_recalc, @@ -2139,6 +2242,7 @@ static struct clk fac_ick = { .name = "fac_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, .recalc = &followparent_recalc, @@ -2148,6 +2252,7 @@ static struct clk fac_fck = { .name = "fac_fck", .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_FAC_SHIFT, .recalc = &followparent_recalc, @@ -2157,6 +2262,7 @@ static struct clk eac_ick = { .name = "eac_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, .recalc = &followparent_recalc, @@ -2166,6 +2272,7 @@ static struct clk eac_fck = { .name = "eac_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_EAC_SHIFT, .recalc = &followparent_recalc, @@ -2175,6 +2282,7 @@ static struct clk hdq_ick = { .name = "hdq_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, .recalc = &followparent_recalc, @@ -2184,6 +2292,7 @@ static struct clk hdq_fck = { .name = "hdq_fck", .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_HDQ_SHIFT, .recalc = &followparent_recalc, @@ -2194,6 +2303,7 @@ static struct clk i2c2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, .recalc = &followparent_recalc, @@ -2204,6 +2314,7 @@ static struct clk i2c2_fck = { .id = 2, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C2_SHIFT, .recalc = &followparent_recalc, @@ -2214,6 +2325,7 @@ static struct clk i2chs2_fck = { .id = 2, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS2_SHIFT, .recalc = &followparent_recalc, @@ -2224,6 +2336,7 @@ static struct clk i2c1_ick = { .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, .recalc = &followparent_recalc, @@ -2234,6 +2347,7 @@ static struct clk i2c1_fck = { .id = 1, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_I2C1_SHIFT, .recalc = &followparent_recalc, @@ -2244,6 +2358,7 @@ static struct clk i2chs1_fck = { .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_I2CHS1_SHIFT, .recalc = &followparent_recalc, @@ -2252,7 +2367,9 @@ static struct clk i2chs1_fck = { static struct clk gpmc_fck = { .name = "gpmc_fck", .parent = &core_l3_ck, - .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2260,6 +2377,7 @@ static struct clk sdma_fck = { .name = "sdma_fck", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2267,6 +2385,7 @@ static struct clk sdma_ick = { .name = "sdma_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -2274,6 +2393,7 @@ static struct clk vlynq_ick = { .name = "vlynq_ick", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP242X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, .recalc = &followparent_recalc, @@ -2308,6 +2428,7 @@ static struct clk vlynq_fck = { .name = "vlynq_fck", .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP242X | DELAYED_APP, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, .init = &omap2_init_clksel_parent, @@ -2323,6 +2444,7 @@ static struct clk sdrc_ick = { .name = "sdrc_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP2430_EN_SDRC_SHIFT, .recalc = &followparent_recalc, @@ -2332,6 +2454,7 @@ static struct clk des_ick = { .name = "des_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_DES_SHIFT, .recalc = &followparent_recalc, @@ -2341,6 +2464,7 @@ static struct clk sha_ick = { .name = "sha_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_SHA_SHIFT, .recalc = &followparent_recalc, @@ -2350,6 +2474,7 @@ static struct clk rng_ick = { .name = "rng_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_RNG_SHIFT, .recalc = &followparent_recalc, @@ -2359,6 +2484,7 @@ static struct clk aes_ick = { .name = "aes_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_AES_SHIFT, .recalc = &followparent_recalc, @@ -2368,6 +2494,7 @@ static struct clk pka_ick = { .name = "pka_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), .enable_bit = OMAP24XX_EN_PKA_SHIFT, .recalc = &followparent_recalc, @@ -2377,6 +2504,7 @@ static struct clk usb_fck = { .name = "usb_fck", .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP24XX_EN_USB_SHIFT, .recalc = &followparent_recalc, @@ -2386,6 +2514,7 @@ static struct clk usbhs_ick = { .name = "usbhs_ick", .parent = &core_l3_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_USBHS_SHIFT, .recalc = &followparent_recalc, @@ -2396,6 +2525,7 @@ static struct clk mmchs1_ick = { .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, .recalc = &followparent_recalc, @@ -2406,6 +2536,7 @@ static struct clk mmchs1_fck = { .id = 1, .parent = &func_96m_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l3_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, .recalc = &followparent_recalc, @@ -2416,6 +2547,7 @@ static struct clk mmchs2_ick = { .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, .recalc = &followparent_recalc, @@ -2435,6 +2567,7 @@ static struct clk gpio5_ick = { .name = "gpio5_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, .recalc = &followparent_recalc, @@ -2444,6 +2577,7 @@ static struct clk gpio5_fck = { .name = "gpio5_fck", .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_GPIO5_SHIFT, .recalc = &followparent_recalc, @@ -2453,6 +2587,7 @@ static struct clk mdm_intc_ick = { .name = "mdm_intc_ick", .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT, .recalc = &followparent_recalc, @@ -2463,6 +2598,7 @@ static struct clk mmchsdb1_fck = { .id = 1, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT, .recalc = &followparent_recalc, @@ -2473,6 +2609,7 @@ static struct clk mmchsdb2_fck = { .id = 2, .parent = &func_32k_ck, .flags = CLOCK_IN_OMAP243X, + .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT, .recalc = &followparent_recalc, @@ -2551,7 +2688,6 @@ static struct clk *onchip_24xx_clks[] __initdata = { &usb_l4_ick, /* L4 domain clocks */ &l4_ck, /* used as both core_l4 and wu_l4 */ - &ssi_l4_ick, /* virtual meta-group clock */ &virt_prcm_set, /* general l4 interface ck, multi-parent functional clk */ diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index e5b475f21081..084e11082f80 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk) static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) { const struct dpll_data *dd; + u32 v; dd = clk->dpll_data; - cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask), - dd->control_reg); + v = __raw_readl(dd->control_reg); + v &= ~dd->enable_mask; + v |= clken_bits << __ffs(dd->enable_mask); + __raw_writel(v, dd->control_reg); } /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ @@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) state <<= dd->idlest_bit; idlest_mask = 1 << dd->idlest_bit; - while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) && + while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) && i < MAX_DPLL_WAIT_TRIES) { i++; udelay(1); @@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk) dd = clk->dpll_data; - v = cm_read_reg(dd->autoidle_reg); + v = __raw_readl(dd->autoidle_reg); v &= dd->autoidle_mask; v >>= __ffs(dd->autoidle_mask); @@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk) static void omap3_dpll_allow_idle(struct clk *clk) { const struct dpll_data *dd; + u32 v; if (!clk || !clk->dpll_data) return; @@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk) * by writing 0x5 instead of 0x1. Add some mechanism to * optionally enter this mode. */ - cm_rmw_reg_bits(dd->autoidle_mask, - DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask), - dd->autoidle_reg); + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); } /** @@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk) static void omap3_dpll_deny_idle(struct clk *clk) { const struct dpll_data *dd; + u32 v; if (!clk || !clk->dpll_data) return; dd = clk->dpll_data; - cm_rmw_reg_bits(dd->autoidle_mask, - DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask), - dd->autoidle_reg); + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); } /* Clock control for DPLL outputs */ @@ -482,8 +489,10 @@ int __init omap2_clk_init(void) for (clkp = onchip_34xx_clks; clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks); clkp++) { - if ((*clkp)->flags & cpu_clkflg) + if ((*clkp)->flags & cpu_clkflg) { clk_register(*clkp); + omap2_init_clk_clkdm(*clkp); + } } /* REVISIT: Not yet ready for OMAP3 */ diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index ec664457a11a..c38a8a09692f 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -478,7 +478,7 @@ static struct clk dpll3_m2_ck = { }; static const struct clksel core_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -495,7 +495,7 @@ static struct clk core_ck = { }; static const struct clksel dpll3_m2x2_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -541,7 +541,7 @@ static struct clk dpll3_m3x2_ck = { }; static const struct clksel emu_core_alwon_ck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -633,7 +633,7 @@ static struct clk dpll4_m2x2_ck = { }; static const struct clksel omap_96m_alwon_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -659,7 +659,7 @@ static struct clk omap_96m_fck = { }; static const struct clksel cm_96m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -701,7 +701,7 @@ static struct clk dpll4_m3x2_ck = { }; static const struct clksel virt_omap_54m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -911,7 +911,7 @@ static struct clk dpll5_m2_ck = { }; static const struct clksel omap_120m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -919,13 +919,13 @@ static const struct clksel omap_120m_fck_clksel[] = { static struct clk omap_120m_fck = { .name = "omap_120m_fck", .parent = &dpll5_m2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .clksel = omap_120m_fck_clksel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), + .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, + .clksel = omap_120m_fck_clksel, .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, - .recalc = &omap2_clksel_recalc, + .recalc = &omap2_clksel_recalc, }; /* CM EXTERNAL CLOCK OUTPUTS */ @@ -1034,7 +1034,7 @@ static struct clk dpll1_fck = { * called 'dpll1_fck' */ static const struct clksel mpu_clksel[] = { - { .parent = &dpll1_fck, .rates = dpll_bypass_rates }, + { .parent = &dpll1_fck, .rates = dpll_bypass_rates }, { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -1048,6 +1048,7 @@ static struct clk mpu_ck = { .clksel = mpu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "mpu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1075,6 +1076,8 @@ static struct clk arm_fck = { .recalc = &omap2_clksel_recalc, }; +/* XXX What about neon_clkdm ? */ + /* * REVISIT: This clock is never specifically defined in the 3430 TRM, * although it is referenced - so this is a guess @@ -1107,7 +1110,7 @@ static struct clk dpll2_fck = { */ static const struct clksel iva2_clksel[] = { - { .parent = &dpll2_fck, .rates = dpll_bypass_rates }, + { .parent = &dpll2_fck, .rates = dpll_bypass_rates }, { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -1123,6 +1126,7 @@ static struct clk iva2_ck = { .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK, .clksel = iva2_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .clkdm_name = "iva2_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1137,6 +1141,7 @@ static struct clk l3_ick = { .clksel = div2_core_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l3_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1154,6 +1159,7 @@ static struct clk l4_ick = { .clksel = div2_l3_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1183,43 +1189,57 @@ static const struct clksel gfx_l3_clksel[] = { { .parent = NULL } }; -static struct clk gfx_l3_fck = { - .name = "gfx_l3_fck", +/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ +static struct clk gfx_l3_ck = { + .name = "gfx_l3_ck", .parent = &l3_ick, .init = &omap2_init_clksel_parent, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), .enable_bit = OMAP_EN_GFX_SHIFT, + .flags = CLOCK_IN_OMAP3430ES1, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_l3_fck = { + .name = "gfx_l3_fck", + .parent = &gfx_l3_ck, + .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), .clksel_mask = OMAP_CLKSEL_GFX_MASK, .clksel = gfx_l3_clksel, - .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES, + .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES | + PARENT_CONTROLS_CLOCK, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk gfx_l3_ick = { .name = "gfx_l3_ick", - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), - .enable_bit = OMAP_EN_GFX_SHIFT, - .flags = CLOCK_IN_OMAP3430ES1, + .parent = &gfx_l3_ck, + .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; static struct clk gfx_cg1_ck = { .name = "gfx_cg1_ck", .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_2D_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; static struct clk gfx_cg2_ck = { .name = "gfx_cg2_ck", .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES1_EN_3D_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "gfx_3430es1_clkdm", .recalc = &followparent_recalc, }; @@ -1252,15 +1272,18 @@ static struct clk sgx_fck = { .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, .clksel = sgx_clksel, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "sgx_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk sgx_ick = { .name = "sgx_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_SGX_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "sgx_clkdm", .recalc = &followparent_recalc, }; @@ -1269,9 +1292,11 @@ static struct clk sgx_ick = { static struct clk d2d_26m_fck = { .name = "d2d_26m_fck", .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "d2d_clkdm", .recalc = &followparent_recalc, }; @@ -1291,6 +1316,7 @@ static struct clk gpt10_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1304,6 +1330,7 @@ static struct clk gpt11_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1341,6 +1368,7 @@ static struct clk core_96m_fck = { .parent = &omap_96m_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1351,6 +1379,7 @@ static struct clk mmchs3_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1361,6 +1390,7 @@ static struct clk mmchs2_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1370,6 +1400,7 @@ static struct clk mspro_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1380,6 +1411,7 @@ static struct clk mmchs1_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1390,16 +1422,18 @@ static struct clk i2c3_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; static struct clk i2c2_fck = { .name = "i2c_fck", - .id = 2, + .id = 2, .parent = &core_96m_fck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1410,6 +1444,7 @@ static struct clk i2c1_fck = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1443,6 +1478,7 @@ static struct clk mcbsp5_fck = { .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, .clksel = mcbsp_15_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1456,6 +1492,7 @@ static struct clk mcbsp1_fck = { .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, .clksel = mcbsp_15_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1466,6 +1503,7 @@ static struct clk core_48m_fck = { .parent = &omap_48m_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1543,6 +1581,7 @@ static struct clk core_12m_fck = { .parent = &omap_12m_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1581,6 +1620,7 @@ static struct clk ssi_ssr_fck = { .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, .clksel = ssi_ssr_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES, + .clkdm_name = "core_l4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1596,11 +1636,17 @@ static struct clk ssi_sst_fck = { /* CORE_L3_ICK based clocks */ +/* + * XXX must add clk_enable/clk_disable for these if standard code won't + * handle it + */ static struct clk core_l3_ick = { .name = "core_l3_ick", .parent = &l3_ick, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1610,6 +1656,7 @@ static struct clk hsotgusb_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1619,6 +1666,7 @@ static struct clk sdrc_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SDRC_SHIFT, .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1627,6 +1675,7 @@ static struct clk gpmc_fck = { .parent = &core_l3_ick, .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK | ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", .recalc = &followparent_recalc, }; @@ -1654,8 +1703,10 @@ static struct clk pka_ick = { static struct clk core_l4_ick = { .name = "core_l4_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1665,6 +1716,7 @@ static struct clk usbtll_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1675,6 +1727,7 @@ static struct clk mmchs3_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1685,6 +1738,7 @@ static struct clk icr_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_ICR_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1694,6 +1748,7 @@ static struct clk aes2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_AES2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1703,6 +1758,7 @@ static struct clk sha12_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SHA12_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1712,6 +1768,7 @@ static struct clk des2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_DES2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1722,6 +1779,7 @@ static struct clk mmchs2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1732,6 +1790,7 @@ static struct clk mmchs1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MMC1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1741,6 +1800,7 @@ static struct clk mspro_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MSPRO_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1750,6 +1810,7 @@ static struct clk hdq_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HDQ_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1760,6 +1821,7 @@ static struct clk mcspi4_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1770,6 +1832,7 @@ static struct clk mcspi3_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1780,6 +1843,7 @@ static struct clk mcspi2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1790,6 +1854,7 @@ static struct clk mcspi1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1800,6 +1865,7 @@ static struct clk i2c3_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1810,6 +1876,7 @@ static struct clk i2c2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1820,6 +1887,7 @@ static struct clk i2c1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_I2C1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1829,6 +1897,7 @@ static struct clk uart2_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1838,6 +1907,7 @@ static struct clk uart1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_UART1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1847,6 +1917,7 @@ static struct clk gpt11_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT11_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1856,6 +1927,7 @@ static struct clk gpt10_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_GPT10_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1866,6 +1938,7 @@ static struct clk mcbsp5_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1876,6 +1949,7 @@ static struct clk mcbsp1_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1885,6 +1959,7 @@ static struct clk fac_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, .flags = CLOCK_IN_OMAP3430ES1, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1894,6 +1969,7 @@ static struct clk mailboxes_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1913,6 +1989,7 @@ static struct clk ssi_l4_ick = { .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1922,6 +1999,7 @@ static struct clk ssi_ick = { .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_SSI_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; @@ -1996,7 +2074,7 @@ static struct clk des1_ick = { /* DSS */ static const struct clksel dss1_alwon_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -2011,33 +2089,40 @@ static struct clk dss1_alwon_fck = { .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = dss1_alwon_fck_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk dss_tv_fck = { .name = "dss_tv_fck", .parent = &omap_54m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; static struct clk dss_96m_fck = { .name = "dss_96m_fck", .parent = &omap_96m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_TV_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; static struct clk dss2_alwon_fck = { .name = "dss2_alwon_fck", .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_DSS2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; @@ -2045,16 +2130,18 @@ static struct clk dss_ick = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "dss_clkdm", .recalc = &followparent_recalc, }; /* CAM */ static const struct clksel cam_mclk_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, + { .parent = &sys_ck, .rates = dpll_bypass_rates }, { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates }, { .parent = NULL } }; @@ -2069,24 +2156,19 @@ static struct clk cam_mclk = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "cam_clkdm", .recalc = &omap2_clksel_recalc, }; -static struct clk cam_l3_ick = { - .name = "cam_l3_ick", - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .flags = CLOCK_IN_OMAP343X, - .recalc = &followparent_recalc, -}; - -static struct clk cam_l4_ick = { - .name = "cam_l4_ick", +static struct clk cam_ick = { + /* Handles both L3 and L4 clocks */ + .name = "cam_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "cam_clkdm", .recalc = &followparent_recalc, }; @@ -2095,45 +2177,45 @@ static struct clk cam_l4_ick = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", .parent = &omap_120m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", .parent = &omap_48m_fck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; -static struct clk usbhost_l3_ick = { - .name = "usbhost_l3_ick", - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .flags = CLOCK_IN_OMAP3430ES2, - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_l4_ick = { - .name = "usbhost_l4_ick", +static struct clk usbhost_ick = { + /* Handles both L3 and L4 clocks */ + .name = "usbhost_ick", .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; static struct clk usbhost_sar_fck = { .name = "usbhost_sar_fck", .parent = &osc_sys_ck, + .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL), .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "usbhost_clkdm", .recalc = &followparent_recalc, }; @@ -2175,6 +2257,7 @@ static struct clk usim_fck = { .recalc = &omap2_clksel_recalc, }; +/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ static struct clk gpt1_fck = { .name = "gpt1_fck", .init = &omap2_init_clksel_parent, @@ -2184,13 +2267,16 @@ static struct clk gpt1_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk wkup_32k_fck = { .name = "wkup_32k_fck", + .init = &omap2_init_clk_clkdm, .parent = &omap_32k_fck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2200,6 +2286,7 @@ static struct clk gpio1_fck = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2209,6 +2296,7 @@ static struct clk wdt2_fck = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2216,6 +2304,7 @@ static struct clk wkup_l4_ick = { .name = "wkup_l4_ick", .parent = &sys_ck, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2227,6 +2316,7 @@ static struct clk usim_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, .flags = CLOCK_IN_OMAP3430ES2, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2236,6 +2326,7 @@ static struct clk wdt2_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2245,6 +2336,7 @@ static struct clk wdt1_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2254,6 +2346,7 @@ static struct clk gpio1_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2263,15 +2356,18 @@ static struct clk omap_32ksync_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; +/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_ick = { .name = "gpt12_ick", .parent = &wkup_l4_ick, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT12_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2281,6 +2377,7 @@ static struct clk gpt1_ick = { .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT1_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -2291,16 +2388,20 @@ static struct clk gpt1_ick = { static struct clk per_96m_fck = { .name = "per_96m_fck", .parent = &omap_96m_alwon_fck, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static struct clk per_48m_fck = { .name = "per_48m_fck", .parent = &omap_48m_fck, + .init = &omap2_init_clk_clkdm, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2310,6 +2411,7 @@ static struct clk uart3_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2322,6 +2424,7 @@ static struct clk gpt2_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2334,6 +2437,7 @@ static struct clk gpt3_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2346,6 +2450,7 @@ static struct clk gpt4_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2358,6 +2463,7 @@ static struct clk gpt5_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2370,6 +2476,7 @@ static struct clk gpt6_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2382,6 +2489,7 @@ static struct clk gpt7_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2394,6 +2502,7 @@ static struct clk gpt8_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2406,12 +2515,14 @@ static struct clk gpt9_fck = { .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, .clksel = omap343x_gpt_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; static struct clk per_32k_alwon_fck = { .name = "per_32k_alwon_fck", .parent = &omap_32k_fck, + .clkdm_name = "per_clkdm", .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -2422,6 +2533,7 @@ static struct clk gpio6_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2431,6 +2543,7 @@ static struct clk gpio5_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2440,6 +2553,7 @@ static struct clk gpio4_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2449,6 +2563,7 @@ static struct clk gpio3_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2458,6 +2573,7 @@ static struct clk gpio2_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2467,6 +2583,7 @@ static struct clk wdt3_fck = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2475,6 +2592,7 @@ static struct clk per_l4_ick = { .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2484,6 +2602,7 @@ static struct clk gpio6_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2493,6 +2612,7 @@ static struct clk gpio5_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2502,6 +2622,7 @@ static struct clk gpio4_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2511,6 +2632,7 @@ static struct clk gpio3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2520,6 +2642,7 @@ static struct clk gpio2_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2529,6 +2652,7 @@ static struct clk wdt3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_WDT3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2538,6 +2662,7 @@ static struct clk uart3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_UART3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2547,6 +2672,7 @@ static struct clk gpt9_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT9_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2556,6 +2682,7 @@ static struct clk gpt8_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT8_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2565,6 +2692,7 @@ static struct clk gpt7_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT7_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2574,6 +2702,7 @@ static struct clk gpt6_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT6_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2583,6 +2712,7 @@ static struct clk gpt5_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT5_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2592,6 +2722,7 @@ static struct clk gpt4_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2601,6 +2732,7 @@ static struct clk gpt3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2610,6 +2742,7 @@ static struct clk gpt2_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_GPT2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2620,6 +2753,7 @@ static struct clk mcbsp2_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2630,6 +2764,7 @@ static struct clk mcbsp3_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; @@ -2640,12 +2775,13 @@ static struct clk mcbsp4_ick = { .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &followparent_recalc, }; static const struct clksel mcbsp_234_clksel[] = { { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent = NULL } }; @@ -2659,6 +2795,7 @@ static struct clk mcbsp2_fck = { .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, .clksel = mcbsp_234_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2672,6 +2809,7 @@ static struct clk mcbsp3_fck = { .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, .clksel = mcbsp_234_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2685,6 +2823,7 @@ static struct clk mcbsp4_fck = { .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, .clksel = mcbsp_234_clksel, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "per_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2732,6 +2871,7 @@ static struct clk emu_src_ck = { .clksel_mask = OMAP3430_MUX_CTRL_MASK, .clksel = emu_src_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2755,6 +2895,7 @@ static struct clk pclk_fck = { .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, .clksel = pclk_emu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2777,6 +2918,7 @@ static struct clk pclkx2_fck = { .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, .clksel = pclkx2_emu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2792,6 +2934,7 @@ static struct clk atclk_fck = { .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, .clksel = atclk_emu_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2802,6 +2945,7 @@ static struct clk traceclk_src_fck = { .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, .clksel = emu_src_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2824,6 +2968,7 @@ static struct clk traceclk_fck = { .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, .clksel = traceclk_clksel, .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED, + .clkdm_name = "emu_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -2853,11 +2998,13 @@ static struct clk sr_l4_ick = { .name = "sr_l4_ick", .parent = &l4_ick, .flags = CLOCK_IN_OMAP343X, + .clkdm_name = "core_l4_clkdm", .recalc = &followparent_recalc, }; /* SECURE_32K_FCK clocks */ +/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .parent = &secure_32k_fck, @@ -2933,6 +3080,7 @@ static struct clk *onchip_34xx_clks[] __initdata = { &l3_ick, &l4_ick, &rm_ick, + &gfx_l3_ck, &gfx_l3_fck, &gfx_l3_ick, &gfx_cg1_ck, @@ -3014,12 +3162,10 @@ static struct clk *onchip_34xx_clks[] __initdata = { &dss2_alwon_fck, &dss_ick, &cam_mclk, - &cam_l3_ick, - &cam_l4_ick, + &cam_ick, &usbhost_120m_fck, &usbhost_48m_fck, - &usbhost_l3_ick, - &usbhost_l4_ick, + &usbhost_ick, &usbhost_sar_fck, &usim_fck, &gpt1_fck, diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c new file mode 100644 index 000000000000..4c3ce9cfd948 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain.c @@ -0,0 +1,623 @@ +/* + * OMAP2/3 clockdomain framework functions + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley and Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN +# define DEBUG +#endif + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/limits.h> + +#include <linux/io.h> + +#include <linux/bitops.h> + +#include <mach/clock.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" + +#include <mach/powerdomain.h> +#include <mach/clockdomain.h> + +/* clkdm_list contains all registered struct clockdomains */ +static LIST_HEAD(clkdm_list); + +/* clkdm_mutex protects clkdm_list add and del ops */ +static DEFINE_MUTEX(clkdm_mutex); + +/* array of powerdomain deps to be added/removed when clkdm in hwsup mode */ +static struct clkdm_pwrdm_autodep *autodeps; + + +/* Private functions */ + +/* + * _autodep_lookup - resolve autodep pwrdm names to pwrdm pointers; store + * @autodep: struct clkdm_pwrdm_autodep * to resolve + * + * Resolve autodep powerdomain names to powerdomain pointers via + * pwrdm_lookup() and store the pointers in the autodep structure. An + * "autodep" is a powerdomain sleep/wakeup dependency that is + * automatically added and removed whenever clocks in the associated + * clockdomain are enabled or disabled (respectively) when the + * clockdomain is in hardware-supervised mode. Meant to be called + * once at clockdomain layer initialization, since these should remain + * fixed for a particular architecture. No return value. + */ +static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep) +{ + struct powerdomain *pwrdm; + + if (!autodep) + return; + + if (!omap_chip_is(autodep->omap_chip)) + return; + + pwrdm = pwrdm_lookup(autodep->pwrdm_name); + if (!pwrdm) { + pr_debug("clockdomain: _autodep_lookup: powerdomain %s " + "does not exist\n", autodep->pwrdm_name); + WARN_ON(1); + return; + } + autodep->pwrdm = pwrdm; + + return; +} + +/* + * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable + * @clkdm: struct clockdomain * + * + * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm' + * in hardware-supervised mode. Meant to be called from clock framework + * when a clock inside clockdomain 'clkdm' is enabled. No return value. + */ +static void _clkdm_add_autodeps(struct clockdomain *clkdm) +{ + struct clkdm_pwrdm_autodep *autodep; + + for (autodep = autodeps; autodep->pwrdm_name; autodep++) { + if (!autodep->pwrdm) + continue; + + pr_debug("clockdomain: adding %s sleepdep/wkdep for " + "pwrdm %s\n", autodep->pwrdm_name, + clkdm->pwrdm->name); + + pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm); + } +} + +/* + * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm + * @clkdm: struct clockdomain * + * + * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm' + * in hardware-supervised mode. Meant to be called from clock framework + * when a clock inside clockdomain 'clkdm' is disabled. No return value. + */ +static void _clkdm_del_autodeps(struct clockdomain *clkdm) +{ + struct clkdm_pwrdm_autodep *autodep; + + for (autodep = autodeps; autodep->pwrdm_name; autodep++) { + if (!autodep->pwrdm) + continue; + + pr_debug("clockdomain: removing %s sleepdep/wkdep for " + "pwrdm %s\n", autodep->pwrdm_name, + clkdm->pwrdm->name); + + pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm); + pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm); + } +} + + +static struct clockdomain *_clkdm_lookup(const char *name) +{ + struct clockdomain *clkdm, *temp_clkdm; + + if (!name) + return NULL; + + clkdm = NULL; + + list_for_each_entry(temp_clkdm, &clkdm_list, node) { + if (!strcmp(name, temp_clkdm->name)) { + clkdm = temp_clkdm; + break; + } + } + + return clkdm; +} + + +/* Public functions */ + +/** + * clkdm_init - set up the clockdomain layer + * @clkdms: optional pointer to an array of clockdomains to register + * @init_autodeps: optional pointer to an array of autodeps to register + * + * Set up internal state. If a pointer to an array of clockdomains + * was supplied, loop through the list of clockdomains, register all + * that are available on the current platform. Similarly, if a + * pointer to an array of clockdomain-powerdomain autodependencies was + * provided, register those. No return value. + */ +void clkdm_init(struct clockdomain **clkdms, + struct clkdm_pwrdm_autodep *init_autodeps) +{ + struct clockdomain **c = NULL; + struct clkdm_pwrdm_autodep *autodep = NULL; + + if (clkdms) + for (c = clkdms; *c; c++) + clkdm_register(*c); + + autodeps = init_autodeps; + if (autodeps) + for (autodep = autodeps; autodep->pwrdm_name; autodep++) + _autodep_lookup(autodep); +} + +/** + * clkdm_register - register a clockdomain + * @clkdm: struct clockdomain * to register + * + * Adds a clockdomain to the internal clockdomain list. + * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is + * already registered by the provided name, or 0 upon success. + */ +int clkdm_register(struct clockdomain *clkdm) +{ + int ret = -EINVAL; + struct powerdomain *pwrdm; + + if (!clkdm || !clkdm->name) + return -EINVAL; + + if (!omap_chip_is(clkdm->omap_chip)) + return -EINVAL; + + pwrdm = pwrdm_lookup(clkdm->pwrdm_name); + if (!pwrdm) { + pr_debug("clockdomain: clkdm_register %s: powerdomain %s " + "does not exist\n", clkdm->name, clkdm->pwrdm_name); + return -EINVAL; + } + clkdm->pwrdm = pwrdm; + + mutex_lock(&clkdm_mutex); + /* Verify that the clockdomain is not already registered */ + if (_clkdm_lookup(clkdm->name)) { + ret = -EEXIST; + goto cr_unlock; + }; + + list_add(&clkdm->node, &clkdm_list); + + pwrdm_add_clkdm(pwrdm, clkdm); + + pr_debug("clockdomain: registered %s\n", clkdm->name); + ret = 0; + +cr_unlock: + mutex_unlock(&clkdm_mutex); + + return ret; +} + +/** + * clkdm_unregister - unregister a clockdomain + * @clkdm: struct clockdomain * to unregister + * + * Removes a clockdomain from the internal clockdomain list. Returns + * -EINVAL if clkdm argument is NULL. + */ +int clkdm_unregister(struct clockdomain *clkdm) +{ + if (!clkdm) + return -EINVAL; + + pwrdm_del_clkdm(clkdm->pwrdm, clkdm); + + mutex_lock(&clkdm_mutex); + list_del(&clkdm->node); + mutex_unlock(&clkdm_mutex); + + pr_debug("clockdomain: unregistered %s\n", clkdm->name); + + return 0; +} + +/** + * clkdm_lookup - look up a clockdomain by name, return a pointer + * @name: name of clockdomain + * + * Find a registered clockdomain by its name. Returns a pointer to the + * struct clockdomain if found, or NULL otherwise. + */ +struct clockdomain *clkdm_lookup(const char *name) +{ + struct clockdomain *clkdm, *temp_clkdm; + + if (!name) + return NULL; + + clkdm = NULL; + + mutex_lock(&clkdm_mutex); + list_for_each_entry(temp_clkdm, &clkdm_list, node) { + if (!strcmp(name, temp_clkdm->name)) { + clkdm = temp_clkdm; + break; + } + } + mutex_unlock(&clkdm_mutex); + + return clkdm; +} + +/** + * clkdm_for_each - call function on each registered clockdomain + * @fn: callback function * + * + * Call the supplied function for each registered clockdomain. + * The callback function can return anything but 0 to bail + * out early from the iterator. The callback function is called with + * the clkdm_mutex held, so no clockdomain structure manipulation + * functions should be called from the callback, although hardware + * clockdomain control functions are fine. Returns the last return + * value of the callback function, which should be 0 for success or + * anything else to indicate failure; or -EINVAL if the function pointer + * is null. + */ +int clkdm_for_each(int (*fn)(struct clockdomain *clkdm)) +{ + struct clockdomain *clkdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + mutex_lock(&clkdm_mutex); + list_for_each_entry(clkdm, &clkdm_list, node) { + ret = (*fn)(clkdm); + if (ret) + break; + } + mutex_unlock(&clkdm_mutex); + + return ret; +} + + +/** + * clkdm_get_pwrdm - return a ptr to the pwrdm that this clkdm resides in + * @clkdm: struct clockdomain * + * + * Return a pointer to the struct powerdomain that the specified clockdomain + * 'clkdm' exists in, or returns NULL if clkdm argument is NULL. + */ +struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm) +{ + if (!clkdm) + return NULL; + + return clkdm->pwrdm; +} + + +/* Hardware clockdomain control */ + +/** + * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode + * @clk: struct clk * of a clockdomain + * + * Return the clockdomain's current state transition mode from the + * corresponding domain CM_CLKSTCTRL register. Returns -EINVAL if clk + * is NULL or the current mode upon success. + */ +static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm) +{ + u32 v; + + if (!clkdm) + return -EINVAL; + + v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + v &= clkdm->clktrctrl_mask; + v >>= __ffs(clkdm->clktrctrl_mask); + + return v; +} + +/** + * omap2_clkdm_sleep - force clockdomain sleep transition + * @clkdm: struct clockdomain * + * + * Instruct the CM to force a sleep transition on the specified + * clockdomain 'clkdm'. Returns -EINVAL if clk is NULL or if + * clockdomain does not support software-initiated sleep; 0 upon + * success. + */ +int omap2_clkdm_sleep(struct clockdomain *clkdm) +{ + if (!clkdm) + return -EINVAL; + + if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + pr_debug("clockdomain: %s does not support forcing " + "sleep via software\n", clkdm->name); + return -EINVAL; + } + + pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name); + + if (cpu_is_omap24xx()) { + + cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, + clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + + } else if (cpu_is_omap34xx()) { + + u32 v = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP << + __ffs(clkdm->clktrctrl_mask)); + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, + clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + + } else { + BUG(); + }; + + return 0; +} + +/** + * omap2_clkdm_wakeup - force clockdomain wakeup transition + * @clkdm: struct clockdomain * + * + * Instruct the CM to force a wakeup transition on the specified + * clockdomain 'clkdm'. Returns -EINVAL if clkdm is NULL or if the + * clockdomain does not support software-controlled wakeup; 0 upon + * success. + */ +int omap2_clkdm_wakeup(struct clockdomain *clkdm) +{ + if (!clkdm) + return -EINVAL; + + if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + pr_debug("clockdomain: %s does not support forcing " + "wakeup via software\n", clkdm->name); + return -EINVAL; + } + + pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name); + + if (cpu_is_omap24xx()) { + + cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, + clkdm->pwrdm->prcm_offs, PM_PWSTCTRL); + + } else if (cpu_is_omap34xx()) { + + u32 v = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP << + __ffs(clkdm->clktrctrl_mask)); + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v, + clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + + } else { + BUG(); + }; + + return 0; +} + +/** + * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Allow the hardware to automatically switch the clockdomain into + * active or idle states, as needed by downstream clocks. If the + * clockdomain has any downstream clocks enabled in the clock + * framework, wkdep/sleepdep autodependencies are added; this is so + * device drivers can read and write to the device. No return value. + */ +void omap2_clkdm_allow_idle(struct clockdomain *clkdm) +{ + u32 v; + + if (!clkdm) + return; + + if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) { + pr_debug("clock: automatic idle transitions cannot be enabled " + "on clockdomain %s\n", clkdm->name); + return; + } + + pr_debug("clockdomain: enabling automatic idle transitions for %s\n", + clkdm->name); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + if (cpu_is_omap24xx()) + v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; + else if (cpu_is_omap34xx()) + v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; + else + BUG(); + + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, + v << __ffs(clkdm->clktrctrl_mask), + clkdm->pwrdm->prcm_offs, + CM_CLKSTCTRL); +} + +/** + * omap2_clkdm_deny_idle - disable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Prevent the hardware from automatically switching the clockdomain + * into inactive or idle states. If the clockdomain has downstream + * clocks enabled in the clock framework, wkdep/sleepdep + * autodependencies are removed. No return value. + */ +void omap2_clkdm_deny_idle(struct clockdomain *clkdm) +{ + u32 v; + + if (!clkdm) + return; + + if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) { + pr_debug("clockdomain: automatic idle transitions cannot be " + "disabled on %s\n", clkdm->name); + return; + } + + pr_debug("clockdomain: disabling automatic idle transitions for %s\n", + clkdm->name); + + if (cpu_is_omap24xx()) + v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; + else if (cpu_is_omap34xx()) + v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO; + else + BUG(); + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, + v << __ffs(clkdm->clktrctrl_mask), + clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + + +/* Clockdomain-to-clock framework interface code */ + +/** + * omap2_clkdm_clk_enable - add an enabled downstream clock to this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the enabled downstream clock + * + * Increment the usecount of this clockdomain 'clkdm' and ensure that + * it is awake. Intended to be called by clk_enable() code. If the + * clockdomain is in software-supervised idle mode, force the + * clockdomain to wake. If the clockdomain is in hardware-supervised + * idle mode, add clkdm-pwrdm autodependencies, to ensure that devices + * in the clockdomain can be read from/written to by on-chip processors. + * Returns -EINVAL if passed null pointers; returns 0 upon success or + * if the clockdomain is in hwsup idle mode. + */ +int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) +{ + int v; + + /* + * XXX Rewrite this code to maintain a list of enabled + * downstream clocks for debugging purposes? + */ + + if (!clkdm || !clk) + return -EINVAL; + + if (atomic_inc_return(&clkdm->usecount) > 1) + return 0; + + /* Clockdomain now has one enabled downstream clock */ + + pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name, + clk->name); + + v = omap2_clkdm_clktrctrl_read(clkdm); + + if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) || + (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) + _clkdm_add_autodeps(clkdm); + else + omap2_clkdm_wakeup(clkdm); + + return 0; +} + +/** + * omap2_clkdm_clk_disable - remove an enabled downstream clock from this clkdm + * @clkdm: struct clockdomain * + * @clk: struct clk * of the disabled downstream clock + * + * Decrement the usecount of this clockdomain 'clkdm'. Intended to be + * called by clk_disable() code. If the usecount goes to 0, put the + * clockdomain to sleep (software-supervised mode) or remove the + * clkdm-pwrdm autodependencies (hardware-supervised mode). Returns + * -EINVAL if passed null pointers; -ERANGE if the clkdm usecount + * underflows and debugging is enabled; or returns 0 upon success or + * if the clockdomain is in hwsup idle mode. + */ +int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) +{ + int v; + + /* + * XXX Rewrite this code to maintain a list of enabled + * downstream clocks for debugging purposes? + */ + + if (!clkdm || !clk) + return -EINVAL; + +#ifdef DEBUG + if (atomic_read(&clkdm->usecount) == 0) { + WARN_ON(1); /* underflow */ + return -ERANGE; + } +#endif + + if (atomic_dec_return(&clkdm->usecount) > 0) + return 0; + + /* All downstream clocks of this clockdomain are now disabled */ + + pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name, + clk->name); + + v = omap2_clkdm_clktrctrl_read(clkdm); + + if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) || + (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) + _clkdm_del_autodeps(clkdm); + else + omap2_clkdm_sleep(clkdm); + + return 0; +} + diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h new file mode 100644 index 000000000000..cd86dcc7b424 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains.h @@ -0,0 +1,305 @@ +/* + * OMAP2/3 clockdomains + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H +#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H + +#include <mach/clockdomain.h> + +/* + * OMAP2/3-common clockdomains + */ + +/* This is an implicit clockdomain - it is never defined as such in TRM */ +static struct clockdomain wkup_clkdm = { + .name = "wkup_clkdm", + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), +}; + +/* + * 2420-only clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP2420) + +static struct clockdomain mpu_2420_clkdm = { + .name = "mpu_clkdm", + .pwrdm_name = "mpu_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +static struct clockdomain iva1_2420_clkdm = { + .name = "iva1_clkdm", + .pwrdm_name = "dsp_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +#endif /* CONFIG_ARCH_OMAP2420 */ + + +/* + * 2430-only clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP2430) + +static struct clockdomain mpu_2430_clkdm = { + .name = "mpu_clkdm", + .pwrdm_name = "mpu_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +static struct clockdomain mdm_clkdm = { + .name = "mdm_clkdm", + .pwrdm_name = "mdm_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +#endif /* CONFIG_ARCH_OMAP2430 */ + + +/* + * 24XX-only clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP24XX) + +static struct clockdomain dsp_clkdm = { + .name = "dsp_clkdm", + .pwrdm_name = "dsp_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain gfx_24xx_clkdm = { + .name = "gfx_clkdm", + .pwrdm_name = "gfx_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain core_l3_24xx_clkdm = { + .name = "core_l3_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain core_l4_24xx_clkdm = { + .name = "core_l4_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +static struct clockdomain dss_24xx_clkdm = { + .name = "dss_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), +}; + +#endif /* CONFIG_ARCH_OMAP24XX */ + + +/* + * 34xx clockdomains + */ + +#if defined(CONFIG_ARCH_OMAP34XX) + +static struct clockdomain mpu_34xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm_name = "mpu_pwrdm", + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain neon_clkdm = { + .name = "neon_clkdm", + .pwrdm_name = "neon_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain iva2_clkdm = { + .name = "iva2_clkdm", + .pwrdm_name = "iva2_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain gfx_3430es1_clkdm = { + .name = "gfx_clkdm", + .pwrdm_name = "gfx_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), +}; + +static struct clockdomain sgx_clkdm = { + .name = "sgx_clkdm", + .pwrdm_name = "sgx_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), +}; + +/* + * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but + * then that information was removed from the 34xx ES2+ TRM. It is + * unclear whether the core is still there, but the clockdomain logic + * is there, and must be programmed to an appropriate state if the + * CORE clockdomain is to become inactive. + */ +static struct clockdomain d2d_clkdm = { + .name = "d2d_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain core_l3_34xx_clkdm = { + .name = "core_l3_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain core_l4_34xx_clkdm = { + .name = "core_l4_clkdm", + .pwrdm_name = "core_pwrdm", + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain dss_34xx_clkdm = { + .name = "dss_clkdm", + .pwrdm_name = "dss_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain cam_clkdm = { + .name = "cam_clkdm", + .pwrdm_name = "cam_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain usbhost_clkdm = { + .name = "usbhost_clkdm", + .pwrdm_name = "usbhost_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), +}; + +static struct clockdomain per_clkdm = { + .name = "per_clkdm", + .pwrdm_name = "per_pwrdm", + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct clockdomain emu_clkdm = { + .name = "emu_clkdm", + .pwrdm_name = "emu_pwrdm", + .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +#endif /* CONFIG_ARCH_OMAP34XX */ + +/* + * Clockdomain-powerdomain hwsup dependencies (34XX only) + */ + +static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL } +}; + +/* + * + */ + +static struct clockdomain *clockdomains_omap[] = { + + &wkup_clkdm, + +#ifdef CONFIG_ARCH_OMAP2420 + &mpu_2420_clkdm, + &iva1_2420_clkdm, +#endif + +#ifdef CONFIG_ARCH_OMAP2430 + &mpu_2430_clkdm, + &mdm_clkdm, +#endif + +#ifdef CONFIG_ARCH_OMAP24XX + &dsp_clkdm, + &gfx_24xx_clkdm, + &core_l3_24xx_clkdm, + &core_l4_24xx_clkdm, + &dss_24xx_clkdm, +#endif + +#ifdef CONFIG_ARCH_OMAP34XX + &mpu_34xx_clkdm, + &neon_clkdm, + &iva2_clkdm, + &gfx_3430es1_clkdm, + &sgx_clkdm, + &d2d_clkdm, + &core_l3_34xx_clkdm, + &core_l4_34xx_clkdm, + &dss_34xx_clkdm, + &cam_clkdm, + &usbhost_clkdm, + &per_clkdm, + &emu_clkdm, +#endif + + NULL, +}; + +#endif diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 20ac38100678..1098ecfab861 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -63,7 +63,8 @@ #define OMAP24XX_CLKSEL_MPU_MASK (0x1f << 0) /* CM_CLKSTCTRL_MPU */ -#define OMAP24XX_AUTOSTATE_MPU (1 << 0) +#define OMAP24XX_AUTOSTATE_MPU_SHIFT 0 +#define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits*/ #define OMAP24XX_EN_TV_SHIFT 2 @@ -238,9 +239,12 @@ #define OMAP24XX_CLKSEL_GPT2_MASK (0x3 << 2) /* CM_CLKSTCTRL_CORE */ -#define OMAP24XX_AUTOSTATE_DSS (1 << 2) -#define OMAP24XX_AUTOSTATE_L4 (1 << 1) -#define OMAP24XX_AUTOSTATE_L3 (1 << 0) +#define OMAP24XX_AUTOSTATE_DSS_SHIFT 2 +#define OMAP24XX_AUTOSTATE_DSS_MASK (1 << 2) +#define OMAP24XX_AUTOSTATE_L4_SHIFT 1 +#define OMAP24XX_AUTOSTATE_L4_MASK (1 << 1) +#define OMAP24XX_AUTOSTATE_L3_SHIFT 0 +#define OMAP24XX_AUTOSTATE_L3_MASK (1 << 0) /* CM_FCLKEN_GFX */ #define OMAP24XX_EN_3D_SHIFT 2 @@ -255,7 +259,8 @@ /* CM_CLKSEL_GFX specific bits */ /* CM_CLKSTCTRL_GFX */ -#define OMAP24XX_AUTOSTATE_GFX (1 << 0) +#define OMAP24XX_AUTOSTATE_GFX_SHIFT 0 +#define OMAP24XX_AUTOSTATE_GFX_MASK (1 << 0) /* CM_FCLKEN_WKUP specific bits */ @@ -367,8 +372,10 @@ #define OMAP24XX_CLKSEL_DSP_MASK (0x1f << 0) /* CM_CLKSTCTRL_DSP */ -#define OMAP2420_AUTOSTATE_IVA (1 << 8) -#define OMAP24XX_AUTOSTATE_DSP (1 << 0) +#define OMAP2420_AUTOSTATE_IVA_SHIFT 8 +#define OMAP2420_AUTOSTATE_IVA_MASK (1 << 8) +#define OMAP24XX_AUTOSTATE_DSP_SHIFT 0 +#define OMAP24XX_AUTOSTATE_DSP_MASK (1 << 0) /* CM_FCLKEN_MDM */ /* 2430 only */ @@ -396,6 +403,7 @@ /* CM_CLKSTCTRL_MDM */ /* 2430 only */ -#define OMAP2430_AUTOSTATE_MDM (1 << 0) +#define OMAP2430_AUTOSTATE_MDM_SHIFT 0 +#define OMAP2430_AUTOSTATE_MDM_MASK (1 << 0) #endif diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index ee4c0ca1a708..219f5c8d9659 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -96,7 +96,8 @@ #define OMAP3430_CLKTRCTRL_IVA2_MASK (0x3 << 0) /* CM_CLKSTST_IVA2 */ -#define OMAP3430_CLKACTIVITY_IVA2 (1 << 0) +#define OMAP3430_CLKACTIVITY_IVA2_SHIFT 0 +#define OMAP3430_CLKACTIVITY_IVA2_MASK (1 << 0) /* CM_REVISION specific bits */ @@ -140,7 +141,8 @@ #define OMAP3430_CLKTRCTRL_MPU_MASK (0x3 << 0) /* CM_CLKSTST_MPU */ -#define OMAP3430_CLKACTIVITY_MPU (1 << 0) +#define OMAP3430_CLKACTIVITY_MPU_SHIFT 0 +#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ @@ -300,9 +302,12 @@ #define OMAP3430_CLKTRCTRL_L3_MASK (0x3 << 0) /* CM_CLKSTST_CORE */ -#define OMAP3430ES1_CLKACTIVITY_D2D (1 << 2) -#define OMAP3430_CLKACTIVITY_L4 (1 << 1) -#define OMAP3430_CLKACTIVITY_L3 (1 << 0) +#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT 2 +#define OMAP3430ES1_CLKACTIVITY_D2D_MASK (1 << 2) +#define OMAP3430_CLKACTIVITY_L4_SHIFT 1 +#define OMAP3430_CLKACTIVITY_L4_MASK (1 << 1) +#define OMAP3430_CLKACTIVITY_L3_SHIFT 0 +#define OMAP3430_CLKACTIVITY_L3_MASK (1 << 0) /* CM_FCLKEN_GFX */ #define OMAP3430ES1_EN_3D (1 << 2) @@ -323,7 +328,8 @@ #define OMAP3430ES1_CLKTRCTRL_GFX_MASK (0x3 << 0) /* CM_CLKSTST_GFX */ -#define OMAP3430ES1_CLKACTIVITY_GFX (1 << 0) +#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT 0 +#define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0) /* CM_FCLKEN_SGX */ #define OMAP3430ES2_EN_SGX_SHIFT 1 @@ -333,6 +339,14 @@ #define OMAP3430ES2_CLKSEL_SGX_SHIFT 0 #define OMAP3430ES2_CLKSEL_SGX_MASK (0x7 << 0) +/* CM_CLKSTCTRL_SGX */ +#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT 0 +#define OMAP3430ES2_CLKTRCTRL_SGX_MASK (0x3 << 0) + +/* CM_CLKSTST_SGX */ +#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT 0 +#define OMAP3430ES2_CLKACTIVITY_SGX_MASK (1 << 0) + /* CM_FCLKEN_WKUP specific bits */ #define OMAP3430ES2_EN_USIMOCP_SHIFT 9 @@ -498,7 +512,8 @@ #define OMAP3430_CLKTRCTRL_DSS_MASK (0x3 << 0) /* CM_CLKSTST_DSS */ -#define OMAP3430_CLKACTIVITY_DSS (1 << 0) +#define OMAP3430_CLKACTIVITY_DSS_SHIFT 0 +#define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0) /* CM_FCLKEN_CAM specific bits */ @@ -522,7 +537,8 @@ #define OMAP3430_CLKTRCTRL_CAM_MASK (0x3 << 0) /* CM_CLKSTST_CAM */ -#define OMAP3430_CLKACTIVITY_CAM (1 << 0) +#define OMAP3430_CLKACTIVITY_CAM_SHIFT 0 +#define OMAP3430_CLKACTIVITY_CAM_MASK (1 << 0) /* CM_FCLKEN_PER specific bits */ @@ -598,7 +614,8 @@ #define OMAP3430_CLKTRCTRL_PER_MASK (0x3 << 0) /* CM_CLKSTST_PER */ -#define OMAP3430_CLKACTIVITY_PER (1 << 0) +#define OMAP3430_CLKACTIVITY_PER_SHIFT 0 +#define OMAP3430_CLKACTIVITY_PER_MASK (1 << 0) /* CM_CLKSEL1_EMU */ #define OMAP3430_DIV_DPLL4_SHIFT 24 @@ -623,7 +640,8 @@ #define OMAP3430_CLKTRCTRL_EMU_MASK (0x3 << 0) /* CM_CLKSTST_EMU */ -#define OMAP3430_CLKACTIVITY_EMU (1 << 0) +#define OMAP3430_CLKACTIVITY_EMU_SHIFT 0 +#define OMAP3430_CLKACTIVITY_EMU_MASK (1 << 0) /* CM_CLKSEL2_EMU specific bits */ #define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT 8 @@ -673,6 +691,8 @@ #define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT 0 #define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK (3 << 0) - +/* CM_CLKSTST_USBHOST */ +#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT 0 +#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK (1 << 0) #endif diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 87a44c715aa4..65fdf78c91e1 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -18,7 +18,7 @@ #ifndef __ASSEMBLER__ #define OMAP_CM_REGADDR(module, reg) \ - (void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) + IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg)) #else #define OMAP2420_CM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2ee954a0bc7c..90af2ac469aa 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -23,50 +23,7 @@ #include <mach/board.h> #include <mach/mux.h> #include <mach/gpio.h> - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP2_I2C_BASE2 0x48072000 -#define OMAP2_I2C_INT2 57 - -static struct resource i2c_resources2[] = { - { - .start = OMAP2_I2C_BASE2, - .end = OMAP2_I2C_BASE2 + 0x3f, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP2_I2C_INT2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_i2c_device2 = { - .name = "i2c_omap", - .id = 2, - .num_resources = ARRAY_SIZE(i2c_resources2), - .resource = i2c_resources2, -}; - -/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ -static void omap_init_i2c(void) -{ - /* REVISIT: Second I2C not in use on H4? */ - if (machine_is_omap_h4()) - return; - - if (!cpu_is_omap2430()) { - omap_cfg_reg(J15_24XX_I2C2_SCL); - omap_cfg_reg(H19_24XX_I2C2_SDA); - } - (void) platform_device_register(&omap_i2c_device2); -} - -#else - -static void omap_init_i2c(void) {} - -#endif +#include <mach/eac.h> #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) #define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE) @@ -104,7 +61,9 @@ static inline void omap_init_mbox(void) { } #if defined(CONFIG_OMAP_STI) -#define OMAP2_STI_BASE IO_ADDRESS(0x48068000) +#if defined(CONFIG_ARCH_OMAP2) + +#define OMAP2_STI_BASE 0x48068000 #define OMAP2_STI_CHANNEL_BASE 0x54000000 #define OMAP2_STI_IRQ 4 @@ -124,6 +83,25 @@ static struct resource sti_resources[] = { .flags = IORESOURCE_IRQ, } }; +#elif defined(CONFIG_ARCH_OMAP3) + +#define OMAP3_SDTI_BASE 0x54500000 +#define OMAP3_SDTI_CHANNEL_BASE 0x54600000 + +static struct resource sti_resources[] = { + { + .start = OMAP3_SDTI_BASE, + .end = OMAP3_SDTI_BASE + 0xFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3_SDTI_CHANNEL_BASE, + .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + } +}; + +#endif static struct platform_device sti_device = { .name = "sti", @@ -140,12 +118,14 @@ static inline void omap_init_sti(void) static inline void omap_init_sti(void) {} #endif -#if defined(CONFIG_SPI_OMAP24XX) +#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <mach/mcspi.h> #define OMAP2_MCSPI1_BASE 0x48098000 #define OMAP2_MCSPI2_BASE 0x4809a000 +#define OMAP2_MCSPI3_BASE 0x480b8000 +#define OMAP2_MCSPI4_BASE 0x480ba000 static struct omap2_mcspi_platform_config omap2_mcspi1_config = { .num_cs = 4, @@ -159,7 +139,7 @@ static struct resource omap2_mcspi1_resources[] = { }, }; -struct platform_device omap2_mcspi1 = { +static struct platform_device omap2_mcspi1 = { .name = "omap2_mcspi", .id = 1, .num_resources = ARRAY_SIZE(omap2_mcspi1_resources), @@ -181,7 +161,7 @@ static struct resource omap2_mcspi2_resources[] = { }, }; -struct platform_device omap2_mcspi2 = { +static struct platform_device omap2_mcspi2 = { .name = "omap2_mcspi", .id = 2, .num_resources = ARRAY_SIZE(omap2_mcspi2_resources), @@ -191,16 +171,162 @@ struct platform_device omap2_mcspi2 = { }, }; +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) +static struct omap2_mcspi_platform_config omap2_mcspi3_config = { + .num_cs = 2, +}; + +static struct resource omap2_mcspi3_resources[] = { + { + .start = OMAP2_MCSPI3_BASE, + .end = OMAP2_MCSPI3_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap2_mcspi3 = { + .name = "omap2_mcspi", + .id = 3, + .num_resources = ARRAY_SIZE(omap2_mcspi3_resources), + .resource = omap2_mcspi3_resources, + .dev = { + .platform_data = &omap2_mcspi3_config, + }, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap2_mcspi_platform_config omap2_mcspi4_config = { + .num_cs = 1, +}; + +static struct resource omap2_mcspi4_resources[] = { + { + .start = OMAP2_MCSPI4_BASE, + .end = OMAP2_MCSPI4_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap2_mcspi4 = { + .name = "omap2_mcspi", + .id = 4, + .num_resources = ARRAY_SIZE(omap2_mcspi4_resources), + .resource = omap2_mcspi4_resources, + .dev = { + .platform_data = &omap2_mcspi4_config, + }, +}; +#endif + static void omap_init_mcspi(void) { platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) + platform_device_register(&omap2_mcspi3); +#endif +#ifdef CONFIG_ARCH_OMAP3 + platform_device_register(&omap2_mcspi4); +#endif } #else static inline void omap_init_mcspi(void) {} #endif +#ifdef CONFIG_SND_OMAP24XX_EAC + +#define OMAP2_EAC_BASE 0x48090000 + +static struct resource omap2_eac_resources[] = { + { + .start = OMAP2_EAC_BASE, + .end = OMAP2_EAC_BASE + 0x109, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap2_eac_device = { + .name = "omap24xx-eac", + .id = -1, + .num_resources = ARRAY_SIZE(omap2_eac_resources), + .resource = omap2_eac_resources, + .dev = { + .platform_data = NULL, + }, +}; + +void omap_init_eac(struct eac_platform_data *pdata) +{ + omap2_eac_device.dev.platform_data = pdata; + platform_device_register(&omap2_eac_device); +} + +#else +void omap_init_eac(struct eac_platform_data *pdata) {} +#endif + +#ifdef CONFIG_OMAP_SHA1_MD5 +static struct resource sha1_md5_resources[] = { + { + .start = OMAP24XX_SEC_SHA1MD5_BASE, + .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_24XX_SHA1MD5, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device sha1_md5_device = { + .name = "OMAP SHA1/MD5", + .id = -1, + .num_resources = ARRAY_SIZE(sha1_md5_resources), + .resource = sha1_md5_resources, +}; + +static void omap_init_sha1_md5(void) +{ + platform_device_register(&sha1_md5_device); +} +#else +static inline void omap_init_sha1_md5(void) { } +#endif + +#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) +#define OMAP_HDQ_BASE 0x480B2000 +#endif +static struct resource omap_hdq_resources[] = { + { + .start = OMAP_HDQ_BASE, + .end = OMAP_HDQ_BASE + 0x1C, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_24XX_HDQ_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; +static struct platform_device omap_hdq_dev = { + .name = "omap_hdq", + .id = 0, + .dev = { + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(omap_hdq_resources), + .resource = omap_hdq_resources, +}; +static inline void omap_hdq_init(void) +{ + (void) platform_device_register(&omap_hdq_dev); +} +#else +static inline void omap_hdq_init(void) {} +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -208,10 +334,11 @@ static int __init omap2_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_i2c(); omap_init_mbox(); omap_init_mcspi(); + omap_hdq_init(); omap_init_sti(); + omap_init_sha1_md5(); return 0; } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index af1081a0b27c..763bdbeaf681 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -9,6 +9,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#undef DEBUG + #include <linux/kernel.h> #include <linux/init.h> #include <linux/err.h> @@ -16,20 +18,14 @@ #include <linux/ioport.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/module.h> #include <asm/mach-types.h> #include <mach/gpmc.h> -#undef DEBUG - -#ifdef CONFIG_ARCH_OMAP2420 -#define GPMC_BASE 0x6800a000 -#endif - -#ifdef CONFIG_ARCH_OMAP2430 -#define GPMC_BASE 0x6E000000 -#endif +#include <mach/sdrc.h> +/* GPMC register offsets */ #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 #define GPMC_SYSSTATUS 0x14 @@ -51,7 +47,6 @@ #define GPMC_CS0 0x60 #define GPMC_CS_SIZE 0x30 -#define GPMC_CS_NUM 8 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF #define BOOT_ROM_SPACE 0x100000 /* 1MB */ @@ -64,12 +59,9 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned gpmc_cs_map; -static void __iomem *gpmc_base = - (void __iomem *) IO_ADDRESS(GPMC_BASE); -static void __iomem *gpmc_cs_base = - (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0; +static void __iomem *gpmc_base; -static struct clk *gpmc_fck; +static struct clk *gpmc_l3_clk; static void gpmc_write_reg(int idx, u32 val) { @@ -85,19 +77,32 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; - reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx; + reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; __raw_writel(val, reg_addr); } u32 gpmc_cs_read_reg(int cs, int idx) { - return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx); + void __iomem *reg_addr; + + reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; + return __raw_readl(reg_addr); } +/* TODO: Add support for gpmc_fck to clock framework and use it */ unsigned long gpmc_get_fclk_period(void) { - /* In picoseconds */ - return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000); + unsigned long rate = clk_get_rate(gpmc_l3_clk); + + if (rate == 0) { + printk(KERN_WARNING "gpmc_l3_clk not enabled\n"); + return 0; + } + + rate /= 1000; + rate = 1000000000 / rate; /* In picoseconds */ + + return rate; } unsigned int gpmc_ns_to_ticks(unsigned int time_ns) @@ -110,6 +115,11 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } +unsigned int gpmc_ticks_to_ns(unsigned int ticks) +{ + return ticks * gpmc_get_fclk_period() / 1000; +} + unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) { unsigned long ticks = gpmc_ns_to_ticks(time_ns); @@ -210,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); + if (cpu_is_omap34xx()) { + GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); + } + /* caller is expected to have initialized CONFIG1 to cover * at least sync vs async */ @@ -350,6 +365,7 @@ out: spin_unlock(&gpmc_mem_lock); return r; } +EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { @@ -365,8 +381,9 @@ void gpmc_cs_free(int cs) gpmc_cs_set_reserved(cs, 0); spin_unlock(&gpmc_mem_lock); } +EXPORT_SYMBOL(gpmc_cs_free); -void __init gpmc_mem_init(void) +static void __init gpmc_mem_init(void) { int cs; unsigned long boot_rom_space = 0; @@ -396,12 +413,33 @@ void __init gpmc_mem_init(void) void __init gpmc_init(void) { u32 l; + char *ck; + + if (cpu_is_omap24xx()) { + ck = "core_l3_ck"; + if (cpu_is_omap2420()) + l = OMAP2420_GPMC_BASE; + else + l = OMAP34XX_GPMC_BASE; + } else if (cpu_is_omap34xx()) { + ck = "gpmc_fck"; + l = OMAP34XX_GPMC_BASE; + } - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) - WARN_ON(1); - else - clk_enable(gpmc_fck); + gpmc_l3_clk = clk_get(NULL, ck); + if (IS_ERR(gpmc_l3_clk)) { + printk(KERN_ERR "Could not get GPMC clock %s\n", ck); + return -ENODEV; + } + + gpmc_base = ioremap(l, SZ_4K); + if (!gpmc_base) { + clk_put(gpmc_l3_clk); + printk(KERN_ERR "Could not get GPMC register memory\n"); + return -ENOMEM; + } + + BUG_ON(IS_ERR(gpmc_l3_clk)); l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 209177c7f22f..bf45ff39a7b5 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -18,24 +18,15 @@ #include <asm/cputype.h> +#include <mach/common.h> #include <mach/control.h> #include <mach/cpu.h> -#if defined(CONFIG_ARCH_OMAP2420) -#define TAP_BASE io_p2v(0x48014000) -#elif defined(CONFIG_ARCH_OMAP2430) -#define TAP_BASE io_p2v(0x4900A000) -#elif defined(CONFIG_ARCH_OMAP34XX) -#define TAP_BASE io_p2v(0x4830A000) -#endif +static u32 class; +static void __iomem *tap_base; +static u16 tap_prod_id; #define OMAP_TAP_IDCODE 0x0204 -#if defined(CONFIG_ARCH_OMAP34XX) -#define OMAP_TAP_PROD_ID 0x0210 -#else -#define OMAP_TAP_PROD_ID 0x0208 -#endif - #define OMAP_TAP_DIE_ID_0 0x0218 #define OMAP_TAP_DIE_ID_1 0x021C #define OMAP_TAP_DIE_ID_2 0x0220 @@ -94,18 +85,24 @@ static u32 __init read_tap_reg(int reg) * it means its Cortex r0p0 which is 3430 ES1 */ if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) { + + if (reg == tap_prod_id) { + regval = 0x000F00F0; + goto out; + } + switch (reg) { case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break; /* Making DevType as 0xF in ES1 to differ from ES2 */ - case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break; case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break; case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break; case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break; case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break; } } else - regval = __raw_readl(TAP_BASE + reg); + regval = __raw_readl(tap_base + reg); +out: return regval; } @@ -204,7 +201,7 @@ void __init omap2_check_revision(void) u8 rev; idcode = read_tap_reg(OMAP_TAP_IDCODE); - prod_id = read_tap_reg(OMAP_TAP_PROD_ID); + prod_id = read_tap_reg(tap_prod_id); hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0x0f; dev_type = (prod_id >> 16) & 0x0f; @@ -269,3 +266,13 @@ void __init omap2_check_revision(void) } +void __init omap2_set_globals_tap(struct omap_globals *omap2_globals) +{ + class = omap2_globals->class; + tap_base = omap2_globals->tap; + + if (class == 0x3430) + tap_prod_id = 0x0210; + else + tap_prod_id = 0x0208; +} diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 7c3d6289c05f..5ea64f926ed5 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -4,8 +4,11 @@ * OMAP2 I/O mapping code * * Copyright (C) 2005 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> - * Updated map desc to add 2430 support : <x0khasim@ti.com> + * Copyright (C) 2007 Texas Instruments + * + * Author: + * Juha Yrjola <juha.yrjola@nokia.com> + * Syed Khasim <x0khasim@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,19 +26,26 @@ #include <mach/mux.h> #include <mach/omapfb.h> +#include <mach/sram.h> + +#include "memory.h" + +#include "clock.h" + +#include <mach/powerdomain.h> + +#include "powerdomains.h" -extern void omap_sram_init(void); -extern int omap2_clk_init(void); -extern void omap2_check_revision(void); -extern void omap2_init_memory(void); -extern void gpmc_init(void); -extern void omapfb_reserve_sdram(void); +#include <mach/clockdomain.h> +#include "clockdomains.h" /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -static struct map_desc omap2_io_desc[] __initdata = { + +#ifdef CONFIG_ARCH_OMAP24XX +static struct map_desc omap24xx_io_desc[] __initdata = { { .virtual = L3_24XX_VIRT, .pfn = __phys_to_pfn(L3_24XX_PHYS), @@ -43,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = { .type = MT_DEVICE }, { - .virtual = L4_24XX_VIRT, - .pfn = __phys_to_pfn(L4_24XX_PHYS), - .length = L4_24XX_SIZE, - .type = MT_DEVICE + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE }, +}; + +#ifdef CONFIG_ARCH_OMAP2420 +static struct map_desc omap242x_io_desc[] __initdata = { + { + .virtual = DSP_MEM_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), + .length = DSP_MEM_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = DSP_IPI_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), + .length = DSP_IPI_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = DSP_MMU_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), + .length = DSP_MMU_24XX_SIZE, + .type = MT_DEVICE + }, +}; + +#endif + #ifdef CONFIG_ARCH_OMAP2430 +static struct map_desc omap243x_io_desc[] __initdata = { { .virtual = L4_WK_243X_VIRT, .pfn = __phys_to_pfn(L4_WK_243X_PHYS), @@ -61,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = OMAP243X_GPMC_SIZE, .type = MT_DEVICE }, + { + .virtual = OMAP243X_SDRC_VIRT, + .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS), + .length = OMAP243X_SDRC_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP243X_SMS_VIRT, + .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS), + .length = OMAP243X_SMS_SIZE, + .type = MT_DEVICE + }, +}; +#endif #endif + +#ifdef CONFIG_ARCH_OMAP34XX +static struct map_desc omap34xx_io_desc[] __initdata = { { - .virtual = DSP_MEM_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), - .length = DSP_MEM_24XX_SIZE, + .virtual = L3_34XX_VIRT, + .pfn = __phys_to_pfn(L3_34XX_PHYS), + .length = L3_34XX_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_IPI_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), - .length = DSP_IPI_24XX_SIZE, + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_MMU_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), - .length = DSP_MMU_24XX_SIZE, + .virtual = L4_WK_34XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_34XX_PHYS), + .length = L4_WK_34XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP34XX_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS), + .length = OMAP34XX_GPMC_SIZE, .type = MT_DEVICE - } + }, + { + .virtual = OMAP343X_SMS_VIRT, + .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS), + .length = OMAP343X_SMS_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP343X_SDRC_VIRT, + .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS), + .length = OMAP343X_SDRC_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_PER_34XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_34XX_PHYS), + .length = L4_PER_34XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_EMU_34XX_VIRT, + .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS), + .length = L4_EMU_34XX_SIZE, + .type = MT_DEVICE + }, }; +#endif void __init omap2_map_common_io(void) { - iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); +#if defined(CONFIG_ARCH_OMAP2420) + iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); + iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); +#endif + +#if defined(CONFIG_ARCH_OMAP2430) + iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); + iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); +#endif + +#if defined(CONFIG_ARCH_OMAP34XX) + iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); +#endif /* Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU @@ -101,12 +198,9 @@ void __init omap2_map_common_io(void) void __init omap2_init_common_hw(void) { omap2_mux_init(); + pwrdm_init(powerdomains_omap); + clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); -/* - * Need to Fix this for 2430 - */ -#ifndef CONFIG_ARCH_OMAP2430 omap2_init_memory(); -#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 196a9565a8dc..d354e0fe4477 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -16,14 +16,20 @@ #include <linux/io.h> #include <mach/hardware.h> #include <asm/mach/irq.h> -#include <asm/irq.h> -#define INTC_REVISION 0x0000 -#define INTC_SYSCONFIG 0x0010 -#define INTC_SYSSTATUS 0x0014 -#define INTC_CONTROL 0x0048 -#define INTC_MIR_CLEAR0 0x0088 -#define INTC_MIR_SET0 0x008c + +/* selected INTC register offsets */ + +#define INTC_REVISION 0x0000 +#define INTC_SYSCONFIG 0x0010 +#define INTC_SYSSTATUS 0x0014 +#define INTC_CONTROL 0x0048 +#define INTC_MIR_CLEAR0 0x0088 +#define INTC_MIR_SET0 0x008c +#define INTC_PENDING_IRQ0 0x0098 + +/* Number of IRQ state bits in each MIR register */ +#define IRQ_BITS_PER_REG 32 /* * OMAP2 has a number of different interrupt controllers, each interrupt @@ -32,48 +38,50 @@ * for each bank.. when in doubt, consult the TRM. */ static struct omap_irq_bank { - unsigned long base_reg; + void __iomem *base_reg; unsigned int nr_irqs; } __attribute__ ((aligned(4))) irq_banks[] = { { /* MPU INTC */ - .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE), + .base_reg = 0, .nr_irqs = 96, - }, { - /* XXX: DSP INTC */ - } + }, }; +/* INTC bank register get/set */ + +static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) +{ + __raw_writel(val, bank->base_reg + reg); +} + +static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) +{ + return __raw_readl(bank->base_reg + reg); +} + /* XXX: FIQ and additional INTC support (only MPU at the moment) */ static void omap_ack_irq(unsigned int irq) { - __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); + intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); } static void omap_mask_irq(unsigned int irq) { - int offset = (irq >> 5) << 5; + int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - if (irq >= 64) { - irq %= 64; - } else if (irq >= 32) { - irq %= 32; - } + irq &= (IRQ_BITS_PER_REG - 1); - __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); + intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset); } static void omap_unmask_irq(unsigned int irq) { - int offset = (irq >> 5) << 5; + int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - if (irq >= 64) { - irq %= 64; - } else if (irq >= 32) { - irq %= 32; - } + irq &= (IRQ_BITS_PER_REG - 1); - __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); + intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset); } static void omap_mask_ack_irq(unsigned int irq) @@ -93,20 +101,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) { unsigned long tmp; - tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff; - printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " + tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff; + printk(KERN_INFO "IRQ: Found an INTC at 0x%p " "(revision %ld.%ld) with %d interrupts\n", bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG); + tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG); tmp |= 1 << 1; /* soft reset */ - __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG); - while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1)) /* Wait for reset to complete */; /* Enable autoidle */ - __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG); + intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } void __init omap_init_irq(void) @@ -118,9 +126,10 @@ void __init omap_init_irq(void) for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { struct omap_irq_bank *bank = irq_banks + i; - /* XXX */ - if (!bank->base_reg) - continue; + if (cpu_is_omap24xx()) + bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + else if (cpu_is_omap34xx()) + bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); omap_irq_bank_init_one(bank); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index b261f1f80b5e..cae3ebe249b3 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -89,6 +89,30 @@ static struct mcbsp_internal_clk omap_mcbsp_clks[] = { .disable = omap_mcbsp_clk_disable, }, }, + { + .clk = { + .name = "mcbsp_clk", + .id = 3, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 4, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, + { + .clk = { + .name = "mcbsp_clk", + .id = 5, + .enable = omap_mcbsp_clk_enable, + .disable = omap_mcbsp_clk_disable, + }, + }, }; #define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) @@ -117,25 +141,14 @@ static void omap2_mcbsp_request(unsigned int id) omap2_mcbsp2_mux_setup(); } -static int omap2_mcbsp_check(unsigned int id) -{ - if (id > OMAP_MAX_MCBSP_COUNT - 1) { - printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); - return -ENODEV; - } - return 0; -} - static struct omap_mcbsp_ops omap2_mcbsp_ops = { .request = omap2_mcbsp_request, - .check = omap2_mcbsp_check, }; -#ifdef CONFIG_ARCH_OMAP24XX -static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { +#ifdef CONFIG_ARCH_OMAP2420 +static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { { .phys_base = OMAP24XX_MCBSP1_BASE, - .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, @@ -145,7 +158,6 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { }, { .phys_base = OMAP24XX_MCBSP2_BASE, - .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, @@ -154,17 +166,70 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, }; -#define OMAP24XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap24xx_mcbsp_pdata) +#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) #else -#define omap24xx_mcbsp_pdata NULL -#define OMAP24XX_MCBSP_PDATA_SZ 0 +#define omap2420_mcbsp_pdata NULL +#define OMAP2420_MCBSP_PDATA_SZ 0 +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { + { + .phys_base = OMAP24XX_MCBSP1_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, + .rx_irq = INT_24XX_MCBSP1_IRQ_RX, + .tx_irq = INT_24XX_MCBSP1_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP24XX_MCBSP2_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, + .rx_irq = INT_24XX_MCBSP2_IRQ_RX, + .tx_irq = INT_24XX_MCBSP2_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP2430_MCBSP3_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, + .rx_irq = INT_24XX_MCBSP3_IRQ_RX, + .tx_irq = INT_24XX_MCBSP3_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP2430_MCBSP4_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, + .rx_irq = INT_24XX_MCBSP4_IRQ_RX, + .tx_irq = INT_24XX_MCBSP4_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP2430_MCBSP5_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, + .rx_irq = INT_24XX_MCBSP5_IRQ_RX, + .tx_irq = INT_24XX_MCBSP5_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, +}; +#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) +#else +#define omap2430_mcbsp_pdata NULL +#define OMAP2430_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP34XX static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { { .phys_base = OMAP34XX_MCBSP1_BASE, - .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, @@ -174,7 +239,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { }, { .phys_base = OMAP34XX_MCBSP2_BASE, - .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, @@ -182,6 +246,33 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .ops = &omap2_mcbsp_ops, .clk_name = "mcbsp_clk", }, + { + .phys_base = OMAP34XX_MCBSP3_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, + .rx_irq = INT_24XX_MCBSP3_IRQ_RX, + .tx_irq = INT_24XX_MCBSP3_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP34XX_MCBSP4_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, + .rx_irq = INT_24XX_MCBSP4_IRQ_RX, + .tx_irq = INT_24XX_MCBSP4_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, + { + .phys_base = OMAP34XX_MCBSP5_BASE, + .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, + .rx_irq = INT_24XX_MCBSP5_IRQ_RX, + .tx_irq = INT_24XX_MCBSP5_IRQ_TX, + .ops = &omap2_mcbsp_ops, + .clk_name = "mcbsp_clk", + }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) #else @@ -189,7 +280,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { #define OMAP34XX_MCBSP_PDATA_SZ 0 #endif -int __init omap2_mcbsp_init(void) +static int __init omap2_mcbsp_init(void) { int i; @@ -199,10 +290,24 @@ int __init omap2_mcbsp_init(void) clk_register(&omap_mcbsp_clks[i].clk); } - if (cpu_is_omap24xx()) - omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata, - OMAP24XX_MCBSP_PDATA_SZ); + if (cpu_is_omap2420()) + omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ; + if (cpu_is_omap2430()) + omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ; + if (cpu_is_omap34xx()) + omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ; + + mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), + GFP_KERNEL); + if (!mcbsp_ptr) + return -ENOMEM; + if (cpu_is_omap2420()) + omap_mcbsp_register_board_cfg(omap2420_mcbsp_pdata, + OMAP2420_MCBSP_PDATA_SZ); + if (cpu_is_omap2430()) + omap_mcbsp_register_board_cfg(omap2430_mcbsp_pdata, + OMAP2430_MCBSP_PDATA_SZ); if (cpu_is_omap34xx()) omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata, OMAP34XX_MCBSP_PDATA_SZ); diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index ab1462b02e6e..882c70224292 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -101,6 +101,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) return prev; } +#if !defined(CONFIG_ARCH_OMAP2) +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ +} +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type) +{ +} +#endif + void omap2_init_memory_params(u32 force_lock_to_unlock_mode) { unsigned long dll_cnt; @@ -165,6 +176,9 @@ void __init omap2_init_memory(void) { u32 l; + if (!cpu_is_omap2420()) + return; + l = sms_read_reg(SMS_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h index 9a280b50a893..bb3db80a7c46 100644 --- a/arch/arm/mach-omap2/memory.h +++ b/arch/arm/mach-omap2/memory.h @@ -14,6 +14,9 @@ * published by the Free Software Foundation. */ +#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H +#define ARCH_ARM_MACH_OMAP2_MEMORY_H + /* Memory timings */ #define M_DDR 1 #define M_LOCK_CTRL (1 << 2) @@ -34,3 +37,7 @@ extern u32 omap2_memory_get_fast_dll_ctrl(void); extern u32 omap2_memory_get_type(void); u32 omap2_dll_force_needed(void); u32 omap2_reprogram_sdrc(u32 level, u32 force); +void __init omap2_init_memory(void); +void __init gpmc_init(void); + +#endif diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6b7d672058b9..b1393673d95d 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap2/mux.c * - * OMAP2 pin multiplexing configurations + * OMAP2 and OMAP3 pin multiplexing configurations * * Copyright (C) 2004 - 2008 Texas Instruments Inc. * Copyright (C) 2003 - 2008 Nokia Corporation @@ -220,16 +220,222 @@ MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1) #define OMAP24XX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP24XX */ -#define OMAP24XX_PULL_ENA (1 << 3) -#define OMAP24XX_PULL_UP (1 << 4) +#ifdef CONFIG_ARCH_OMAP34XX +static struct pin_config __initdata_or_module omap34xx_pins[] = { +/* + * Name, reg-offset, + * mux-mode | [active-mode | off-mode] + */ + +/* 34xx I2C */ +MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) + +/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ +MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ +MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* TLL - HSUSB: 12-pin TLL Port 1*/ +MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* TLL - HSUSB: 12-pin TLL Port 2*/ +MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* TLL - HSUSB: 12-pin TLL Port 3*/ +MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) +MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ +MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + +/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ +MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + +/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ +MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + +}; + +#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) + +#else +#define omap34xx_pins NULL +#define OMAP34XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP34XX */ #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) -void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg) +static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; u8 warn = 0, debug = 0; - orig = omap_ctrl_readb(cfg->mux_reg); + if (cpu_is_omap24xx()) + orig = omap_ctrl_readb(cfg->mux_reg); + else + orig = omap_ctrl_readw(cfg->mux_reg); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -255,9 +461,9 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) spin_lock_irqsave(&mux_spin_lock, flags); reg |= cfg->mask & 0x7; if (cfg->pull_val) - reg |= OMAP24XX_PULL_ENA; + reg |= OMAP2_PULL_ENA; if (cfg->pu_pd_val) - reg |= OMAP24XX_PULL_UP; + reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); omap_ctrl_writeb(reg, cfg->mux_reg); spin_unlock_irqrestore(&mux_spin_lock, flags); @@ -265,7 +471,26 @@ int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) return 0; } #else -#define omap24xx_cfg_reg 0 +#define omap24xx_cfg_reg NULL +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) +{ + static DEFINE_SPINLOCK(mux_spin_lock); + unsigned long flags; + u16 reg = 0; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg |= cfg->mux_val; + omap2_cfg_debug(cfg, reg); + omap_ctrl_writew(reg, cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + + return 0; +} +#else +#define omap34xx_cfg_reg NULL #endif int __init omap2_mux_init(void) @@ -274,6 +499,10 @@ int __init omap2_mux_init(void) arch_mux_cfg.pins = omap24xx_pins; arch_mux_cfg.size = OMAP24XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; + } else if (cpu_is_omap34xx()) { + arch_mux_cfg.pins = omap34xx_pins; + arch_mux_cfg.size = OMAP34XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; } return omap_mux_register(&arch_mux_cfg); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c new file mode 100644 index 000000000000..73e2971b1757 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomain.c @@ -0,0 +1,1113 @@ +/* + * OMAP powerdomain control + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN +# define DEBUG +#endif + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <asm/atomic.h> + +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" + +#include <mach/cpu.h> +#include <mach/powerdomain.h> +#include <mach/clockdomain.h> + +/* pwrdm_list contains all registered struct powerdomains */ +static LIST_HEAD(pwrdm_list); + +/* + * pwrdm_rwlock protects pwrdm_list add and del ops - also reused to + * protect pwrdm_clkdms[] during clkdm add/del ops + */ +static DEFINE_RWLOCK(pwrdm_rwlock); + + +/* Private functions */ + +static u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + u32 v; + + v = prm_read_mod_reg(domain, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +static struct powerdomain *_pwrdm_lookup(const char *name) +{ + struct powerdomain *pwrdm, *temp_pwrdm; + + pwrdm = NULL; + + list_for_each_entry(temp_pwrdm, &pwrdm_list, node) { + if (!strcmp(name, temp_pwrdm->name)) { + pwrdm = temp_pwrdm; + break; + } + } + + return pwrdm; +} + +/* _pwrdm_deps_lookup - look up the specified powerdomain in a pwrdm list */ +static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm, + struct pwrdm_dep *deps) +{ + struct pwrdm_dep *pd; + + if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip)) + return ERR_PTR(-EINVAL); + + for (pd = deps; pd; pd++) { + + if (!omap_chip_is(pd->omap_chip)) + continue; + + if (!pd->pwrdm && pd->pwrdm_name) + pd->pwrdm = pwrdm_lookup(pd->pwrdm_name); + + if (pd->pwrdm == pwrdm) + break; + + } + + if (!pd) + return ERR_PTR(-ENOENT); + + return pd->pwrdm; +} + + +/* Public functions */ + +/** + * pwrdm_init - set up the powerdomain layer + * + * Loop through the list of powerdomains, registering all that are + * available on the current CPU. If pwrdm_list is supplied and not + * null, all of the referenced powerdomains will be registered. No + * return value. + */ +void pwrdm_init(struct powerdomain **pwrdm_list) +{ + struct powerdomain **p = NULL; + + if (pwrdm_list) + for (p = pwrdm_list; *p; p++) + pwrdm_register(*p); +} + +/** + * pwrdm_register - register a powerdomain + * @pwrdm: struct powerdomain * to register + * + * Adds a powerdomain to the internal powerdomain list. Returns + * -EINVAL if given a null pointer, -EEXIST if a powerdomain is + * already registered by the provided name, or 0 upon success. + */ +int pwrdm_register(struct powerdomain *pwrdm) +{ + unsigned long flags; + int ret = -EINVAL; + + if (!pwrdm) + return -EINVAL; + + if (!omap_chip_is(pwrdm->omap_chip)) + return -EINVAL; + + write_lock_irqsave(&pwrdm_rwlock, flags); + if (_pwrdm_lookup(pwrdm->name)) { + ret = -EEXIST; + goto pr_unlock; + } + + list_add(&pwrdm->node, &pwrdm_list); + + pr_debug("powerdomain: registered %s\n", pwrdm->name); + ret = 0; + +pr_unlock: + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_unregister - unregister a powerdomain + * @pwrdm: struct powerdomain * to unregister + * + * Removes a powerdomain from the internal powerdomain list. Returns + * -EINVAL if pwrdm argument is NULL. + */ +int pwrdm_unregister(struct powerdomain *pwrdm) +{ + unsigned long flags; + + if (!pwrdm) + return -EINVAL; + + write_lock_irqsave(&pwrdm_rwlock, flags); + list_del(&pwrdm->node); + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + pr_debug("powerdomain: unregistered %s\n", pwrdm->name); + + return 0; +} + +/** + * pwrdm_lookup - look up a powerdomain by name, return a pointer + * @name: name of powerdomain + * + * Find a registered powerdomain by its name. Returns a pointer to the + * struct powerdomain if found, or NULL otherwise. + */ +struct powerdomain *pwrdm_lookup(const char *name) +{ + struct powerdomain *pwrdm; + unsigned long flags; + + if (!name) + return NULL; + + read_lock_irqsave(&pwrdm_rwlock, flags); + pwrdm = _pwrdm_lookup(name); + read_unlock_irqrestore(&pwrdm_rwlock, flags); + + return pwrdm; +} + +/** + * pwrdm_for_each - call function on each registered clockdomain + * @fn: callback function * + * + * Call the supplied function for each registered powerdomain. The + * callback function can return anything but 0 to bail out early from + * the iterator. The callback function is called with the pwrdm_rwlock + * held for reading, so no powerdomain structure manipulation + * functions should be called from the callback, although hardware + * powerdomain control functions are fine. Returns the last return + * value of the callback function, which should be 0 for success or + * anything else to indicate failure; or -EINVAL if the function + * pointer is null. + */ +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)) +{ + struct powerdomain *temp_pwrdm; + unsigned long flags; + int ret = 0; + + if (!fn) + return -EINVAL; + + read_lock_irqsave(&pwrdm_rwlock, flags); + list_for_each_entry(temp_pwrdm, &pwrdm_list, node) { + ret = (*fn)(temp_pwrdm); + if (ret) + break; + } + read_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_add_clkdm - add a clockdomain to a powerdomain + * @pwrdm: struct powerdomain * to add the clockdomain to + * @clkdm: struct clockdomain * to associate with a powerdomain + * + * Associate the clockdomain 'clkdm' with a powerdomain 'pwrdm'. This + * enables the use of pwrdm_for_each_clkdm(). Returns -EINVAL if + * presented with invalid pointers; -ENOMEM if memory could not be allocated; + * or 0 upon success. + */ +int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) +{ + unsigned long flags; + int i; + int ret = -EINVAL; + + if (!pwrdm || !clkdm) + return -EINVAL; + + pr_debug("powerdomain: associating clockdomain %s with powerdomain " + "%s\n", clkdm->name, pwrdm->name); + + write_lock_irqsave(&pwrdm_rwlock, flags); + + for (i = 0; i < PWRDM_MAX_CLKDMS; i++) { + if (!pwrdm->pwrdm_clkdms[i]) + break; +#ifdef DEBUG + if (pwrdm->pwrdm_clkdms[i] == clkdm) { + ret = -EINVAL; + goto pac_exit; + } +#endif + } + + if (i == PWRDM_MAX_CLKDMS) { + pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for " + "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name); + WARN_ON(1); + ret = -ENOMEM; + goto pac_exit; + } + + pwrdm->pwrdm_clkdms[i] = clkdm; + + ret = 0; + +pac_exit: + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_del_clkdm - remove a clockdomain from a powerdomain + * @pwrdm: struct powerdomain * to add the clockdomain to + * @clkdm: struct clockdomain * to associate with a powerdomain + * + * Dissociate the clockdomain 'clkdm' from the powerdomain + * 'pwrdm'. Returns -EINVAL if presented with invalid pointers; + * -ENOENT if the clkdm was not associated with the powerdomain, or 0 + * upon success. + */ +int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) +{ + unsigned long flags; + int ret = -EINVAL; + int i; + + if (!pwrdm || !clkdm) + return -EINVAL; + + pr_debug("powerdomain: dissociating clockdomain %s from powerdomain " + "%s\n", clkdm->name, pwrdm->name); + + write_lock_irqsave(&pwrdm_rwlock, flags); + + for (i = 0; i < PWRDM_MAX_CLKDMS; i++) + if (pwrdm->pwrdm_clkdms[i] == clkdm) + break; + + if (i == PWRDM_MAX_CLKDMS) { + pr_debug("powerdomain: clkdm %s not associated with pwrdm " + "%s ?!\n", clkdm->name, pwrdm->name); + ret = -ENOENT; + goto pdc_exit; + } + + pwrdm->pwrdm_clkdms[i] = NULL; + + ret = 0; + +pdc_exit: + write_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + +/** + * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm + * @pwrdm: struct powerdomain * to iterate over + * @fn: callback function * + * + * Call the supplied function for each clockdomain in the powerdomain + * 'pwrdm'. The callback function can return anything but 0 to bail + * out early from the iterator. The callback function is called with + * the pwrdm_rwlock held for reading, so no powerdomain structure + * manipulation functions should be called from the callback, although + * hardware powerdomain control functions are fine. Returns -EINVAL + * if presented with invalid pointers; or passes along the last return + * value of the callback function, which should be 0 for success or + * anything else to indicate failure. + */ +int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, + int (*fn)(struct powerdomain *pwrdm, + struct clockdomain *clkdm)) +{ + unsigned long flags; + int ret = 0; + int i; + + if (!fn) + return -EINVAL; + + read_lock_irqsave(&pwrdm_rwlock, flags); + + for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++) + ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]); + + read_unlock_irqrestore(&pwrdm_rwlock, flags); + + return ret; +} + + +/** + * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1 + * @pwrdm1: wake this struct powerdomain * up (dependent) + * @pwrdm2: when this struct powerdomain * wakes up (source) + * + * When the powerdomain represented by pwrdm2 wakes up (due to an + * interrupt), wake up pwrdm1. Implemented in hardware on the OMAP, + * this feature is designed to reduce wakeup latency of the dependent + * powerdomain. Returns -EINVAL if presented with invalid powerdomain + * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or + * 0 upon success. + */ +int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear wake up of " + "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n", + pwrdm1->name, pwrdm2->name); + + prm_set_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, PM_WKDEP); + + return 0; +} + +/** + * pwrdm_del_wkdep - remove a wakeup dependency from pwrdm2 to pwrdm1 + * @pwrdm1: wake this struct powerdomain * up (dependent) + * @pwrdm2: when this struct powerdomain * wakes up (source) + * + * Remove a wakeup dependency that causes pwrdm1 to wake up when pwrdm2 + * wakes up. Returns -EINVAL if presented with invalid powerdomain + * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or + * 0 upon success. + */ +int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear wake up of " + "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: hardware will no longer wake up %s after %s " + "wakes up\n", pwrdm1->name, pwrdm2->name); + + prm_clear_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, PM_WKDEP); + + return 0; +} + +/** + * pwrdm_read_wkdep - read wakeup dependency state from pwrdm2 to pwrdm1 + * @pwrdm1: wake this struct powerdomain * up (dependent) + * @pwrdm2: when this struct powerdomain * wakes up (source) + * + * Return 1 if a hardware wakeup dependency exists wherein pwrdm1 will be + * awoken when pwrdm2 wakes up; 0 if dependency is not set; -EINVAL + * if either powerdomain pointer is invalid; or -ENOENT if the hardware + * is incapable. + * + * REVISIT: Currently this function only represents software-controllable + * wakeup dependencies. Wakeup dependencies fixed in hardware are not + * yet handled here. + */ +int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear wake up of " + "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); + return IS_ERR(p); + } + + return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP, + (1 << pwrdm2->dep_bit)); +} + +/** + * pwrdm_add_sleepdep - add a sleep dependency from pwrdm2 to pwrdm1 + * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent) + * @pwrdm2: when this struct powerdomain * is active (source) + * + * Prevent pwrdm1 from automatically going inactive (and then to + * retention or off) if pwrdm2 is still active. Returns -EINVAL if + * presented with invalid powerdomain pointers or called on a machine + * that does not support software-configurable hardware sleep dependencies, + * -ENOENT if the specified dependency cannot be set in hardware, or + * 0 upon success. + */ +int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + if (!cpu_is_omap34xx()) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear sleep " + "dependency affecting %s from %s\n", pwrdm1->name, + pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n", + pwrdm1->name, pwrdm2->name); + + cm_set_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP); + + return 0; +} + +/** + * pwrdm_del_sleepdep - remove a sleep dependency from pwrdm2 to pwrdm1 + * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent) + * @pwrdm2: when this struct powerdomain * is active (source) + * + * Allow pwrdm1 to automatically go inactive (and then to retention or + * off), independent of the activity state of pwrdm2. Returns -EINVAL + * if presented with invalid powerdomain pointers or called on a machine + * that does not support software-configurable hardware sleep dependencies, + * -ENOENT if the specified dependency cannot be cleared in hardware, or + * 0 upon success. + */ +int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + if (!cpu_is_omap34xx()) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear sleep " + "dependency affecting %s from %s\n", pwrdm1->name, + pwrdm2->name); + return IS_ERR(p); + } + + pr_debug("powerdomain: will no longer prevent %s from sleeping if " + "%s is active\n", pwrdm1->name, pwrdm2->name); + + cm_clear_mod_reg_bits((1 << pwrdm2->dep_bit), + pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP); + + return 0; +} + +/** + * pwrdm_read_sleepdep - read sleep dependency state from pwrdm2 to pwrdm1 + * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent) + * @pwrdm2: when this struct powerdomain * is active (source) + * + * Return 1 if a hardware sleep dependency exists wherein pwrdm1 will + * not be allowed to automatically go inactive if pwrdm2 is active; + * 0 if pwrdm1's automatic power state inactivity transition is independent + * of pwrdm2's; -EINVAL if either powerdomain pointer is invalid or called + * on a machine that does not support software-configurable hardware sleep + * dependencies; or -ENOENT if the hardware is incapable. + * + * REVISIT: Currently this function only represents software-controllable + * sleep dependencies. Sleep dependencies fixed in hardware are not + * yet handled here. + */ +int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) +{ + struct powerdomain *p; + + if (!pwrdm1) + return -EINVAL; + + if (!cpu_is_omap34xx()) + return -EINVAL; + + p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); + if (IS_ERR(p)) { + pr_debug("powerdomain: hardware cannot set/clear sleep " + "dependency affecting %s from %s\n", pwrdm1->name, + pwrdm2->name); + return IS_ERR(p); + } + + return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP, + (1 << pwrdm2->dep_bit)); +} + +/** + * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain + * @pwrdm: struct powerdomain * + * + * Return the number of controllable memory banks in powerdomain pwrdm, + * starting with 1. Returns -EINVAL if the powerdomain pointer is null. + */ +int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return pwrdm->banks; +} + +/** + * pwrdm_set_next_pwrst - set next powerdomain power state + * @pwrdm: struct powerdomain * to set + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the powerdomain pwrdm's next power state to pwrst. The powerdomain + * may not enter this state immediately if the preconditions for this state + * have not been satisfied. Returns -EINVAL if the powerdomain pointer is + * null or if the power state is invalid for the powerdomin, or returns 0 + * upon success. + */ +int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->pwrsts & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next powerstate for %s to %0x\n", + pwrdm->name, pwrst); + + prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_read_next_pwrst - get next powerdomain power state + * @pwrdm: struct powerdomain * to get power state + * + * Return the powerdomain pwrdm's next power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the next power state + * upon success. + */ +int pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); +} + +/** + * pwrdm_read_pwrst - get current powerdomain power state + * @pwrdm: struct powerdomain * to get power state + * + * Return the powerdomain pwrdm's current power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the current power state + * upon success. + */ +int pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, + OMAP_POWERSTATEST_MASK); +} + +/** + * pwrdm_read_prev_pwrst - get previous powerdomain power state + * @pwrdm: struct powerdomain * to get previous power state + * + * Return the powerdomain pwrdm's previous power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the previous power state + * upon success. + */ +int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, + OMAP3430_LASTPOWERSTATEENTERED_MASK); +} + +/** + * pwrdm_set_logic_retst - set powerdomain logic power state upon retention + * @pwrdm: struct powerdomain * to set + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the next power state that the logic portion of the powerdomain + * pwrdm will enter when the powerdomain enters retention. This will + * be either RETENTION or OFF, if supported. Returns -EINVAL if the + * powerdomain pointer is null or the target power state is not not + * supported, or returns 0 upon success. + */ +int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n", + pwrdm->name, pwrst); + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE, + (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)), + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_set_mem_onst - set memory power state while powerdomain ON + * @pwrdm: struct powerdomain * to set + * @bank: memory bank number to set (0-3) + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the next power state that memory bank x of the powerdomain + * pwrdm will enter when the powerdomain enters the ON state. Bank + * will be a number from 0 to 3, and represents different types of + * memory, depending on the powerdomain. Returns -EINVAL if the + * powerdomain pointer is null or the target power state is not not + * supported for this memory bank, -EEXIST if the target memory bank + * does not exist or is not controllable, or returns 0 upon success. + */ +int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next memory powerstate for domain %s " + "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst); + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK; + break; + case 1: + m = OMAP3430_L1FLATMEMONSTATE_MASK; + break; + case 2: + m = OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK; + break; + case 3: + m = OMAP3430_L2FLATMEMONSTATE_MASK; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_set_mem_retst - set memory power state while powerdomain in RET + * @pwrdm: struct powerdomain * to set + * @bank: memory bank number to set (0-3) + * @pwrst: one of the PWRDM_POWER_* macros + * + * Set the next power state that memory bank x of the powerdomain + * pwrdm will enter when the powerdomain enters the RETENTION state. + * Bank will be a number from 0 to 3, and represents different types + * of memory, depending on the powerdomain. pwrst will be either + * RETENTION or OFF, if supported. Returns -EINVAL if the powerdomain + * pointer is null or the target power state is not not supported for + * this memory bank, -EEXIST if the target memory bank does not exist + * or is not controllable, or returns 0 upon success. + */ +int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst))) + return -EINVAL; + + pr_debug("powerdomain: setting next memory powerstate for domain %s " + "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst); + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_SHAREDL1CACHEFLATRETSTATE; + break; + case 1: + m = OMAP3430_L1FLATMEMRETSTATE; + break; + case 2: + m = OMAP3430_SHAREDL2CACHEFLATRETSTATE; + break; + case 3: + m = OMAP3430_L2FLATMEMRETSTATE; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, + PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_read_logic_pwrst - get current powerdomain logic retention power state + * @pwrdm: struct powerdomain * to get current logic retention power state + * + * Return the current power state that the logic portion of + * powerdomain pwrdm will enter + * Returns -EINVAL if the powerdomain pointer is null or returns the + * current logic retention power state upon success. + */ +int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, + OMAP3430_LOGICSTATEST); +} + +/** + * pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state + * @pwrdm: struct powerdomain * to get previous logic power state + * + * Return the powerdomain pwrdm's logic power state. Returns -EINVAL + * if the powerdomain pointer is null or returns the previous logic + * power state upon success. + */ +int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, + OMAP3430_LASTLOGICSTATEENTERED); +} + +/** + * pwrdm_read_mem_pwrst - get current memory bank power state + * @pwrdm: struct powerdomain * to get current memory bank power state + * @bank: memory bank number (0-3) + * + * Return the powerdomain pwrdm's current memory power state for bank + * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if + * the target memory bank does not exist or is not controllable, or + * returns the current memory power state upon success. + */ +int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK; + break; + case 1: + m = OMAP3430_L1FLATMEMSTATEST_MASK; + break; + case 2: + m = OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK; + break; + case 3: + m = OMAP3430_L2FLATMEMSTATEST_MASK; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, m); +} + +/** + * pwrdm_read_prev_mem_pwrst - get previous memory bank power state + * @pwrdm: struct powerdomain * to get previous memory bank power state + * @bank: memory bank number (0-3) + * + * Return the powerdomain pwrdm's previous memory power state for bank + * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if + * the target memory bank does not exist or is not controllable, or + * returns the previous memory power state upon success. + */ +int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m; + + if (!pwrdm) + return -EINVAL; + + if (pwrdm->banks < (bank + 1)) + return -EEXIST; + + /* + * The register bit names below may not correspond to the + * actual names of the bits in each powerdomain's register, + * but the type of value returned is the same for each + * powerdomain. + */ + switch (bank) { + case 0: + m = OMAP3430_LASTMEM1STATEENTERED_MASK; + break; + case 1: + m = OMAP3430_LASTMEM2STATEENTERED_MASK; + break; + case 2: + m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; + break; + case 3: + m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; + break; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + + return prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, m); +} + +/** + * pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm + * @pwrdm: struct powerdomain * to clear + * + * Clear the powerdomain's previous power state register. Clears the + * entire register, including logic and memory bank previous power states. + * Returns -EINVAL if the powerdomain pointer is null, or returns 0 upon + * success. + */ +int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + /* + * XXX should get the powerdomain's current state here; + * warn & fail if it is not ON. + */ + + pr_debug("powerdomain: clearing previous power state reg for %s\n", + pwrdm->name); + + prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); + + return 0; +} + +/** + * pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm + * @pwrdm: struct powerdomain * + * + * Enable automatic context save-and-restore upon power state change + * for some devices in a powerdomain. Warning: this only affects a + * subset of devices in a powerdomain; check the TRM closely. Returns + * -EINVAL if the powerdomain pointer is null or if the powerdomain + * does not support automatic save-and-restore, or returns 0 upon + * success. + */ +int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR)) + return -EINVAL; + + pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", + pwrdm->name); + + prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm + * @pwrdm: struct powerdomain * + * + * Disable automatic context save-and-restore upon power state change + * for some devices in a powerdomain. Warning: this only affects a + * subset of devices in a powerdomain; check the TRM closely. Returns + * -EINVAL if the powerdomain pointer is null or if the powerdomain + * does not support automatic save-and-restore, or returns 0 upon + * success. + */ +int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR)) + return -EINVAL; + + pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", + pwrdm->name); + + prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0, + pwrdm->prcm_offs, PM_PWSTCTRL); + + return 0; +} + +/** + * pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR + * @pwrdm: struct powerdomain * + * + * Returns 1 if powerdomain 'pwrdm' supports hardware save-and-restore + * for some devices, or 0 if it does not. + */ +bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) +{ + return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0; +} + +/** + * pwrdm_wait_transition - wait for powerdomain power transition to finish + * @pwrdm: struct powerdomain * to wait for + * + * If the powerdomain pwrdm is in the process of a state transition, + * spin until it completes the power transition, or until an iteration + * bailout value is reached. Returns -EINVAL if the powerdomain + * pointer is null, -EAGAIN if the bailout value was reached, or + * returns 0 upon success. + */ +int pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + if (!pwrdm) + return -EINVAL; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((prm_read_mod_reg(pwrdm->prcm_offs, PM_PWSTST) & + OMAP_INTRANSITION) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c >= PWRDM_TRANSITION_BAILOUT) { + printk(KERN_ERR "powerdomain: waited too long for " + "powerdomain %s to complete transition\n", pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + + diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h new file mode 100644 index 000000000000..1e151faebbd3 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains.h @@ -0,0 +1,187 @@ +/* + * OMAP2/3 common powerdomain definitions + * + * Copyright (C) 2007-8 Texas Instruments, Inc. + * Copyright (C) 2007-8 Nokia Corporation + * + * Written by Paul Walmsley + * Debugging and integration fixes by Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS +#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS + +/* + * This file contains all of the powerdomains that have some element + * of software control for the OMAP24xx and OMAP34XX chips. + * + * A few notes: + * + * This is not an exhaustive listing of powerdomains on the chips; only + * powerdomains that can be controlled in software. + * + * A useful validation rule for struct powerdomain: + * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array + * must have a dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really + * just software-controllable dependencies. Non-software-controllable + * dependencies do exist, but they are not encoded below (yet). + * + * 24xx does not support programmable sleep dependencies (SLEEPDEP) + * + */ + +/* + * The names for the DSP/IVA2 powerdomains are confusing. + * + * Most OMAP chips have an on-board DSP. + * + * On the 2420, this is a 'C55 DSP called, simply, the DSP. Its + * powerdomain is called the "DSP power domain." On the 2430, the + * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1. Its + * powerdomain is still called the "DSP power domain." On the 3430, + * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but + * its powerdomain is now called the "IVA2 power domain." + * + * The 2420 also has something called the IVA, which is a separate ARM + * core, and has nothing to do with the DSP/IVA2. + * + * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM + * address offset is different between the C55 and C64 DSPs. + * + * The overly-specific dep_bit names are due to a bit name collision + * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift + * value are the same for all powerdomains: 2 + */ + +/* + * XXX should dep_bit be a mask, so we can test to see if it is 0 as a + * sanity check? + * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE + */ + +#include <mach/powerdomain.h> + +#include "prcm-common.h" +#include "prm.h" +#include "cm.h" + +/* OMAP2/3-common powerdomains and wakeup dependencies */ + +/* + * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP + * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE + * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE + */ +static struct pwrdm_dep gfx_sgx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | + CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | + CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* + * 3430: CM_SLEEPDEP_CAM: MPU + * 3430ES1: CM_SLEEPDEP_GFX: MPU + * 3430ES2: CM_SLEEPDEP_SGX: MPU + */ +static struct pwrdm_dep cam_gfx_sleepdeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +#include "powerdomains24xx.h" +#include "powerdomains34xx.h" + + +/* + * OMAP2/3 common powerdomains + */ + +/* + * The GFX powerdomain is not present on 3430ES2, but currently we do not + * have a macro to filter it out at compile-time. + */ +static struct powerdomain gfx_pwrdm = { + .name = "gfx_pwrdm", + .prcm_offs = GFX_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | + CHIP_IS_OMAP3430ES1), + .wkdep_srcs = gfx_sgx_wkdeps, + .sleepdep_srcs = cam_gfx_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain wkup_pwrdm = { + .name = "wkup_pwrdm", + .prcm_offs = WKUP_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), + .dep_bit = OMAP_EN_WKUP_SHIFT, +}; + + + +/* As powerdomains are added or removed above, this list must also be changed */ +static struct powerdomain *powerdomains_omap[] __initdata = { + + &gfx_pwrdm, + &wkup_pwrdm, + +#ifdef CONFIG_ARCH_OMAP24XX + &dsp_pwrdm, + &mpu_24xx_pwrdm, + &core_24xx_pwrdm, +#endif + +#ifdef CONFIG_ARCH_OMAP2430 + &mdm_pwrdm, +#endif + +#ifdef CONFIG_ARCH_OMAP34XX + &iva2_pwrdm, + &mpu_34xx_pwrdm, + &neon_pwrdm, + &core_34xx_pwrdm, + &cam_pwrdm, + &dss_pwrdm, + &per_pwrdm, + &emu_pwrdm, + &sgx_pwrdm, + &usbhost_pwrdm, +#endif + + NULL +}; + + +#endif diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h new file mode 100644 index 000000000000..9f08dc3f7fd2 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains24xx.h @@ -0,0 +1,200 @@ +/* + * OMAP24XX powerdomain definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * Debugging and integration fixes by Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX +#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX + +/* + * N.B. If powerdomains are added or removed from this file, update + * the array in mach-omap2/powerdomains.h. + */ + +#include <mach/powerdomain.h> + +#include "prcm-common.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + +/* 24XX powerdomains and dependencies */ + +#ifdef CONFIG_ARCH_OMAP24XX + + +/* Wakeup dependency source arrays */ + +/* + * 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP + * 2430 PM_WKDEP_MDM: same as above + */ +static struct pwrdm_dep dsp_mdm_24xx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { NULL }, +}; + +/* + * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP + * 2430 adds MDM + */ +static struct pwrdm_dep mpu_24xx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "dsp_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mdm_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + }, + { NULL }, +}; + +/* + * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP + * 2430 adds MDM + */ +static struct pwrdm_dep core_24xx_wkdeps[] = { + { + .pwrdm_name = "dsp_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "gfx_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) + }, + { + .pwrdm_name = "mdm_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + }, + { NULL }, +}; + + +/* Powerdomains */ + +static struct powerdomain dsp_pwrdm = { + .name = "dsp_pwrdm", + .prcm_offs = OMAP24XX_DSP_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), + .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT, + .wkdep_srcs = dsp_mdm_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, + }, +}; + +static struct powerdomain mpu_24xx_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), + .dep_bit = OMAP24XX_EN_MPU_SHIFT, + .wkdep_srcs = mpu_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, + }, +}; + +static struct powerdomain core_24xx_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), + .wkdep_srcs = core_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .dep_bit = OMAP24XX_EN_CORE_SHIFT, + .banks = 3, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ + [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */ + [2] = PWRSTS_OFF_RET, /* MEM3RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ + [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */ + }, +}; + +#endif /* CONFIG_ARCH_OMAP24XX */ + + + +/* + * 2430-specific powerdomains + */ + +#ifdef CONFIG_ARCH_OMAP2430 + +/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */ + +/* Another case of bit name collisions between several registers: EN_MDM */ +static struct powerdomain mdm_pwrdm = { + .name = "mdm_pwrdm", + .prcm_offs = OMAP2430_MDM_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT, + .wkdep_srcs = dsp_mdm_24xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +#endif /* CONFIG_ARCH_OMAP2430 */ + + +#endif diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h new file mode 100644 index 000000000000..f573f7108398 --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -0,0 +1,327 @@ +/* + * OMAP34XX powerdomain definitions + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation + * + * Written by Paul Walmsley + * Debugging and integration fixes by Jouni Högander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX +#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX + +/* + * N.B. If powerdomains are added or removed from this file, update + * the array in mach-omap2/powerdomains.h. + */ + +#include <mach/powerdomain.h> + +#include "prcm-common.h" +#include "prm.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" + +/* + * 34XX-specific powerdomains, dependencies + */ + +#ifdef CONFIG_ARCH_OMAP34XX + +/* + * 3430: PM_WKDEP_{PER,USBHOST}: CORE, IVA2, MPU, WKUP + * (USBHOST is ES2 only) + */ +static struct pwrdm_dep per_usbhost_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* + * 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER + */ +static struct pwrdm_dep mpu_34xx_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "dss_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "per_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* + * 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER + */ +static struct pwrdm_dep iva2_wkdeps[] = { + { + .pwrdm_name = "core_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "dss_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "per_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +/* 3430 PM_WKDEP_{CAM,DSS}: IVA2, MPU, WKUP */ +static struct pwrdm_dep cam_dss_wkdeps[] = { + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "wkup_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + +/* 3430: PM_WKDEP_NEON: MPU */ +static struct pwrdm_dep neon_wkdeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +/* Sleep dependency source arrays for 34xx-specific pwrdms - 34XX only */ + +/* + * 3430: CM_SLEEPDEP_{DSS,PER}: MPU, IVA + * 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA + */ +static struct pwrdm_dep dss_per_usbhost_sleepdeps[] = { + { + .pwrdm_name = "mpu_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { + .pwrdm_name = "iva2_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + }, + { NULL }, +}; + + +/* + * Powerdomains + */ + +static struct powerdomain iva2_pwrdm = { + .name = "iva2_pwrdm", + .prcm_offs = OMAP3430_IVA2_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT, + .wkdep_srcs = iva2_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 4, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, + [1] = PWRSTS_OFF_RET, + [2] = PWRSTS_OFF_RET, + [3] = PWRSTS_OFF_RET, + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, + [1] = PWRDM_POWER_ON, + [2] = PWRSTS_OFF_ON, + [3] = PWRDM_POWER_ON, + }, +}; + +static struct powerdomain mpu_34xx_pwrdm = { + .name = "mpu_pwrdm", + .prcm_offs = MPU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_34xx_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_ON, + }, +}; + +/* No wkdeps or sleepdeps for 34xx core apparently */ +static struct powerdomain core_34xx_pwrdm = { + .name = "core_pwrdm", + .prcm_offs = CORE_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .pwrsts = PWRSTS_OFF_RET_ON, + .dep_bit = OMAP3430_EN_CORE_SHIFT, + .banks = 2, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ + [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ + [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ + }, +}; + +/* Another case of bit name collisions between several registers: EN_DSS */ +static struct powerdomain dss_pwrdm = { + .name = "dss_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .prcm_offs = OMAP3430_DSS_MOD, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = cam_dss_wkdeps, + .sleepdep_srcs = dss_per_usbhost_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain sgx_pwrdm = { + .name = "sgx_pwrdm", + .prcm_offs = OMAP3430ES2_SGX_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .wkdep_srcs = gfx_sgx_wkdeps, + .sleepdep_srcs = cam_gfx_sleepdeps, + /* XXX This is accurate for 3430 SGX, but what about GFX? */ + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain cam_pwrdm = { + .name = "cam_pwrdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .prcm_offs = OMAP3430_CAM_MOD, + .wkdep_srcs = cam_dss_wkdeps, + .sleepdep_srcs = cam_gfx_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain per_pwrdm = { + .name = "per_pwrdm", + .prcm_offs = OMAP3430_PER_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_usbhost_wkdeps, + .sleepdep_srcs = dss_per_usbhost_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +static struct powerdomain emu_pwrdm = { + .name = "emu_pwrdm", + .prcm_offs = OMAP3430_EMU_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +static struct powerdomain neon_pwrdm = { + .name = "neon_pwrdm", + .prcm_offs = OMAP3430_NEON_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .wkdep_srcs = neon_wkdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, +}; + +static struct powerdomain usbhost_pwrdm = { + .name = "usbhost_pwrdm", + .prcm_offs = OMAP3430ES2_USBHOST_MOD, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2), + .wkdep_srcs = per_usbhost_wkdeps, + .sleepdep_srcs = dss_per_usbhost_sleepdeps, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRDM_POWER_RET, + .banks = 1, + .pwrsts_mem_ret = { + [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ + }, + .pwrsts_mem_on = { + [0] = PWRDM_POWER_ON, /* MEMONSTATE */ + }, +}; + +#endif /* CONFIG_ARCH_OMAP34XX */ + + +#endif diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 54c32f482131..4a32822ff3fc 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -312,7 +312,8 @@ #define OMAP3430_ST_GPT2 (1 << 3) /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */ -#define OMAP3430_EN_CORE (1 << 0) +#define OMAP3430_EN_CORE_SHIFT 0 +#define OMAP3430_EN_CORE_MASK (1 << 0) #endif diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h index c6d17a3378ec..4002051c20b9 100644 --- a/arch/arm/mach-omap2/prm-regbits-24xx.h +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -29,8 +29,10 @@ #define OMAP24XX_WKUP1_EN (1 << 0) /* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */ -#define OMAP24XX_EN_MPU (1 << 1) -#define OMAP24XX_EN_CORE (1 << 0) +#define OMAP24XX_EN_MPU_SHIFT 1 +#define OMAP24XX_EN_MPU_MASK (1 << 1) +#define OMAP24XX_EN_CORE_SHIFT 0 +#define OMAP24XX_EN_CORE_MASK (1 << 0) /* * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM @@ -140,8 +142,10 @@ /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */ /* PM_WKDEP_MPU specific bits */ -#define OMAP2430_PM_WKDEP_MPU_EN_MDM (1 << 5) -#define OMAP24XX_PM_WKDEP_MPU_EN_DSP (1 << 2) +#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT 5 +#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK (1 << 5) +#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT 2 +#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK (1 << 2) /* PM_EVGENCTRL_MPU specific bits */ diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index b4686bc345ca..5b5ecfe6c999 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -68,7 +68,8 @@ #define OMAP3430_VPINIDLE (1 << 0) /* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */ -#define OMAP3430_EN_PER (1 << 7) +#define OMAP3430_EN_PER_SHIFT 7 +#define OMAP3430_EN_PER_MASK (1 << 7) /* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */ #define OMAP3430_MEMORYCHANGE (1 << 3) @@ -77,7 +78,7 @@ #define OMAP3430_LOGICSTATEST (1 << 2) /* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */ -#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2) +#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2) /* * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE, @@ -278,8 +279,10 @@ #define OMAP3430_EMULATION_MPU_RST (1 << 11) /* PM_WKDEP_MPU specific bits */ -#define OMAP3430_PM_WKDEP_MPU_EN_DSS (1 << 5) -#define OMAP3430_PM_WKDEP_MPU_EN_IVA2 (1 << 2) +#define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT 5 +#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK (1 << 5) +#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT 2 +#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK (1 << 2) /* PM_EVGENCTRL_MPU */ #define OMAP3430_OFFLOADMODE_SHIFT 3 diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index bbf41fc8e9a9..e4dc4b17881d 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -18,7 +18,7 @@ #ifndef __ASSEMBLER__ #define OMAP_PRM_REGADDR(module, reg) \ - (void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) + IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg)) #else #define OMAP2420_PRM_REGADDR(module, reg) \ IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) @@ -305,7 +305,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM, * PM_WKDEP_PER */ -#define OMAP_EN_WKUP (1 << 4) +#define OMAP_EN_WKUP_SHIFT 4 +#define OMAP_EN_WKUP_MASK (1 << 4) /* * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 7d9444adc5df..4dcf39c285b9 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -3,7 +3,7 @@ * * OMAP2 serial support. * - * Copyright (C) 2005 Nokia Corporation + * Copyright (C) 2005-2008 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> * * Based off of arch/arm/mach-omap/omap1/serial.c @@ -22,38 +22,34 @@ #include <mach/common.h> #include <mach/board.h> -static struct clk * uart1_ick = NULL; -static struct clk * uart1_fck = NULL; -static struct clk * uart2_ick = NULL; -static struct clk * uart2_fck = NULL; -static struct clk * uart3_ick = NULL; -static struct clk * uart3_fck = NULL; +static struct clk *uart_ick[OMAP_MAX_NR_PORTS]; +static struct clk *uart_fck[OMAP_MAX_NR_PORTS]; static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), - .mapbase = (unsigned long)OMAP_UART1_BASE, + .membase = IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = OMAP_UART1_BASE, .irq = 72, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, + .uartclk = OMAP24XX_BASE_BAUD * 16, }, { - .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), - .mapbase = (unsigned long)OMAP_UART2_BASE, + .membase = IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = OMAP_UART2_BASE, .irq = 73, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, + .uartclk = OMAP24XX_BASE_BAUD * 16, }, { - .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), - .mapbase = (unsigned long)OMAP_UART3_BASE, + .membase = IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = OMAP_UART3_BASE, .irq = 74, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = OMAP16XX_BASE_BAUD * 16, + .uartclk = OMAP24XX_BASE_BAUD * 16, }, { .flags = 0 } @@ -70,7 +66,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, int value) { offset <<= p->regshift; - __raw_writeb(value, (unsigned long)(p->membase + offset)); + __raw_writeb(value, p->membase + offset); } /* @@ -86,10 +82,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p) serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); } -void __init omap_serial_init() +void omap_serial_enable_clocks(int enable) +{ + int i; + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + if (uart_ick[i] && uart_fck[i]) { + if (enable) { + clk_enable(uart_ick[i]); + clk_enable(uart_fck[i]); + } else { + clk_disable(uart_ick[i]); + clk_disable(uart_fck[i]); + } + } + } +} + +void __init omap_serial_init(void) { int i; const struct omap_uart_config *info; + char name[16]; /* * Make sure the serial ports are muxed on at this point. @@ -97,8 +110,7 @@ void __init omap_serial_init() * if not needed. */ - info = omap_get_config(OMAP_TAG_UART, - struct omap_uart_config); + info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); if (info == NULL) return; @@ -107,58 +119,26 @@ void __init omap_serial_init() struct plat_serial8250_port *p = serial_platform_data + i; if (!(info->enabled_uarts & (1 << i))) { - p->membase = 0; + p->membase = NULL; p->mapbase = 0; continue; } - switch (i) { - case 0: - uart1_ick = clk_get(NULL, "uart1_ick"); - if (IS_ERR(uart1_ick)) - printk("Could not get uart1_ick\n"); - else { - clk_enable(uart1_ick); - } - - uart1_fck = clk_get(NULL, "uart1_fck"); - if (IS_ERR(uart1_fck)) - printk("Could not get uart1_fck\n"); - else { - clk_enable(uart1_fck); - } - break; - case 1: - uart2_ick = clk_get(NULL, "uart2_ick"); - if (IS_ERR(uart2_ick)) - printk("Could not get uart2_ick\n"); - else { - clk_enable(uart2_ick); - } - - uart2_fck = clk_get(NULL, "uart2_fck"); - if (IS_ERR(uart2_fck)) - printk("Could not get uart2_fck\n"); - else { - clk_enable(uart2_fck); - } - break; - case 2: - uart3_ick = clk_get(NULL, "uart3_ick"); - if (IS_ERR(uart3_ick)) - printk("Could not get uart3_ick\n"); - else { - clk_enable(uart3_ick); - } - - uart3_fck = clk_get(NULL, "uart3_fck"); - if (IS_ERR(uart3_fck)) - printk("Could not get uart3_fck\n"); - else { - clk_enable(uart3_fck); - } - break; - } + sprintf(name, "uart%d_ick", i+1); + uart_ick[i] = clk_get(NULL, name); + if (IS_ERR(uart_ick[i])) { + printk(KERN_ERR "Could not get uart%d_ick\n", i+1); + uart_ick[i] = NULL; + } else + clk_enable(uart_ick[i]); + + sprintf(name, "uart%d_fck", i+1); + uart_fck[i] = clk_get(NULL, name); + if (IS_ERR(uart_fck[i])) { + printk(KERN_ERR "Could not get uart%d_fck\n", i+1); + uart_fck[i] = NULL; + } else + clk_enable(uart_fck[i]); omap_serial_reset(p); } diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep24xx.S index 87a706fd5f82..43336b93b21c 100644 --- a/arch/arm/mach-omap2/sleep.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -5,6 +5,10 @@ * Texas Instruments, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> * + * (C) Copyright 2006 Nokia Corporation + * Fixed idle loop sleep + * Igor Stoppa <igor.stoppa@nokia.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -26,6 +30,8 @@ #include <mach/io.h> #include <mach/pm.h> +#include <mach/omap24xx.h> + #include "sdrc.h" /* First address of reserved address space? apparently valid for OMAP2 & 3 */ @@ -52,15 +58,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz) .word . - omap24xx_idle_loop_suspend /* - * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing + * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore * SDRC. * * Input: * R0 : DLL ctrl value pre-Sleep - * R1 : Processor+Revision - * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2 - * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2 + * R1 : SDRC_DLLA_CTRL + * R2 : SDRC_POWER * * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on * when we get called, but the DLL probably isn't. We will wait a bit more in @@ -80,15 +85,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz) */ ENTRY(omap24xx_cpu_suspend) stmfd sp!, {r0 - r12, lr} @ save registers on stack - mov r3, #0x0 @ clear for mrc call + mov r3, #0x0 @ clear for mcr call mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished nop nop - ldr r3, A_SDRC_POWER @ addr of sdrc power - ldr r4, [r3] @ value of sdrc power + ldr r4, [r2] @ read SDRC_POWER orr r4, r4, #0x40 @ enable self refresh on idle req mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) - str r4, [r3] @ make it so + str r4, [r2] @ make it so mov r2, #0 nop mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt @@ -97,14 +101,13 @@ loop: subs r5, r5, #0x1 @ awake, wait just a bit bne loop - /* The DPLL has on before we take the DDR out of self refresh */ + /* The DPLL has to be on before we take the DDR out of self refresh */ bic r4, r4, #0x40 @ now clear self refresh bit. - str r4, [r3] @ put vlaue back. + str r4, [r2] @ write to SDRC_POWER ldr r4, A_SDRC0 @ make a clock happen - ldr r4, [r4] + ldr r4, [r4] @ read A_SDRC0 nop @ start auto refresh only after clk ok movs r0, r0 @ see if DDR or SDR - ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl strne r0, [r1] @ rewrite DLLA to force DLL reload addne r1, r1, #0x8 @ move to DLLB strne r0, [r1] @ rewrite DLLB to force DLL reload @@ -116,13 +119,8 @@ loop2: /* resume*/ ldmfd sp!, {r0 - r12, pc} @ restore regs and return -A_SDRC_POWER: - .word OMAP242X_SDRC_REGADDR(SDRC_POWER) A_SDRC0: .word A_SDRC0_V -A_SDRC_DLLA_CTRL_S: - .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL) ENTRY(omap24xx_cpu_suspend_sz) .word . - omap24xx_cpu_suspend - diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S new file mode 100644 index 000000000000..2c7146136342 --- /dev/null +++ b/arch/arm/mach-omap2/sram34xx.S @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/mach-omap3/sram.S + * + * Omap3 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2007 + * Texas Instruments Inc. + * Rajendra Nayak <rnayak@ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/hardware.h> + +#include <mach/io.h> + +#include "sdrc.h" +#include "cm.h" + + .text + +/* + * Change frequency of core dpll + * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + */ +ENTRY(omap3_sram_configure_core_dpll) + stmfd sp!, {r1-r12, lr} @ store regs to stack + cmp r3, #0x2 + blne configure_sdrc + cmp r3, #0x2 + blne lock_dll + cmp r3, #0x1 + blne unlock_dll + bl sdram_in_selfrefresh @ put the SDRAM in self refresh + bl configure_core_dpll + bl enable_sdrc + cmp r3, #0x1 + blne wait_dll_unlock + cmp r3, #0x2 + blne wait_dll_lock + cmp r3, #0x1 + blne configure_sdrc + mov r0, #0 @ return value + ldmfd sp!, {r1-r12, pc} @ restore regs and return +unlock_dll: + ldr r4, omap3_sdrc_dlla_ctrl + ldr r5, [r4] + orr r5, r5, #0x4 + str r5, [r4] + bx lr +lock_dll: + ldr r4, omap3_sdrc_dlla_ctrl + ldr r5, [r4] + bic r5, r5, #0x4 + str r5, [r4] + bx lr +sdram_in_selfrefresh: + mov r5, #0x0 @ Move 0 to R5 + mcr p15, 0, r5, c7, c10, 5 @ memory barrier + ldr r4, omap3_sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r5, [r4] + bic r5, r5, #0x2 @ disable iclk bit for SRDC + str r5, [r4] +wait_sdrc_idle: + ldr r4, omap3_cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 @ check for SDRC idle + cmp r5, #2 + bne wait_sdrc_idle + bx lr +configure_core_dpll: + ldr r4, omap3_cm_clksel1_pll + ldr r5, [r4] + ldr r6, core_m2_mask_val @ modify m2 for core dpll + and r5, r5, r6 + orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val + str r5, [r4] + mov r5, #0x800 @ wait for the clock to stabilise + cmp r3, #2 + bne wait_clk_stable + bx lr +wait_clk_stable: + subs r5, r5, #1 + bne wait_clk_stable + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bx lr +enable_sdrc: + ldr r4, omap3_cm_iclken1_core + ldr r5, [r4] + orr r5, r5, #0x2 @ enable iclk bit for SDRC + str r5, [r4] +wait_sdrc_idle1: + ldr r4, omap3_cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 + cmp r5, #0 + bne wait_sdrc_idle1 + ldr r4, omap3_sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +wait_dll_lock: + ldr r4, omap3_sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr +wait_dll_unlock: + ldr r4, omap3_sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x0 + bne wait_dll_unlock + bx lr +configure_sdrc: + ldr r4, omap3_sdrc_rfr_ctrl + str r0, [r4] + ldr r4, omap3_sdrc_actim_ctrla + str r1, [r4] + ldr r4, omap3_sdrc_actim_ctrlb + str r2, [r4] + bx lr + +omap3_sdrc_power: + .word OMAP34XX_SDRC_REGADDR(SDRC_POWER) +omap3_cm_clksel1_pll: + .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1) +omap3_cm_idlest1_core: + .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) +omap3_cm_iclken1_core: + .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) +omap3_sdrc_rfr_ctrl: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) +omap3_sdrc_actim_ctrla: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) +omap3_sdrc_actim_ctrlb: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_dlla_status: + .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) +omap3_sdrc_dlla_ctrl: + .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) +core_m2_mask_val: + .word 0x07FFFFFF + +ENTRY(omap3_sram_configure_core_dpll_sz) + .word . - omap3_sram_configure_core_dpll diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 330814d1ee25..d1193884d76d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -428,7 +428,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3 select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index b917206ee906..a94f0c44ebc8 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -15,6 +15,9 @@ config ARCH_OMAP1 config ARCH_OMAP2 bool "TI OMAP2" +config ARCH_OMAP3 + bool "TI OMAP3" + endchoice comment "OMAP Feature Selections" @@ -29,6 +32,30 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS || LEDS_OMAP_DEBUG +config OMAP_DEBUG_POWERDOMAIN + bool "Emit debug messages from powerdomain layer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + default n + help + Say Y here if you want to compile in powerdomain layer + debugging messages for OMAP2/3. These messages can + provide more detail as to why some powerdomain calls + may be failing, and will also emit a descriptive message + for every powerdomain register write. However, the + extra detail costs some memory. + +config OMAP_DEBUG_CLOCKDOMAIN + bool "Emit debug messages from clockdomain layer" + depends on ARCH_OMAP2 || ARCH_OMAP3 + default n + help + Say Y here if you want to compile in clockdomain layer + debugging messages for OMAP2/3. These messages can + provide more detail as to why some clockdomain calls + may be failing, and will also emit a descriptive message + for every clockdomain register write. However, the + extra detail costs some memory. + config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP @@ -88,13 +115,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX and 24XX. + currently only available for OMAP16XX, 24XX and 34XX. endchoice @@ -109,7 +136,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to use OMAP Dual-Mode timers. diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 2c4051cc79a1..deaff58878a2 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ - usb.o fb.o + usb.o fb.o io.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 8bdf0ead0cf3..0843b8882f93 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -248,6 +248,7 @@ static struct omap_globals *omap2_globals; static void __init __omap2_set_globals(void) { + omap2_set_globals_tap(omap2_globals); omap2_set_globals_memory(omap2_globals); omap2_set_globals_control(omap2_globals); omap2_set_globals_prcm(omap2_globals); @@ -258,12 +259,13 @@ static void __init __omap2_set_globals(void) #if defined(CONFIG_ARCH_OMAP2420) static struct omap_globals omap242x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), + .class = OMAP242X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x48014000), + .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -276,12 +278,13 @@ void __init omap2_set_globals_242x(void) #if defined(CONFIG_ARCH_OMAP2430) static struct omap_globals omap243x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), + .class = OMAP243X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x4900a000), + .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -294,12 +297,13 @@ void __init omap2_set_globals_243x(void) #if defined(CONFIG_ARCH_OMAP3430) static struct omap_globals omap343x_globals = { - .tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000), - .sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), + .class = OMAP343X_CLASS, + .tap = OMAP2_IO_ADDRESS(0x4830A000), + .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_343x(void) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index b38410f26203..25232b281e1e 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -20,17 +20,17 @@ #include <asm/mach/map.h> #include <mach/tc.h> +#include <mach/control.h> #include <mach/board.h> #include <mach/mmc.h> #include <mach/mux.h> #include <mach/gpio.h> #include <mach/menelaus.h> #include <mach/mcbsp.h> +#include <mach/dsp_common.h> #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) -#include "../plat-omap/dsp/dsp_common.h" - static struct dsp_platform_data dsp_pdata = { .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list), }; @@ -76,7 +76,7 @@ int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev) { static DEFINE_MUTEX(dsp_pdata_lock); - mutex_init(&kdev->lock); + spin_lock_init(&kdev->lock); mutex_lock(&dsp_pdata_lock); list_add_tail(&kdev->entry, &dsp_pdata.kdev_list); @@ -95,6 +95,10 @@ static inline void omap_init_dsp(void) { } static void omap_init_kp(void) { + /* 2430 and 34xx keypad is on TWL4030 */ + if (cpu_is_omap2430() || cpu_is_omap34xx()) + return; + if (machine_is_omap_h2() || machine_is_omap_h3()) { omap_cfg_reg(F18_1610_KBC0); omap_cfg_reg(D20_1610_KBC1); @@ -156,13 +160,6 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, { int i; - if (size > OMAP_MAX_MCBSP_COUNT) { - printk(KERN_WARNING "Registered too many McBSPs platform_data." - " Using maximum (%d) available.\n", - OMAP_MAX_MCBSP_COUNT); - size = OMAP_MAX_MCBSP_COUNT; - } - omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), GFP_KERNEL); if (!omap_mcbsp_devices) { @@ -538,10 +535,6 @@ static inline void omap_init_rng(void) {} */ static int __init omap_init_devices(void) { -/* - * Need to enable relevant once for 2430 SDP - */ -#ifndef CONFIG_MACH_OMAP_2430SDP /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ @@ -551,7 +544,6 @@ static int __init omap_init_devices(void) omap_init_uwire(); omap_init_wdt(); omap_init_rng(); -#endif return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a63b644ad305..50f8b4ad9a09 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1233,7 +1233,7 @@ int omap_request_dma_chain(int dev_id, const char *dev_name, /* request and reserve DMA channels for the chain */ for (i = 0; i < no_of_chans; i++) { err = omap_request_dma(dev_id, dev_name, - callback, 0, &channels[i]); + callback, NULL, &channels[i]); if (err < 0) { int j; for (j = 0; j < i; j++) @@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void) int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE); + omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE); dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE); + omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE); + omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 606fcffdcefc..963c31cd1541 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - timer->io_base = (void __iomem *)io_p2v(timer->phys_base); + timer->io_base = IO_ADDRESS(timer->phys_base); #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) if (cpu_class_is_omap2()) { char clk_name[16]; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 5935ae4e550b..8679fbca6bbe 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -28,7 +28,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 +#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000) #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -42,10 +42,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 -#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 -#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 -#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 +#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400) +#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00) +#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400) +#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00) #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -67,12 +67,12 @@ /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 -#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 -#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 -#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 -#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 -#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 +#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000) +#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800) +#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000) +#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800) +#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000) +#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800) #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -83,16 +83,16 @@ /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000 -#define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000 -#define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000 -#define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000) +#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000) +#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000) +#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000) -#define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000 -#define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000 -#define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000 -#define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000 -#define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000 +#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000) +#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000) +#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000) +#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000) +#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000) #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -122,13 +122,14 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000 -#define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000 -#define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000 -#define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000 -#define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000 -#define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000 +#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000) +#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000) +#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000) +#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000) +#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000) +#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000) +#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE) struct gpio_bank { void __iomem *base; @@ -160,7 +161,7 @@ struct gpio_bank { #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, + { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, @@ -170,14 +171,14 @@ static struct gpio_bank gpio_bank_1610[5] = { #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } }; #endif #ifdef CONFIG_ARCH_OMAP730 static struct gpio_bank gpio_bank_730[7] = { - { OMAP_MPUIO_BASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, @@ -1389,7 +1390,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1408,7 +1409,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1417,7 +1418,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1428,7 +1429,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1437,10 +1438,9 @@ static int __init _omap_gpio_init(void) int j, gpio_count = 16; bank = &gpio_bank[i]; - bank->base = IO_ADDRESS(bank->base); spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) - omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); + __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h index cf1dc0223949..10d449ea7ed0 100644 --- a/arch/arm/plat-omap/include/mach/board-2430sdp.h +++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h @@ -30,10 +30,12 @@ #define __ASM_ARCH_OMAP_2430SDP_H /* Placeholder for 2430SDP specific defines */ -#define OMAP24XX_ETHR_START 0x08000300 +#define OMAP24XX_ETHR_START 0x08000300 #define OMAP24XX_ETHR_GPIO_IRQ 149 #define SDP2430_CS0_BASE 0x04000000 -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ +/* Function prototypes */ +extern void sdp2430_flash_init(void); +extern void sdp2430_usb_init(void); #endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h index d6f2a8e963d5..731c858cf3fe 100644 --- a/arch/arm/plat-omap/include/mach/board-apollon.h +++ b/arch/arm/plat-omap/include/mach/board-apollon.h @@ -31,6 +31,12 @@ extern void apollon_mmc_init(void); +static inline int apollon_plus(void) +{ + /* The apollon plus has IDCODE revision 5 */ + return system_rev & 0xc0; +} + /* Placeholder for APOLLON specific defines */ #define APOLLON_ETHR_GPIO_IRQ 74 diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h index 1470cd3e519b..7c3fa0f0a65e 100644 --- a/arch/arm/plat-omap/include/mach/board-h4.h +++ b/arch/arm/plat-omap/include/mach/board-h4.h @@ -1,7 +1,7 @@ /* * arch/arm/plat-omap/include/mach/board-h4.h * - * Hardware definitions for TI OMAP1610 H4 board. + * Hardware definitions for TI OMAP2420 H4 board. * * Initial creation by Dirk Behme <dirk.behme@de.bosch.com> * @@ -29,6 +29,9 @@ #ifndef __ASM_ARCH_OMAP_H4_H #define __ASM_ARCH_OMAP_H4_H +/* MMC Prototypes */ +extern void h4_mmc_init(void); + /* Placeholder for H4 specific defines */ #define OMAP24XX_ETHR_GPIO_IRQ 92 #endif /* __ASM_ARCH_OMAP_H4_H */ diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h new file mode 100644 index 000000000000..66e2746c04ca --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-ldp.h @@ -0,0 +1,36 @@ +/* + * arch/arm/plat-omap/include/mach/board-ldp.h + * + * Hardware definitions for TI OMAP3 LDP. + * + * Copyright (C) 2008 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_LDP_H +#define __ASM_ARCH_OMAP_LDP_H + +extern void twl4030_bci_battery_init(void); + +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ + +#endif /* __ASM_ARCH_OMAP_LDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h new file mode 100644 index 000000000000..3080d52d877a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-omap3beagle.h @@ -0,0 +1,33 @@ +/* + * arch/arm/plat-omap/include/mach/board-omap3beagle.h + * + * Hardware definitions for TI OMAP3 BEAGLE. + * + * Initial creation by Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP3_BEAGLE_H +#define __ASM_ARCH_OMAP3_BEAGLE_H + +#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ + diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h new file mode 100644 index 000000000000..7ecae66966d1 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-overo.h @@ -0,0 +1,26 @@ +/* + * board-overo.h (Gumstix Overo) + * + * Initial code: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OVERO_H +#define __ASM_ARCH_OVERO_H + +#define OVERO_GPIO_BT_XGATE 15 +#define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_BT_NRESET 164 +#define OVERO_GPIO_USBH_CPEN 168 +#define OVERO_GPIO_USBH_NRESET 183 + +#endif /* ____ASM_ARCH_OVERO_H */ + diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h index 54445642f35d..c23c12ccb353 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/mach/board.h @@ -45,6 +45,8 @@ struct omap_mmc_conf { unsigned cover:1; /* 4 wire signaling is optional, and is only used for SD/SDIO */ unsigned wire4:1; + /* use the internal clock */ + unsigned internal_clock:1; s16 power_pin; s16 switch_pin; s16 wp_pin; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index 92f7c7238fcd..719298554ed7 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -15,6 +15,7 @@ struct module; struct clk; +struct clockdomain; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) @@ -79,6 +80,8 @@ struct clk { u32 clksel_mask; const struct clksel *clksel; struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; #else __u8 rate_offset; __u8 src_offset; diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h new file mode 100644 index 000000000000..1f51f0173784 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/clockdomain.h @@ -0,0 +1,106 @@ +/* + * linux/include/asm-arm/arch-omap/clockdomain.h + * + * OMAP2/3 clockdomain framework functions + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Copyright (C) 2008 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H +#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H + +#include <mach/powerdomain.h> +#include <mach/clock.h> +#include <mach/cpu.h> + +/* Clockdomain capability flags */ +#define CLKDM_CAN_FORCE_SLEEP (1 << 0) +#define CLKDM_CAN_FORCE_WAKEUP (1 << 1) +#define CLKDM_CAN_ENABLE_AUTO (1 << 2) +#define CLKDM_CAN_DISABLE_AUTO (1 << 3) + +#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) +#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) +#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP) + +/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */ +#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1 + +/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */ +#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0 +#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1 +#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2 +#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3 + +/* + * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps + * and sleepdeps added when a powerdomain should stay active in hwsup mode; + * and conversely, removed when the powerdomain should be allowed to go + * inactive in hwsup mode. + */ +struct clkdm_pwrdm_autodep { + + /* Name of the powerdomain to add a wkdep/sleepdep on */ + const char *pwrdm_name; + + /* Powerdomain pointer (looked up at clkdm_init() time) */ + struct powerdomain *pwrdm; + + /* OMAP chip types that this clockdomain dep is valid on */ + const struct omap_chip_id omap_chip; + +}; + +struct clockdomain { + + /* Clockdomain name */ + const char *name; + + /* Powerdomain enclosing this clockdomain */ + const char *pwrdm_name; + + /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */ + const u16 clktrctrl_mask; + + /* Clockdomain capability flags */ + const u8 flags; + + /* OMAP chip types that this clockdomain is valid on */ + const struct omap_chip_id omap_chip; + + /* Usecount tracking */ + atomic_t usecount; + + /* Powerdomain pointer assigned at clkdm_register() */ + struct powerdomain *pwrdm; + + struct list_head node; + +}; + +void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps); +int clkdm_register(struct clockdomain *clkdm); +int clkdm_unregister(struct clockdomain *clkdm); +struct clockdomain *clkdm_lookup(const char *name); + +int clkdm_for_each(int (*fn)(struct clockdomain *clkdm)); +struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm); + +void omap2_clkdm_allow_idle(struct clockdomain *clkdm); +void omap2_clkdm_deny_idle(struct clockdomain *clkdm); + +int omap2_clkdm_wakeup(struct clockdomain *clkdm); +int omap2_clkdm_sleep(struct clockdomain *clkdm); + +int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); +int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); + +#endif diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 06093112b665..ef70e2b0f054 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -34,6 +34,7 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); +extern void omap_serial_enable_clocks(int enable); #ifdef CONFIG_I2C_OMAP extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, @@ -49,6 +50,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, /* IO bases for various OMAP processors */ struct omap_globals { + u32 class; /* OMAP class to detect */ void __iomem *tap; /* Control module ID code */ void __iomem *sdrc; /* SDRAM Controller */ void __iomem *sms; /* SDRAM Memory Scheduler */ @@ -62,6 +64,7 @@ void omap2_set_globals_243x(void); void omap2_set_globals_343x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_memory(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index e3fd62d9a995..dc9886760577 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -1,13 +1,10 @@ -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - /* * arch/arm/plat-omap/include/mach/control.h * * OMAP2/3 System Control Module definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley * @@ -16,14 +13,23 @@ * the Free Software Foundation. */ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + #include <mach/io.h> +#ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#else +#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#endif /* __ASSEMBLY__ */ /* * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for @@ -134,6 +140,7 @@ #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) /* * REVISIT: This list of registers is not comprehensive - there are more diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 05aee0eda34f..e0464187209d 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -346,9 +346,14 @@ IS_OMAP_TYPE(3430, 0x3430) get_sil_revision(system_rev) /* Various silicon macros defined here */ +#define OMAP242X_CLASS 0x24200000 #define OMAP2420_REV_ES1_0 0x24200000 #define OMAP2420_REV_ES2_0 0x24201000 + +#define OMAP243X_CLASS 0x24300000 #define OMAP2430_REV_ES1_0 0x24300000 + +#define OMAP343X_CLASS 0x34300000 #define OMAP3430_REV_ES1_0 0x34300000 #define OMAP3430_REV_ES2_0 0x34301000 #define OMAP3430_REV_ES2_1 0x34302000 diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index 1b0039bdeb4e..1b11f5c6a2d9 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -35,6 +35,18 @@ #ifdef CONFIG_OMAP_LL_DEBUG_UART3 add \rx, \rx, #0x00004000 @ UART 3 #endif + +#elif CONFIG_ARCH_OMAP3 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xd8000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00fb0000 @ UART 3 + add \rx, \rx, #0x00006000 +#endif #endif .endm diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index d4e9043bf201..030118ee204a 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -55,9 +55,17 @@ 1510: .endm -#elif defined(CONFIG_ARCH_OMAP24XX) +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) #include <mach/omap24xx.h> +#endif +#if defined(CONFIG_ARCH_OMAP34XX) +#include <mach/omap34xx.h> +#endif + +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */ .macro disable_fiq .endm @@ -79,7 +87,7 @@ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 2222: - ldrne \irqnr, [\base, #IRQ_SIR_IRQ] + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] .endm diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h index c92e4b42b289..f1864a652f7a 100644 --- a/arch/arm/plat-omap/include/mach/fpga.h +++ b/arch/arm/plat-omap/include/mach/fpga.h @@ -34,9 +34,9 @@ extern void omap1510_fpga_init_irq(void); * --------------------------------------------------------------------------- */ /* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ +#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ #define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) #define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ @@ -85,9 +85,9 @@ struct h2p2_dbg_fpga { * OMAP-1510 FPGA * --------------------------------------------------------------------------- */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* Physical */ +#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ /* Revision */ #define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 8c71e288860f..98e9008b7e9d 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -29,7 +29,7 @@ #include <linux/io.h> #include <mach/irqs.h> -#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 +#define OMAP_MPUIO_BASE 0xfffb5000 #ifdef CONFIG_ARCH_OMAP730 #define OMAP_MPUIO_INPUT_LATCH 0x00 @@ -76,6 +76,8 @@ extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); extern void omap_set_gpio_dataout(int gpio, int enable); extern int omap_get_gpio_datain(int gpio); +extern void omap2_gpio_prepare_for_retention(void); +extern void omap2_gpio_resume_after_retention(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 6a8e07ffc2d0..45b678439bb7 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -11,6 +11,9 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +/* Maximum Number of Chip Selects */ +#define GPMC_CS_NUM 8 + #define GPMC_CS_CONFIG1 0x00 #define GPMC_CS_CONFIG2 0x04 #define GPMC_CS_CONFIG3 0x08 @@ -22,6 +25,9 @@ #define GPMC_CS_NAND_ADDRESS 0x20 #define GPMC_CS_NAND_DATA 0x24 +#define GPMC_CONFIG 0x50 +#define GPMC_STATUS 0x54 + #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) #define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) @@ -78,9 +84,14 @@ struct gpmc_timings { u16 access; /* Start-cycle to first data valid delay */ u16 rd_cycle; /* Total read cycle time */ u16 wr_cycle; /* Total write cycle time */ + + /* The following are only on OMAP3430 */ + u16 wr_access; /* WRACCESSTIME */ + u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); extern unsigned long gpmc_get_fclk_period(void); @@ -92,5 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); +extern void gpmc_init(void); #endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 07f5d7f21528..6589ddbb63b2 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -89,7 +89,7 @@ #define DPLL_CTL (0xfffecf00) /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) @@ -282,8 +282,8 @@ #include "omap730.h" #include "omap1510.h" -#include "omap24xx.h" #include "omap16xx.h" +#include "omap24xx.h" #include "omap34xx.h" #ifndef __ASSEMBLER__ @@ -322,6 +322,14 @@ #include "board-2430sdp.h" #endif +#ifdef CONFIG_MACH_OMAP3_BEAGLE +#include "board-omap3beagle.h" +#endif + +#ifdef CONFIG_MACH_OMAP_LDP +#include "board-ldp.h" +#endif + #ifdef CONFIG_MACH_OMAP_APOLLON #include "board-apollon.h" #endif diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 2a30b7d88cde..adc83b7b8205 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -55,14 +55,13 @@ #if defined(CONFIG_ARCH_OMAP1) -#define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define IO_SIZE 0x40000 -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define io_p2v(pa) ((pa) - IO_OFFSET) -#define io_v2p(va) ((va) + IO_OFFSET) +#define IO_PHYS 0xFFFB0000 +#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_SIZE 0x40000 +#define IO_VIRT (IO_PHYS - IO_OFFSET) +#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define io_v2p(va) ((va) + IO_OFFSET) #elif defined(CONFIG_ARCH_OMAP2) @@ -74,7 +73,6 @@ #define L4_24XX_VIRT 0xd8000000 #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#ifdef CONFIG_ARCH_OMAP2430 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ #define L4_WK_243X_VIRT 0xd9000000 #define L4_WK_243X_SIZE SZ_1M @@ -88,13 +86,10 @@ #define OMAP243X_SMS_VIRT 0xFC000000 #define OMAP243X_SMS_SIZE SZ_1M -#endif - -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ +#define IO_OFFSET 0x90000000 +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ /* DSP */ #define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ @@ -149,9 +144,8 @@ #define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ #define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ /* DSP */ @@ -167,7 +161,14 @@ #endif -#ifndef __ASSEMBLER__ +#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) +#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa)) +#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) + +#ifdef __ASSEMBLER__ +#define IOMEM(x) x +#else +#define IOMEM(x) ((void __force __iomem *)(x)) /* * Functions to access the OMAP IO region @@ -178,13 +179,13 @@ * - DO NOT use hardcoded virtual addresses to allow changing the * IO address space again if needed */ -#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) +#define omap_readb(a) __raw_readb(IO_ADDRESS(a)) +#define omap_readw(a) __raw_readw(IO_ADDRESS(a)) +#define omap_readl(a) __raw_readl(IO_ADDRESS(a)) -#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) +#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a)) +#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) +#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); @@ -192,6 +193,12 @@ extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); extern void omap2_init_common_hw(void); +#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) +#define __arch_iounmap(v) omap_iounmap(v) + +void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); +void omap_iounmap(volatile void __iomem *addr); + #endif #endif diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 62aa7dfb9464..a2929ac8c687 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -125,6 +125,7 @@ #define INT_UART2 (15 + IH2_BASE) #define INT_BT_MCSI1TX (16 + IH2_BASE) #define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_SOSSI_MATCH (19 + IH2_BASE) #define INT_USB_W2FC (20 + IH2_BASE) #define INT_1WIRE (21 + IH2_BASE) #define INT_OS_TIMER (22 + IH2_BASE) @@ -176,6 +177,7 @@ #define INT_1610_DMA_CH14 (61 + IH2_BASE) #define INT_1610_DMA_CH15 (62 + IH2_BASE) #define INT_1610_NAND (63 + IH2_BASE) +#define INT_1610_SHA1MD5 (91 + IH2_BASE) /* * OMAP-730 specific IRQ numbers for interrupt handler 2 @@ -263,12 +265,18 @@ #define INT_24XX_GPTIMER10 46 #define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER12 48 +#define INT_24XX_SHA1MD5 51 +#define INT_24XX_MCBSP4_IRQ_TX 54 +#define INT_24XX_MCBSP4_IRQ_RX 55 #define INT_24XX_I2C1_IRQ 56 #define INT_24XX_I2C2_IRQ 57 +#define INT_24XX_HDQ_IRQ 58 #define INT_24XX_MCBSP1_IRQ_TX 59 #define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP2_IRQ_TX 62 #define INT_24XX_MCBSP2_IRQ_RX 63 +#define INT_24XX_SPI1_IRQ 65 +#define INT_24XX_SPI2_IRQ 66 #define INT_24XX_UART1_IRQ 72 #define INT_24XX_UART2_IRQ 73 #define INT_24XX_UART3_IRQ 74 @@ -278,7 +286,58 @@ #define INT_24XX_USB_IRQ_HGEN 78 #define INT_24XX_USB_IRQ_HSOF 79 #define INT_24XX_USB_IRQ_OTG 80 +#define INT_24XX_MCBSP5_IRQ_TX 81 +#define INT_24XX_MCBSP5_IRQ_RX 82 #define INT_24XX_MMC_IRQ 83 +#define INT_24XX_MMC2_IRQ 86 +#define INT_24XX_MCBSP3_IRQ_TX 89 +#define INT_24XX_MCBSP3_IRQ_RX 90 +#define INT_24XX_SPI3_IRQ 91 + +#define INT_243X_MCBSP2_IRQ 16 +#define INT_243X_MCBSP3_IRQ 17 +#define INT_243X_MCBSP4_IRQ 18 +#define INT_243X_MCBSP5_IRQ 19 +#define INT_243X_MCBSP1_IRQ 64 +#define INT_243X_HS_USB_MC 92 +#define INT_243X_HS_USB_DMA 93 +#define INT_243X_CARKIT_IRQ 94 + +#define INT_34XX_BENCH_MPU_EMUL 3 +#define INT_34XX_ST_MCBSP2_IRQ 4 +#define INT_34XX_ST_MCBSP3_IRQ 5 +#define INT_34XX_SSM_ABORT_IRQ 6 +#define INT_34XX_SYS_NIRQ 7 +#define INT_34XX_D2D_FW_IRQ 8 +#define INT_34XX_PRCM_MPU_IRQ 11 +#define INT_34XX_MCBSP1_IRQ 16 +#define INT_34XX_MCBSP2_IRQ 17 +#define INT_34XX_MCBSP3_IRQ 22 +#define INT_34XX_MCBSP4_IRQ 23 +#define INT_34XX_CAM_IRQ 24 +#define INT_34XX_MCBSP5_IRQ 27 +#define INT_34XX_GPIO_BANK1 29 +#define INT_34XX_GPIO_BANK2 30 +#define INT_34XX_GPIO_BANK3 31 +#define INT_34XX_GPIO_BANK4 32 +#define INT_34XX_GPIO_BANK5 33 +#define INT_34XX_GPIO_BANK6 34 +#define INT_34XX_USIM_IRQ 35 +#define INT_34XX_WDT3_IRQ 36 +#define INT_34XX_SPI4_IRQ 48 +#define INT_34XX_SHA1MD52_IRQ 49 +#define INT_34XX_FPKA_READY_IRQ 50 +#define INT_34XX_SHA1MD51_IRQ 51 +#define INT_34XX_RNG_IRQ 52 +#define INT_34XX_I2C3_IRQ 61 +#define INT_34XX_FPKA_ERROR_IRQ 64 +#define INT_34XX_PBIAS_IRQ 75 +#define INT_34XX_OHCI_IRQ 76 +#define INT_34XX_EHCI_IRQ 77 +#define INT_34XX_TLL_IRQ 78 +#define INT_34XX_PARTHASH_IRQ 79 +#define INT_34XX_MMC3_IRQ 94 +#define INT_34XX_GPT12_IRQ 95 #define INT_34XX_BENCH_MPU_EMUL 3 diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 8fdb95e26fcd..6a0d1a0a24a7 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -43,9 +43,15 @@ #define OMAP24XX_MCBSP1_BASE 0x48074000 #define OMAP24XX_MCBSP2_BASE 0x48076000 +#define OMAP2430_MCBSP3_BASE 0x4808c000 +#define OMAP2430_MCBSP4_BASE 0x4808e000 +#define OMAP2430_MCBSP5_BASE 0x48096000 #define OMAP34XX_MCBSP1_BASE 0x48074000 #define OMAP34XX_MCBSP2_BASE 0x49022000 +#define OMAP34XX_MCBSP3_BASE 0x49024000 +#define OMAP34XX_MCBSP4_BASE 0x49026000 +#define OMAP34XX_MCBSP5_BASE 0x48096000 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) @@ -81,9 +87,6 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C -#define OMAP_MAX_MCBSP_COUNT 3 -#define MAX_MCBSP_CLOCKS 3 - #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -91,12 +94,14 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP24XX) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x04 #define OMAP_MCBSP_REG_DXR2 0x08 #define OMAP_MCBSP_REG_DXR1 0x0C +#define OMAP_MCBSP_REG_DRR 0x00 +#define OMAP_MCBSP_REG_DXR 0x08 #define OMAP_MCBSP_REG_SPCR2 0x10 #define OMAP_MCBSP_REG_SPCR1 0x14 #define OMAP_MCBSP_REG_RCR2 0x18 @@ -124,9 +129,9 @@ #define OMAP_MCBSP_REG_RCERH 0x70 #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 - -#define OMAP_MAX_MCBSP_COUNT 2 -#define MAX_MCBSP_CLOCKS 2 +#define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_XCCR 0xAC +#define OMAP_MCBSP_REG_RCCR 0xB0 #define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) @@ -137,10 +142,6 @@ #endif -#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) -#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) - - /************************** McBSP SPCR1 bit definitions ***********************/ #define RRST 0x0001 #define RRDY 0x0002 @@ -151,6 +152,7 @@ #define DXENA 0x0080 #define CLKSTP(value) ((value)<<11) /* bits 11:12 */ #define RJUST(value) ((value)<<13) /* bits 13:14 */ +#define ALB 0x8000 #define DLB 0x8000 /************************** McBSP SPCR2 bit definitions ***********************/ @@ -228,6 +230,17 @@ #define XPABLK(value) ((value)<<5) /* Bits 5:6 */ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ +/*********************** McBSP XCCR bit definitions *************************/ +#define DILB 0x0020 +#define XDMAEN 0x0008 +#define XDISABLE 0x0001 + +/********************** McBSP RCCR bit definitions *************************/ +#define RDMAEN 0x0008 +#define RDISABLE 0x0001 + +/********************** McBSP SYSCONFIG bit definitions ********************/ +#define SOFTRST 0x0002 /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { @@ -260,6 +273,8 @@ typedef enum { OMAP_MCBSP1 = 0, OMAP_MCBSP2, OMAP_MCBSP3, + OMAP_MCBSP4, + OMAP_MCBSP5 } omap_mcbsp_id; typedef int __bitwise omap_mcbsp_io_type_t; @@ -311,12 +326,10 @@ struct omap_mcbsp_spi_cfg { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); - int (*check)(unsigned int); }; struct omap_mcbsp_platform_data { unsigned long phys_base; - u32 virt_base; u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; @@ -326,7 +339,7 @@ struct omap_mcbsp_platform_data { struct omap_mcbsp { struct device *dev; unsigned long phys_base; - u32 io_base; + void __iomem *io_base; u8 id; u8 free; omap_mcbsp_word_length rx_word_length; @@ -354,6 +367,8 @@ struct omap_mcbsp { struct omap_mcbsp_platform_data *pdata; struct clk *clk; }; +extern struct omap_mcbsp **mcbsp_ptr; +extern int omap_mcbsp_count; int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, @@ -378,5 +393,6 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * /* Polled read/write functions */ int omap_mcbsp_pollread(unsigned int id, u16 * buf); int omap_mcbsp_pollwrite(unsigned int id, u16 buf); +int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); #endif diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index a325caf80d04..d40cac60b959 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -38,7 +38,7 @@ */ #if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 614b2c1327c7..6bbf1789bed5 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -125,20 +125,64 @@ .pu_pd_val = pull_mode, \ }, - -#define PULL_DISABLED 0 -#define PULL_ENABLED 1 - -#define PULL_DOWN 0 -#define PULL_UP 1 +/* 24xx/34xx mux bit defines */ +#define OMAP2_PULL_ENA (1 << 3) +#define OMAP2_PULL_UP (1 << 4) +#define OMAP2_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP3_INPUT_EN (1 << 8) +#define OMAP3_OFF_EN (1 << 9) +#define OMAP3_OFFOUT_EN (1 << 10) +#define OMAP3_OFFOUT_VAL (1 << 11) +#define OMAP3_OFF_PULL_EN (1 << 12) +#define OMAP3_OFF_PULL_UP (1 << 13) +#define OMAP3_WAKEUP_EN (1 << 14) + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP34XX_MUX_MODE0 0 +#define OMAP34XX_MUX_MODE1 1 +#define OMAP34XX_MUX_MODE2 2 +#define OMAP34XX_MUX_MODE3 3 +#define OMAP34XX_MUX_MODE4 4 +#define OMAP34XX_MUX_MODE5 5 +#define OMAP34XX_MUX_MODE6 6 +#define OMAP34XX_MUX_MODE7 7 + +/* 34xx active pin states */ +#define OMAP34XX_PIN_OUTPUT 0 +#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN +#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ + | OMAP2_PULL_UP) +#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) + +/* 34xx off mode states */ +#define OMAP34XX_PIN_OFF_NONE 0 +#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ + | OMAP3_OFFOUT_VAL) +#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) +#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ + | OMAP3_OFF_PULL_UP) +#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) +#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN + +#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ + .name = desc, \ + .debug = 0, \ + .mux_reg = reg_offset, \ + .mux_val = mux_value \ +}, struct pin_config { - char *name; - unsigned char busy; - unsigned char debug; + char *name; + const unsigned int mux_reg; + unsigned char debug; - const char *mux_reg_name; - const unsigned int mux_reg; +#if defined(CONFIG_ARCH_OMAP34XX) + u16 mux_val; /* Wake-up, off mode, pull, mux mode */ +#endif + +#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -150,6 +194,12 @@ struct pin_config { const char *pu_pd_name; const unsigned int pu_pd_reg; const unsigned char pu_pd_val; +#endif + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + const char *mux_reg_name; +#endif + }; enum omap730_index { @@ -593,6 +643,114 @@ enum omap24xx_index { }; +enum omap34xx_index { + /* 34xx I2C */ + K21_34XX_I2C1_SCL, + J21_34XX_I2C1_SDA, + AF15_34XX_I2C2_SCL, + AE15_34XX_I2C2_SDA, + AF14_34XX_I2C3_SCL, + AG14_34XX_I2C3_SDA, + AD26_34XX_I2C4_SCL, + AE26_34XX_I2C4_SDA, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ + Y8_3430_USB1HS_PHY_CLK, + Y9_3430_USB1HS_PHY_STP, + AA14_3430_USB1HS_PHY_DIR, + AA11_3430_USB1HS_PHY_NXT, + W13_3430_USB1HS_PHY_DATA0, + W12_3430_USB1HS_PHY_DATA1, + W11_3430_USB1HS_PHY_DATA2, + Y11_3430_USB1HS_PHY_DATA3, + W9_3430_USB1HS_PHY_DATA4, + Y12_3430_USB1HS_PHY_DATA5, + W8_3430_USB1HS_PHY_DATA6, + Y13_3430_USB1HS_PHY_DATA7, + + /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ + AA8_3430_USB2HS_PHY_CLK, + AA10_3430_USB2HS_PHY_STP, + AA9_3430_USB2HS_PHY_DIR, + AB11_3430_USB2HS_PHY_NXT, + AB10_3430_USB2HS_PHY_DATA0, + AB9_3430_USB2HS_PHY_DATA1, + W3_3430_USB2HS_PHY_DATA2, + T4_3430_USB2HS_PHY_DATA3, + T3_3430_USB2HS_PHY_DATA4, + R3_3430_USB2HS_PHY_DATA5, + R4_3430_USB2HS_PHY_DATA6, + T2_3430_USB2HS_PHY_DATA7, + + + /* TLL - HSUSB: 12-pin TLL Port 1*/ + Y8_3430_USB1HS_TLL_CLK, + Y9_3430_USB1HS_TLL_STP, + AA14_3430_USB1HS_TLL_DIR, + AA11_3430_USB1HS_TLL_NXT, + W13_3430_USB1HS_TLL_DATA0, + W12_3430_USB1HS_TLL_DATA1, + W11_3430_USB1HS_TLL_DATA2, + Y11_3430_USB1HS_TLL_DATA3, + W9_3430_USB1HS_TLL_DATA4, + Y12_3430_USB1HS_TLL_DATA5, + W8_3430_USB1HS_TLL_DATA6, + Y13_3430_USB1HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 2*/ + AA8_3430_USB2HS_TLL_CLK, + AA10_3430_USB2HS_TLL_STP, + AA9_3430_USB2HS_TLL_DIR, + AB11_3430_USB2HS_TLL_NXT, + AB10_3430_USB2HS_TLL_DATA0, + AB9_3430_USB2HS_TLL_DATA1, + W3_3430_USB2HS_TLL_DATA2, + T4_3430_USB2HS_TLL_DATA3, + T3_3430_USB2HS_TLL_DATA4, + R3_3430_USB2HS_TLL_DATA5, + R4_3430_USB2HS_TLL_DATA6, + T2_3430_USB2HS_TLL_DATA7, + + /* TLL - HSUSB: 12-pin TLL Port 3*/ + AA6_3430_USB3HS_TLL_CLK, + AB3_3430_USB3HS_TLL_STP, + AA3_3430_USB3HS_TLL_DIR, + Y3_3430_USB3HS_TLL_NXT, + AA5_3430_USB3HS_TLL_DATA0, + Y4_3430_USB3HS_TLL_DATA1, + Y5_3430_USB3HS_TLL_DATA2, + W5_3430_USB3HS_TLL_DATA3, + AB12_3430_USB3HS_TLL_DATA4, + AB13_3430_USB3HS_TLL_DATA5, + AA13_3430_USB3HS_TLL_DATA6, + AA12_3430_USB3HS_TLL_DATA7, + + /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ + AF10_3430_USB1FS_PHY_MM1_RXDP, + AG9_3430_USB1FS_PHY_MM1_RXDM, + W13_3430_USB1FS_PHY_MM1_RXRCV, + W12_3430_USB1FS_PHY_MM1_TXSE0, + W11_3430_USB1FS_PHY_MM1_TXDAT, + Y11_3430_USB1FS_PHY_MM1_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ + AF7_3430_USB2FS_PHY_MM2_RXDP, + AH7_3430_USB2FS_PHY_MM2_RXDM, + AB10_3430_USB2FS_PHY_MM2_RXRCV, + AB9_3430_USB2FS_PHY_MM2_TXSE0, + W3_3430_USB2FS_PHY_MM2_TXDAT, + T4_3430_USB2FS_PHY_MM2_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ + AH3_3430_USB3FS_PHY_MM3_RXDP, + AE3_3430_USB3FS_PHY_MM3_RXDM, + AD1_3430_USB3FS_PHY_MM3_RXRCV, + AE1_3430_USB3FS_PHY_MM3_TXSE0, + AD2_3430_USB3FS_PHY_MM3_TXDAT, + AC1_3430_USB3FS_PHY_MM3_TXEN_N, + +}; + struct omap_mux_cfg { struct pin_config *pins; unsigned long size; diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h index 505a38af8b22..d24004668138 100644 --- a/arch/arm/plat-omap/include/mach/omap1510.h +++ b/arch/arm/plat-omap/include/mach/omap1510.h @@ -44,5 +44,7 @@ #define OMAP1510_DSPREG_SIZE SZ_128K #define OMAP1510_DSPREG_START 0xE1000000 +#define OMAP1510_DSP_MMU_BASE (0xfffed200) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h index c6c93afb2788..0e69b504c25f 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/mach/omap16xx.h @@ -44,6 +44,11 @@ #define OMAP16XX_DSPREG_SIZE SZ_128K #define OMAP16XX_DSPREG_START 0xE1000000 +#define OMAP16XX_SEC_BASE 0xFFFE4000 +#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) +#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) +#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) + /* * --------------------------------------------------------------------------- * Interrupts @@ -190,7 +195,7 @@ #define WSPR_DISABLE_0 (0x0000aaaa) #define WSPR_DISABLE_1 (0x00005555) -/* Mailbox */ +#define OMAP16XX_DSP_MMU_BASE (0xfffed200) #define OMAP16XX_MAILBOX_BASE (0xfffcf000) #endif /* __ASM_ARCH_OMAP16XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index bb8319d66e9f..24335d4932f5 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -39,7 +39,6 @@ /* interrupt controller */ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 #define OMAP2420_CTRL_BASE L4_24XX_BASE #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) @@ -48,6 +47,7 @@ #define OMAP2420_PRM_BASE OMAP2420_CM_BASE #define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) #define OMAP2420_SMS_BASE 0x68008000 +#define OMAP2420_GPMC_BASE 0x6800a000 #define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) #define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h index cae037d13079..ec67fb428607 100644 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ b/arch/arm/plat-omap/include/mach/omapfb.h @@ -62,6 +62,7 @@ #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 #define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 #define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 #define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 /* Values from DSP must map to lower 16-bits */ @@ -305,6 +306,7 @@ struct lcd_ctrl { int screen_width, int pos_x, int pos_y, int width, int height, int color_mode); + int (*set_rotate) (int angle); int (*setup_mem) (int plane, size_t size, int mem_type, unsigned long *paddr); int (*mmap) (struct fb_info *info, @@ -374,6 +376,7 @@ extern struct lcd_ctrl omap1_lcd_ctrl; extern struct lcd_ctrl omap2_disp_ctrl; #endif +extern void omapfb_reserve_sdram(void); extern void omapfb_register_panel(struct lcd_panel *panel); extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); extern void omapfb_notify_clients(struct omapfb_device *fbdev, diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index bfa09325a5ff..768eb6e7abcf 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -39,11 +39,11 @@ * Register and offset definitions to be used in PM assembler code * ---------------------------------------------------------------------------- */ -#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) +#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00) #define ARM_IDLECT1_ASM_OFFSET 0x04 #define ARM_IDLECT2_ASM_OFFSET 0x08 -#define TCMIF_ASM_BASE io_p2v(0xfffecc00) +#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00) #define EMIFS_CONFIG_ASM_OFFSET 0x0c #define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 @@ -135,7 +135,8 @@ extern void omap_pm_suspend(void); extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision); +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h new file mode 100644 index 000000000000..2806a9c8e4d7 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/powerdomain.h @@ -0,0 +1,166 @@ +/* + * OMAP2/3 powerdomain control + * + * Copyright (C) 2007-8 Texas Instruments, Inc. + * Copyright (C) 2007-8 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN +#define ASM_ARM_ARCH_OMAP_POWERDOMAIN + +#include <linux/types.h> +#include <linux/list.h> + +#include <asm/atomic.h> + +#include <mach/cpu.h> + + +/* Powerdomain basic power states */ +#define PWRDM_POWER_OFF 0x0 +#define PWRDM_POWER_RET 0x1 +#define PWRDM_POWER_INACTIVE 0x2 +#define PWRDM_POWER_ON 0x3 + +/* Powerdomain allowable state bitfields */ +#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_ON)) + +#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \ + (1 << PWRDM_POWER_RET)) + +#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON)) + + +/* Powerdomain flags */ +#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ + + +/* + * Number of memory banks that are power-controllable. On OMAP3430, the + * maximum is 4. + */ +#define PWRDM_MAX_MEM_BANKS 4 + +/* + * Maximum number of clockdomains that can be associated with a powerdomain. + * CORE powerdomain is probably the worst case. + */ +#define PWRDM_MAX_CLKDMS 3 + +/* XXX A completely arbitrary number. What is reasonable here? */ +#define PWRDM_TRANSITION_BAILOUT 100000 + +struct clockdomain; +struct powerdomain; + +/* Encodes dependencies between powerdomains - statically defined */ +struct pwrdm_dep { + + /* Powerdomain name */ + const char *pwrdm_name; + + /* Powerdomain pointer - resolved by the powerdomain code */ + struct powerdomain *pwrdm; + + /* Flags to mark OMAP chip restrictions, etc. */ + const struct omap_chip_id omap_chip; + +}; + +struct powerdomain { + + /* Powerdomain name */ + const char *name; + + /* the address offset from CM_BASE/PRM_BASE */ + const s16 prcm_offs; + + /* Used to represent the OMAP chip types containing this pwrdm */ + const struct omap_chip_id omap_chip; + + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + + /* Powerdomains that can be told to wake this powerdomain up */ + struct pwrdm_dep *wkdep_srcs; + + /* Powerdomains that can be told to keep this pwrdm from inactivity */ + struct pwrdm_dep *sleepdep_srcs; + + /* Possible powerdomain power states */ + const u8 pwrsts; + + /* Possible logic power states when pwrdm in RETENTION */ + const u8 pwrsts_logic_ret; + + /* Powerdomain flags */ + const u8 flags; + + /* Number of software-controllable memory banks in this powerdomain */ + const u8 banks; + + /* Possible memory bank pwrstates when pwrdm in RETENTION */ + const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS]; + + /* Possible memory bank pwrstates when pwrdm is ON */ + const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS]; + + /* Clockdomains in this powerdomain */ + struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; + + struct list_head node; + +}; + + +void pwrdm_init(struct powerdomain **pwrdm_list); + +int pwrdm_register(struct powerdomain *pwrdm); +int pwrdm_unregister(struct powerdomain *pwrdm); +struct powerdomain *pwrdm_lookup(const char *name); + +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm)); + +int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); +int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, + int (*fn)(struct powerdomain *pwrdm, + struct clockdomain *clkdm)); + +int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); +int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2); + +int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); + +int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm); +int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm); + +int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); +int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); +int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst); + +int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm); +int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank); + +int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm); +int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm); +bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); + +int pwrdm_wait_transition(struct powerdomain *pwrdm); + +#endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 787b7acec546..a98c6c3beb2c 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -25,6 +25,8 @@ #define SDRC_DLLB_STATUS 0x06C #define SDRC_POWER 0x070 #define SDRC_MR_0 0x084 +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 /* @@ -63,9 +65,9 @@ */ -#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) +#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index cc6bfa51ccb5..8a676a04be48 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -20,18 +20,24 @@ #define OMAP_UART1_BASE 0x4806a000 #define OMAP_UART2_BASE 0x4806c000 #define OMAP_UART3_BASE 0x4806e000 +#elif defined(CONFIG_ARCH_OMAP3) +/* OMAP3 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x49020000 #endif #define OMAP_MAX_NR_PORTS 3 #define OMAP1510_BASE_BAUD (12000000/16) #define OMAP16XX_BASE_BAUD (48000000/16) +#define OMAP24XX_BASE_BAUD (48000000/16) -#define is_omap_port(p) ({int __ret = 0; \ - if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ - p == IO_ADDRESS(OMAP_UART2_BASE) || \ - p == IO_ADDRESS(OMAP_UART3_BASE)) \ - __ret = 1; \ - __ret; \ +#define is_omap_port(pt) ({int __ret = 0; \ + if ((pt)->port.mapbase == OMAP_UART1_BASE || \ + (pt)->port.mapbase == OMAP_UART2_BASE || \ + (pt)->port.mapbase == OMAP_UART3_BASE) \ + __ret = 1; \ + __ret; \ }) #endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index e09323449981..ab35d622dcf5 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); +extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); + /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap1_sram_reprogram_clock_sz; @@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); +extern unsigned long omap3_sram_configure_core_dpll_sz; + #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 06a28c7b98de..06923f261545 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode) static inline void arch_reset(char mode) { - if (!cpu_is_omap24xx()) + if (!cpu_class_is_omap2()) omap1_arch_reset(mode); else omap_prcm_arch_reset(mode); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c new file mode 100644 index 000000000000..af326efc1ad3 --- /dev/null +++ b/arch/arm/plat-omap/io.c @@ -0,0 +1,107 @@ +#include <linux/module.h> +#include <linux/io.h> +#include <linux/mm.h> + +#include <mach/omap730.h> +#include <mach/omap1510.h> +#include <mach/omap16xx.h> +#include <mach/omap24xx.h> +#include <mach/omap34xx.h> + +#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) +{ +#ifdef CONFIG_ARCH_OMAP1 + if (cpu_class_is_omap1()) { + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + } + if (cpu_is_omap730()) { + if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) + return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + + if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) + return XLATE(p, OMAP730_DSPREG_BASE, + OMAP730_DSPREG_START); + } + if (cpu_is_omap15xx()) { + if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) + return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START); + + if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE)) + return XLATE(p, OMAP1510_DSPREG_BASE, + OMAP1510_DSPREG_START); + } + if (cpu_is_omap16xx()) { + if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE)) + return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START); + + if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE)) + return XLATE(p, OMAP16XX_DSPREG_BASE, + OMAP16XX_DSPREG_START); + } +#endif +#ifdef CONFIG_ARCH_OMAP2 + if (cpu_is_omap24xx()) { + if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE)) + return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT); + if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE)) + return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); + } + if (cpu_is_omap2420()) { + if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) + return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); + if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) + return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE); + if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) + return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); + } + if (cpu_is_omap2430()) { + if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) + return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT); + if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE)) + return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE)) + return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT); + if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE)) + return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT); + } +#endif +#ifdef CONFIG_ARCH_OMAP3 + if (cpu_is_omap34xx()) { + if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) + return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); + if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) + return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE)) + return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT); + if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE)) + return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT); + if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE)) + return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT); + if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE)) + return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT); + if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE)) + return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT); + if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE)) + return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); + } +#endif + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(omap_ioremap); + +void omap_iounmap(volatile void __iomem *addr) +{ + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); +} +EXPORT_SYMBOL(omap_iounmap); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 014d26574bb6..af33fc713e1a 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,43 +27,65 @@ #include <mach/dma.h> #include <mach/mcbsp.h> -static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; +struct omap_mcbsp **mcbsp_ptr; +int omap_mcbsp_count; -#define omap_mcbsp_check_valid_id(id) (mcbsp[id].pdata && \ - mcbsp[id].pdata->ops && \ - mcbsp[id].pdata->ops->check && \ - (mcbsp[id].pdata->ops->check(id) == 0)) +void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val) +{ + if (cpu_class_is_omap1() || cpu_is_omap2420()) + __raw_writew((u16)val, io_base + reg); + else + __raw_writel(val, io_base + reg); +} + +int omap_mcbsp_read(void __iomem *io_base, u16 reg) +{ + if (cpu_class_is_omap1() || cpu_is_omap2420()) + return __raw_readw(io_base + reg); + else + return __raw_readl(io_base + reg); +} + +#define OMAP_MCBSP_READ(base, reg) \ + omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg) +#define OMAP_MCBSP_WRITE(base, reg, val) \ + omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val) + +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; static void omap_mcbsp_dump_reg(u8 id) { - dev_dbg(mcbsp[id].dev, "**** McBSP%d regs ****\n", mcbsp[id].id); - dev_dbg(mcbsp[id].dev, "DRR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2)); - dev_dbg(mcbsp[id].dev, "DRR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1)); - dev_dbg(mcbsp[id].dev, "DXR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2)); - dev_dbg(mcbsp[id].dev, "DXR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1)); - dev_dbg(mcbsp[id].dev, "SPCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2)); - dev_dbg(mcbsp[id].dev, "SPCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1)); - dev_dbg(mcbsp[id].dev, "RCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2)); - dev_dbg(mcbsp[id].dev, "RCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1)); - dev_dbg(mcbsp[id].dev, "XCR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2)); - dev_dbg(mcbsp[id].dev, "XCR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1)); - dev_dbg(mcbsp[id].dev, "SRGR2: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2)); - dev_dbg(mcbsp[id].dev, "SRGR1: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1)); - dev_dbg(mcbsp[id].dev, "PCR0: 0x%04x\n", - OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0)); - dev_dbg(mcbsp[id].dev, "***********************\n"); + struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); + + dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); + dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DRR2)); + dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DRR1)); + dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DXR2)); + dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, DXR1)); + dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SPCR2)); + dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SPCR1)); + dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, RCR2)); + dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, RCR1)); + dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, XCR2)); + dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, XCR1)); + dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SRGR2)); + dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, SRGR1)); + dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", + OMAP_MCBSP_READ(mcbsp->io_base, PCR0)); + dev_dbg(mcbsp->dev, "***********************\n"); } static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) @@ -126,16 +148,18 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) */ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); - io_base = mcbsp[id].io_base; - dev_dbg(mcbsp[id].dev, "Configuring McBSP%d io_base: 0x%8x\n", - mcbsp[id].id, io_base); + io_base = mcbsp->io_base; + dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", + mcbsp->id, mcbsp->phys_base); /* We write the given config */ OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); @@ -158,23 +182,26 @@ EXPORT_SYMBOL(omap_mcbsp_config); */ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) { + struct omap_mcbsp *mcbsp; + if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - spin_lock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); - if (!mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return -EINVAL; } - mcbsp[id].io_type = io_type; + mcbsp->io_type = io_type; - spin_unlock(&mcbsp[id].lock); + spin_unlock(&mcbsp->lock); return 0; } @@ -182,53 +209,60 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { + struct omap_mcbsp *mcbsp; int err; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp[id].pdata->ops->request) - mcbsp[id].pdata->ops->request(id); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) + mcbsp->pdata->ops->request(id); - clk_enable(mcbsp[id].clk); + clk_enable(mcbsp->clk); - spin_lock(&mcbsp[id].lock); - if (!mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d is currently in use\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); + if (!mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d is currently in use\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return -1; } - mcbsp[id].free = 0; - spin_unlock(&mcbsp[id].lock); + mcbsp->free = 0; + spin_unlock(&mcbsp->lock); + + /* + * Make sure that transmitter, receiver and sample-rate generator are + * not running before activating IRQs. + */ + OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0); + OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0); - if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* We need to get IRQs here */ - err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *) (&mcbsp[id])); + init_completion(&mcbsp->tx_irq_completion); + err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp[id].dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp[id].tx_irq, - mcbsp[id].id); + dev_err(mcbsp->dev, "Unable to request TX IRQ %d " + "for McBSP%d\n", mcbsp->tx_irq, + mcbsp->id); return err; } - init_completion(&(mcbsp[id].tx_irq_completion)); - - err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *) (&mcbsp[id])); + init_completion(&mcbsp->rx_irq_completion); + err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp[id].dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp[id].rx_irq, - mcbsp[id].id); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + dev_err(mcbsp->dev, "Unable to request RX IRQ %d " + "for McBSP%d\n", mcbsp->rx_irq, + mcbsp->id); + free_irq(mcbsp->tx_irq, (void *)mcbsp); return err; } - - init_completion(&(mcbsp[id].rx_irq_completion)); } return 0; @@ -237,31 +271,34 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { + struct omap_mcbsp *mcbsp; + if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp[id].pdata->ops->free) - mcbsp[id].pdata->ops->free(id); + if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) + mcbsp->pdata->ops->free(id); - clk_disable(mcbsp[id].clk); + clk_disable(mcbsp->clk); - spin_lock(&mcbsp[id].lock); - if (mcbsp[id].free) { - dev_err(mcbsp[id].dev, "McBSP%d was not reserved\n", - mcbsp[id].id); - spin_unlock(&mcbsp[id].lock); + spin_lock(&mcbsp->lock); + if (mcbsp->free) { + dev_err(mcbsp->dev, "McBSP%d was not reserved\n", + mcbsp->id); + spin_unlock(&mcbsp->lock); return; } - mcbsp[id].free = 1; - spin_unlock(&mcbsp[id].lock); + mcbsp->free = 1; + spin_unlock(&mcbsp->lock); - if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* Free IRQs */ - free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); } } EXPORT_SYMBOL(omap_mcbsp_free); @@ -273,18 +310,19 @@ EXPORT_SYMBOL(omap_mcbsp_free); */ void omap_mcbsp_start(unsigned int id) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; u16 w; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; - io_base = mcbsp[id].io_base; - - mcbsp[id].rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; - mcbsp[id].tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; + mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; + mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; /* Start the sample generator */ w = OMAP_MCBSP_READ(io_base, SPCR2); @@ -310,7 +348,8 @@ EXPORT_SYMBOL(omap_mcbsp_start); void omap_mcbsp_stop(unsigned int id) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -318,7 +357,8 @@ void omap_mcbsp_stop(unsigned int id) return; } - io_base = mcbsp[id].io_base; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; /* Reset transmitter */ w = OMAP_MCBSP_READ(io_base, SPCR2); @@ -337,14 +377,17 @@ EXPORT_SYMBOL(omap_mcbsp_stop); /* polled mcbsp i/o operations */ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) { - u32 base; + struct omap_mcbsp *mcbsp; + void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } - base = mcbsp[id].io_base; + mcbsp = id_to_mcbsp_ptr(id); + base = mcbsp->io_base; + writew(buf, base + OMAP_MCBSP_REG_DXR1); /* if frame sync error - clear the error */ if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { @@ -366,8 +409,8 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) (XRST), base + OMAP_MCBSP_REG_SPCR2); udelay(10); - dev_err(mcbsp[id].dev, "Could not write to" - " McBSP%d Register\n", mcbsp[id].id); + dev_err(mcbsp->dev, "Could not write to" + " McBSP%d Register\n", mcbsp->id); return -2; } } @@ -379,14 +422,16 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite); int omap_mcbsp_pollread(unsigned int id, u16 *buf) { - u32 base; + struct omap_mcbsp *mcbsp; + void __iomem *base; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - base = mcbsp[id].io_base; + base = mcbsp->io_base; /* if frame sync error - clear the error */ if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { /* clear error */ @@ -407,8 +452,8 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) (RRST), base + OMAP_MCBSP_REG_SPCR1); udelay(10); - dev_err(mcbsp[id].dev, "Could not read from" - " McBSP%d Register\n", mcbsp[id].id); + dev_err(mcbsp->dev, "Could not read from" + " McBSP%d Register\n", mcbsp->id); return -2; } } @@ -424,7 +469,8 @@ EXPORT_SYMBOL(omap_mcbsp_pollread); */ void omap_mcbsp_xmit_word(unsigned int id, u32 word) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; omap_mcbsp_word_length word_length; if (!omap_mcbsp_check_valid_id(id)) { @@ -432,10 +478,11 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word) return; } - io_base = mcbsp[id].io_base; - word_length = mcbsp[id].tx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + word_length = mcbsp->tx_word_length; - wait_for_completion(&(mcbsp[id].tx_irq_completion)); + wait_for_completion(&mcbsp->tx_irq_completion); if (word_length > OMAP_MCBSP_WORD_16) OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); @@ -445,7 +492,8 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word); u32 omap_mcbsp_recv_word(unsigned int id) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; u16 word_lsb, word_msb = 0; omap_mcbsp_word_length word_length; @@ -453,11 +501,12 @@ u32 omap_mcbsp_recv_word(unsigned int id) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - word_length = mcbsp[id].rx_word_length; - io_base = mcbsp[id].io_base; + word_length = mcbsp->rx_word_length; + io_base = mcbsp->io_base; - wait_for_completion(&(mcbsp[id].rx_irq_completion)); + wait_for_completion(&mcbsp->rx_irq_completion); if (word_length > OMAP_MCBSP_WORD_16) word_msb = OMAP_MCBSP_READ(io_base, DRR2); @@ -469,7 +518,8 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word); int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) { - u32 io_base; + struct omap_mcbsp *mcbsp; + void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; @@ -478,10 +528,10 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } - - io_base = mcbsp[id].io_base; - tx_word_length = mcbsp[id].tx_word_length; - rx_word_length = mcbsp[id].rx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + tx_word_length = mcbsp->tx_word_length; + rx_word_length = mcbsp->rx_word_length; if (tx_word_length != rx_word_length) return -EINVAL; @@ -496,8 +546,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d transmitter not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d transmitter not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -517,8 +567,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d receiver not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d receiver not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -534,7 +584,9 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) { - u32 io_base, clock_word = 0; + struct omap_mcbsp *mcbsp; + u32 clock_word = 0; + void __iomem *io_base; omap_mcbsp_word_length tx_word_length; omap_mcbsp_word_length rx_word_length; u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; @@ -544,9 +596,11 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) return -ENODEV; } - io_base = mcbsp[id].io_base; - tx_word_length = mcbsp[id].tx_word_length; - rx_word_length = mcbsp[id].rx_word_length; + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + tx_word_length = mcbsp->tx_word_length; + rx_word_length = mcbsp->rx_word_length; if (tx_word_length != rx_word_length) return -EINVAL; @@ -561,8 +615,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d transmitter not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d transmitter not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -582,8 +636,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) udelay(10); OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); udelay(10); - dev_err(mcbsp[id].dev, "McBSP%d receiver not " - "ready\n", mcbsp[id].id); + dev_err(mcbsp->dev, "McBSP%d receiver not " + "ready\n", mcbsp->id); return -EAGAIN; } } @@ -609,6 +663,7 @@ EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { + struct omap_mcbsp *mcbsp; int dma_tx_ch; int src_port = 0; int dest_port = 0; @@ -618,50 +673,51 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", + if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback, - &mcbsp[id], + mcbsp, &dma_tx_ch)) { - dev_err(mcbsp[id].dev, " Unable to request DMA channel for " + dev_err(mcbsp->dev, " Unable to request DMA channel for " "McBSP%d TX. Trying IRQ based TX\n", - mcbsp[id].id); + mcbsp->id); return -EAGAIN; } - mcbsp[id].dma_tx_lch = dma_tx_ch; + mcbsp->dma_tx_lch = dma_tx_ch; - dev_err(mcbsp[id].dev, "McBSP%d TX DMA on channel %d\n", mcbsp[id].id, + dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id, dma_tx_ch); - init_completion(&(mcbsp[id].tx_dma_completion)); + init_completion(&mcbsp->tx_dma_completion); if (cpu_class_is_omap1()) { src_port = OMAP_DMA_PORT_TIPB; dest_port = OMAP_DMA_PORT_EMIFF; } if (cpu_class_is_omap2()) - sync_dev = mcbsp[id].dma_tx_sync; + sync_dev = mcbsp->dma_tx_sync; - omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, + omap_set_dma_transfer_params(mcbsp->dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, sync_dev, 0); - omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, + omap_set_dma_dest_params(mcbsp->dma_tx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1, + mcbsp->phys_base + OMAP_MCBSP_REG_DXR1, 0, 0); - omap_set_dma_src_params(mcbsp[id].dma_tx_lch, + omap_set_dma_src_params(mcbsp->dma_tx_lch, dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); - omap_start_dma(mcbsp[id].dma_tx_lch); - wait_for_completion(&(mcbsp[id].tx_dma_completion)); + omap_start_dma(mcbsp->dma_tx_lch); + wait_for_completion(&mcbsp->tx_dma_completion); return 0; } @@ -670,6 +726,7 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { + struct omap_mcbsp *mcbsp; int dma_rx_ch; int src_port = 0; int dest_port = 0; @@ -679,50 +736,51 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return -ENODEV; } + mcbsp = id_to_mcbsp_ptr(id); - if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", + if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback, - &mcbsp[id], + mcbsp, &dma_rx_ch)) { - dev_err(mcbsp[id].dev, "Unable to request DMA channel for " + dev_err(mcbsp->dev, "Unable to request DMA channel for " "McBSP%d RX. Trying IRQ based RX\n", - mcbsp[id].id); + mcbsp->id); return -EAGAIN; } - mcbsp[id].dma_rx_lch = dma_rx_ch; + mcbsp->dma_rx_lch = dma_rx_ch; - dev_err(mcbsp[id].dev, "McBSP%d RX DMA on channel %d\n", mcbsp[id].id, + dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id, dma_rx_ch); - init_completion(&(mcbsp[id].rx_dma_completion)); + init_completion(&mcbsp->rx_dma_completion); if (cpu_class_is_omap1()) { src_port = OMAP_DMA_PORT_TIPB; dest_port = OMAP_DMA_PORT_EMIFF; } if (cpu_class_is_omap2()) - sync_dev = mcbsp[id].dma_rx_sync; + sync_dev = mcbsp->dma_rx_sync; - omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, + omap_set_dma_transfer_params(mcbsp->dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, sync_dev, 0); - omap_set_dma_src_params(mcbsp[id].dma_rx_lch, + omap_set_dma_src_params(mcbsp->dma_rx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1, + mcbsp->phys_base + OMAP_MCBSP_REG_DRR1, 0, 0); - omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, + omap_set_dma_dest_params(mcbsp->dma_rx_lch, dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); - omap_start_dma(mcbsp[id].dma_rx_lch); - wait_for_completion(&(mcbsp[id].rx_dma_completion)); + omap_start_dma(mcbsp->dma_rx_lch); + wait_for_completion(&mcbsp->rx_dma_completion); return 0; } @@ -737,12 +795,14 @@ EXPORT_SYMBOL(omap_mcbsp_recv_buffer); void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *spi_cfg) { + struct omap_mcbsp *mcbsp; struct omap_mcbsp_reg_cfg mcbsp_cfg; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } + mcbsp = id_to_mcbsp_ptr(id); memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); @@ -803,9 +863,10 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. * 730 has only 2 McBSP, and both of them are MPU peripherals. */ -static int __init omap_mcbsp_probe(struct platform_device *pdev) +static int __devinit omap_mcbsp_probe(struct platform_device *pdev) { struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; + struct omap_mcbsp *mcbsp; int id = pdev->id - 1; int ret = 0; @@ -818,47 +879,63 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); - if (id >= OMAP_MAX_MCBSP_COUNT) { + if (id >= omap_mcbsp_count) { dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); ret = -EINVAL; goto exit; } - spin_lock_init(&mcbsp[id].lock); - mcbsp[id].id = id + 1; - mcbsp[id].free = 1; - mcbsp[id].dma_tx_lch = -1; - mcbsp[id].dma_rx_lch = -1; + mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); + if (!mcbsp) { + ret = -ENOMEM; + goto exit; + } + mcbsp_ptr[id] = mcbsp; + + spin_lock_init(&mcbsp->lock); + mcbsp->id = id + 1; + mcbsp->free = 1; + mcbsp->dma_tx_lch = -1; + mcbsp->dma_rx_lch = -1; + + mcbsp->phys_base = pdata->phys_base; + mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K); + if (!mcbsp->io_base) { + ret = -ENOMEM; + goto err_ioremap; + } - mcbsp[id].phys_base = pdata->phys_base; - mcbsp[id].io_base = pdata->virt_base; /* Default I/O is IRQ based */ - mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO; - mcbsp[id].tx_irq = pdata->tx_irq; - mcbsp[id].rx_irq = pdata->rx_irq; - mcbsp[id].dma_rx_sync = pdata->dma_rx_sync; - mcbsp[id].dma_tx_sync = pdata->dma_tx_sync; + mcbsp->io_type = OMAP_MCBSP_IRQ_IO; + mcbsp->tx_irq = pdata->tx_irq; + mcbsp->rx_irq = pdata->rx_irq; + mcbsp->dma_rx_sync = pdata->dma_rx_sync; + mcbsp->dma_tx_sync = pdata->dma_tx_sync; if (pdata->clk_name) - mcbsp[id].clk = clk_get(&pdev->dev, pdata->clk_name); - if (IS_ERR(mcbsp[id].clk)) { - mcbsp[id].free = 0; + mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(mcbsp->clk)) { dev_err(&pdev->dev, "Invalid clock configuration for McBSP%d.\n", - mcbsp[id].id); - ret = -EINVAL; - goto exit; + mcbsp->id); + ret = PTR_ERR(mcbsp->clk); + goto err_clk; } - mcbsp[id].pdata = pdata; - mcbsp[id].dev = &pdev->dev; - platform_set_drvdata(pdev, &mcbsp[id]); + mcbsp->pdata = pdata; + mcbsp->dev = &pdev->dev; + platform_set_drvdata(pdev, mcbsp); + return 0; +err_clk: + iounmap(mcbsp->io_base); +err_ioremap: + mcbsp->free = 0; exit: return ret; } -static int omap_mcbsp_remove(struct platform_device *pdev) +static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); @@ -872,6 +949,8 @@ static int omap_mcbsp_remove(struct platform_device *pdev) clk_disable(mcbsp->clk); clk_put(mcbsp->clk); + iounmap(mcbsp->io_base); + mcbsp->clk = NULL; mcbsp->free = 0; mcbsp->dev = NULL; @@ -882,7 +961,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev) static struct platform_driver omap_mcbsp_driver = { .probe = omap_mcbsp_probe, - .remove = omap_mcbsp_remove, + .remove = __devexit_p(omap_mcbsp_remove), .driver = { .name = "omap-mcbsp", }, diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e0003e0746e7..9f9a921829c0 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -271,7 +271,7 @@ int __init omap1_sram_init(void) #define omap1_sram_init() do {} while (0) #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level); -u32 omap2_sram_reprogram_gpmc(u32 perf_level) -{ - if (!_omap2_sram_reprogram_gpmc) - omap_sram_error(); - - return _omap2_sram_reprogram_gpmc(perf_level); -} - -static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n, - u32 freqsel, u32 m2); -u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2) +static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, + u32 m2); +u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2) { - if (!_omap2_sram_configure_core_dpll) + if (!_omap3_sram_configure_core_dpll) omap_sram_error(); - return _omap2_sram_configure_core_dpll(m, n, freqsel, m2); + return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, + sdrc_actim_ctrla, + sdrc_actim_ctrlb, m2); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ @@ -376,31 +372,16 @@ void restore_sram_functions(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); } int __init omap34xx_sram_init(void) { - _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init, - omap34xx_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc, - omap34xx_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm, - omap34xx_sram_set_prcm_sz); - - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); return 0; } |