aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/mips/Kconfig72
-rw-r--r--arch/mips/kernel/Makefile4
-rw-r--r--arch/mips/kernel/genex.S32
-rw-r--r--arch/mips/kernel/irq-msc01.c8
-rw-r--r--arch/mips/kernel/rtlx.c341
-rw-r--r--arch/mips/kernel/traps.c227
-rw-r--r--arch/mips/kernel/vpe.c1295
-rw-r--r--arch/mips/mips-boards/generic/init.c29
-rw-r--r--arch/mips/mips-boards/generic/memory.c29
-rw-r--r--arch/mips/mips-boards/generic/mipsIRQ.S110
-rw-r--r--arch/mips/mips-boards/generic/time.c49
-rw-r--r--arch/mips/mips-boards/malta/malta_int.c136
-rw-r--r--arch/mips/mm/c-r4k.c3
-rw-r--r--arch/mips/mm/c-sb1.c5
14 files changed, 2208 insertions, 132 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 749fa871e8e7..4ef015f580f9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,6 +13,22 @@ mainmenu "Linux/MIPS Kernel Configuration"
source "init/Kconfig"
+config CPU_MIPS32
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+
+config CPU_MIPS64
+ bool
+ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+
+config CPU_MIPSR1
+ bool
+ default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
+
+config CPU_MIPSR2
+ bool
+ default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+
config SYS_SUPPORTS_32BIT_KERNEL
bool
config SYS_SUPPORTS_64BIT_KERNEL
@@ -233,6 +249,7 @@ config MIPS_EV64120
bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
+ select IRQ_CPU
select HW_HAS_PCI
select MIPS_GT64120
select SYS_SUPPORTS_32BIT_KERNEL
@@ -344,6 +361,7 @@ config MIPS_MALTA
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
+ select IRQ_CPU
select GENERIC_ISA_DMA
select HW_HAS_PCI
select I8259
@@ -1277,6 +1295,31 @@ config CPU_HAS_PREFETCH
bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
+config MIPS_MT
+ bool "Enable MIPS MT"
+
+config MIPS_VPE_LOADER
+ bool "VPE loader support."
+ depends on MIPS_MT
+ help
+ Includes a loader for loading an elf relocatable object
+ onto another VPE and running it.
+
+config MIPS_VPE_LOADER_TOM
+ bool "Load VPE program into memory hidden from linux"
+ depends on MIPS_VPE_LOADER
+ default y
+ help
+ The loader can use memory that is present but has been hidden from
+ Linux using the kernel command line option "mem=xxMB". It's up to
+ you to ensure the amount you put in the option and the space your
+ program requires is less or equal to the amount physically present.
+
+# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
+config MIPS_VPE_APSP_API
+ bool "Enable support for AP/SP API (RTLX)"
+ depends on MIPS_VPE_LOADER
+
config VTAG_ICACHE
bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
default y if CPU_SB1
@@ -1335,6 +1378,35 @@ config CPU_HAS_WB
machines which require flushing of write buffers in software. Saying
Y is the safe option; N may result in kernel malfunction and crashes.
+menu "MIPSR2 Interrupt handling"
+ depends on CPU_MIPSR2 && CPU_ADVANCED
+
+config CPU_MIPSR2_IRQ_VI
+ bool "Vectored interrupt mode"
+ help
+ Vectored interrupt mode allowing faster dispatching of interrupts.
+ The board support code needs to be written to take advantage of this
+ mode. Compatibility code is included to allow the kernel to run on
+ a CPU that does not support vectored interrupts. It's safe to
+ say Y here.
+
+config CPU_MIPSR2_IRQ_EI
+ bool "External interrupt controller mode"
+ help
+ Extended interrupt mode takes advantage of an external interrupt
+ controller to allow fast dispatching from many possible interrupt
+ sources. Say N unless you know that external interrupt support is
+ required.
+
+config CPU_MIPSR2_SRS
+ bool "Make shadow set registers available for interrupt handlers"
+ depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
+ help
+ Allow the kernel to use shadow register sets for fast interrupts.
+ Interrupt handlers must be specially written to use shadow sets.
+ Say N unless you know that shadow register set upport is needed.
+endmenu
+
config CPU_HAS_SYNC
bool
depends on !CPU_R3000
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0867417032f2..0f527063a8a8 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -34,12 +34,16 @@ obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
+obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+
obj-$(CONFIG_NO_ISA) += dma-no-isa.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o
obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o
+obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o
obj-$(CONFIG_32BIT) += scall32-o32.o
obj-$(CONFIG_64BIT) += scall64-64.o
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 349ec301168f..fd904d1e4190 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -148,6 +148,38 @@ NESTED(except_vec_ejtag_debug, 0, sp)
__FINIT
/*
+ * Vectored interrupt handler.
+ * This prototype is copied to ebase + n*IntCtl.VS and patched
+ * to invoke the handler
+ */
+NESTED(except_vec_vi, 0, sp)
+ SAVE_SOME
+ SAVE_AT
+ .set push
+ .set noreorder
+EXPORT(except_vec_vi_lui)
+ lui v0, 0 /* Patched */
+ j except_vec_vi_handler
+EXPORT(except_vec_vi_ori)
+ ori v0, 0 /* Patched */
+ .set pop
+ END(except_vec_vi)
+EXPORT(except_vec_vi_end)
+
+/*
+ * Common Vectored Interrupt code
+ * Complete the register saves and invoke the handler which is passed in $v0
+ */
+NESTED(except_vec_vi_handler, 0, sp)
+ SAVE_TEMP
+ SAVE_STATIC
+ CLI
+ move a0, sp
+ jalr v0
+ j ret_from_irq
+ END(except_vec_vi_handler)
+
+/*
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index bf759e33c5ef..3f653c7cfbf3 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -74,7 +74,7 @@ static void disable_msc_irq(unsigned int irq)
static void level_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
- if (!cpu_has_ei)
+ if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
}
@@ -84,7 +84,7 @@ static void level_mask_and_ack_msc_irq(unsigned int irq)
static void edge_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
- if (!cpu_has_ei)
+ if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
else {
u32 r;
@@ -166,14 +166,14 @@ void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq)
switch (imp->im_type) {
case MSC01_IRQ_EDGE:
irq_desc[base+n].handler = &msc_edgeirq_type;
- if (cpu_has_ei)
+ if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
break;
case MSC01_IRQ_LEVEL:
irq_desc[base+n].handler = &msc_levelirq_type;
- if (cpu_has_ei)
+ if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
new file mode 100644
index 000000000000..8c81f3cb4e2d
--- /dev/null
+++ b/arch/mips/kernel/rtlx.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <asm/mipsmtregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/rtlx.h>
+
+#define RTLX_MAJOR 64
+#define RTLX_TARG_VPE 1
+
+struct rtlx_info *rtlx;
+static int major;
+static char module_name[] = "rtlx";
+static inline int spacefree(int read, int write, int size);
+
+static struct chan_waitqueues {
+ wait_queue_head_t rt_queue;
+ wait_queue_head_t lx_queue;
+} channel_wqs[RTLX_CHANNELS];
+
+static struct irqaction irq;
+static int irq_num;
+
+extern void *vpe_get_shared(int index);
+
+static void rtlx_dispatch(struct pt_regs *regs)
+{
+ do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs);
+}
+
+irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ irqreturn_t r = IRQ_HANDLED;
+ int i;
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ struct rtlx_channel *chan = &rtlx->channel[i];
+
+ if (chan->lx_read != chan->lx_write)
+ wake_up_interruptible(&channel_wqs[i].lx_queue);
+ }
+
+ return r;
+}
+
+void dump_rtlx(void)
+{
+ int i;
+
+ printk("id 0x%lx state %d\n", rtlx->id, rtlx->state);
+
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ struct rtlx_channel *chan = &rtlx->channel[i];
+
+ printk(" rt_state %d lx_state %d buffer_size %d\n",
+ chan->rt_state, chan->lx_state, chan->buffer_size);
+
+ printk(" rt_read %d rt_write %d\n",
+ chan->rt_read, chan->rt_write);
+
+ printk(" lx_read %d lx_write %d\n",
+ chan->lx_read, chan->lx_write);
+
+ printk(" rt_buffer <%s>\n", chan->rt_buffer);
+ printk(" lx_buffer <%s>\n", chan->lx_buffer);
+ }
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+ int i;
+
+ if (rtlxi->id != RTLX_ID) {
+ printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi);
+ return (-ENOEXEC);
+ }
+
+ /* initialise the wait queues */
+ for (i = 0; i < RTLX_CHANNELS; i++) {
+ init_waitqueue_head(&channel_wqs[i].rt_queue);
+ init_waitqueue_head(&channel_wqs[i].lx_queue);
+ }
+
+ /* set up for interrupt handling */
+ memset(&irq, 0, sizeof(struct irqaction));
+
+ if (cpu_has_vint) {
+ set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ }
+
+ irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+ irq.handler = rtlx_interrupt;
+ irq.flags = SA_INTERRUPT;
+ irq.name = "RTLX";
+ irq.dev_id = rtlx;
+ setup_irq(irq_num, &irq);
+
+ rtlx = rtlxi;
+ return (0);
+}
+
+/* only allow one open process at a time to open each channel */
+static int rtlx_open(struct inode *inode, struct file *filp)
+{
+ int minor, ret;
+ struct rtlx_channel *chan;
+
+ /* assume only 1 device at the mo. */
+ minor = MINOR(inode->i_rdev);
+
+ if (rtlx == NULL) {
+ struct rtlx_info **p;
+ if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+ printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n");
+ return (-EFAULT);
+ }
+
+ if (*p == NULL) {
+ printk(" vpe_shared %p %p\n", p, *p);
+ return (-EFAULT);
+ }
+
+ if ((ret = rtlx_init(*p)) < 0)
+ return (ret);
+ }
+
+ chan = &rtlx->channel[minor];
+
+ /* already open? */
+ if (chan->lx_state == RTLX_STATE_OPENED)
+ return (-EBUSY);
+
+ chan->lx_state = RTLX_STATE_OPENED;
+ return (0);
+}
+
+static int rtlx_release(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED;
+ return (0);
+}
+
+static unsigned int rtlx_poll(struct file *file, poll_table * wait)
+{
+ int minor;
+ unsigned int mask = 0;
+ struct rtlx_channel *chan;
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ chan = &rtlx->channel[minor];
+
+ poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+ poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+ /* data available to read? */
+ if (chan->lx_read != chan->lx_write)
+ mask |= POLLIN | POLLRDNORM;
+
+ /* space to write */
+ if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size))
+ mask |= POLLOUT | POLLWRNORM;
+
+ return (mask);
+}
+
+static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count,
+ loff_t * ppos)
+{
+ size_t fl = 0L;
+ int minor;
+ struct rtlx_channel *lx;
+ DECLARE_WAITQUEUE(wait, current);
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ lx = &rtlx->channel[minor];
+
+ /* data available? */
+ if (lx->lx_write == lx->lx_read) {
+ if (file->f_flags & O_NONBLOCK)
+ return (0); // -EAGAIN makes cat whinge
+
+ /* go to sleep */
+ add_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (lx->lx_write == lx->lx_read)
+ schedule();
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+
+ /* back running */
+ }
+
+ /* find out how much in total */
+ count = min( count,
+ (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size);
+
+ /* then how much from the read pointer onwards */
+ fl = min( count, (size_t)lx->buffer_size - lx->lx_read);
+
+ copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl);
+
+ /* and if there is anything left at the beginning of the buffer */
+ if ( count - fl )
+ copy_to_user (buffer + fl, lx->lx_buffer, count - fl);
+
+ /* update the index */
+ lx->lx_read += count;
+ lx->lx_read %= lx->buffer_size;
+
+ return (count);
+}
+
+static inline int spacefree(int read, int write, int size)
+{
+ if (read == write) {
+ /* never fill the buffer completely, so indexes are always equal if empty
+ and only empty, or !equal if data available */
+ return (size - 1);
+ }
+
+ return ((read + size - write) % size) - 1;
+}
+
+static ssize_t rtlx_write(struct file *file, const char __user * buffer,
+ size_t count, loff_t * ppos)
+{
+ int minor;
+ struct rtlx_channel *rt;
+ size_t fl;
+ DECLARE_WAITQUEUE(wait, current);
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ rt = &rtlx->channel[minor];
+
+ /* any space left... */
+ if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) {
+
+ if (file->f_flags & O_NONBLOCK)
+ return (-EAGAIN);
+
+ add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size))
+ schedule();
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+ }
+
+ /* total number of bytes to copy */
+ count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) );
+
+ /* first bit from write pointer to the end of the buffer, or count */
+ fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+ copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl);
+
+ /* if there's any left copy to the beginning of the buffer */
+ if( count - fl )
+ copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+
+ rt->rt_write += count;
+ rt->rt_write %= rt->buffer_size;
+
+ return(count);
+}
+
+static struct file_operations rtlx_fops = {
+ .owner = THIS_MODULE,
+ .open = rtlx_open,
+ .release = rtlx_release,
+ .write = rtlx_write,
+ .read = rtlx_read,
+ .poll = rtlx_poll
+};
+
+static int rtlx_module_init(void)
+{
+ if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) {
+ printk("rtlx_module_init: unable to register device\n");
+ return (-EBUSY);
+ }
+
+ if (major == 0)
+ major = RTLX_MAJOR;
+
+ return (0);
+}
+
+static void rtlx_module_exit(void)
+{
+ unregister_chrdev(major, module_name);
+}
+
+module_init(rtlx_module_init);
+module_exit(rtlx_module_exit);
+MODULE_DESCRIPTION("MIPS RTLX");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b2fa607eeeb8..0a3969aa8dc6 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -20,6 +20,7 @@
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
+#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
@@ -64,6 +65,9 @@ extern int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp,
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
/*
* These constant is for searching for possible module text segments.
@@ -813,6 +817,12 @@ asmlinkage void do_reserved(struct pt_regs *regs)
(regs->cp0_cause & 0x7f) >> 2);
}
+asmlinkage void do_default_vi(struct pt_regs *regs)
+{
+ show_regs(regs);
+ panic("Caught unexpected vectored interrupt.");
+}
+
/*
* Some MIPS CPUs can enable/disable for cache parity detection, but do
* it different ways.
@@ -921,7 +931,11 @@ void nmi_exception_handler(struct pt_regs *regs)
while(1) ;
}
+#define VECTORSPACING 0x100 /* for EI/VI mode */
+
+unsigned long ebase;
unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
/*
* As a side effect of the way this is implemented we're limited
@@ -935,13 +949,156 @@ void *set_except_vector(int n, void *addr)
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
- *(volatile u32 *)(CAC_BASE + 0x200) = 0x08000000 |
+ *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(CAC_BASE + 0x200, CAC_BASE + 0x204);
+ flush_icache_range(ebase + 0x200, ebase + 0x204);
+ }
+ return (void *)old_handler;
+}
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Shadow register allocation
+ * FIXME: SMP...
+ */
+
+/* MIPSR2 shadow register sets */
+struct shadow_registers {
+ spinlock_t sr_lock; /* */
+ int sr_supported; /* Number of shadow register sets supported */
+ int sr_allocated; /* Bitmap of allocated shadow registers */
+} shadow_registers;
+
+void mips_srs_init(void)
+{
+#ifdef CONFIG_CPU_MIPSR2_SRS
+ shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+ printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported);
+#else
+ shadow_registers.sr_supported = 1;
+#endif
+ shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */
+ spin_lock_init(&shadow_registers.sr_lock);
+}
+
+int mips_srs_max(void)
+{
+ return shadow_registers.sr_supported;
+}
+
+int mips_srs_alloc (void)
+{
+ struct shadow_registers *sr = &shadow_registers;
+ unsigned long flags;
+ int set;
+
+ spin_lock_irqsave(&sr->sr_lock, flags);
+
+ for (set = 0; set < sr->sr_supported; set++) {
+ if ((sr->sr_allocated & (1 << set)) == 0) {
+ sr->sr_allocated |= 1 << set;
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+ return set;
+ }
+ }
+
+ /* None available */
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+ return -1;
+}
+
+void mips_srs_free (int set)
+{
+ struct shadow_registers *sr = &shadow_registers;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sr->sr_lock, flags);
+ sr->sr_allocated &= ~(1 << set);
+ spin_unlock_irqrestore(&sr->sr_lock, flags);
+}
+
+void *set_vi_srs_handler (int n, void *addr, int srs)
+{
+ unsigned long handler;
+ unsigned long old_handler = vi_handlers[n];
+ u32 *w;
+ unsigned char *b;
+
+ if (!cpu_has_veic && !cpu_has_vint)
+ BUG();
+
+ if (addr == NULL) {
+ handler = (unsigned long) do_default_vi;
+ srs = 0;
+ }
+ else
+ handler = (unsigned long) addr;
+ vi_handlers[n] = (unsigned long) addr;
+
+ b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+ if (srs >= mips_srs_max())
+ panic("Shadow register set %d not supported", srs);
+
+ if (cpu_has_veic) {
+ if (board_bind_eic_interrupt)
+ board_bind_eic_interrupt (n, srs);
+ }
+ else if (cpu_has_vint) {
+ /* SRSMap is only defined if shadow sets are implemented */
+ if (mips_srs_max() > 1)
+ change_c0_srsmap (0xf << n*4, srs << n*4);
+ }
+
+ if (srs == 0) {
+ /*
+ * If no shadow set is selected then use the default handler
+ * that does normal register saving and a standard interrupt exit
+ */
+
+ extern char except_vec_vi, except_vec_vi_lui;
+ extern char except_vec_vi_ori, except_vec_vi_end;
+ const int handler_len = &except_vec_vi_end - &except_vec_vi;
+ const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
+ const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+
+ if (handler_len > VECTORSPACING) {
+ /*
+ * Sigh... panicing won't help as the console
+ * is probably not configured :(
+ */
+ panic ("VECTORSPACING too small");
+ }
+
+ memcpy (b, &except_vec_vi, handler_len);
+ w = (u32 *)(b + lui_offset);
+ *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
+ w = (u32 *)(b + ori_offset);
+ *w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
+ flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+ }
+ else {
+ /*
+ * In other cases jump directly to the interrupt handler
+ *
+ * It is the handlers responsibility to save registers if required
+ * (eg hi/lo) and return from the exception using "eret"
+ */
+ w = (u32 *)b;
+ *w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
+ *w = 0;
+ flush_icache_range((unsigned long)b, (unsigned long)(b+8));
}
+
return (void *)old_handler;
}
+void *set_vi_handler (int n, void *addr)
+{
+ return set_vi_srs_handler (n, addr, 0);
+}
+#endif
+
/*
* This is used by native signal handling
*/
@@ -1016,10 +1173,18 @@ void __init per_cpu_trap_init(void)
if (cpu_has_dsp)
set_c0_status(ST0_MX);
+#ifdef CONFIG_CPU_MIPSR2
+ write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
+#endif
+
/*
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
+ * Interrupt handling.
*/
+ if (cpu_has_veic || cpu_has_vint) {
+ write_c0_ebase (ebase);
+ /* Setting vector spacing enables EI/VI mode */
+ change_c0_intctl (0x3e0, VECTORSPACING);
+ }
if (cpu_has_divec)
set_c0_cause(CAUSEF_IV);
@@ -1035,13 +1200,41 @@ void __init per_cpu_trap_init(void)
tlb_init();
}
+/* Install CPU exception handler */
+void __init set_handler (unsigned long offset, void *addr, unsigned long size)
+{
+ memcpy((void *)(ebase + offset), addr, size);
+ flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+/* Install uncached CPU exception handler */
+void __init set_uncached_handler (unsigned long offset, void *addr, unsigned long size)
+{
+#ifdef CONFIG_32BIT
+ unsigned long uncached_ebase = KSEG1ADDR(ebase);
+#endif
+#ifdef CONFIG_64BIT
+ unsigned long uncached_ebase = TO_UNCAC(ebase);
+#endif
+
+ memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
void __init trap_init(void)
{
extern char except_vec3_generic, except_vec3_r4000;
- extern char except_vec_ejtag_debug;
extern char except_vec4;
unsigned long i;
+ if (cpu_has_veic || cpu_has_vint)
+ ebase = (unsigned long) alloc_bootmem_low_pages (0x200 + VECTORSPACING*64);
+ else
+ ebase = CAC_BASE;
+
+#ifdef CONFIG_CPU_MIPSR2
+ mips_srs_init();
+#endif
+
per_cpu_trap_init();
/*
@@ -1049,7 +1242,7 @@ void __init trap_init(void)
* This will be overriden later as suitable for a particular
* configuration.
*/
- memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80);
+ set_handler(0x180, &except_vec3_generic, 0x80);
/*
* Setup default vectors
@@ -1061,8 +1254,8 @@ void __init trap_init(void)
* Copy the EJTAG debug exception vector handler code to it's final
* destination.
*/
- if (cpu_has_ejtag)
- memcpy((void *)(CAC_BASE + 0x300), &except_vec_ejtag_debug, 0x80);
+ if (cpu_has_ejtag && board_ejtag_handler_setup)
+ board_ejtag_handler_setup ();
/*
* Only some CPUs have the watch exceptions.
@@ -1071,11 +1264,15 @@ void __init trap_init(void)
set_except_vector(23, handle_watch);
/*
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
+ * Initialise interrupt handlers
*/
- if (cpu_has_divec)
- memcpy((void *)(CAC_BASE + 0x200), &except_vec4, 0x8);
+ if (cpu_has_veic || cpu_has_vint) {
+ int nvec = cpu_has_veic ? 64 : 8;
+ for (i = 0; i < nvec; i++)
+ set_vi_handler (i, NULL);
+ }
+ else if (cpu_has_divec)
+ set_handler(0x200, &except_vec4, 0x8);
/*
* Some CPUs can enable/disable for cache parity detection, but does
@@ -1122,6 +1319,10 @@ void __init trap_init(void)
//set_except_vector(15, handle_ndc);
}
+
+ if (board_nmi_handler_setup)
+ board_nmi_handler_setup();
+
if (cpu_has_fpu && !cpu_has_nofpuex)
set_except_vector(15, handle_fpe);
@@ -1146,5 +1347,5 @@ void __init trap_init(void)
signal32_init();
#endif
- flush_icache_range(CAC_BASE, CAC_BASE + 0x400);
+ flush_icache_range(ebase, ebase + 0x400);
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
new file mode 100644
index 000000000000..6bf42ba08f09
--- /dev/null
+++ b/arch/mips/kernel/vpe.c
@@ -0,0 +1,1295 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * VPE support module
+ *
+ * Provides support for loading a MIPS SP program on VPE1.
+ * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
+ * (or partially linked). You should initialise your stack in the startup
+ * code. This loader looks for the symbol __start and sets up
+ * execution to resume from there. The MIPS SDE kit contains suitable examples.
+ *
+ * To load and run, simply cat a SP 'program file' to /dev/vpe1.
+ * i.e cat spapp >/dev/vpe1.
+ *
+ * You'll need to have the following device files.
+ * mknod /dev/vpe0 c 63 0
+ * mknod /dev/vpe1 c 63 1
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/bootmem.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+
+typedef void *vpe_handle;
+
+// defined here because the kernel module loader doesn't have
+// anything to do with it.
+#define SHN_MIPS_SCOMMON 0xff03
+
+#ifndef ARCH_SHF_SMALL
+#define ARCH_SHF_SMALL 0
+#endif
+
+/* If this is set, the section belongs in the init part of the module */
+#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
+
+// temp number,
+#define VPE_MAJOR 63
+
+static char module_name[] = "vpe";
+static int major = 0;
+
+/* grab the likely amount of memory we will need. */
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+#define P_SIZE (2 * 1024 * 1024)
+#else
+/* add an overhead to the max kmalloc size for non-striped symbols/etc */
+#define P_SIZE (256 * 1024)
+#endif
+
+#define MAX_VPES 16
+
+enum vpe_state {
+ VPE_STATE_UNUSED = 0,
+ VPE_STATE_INUSE,
+ VPE_STATE_RUNNING
+};
+
+enum tc_state {
+ TC_STATE_UNUSED = 0,
+ TC_STATE_INUSE,
+ TC_STATE_RUNNING,
+ TC_STATE_DYNAMIC
+};
+
+struct vpe;
+typedef struct tc {
+ enum tc_state state;
+ int index;
+
+ /* parent VPE */
+ struct vpe *pvpe;
+
+ /* The list of TC's with this VPE */
+ struct list_head tc;
+
+ /* The global list of tc's */
+ struct list_head list;
+} tc_t;
+
+typedef struct vpe {
+ enum vpe_state state;
+
+ /* (device) minor associated with this vpe */
+ int minor;
+
+ /* elfloader stuff */
+ void *load_addr;
+ u32 len;
+ char *pbuffer;
+ u32 plen;
+
+ unsigned long __start;
+
+ /* tc's associated with this vpe */
+ struct list_head tc;
+
+ /* The list of vpe's */
+ struct list_head list;
+
+ /* shared symbol address */
+ void *shared_ptr;
+} vpe_t;
+
+struct vpecontrol_ {
+ /* Virtual processing elements */
+ struct list_head vpe_list;
+
+ /* Thread contexts */
+ struct list_head tc_list;
+} vpecontrol;
+
+static void release_progmem(void *ptr);
+static void dump_vpe(vpe_t * v);
+extern void save_gp_address(unsigned int secbase, unsigned int rel);
+
+/* get the vpe associated with this minor */
+struct vpe *get_vpe(int minor)
+{
+ struct vpe *v;
+
+ list_for_each_entry(v, &vpecontrol.vpe_list, list) {
+ if (v->minor == minor)
+ return v;
+ }
+
+ printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
+ return NULL;
+}
+
+/* get the vpe associated with this minor */
+struct tc *get_tc(int index)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ if (t->index == index)
+ return t;
+ }
+
+ printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
+
+ return NULL;
+}
+
+struct tc *get_tc_unused(void)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ if (t->state == TC_STATE_UNUSED)
+ return t;
+ }
+
+ printk(KERN_DEBUG "VPE: All TC's are in use\n");
+
+ return NULL;
+}
+
+/* allocate a vpe and associate it with this minor (or index) */
+struct vpe *alloc_vpe(int minor)
+{
+ struct vpe *v;
+
+ if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
+ return NULL;
+ }
+
+ memset(v, 0, sizeof(struct vpe));
+
+ INIT_LIST_HEAD(&v->tc);
+ list_add_tail(&v->list, &vpecontrol.vpe_list);
+
+ v->minor = minor;
+ return v;
+}
+
+/* allocate a tc. At startup only tc0 is running, all other can be halted. */
+struct tc *alloc_tc(int index)
+{
+ struct tc *t;
+
+ if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "VPE: alloc_tc no mem\n");
+ return NULL;
+ }
+
+ memset(t, 0, sizeof(struct tc));
+
+ INIT_LIST_HEAD(&t->tc);
+ list_add_tail(&t->list, &vpecontrol.tc_list);
+
+ t->index = index;
+
+ return t;
+}
+
+/* clean up and free everything */
+void release_vpe(struct vpe *v)
+{
+ list_del(&v->list);
+ if (v->load_addr)
+ release_progmem(v);
+ kfree(v);
+}
+
+void dump_mtregs(void)
+{
+ unsigned long val;
+
+ val = read_c0_config3();
+ printk("config3 0x%lx MT %ld\n", val,
+ (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
+
+ val = read_c0_mvpconf0();
+ printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
+ (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
+ val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
+
+ val = read_c0_mvpcontrol();
+ printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
+ (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
+ (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
+ (val & MVPCONTROL_EVP));
+
+ val = read_c0_vpeconf0();
+ printk("VPEConf0 0x%lx MVP %ld\n", val,
+ (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+}
+
+/* Find some VPE program space */
+static void *alloc_progmem(u32 len)
+{
+#ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ /* this means you must tell linux to use less memory than you physically have */
+ return (void *)((max_pfn * PAGE_SIZE) + KSEG0);
+#else
+ // simple grab some mem for now
+ return kmalloc(len, GFP_KERNEL);
+#endif
+}
+
+static void release_progmem(void *ptr)
+{
+#ifndef CONFIG_MIPS_VPE_LOADER_TOM
+ kfree(ptr);
+#endif
+}
+
+/* Update size with this section: return offset. */
+static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
+{
+ long ret;
+
+ ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
+ *size = ret + sechdr->sh_size;
+ return ret;
+}
+
+/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
+ might -- code, read-only data, read-write data, small data. Tally
+ sizes, and place the offsets into sh_entsize fields: high bit means it
+ belongs in init. */
+static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
+ Elf_Shdr * sechdrs, const char *secstrings)
+{
+ static unsigned long const masks[][2] = {
+ /* NOTE: all executable code must be the first section
+ * in this array; otherwise modify the text_size
+ * finder in the two loops below */
+ {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
+ {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
+ {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
+ {ARCH_SHF_SMALL | SHF_ALLOC, 0}
+ };
+ unsigned int m, i;
+
+ for (i = 0; i < hdr->e_shnum; i++)
+ sechdrs[i].sh_entsize = ~0UL;
+
+ for (m = 0; m < ARRAY_SIZE(masks); ++m) {
+ for (i = 0; i < hdr->e_shnum; ++i) {
+ Elf_Shdr *s = &sechdrs[i];
+
+ // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
+ if ((s->sh_flags & masks[m][0]) != masks[m][0]
+ || (s->sh_flags & masks[m][1])
+ || s->sh_entsize != ~0UL)
+ continue;
+ s->sh_entsize = get_offset(&mod->core_size, s);
+ }
+
+ if (m == 0)
+ mod->core_text_size = mod->core_size;
+
+ }
+}
+
+
+/* from module-elf32.c, but subverted a little */
+
+struct mips_hi16 {
+ struct mips_hi16 *next;
+ Elf32_Addr *addr;
+ Elf32_Addr value;
+};
+
+static struct mips_hi16 *mips_hi16_list;
+static unsigned int gp_offs, gp_addr;
+
+static int apply_r_mips_none(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ return 0;
+}
+
+static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ int rel;
+
+ if( !(*location & 0xffff) ) {
+ rel = (int)v - gp_addr;
+ }
+ else {
+ /* .sbss + gp(relative) + offset */
+ /* kludge! */
+ rel = (int)(short)((int)v + gp_offs +
+ (int)(short)(*location & 0xffff) - gp_addr);
+ }
+
+ if( (rel > 32768) || (rel < -32768) ) {
+ printk(KERN_ERR
+ "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
+ rel, rel);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & 0xffff0000) | (rel & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_pc16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ int rel;
+ rel = (((unsigned int)v - (unsigned int)location));
+ rel >>= 2; // because the offset is in _instructions_ not bytes.
+ rel -= 1; // and one instruction less due to the branch delay slot.
+
+ if( (rel > 32768) || (rel < -32768) ) {
+ printk(KERN_ERR
+ "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+ return -ENOEXEC;
+ }
+
+ *location = (*location & 0xffff0000) | (rel & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_32(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ *location += v;
+
+ return 0;
+}
+
+static int apply_r_mips_26(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ if (v % 4) {
+ printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
+ return -ENOEXEC;
+ }
+
+/* Not desperately convinced this is a good check of an overflow condition
+ anyway. But it gets in the way of handling undefined weak symbols which
+ we want to set to zero.
+ if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+ printk(KERN_ERR
+ "module %s: relocation overflow\n",
+ me->name);
+ return -ENOEXEC;
+ }
+*/
+
+ *location = (*location & ~0x03ffffff) |
+ ((*location + (v >> 2)) & 0x03ffffff);
+ return 0;
+}
+
+static int apply_r_mips_hi16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ struct mips_hi16 *n;
+
+ /*
+ * We cannot relocate this one now because we don't know the value of
+ * the carry we need to add. Save the information, and let LO16 do the
+ * actual relocation.
+ */
+ n = kmalloc(sizeof *n, GFP_KERNEL);
+ if (!n)
+ return -ENOMEM;
+
+ n->addr = location;
+ n->value = v;
+ n->next = mips_hi16_list;
+ mips_hi16_list = n;
+
+ return 0;
+}
+
+static int apply_r_mips_lo16(struct module *me, uint32_t *location,
+ Elf32_Addr v)
+{
+ unsigned long insnlo = *location;
+ Elf32_Addr val, vallo;
+
+ /* Sign extend the addend we extract from the lo insn. */
+ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
+
+ if (mips_hi16_list != NULL) {
+ struct mips_hi16 *l;
+
+ l = mips_hi16_list;
+ while (l != NULL) {
+ struct mips_hi16 *next;
+ unsigned long insn;
+
+ /*
+ * The value for the HI16 had best be the same.
+ */
+ if (v != l->value) {
+ printk("%d != %d\n", v, l->value);
+ goto out_danger;
+ }
+
+
+ /*
+ * Do the HI16 relocation. Note that we actually don't
+ * need to know anything about the LO16 itself, except
+ * where to find the low 16 bits of the addend needed
+ * by the LO16.
+ */
+ insn = *l->addr;
+ val = ((insn & 0xffff) << 16) + vallo;
+ val += v;
+
+ /*
+ * Account for the sign extension that will happen in
+ * the low bits.
+ */
+ val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
+
+ insn = (insn & ~0xffff) | val;
+ *l->addr = insn;
+
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+
+ mips_hi16_list = NULL;
+ }
+
+ /*
+ * Ok, we're done with the HI16 relocs. Now deal with the LO16.
+ */
+ val = v + vallo;
+ insnlo = (insnlo & ~0xffff) | (val & 0xffff);
+ *location = insnlo;
+
+ return 0;
+
+out_danger:
+ printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+
+ return -ENOEXEC;
+}
+
+static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
+ Elf32_Addr v) = {
+ [R_MIPS_NONE] = apply_r_mips_none,
+ [R_MIPS_32] = apply_r_mips_32,
+ [R_MIPS_26] = apply_r_mips_26,
+ [R_MIPS_HI16] = apply_r_mips_hi16,
+ [R_MIPS_LO16] = apply_r_mips_lo16,
+ [R_MIPS_GPREL16] = apply_r_mips_gprel16,
+ [R_MIPS_PC16] = apply_r_mips_pc16
+};
+
+
+int apply_relocations(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+ unsigned int i;
+ Elf32_Addr v;
+ int res;
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ Elf32_Word r_info = rel[i].r_info;
+
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(r_info);
+
+ if (!sym->st_value) {
+ printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
+ me->name, strtab + sym->st_name);
+ /* just print the warning, dont barf */
+ }
+
+ v = sym->st_value;
+
+ res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
+ if( res ) {
+ printk(KERN_DEBUG
+ "relocation error 0x%x sym refer <%s> value 0x%x "
+ "type 0x%x r_info 0x%x\n",
+ (unsigned int)location, strtab + sym->st_name, v,
+ r_info, ELF32_R_TYPE(r_info));
+ }
+
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+void save_gp_address(unsigned int secbase, unsigned int rel)
+{
+ gp_addr = secbase + rel;
+ gp_offs = gp_addr - (secbase & 0xffff0000);
+}
+/* end module-elf32.c */
+
+
+
+/* Change all symbols so that sh_value encodes the pointer directly. */
+static int simplify_symbols(Elf_Shdr * sechdrs,
+ unsigned int symindex,
+ const char *strtab,
+ const char *secstrings,
+ unsigned int nsecs, struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned long secbase, bssbase = 0;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+ int ret = 0, size;
+
+ /* find the .bss section for COMMON symbols */
+ for (i = 0; i < nsecs; i++) {
+ if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
+ bssbase = sechdrs[i].sh_addr;
+ }
+
+ for (i = 1; i < n; i++) {
+ switch (sym[i].st_shndx) {
+ case SHN_COMMON:
+ /* Allocate space for the symbol in the .bss section. st_value is currently size.
+ We want it to have the address of the symbol. */
+
+ size = sym[i].st_value;
+ sym[i].st_value = bssbase;
+
+ bssbase += size;
+ break;
+
+ case SHN_ABS:
+ /* Don't need to do anything */
+ break;
+
+ case SHN_UNDEF:
+ /* ret = -ENOENT; */
+ break;
+
+ case SHN_MIPS_SCOMMON:
+
+ printk(KERN_DEBUG
+ "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
+ strtab + sym[i].st_name, sym[i].st_shndx);
+
+ // .sbss section
+ break;
+
+ default:
+ secbase = sechdrs[sym[i].st_shndx].sh_addr;
+
+ if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
+ save_gp_address(secbase, sym[i].st_value);
+ }
+
+ sym[i].st_value += secbase;
+ break;
+ }
+
+ }
+
+ return ret;
+}
+
+#ifdef DEBUG_ELFLOADER
+static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
+ const char *strtab, struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+ printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
+ for (i = 1; i < n; i++) {
+ printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
+ strtab + sym[i].st_name, sym[i].st_value);
+ }
+}
+#endif
+
+static void dump_tc(struct tc *t)
+{
+ printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
+ t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
+ printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+}
+
+static void dump_tclist(void)
+{
+ struct tc *t;
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ dump_tc(t);
+ }
+}
+
+/* We are prepared so configure and start the VPE... */
+int vpe_run(vpe_t * v)
+{
+ unsigned long val;
+ struct tc *t;
+
+ /* check we are the Master VPE */
+ val = read_c0_vpeconf0();
+ if (!(val & VPECONF0_MVP)) {
+ printk(KERN_WARNING
+ "VPE: only Master VPE's are allowed to configure MT\n");
+ return -1;
+ }
+
+ /* disable MT (using dvpe) */
+ dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC);
+
+ if (!list_empty(&v->tc)) {
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ printk(KERN_WARNING "VPE: TC %d is already in use.\n",
+ t->index);
+ return -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
+ v->minor);
+ return -ENOEXEC;
+ }
+
+ settc(t->index);
+
+ val = read_vpe_c0_vpeconf0();
+
+ /* should check it is halted, and not activated */
+ if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
+ printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
+ t->index);
+
+ dump_tclist();
+ return -ENOEXEC;
+ }
+
+ /* Write the address we want it to start running from in the TCPC register. */
+ write_tc_c0_tcrestart((unsigned long)v->__start);
+
+ /* write the sivc_info address to tccontext */
+ write_tc_c0_tccontext((unsigned long)0);
+
+ /* Set up the XTC bit in vpeconf0 to point at our tc */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
+
+ /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
+ val = read_tc_c0_tcstatus();
+ val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
+ write_tc_c0_tcstatus(val);
+
+ write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
+ /* set up VPE1 */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE
+
+ /*
+ * The sde-kit passes 'memsize' to __start in $a3, so set something
+ * here...
+ * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
+ * DFLT_HEAP_SIZE when you compile your program
+ */
+
+ mttgpr(7, 0);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config(read_c0_config());
+
+ /* clear out any left overs from a previous program */
+ write_vpe_c0_cause(0);
+
+ /* take system out of configuration state */
+ write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC);
+
+ /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
+ write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
+
+ /* set it running */
+ evpe(EVPE_ENABLE);
+
+ return 0;
+}
+
+static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs,
+ unsigned int symindex, const char *strtab,
+ struct module *mod)
+{
+ Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+ unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+
+ for (i = 1; i < n; i++) {
+ if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
+ v->__start = sym[i].st_value;
+ }
+
+ if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
+ v->shared_ptr = (void *)sym[i].st_value;
+ }
+ }
+
+ return 0;
+}
+
+/* Allocates a VPE with some program code space(the load address), copies the contents
+ of the program (p)buffer performing relocatations/etc, free's it when finished.
+*/
+int vpe_elfload(vpe_t * v)
+{
+ Elf_Ehdr *hdr;
+ Elf_Shdr *sechdrs;
+ long err = 0;
+ char *secstrings, *strtab = NULL;
+ unsigned int len, i, symindex = 0, strindex = 0;
+
+ struct module mod; // so we can re-use the relocations code
+
+ memset(&mod, 0, sizeof(struct module));
+ strcpy(mod.name, "VPE dummy prog module");
+
+ hdr = (Elf_Ehdr *) v->pbuffer;
+ len = v->plen;
+
+ /* Sanity checks against insmoding binaries or wrong arch,
+ weird elf version */
+ if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ || hdr->e_type != ET_REL || !elf_check_arch(hdr)
+ || hdr->e_shentsize != sizeof(*sechdrs)) {
+ printk(KERN_WARNING
+ "VPE program, wrong arch or weird elf version\n");
+
+ return -ENOEXEC;
+ }
+
+ if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+ printk(KERN_ERR "VPE program length %u truncated\n", len);
+ return -ENOEXEC;
+ }
+
+ /* Convenience variables */
+ sechdrs = (void *)hdr + hdr->e_shoff;
+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+ sechdrs[0].sh_addr = 0;
+
+ /* And these should exist, but gcc whinges if we don't init them */
+ symindex = strindex = 0;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+
+ if (sechdrs[i].sh_type != SHT_NOBITS
+ && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
+ printk(KERN_ERR "VPE program length %u truncated\n",
+ len);
+ return -ENOEXEC;
+ }
+
+ /* Mark all sections sh_addr with their address in the
+ temporary image. */
+ sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+
+ /* Internal symbols and strings. */
+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ symindex = i;
+ strindex = sechdrs[i].sh_link;
+ strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+ }
+ }
+
+ layout_sections(&mod, hdr, sechdrs, secstrings);
+
+ v->load_addr = alloc_progmem(mod.core_size);
+ memset(v->load_addr, 0, mod.core_size);
+
+ printk("VPE elf_loader: loading to %p\n", v->load_addr);
+
+ for (i = 0; i < hdr->e_shnum; i++) {
+ void *dest;
+
+ if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+ continue;
+
+ dest = v->load_addr + sechdrs[i].sh_entsize;
+
+ if (sechdrs[i].sh_type != SHT_NOBITS)
+ memcpy(dest, (void *)sechdrs[i].sh_addr,
+ sechdrs[i].sh_size);
+ /* Update sh_addr to point to copy in image. */
+ sechdrs[i].sh_addr = (unsigned long)dest;
+ }
+
+ /* Fix up syms, so that st_value is a pointer to location. */
+ err =
+ simplify_symbols(sechdrs, symindex, strtab, secstrings,
+ hdr->e_shnum, &mod);
+ if (err < 0) {
+ printk(KERN_WARNING "VPE: unable to simplify symbols\n");
+ goto cleanup;
+ }
+
+ /* Now do relocations. */
+ for (i = 1; i < hdr->e_shnum; i++) {
+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ unsigned int info = sechdrs[i].sh_info;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ /* Don't bother with non-allocated sections */
+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+ continue;
+
+ if (sechdrs[i].sh_type == SHT_REL)
+ err =
+ apply_relocations(sechdrs, strtab, symindex, i, &mod);
+ else if (sechdrs[i].sh_type == SHT_RELA)
+ err = apply_relocate_add(sechdrs, strtab, symindex, i,
+ &mod);
+ if (err < 0) {
+ printk(KERN_WARNING
+ "vpe_elfload: error in relocations err %ld\n",
+ err);
+ goto cleanup;
+ }
+ }
+
+ /* make sure it's physically written out */
+ flush_icache_range((unsigned long)v->load_addr,
+ (unsigned long)v->load_addr + v->len);
+
+ if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+
+ printk(KERN_WARNING
+ "VPE: program doesn't contain __start or vpe_shared symbols\n");
+ err = -ENOEXEC;
+ }
+
+ printk(" elf loaded\n");
+
+cleanup:
+ return err;
+}
+
+static void dump_vpe(vpe_t * v)
+{
+ struct tc *t;
+
+ printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
+ printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
+
+ list_for_each_entry(t, &vpecontrol.tc_list, list) {
+ dump_tc(t);
+ }
+}
+
+/* checks for VPE is unused and gets ready to load program */
+static int vpe_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+ vpe_t *v;
+
+ /* assume only 1 device at the mo. */
+ if ((minor = MINOR(inode->i_rdev)) != 1) {
+ printk(KERN_WARNING "VPE: only vpe1 is supported\n");
+ return -ENODEV;
+ }
+
+ if ((v = get_vpe(minor)) == NULL) {
+ printk(KERN_WARNING "VPE: unable to get vpe\n");
+ return -ENODEV;
+ }
+
+ if (v->state != VPE_STATE_UNUSED) {
+ unsigned long tmp;
+ struct tc *t;
+
+ printk(KERN_WARNING "VPE: device %d already in use\n", minor);
+
+ dvpe();
+ dump_vpe(v);
+
+ printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
+
+ release_progmem(v->load_addr);
+
+ t = get_tc(minor);
+ settc(minor);
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+
+ }
+
+ // allocate it so when we get write ops we know it's expected.
+ v->state = VPE_STATE_INUSE;
+
+ /* this of-course trashes what was there before... */
+ v->pbuffer = vmalloc(P_SIZE);
+ v->plen = P_SIZE;
+ v->load_addr = NULL;
+ v->len = 0;
+
+ return 0;
+}
+
+static int vpe_release(struct inode *inode, struct file *filp)
+{
+ int minor, ret = 0;
+ vpe_t *v;
+ Elf_Ehdr *hdr;
+
+ minor = MINOR(inode->i_rdev);
+ if ((v = get_vpe(minor)) == NULL)
+ return -ENODEV;
+
+ // simple case of fire and forget, so tell the VPE to run...
+
+ hdr = (Elf_Ehdr *) v->pbuffer;
+ if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (vpe_elfload(v) >= 0)
+ vpe_run(v);
+ else {
+ printk(KERN_WARNING "VPE: ELF load failed.\n");
+ ret = -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE: only elf files are supported\n");
+ ret = -ENOEXEC;
+ }
+
+ // cleanup any temp buffers
+ if (v->pbuffer)
+ vfree(v->pbuffer);
+ v->plen = 0;
+ return ret;
+}
+
+static ssize_t vpe_write(struct file *file, const char __user * buffer,
+ size_t count, loff_t * ppos)
+{
+ int minor;
+ size_t ret = count;
+ vpe_t *v;
+
+ minor = MINOR(file->f_dentry->d_inode->i_rdev);
+ if ((v = get_vpe(minor)) == NULL)
+ return -ENODEV;
+
+ if (v->pbuffer == NULL) {
+ printk(KERN_ERR "vpe_write: no pbuffer\n");
+ return -ENOMEM;
+ }
+
+ if ((count + v->len) > v->plen) {
+ printk(KERN_WARNING
+ "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
+ return -ENOMEM;
+ }
+
+ count -= copy_from_user(v->pbuffer + v->len, buffer, count);
+ if (!count) {
+ printk("vpe_write: copy_to_user failed\n");
+ return -EFAULT;
+ }
+
+ v->len += count;
+ return ret;
+}
+
+static struct file_operations vpe_fops = {
+ .owner = THIS_MODULE,
+ .open = vpe_open,
+ .release = vpe_release,
+ .write = vpe_write
+};
+
+/* module wrapper entry points */
+/* give me a vpe */
+vpe_handle vpe_alloc(void)
+{
+ int i;
+ struct vpe *v;
+
+ /* find a vpe */
+ for (i = 1; i < MAX_VPES; i++) {
+ if ((v = get_vpe(i)) != NULL) {
+ v->state = VPE_STATE_INUSE;
+ return v;
+ }
+ }
+ return NULL;
+}
+
+EXPORT_SYMBOL(vpe_alloc);
+
+/* start running from here */
+int vpe_start(vpe_handle vpe, unsigned long start)
+{
+ struct vpe *v = vpe;
+
+ v->__start = start;
+ return vpe_run(v);
+}
+
+EXPORT_SYMBOL(vpe_start);
+
+/* halt it for now */
+int vpe_stop(vpe_handle vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ evpe_flags = dvpe();
+
+ if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+ }
+
+ evpe(evpe_flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(vpe_stop);
+
+/* I've done with it thank you */
+int vpe_free(vpe_handle vpe)
+{
+ struct vpe *v = vpe;
+ struct tc *t;
+ unsigned int evpe_flags;
+
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ return -ENOEXEC;
+ }
+
+ evpe_flags = dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC);
+
+ settc(t->index);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
+
+ /* mark the TC unallocated and halt'ed */
+ write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+ write_tc_c0_tchalt(TCHALT_H);
+
+ v->state = VPE_STATE_UNUSED;
+
+ write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC);
+ evpe(evpe_flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(vpe_free);
+
+void *vpe_get_shared(int index)
+{
+ struct vpe *v;
+
+ if ((v = get_vpe(index)) == NULL) {
+ printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
+ return NULL;
+ }
+
+ return v->shared_ptr;
+}
+
+EXPORT_SYMBOL(vpe_get_shared);
+
+static int __init vpe_module_init(void)
+{
+ struct vpe *v = NULL;
+ struct tc *t;
+ unsigned long val;
+ int i;
+
+ if (!cpu_has_mipsmt) {
+ printk("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) {
+ printk("VPE loader: unable to register character device\n");
+ return -EBUSY;
+ }
+
+ if (major == 0)
+ major = VPE_MAJOR;
+
+ dmt();
+ dvpe();
+
+ /* Put MVPE's into 'configuration state' */
+ write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC);
+
+ /* dump_mtregs(); */
+
+ INIT_LIST_HEAD(&vpecontrol.vpe_list);
+ INIT_LIST_HEAD(&vpecontrol.tc_list);
+
+ val = read_c0_mvpconf0();
+ for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
+ t = alloc_tc(i);
+
+ /* VPE's */
+ if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
+ settc(i);
+
+ if ((v = alloc_vpe(i)) == NULL) {
+ printk(KERN_WARNING "VPE: unable to allocate VPE\n");
+ return -ENODEV;
+ }
+
+ list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */
+
+ /* deactivate all but vpe0 */
+ if (i != 0) {
+ unsigned long tmp = read_vpe_c0_vpeconf0();
+
+ tmp &= ~VPECONF0_VPA;
+
+ /* master VPE */
+ tmp |= VPECONF0_MVP;
+ write_vpe_c0_vpeconf0(tmp);
+ }
+
+ /* disable multi-threading with TC's */
+ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
+
+ if (i != 0) {
+ write_vpe_c0_status((read_c0_status() &
+ ~(ST0_IM | ST0_IE | ST0_KSU))
+ | ST0_CU0);
+
+ /* set config to be the same as vpe0, particularly kseg0 coherency alg */
+ write_vpe_c0_config(read_c0_config());
+ }
+
+ }
+
+ /* TC's */
+ t->pvpe = v; /* set the parent vpe */
+
+ if (i != 0) {
+ unsigned long tmp;
+
+ /* tc 0 will of course be running.... */
+ if (i == 0)
+ t->state = TC_STATE_RUNNING;
+
+ settc(i);
+
+ /* bind a TC to each VPE, May as well put all excess TC's
+ on the last VPE */
+ if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
+ write_tc_c0_tcbind(read_tc_c0_tcbind() |
+ ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
+ else
+ write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
+
+ tmp = read_tc_c0_tcstatus();
+
+ /* mark not allocated and not dynamically allocatable */
+ tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+ tmp |= TCSTATUS_IXMT; /* interrupt exempt */
+ write_tc_c0_tcstatus(tmp);
+
+ write_tc_c0_tchalt(TCHALT_H);
+ }
+ }
+
+ /* release config state */
+ write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC);
+
+ return 0;
+}
+
+static void __exit vpe_module_exit(void)
+{
+ struct vpe *v, *n;
+
+ list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+ if (v->state != VPE_STATE_UNUSED) {
+ release_vpe(v);
+ }
+ }
+
+ unregister_chrdev(major, module_name);
+}
+
+module_init(vpe_module_init);
+module_exit(vpe_module_exit);
+MODULE_DESCRIPTION("MIPS VPE Loader");
+MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index d821b13d24a0..58256ea33102 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -28,6 +28,8 @@
#include <asm/gt64120.h>
#include <asm/io.h>
#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
@@ -224,6 +226,30 @@ void __init kgdb_config (void)
}
#endif
+void __init mips_nmi_setup (void)
+{
+ void *base;
+ extern char except_vec_nmi;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa80) :
+ (void *)(CAC_BASE + 0x380);
+ memcpy(base, &except_vec_nmi, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void __init mips_ejtag_setup (void)
+{
+ void *base;
+ extern char except_vec_ejtag_debug;
+
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa00) :
+ (void *)(CAC_BASE + 0x300);
+ memcpy(base, &except_vec_ejtag_debug, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
void __init prom_init(void)
{
u32 start, map, mask, data;
@@ -353,6 +379,9 @@ void __init prom_init(void)
while(1); /* We die here... */
}
#endif
+ board_nmi_handler_setup = mips_nmi_setup;
+ board_ejtag_handler_setup = mips_ejtag_setup;
+
prom_printf("\nLINUX started...\n");
prom_init_cmdline();
prom_meminit();
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 5ae2b43e4c2e..2c8afd77a20b 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
+#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
@@ -55,18 +56,30 @@ struct prom_pmemblock * __init prom_getmdesc(void)
{
char *memsize_str;
unsigned int memsize;
+ char cmdline[CL_SIZE], *ptr;
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
- prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
- memsize = 0x02000000;
- } else {
+ /* Check the command line first for a memsize directive */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr) {
+ memsize = memparse(ptr + 8, &ptr);
+ }
+ else {
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+ memsize = 0x02000000;
+ } else {
#ifdef DEBUG
- prom_printf("prom_memsize = %s\n", memsize_str);
+ prom_printf("prom_memsize = %s\n", memsize_str);
#endif
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
}
-
memset(mdesc, 0, sizeof(mdesc));
mdesc[0].type = yamon_dontuse;
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 131f49bccb20..a397ecb872d6 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -29,6 +29,20 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#define CASCADE_IRQ MIPSCPU_INT_ATLAS
+#define CASCADE_DISPATCH atlas_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/maltaint.h>
+#define CASCADE_IRQ MIPSCPU_INT_I8259A
+#define CASCADE_DISPATCH malta_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
+
/* A lot of complication here is taken away because:
*
* 1) We handle one interrupt and return, sitting in a loop and moving across
@@ -80,74 +94,62 @@
mfc0 s0, CP0_CAUSE # get irq bits
mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
and s0, s1
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
- /* Wheee, a timer interrupt. */
- move a0, sp
- jal mips_timer_interrupt
- nop
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
- j ret_from_irq
- nop
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
-#else
- beq a0, zero, 1f # delay slot, check hw3 interrupt
- andi a0, s0, CAUSEF_IP5
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
#endif
- /* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
- jal atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
- jal malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
- jal sead_hw0_irqdispatch
-#else
-#error "MIPS board not supported\n"
-#endif
- move a0, sp # delay slot
+#ifdef CASCADE_IRQ
+ li a1, CASCADE_IRQ
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
- j ret_from_irq
- nop # delay slot
+ jal CASCADE_DISPATCH
+ move a0, sp
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
- jal sead_hw1_irqdispatch
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
- beq a0, zero, 1f # check hw3 (coreHI) interrupt
- nop
- jal corehi_irqdispatch
- move a0, sp
j ret_from_irq
nop
1:
+#else
+ addu a0, MIPSCPU_INT_BASE
#endif
- /*
- * Here by mistake? This is possible, what can happen is that by the
- * time we take the exception the IRQ pin goes low, so just leave if
- * this is the case.
- */
- move a1,s0
- PRINT("Got interrupt: c0_cause = %08x\n")
- mfc0 a1, CP0_EPC
- PRINT("c0_epc = %08x\n")
+
+ jal do_IRQ
+ move a1, sp
j ret_from_irq
nop
+
+
+spurious:
+ j spurious_interrupt
+ nop
END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 16315444dd5a..3a6f1428b2cb 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -31,22 +31,21 @@
#include <asm/mipsregs.h>
#include <asm/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/cpu.h>
#include <asm/time.h>
#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/mc146818-time.h>
unsigned long cpu_khz;
-#if defined(CONFIG_MIPS_SEAD)
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5)
-#else
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-#endif
-
#if defined(CONFIG_MIPS_ATLAS)
static char display_string[] = " LINUX ON ATLAS ";
#endif
@@ -59,20 +58,27 @@ static char display_string[] = " LINUX ON SEAD ";
static unsigned int display_count = 0;
#define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
-#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1)
-
static unsigned int timer_tick_count=0;
+static int mips_cpu_timer_irq;
-void mips_timer_interrupt(struct pt_regs *regs)
+static void mips_timer_dispatch (struct pt_regs *regs)
{
+ do_IRQ (mips_cpu_timer_irq, regs);
+}
+
+irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ irqreturn_t r;
+
+ r = timer_interrupt(irq, dev_id, regs);
+
if ((timer_tick_count++ % HZ) == 0) {
mips_display_message(&display_string[display_count++]);
if (display_count == MAX_DISPLAY_COUNT)
- display_count = 0;
-
+ display_count = 0;
}
- ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
+ return r;
}
/*
@@ -140,10 +146,8 @@ void __init mips_time_init(void)
local_irq_save(flags);
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
/* Set Data mode - binary. */
CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-#endif
est_freq = estimate_cpu_frequency ();
@@ -157,11 +161,22 @@ void __init mips_time_init(void)
void __init mips_timer_setup(struct irqaction *irq)
{
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ }
+ else {
+ if (cpu_has_vint)
+ set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
+ }
+
+
/* we are using the cpu counter for timer interrupts */
- irq->handler = no_action; /* we use our own handler */
- setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+ irq->handler = mips_timer_interrupt; /* we use our own handler */
+ setup_irq(mips_cpu_timer_irq, irq);
+
/* to generate the first timer interrupt */
write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
- set_c0_status(ALLINTS);
}
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index dd2db35966bc..6f99a4492015 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -30,6 +30,7 @@
#include <linux/random.h>
#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
#include <asm/io.h>
#include <asm/mips-boards/malta.h>
#include <asm/mips-boards/maltaint.h>
@@ -37,8 +38,10 @@
#include <asm/gt64120.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/msc01_pci.h>
+#include <asm/msc01_ic.h>
extern asmlinkage void mipsIRQ(void);
+extern void mips_timer_interrupt(void);
static DEFINE_SPINLOCK(mips_irq_lock);
@@ -91,13 +94,13 @@ static inline int mips_pcibios_iack(void)
return irq;
}
-static inline int get_int(int *irq)
+static inline int get_int(void)
{
unsigned long flags;
-
+ int irq;
spin_lock_irqsave(&mips_irq_lock, flags);
- *irq = mips_pcibios_iack();
+ irq = mips_pcibios_iack();
/*
* IRQ7 is used to detect spurious interrupts.
@@ -106,73 +109,82 @@ static inline int get_int(int *irq)
* We can differentiate between this situation and a
* "Normal" IRQ7 by reading the ISR.
*/
- if (*irq == 7)
+ if (irq == 7)
{
outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR,
PIIX4_ICTLR1_OCW3);
if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) {
- spin_unlock_irqrestore(&mips_irq_lock, flags);
+ irq = -1; /* Spurious interrupt */
printk("We got a spurious interrupt from PIIX4.\n");
atomic_inc(&irq_err_count);
- return -1; /* Spurious interrupt. */
}
}
spin_unlock_irqrestore(&mips_irq_lock, flags);
- return 0;
+ return irq;
}
void malta_hw0_irqdispatch(struct pt_regs *regs)
{
int irq;
- if (get_int(&irq))
- return; /* interrupt has already been cleared */
+ irq = get_int();
+ if (irq < 0)
+ return; /* interrupt has already been cleared */
- do_IRQ(irq, regs);
+ do_IRQ(MALTA_INT_BASE+irq, regs);
}
void corehi_irqdispatch(struct pt_regs *regs)
{
- unsigned int data,datahi;
-
- /* Mask out corehi interrupt. */
- clear_c0_status(IE_IRQ3);
+ unsigned int intrcause,datalo,datahi;
+ unsigned int pcimstat, intisr, inten, intpol, intedge, intsteer, pcicmd, pcibadaddr;
printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
, regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
+
+ /* Read all the registers and then print them as there is a
+ problem with interspersed printk's upsetting the Bonito controller.
+ Do it for the others too.
+ */
+
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
- case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ ll_msc_irq(regs);
break;
case MIPS_REVISION_CORID_QED_RM5261:
case MIPS_REVISION_CORID_CORE_LV:
case MIPS_REVISION_CORID_CORE_FPGA:
case MIPS_REVISION_CORID_CORE_FPGAR2:
- data = GT_READ(GT_INTRCAUSE_OFS);
- printk("GT_INTRCAUSE = %08x\n", data);
- data = GT_READ(GT_CPUERR_ADDRLO_OFS);
+ intrcause = GT_READ(GT_INTRCAUSE_OFS);
+ datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
- printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data);
+ printk("GT_INTRCAUSE = %08x\n", intrcause);
+ printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo);
break;
case MIPS_REVISION_CORID_BONITO64:
case MIPS_REVISION_CORID_CORE_20K:
case MIPS_REVISION_CORID_CORE_EMUL_BON:
- data = BONITO_INTISR;
- printk("BONITO_INTISR = %08x\n", data);
- data = BONITO_INTEN;
- printk("BONITO_INTEN = %08x\n", data);
- data = BONITO_INTPOL;
- printk("BONITO_INTPOL = %08x\n", data);
- data = BONITO_INTEDGE;
- printk("BONITO_INTEDGE = %08x\n", data);
- data = BONITO_INTSTEER;
- printk("BONITO_INTSTEER = %08x\n", data);
- data = BONITO_PCICMD;
- printk("BONITO_PCICMD = %08x\n", data);
+ pcibadaddr = BONITO_PCIBADADDR;
+ pcimstat = BONITO_PCIMSTAT;
+ intisr = BONITO_INTISR;
+ inten = BONITO_INTEN;
+ intpol = BONITO_INTPOL;
+ intedge = BONITO_INTEDGE;
+ intsteer = BONITO_INTSTEER;
+ pcicmd = BONITO_PCICMD;
+ printk("BONITO_INTISR = %08x\n", intisr);
+ printk("BONITO_INTEN = %08x\n", inten);
+ printk("BONITO_INTPOL = %08x\n", intpol);
+ printk("BONITO_INTEDGE = %08x\n", intedge);
+ printk("BONITO_INTSTEER = %08x\n", intsteer);
+ printk("BONITO_PCICMD = %08x\n", pcicmd);
+ printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+ printk("BONITO_PCIMSTAT = %08x\n", pcimstat);
break;
}
@@ -180,8 +192,70 @@ void corehi_irqdispatch(struct pt_regs *regs)
die("CoreHi interrupt", regs);
}
+static struct irqaction i8259irq = {
+ .handler = no_action,
+ .name = "XT-PIC cascade"
+};
+
+static struct irqaction corehi_irqaction = {
+ .handler = no_action,
+ .name = "CoreHi"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+ {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+ {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
+
void __init arch_init_irq(void)
{
set_except_vector(0, mipsIRQ);
init_i8259_irqs();
+
+ if (!cpu_has_veic)
+ mips_cpu_irq_init (MIPSCPU_INT_BASE);
+
+ switch(mips_revision_corid) {
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ if (cpu_has_veic)
+ init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+ else
+ init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+ }
+
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
+ set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
+ setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
+ setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
+ }
+ else if (cpu_has_vint) {
+ set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
+ set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
+
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+ }
+ else {
+ set_except_vector(0, mipsIRQ);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+ setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+ }
}
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index d3e352fb3243..6a1267ad071f 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1228,8 +1228,7 @@ void __init ld_mmu_r4xx0(void)
struct cpuinfo_mips *c = &current_cpu_data;
/* Default cache error handler for R4000 and R5000 family */
- memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x80);
- memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_generic, 0x80);
+ set_uncached_handler (0x100, &except_vec2_generic, 0x80);
probe_pcache();
setup_scache();
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index e65b1bb576fd..d183dbced687 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -502,9 +502,8 @@ void ld_mmu_sb1(void)
extern char handle_vec2_sb1;
/* Special cache error handler for SB1 */
- memcpy((void *)(CAC_BASE + 0x100), &except_vec2_sb1, 0x80);
- memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80);
- memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80);
+ set_uncached_handler (0x100, &except_vec2_sb1, 0x80);
+ memcpy((void *)KSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80);
probe_cache_sizes();
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 00:30:57 +0000