diff options
Diffstat (limited to 'arch')
148 files changed, 0 insertions, 15657 deletions
diff --git a/arch/unicore32/.gitignore b/arch/unicore32/.gitignore deleted file mode 100644 index e82f3fb57ba0..000000000000 --- a/arch/unicore32/.gitignore +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Generated include files -# -include/generated -# -# Generated ld script file -# -kernel/vmlinux.lds -# -# Generated images in boot -# -boot/Image -boot/zImage -boot/uImage -# -# Generated files in boot/compressed -# -boot/compressed/piggy.S -boot/compressed/piggy.gzip -boot/compressed/vmlinux -boot/compressed/vmlinux.lds diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig deleted file mode 100644 index 11ba1839d198..000000000000 --- a/arch/unicore32/Kconfig +++ /dev/null @@ -1,200 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config UNICORE32 - def_bool y - select ARCH_32BIT_OFF_T - select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_HAS_KEEPINITRD - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select HAVE_KERNEL_GZIP - select HAVE_KERNEL_BZIP2 - select GENERIC_ATOMIC64 - select HAVE_KERNEL_LZO - select HAVE_KERNEL_LZMA - select HAVE_PCI - select VIRT_TO_BUS - select ARCH_HAVE_CUSTOM_GPIO_H - select GENERIC_FIND_FIRST_BIT - select GENERIC_IRQ_PROBE - select GENERIC_IRQ_SHOW - select ARCH_WANT_FRAME_POINTERS - select GENERIC_IOMAP - select MODULES_USE_ELF_REL - select NEED_DMA_MAP_STATE - select MMU_GATHER_NO_RANGE if MMU - help - UniCore-32 is 32-bit Instruction Set Architecture, - including a series of low-power-consumption RISC chip - designs licensed by PKUnity Ltd. - Please see web page at <http://www.pkunity.com/>. - -config GENERIC_CSUM - def_bool y - -config NO_IOPORT_MAP - bool - -config STACKTRACE_SUPPORT - def_bool y - -config LOCKDEP_SUPPORT - def_bool y - -config ARCH_HAS_ILOG2_U32 - bool - -config ARCH_HAS_ILOG2_U64 - bool - -config GENERIC_HWEIGHT - def_bool y - -config GENERIC_CALIBRATE_DELAY - def_bool y - -config ARCH_MAY_HAVE_PC_FDC - bool - -config ZONE_DMA - def_bool y - -menu "System Type" - -config MMU - def_bool y - -config ARCH_FPGA - bool - -config ARCH_PUV3 - def_bool y - select CPU_UCV2 - select GENERIC_CLOCKEVENTS - select HAVE_LEGACY_CLK - select GPIOLIB - -# CONFIGs for ARCH_PUV3 - -if ARCH_PUV3 - -choice - prompt "Board Selection" - default PUV3_DB0913 - -config PUV3_FPGA_DLX200 - select ARCH_FPGA - bool "FPGA board" - -config PUV3_DB0913 - bool "DEBUG board (0913)" - -config PUV3_NB0916 - bool "NetBook board (0916)" - select PWM - select PWM_PUV3 - -config PUV3_SMW0919 - bool "Security Mini-Workstation board (0919)" - -endchoice - -config PUV3_PM - def_bool y if !ARCH_FPGA - -endif - -source "arch/unicore32/mm/Kconfig" - -comment "Floating point support" - -config UNICORE_FPU_F64 - def_bool y if !ARCH_FPGA - -endmenu - -menu "Kernel Features" - -source "kernel/Kconfig.hz" - -config LEDS - def_bool y - depends on GPIOLIB - -config ALIGNMENT_TRAP - def_bool y - help - Unicore processors can not fetch/store information which is not - naturally aligned on the bus, i.e., a 4 byte fetch must start at an - address divisible by 4. On 32-bit Unicore processors, these non-aligned - fetch/store instructions will be emulated in software if you say - here, which has a severe performance impact. This is necessary for - correct operation of some network protocols. With an IP-only - configuration it is safe to say N, otherwise say Y. - -endmenu - -menu "Boot options" - -config CMDLINE - string "Default kernel command string" - default "" - -config CMDLINE_FORCE - bool "Always use the default kernel command string" - depends on CMDLINE != "" - help - Always use the default kernel command string, even if the boot - loader passes other arguments to the kernel. - This is useful if you cannot or don't want to change the - command-line options your boot loader passes to the kernel. - - If unsure, say N. - -endmenu - -menu "Power management options" - -source "kernel/power/Kconfig" - -source "drivers/cpufreq/Kconfig" - -config ARCH_SUSPEND_POSSIBLE - def_bool y if !ARCH_FPGA - -config ARCH_HIBERNATION_POSSIBLE - def_bool y if !ARCH_FPGA - -endmenu - -if ARCH_PUV3 - -config PUV3_GPIO - bool - depends on !ARCH_FPGA - select GPIO_SYSFS - default y - -if PUV3_NB0916 - -menu "PKUnity NetBook-0916 Features" - -config I2C_BATTERY_BQ27200 - tristate "I2C Battery BQ27200 Support" - select I2C_PUV3 - select POWER_SUPPLY - select BATTERY_BQ27XXX - -config I2C_EEPROM_AT24 - tristate "I2C EEPROMs AT24 support" - select I2C_PUV3 - select EEPROM_AT24 - -config LCD_BACKLIGHT - tristate "LCD Backlight support" - select BACKLIGHT_PWM - -endmenu - -endif - -endif diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug deleted file mode 100644 index ca0ff97657ef..000000000000 --- a/arch/unicore32/Kconfig.debug +++ /dev/null @@ -1,29 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -config EARLY_PRINTK - def_bool DEBUG_OCD - help - Write kernel log output directly into the ocd or to a serial port. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. For normal operation - it is not recommended because it looks ugly and doesn't cooperate - with klogd/syslogd or the X server. You should normally N here, - unless you want to debug such a crash. - -# These options are only for real kernel hackers who want to get their hands dirty. -config DEBUG_LL - bool "Kernel low-level debugging functions" - depends on DEBUG_KERNEL - help - Say Y here to include definitions of printascii, printch, printhex - in the kernel. This is helpful if you are debugging code that - executes before the console is initialized. - -config DEBUG_OCD - bool "Kernel low-level debugging via On-Chip-Debugger" - depends on DEBUG_LL - default y - help - Say Y here if you want the debug print routines to direct their - output to the UniCore On-Chip-Debugger channel using CP #1. diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile deleted file mode 100644 index 390819947c37..000000000000 --- a/arch/unicore32/Makefile +++ /dev/null @@ -1,59 +0,0 @@ -# -# arch/unicore32/Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2002~2010 by Guan Xue-tao -# -ifneq ($(SUBARCH),$(ARCH)) - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, unicore32-linux-) - endif -endif - -LDFLAGS_vmlinux := -p --no-undefined -X - -OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -S - -# Never generate .eh_frame -KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) - -# Never use hard float in kernel -KBUILD_CFLAGS += -msoft-float - -ifeq ($(CONFIG_FRAME_POINTER),y) -KBUILD_CFLAGS += -mno-sched-prolog -endif - -CHECKFLAGS += -D__unicore32__ - -head-y := arch/unicore32/kernel/head.o - -core-y += arch/unicore32/kernel/ -core-y += arch/unicore32/mm/ - -libs-y += arch/unicore32/lib/ - -boot := arch/unicore32/boot - -# Default target when executing plain make -KBUILD_IMAGE := $(boot)/zImage - -all: zImage - -zImage Image uImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -archclean: - $(Q)$(MAKE) $(clean)=$(boot) - -define archhelp - echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' - echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' - echo ' uImage - U-Boot wrapped zImage' -endef diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile deleted file mode 100644 index 828855007b29..000000000000 --- a/arch/unicore32/boot/Makefile +++ /dev/null @@ -1,39 +0,0 @@ -# -# arch/unicore32/boot/Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2001~2010 GUAN Xue-tao -# - -targets := Image zImage uImage - -$(obj)/Image: vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -$(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ - -$(obj)/zImage: $(obj)/compressed/vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -UIMAGE_ARCH = unicore -UIMAGE_LOADADDR = 0x0 - -$(obj)/uImage: $(obj)/zImage FORCE - $(call if_changed,uimage) - @echo ' Image $@ is ready' - -PHONY += initrd -initrd: - @test "$(INITRD)" != "" || \ - (echo You must specify INITRD; exit -1) - -subdir- := compressed diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile deleted file mode 100644 index 150fafc32fb0..000000000000 --- a/arch/unicore32/boot/compressed/Makefile +++ /dev/null @@ -1,64 +0,0 @@ -# -# linux/arch/unicore32/boot/compressed/Makefile -# -# create a compressed vmlinuz image from the original vmlinux -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2001~2010 GUAN Xue-tao -# - -ccflags-y := -fpic -fno-builtin -asflags-y := -Wa,-march=all - -OBJS := misc.o - -# font.c and font.o -CFLAGS_font.o := -Dstatic= -$(obj)/font.c: $(srctree)/lib/fonts/font_8x8.c - $(call cmd,shipped) - -# piggy.S and piggy.o -suffix_$(CONFIG_KERNEL_GZIP) := gzip -suffix_$(CONFIG_KERNEL_BZIP2) := bz2 -suffix_$(CONFIG_KERNEL_LZO) := lzo -suffix_$(CONFIG_KERNEL_LZMA) := lzma - -$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE - $(call if_changed,$(suffix_y)) - -SEDFLAGS_piggy = s/DECOMP_SUFFIX/$(suffix_y)/ -$(obj)/piggy.S: $(obj)/piggy.S.in - @sed "$(SEDFLAGS_piggy)" < $< > $@ - -$(obj)/piggy.o: $(obj)/piggy.$(suffix_y) $(obj)/piggy.S FORCE - -targets := vmlinux vmlinux.lds font.o font.c head.o misc.o \ - piggy.$(suffix_y) piggy.o piggy.S \ - -# Make sure files are removed during clean -extra-y += piggy.gzip piggy.bz2 piggy.lzo piggy.lzma - -# ? -LDFLAGS_vmlinux += -p -# Report unresolved symbol references -LDFLAGS_vmlinux += --no-undefined -# Delete all temporary local symbols -LDFLAGS_vmlinux += -X -# Next argument is a linker script -LDFLAGS_vmlinux += -T - -# For uidivmod -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head.o $(obj)/piggy.o \ - $(obj)/misc.o FORCE - $(call if_changed,ld) - -# We now have a PIC decompressor implementation. Decompressors running -# from RAM should not define ZTEXTADDR. Decompressors running directly -# from ROM or Flash must define ZTEXTADDR (preferably via the config) -ZTEXTADDR := 0x03000000 -ZBSSADDR := ALIGN(4) - -CPPFLAGS_vmlinux.lds = -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" diff --git a/arch/unicore32/boot/compressed/head.S b/arch/unicore32/boot/compressed/head.S deleted file mode 100644 index 5f72662cd294..000000000000 --- a/arch/unicore32/boot/compressed/head.S +++ /dev/null @@ -1,201 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/boot/compressed/head.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <mach/memory.h> - -#define csub cmpsub -#define cand cmpand -#define nop8 nop; nop; nop; nop; nop; nop; nop; nop - - .section ".start", #alloc, #execinstr - .text -start: - .type start,#function - - /* Initialize ASR, PRIV mode and INTR off */ - mov r0, #0xD3 - mov.a asr, r0 - - adr r0, LC0 - ldm (r1, r2, r3, r5, r6, r7, r8), [r0]+ - ldw sp, [r0+], #28 - sub.a r0, r0, r1 @ calculate the delta offset - - /* - * if delta is zero, we are running at the address - * we were linked at. - */ - beq not_relocated - - /* - * We're running at a different address. We need to fix - * up various pointers: - * r5 - zImage base address (_start) - * r7 - GOT start - * r8 - GOT end - */ - add r5, r5, r0 - add r7, r7, r0 - add r8, r8, r0 - - /* - * we need to fix up pointers into the BSS region. - * r2 - BSS start - * r3 - BSS end - * sp - stack pointer - */ - add r2, r2, r0 - add r3, r3, r0 - add sp, sp, r0 - - /* - * Relocate all entries in the GOT table. - * This fixes up the C references. - * r7 - GOT start - * r8 - GOT end - */ -1001: ldw r1, [r7+], #0 - add r1, r1, r0 - stw.w r1, [r7]+, #4 - csub.a r7, r8 - bub 1001b - -not_relocated: - /* - * Clear BSS region. - * r2 - BSS start - * r3 - BSS end - */ - mov r0, #0 -1002: stw.w r0, [r2]+, #4 - csub.a r2, r3 - bub 1002b - - /* - * Turn on the cache. - */ - mov r0, #0 - movc p0.c5, r0, #28 @ cache invalidate all - nop8 - movc p0.c6, r0, #6 @ tlb invalidate all - nop8 - - mov r0, #0x1c @ en icache and wb dcache - movc p0.c1, r0, #0 - nop8 - - /* - * Set up some pointers, for starting decompressing. - */ - - mov r1, sp @ malloc space above stack - add r2, sp, #0x10000 @ 64k max - - /* - * Check to see if we will overwrite ourselves. - * r4 = final kernel address - * r5 = start of this image - * r6 = size of decompressed image - * r2 = end of malloc space (and therefore this image) - * We basically want: - * r4 >= r2 -> OK - * r4 + image length <= r5 -> OK - */ - ldw r4, =KERNEL_IMAGE_START - csub.a r4, r2 - bea wont_overwrite - add r0, r4, r6 - csub.a r0, r5 - beb wont_overwrite - - /* - * If overwrite, just print error message - */ - b __error_overwrite - - /* - * We're not in danger of overwriting ourselves. - * Do this the simple way. - */ -wont_overwrite: - /* - * decompress_kernel: - * r0: output_start - * r1: free_mem_ptr_p - * r2: free_mem_ptr_end_p - */ - mov r0, r4 - b.l decompress_kernel @ C functions - - /* - * Clean and flush the cache to maintain consistency. - */ - mov r0, #0 - movc p0.c5, r0, #14 @ flush dcache - nop8 - movc p0.c5, r0, #20 @ icache invalidate all - nop8 - - /* - * Turn off the Cache and MMU. - */ - mov r0, #0 @ disable i/d cache and MMU - movc p0.c1, r0, #0 - nop8 - - mov r0, #0 @ must be zero - ldw r4, =KERNEL_IMAGE_START - mov pc, r4 @ call kernel - - - .align 2 - .type LC0, #object -LC0: .word LC0 @ r1 - .word __bss_start @ r2 - .word _end @ r3 - .word _start @ r5 - .word _image_size @ r6 - .word _got_start @ r7 - .word _got_end @ r8 - .word decompress_stack_end @ sp - .size LC0, . - LC0 - -print_string: -#ifdef CONFIG_DEBUG_OCD -2001: ldb.w r1, [r0]+, #1 - csub.a r1, #0 - bne 2002f - mov pc, lr -2002: - movc r2, p1.c0, #0 - cand.a r2, #2 - bne 2002b - movc p1.c1, r1, #1 - csub.a r1, #'\n' - cmoveq r1, #'\r' - beq 2002b - b 2001b -#else - mov pc, lr -#endif - -__error_overwrite: - adr r0, str_error - b.l print_string -2001: nop8 - b 2001b -str_error: .asciz "\nError: Kernel address OVERWRITE\n" - .align - - .ltorg - - .align 4 - .section ".stack", "aw", %nobits -decompress_stack: .space 4096 -decompress_stack_end: diff --git a/arch/unicore32/boot/compressed/misc.c b/arch/unicore32/boot/compressed/misc.c deleted file mode 100644 index 450d3355de20..000000000000 --- a/arch/unicore32/boot/compressed/misc.c +++ /dev/null @@ -1,123 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/boot/compressed/misc.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#include <asm/unaligned.h> -#include <mach/uncompress.h> - -/* - * gzip delarations - */ -unsigned char *output_data; -unsigned long output_ptr; - -unsigned int free_mem_ptr; -unsigned int free_mem_end_ptr; - -#define STATIC static -#define STATIC_RW_DATA /* non-static please */ - -/* - * arch-dependent implementations - */ -#ifndef ARCH_HAVE_DECOMP_ERROR -#define arch_decomp_error(x) -#endif - -#ifndef ARCH_HAVE_DECOMP_SETUP -#define arch_decomp_setup() -#endif - -#ifndef ARCH_HAVE_DECOMP_PUTS -#define arch_decomp_puts(p) -#endif - -void *memcpy(void *dest, const void *src, size_t n) -{ - int i = 0; - unsigned char *d = (unsigned char *)dest, *s = (unsigned char *)src; - - for (i = n >> 3; i > 0; i--) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (n & 1 << 2) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - - if (n & 1 << 1) { - *d++ = *s++; - *d++ = *s++; - } - - if (n & 1) - *d++ = *s++; - - return dest; -} - -void error(char *x) -{ - arch_decomp_puts("\n\n"); - arch_decomp_puts(x); - arch_decomp_puts("\n\n -- System halted"); - - arch_decomp_error(x); - - for (;;) - ; /* Halt */ -} - -/* Heap size should be adjusted for different decompress method */ -#ifdef CONFIG_KERNEL_GZIP -#include "../../../../lib/decompress_inflate.c" -#endif - -#ifdef CONFIG_KERNEL_BZIP2 -#include "../../../../lib/decompress_bunzip2.c" -#endif - -#ifdef CONFIG_KERNEL_LZO -#include "../../../../lib/decompress_unlzo.c" -#endif - -#ifdef CONFIG_KERNEL_LZMA -#include "../../../../lib/decompress_unlzma.c" -#endif - -unsigned long decompress_kernel(unsigned long output_start, - unsigned long free_mem_ptr_p, - unsigned long free_mem_ptr_end_p) -{ - unsigned char *tmp; - - output_data = (unsigned char *)output_start; - free_mem_ptr = free_mem_ptr_p; - free_mem_end_ptr = free_mem_ptr_end_p; - - arch_decomp_setup(); - - tmp = (unsigned char *) (((unsigned long)input_data_end) - 4); - output_ptr = get_unaligned_le32(tmp); - - arch_decomp_puts("Uncompressing Linux..."); - __decompress(input_data, input_data_end - input_data, NULL, NULL, - output_data, 0, NULL, error); - arch_decomp_puts(" done, booting the kernel.\n"); - return output_ptr; -} diff --git a/arch/unicore32/boot/compressed/piggy.S.in b/arch/unicore32/boot/compressed/piggy.S.in deleted file mode 100644 index b79704d58026..000000000000 --- a/arch/unicore32/boot/compressed/piggy.S.in +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/unicore32/boot/compressed/piggy.DECOMP_SUFFIX" - .globl input_data_end -input_data_end: diff --git a/arch/unicore32/boot/compressed/vmlinux.lds.S b/arch/unicore32/boot/compressed/vmlinux.lds.S deleted file mode 100644 index edda4ddfa357..000000000000 --- a/arch/unicore32/boot/compressed/vmlinux.lds.S +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore/boot/compressed/vmlinux.lds.in - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -OUTPUT_ARCH(unicore32) -ENTRY(_start) -SECTIONS -{ - /DISCARD/ : { - /* - * Discard any r/w data - this produces a link error if we have any, - * which is required for PIC decompression. Local data generates - * GOTOFF relocations, which prevents it being relocated independently - * of the text/got segments. - */ - *(.data) - } - - . = TEXT_START; - _text = .; - - .text : { - _start = .; - *(.start) - *(.text) - *(.text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata) - *(.rodata.*) - *(.piggydata) - . = ALIGN(4); - } - - _etext = .; - - /* Assume size of decompressed image is 4x the compressed image */ - _image_size = (_etext - _text) * 4; - - _got_start = .; - .got : { *(.got) } - _got_end = .; - .got.plt : { *(.got.plt) } - _edata = .; - - . = BSS_START; - __bss_start = .; - .bss : { *(.bss) } - _end = .; - - .stack : { *(.stack) } - .comment 0 : { *(.comment) } -} - diff --git a/arch/unicore32/configs/defconfig b/arch/unicore32/configs/defconfig deleted file mode 100644 index 360cc9abcdb0..000000000000 --- a/arch/unicore32/configs/defconfig +++ /dev/null @@ -1,214 +0,0 @@ -### General setup -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-unicore32" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_HOTPLUG=y -# Initial RAM filesystem and RAM disk (initramfs/initrd) support -#CONFIG_BLK_DEV_INITRD=y -#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config" - -### Enable loadable module support -CONFIG_MODULES=n -CONFIG_MODULE_UNLOAD=y - -### System Type -CONFIG_ARCH_PUV3=y -# Board Selection -CONFIG_PUV3_NB0916=y -# Processor Features -CONFIG_CPU_DCACHE_LINE_DISABLE=y -CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n - -### Bus support -CONFIG_PCI=y -CONFIG_PCI_LEGACY=n - -### Boot options -# for debug, adding: earlyprintk=ocd,keep initcall_debug -# others support: test_suspend=mem root=/dev/sda -# hibernate support: resume=/dev/sda3 -CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel" -# TODO: mem=512M video=unifb:1024x600-16@75 -# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024 -# ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off -CONFIG_CMDLINE_FORCE=y - -### Power management options -CONFIG_PM=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="/dev/sda3" -CONFIG_CPU_FREQ=n -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y - -### Networking support -CONFIG_NET=y -# Networking options -CONFIG_PACKET=m -CONFIG_UNIX=m -# TCP/IP networking -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IPV6=n -# Wireless -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_MAC80211=m - -### PKUnity SoC Features -CONFIG_USB_WLAN_HED_AQ3=n -CONFIG_USB_CMMB_INNOFIDEI=n -CONFIG_I2C_BATTERY_BQ27200=n -CONFIG_I2C_EEPROM_AT24=n -CONFIG_LCD_BACKLIGHT=n - -CONFIG_PUV3_UMAL=y -CONFIG_PUV3_MUSB=n -CONFIG_PUV3_AC97=n -CONFIG_PUV3_NAND=n -CONFIG_PUV3_MMC=n -CONFIG_PUV3_UART=n - -### Device Drivers -# Memory Technology Device (MTD) support -CONFIG_MTD=m -CONFIG_MTD_UBI=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -# RAM/ROM/Flash chip drivers -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_AMDSTD=m -# Mapping drivers for chip access -CONFIG_MTD_PHYSMAP=m - -# Block devices -CONFIG_BLK_DEV_LOOP=m - -# SCSI device support -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m - -# Serial ATA (prod) and Parallel ATA (experimental) drivers -CONFIG_ATA=y -CONFIG_SATA_VIA=y - -# Network device support -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NETDEV_1000=y -# Wireless LAN -CONFIG_WLAN_80211=n -CONFIG_RT2X00=n -CONFIG_RT73USB=n - -# Input device support -CONFIG_INPUT_EVDEV=m -# Keyboards -CONFIG_KEYBOARD_GPIO=m - -# I2C support -CONFIG_I2C=y -CONFIG_I2C_PUV3=y - -# Hardware Monitoring support -#CONFIG_SENSORS_LM75=m -# Generic Thermal sysfs driver -#CONFIG_THERMAL=y -#CONFIG_THERMAL_HWMON=y - -# Multimedia support -CONFIG_MEDIA_SUPPORT=n -CONFIG_VIDEO_DEV=n -CONFIG_USB_VIDEO_CLASS=n - -# Graphics support -CONFIG_FB=y -CONFIG_FB_PUV3_UNIGFX=y -# Console display driver support -CONFIG_VGA_CONSOLE=n -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# Bootup logo -CONFIG_LOGO=n - -# Sound card support -CONFIG_SOUND=m -# Advanced Linux Sound Architecture -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m - -# USB support -CONFIG_USB_ARCH_HAS_HCD=n -CONFIG_USB=n -CONFIG_USB_PRINTER=n -CONFIG_USB_STORAGE=n -# Inventra Highspeed Dual Role Controller -CONFIG_USB_MUSB_HDRC=n - -# LED Support -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -# LED Triggers -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y - -# Real Time Clock -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PUV3=y - -### File systems -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=y -CONFIG_EXT4_FS=y -CONFIG_FUSE_FS=m -# CD-ROM/DVD Filesystems -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -# DOS/FAT/NT Filesystems -CONFIG_VFAT_FS=m -# Pseudo filesystems -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# Miscellaneous filesystems -CONFIG_MISC_FILESYSTEMS=y -CONFIG_JFFS2_FS=m -CONFIG_UBIFS_FS=m -# Network File Systems -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# Partition Types -CONFIG_PARTITION_ADVANCED=y -CONFIG_MSDOS_PARTITION=y -# Native language support -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m - -### Kernel hacking -CONFIG_FRAME_WARN=8096 -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_PROVE_LOCKING=n -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_LL=y - diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild deleted file mode 100644 index 55026e8240d8..000000000000 --- a/arch/unicore32/include/asm/Kbuild +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -generic-y += extable.h -generic-y += kvm_para.h -generic-y += mcs_spinlock.h -generic-y += parport.h -generic-y += syscalls.h -generic-y += user.h diff --git a/arch/unicore32/include/asm/assembler.h b/arch/unicore32/include/asm/assembler.h deleted file mode 100644 index 3de843d92850..000000000000 --- a/arch/unicore32/include/asm/assembler.h +++ /dev/null @@ -1,128 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/assembler.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Do not include any C declarations in this file - it is included by - * assembler source. - */ -#ifndef __ASSEMBLY__ -#error "Only include this from assembly code" -#endif - -#include <asm/ptrace.h> - -/* - * Little Endian independent macros for shifting bytes within registers. - */ -#define pull >> -#define push << -#define get_byte_0 << #0 -#define get_byte_1 >> #8 -#define get_byte_2 >> #16 -#define get_byte_3 >> #24 -#define put_byte_0 << #0 -#define put_byte_1 << #8 -#define put_byte_2 << #16 -#define put_byte_3 << #24 - -#define cadd cmpadd -#define cand cmpand -#define csub cmpsub -#define cxor cmpxor - -/* - * Enable and disable interrupts - */ - .macro disable_irq, temp - mov \temp, asr - andn \temp, \temp, #0xFF - or \temp, \temp, #PSR_I_BIT | PRIV_MODE - mov.a asr, \temp - .endm - - .macro enable_irq, temp - mov \temp, asr - andn \temp, \temp, #0xFF - or \temp, \temp, #PRIV_MODE - mov.a asr, \temp - .endm - -#define USER(x...) \ -9999: x; \ - .pushsection __ex_table, "a"; \ - .align 3; \ - .long 9999b, 9001f; \ - .popsection - - .macro notcond, cond, nexti = .+8 - .ifc \cond, eq - bne \nexti - .else; .ifc \cond, ne - beq \nexti - .else; .ifc \cond, ea - bub \nexti - .else; .ifc \cond, ub - bea \nexti - .else; .ifc \cond, fs - bns \nexti - .else; .ifc \cond, ns - bfs \nexti - .else; .ifc \cond, fv - bnv \nexti - .else; .ifc \cond, nv - bfv \nexti - .else; .ifc \cond, ua - beb \nexti - .else; .ifc \cond, eb - bua \nexti - .else; .ifc \cond, eg - bsl \nexti - .else; .ifc \cond, sl - beg \nexti - .else; .ifc \cond, sg - bel \nexti - .else; .ifc \cond, el - bsg \nexti - .else; .ifnc \cond, al - .error "Unknown cond in notcond macro argument" - .endif; .endif; .endif; .endif; .endif; .endif; .endif - .endif; .endif; .endif; .endif; .endif; .endif; .endif - .endif - .endm - - .macro usracc, instr, reg, ptr, inc, cond, rept, abort - .rept \rept - notcond \cond, .+8 -9999 : - .if \inc == 1 - \instr\()b.u \reg, [\ptr], #\inc - .elseif \inc == 4 - \instr\()w.u \reg, [\ptr], #\inc - .else - .error "Unsupported inc macro argument" - .endif - - .pushsection __ex_table, "a" - .align 3 - .long 9999b, \abort - .popsection - .endr - .endm - - .macro strusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f - usracc st, \reg, \ptr, \inc, \cond, \rept, \abort - .endm - - .macro ldrusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f - usracc ld, \reg, \ptr, \inc, \cond, \rept, \abort - .endm - - .macro nop8 - .rept 8 - nop - .endr - .endm diff --git a/arch/unicore32/include/asm/barrier.h b/arch/unicore32/include/asm/barrier.h deleted file mode 100644 index efb81de87507..000000000000 --- a/arch/unicore32/include/asm/barrier.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Memory barrier implementations for PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2012 GUAN Xue-tao - */ -#ifndef __UNICORE_BARRIER_H__ -#define __UNICORE_BARRIER_H__ - -#define isb() __asm__ __volatile__ ("" : : : "memory") -#define dsb() __asm__ __volatile__ ("" : : : "memory") -#define dmb() __asm__ __volatile__ ("" : : : "memory") - -#include <asm-generic/barrier.h> - -#endif /* __UNICORE_BARRIER_H__ */ diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h deleted file mode 100644 index deeb2163f35e..000000000000 --- a/arch/unicore32/include/asm/bitops.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/bitops.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_BITOPS_H__ -#define __UNICORE_BITOPS_H__ - -#define _ASM_GENERIC_BITOPS_FLS_H_ -#define _ASM_GENERIC_BITOPS___FLS_H_ -#define _ASM_GENERIC_BITOPS_FFS_H_ -#define _ASM_GENERIC_BITOPS___FFS_H_ -/* - * On UNICORE, those functions can be implemented around - * the cntlz instruction for much better code efficiency. - */ - -static inline int fls(unsigned int x) -{ - int ret; - - asm("cntlz\t%0, %1" : "=r" (ret) : "r" (x) : "cc"); - ret = 32 - ret; - - return ret; -} - -#define __fls(x) (fls(x) - 1) -#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) -#define __ffs(x) (ffs(x) - 1) - -#include <asm-generic/bitops.h> - -/* following definitions: to avoid using codes in lib/find_*.c */ -#define find_next_bit find_next_bit -#define find_next_zero_bit find_next_zero_bit -#define find_first_bit find_first_bit -#define find_first_zero_bit find_first_zero_bit - -#include <asm-generic/bitops/find.h> - -#endif /* __UNICORE_BITOPS_H__ */ diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h deleted file mode 100644 index 99acea84a865..000000000000 --- a/arch/unicore32/include/asm/bug.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Bug handling for PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2012 GUAN Xue-tao - */ -#ifndef __UNICORE_BUG_H__ -#define __UNICORE_BUG_H__ - -#include <asm-generic/bug.h> - -struct pt_regs; -struct siginfo; - -extern void die(const char *msg, struct pt_regs *regs, int err); -extern void uc32_notify_die(const char *str, struct pt_regs *regs, - int sig, int code, void __user *addr, - unsigned long err, unsigned long trap); - -#endif /* __UNICORE_BUG_H__ */ diff --git a/arch/unicore32/include/asm/cache.h b/arch/unicore32/include/asm/cache.h deleted file mode 100644 index 44ecd1f300fe..000000000000 --- a/arch/unicore32/include/asm/cache.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/cache.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_CACHE_H__ -#define __UNICORE_CACHE_H__ - -#define L1_CACHE_SHIFT (5) -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -/* - * Memory returned by kmalloc() may be used for DMA, so we must make - * sure that all such allocations are cache aligned. Otherwise, - * unrelated code may cause parts of the buffer to be read into the - * cache before the transfer is done, causing old data to be seen by - * the CPU. - */ -#define ARCH_DMA_MINALIGN L1_CACHE_BYTES - -#endif diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h deleted file mode 100644 index ff0be92ebc32..000000000000 --- a/arch/unicore32/include/asm/cacheflush.h +++ /dev/null @@ -1,186 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/cacheflush.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_CACHEFLUSH_H__ -#define __UNICORE_CACHEFLUSH_H__ - -#include <linux/mm.h> - -#include <asm/shmparam.h> - -#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) - -/* - * This flag is used to indicate that the page pointed to by a pte is clean - * and does not require cleaning before returning it to the user. - */ -#define PG_dcache_clean PG_arch_1 - -/* - * MM Cache Management - * =================== - * - * The arch/unicore32/mm/cache.S files implement these methods. - * - * Start addresses are inclusive and end addresses are exclusive; - * start addresses should be rounded down, end addresses up. - * - * See Documentation/core-api/cachetlb.rst for more information. - * Please note that the implementation of these, and the required - * effects are cache-type (VIVT/VIPT/PIPT) specific. - * - * flush_icache_all() - * - * Unconditionally clean and invalidate the entire icache. - * Currently only needed for cache-v6.S and cache-v7.S, see - * __flush_icache_all for the generic implementation. - * - * flush_kern_all() - * - * Unconditionally clean and invalidate the entire cache. - * - * flush_user_all() - * - * Clean and invalidate all user space cache entries - * before a change of page tables. - * - * flush_user_range(start, end, flags) - * - * Clean and invalidate a range of cache entries in the - * specified address space before a change of page tables. - * - start - user start address (inclusive, page aligned) - * - end - user end address (exclusive, page aligned) - * - flags - vma->vm_flags field - * - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start, end. If you have non-snooping - * Harvard caches, you need to implement this function. - * - start - virtual start address - * - end - virtual end address - * - * coherent_user_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start, end. If you have non-snooping - * Harvard caches, you need to implement this function. - * - start - virtual start address - * - end - virtual end address - * - * flush_kern_dcache_area(kaddr, size) - * - * Ensure that the data held in page is written back. - * - kaddr - page address - * - size - region size - * - * DMA Cache Coherency - * =================== - * - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - start - virtual start address - * - end - virtual end address - */ - -extern void __cpuc_flush_icache_all(void); -extern void __cpuc_flush_kern_all(void); -extern void __cpuc_flush_user_all(void); -extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); -extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); -extern void __cpuc_coherent_user_range(unsigned long, unsigned long); -extern void __cpuc_flush_dcache_area(void *, size_t); -extern void __cpuc_flush_kern_dcache_area(void *addr, size_t size); - -/* - * Copy user data from/to a page which is mapped into a different - * processes address space. Really, we want to allow our "user - * space" model to handle this. - */ -extern void copy_to_user_page(struct vm_area_struct *, struct page *, - unsigned long, void *, const void *, unsigned long); -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - } while (0) - -/* - * Convert calls to our calling convention. - */ -/* Invalidate I-cache */ -static inline void __flush_icache_all(void) -{ - asm("movc p0.c5, %0, #20;\n" - "nop; nop; nop; nop; nop; nop; nop; nop\n" - : - : "r" (0)); -} - -#define flush_cache_all() __cpuc_flush_kern_all() - -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, - unsigned long user_addr, unsigned long pfn); - -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -/* - * Perform necessary cache operations to ensure that data previously - * stored within this range of addresses can be executed by the CPU. - */ -#define flush_icache_range(s, e) __cpuc_coherent_kern_range(s, e) - -/* - * Perform necessary cache operations to ensure that the TLB will - * see data written in the specified area. - */ -#define clean_dcache_area(start, size) cpu_dcache_clean_area(start, size) - -/* - * flush_dcache_page is used when the kernel has written to the page - * cache page at virtual address page->virtual. - * - * If this page isn't mapped (ie, page_mapping == NULL), or it might - * have userspace mappings, then we _must_ always clean + invalidate - * the dcache entries associated with the kernel mapping. - * - * Otherwise we can defer the operation, and clean the cache when we are - * about to change to user space. This is the same method as used on SPARC64. - * See update_mmu_cache for the user space part. - */ -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 -extern void flush_dcache_page(struct page *); - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -/* - * We don't appear to need to do anything here. In fact, if we did, we'd - * duplicate cache flushing elsewhere performed by flush_dcache_page(). - */ -#define flush_icache_page(vma, page) do { } while (0) - -/* - * flush_cache_vmap() is used when creating mappings (eg, via vmap, - * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT - * caches, since the direct-mappings of these pages may contain cached - * data, we need to do a full cache flush to ensure that writebacks - * don't corrupt data placed into these pages via the new mappings. - */ -static inline void flush_cache_vmap(unsigned long start, unsigned long end) -{ -} - -static inline void flush_cache_vunmap(unsigned long start, unsigned long end) -{ -} - -#endif diff --git a/arch/unicore32/include/asm/checksum.h b/arch/unicore32/include/asm/checksum.h deleted file mode 100644 index e774ca268c15..000000000000 --- a/arch/unicore32/include/asm/checksum.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/checksum.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * IP checksum routines - */ -#ifndef __UNICORE_CHECKSUM_H__ -#define __UNICORE_CHECKSUM_H__ - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, - __u8 proto, __wsum sum) -{ - __asm__( - "add.a %0, %1, %2\n" - "addc.a %0, %0, %3\n" - "addc.a %0, %0, %4 << #8\n" - "addc.a %0, %0, %5\n" - "addc %0, %0, #0\n" - : "=&r"(sum) - : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) - : "cc"); - return sum; -} -#define csum_tcpudp_nofold csum_tcpudp_nofold - -#include <asm-generic/checksum.h> - -#endif diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h deleted file mode 100644 index 87f960a2e4f0..000000000000 --- a/arch/unicore32/include/asm/cmpxchg.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Atomics xchg/cmpxchg for PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2012 GUAN Xue-tao - */ -#ifndef __UNICORE_CMPXCHG_H__ -#define __UNICORE_CMPXCHG_H__ - -/* - * Generate a link failure on undefined symbol if the pointer points to a value - * of unsupported size. - */ -extern void __xchg_bad_pointer(void); - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, - int size) -{ - unsigned long ret; - - switch (size) { - case 1: - asm volatile("swapb %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - case 4: - asm volatile("swapw %0, %1, [%2]" - : "=&r" (ret) - : "r" (x), "r" (ptr) - : "memory", "cc"); - break; - default: - __xchg_bad_pointer(); - } - - return ret; -} - -#define xchg(ptr, x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) - -#include <asm-generic/cmpxchg-local.h> - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \ - (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) \ - __cmpxchg64_local_generic((ptr), (o), (n)) - -#include <asm-generic/cmpxchg.h> - -#endif /* __UNICORE_CMPXCHG_H__ */ diff --git a/arch/unicore32/include/asm/cpu-single.h b/arch/unicore32/include/asm/cpu-single.h deleted file mode 100644 index 1b419d697fd1..000000000000 --- a/arch/unicore32/include/asm/cpu-single.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/cpu-single.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_CPU_SINGLE_H__ -#define __UNICORE_CPU_SINGLE_H__ - -#include <asm/page.h> -#include <asm/memory.h> - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#define cpu_switch_mm(pgd, mm) cpu_do_switch_mm(virt_to_phys(pgd), mm) - -#define cpu_get_pgd() \ - ({ \ - unsigned long pg; \ - __asm__("movc %0, p0.c2, #0" \ - : "=r" (pg) : : "cc"); \ - pg &= ~0x0fff; \ - (pgd_t *)phys_to_virt(pg); \ - }) - -struct mm_struct; - -/* declare all the functions as extern */ -extern void cpu_proc_fin(void); -extern int cpu_do_idle(void); -extern void cpu_dcache_clean_area(void *, int); -extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte(pte_t *ptep, pte_t pte); -extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -#endif /* __UNICORE_CPU_SINGLE_H__ */ diff --git a/arch/unicore32/include/asm/cputype.h b/arch/unicore32/include/asm/cputype.h deleted file mode 100644 index 08a47e3bdbcc..000000000000 --- a/arch/unicore32/include/asm/cputype.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/cputype.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_CPUTYPE_H__ -#define __UNICORE_CPUTYPE_H__ - -#include <linux/stringify.h> - -#define CPUID_CPUID 0 -#define CPUID_CACHETYPE 1 - -#define read_cpuid(reg) \ - ({ \ - unsigned int __val; \ - asm("movc %0, p0.c0, #" __stringify(reg) \ - : "=r" (__val) \ - : \ - : "cc"); \ - __val; \ - }) - -#define uc32_cpuid read_cpuid(CPUID_CPUID) -#define uc32_cachetype read_cpuid(CPUID_CACHETYPE) - -#endif diff --git a/arch/unicore32/include/asm/delay.h b/arch/unicore32/include/asm/delay.h deleted file mode 100644 index 934193edfa66..000000000000 --- a/arch/unicore32/include/asm/delay.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/delay.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Delay routines, using a pre-computed "loops_per_second" value. - */ -#ifndef __UNICORE_DELAY_H__ -#define __UNICORE_DELAY_H__ - -#include <asm/param.h> /* HZ */ - -extern void __delay(int loops); - -/* - * This function intentionally does not exist; if you see references to - * it, it means that you're calling udelay() with an out of range value. - * - * With currently imposed limits, this means that we support a max delay - * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 - */ -extern void __bad_udelay(void); - -/* - * division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ -extern void __udelay(unsigned long usecs); -extern void __const_udelay(unsigned long); - -#define MAX_UDELAY_MS 2 - -#define udelay(n) \ - (__builtin_constant_p(n) ? \ - ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \ - __const_udelay((n) * ((2199023U*HZ)>>11))) : \ - __udelay(n)) - -#endif /* __UNICORE_DELAY_H__ */ - diff --git a/arch/unicore32/include/asm/dma.h b/arch/unicore32/include/asm/dma.h deleted file mode 100644 index 1326310b21e6..000000000000 --- a/arch/unicore32/include/asm/dma.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/dma.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_DMA_H__ -#define __UNICORE_DMA_H__ - -#include <asm/memory.h> -#include <asm-generic/dma.h> - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#endif - -#endif /* __UNICORE_DMA_H__ */ diff --git a/arch/unicore32/include/asm/elf.h b/arch/unicore32/include/asm/elf.h deleted file mode 100644 index a464ed5f05d4..000000000000 --- a/arch/unicore32/include/asm/elf.h +++ /dev/null @@ -1,90 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/elf.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_ELF_H__ -#define __UNICORE_ELF_H__ - -#include <asm/hwcap.h> - -/* - * ELF register definitions.. - */ -#include <asm/ptrace.h> -#include <linux/elf-em.h> - -typedef unsigned long elf_greg_t; -typedef unsigned long elf_freg_t[3]; - -#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct fp_state elf_fpregset_t; - -#define R_UNICORE_NONE 0 -#define R_UNICORE_PC24 1 -#define R_UNICORE_ABS32 2 -#define R_UNICORE_CALL 28 -#define R_UNICORE_JUMP24 29 - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2LSB -#define ELF_ARCH EM_UNICORE - -/* - * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - * - */ -#define ELF_PLATFORM_SIZE 8 -#define ELF_PLATFORM (elf_platform) - -extern char elf_platform[]; - -struct elf32_hdr; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -extern int elf_check_arch(const struct elf32_hdr *); -#define elf_check_arch elf_check_arch - -struct task_struct; -int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); -#define ELF_CORE_COPY_TASK_REGS dump_task_regs - -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -/* When the program starts, a1 contains a pointer to a function to be - registered with atexit, as per the SVR4 ABI. A value of 0 means we - have no such handler. */ -#define ELF_PLAT_INIT(_r, load_addr) {(_r)->UCreg_00 = 0; } - -extern void elf_set_personality(const struct elf32_hdr *); -#define SET_PERSONALITY(ex) elf_set_personality(&(ex)) - -struct mm_struct; -extern unsigned long arch_randomize_brk(struct mm_struct *mm); -#define arch_randomize_brk arch_randomize_brk - -extern int vectors_user_mapping(void); -#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping() -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES - -#endif diff --git a/arch/unicore32/include/asm/fpstate.h b/arch/unicore32/include/asm/fpstate.h deleted file mode 100644 index 5811293e7a7e..000000000000 --- a/arch/unicore32/include/asm/fpstate.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/fpstate.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_FPSTATE_H__ -#define __UNICORE_FPSTATE_H__ - -#ifndef __ASSEMBLY__ - -#define FP_REGS_NUMBER 33 - -struct fp_state { - unsigned int regs[FP_REGS_NUMBER]; -} __attribute__((aligned(8))); - -#endif - -#endif diff --git a/arch/unicore32/include/asm/fpu-ucf64.h b/arch/unicore32/include/asm/fpu-ucf64.h deleted file mode 100644 index 7a0c8a9e05d4..000000000000 --- a/arch/unicore32/include/asm/fpu-ucf64.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/fpu-ucf64.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ -#define FPSCR s31 - -/* FPSCR bits */ -#define FPSCR_DEFAULT_NAN (1<<25) - -#define FPSCR_CMPINSTR_BIT (1<<31) - -#define FPSCR_CON (1<<29) -#define FPSCR_TRAP (1<<27) - -/* RND mode */ -#define FPSCR_ROUND_NEAREST (0<<0) -#define FPSCR_ROUND_PLUSINF (2<<0) -#define FPSCR_ROUND_MINUSINF (3<<0) -#define FPSCR_ROUND_TOZERO (1<<0) -#define FPSCR_RMODE_BIT (0) -#define FPSCR_RMODE_MASK (7 << FPSCR_RMODE_BIT) - -/* trap enable */ -#define FPSCR_IOE (1<<16) -#define FPSCR_OFE (1<<14) -#define FPSCR_UFE (1<<13) -#define FPSCR_IXE (1<<12) -#define FPSCR_HIE (1<<11) -#define FPSCR_NDE (1<<10) /* non denomal */ - -/* flags */ -#define FPSCR_IDC (1<<24) -#define FPSCR_HIC (1<<23) -#define FPSCR_IXC (1<<22) -#define FPSCR_OFC (1<<21) -#define FPSCR_UFC (1<<20) -#define FPSCR_IOC (1<<19) - -/* stick bits */ -#define FPSCR_IOS (1<<9) -#define FPSCR_OFS (1<<7) -#define FPSCR_UFS (1<<6) -#define FPSCR_IXS (1<<5) -#define FPSCR_HIS (1<<4) -#define FPSCR_NDS (1<<3) /*non denomal */ diff --git a/arch/unicore32/include/asm/gpio.h b/arch/unicore32/include/asm/gpio.h deleted file mode 100644 index dfad04ca0a65..000000000000 --- a/arch/unicore32/include/asm/gpio.h +++ /dev/null @@ -1,101 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/gpio.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_GPIO_H__ -#define __UNICORE_GPIO_H__ - -#include <linux/io.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <asm-generic/gpio.h> - -#define GPI_OTP_INT 0 -#define GPI_PCI_INTA 1 -#define GPI_PCI_INTB 2 -#define GPI_PCI_INTC 3 -#define GPI_PCI_INTD 4 -#define GPI_BAT_DET 5 -#define GPI_SD_CD 6 -#define GPI_SOFF_REQ 7 -#define GPI_SD_WP 8 -#define GPI_LCD_CASE_OFF 9 -#define GPO_WIFI_EN 10 -#define GPO_HDD_LED 11 -#define GPO_VGA_EN 12 -#define GPO_LCD_EN 13 -#define GPO_LED_DATA 14 -#define GPO_LED_CLK 15 -#define GPO_CAM_PWR_EN 16 -#define GPO_LCD_VCC_EN 17 -#define GPO_SOFT_OFF 18 -#define GPO_BT_EN 19 -#define GPO_FAN_ON 20 -#define GPO_SPKR 21 -#define GPO_SET_V1 23 -#define GPO_SET_V2 24 -#define GPO_CPU_HEALTH 25 -#define GPO_LAN_SEL 26 - -#ifdef CONFIG_PUV3_NB0916 -#define GPI_BTN_TOUCH 14 -#define GPIO_IN 0x000043ff /* 1 for input */ -#define GPIO_OUT 0x0fffbc00 /* 1 for output */ -#endif /* CONFIG_PUV3_NB0916 */ - -#ifdef CONFIG_PUV3_SMW0919 -#define GPIO_IN 0x000003ff /* 1 for input */ -#define GPIO_OUT 0x0ffffc00 /* 1 for output */ -#endif /* CONFIG_PUV3_SMW0919 */ - -#ifdef CONFIG_PUV3_DB0913 -#define GPIO_IN 0x000001df /* 1 for input */ -#define GPIO_OUT 0x03fee800 /* 1 for output */ -#endif /* CONFIG_PUV3_DB0913 */ - -#define GPIO_DIR (~((GPIO_IN) | 0xf0000000)) - /* 0 input, 1 output */ - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) - return readl(GPIO_GPLR) & GPIO_GPIO(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) - if (value) - writel(GPIO_GPIO(gpio), GPIO_GPSR); - else - writel(GPIO_GPIO(gpio), GPIO_GPCR); - else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -static inline unsigned gpio_to_irq(unsigned gpio) -{ - if ((gpio < IRQ_GPIOHIGH) && (FIELD(1, 1, gpio) & readl(GPIO_GPIR))) - return IRQ_GPIOLOW0 + gpio; - else - return IRQ_GPIO0 + gpio; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIOHIGH) - return irq - IRQ_GPIOLOW0; - else - return irq - IRQ_GPIO0; -} - -#endif /* __UNICORE_GPIO_H__ */ diff --git a/arch/unicore32/include/asm/hwcap.h b/arch/unicore32/include/asm/hwcap.h deleted file mode 100644 index 2e15ffbe8391..000000000000 --- a/arch/unicore32/include/asm/hwcap.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/hwcap.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_HWCAP_H__ -#define __UNICORE_HWCAP_H__ - -/* - * HWCAP flags - */ -#define HWCAP_MSP 1 -#define HWCAP_UNICORE16 2 -#define HWCAP_CMOV 4 -#define HWCAP_UNICORE_F64 8 -#define HWCAP_TLS 0x80 - -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) -/* - * This yields a mask that user programs can use to figure out what - * instruction set this cpu supports. - */ -#define ELF_HWCAP (HWCAP_CMOV | HWCAP_UNICORE_F64) -#endif - -#endif diff --git a/arch/unicore32/include/asm/hwdef-copro.h b/arch/unicore32/include/asm/hwdef-copro.h deleted file mode 100644 index 2db8cf864e43..000000000000 --- a/arch/unicore32/include/asm/hwdef-copro.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Co-processor register definitions for PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2012 GUAN Xue-tao - */ -#ifndef __UNICORE_HWDEF_COPRO_H__ -#define __UNICORE_HWDEF_COPRO_H__ - -/* - * Control Register bits (CP#0 CR1) - */ -#define CR_M (1 << 0) /* MMU enable */ -#define CR_A (1 << 1) /* Alignment abort enable */ -#define CR_D (1 << 2) /* Dcache enable */ -#define CR_I (1 << 3) /* Icache enable */ -#define CR_B (1 << 4) /* Dcache write mechanism: write back */ -#define CR_T (1 << 5) /* Burst enable */ -#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ - -#ifndef __ASSEMBLY__ - -#define vectors_high() (cr_alignment & CR_V) - -extern unsigned long cr_no_alignment; /* defined in entry.S */ -extern unsigned long cr_alignment; /* defined in entry.S */ - -static inline unsigned int get_cr(void) -{ - unsigned int val; - asm("movc %0, p0.c1, #0" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_cr(unsigned int val) -{ - asm volatile("movc p0.c1, %0, #0" : : "r" (val) : "cc"); - isb(); -} - -extern void adjust_cr(unsigned long mask, unsigned long set); - -#endif /* __ASSEMBLY__ */ - -#endif /* __UNICORE_HWDEF_COPRO_H__ */ diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h deleted file mode 100644 index bd4e7c332f85..000000000000 --- a/arch/unicore32/include/asm/io.h +++ /dev/null @@ -1,69 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/io.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_IO_H__ -#define __UNICORE_IO_H__ - -#ifdef __KERNEL__ - -#include <asm/byteorder.h> -#include <asm/memory.h> - -#define PCI_IOBASE PKUNITY_PCILIO_BASE -#include <asm-generic/io.h> - -/* - * __uc32_ioremap takes CPU physical address. - */ -extern void __iomem *__uc32_ioremap(unsigned long, size_t); -extern void __uc32_iounmap(volatile void __iomem *addr); - -/* - * ioremap and friends. - * - * ioremap takes a PCI memory address, as specified in - * Documentation/driver-api/io-mapping.rst. - * - */ -#define ioremap(cookie, size) __uc32_ioremap(cookie, size) -#define iounmap(cookie) __uc32_iounmap(cookie) - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -#define HAVE_ARCH_PIO_SIZE -#define PIO_OFFSET (unsigned int)(PCI_IOBASE) -#define PIO_MASK (unsigned int)(IO_SPACE_LIMIT) -#define PIO_RESERVED (PIO_OFFSET + PIO_MASK + 1) - -#ifdef CONFIG_STRICT_DEVMEM - -#include <linux/ioport.h> -#include <linux/mm.h> - -/* - * devmem_is_allowed() checks to see if /dev/mem access to a certain - * address is valid. The argument is a physical page number. - * We mimic x86 here by disallowing access to system RAM as well as - * device-exclusive MMIO regions. This effectively disable read()/write() - * on /dev/mem. - */ -static inline int devmem_is_allowed(unsigned long pfn) -{ - if (iomem_is_exclusive(pfn << PAGE_SHIFT)) - return 0; - if (!page_is_ram(pfn)) - return 1; - return 0; -} - -#endif /* CONFIG_STRICT_DEVMEM */ - -#endif /* __KERNEL__ */ -#endif /* __UNICORE_IO_H__ */ diff --git a/arch/unicore32/include/asm/irq.h b/arch/unicore32/include/asm/irq.h deleted file mode 100644 index 3f7f07c0338c..000000000000 --- a/arch/unicore32/include/asm/irq.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/irq.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_IRQ_H__ -#define __UNICORE_IRQ_H__ - -#include <asm-generic/irq.h> - -#define IRQ_GPIOLOW0 0x00 -#define IRQ_GPIOLOW1 0x01 -#define IRQ_GPIOLOW2 0x02 -#define IRQ_GPIOLOW3 0x03 -#define IRQ_GPIOLOW4 0x04 -#define IRQ_GPIOLOW5 0x05 -#define IRQ_GPIOLOW6 0x06 -#define IRQ_GPIOLOW7 0x07 -#define IRQ_GPIOHIGH 0x08 -#define IRQ_USB 0x09 -#define IRQ_SDC 0x0a -#define IRQ_AC97 0x0b -#define IRQ_SATA 0x0c -#define IRQ_MME 0x0d -#define IRQ_PCI_BRIDGE 0x0e -#define IRQ_DDR 0x0f -#define IRQ_SPI 0x10 -#define IRQ_UNIGFX 0x11 -#define IRQ_I2C 0x11 -#define IRQ_UART1 0x12 -#define IRQ_UART0 0x13 -#define IRQ_UMAL 0x14 -#define IRQ_NAND 0x15 -#define IRQ_PS2_KBD 0x16 -#define IRQ_PS2_AUX 0x17 -#define IRQ_DMA 0x18 -#define IRQ_DMAERR 0x19 -#define IRQ_TIMER0 0x1a -#define IRQ_TIMER1 0x1b -#define IRQ_TIMER2 0x1c -#define IRQ_TIMER3 0x1d -#define IRQ_RTC 0x1e -#define IRQ_RTCAlarm 0x1f - -#define IRQ_GPIO0 0x20 -#define IRQ_GPIO1 0x21 -#define IRQ_GPIO2 0x22 -#define IRQ_GPIO3 0x23 -#define IRQ_GPIO4 0x24 -#define IRQ_GPIO5 0x25 -#define IRQ_GPIO6 0x26 -#define IRQ_GPIO7 0x27 -#define IRQ_GPIO8 0x28 -#define IRQ_GPIO9 0x29 -#define IRQ_GPIO10 0x2a -#define IRQ_GPIO11 0x2b -#define IRQ_GPIO12 0x2c -#define IRQ_GPIO13 0x2d -#define IRQ_GPIO14 0x2e -#define IRQ_GPIO15 0x2f -#define IRQ_GPIO16 0x30 -#define IRQ_GPIO17 0x31 -#define IRQ_GPIO18 0x32 -#define IRQ_GPIO19 0x33 -#define IRQ_GPIO20 0x34 -#define IRQ_GPIO21 0x35 -#define IRQ_GPIO22 0x36 -#define IRQ_GPIO23 0x37 -#define IRQ_GPIO24 0x38 -#define IRQ_GPIO25 0x39 -#define IRQ_GPIO26 0x3a -#define IRQ_GPIO27 0x3b - -#ifdef CONFIG_ARCH_FPGA -#define IRQ_PCIINTA IRQ_GPIOLOW2 -#define IRQ_PCIINTB IRQ_GPIOLOW1 -#define IRQ_PCIINTC IRQ_GPIOLOW0 -#define IRQ_PCIINTD IRQ_GPIOLOW6 -#endif - -#if defined(CONFIG_PUV3_DB0913) || defined(CONFIG_PUV3_NB0916) \ - || defined(CONFIG_PUV3_SMW0919) -#define IRQ_PCIINTA IRQ_GPIOLOW1 -#define IRQ_PCIINTB IRQ_GPIOLOW2 -#define IRQ_PCIINTC IRQ_GPIOLOW3 -#define IRQ_PCIINTD IRQ_GPIOLOW4 -#endif - -#define IRQ_SD_CD IRQ_GPIO6 /* falling or rising trigger */ - -#ifndef __ASSEMBLY__ -struct pt_regs; - -extern void asm_do_IRQ(unsigned int, struct pt_regs *); - -#endif - -#endif - diff --git a/arch/unicore32/include/asm/irqflags.h b/arch/unicore32/include/asm/irqflags.h deleted file mode 100644 index f64c82e3eae6..000000000000 --- a/arch/unicore32/include/asm/irqflags.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/irqflags.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_IRQFLAGS_H__ -#define __UNICORE_IRQFLAGS_H__ - -#ifdef __KERNEL__ - -#include <asm/ptrace.h> - -#define ARCH_IRQ_DISABLED (PRIV_MODE | PSR_I_BIT) -#define ARCH_IRQ_ENABLED (PRIV_MODE) - -/* - * Save the current interrupt enable state. - */ -static inline unsigned long arch_local_save_flags(void) -{ - unsigned long temp; - - asm volatile("mov %0, asr" : "=r" (temp) : : "memory", "cc"); - - return temp & PSR_c; -} - -/* - * restore saved IRQ state - */ -static inline void arch_local_irq_restore(unsigned long flags) -{ - unsigned long temp; - - asm volatile( - "mov %0, asr\n" - "mov.a asr, %1\n" - "mov.f asr, %0" - : "=&r" (temp) - : "r" (flags) - : "memory", "cc"); -} - -#include <asm-generic/irqflags.h> - -#endif -#endif diff --git a/arch/unicore32/include/asm/linkage.h b/arch/unicore32/include/asm/linkage.h deleted file mode 100644 index 8e341ba7bc4a..000000000000 --- a/arch/unicore32/include/asm/linkage.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/linkage.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_LINKAGE_H__ -#define __UNICORE_LINKAGE_H__ - -#define __ALIGN .align 0 -#define __ALIGN_STR ".align 0" - -#define ENDPROC(name) \ - .type name, %function; \ - END(name) - -#endif diff --git a/arch/unicore32/include/asm/memblock.h b/arch/unicore32/include/asm/memblock.h deleted file mode 100644 index eb56a6ddce83..000000000000 --- a/arch/unicore32/include/asm/memblock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/memblock.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_MEMBLOCK_H__ -#define __UNICORE_MEMBLOCK_H__ - -/* - * Memory map description - */ -# define NR_BANKS 8 - -struct membank { - unsigned long start; - unsigned long size; - unsigned int highmem; -}; - -struct meminfo { - int nr_banks; - struct membank bank[NR_BANKS]; -}; - -extern struct meminfo meminfo; - -#define for_each_bank(iter, mi) \ - for (iter = 0; iter < (mi)->nr_banks; iter++) - -#define bank_pfn_start(bank) __phys_to_pfn((bank)->start) -#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) -#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT) -#define bank_phys_start(bank) ((bank)->start) -#define bank_phys_end(bank) ((bank)->start + (bank)->size) -#define bank_phys_size(bank) ((bank)->size) - -extern void uc32_memblock_init(struct meminfo *); - -#endif diff --git a/arch/unicore32/include/asm/memory.h b/arch/unicore32/include/asm/memory.h deleted file mode 100644 index 66285178dd9b..000000000000 --- a/arch/unicore32/include/asm/memory.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/memory.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Note: this file should not be included by non-asm/.h files - */ -#ifndef __UNICORE_MEMORY_H__ -#define __UNICORE_MEMORY_H__ - -#include <linux/compiler.h> -#include <linux/const.h> -#include <linux/sizes.h> -#include <mach/memory.h> - -/* - * PAGE_OFFSET - the virtual address of the start of the kernel image - * TASK_SIZE - the maximum size of a user space task. - * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area - */ -#define PAGE_OFFSET UL(0xC0000000) -#define TASK_SIZE (PAGE_OFFSET - UL(0x41000000)) -#define TASK_UNMAPPED_BASE (PAGE_OFFSET / 3) - -/* - * The module space lives between the addresses given by TASK_SIZE - * and PAGE_OFFSET - it must be within 32MB of the kernel text. - */ -#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024) -#if TASK_SIZE > MODULES_VADDR -#error Top of user space clashes with start of module space -#endif - -#define MODULES_END (PAGE_OFFSET) - -/* - * Allow 16MB-aligned ioremap pages - */ -#define IOREMAP_MAX_ORDER 24 - -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ -#ifndef __virt_to_phys -#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) -#endif - -/* - * Convert a page to/from a physical address - */ -#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page))) -#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) - -#ifndef __ASSEMBLY__ - -#ifndef arch_adjust_zones -#define arch_adjust_zones(max_zone_pfn) do { } while (0) -#endif - -/* - * PFNs are used to describe any physical page; this means - * PFN 0 == physical address 0. - * - * This is the PFN of the first RAM page in the kernel - * direct-mapped view. We assume this is the first page - * of RAM in the mem_map as well. - */ -#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) - -/* - * Drivers should NOT use these either. - */ -#define __pa(x) __virt_to_phys((unsigned long)(x)) -#define __va(x) ((void *)__phys_to_virt((unsigned long)(x))) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -/* - * Conversion between a struct page and a physical address. - * - * page_to_pfn(page) convert a struct page * to a PFN number - * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * - * - * virt_to_page(k) convert a _valid_ virtual address to struct page * - * virt_addr_valid(k) indicates whether a virtual address is valid - */ -#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && \ - (unsigned long)(kaddr) < (unsigned long)high_memory) - -#endif - -#include <asm-generic/memory_model.h> - -#endif diff --git a/arch/unicore32/include/asm/mmu.h b/arch/unicore32/include/asm/mmu.h deleted file mode 100644 index 8ad4e7eae17b..000000000000 --- a/arch/unicore32/include/asm/mmu.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/mmu.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_MMU_H__ -#define __UNICORE_MMU_H__ - -typedef unsigned long mm_context_t; - -#endif diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h deleted file mode 100644 index 388c0c811c68..000000000000 --- a/arch/unicore32/include/asm/mmu_context.h +++ /dev/null @@ -1,98 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/mmu_context.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_MMU_CONTEXT_H__ -#define __UNICORE_MMU_CONTEXT_H__ - -#include <linux/compiler.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/vmacache.h> -#include <linux/io.h> - -#include <asm/cacheflush.h> -#include <asm/cpu-single.h> - -#define init_new_context(tsk, mm) 0 - -#define destroy_context(mm) do { } while (0) - -/* - * This is called when "tsk" is about to enter lazy TLB mode. - * - * mm: describes the currently active mm context - * tsk: task which is entering lazy tlb - * cpu: cpu number which is entering lazy tlb - * - * tsk->mm will be NULL - */ -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* - * This is the actual mm switch as far as the scheduler - * is concerned. No registers are touched. We avoid - * calling the CPU specific function when the mm hasn't - * actually changed. - */ -static inline void -switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - unsigned int cpu = smp_processor_id(); - - if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) - cpu_switch_mm(next->pgd, next); -} - -#define deactivate_mm(tsk, mm) do { } while (0) -#define activate_mm(prev, next) switch_mm(prev, next, NULL) - -/* - * We are inserting a "fake" vma for the user-accessible vector page so - * gdb and friends can get to it through ptrace and /proc/<pid>/mem. - * But we also want to remove it before the generic code gets to see it - * during process exit or the unmapping of it would cause total havoc. - * (the macro is used as remove_vma() is static to mm/mmap.c) - */ -#define arch_exit_mmap(mm) \ -do { \ - struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \ - if (high_vma) { \ - BUG_ON(high_vma->vm_next); /* it should be last */ \ - if (high_vma->vm_prev) \ - high_vma->vm_prev->vm_next = NULL; \ - else \ - mm->mmap = NULL; \ - rb_erase(&high_vma->vm_rb, &mm->mm_rb); \ - vmacache_invalidate(mm); \ - mm->map_count--; \ - remove_vma(high_vma); \ - } \ -} while (0) - -static inline int arch_dup_mmap(struct mm_struct *oldmm, - struct mm_struct *mm) -{ - return 0; -} - -static inline void arch_unmap(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ -} - -static inline bool arch_vma_access_permitted(struct vm_area_struct *vma, - bool write, bool execute, bool foreign) -{ - /* by default, allow everything */ - return true; -} -#endif diff --git a/arch/unicore32/include/asm/page.h b/arch/unicore32/include/asm/page.h deleted file mode 100644 index 96d6bdf180bd..000000000000 --- a/arch/unicore32/include/asm/page.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/page.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_PAGE_H__ -#define __UNICORE_PAGE_H__ - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifndef __ASSEMBLY__ - -struct page; -struct vm_area_struct; - -#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) -extern void copy_page(void *to, const void *from); - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) }) -#define __pgd(x) ((pgd_t) { (x) }) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef unsigned long pte_t; -typedef unsigned long pgd_t; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pgd_val(x) (x) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pgd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ - -typedef struct page *pgtable_t; - -extern int pfn_valid(unsigned long); - -#include <asm/memory.h> - -#endif /* !__ASSEMBLY__ */ - -#include <asm-generic/getorder.h> - -#endif diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h deleted file mode 100644 index 3efa8ee1afce..000000000000 --- a/arch/unicore32/include/asm/pci.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/pci.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_PCI_H__ -#define __UNICORE_PCI_H__ - -#ifdef __KERNEL__ -#include <asm-generic/pci.h> -#include <mach/hardware.h> /* for PCIBIOS_MIN_* */ - -#define HAVE_PCI_MMAP -#define ARCH_GENERIC_PCI_MMAP_RESOURCE - -#endif /* __KERNEL__ */ -#endif diff --git a/arch/unicore32/include/asm/pgalloc.h b/arch/unicore32/include/asm/pgalloc.h deleted file mode 100644 index ba1c9a79993b..000000000000 --- a/arch/unicore32/include/asm/pgalloc.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/pgalloc.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_PGALLOC_H__ -#define __UNICORE_PGALLOC_H__ - -#include <asm/pgtable-hwdef.h> -#include <asm/processor.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> - -#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL -#define __HAVE_ARCH_PTE_ALLOC_ONE -#include <asm-generic/pgalloc.h> - -#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_PRESENT) -#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_PRESENT) - -extern pgd_t *get_pgd_slow(struct mm_struct *mm); -extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd); - -#define pgd_alloc(mm) get_pgd_slow(mm) -#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd) - -/* - * Allocate one PTE table. - */ -static inline pte_t * -pte_alloc_one_kernel(struct mm_struct *mm) -{ - pte_t *pte = __pte_alloc_one_kernel(mm); - - if (pte) - clean_dcache_area(pte, PTRS_PER_PTE * sizeof(pte_t)); - - return pte; -} - -static inline pgtable_t -pte_alloc_one(struct mm_struct *mm) -{ - struct page *pte; - - pte = __pte_alloc_one(mm, GFP_PGTABLE_USER); - if (!pte) - return NULL; - if (!PageHighMem(pte)) - clean_pte_table(page_address(pte)); - return pte; -} - -static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) -{ - set_pmd(pmdp, __pmd(pmdval)); - flush_pmd_entry(pmdp); -} - -/* - * Populate the pmdp entry with a pointer to the pte. This pmd is part - * of the mm address space. - */ -static inline void -pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) -{ - unsigned long pte_ptr = (unsigned long)ptep; - - /* - * The pmd must be loaded with the physical - * address of the PTE table - */ - __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); -} - -static inline void -pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep) -{ - __pmd_populate(pmdp, - page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -#endif diff --git a/arch/unicore32/include/asm/pgtable-hwdef.h b/arch/unicore32/include/asm/pgtable-hwdef.h deleted file mode 100644 index f28b58c61db9..000000000000 --- a/arch/unicore32/include/asm/pgtable-hwdef.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/pgtable-hwdef.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_PGTABLE_HWDEF_H__ -#define __UNICORE_PGTABLE_HWDEF_H__ - -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_TABLE (0 << 0) -/*#define PMD_TYPE_LARGE (1 << 0) */ -#define PMD_TYPE_INVALID (2 << 0) -#define PMD_TYPE_SECT (3 << 0) - -#define PMD_PRESENT (1 << 2) -#define PMD_YOUNG (1 << 3) - -/*#define PMD_SECT_DIRTY (1 << 4) */ -#define PMD_SECT_CACHEABLE (1 << 5) -#define PMD_SECT_EXEC (1 << 6) -#define PMD_SECT_WRITE (1 << 7) -#define PMD_SECT_READ (1 << 8) - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_SMALL (0 << 0) -#define PTE_TYPE_MIDDLE (1 << 0) -#define PTE_TYPE_LARGE (2 << 0) -#define PTE_TYPE_INVALID (3 << 0) - -#define PTE_PRESENT (1 << 2) -#define PTE_YOUNG (1 << 3) -#define PTE_DIRTY (1 << 4) -#define PTE_CACHEABLE (1 << 5) -#define PTE_EXEC (1 << 6) -#define PTE_WRITE (1 << 7) -#define PTE_READ (1 << 8) - -#endif diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h deleted file mode 100644 index 97f564c8ecba..000000000000 --- a/arch/unicore32/include/asm/pgtable.h +++ /dev/null @@ -1,267 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/pgtable.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_PGTABLE_H__ -#define __UNICORE_PGTABLE_H__ - -#include <asm-generic/pgtable-nopmd.h> -#include <asm/cpu-single.h> - -#include <asm/memory.h> -#include <asm/pgtable-hwdef.h> - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * Note that platforms may override VMALLOC_START, but they must provide - * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, - * which may not overlap IO space. - */ -#ifndef VMALLOC_START -#define VMALLOC_OFFSET SZ_8M -#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) \ - & ~(VMALLOC_OFFSET-1)) -#define VMALLOC_END (0xff000000UL) -#endif - -#define PTRS_PER_PTE 1024 -#define PTRS_PER_PGD 1024 - -/* - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PGDIR_SHIFT 22 - -#ifndef __ASSEMBLY__ -extern void __pte_error(const char *file, int line, unsigned long val); -extern void __pgd_error(const char *file, int line, unsigned long val); - -#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) -#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) -#endif /* !__ASSEMBLY__ */ - -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * This is the lowest virtual address we can permit any user space - * mapping to be mapped at. This is particularly important for - * non-high vector CPUs. - */ -#define FIRST_USER_ADDRESS PAGE_SIZE - -#define FIRST_USER_PGD_NR 1 -#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 22 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -#ifndef __ASSEMBLY__ - -/* - * The pgprot_* and protection_map entries will be fixed up in runtime - * to include the cachable bits based on memory policy, as well as any - * architecture dependent bits. - */ -#define _PTE_DEFAULT (PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE) - -extern pgprot_t pgprot_user; -extern pgprot_t pgprot_kernel; - -#define PAGE_NONE pgprot_user -#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user | PTE_READ \ - | PTE_WRITE)) -#define PAGE_SHARED_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \ - | PTE_WRITE \ - | PTE_EXEC)) -#define PAGE_COPY __pgprot(pgprot_val(pgprot_user | PTE_READ) -#define PAGE_COPY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \ - | PTE_EXEC)) -#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user | PTE_READ)) -#define PAGE_READONLY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \ - | PTE_EXEC)) -#define PAGE_KERNEL pgprot_kernel -#define PAGE_KERNEL_EXEC __pgprot(pgprot_val(pgprot_kernel | PTE_EXEC)) - -#define __PAGE_NONE __pgprot(_PTE_DEFAULT) -#define __PAGE_SHARED __pgprot(_PTE_DEFAULT | PTE_READ \ - | PTE_WRITE) -#define __PAGE_SHARED_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \ - | PTE_WRITE \ - | PTE_EXEC) -#define __PAGE_COPY __pgprot(_PTE_DEFAULT | PTE_READ) -#define __PAGE_COPY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \ - | PTE_EXEC) -#define __PAGE_READONLY __pgprot(_PTE_DEFAULT | PTE_READ) -#define __PAGE_READONLY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \ - | PTE_EXEC) - -#endif /* __ASSEMBLY__ */ - -/* - * The table below defines the page protection levels that we insert into our - * Linux page table version. These get translated into the best that the - * architecture can perform. Note that on UniCore hardware: - * 1) We cannot do execute protection - * 2) If we could do execute protection, then read is implied - * 3) write implies read permissions - */ -#define __P000 __PAGE_NONE -#define __P001 __PAGE_READONLY -#define __P010 __PAGE_COPY -#define __P011 __PAGE_COPY -#define __P100 __PAGE_READONLY_EXEC -#define __P101 __PAGE_READONLY_EXEC -#define __P110 __PAGE_COPY_EXEC -#define __P111 __PAGE_COPY_EXEC - -#define __S000 __PAGE_NONE -#define __S001 __PAGE_READONLY -#define __S010 __PAGE_SHARED -#define __S011 __PAGE_SHARED -#define __S100 __PAGE_READONLY_EXEC -#define __S101 __PAGE_READONLY_EXEC -#define __S110 __PAGE_SHARED_EXEC -#define __S111 __PAGE_SHARED_EXEC - -#ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern struct page *empty_zero_page; -#define ZERO_PAGE(vaddr) (empty_zero_page) - -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) (__pte(((pfn) << PAGE_SHIFT) \ - | pgprot_val(prot))) - -#define pte_none(pte) (!pte_val(pte)) -#define pte_clear(mm, addr, ptep) set_pte(ptep, __pte(0)) -#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) - -#define set_pte(ptep, pte) cpu_set_pte(ptep, pte) - -#define set_pte_at(mm, addr, ptep, pteval) \ - do { \ - set_pte(ptep, pteval); \ - } while (0) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_present(pte) (pte_val(pte) & PTE_PRESENT) -#define pte_write(pte) (pte_val(pte) & PTE_WRITE) -#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & PTE_YOUNG) -#define pte_exec(pte) (pte_val(pte) & PTE_EXEC) - -#define PTE_BIT_FUNC(fn, op) \ -static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } - -PTE_BIT_FUNC(wrprotect, &= ~PTE_WRITE); -PTE_BIT_FUNC(mkwrite, |= PTE_WRITE); -PTE_BIT_FUNC(mkclean, &= ~PTE_DIRTY); -PTE_BIT_FUNC(mkdirty, |= PTE_DIRTY); -PTE_BIT_FUNC(mkold, &= ~PTE_YOUNG); -PTE_BIT_FUNC(mkyoung, |= PTE_YOUNG); - -/* - * Mark the prot value as uncacheable. - */ -#define pgprot_noncached(prot) \ - __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE) -#define pgprot_writecombine(prot) \ - __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_present(pmd) (pmd_val(pmd) & PMD_PRESENT) -#define pmd_bad(pmd) (((pmd_val(pmd) & \ - (PMD_PRESENT | PMD_TYPE_MASK)) \ - != (PMD_PRESENT | PMD_TYPE_TABLE))) - -#define set_pmd(pmdpd, pmdval) \ - do { \ - *(pmdpd) = pmdval; \ - } while (0) - -#define pmd_clear(pmdp) \ - do { \ - set_pmd(pmdp, __pmd(0));\ - clean_pmd_entry(pmdp); \ - } while (0) - -#define pmd_page_vaddr(pmd) ((pte_t *)__va(pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - const unsigned long mask = PTE_EXEC | PTE_WRITE | PTE_READ; - pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); - return pte; -} - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -/* - * Encode and decode a swap entry. Swap entries are stored in the Linux - * page tables as follows: - * - * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------> <--- type --> 0 0 0 0 0 - * - * This gives us up to 127 swap files and 32GB per swap file. Note that - * the offset field is always non-zero. - */ -#define __SWP_TYPE_SHIFT 5 -#define __SWP_TYPE_BITS 7 -#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) -#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) - -#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) \ - & __SWP_TYPE_MASK) -#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) -#define __swp_entry(type, offset) ((swp_entry_t) { \ - ((type) << __SWP_TYPE_SHIFT) | \ - ((offset) << __SWP_OFFSET_SHIFT) }) - -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) - -/* - * It is an error for the kernel to have more swap files than we can - * encode in the PTEs. This ensures that we know when MAX_SWAPFILES - * is increased beyond what we presently support. - */ -#define MAX_SWAPFILES_CHECK() \ - BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -/* FIXME: this is not correct */ -#define kern_addr_valid(addr) (1) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __UNICORE_PGTABLE_H__ */ diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h deleted file mode 100644 index 6f01620da3d1..000000000000 --- a/arch/unicore32/include/asm/processor.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/processor.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_PROCESSOR_H__ -#define __UNICORE_PROCESSOR_H__ - -#ifdef __KERNEL__ - -#include <asm/ptrace.h> -#include <asm/types.h> - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX TASK_SIZE -#endif - -struct debug_entry { - u32 address; - u32 insn; -}; - -struct debug_info { - int nsaved; - struct debug_entry bp[2]; -}; - -struct thread_struct { - /* fault info */ - unsigned long address; - unsigned long trap_no; - unsigned long error_code; - /* debugging */ - struct debug_info debug; -}; - -#define INIT_THREAD { } - -#define start_thread(regs, pc, sp) \ -({ \ - unsigned long *stack = (unsigned long *)sp; \ - memset(regs->uregs, 0, sizeof(regs->uregs)); \ - regs->UCreg_asr = USER_MODE; \ - regs->UCreg_pc = pc & ~1; /* pc */ \ - regs->UCreg_sp = sp; /* sp */ \ - regs->UCreg_02 = stack[2]; /* r2 (envp) */ \ - regs->UCreg_01 = stack[1]; /* r1 (argv) */ \ - regs->UCreg_00 = stack[0]; /* r0 (argc) */ \ -}) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -unsigned long get_wchan(struct task_struct *p); - -#define cpu_relax() barrier() - -#define task_pt_regs(p) \ - ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) - -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->UCreg_pc) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->UCreg_sp) - -#endif - -#endif /* __UNICORE_PROCESSOR_H__ */ diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h deleted file mode 100644 index bb4cbc42c321..000000000000 --- a/arch/unicore32/include/asm/ptrace.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/ptrace.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_PTRACE_H__ -#define __UNICORE_PTRACE_H__ - -#include <uapi/asm/ptrace.h> - -#ifndef __ASSEMBLY__ - -#define user_mode(regs) \ - (processor_mode(regs) == USER_MODE) - -#define processor_mode(regs) \ - ((regs)->UCreg_asr & MODE_MASK) - -#define interrupts_enabled(regs) \ - (!((regs)->UCreg_asr & PSR_I_BIT)) - -#define fast_interrupts_enabled(regs) \ - (!((regs)->UCreg_asr & PSR_R_BIT)) - -/* Are the current registers suitable for user mode? - * (used to maintain security in signal handlers) - */ -static inline int valid_user_regs(struct pt_regs *regs) -{ - unsigned long mode = regs->UCreg_asr & MODE_MASK; - - /* - * Always clear the R (REAL) bits - */ - regs->UCreg_asr &= ~(PSR_R_BIT); - - if ((regs->UCreg_asr & PSR_I_BIT) == 0) { - if (mode == USER_MODE) - return 1; - } - - /* - * Force ASR to something logical... - */ - regs->UCreg_asr &= PSR_f | USER_MODE; - - return 0; -} - -#define instruction_pointer(regs) ((regs)->UCreg_pc) -#define user_stack_pointer(regs) ((regs)->UCreg_sp) -#define profile_pc(regs) instruction_pointer(regs) - -#endif /* __ASSEMBLY__ */ -#endif diff --git a/arch/unicore32/include/asm/stacktrace.h b/arch/unicore32/include/asm/stacktrace.h deleted file mode 100644 index 3e59f9d2faed..000000000000 --- a/arch/unicore32/include/asm/stacktrace.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/stacktrace.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_STACKTRACE_H__ -#define __UNICORE_STACKTRACE_H__ - -struct stackframe { - unsigned long fp; - unsigned long sp; - unsigned long lr; - unsigned long pc; -}; - -#ifdef CONFIG_FRAME_POINTER -extern int unwind_frame(struct stackframe *frame); -#else -#define unwind_frame(f) (-EINVAL) -#endif -extern void walk_stackframe(struct stackframe *frame, - int (*fn)(struct stackframe *, void *), void *data); - -#endif /* __UNICORE_STACKTRACE_H__ */ diff --git a/arch/unicore32/include/asm/string.h b/arch/unicore32/include/asm/string.h deleted file mode 100644 index 1649b0e4271b..000000000000 --- a/arch/unicore32/include/asm/string.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/string.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_STRING_H__ -#define __UNICORE_STRING_H__ - -/* - * We don't do inline string functions, since the - * optimised inline asm versions are not small. - */ - -#define __HAVE_ARCH_STRRCHR -extern char *strrchr(const char *s, int c); - -#define __HAVE_ARCH_STRCHR -extern char *strchr(const char *s, int c); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMCHR -extern void *memchr(const void *, int, __kernel_size_t); - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *, int, __kernel_size_t); - -#endif diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h deleted file mode 100644 index 72bd89c44d10..000000000000 --- a/arch/unicore32/include/asm/suspend.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/suspend.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_SUSPEND_H__ -#define __UNICORE_SUSPEND_H__ - -#ifndef __ASSEMBLY__ - -#include <asm/ptrace.h> - -struct swsusp_arch_regs { - struct cpu_context_save cpu_context; /* cpu context */ -#ifdef CONFIG_UNICORE_FPU_F64 - struct fp_state fpstate __attribute__((aligned(8))); -#endif -}; -#endif - -#endif /* __UNICORE_SUSPEND_H__ */ - diff --git a/arch/unicore32/include/asm/switch_to.h b/arch/unicore32/include/asm/switch_to.h deleted file mode 100644 index 12e534b3bfa5..000000000000 --- a/arch/unicore32/include/asm/switch_to.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Task switching for PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2012 GUAN Xue-tao - */ -#ifndef __UNICORE_SWITCH_TO_H__ -#define __UNICORE_SWITCH_TO_H__ - -struct task_struct; -struct thread_info; - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. schedule() itself - * contains the memory barrier to tell GCC not to cache `current'. - */ -extern struct task_struct *__switch_to(struct task_struct *, - struct thread_info *, struct thread_info *); - -#define switch_to(prev, next, last) \ - do { \ - last = __switch_to(prev, task_thread_info(prev), \ - task_thread_info(next)); \ - } while (0) - -#endif /* __UNICORE_SWITCH_TO_H__ */ diff --git a/arch/unicore32/include/asm/syscall.h b/arch/unicore32/include/asm/syscall.h deleted file mode 100644 index 607961797fff..000000000000 --- a/arch/unicore32/include/asm/syscall.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_UNICORE_SYSCALL_H -#define _ASM_UNICORE_SYSCALL_H - -#include <uapi/linux/audit.h> - -static inline int syscall_get_arch(struct task_struct *task) -{ - return AUDIT_ARCH_UNICORE; -} - -#endif /* _ASM_UNICORE_SYSCALL_H */ diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h deleted file mode 100644 index d8a6d6b7a403..000000000000 --- a/arch/unicore32/include/asm/thread_info.h +++ /dev/null @@ -1,133 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/thread_info.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_THREAD_INFO_H__ -#define __UNICORE_THREAD_INFO_H__ - -#ifdef __KERNEL__ - -#include <linux/compiler.h> -#include <asm/fpstate.h> - -#define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE 8192 -#define THREAD_START_SP (THREAD_SIZE - 8) - -#ifndef __ASSEMBLY__ - -struct task_struct; - -#include <asm/types.h> - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct cpu_context_save { - __u32 r4; - __u32 r5; - __u32 r6; - __u32 r7; - __u32 r8; - __u32 r9; - __u32 r10; - __u32 r11; - __u32 r12; - __u32 r13; - __u32 r14; - __u32 r15; - __u32 r16; - __u32 r17; - __u32 r18; - __u32 r19; - __u32 r20; - __u32 r21; - __u32 r22; - __u32 r23; - __u32 r24; - __u32 r25; - __u32 r26; - __u32 fp; - __u32 sp; - __u32 pc; -}; - -/* - * low level task data that entry.S needs immediate access to. - * __switch_to() assumes cpu_context follows immediately after cpu_domain. - */ -struct thread_info { - unsigned long flags; /* low level flags */ - int preempt_count; /* 0 => preemptable */ - /* <0 => bug */ - mm_segment_t addr_limit; /* address limit */ - struct task_struct *task; /* main task structure */ - __u32 cpu; /* cpu */ - struct cpu_context_save cpu_context; /* cpu context */ - __u32 syscall; /* syscall number */ - __u8 used_cp[16]; /* thread used copro */ -#ifdef CONFIG_UNICORE_FPU_F64 - struct fp_state fpstate __attribute__((aligned(8))); -#endif -}; - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .flags = 0, \ - .preempt_count = INIT_PREEMPT_COUNT, \ - .addr_limit = KERNEL_DS, \ -} - -/* - * how to get the thread information struct from C - */ -static inline struct thread_info *current_thread_info(void) __attribute_const__; - -static inline struct thread_info *current_thread_info(void) -{ - register unsigned long sp asm ("sp"); - return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); -} - -#define thread_saved_pc(tsk) \ - ((unsigned long)(task_thread_info(tsk)->cpu_context.pc)) -#define thread_saved_sp(tsk) \ - ((unsigned long)(task_thread_info(tsk)->cpu_context.sp)) -#define thread_saved_fp(tsk) \ - ((unsigned long)(task_thread_info(tsk)->cpu_context.fp)) - -#endif - -/* - * thread information flags: - * TIF_SYSCALL_TRACE - syscall trace active - * TIF_SIGPENDING - signal pending - * TIF_NEED_RESCHED - rescheduling necessary - * TIF_NOTIFY_RESUME - callback before returning to user - */ -#define TIF_SIGPENDING 0 -#define TIF_NEED_RESCHED 1 -#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ -#define TIF_SYSCALL_TRACE 8 -#define TIF_MEMDIE 18 -#define TIF_RESTORE_SIGMASK 20 - -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) - -/* - * Change these and you break ASM code in entry-common.S - */ -#define _TIF_WORK_MASK \ - (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME) - -#endif /* __KERNEL__ */ -#endif /* __UNICORE_THREAD_INFO_H__ */ diff --git a/arch/unicore32/include/asm/timex.h b/arch/unicore32/include/asm/timex.h deleted file mode 100644 index d714af3dbce1..000000000000 --- a/arch/unicore32/include/asm/timex.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/timex.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __UNICORE_TIMEX_H__ -#define __UNICORE_TIMEX_H__ - -#ifdef CONFIG_ARCH_FPGA - -/* in FPGA, APB clock is 33M, and OST clock is 32K, */ -/* so, 1M is selected for timer interrupt correctly */ -#define CLOCK_TICK_RATE (32*1024) - -#endif - -#if defined(CONFIG_PUV3_DB0913) \ - || defined(CONFIG_PUV3_NB0916) \ - || defined(CONFIG_PUV3_SMW0919) - -#define CLOCK_TICK_RATE (14318000) - -#endif - -#include <asm-generic/timex.h> - -#endif diff --git a/arch/unicore32/include/asm/tlb.h b/arch/unicore32/include/asm/tlb.h deleted file mode 100644 index 4663d8cc80ef..000000000000 --- a/arch/unicore32/include/asm/tlb.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/tlb.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_TLB_H__ -#define __UNICORE_TLB_H__ - -/* - * unicore32 lacks an efficient flush_tlb_range(), use flush_tlb_mm(). - */ - -#define __pte_free_tlb(tlb, pte, addr) \ - do { \ - pgtable_pte_page_dtor(pte); \ - tlb_remove_page((tlb), (pte)); \ - } while (0) - -#include <asm-generic/tlb.h> - -#endif diff --git a/arch/unicore32/include/asm/tlbflush.h b/arch/unicore32/include/asm/tlbflush.h deleted file mode 100644 index 1cf18ef55515..000000000000 --- a/arch/unicore32/include/asm/tlbflush.h +++ /dev/null @@ -1,192 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/tlbflush.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_TLBFLUSH_H__ -#define __UNICORE_TLBFLUSH_H__ - -#ifndef __ASSEMBLY__ - -#include <linux/sched.h> - -extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, - struct vm_area_struct *); -extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); - -/* - * TLB Management - * ============== - * - * The arch/unicore/mm/tlb-*.S files implement these methods. - * - * The TLB specific code is expected to perform whatever tests it - * needs to determine if it should invalidate the TLB for each - * call. Start addresses are inclusive and end addresses are - * exclusive; it is safe to round these addresses down. - * - * flush_tlb_all() - * - * Invalidate the entire TLB. - * - * flush_tlb_mm(mm) - * - * Invalidate all TLB entries in a particular address - * space. - * - mm - mm_struct describing address space - * - * flush_tlb_range(mm,start,end) - * - * Invalidate a range of TLB entries in the specified - * address space. - * - mm - mm_struct describing address space - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - * flush_tlb_page(vaddr,vma) - * - * Invalidate the specified page in the specified address range. - * - vaddr - virtual address (may not be aligned) - * - vma - vma_struct describing address range - * - * flush_kern_tlb_page(kaddr) - * - * Invalidate the TLB entry for the specified page. The address - * will be in the kernels virtual memory space. Current uses - * only require the D-TLB to be invalidated. - * - kaddr - Kernel virtual memory address - */ - -static inline void local_flush_tlb_all(void) -{ - const int zero = 0; - - /* TLB invalidate all */ - asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (zero) : "cc"); -} - -static inline void local_flush_tlb_mm(struct mm_struct *mm) -{ - const int zero = 0; - - if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { - /* TLB invalidate all */ - asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (zero) : "cc"); - } - put_cpu(); -} - -static inline void -local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) -{ - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { -#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE - /* iTLB invalidate page */ - asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (uaddr & PAGE_MASK) : "cc"); - /* dTLB invalidate page */ - asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (uaddr & PAGE_MASK) : "cc"); -#else - /* TLB invalidate all */ - asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (uaddr & PAGE_MASK) : "cc"); -#endif - } -} - -static inline void local_flush_tlb_kernel_page(unsigned long kaddr) -{ -#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE - /* iTLB invalidate page */ - asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (kaddr & PAGE_MASK) : "cc"); - /* dTLB invalidate page */ - asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (kaddr & PAGE_MASK) : "cc"); -#else - /* TLB invalidate all */ - asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (kaddr & PAGE_MASK) : "cc"); -#endif -} - -/* - * flush_pmd_entry - * - * Flush a PMD entry (word aligned, or double-word aligned) to - * RAM if the TLB for the CPU we are running on requires this. - * This is typically used when we are creating PMD entries. - * - * clean_pmd_entry - * - * Clean (but don't drain the write buffer) if the CPU requires - * these operations. This is typically used when we are removing - * PMD entries. - */ -static inline void flush_pmd_entry(pmd_t *pmd) -{ -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - /* flush dcache line, see dcacheline_flush in proc-macros.S */ - asm("mov r1, %0 << #20\n" - "ldw r2, =_stext\n" - "add r2, r2, r1 >> #20\n" - "ldw r1, [r2+], #0x0000\n" - "ldw r1, [r2+], #0x1000\n" - "ldw r1, [r2+], #0x2000\n" - "ldw r1, [r2+], #0x3000\n" - : : "r" (pmd) : "r1", "r2"); -#else - /* flush dcache all */ - asm("movc p0.c5, %0, #14; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (pmd) : "cc"); -#endif -} - -static inline void clean_pmd_entry(pmd_t *pmd) -{ -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - /* clean dcache line */ - asm("movc p0.c5, %0, #11; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (__pa(pmd) & ~(L1_CACHE_BYTES - 1)) : "cc"); -#else - /* clean dcache all */ - asm("movc p0.c5, %0, #10; nop; nop; nop; nop; nop; nop; nop; nop" - : : "r" (pmd) : "cc"); -#endif -} - -/* - * Convert calls to our calling convention. - */ -#define local_flush_tlb_range(vma, start, end) \ - __cpu_flush_user_tlb_range(start, end, vma) -#define local_flush_tlb_kernel_range(s, e) \ - __cpu_flush_kern_tlb_range(s, e) - -#define flush_tlb_all local_flush_tlb_all -#define flush_tlb_mm local_flush_tlb_mm -#define flush_tlb_page local_flush_tlb_page -#define flush_tlb_kernel_page local_flush_tlb_kernel_page -#define flush_tlb_range local_flush_tlb_range -#define flush_tlb_kernel_range local_flush_tlb_kernel_range - -/* - * if PG_dcache_clean is not set for the page, we need to ensure that any - * cache entries for the kernels virtual memory range are written - * back to the page. - */ -extern void update_mmu_cache(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep); - -extern void do_bad_area(unsigned long addr, unsigned int fsr, - struct pt_regs *regs); - -#endif - -#endif diff --git a/arch/unicore32/include/asm/traps.h b/arch/unicore32/include/asm/traps.h deleted file mode 100644 index ad1508a9a903..000000000000 --- a/arch/unicore32/include/asm/traps.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/traps.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_TRAP_H__ -#define __UNICORE_TRAP_H__ - -extern void __init early_trap_init(void); -extern void dump_backtrace_entry(unsigned long where, - unsigned long from, unsigned long frame); - -extern void do_DataAbort(unsigned long addr, unsigned int fsr, - struct pt_regs *regs); -#endif diff --git a/arch/unicore32/include/asm/uaccess.h b/arch/unicore32/include/asm/uaccess.h deleted file mode 100644 index 33c24f430511..000000000000 --- a/arch/unicore32/include/asm/uaccess.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/asm/uaccess.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_UACCESS_H__ -#define __UNICORE_UACCESS_H__ - -#include <asm/memory.h> - -#define __strncpy_from_user __strncpy_from_user -#define __strnlen_user __strnlen_user -#define __clear_user __clear_user - -#define __kernel_ok (uaccess_kernel()) -#define __user_ok(addr, size) (((size) <= TASK_SIZE) \ - && ((addr) <= TASK_SIZE - (size))) -#define __access_ok(addr, size) (__kernel_ok || __user_ok((addr), (size))) - -extern unsigned long __must_check -raw_copy_from_user(void *to, const void __user *from, unsigned long n); -extern unsigned long __must_check -raw_copy_to_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __must_check -__clear_user(void __user *addr, unsigned long n); -extern unsigned long __must_check -__strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long -__strnlen_user(const char __user *s, long n); -#define INLINE_COPY_FROM_USER -#define INLINE_COPY_TO_USER - -#include <asm-generic/uaccess.h> - -#endif /* __UNICORE_UACCESS_H__ */ diff --git a/arch/unicore32/include/asm/vmalloc.h b/arch/unicore32/include/asm/vmalloc.h deleted file mode 100644 index 054435818a14..000000000000 --- a/arch/unicore32/include/asm/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_UNICORE32_VMALLOC_H -#define _ASM_UNICORE32_VMALLOC_H - -#endif /* _ASM_UNICORE32_VMALLOC_H */ diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h deleted file mode 100644 index 78f77517c1c7..000000000000 --- a/arch/unicore32/include/mach/PKUnity.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/PKUnity.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -/* Be sure that virtual mapping is defined right */ -#ifndef __MACH_PUV3_HARDWARE_H__ -#error You must include hardware.h not PKUnity.h -#endif - -#include <mach/bitfield.h> - -/* - * Memory Definitions - */ -#define PKUNITY_SDRAM_BASE 0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */ -#define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */ - -/* - * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB) - * 0x80000000 - 0x8000000B 12B PCI Configuration regs - * 0x80010000 - 0x80010250 592B PCI Bridge Base - * 0x80030000 - 0x8003FFFF 64KB PCI Legacy IO - * 0x90000000 - 0x97FFFFFF 128MB PCI AHB-PCI MEM-mapping - * 0x98000000 - 0x9FFFFFFF 128MB PCI PCI-AHB MEM-mapping - */ -#define PKUNITY_PCI_BASE io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */ -#include <mach/regs-pci.h> - -#define PKUNITY_PCICFG_BASE (PKUNITY_PCI_BASE + 0x0) -#define PKUNITY_PCIBRI_BASE (PKUNITY_PCI_BASE + 0x00010000) -#define PKUNITY_PCILIO_BASE (PKUNITY_PCI_BASE + 0x00030000) -#define PKUNITY_PCIMEM_BASE (PKUNITY_PCI_BASE + 0x10000000) -#define PKUNITY_PCIAHB_BASE (PKUNITY_PCI_BASE + 0x18000000) - -/* - * PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB) - */ -#define PKUNITY_AHB_BASE io_p2v(0xC0000000) - -/* AHB-0 is DDR2 SDRAM */ -/* AHB-1 is PCI Space */ -#define PKUNITY_ARBITER_BASE (PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */ -#define PKUNITY_DDR2CTRL_BASE (PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */ -#define PKUNITY_DMAC_BASE (PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */ -#include <mach/regs-dmac.h> -#define PKUNITY_UMAL_BASE (PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */ -#include <mach/regs-umal.h> -#define PKUNITY_USB_BASE (PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */ -#define PKUNITY_SATA_BASE (PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */ -#define PKUNITY_SMC_BASE (PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */ -/* AHB-9 is for APB bridge */ -#define PKUNITY_MME_BASE (PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */ -#define PKUNITY_UNIGFX_BASE (PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */ -#include <mach/regs-unigfx.h> -#define PKUNITY_NAND_BASE (PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */ -#include <mach/regs-nand.h> -#define PKUNITY_H264D_BASE (PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */ -#define PKUNITY_H264E_BASE (PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */ - -/* - * PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB) - */ -#define PKUNITY_APB_BASE io_p2v(0xEE000000) - -#define PKUNITY_UART0_BASE (PKUNITY_APB_BASE + 0x000000) /* APB-0 */ -#define PKUNITY_UART1_BASE (PKUNITY_APB_BASE + 0x100000) /* APB-1 */ -#include <mach/regs-uart.h> -#define PKUNITY_I2C_BASE (PKUNITY_APB_BASE + 0x200000) /* APB-2 */ -#include <mach/regs-i2c.h> -#define PKUNITY_SPI_BASE (PKUNITY_APB_BASE + 0x300000) /* APB-3 */ -#include <mach/regs-spi.h> -#define PKUNITY_AC97_BASE (PKUNITY_APB_BASE + 0x400000) /* APB-4 */ -#include <mach/regs-ac97.h> -#define PKUNITY_GPIO_BASE (PKUNITY_APB_BASE + 0x500000) /* APB-5 */ -#include <mach/regs-gpio.h> -#define PKUNITY_INTC_BASE (PKUNITY_APB_BASE + 0x600000) /* APB-6 */ -#include <mach/regs-intc.h> -#define PKUNITY_RTC_BASE (PKUNITY_APB_BASE + 0x700000) /* APB-7 */ -#include <mach/regs-rtc.h> -#define PKUNITY_OST_BASE (PKUNITY_APB_BASE + 0x800000) /* APB-8 */ -#include <mach/regs-ost.h> -#define PKUNITY_RESETC_BASE (PKUNITY_APB_BASE + 0x900000) /* APB-9 */ -#include <mach/regs-resetc.h> -#define PKUNITY_PM_BASE (PKUNITY_APB_BASE + 0xA00000) /* APB-10 */ -#include <mach/regs-pm.h> -#define PKUNITY_PS2_BASE (PKUNITY_APB_BASE + 0xB00000) /* APB-11 */ -#include <mach/regs-ps2.h> -#define PKUNITY_SDC_BASE (PKUNITY_APB_BASE + 0xC00000) /* APB-12 */ -#include <mach/regs-sdc.h> - diff --git a/arch/unicore32/include/mach/bitfield.h b/arch/unicore32/include/mach/bitfield.h deleted file mode 100644 index 766b7f01f1cd..000000000000 --- a/arch/unicore32/include/mach/bitfield.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/bitfield.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __MACH_PUV3_BITFIELD_H__ -#define __MACH_PUV3_BITFIELD_H__ - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - -#define FIELD(val, vmask, vshift) (((val) & ((UData(1) << (vmask)) - 1)) << (vshift)) -#define FMASK(vmask, vshift) (((UData(1) << (vmask)) - 1) << (vshift)) - -#endif /* __MACH_PUV3_BITFIELD_H__ */ diff --git a/arch/unicore32/include/mach/dma.h b/arch/unicore32/include/mach/dma.h deleted file mode 100644 index 271001cd13c4..000000000000 --- a/arch/unicore32/include/mach/dma.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/dma.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __MACH_PUV3_DMA_H__ -#define __MACH_PUV3_DMA_H__ - -/* - * The PKUnity has six internal DMA channels. - */ -#define MAX_DMA_CHANNELS 6 - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} puv3_dma_prio; - -/* - * DMA registration - */ - -extern int puv3_request_dma(char *name, - puv3_dma_prio prio, - void (*irq_handler)(int, void *), - void (*err_handler)(int, void *), - void *data); - -extern void puv3_free_dma(int dma_ch); - -static inline void puv3_stop_dma(int ch) -{ - writel(readl(DMAC_CONFIG(ch)) & ~DMAC_CONFIG_EN, DMAC_CONFIG(ch)); -} - -static inline void puv3_resume_dma(int ch) -{ - writel(readl(DMAC_CONFIG(ch)) | DMAC_CONFIG_EN, DMAC_CONFIG(ch)); -} - -#endif /* __MACH_PUV3_DMA_H__ */ diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h deleted file mode 100644 index 2d7571cbd1d0..000000000000 --- a/arch/unicore32/include/mach/hardware.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/hardware.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This file contains the hardware definitions for PKUnity architecture - */ - -#ifndef __MACH_PUV3_HARDWARE_H__ -#define __MACH_PUV3_HARDWARE_H__ - -#include <mach/PKUnity.h> - -#ifndef __ASSEMBLY__ -#define io_p2v(x) (void __iomem *)((x) - PKUNITY_MMIO_BASE) -#define io_v2p(x) (phys_addr_t)((x) + PKUNITY_MMIO_BASE) -#else -#define io_p2v(x) ((x) - PKUNITY_MMIO_BASE) -#define io_v2p(x) ((x) + PKUNITY_MMIO_BASE) -#endif - -#define PCIBIOS_MIN_IO 0x4000 /* should lower than 64KB */ -#define PCIBIOS_MIN_MEM io_v2p(PKUNITY_PCIMEM_BASE) - -#define pcibios_assign_all_busses() 1 - -#endif /* __MACH_PUV3_HARDWARE_H__ */ diff --git a/arch/unicore32/include/mach/map.h b/arch/unicore32/include/mach/map.h deleted file mode 100644 index 7a83eeeb1287..000000000000 --- a/arch/unicore32/include/mach/map.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/map.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Page table mapping constructs and function prototypes - */ -#define MT_DEVICE 0 -#define MT_DEVICE_CACHED 2 -#define MT_KUSER 7 -#define MT_HIGH_VECTORS 8 -#define MT_MEMORY 9 -#define MT_ROM 10 - diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h deleted file mode 100644 index b4e6035cb9a3..000000000000 --- a/arch/unicore32/include/mach/memory.h +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/memory.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __MACH_PUV3_MEMORY_H__ -#define __MACH_PUV3_MEMORY_H__ - -#include <mach/hardware.h> - -/* Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) -/* The base address of exception vectors. */ -#define VECTORS_BASE UL(0xffff0000) -/* The base address of kuser area. */ -#define KUSER_BASE UL(0x80000000) - -#ifdef __ASSEMBLY__ -/* The byte offset of the kernel image in RAM from the start of RAM. */ -#define KERNEL_IMAGE_START 0x00408000 -#endif - -#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) - -void puv3_pci_adjust_zones(unsigned long *max_zone_pfn); - -#define arch_adjust_zones(max_zone_pfn) \ - puv3_pci_adjust_zones(max_zone_pfn) - -#endif - -/* - * PCI controller in PKUnity-3 masks highest 5-bit for upstream channel, - * so we must limit the DMA allocation within 128M physical memory for - * supporting PCI devices. - */ -#define PCI_DMA_THRESHOLD (PHYS_OFFSET + SZ_128M - 1) - -#define is_pcibus_device(dev) (dev && \ - (strncmp(dev->bus->name, "pci", 3) == 0)) - -#define __virt_to_pcibus(x) (__virt_to_phys((x) + PKUNITY_PCIAHB_BASE)) -#define __pcibus_to_virt(x) (__phys_to_virt(x) - PKUNITY_PCIAHB_BASE) - -/* kuser area */ -#define KUSER_VECPAGE_BASE (KUSER_BASE + UL(0x3fff0000)) -/* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */ -#define kuser_vecpage_to_vectors(x) ((x) - (KUSER_VECPAGE_BASE) \ - + (VECTORS_BASE)) - -#endif diff --git a/arch/unicore32/include/mach/ocd.h b/arch/unicore32/include/mach/ocd.h deleted file mode 100644 index 2a814929e389..000000000000 --- a/arch/unicore32/include/mach/ocd.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/ocd.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __MACH_PUV3_OCD_H__ -#define __MACH_PUV3_OCD_H__ - -#if defined(CONFIG_DEBUG_OCD) -static inline void ocd_putc(unsigned int c) -{ - int status, i = 0x2000000; - - do { - if (--i < 0) - return; - - asm volatile ("movc %0, p1.c0, #0" : "=r" (status)); - } while (status & 2); - - asm("movc p1.c1, %0, #1" : : "r" (c)); -} - -#define putc(ch) ocd_putc(ch) -#else -#define putc(ch) -#endif - -#endif diff --git a/arch/unicore32/include/mach/pm.h b/arch/unicore32/include/mach/pm.h deleted file mode 100644 index cb40b8490a57..000000000000 --- a/arch/unicore32/include/mach/pm.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore/include/mach/pm.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __PUV3_PM_H__ -#define __PUV3_PM_H__ - -#include <linux/suspend.h> - -struct puv3_cpu_pm_fns { - int save_count; - void (*save)(unsigned long *); - void (*restore)(unsigned long *); - int (*valid)(suspend_state_t state); - void (*enter)(suspend_state_t state); - int (*prepare)(void); - void (*finish)(void); -}; - -extern struct puv3_cpu_pm_fns *puv3_cpu_pm_fns; - -/* sleep.S */ -extern void puv3_cpu_suspend(unsigned int); - -extern void puv3_cpu_resume(void); - -extern int puv3_pm_enter(suspend_state_t state); - -/* Defined in hibernate_asm.S */ -extern int restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist); - -extern struct pbe *restore_pblist; -#endif diff --git a/arch/unicore32/include/mach/regs-ac97.h b/arch/unicore32/include/mach/regs-ac97.h deleted file mode 100644 index 85c601898d02..000000000000 --- a/arch/unicore32/include/mach/regs-ac97.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity AC97 Registers - */ - -#define PKUNITY_AC97_CONR (PKUNITY_AC97_BASE + 0x0000) -#define PKUNITY_AC97_OCR (PKUNITY_AC97_BASE + 0x0004) -#define PKUNITY_AC97_ICR (PKUNITY_AC97_BASE + 0x0008) -#define PKUNITY_AC97_CRAC (PKUNITY_AC97_BASE + 0x000C) -#define PKUNITY_AC97_INTR (PKUNITY_AC97_BASE + 0x0010) -#define PKUNITY_AC97_INTRSTAT (PKUNITY_AC97_BASE + 0x0014) -#define PKUNITY_AC97_INTRCLEAR (PKUNITY_AC97_BASE + 0x0018) -#define PKUNITY_AC97_ENABLE (PKUNITY_AC97_BASE + 0x001C) -#define PKUNITY_AC97_OUT_FIFO (PKUNITY_AC97_BASE + 0x0020) -#define PKUNITY_AC97_IN_FIFO (PKUNITY_AC97_BASE + 0x0030) - -#define AC97_CODEC_REG(v) FIELD((v), 7, 16) -#define AC97_CODEC_VAL(v) FIELD((v), 16, 0) -#define AC97_CODEC_WRITECOMPLETE FIELD(1, 1, 2) - -/* - * VAR PLAY SAMPLE RATE - */ -#define AC97_CMD_VPSAMPLE (FIELD(3, 2, 16) | FIELD(3, 2, 0)) - -/* - * FIX CAPTURE SAMPLE RATE - */ -#define AC97_CMD_FCSAMPLE FIELD(7, 3, 0) - -#define AC97_CMD_RESET FIELD(1, 1, 0) -#define AC97_CMD_ENABLE FIELD(1, 1, 0) -#define AC97_CMD_DISABLE FIELD(0, 1, 0) diff --git a/arch/unicore32/include/mach/regs-dmac.h b/arch/unicore32/include/mach/regs-dmac.h deleted file mode 100644 index bbdc52d06a98..000000000000 --- a/arch/unicore32/include/mach/regs-dmac.h +++ /dev/null @@ -1,82 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Direct Memory Access Controller (DMAC) - */ - -/* - * Interrupt Status Reg DMAC_ISR. - */ -#define DMAC_ISR (PKUNITY_DMAC_BASE + 0x0020) -/* - * Interrupt Transfer Complete Status Reg DMAC_ITCSR. - */ -#define DMAC_ITCSR (PKUNITY_DMAC_BASE + 0x0050) -/* - * Interrupt Transfer Complete Clear Reg DMAC_ITCCR. - */ -#define DMAC_ITCCR (PKUNITY_DMAC_BASE + 0x0060) -/* - * Interrupt Error Status Reg DMAC_IESR. - */ -#define DMAC_IESR (PKUNITY_DMAC_BASE + 0x0080) -/* - * Interrupt Error Clear Reg DMAC_IECR. - */ -#define DMAC_IECR (PKUNITY_DMAC_BASE + 0x0090) -/* - * Enable Channels Reg DMAC_ENCH. - */ -#define DMAC_ENCH (PKUNITY_DMAC_BASE + 0x00B0) - -/* - * DMA control reg. Space [byte] - */ -#define DMASp 0x00000100 - -/* - * Source Addr DMAC_SRCADDR(ch). - */ -#define DMAC_SRCADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00) -/* - * Destination Addr DMAC_DESTADDR(ch). - */ -#define DMAC_DESTADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04) -/* - * Control Reg DMAC_CONTROL(ch). - */ -#define DMAC_CONTROL(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C) -/* - * Configuration Reg DMAC_CONFIG(ch). - */ -#define DMAC_CONFIG(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10) - -#define DMAC_IR_MASK FMASK(6, 0) -/* - * select channel (ch) - */ -#define DMAC_CHANNEL(ch) FIELD(1, 1, (ch)) - -#define DMAC_CONTROL_SIZE_BYTE(v) (FIELD((v), 12, 14) | \ - FIELD(0, 3, 9) | FIELD(0, 3, 6)) -#define DMAC_CONTROL_SIZE_HWORD(v) (FIELD((v) >> 1, 12, 14) | \ - FIELD(1, 3, 9) | FIELD(1, 3, 6)) -#define DMAC_CONTROL_SIZE_WORD(v) (FIELD((v) >> 2, 12, 14) | \ - FIELD(2, 3, 9) | FIELD(2, 3, 6)) -#define DMAC_CONTROL_DI FIELD(1, 1, 13) -#define DMAC_CONTROL_SI FIELD(1, 1, 12) -#define DMAC_CONTROL_BURST_1BYTE (FIELD(0, 3, 3) | FIELD(0, 3, 0)) -#define DMAC_CONTROL_BURST_4BYTE (FIELD(3, 3, 3) | FIELD(3, 3, 0)) -#define DMAC_CONTROL_BURST_8BYTE (FIELD(5, 3, 3) | FIELD(5, 3, 0)) -#define DMAC_CONTROL_BURST_16BYTE (FIELD(7, 3, 3) | FIELD(7, 3, 0)) - -#define DMAC_CONFIG_UART0_WR (FIELD(2, 4, 11) | FIELD(1, 2, 1)) -#define DMAC_CONFIG_UART0_RD (FIELD(2, 4, 7) | FIELD(2, 2, 1)) -#define DMAC_CONFIG_UART1_WR (FIELD(3, 4, 11) | FIELD(1, 2, 1)) -#define DMAC_CONFIG_UART1RD (FIELD(3, 4, 7) | FIELD(2, 2, 1)) -#define DMAC_CONFIG_AC97WR (FIELD(4, 4, 11) | FIELD(1, 2, 1)) -#define DMAC_CONFIG_AC97RD (FIELD(4, 4, 7) | FIELD(2, 2, 1)) -#define DMAC_CONFIG_MMCWR (FIELD(7, 4, 11) | FIELD(1, 2, 1)) -#define DMAC_CONFIG_MMCRD (FIELD(7, 4, 7) | FIELD(2, 2, 1)) -#define DMAC_CONFIG_MASKITC FIELD(1, 1, 4) -#define DMAC_CONFIG_MASKIE FIELD(1, 1, 3) -#define DMAC_CONFIG_EN FIELD(1, 1, 0) diff --git a/arch/unicore32/include/mach/regs-gpio.h b/arch/unicore32/include/mach/regs-gpio.h deleted file mode 100644 index 5fc701ee33e3..000000000000 --- a/arch/unicore32/include/mach/regs-gpio.h +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity General-Purpose Input/Output (GPIO) Registers - */ - -/* - * Voltage Status Reg GPIO_GPLR. - */ -#define GPIO_GPLR (PKUNITY_GPIO_BASE + 0x0000) -/* - * Pin Direction Reg GPIO_GPDR. - */ -#define GPIO_GPDR (PKUNITY_GPIO_BASE + 0x0004) -/* - * Output Pin Set Reg GPIO_GPSR. - */ -#define GPIO_GPSR (PKUNITY_GPIO_BASE + 0x0008) -/* - * Output Pin Clear Reg GPIO_GPCR. - */ -#define GPIO_GPCR (PKUNITY_GPIO_BASE + 0x000C) -/* - * Raise Edge Detect Reg GPIO_GRER. - */ -#define GPIO_GRER (PKUNITY_GPIO_BASE + 0x0010) -/* - * Fall Edge Detect Reg GPIO_GFER. - */ -#define GPIO_GFER (PKUNITY_GPIO_BASE + 0x0014) -/* - * Edge Status Reg GPIO_GEDR. - */ -#define GPIO_GEDR (PKUNITY_GPIO_BASE + 0x0018) -/* - * Special Voltage Detect Reg GPIO_GPIR. - */ -#define GPIO_GPIR (PKUNITY_GPIO_BASE + 0x0020) - -#define GPIO_MIN (0) -#define GPIO_MAX (27) - -#define GPIO_GPIO(Nb) (0x00000001 << (Nb)) /* GPIO [0..27] */ -#define GPIO_GPIO0 GPIO_GPIO(0) /* GPIO [0] */ -#define GPIO_GPIO1 GPIO_GPIO(1) /* GPIO [1] */ -#define GPIO_GPIO2 GPIO_GPIO(2) /* GPIO [2] */ -#define GPIO_GPIO3 GPIO_GPIO(3) /* GPIO [3] */ -#define GPIO_GPIO4 GPIO_GPIO(4) /* GPIO [4] */ -#define GPIO_GPIO5 GPIO_GPIO(5) /* GPIO [5] */ -#define GPIO_GPIO6 GPIO_GPIO(6) /* GPIO [6] */ -#define GPIO_GPIO7 GPIO_GPIO(7) /* GPIO [7] */ -#define GPIO_GPIO8 GPIO_GPIO(8) /* GPIO [8] */ -#define GPIO_GPIO9 GPIO_GPIO(9) /* GPIO [9] */ -#define GPIO_GPIO10 GPIO_GPIO(10) /* GPIO [10] */ -#define GPIO_GPIO11 GPIO_GPIO(11) /* GPIO [11] */ -#define GPIO_GPIO12 GPIO_GPIO(12) /* GPIO [12] */ -#define GPIO_GPIO13 GPIO_GPIO(13) /* GPIO [13] */ -#define GPIO_GPIO14 GPIO_GPIO(14) /* GPIO [14] */ -#define GPIO_GPIO15 GPIO_GPIO(15) /* GPIO [15] */ -#define GPIO_GPIO16 GPIO_GPIO(16) /* GPIO [16] */ -#define GPIO_GPIO17 GPIO_GPIO(17) /* GPIO [17] */ -#define GPIO_GPIO18 GPIO_GPIO(18) /* GPIO [18] */ -#define GPIO_GPIO19 GPIO_GPIO(19) /* GPIO [19] */ -#define GPIO_GPIO20 GPIO_GPIO(20) /* GPIO [20] */ -#define GPIO_GPIO21 GPIO_GPIO(21) /* GPIO [21] */ -#define GPIO_GPIO22 GPIO_GPIO(22) /* GPIO [22] */ -#define GPIO_GPIO23 GPIO_GPIO(23) /* GPIO [23] */ -#define GPIO_GPIO24 GPIO_GPIO(24) /* GPIO [24] */ -#define GPIO_GPIO25 GPIO_GPIO(25) /* GPIO [25] */ -#define GPIO_GPIO26 GPIO_GPIO(26) /* GPIO [26] */ -#define GPIO_GPIO27 GPIO_GPIO(27) /* GPIO [27] */ - diff --git a/arch/unicore32/include/mach/regs-i2c.h b/arch/unicore32/include/mach/regs-i2c.h deleted file mode 100644 index b41aa7c92430..000000000000 --- a/arch/unicore32/include/mach/regs-i2c.h +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Inter-integrated Circuit (I2C) Registers - */ - -/* - * Control Reg I2C_CON. - */ -#define I2C_CON (PKUNITY_I2C_BASE + 0x0000) -/* - * Target Address Reg I2C_TAR. - */ -#define I2C_TAR (PKUNITY_I2C_BASE + 0x0004) -/* - * Data buffer and command Reg I2C_DATACMD. - */ -#define I2C_DATACMD (PKUNITY_I2C_BASE + 0x0010) -/* - * Enable Reg I2C_ENABLE. - */ -#define I2C_ENABLE (PKUNITY_I2C_BASE + 0x006C) -/* - * Status Reg I2C_STATUS. - */ -#define I2C_STATUS (PKUNITY_I2C_BASE + 0x0070) -/* - * Tx FIFO Length Reg I2C_TXFLR. - */ -#define I2C_TXFLR (PKUNITY_I2C_BASE + 0x0074) -/* - * Rx FIFO Length Reg I2C_RXFLR. - */ -#define I2C_RXFLR (PKUNITY_I2C_BASE + 0x0078) -/* - * Enable Status Reg I2C_ENSTATUS. - */ -#define I2C_ENSTATUS (PKUNITY_I2C_BASE + 0x009C) - -#define I2C_CON_MASTER FIELD(1, 1, 0) -#define I2C_CON_SPEED_STD FIELD(1, 2, 1) -#define I2C_CON_SPEED_FAST FIELD(2, 2, 1) -#define I2C_CON_RESTART FIELD(1, 1, 5) -#define I2C_CON_SLAVEDISABLE FIELD(1, 1, 6) - -#define I2C_DATACMD_READ FIELD(1, 1, 8) -#define I2C_DATACMD_WRITE FIELD(0, 1, 8) -#define I2C_DATACMD_DAT_MASK FMASK(8, 0) -#define I2C_DATACMD_DAT(v) FIELD((v), 8, 0) - -#define I2C_ENABLE_ENABLE FIELD(1, 1, 0) -#define I2C_ENABLE_DISABLE FIELD(0, 1, 0) - -#define I2C_STATUS_RFF FIELD(1, 1, 4) -#define I2C_STATUS_RFNE FIELD(1, 1, 3) -#define I2C_STATUS_TFE FIELD(1, 1, 2) -#define I2C_STATUS_TFNF FIELD(1, 1, 1) -#define I2C_STATUS_ACTIVITY FIELD(1, 1, 0) - -#define I2C_ENSTATUS_ENABLE FIELD(1, 1, 0) - -#define I2C_TAR_THERMAL 0x4f -#define I2C_TAR_SPD 0x50 -#define I2C_TAR_PWIC 0x55 -#define I2C_TAR_EEPROM 0x57 diff --git a/arch/unicore32/include/mach/regs-intc.h b/arch/unicore32/include/mach/regs-intc.h deleted file mode 100644 index 4eb1b5b571bb..000000000000 --- a/arch/unicore32/include/mach/regs-intc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUNITY Interrupt Controller (INTC) Registers - */ -/* - * INTC Level Reg INTC_ICLR. - */ -#define INTC_ICLR (PKUNITY_INTC_BASE + 0x0000) -/* - * INTC Mask Reg INTC_ICMR. - */ -#define INTC_ICMR (PKUNITY_INTC_BASE + 0x0004) -/* - * INTC Pending Reg INTC_ICPR. - */ -#define INTC_ICPR (PKUNITY_INTC_BASE + 0x0008) -/* - * INTC IRQ Pending Reg INTC_ICIP. - */ -#define INTC_ICIP (PKUNITY_INTC_BASE + 0x000C) -/* - * INTC REAL Pending Reg INTC_ICFP. - */ -#define INTC_ICFP (PKUNITY_INTC_BASE + 0x0010) -/* - * INTC Control Reg INTC_ICCR. - */ -#define INTC_ICCR (PKUNITY_INTC_BASE + 0x0014) - diff --git a/arch/unicore32/include/mach/regs-nand.h b/arch/unicore32/include/mach/regs-nand.h deleted file mode 100644 index 7f29939251ef..000000000000 --- a/arch/unicore32/include/mach/regs-nand.h +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity NAND Controller Registers - */ -/* - * ID Reg. 0 NAND_IDR0 - */ -#define NAND_IDR0 (PKUNITY_NAND_BASE + 0x0000) -/* - * ID Reg. 1 NAND_IDR1 - */ -#define NAND_IDR1 (PKUNITY_NAND_BASE + 0x0004) -/* - * ID Reg. 2 NAND_IDR2 - */ -#define NAND_IDR2 (PKUNITY_NAND_BASE + 0x0008) -/* - * ID Reg. 3 NAND_IDR3 - */ -#define NAND_IDR3 (PKUNITY_NAND_BASE + 0x000C) -/* - * Page Address Reg 0 NAND_PAR0 - */ -#define NAND_PAR0 (PKUNITY_NAND_BASE + 0x0010) -/* - * Page Address Reg 1 NAND_PAR1 - */ -#define NAND_PAR1 (PKUNITY_NAND_BASE + 0x0014) -/* - * Page Address Reg 2 NAND_PAR2 - */ -#define NAND_PAR2 (PKUNITY_NAND_BASE + 0x0018) -/* - * ECC Enable Reg NAND_ECCEN - */ -#define NAND_ECCEN (PKUNITY_NAND_BASE + 0x001C) -/* - * Buffer Reg NAND_BUF - */ -#define NAND_BUF (PKUNITY_NAND_BASE + 0x0020) -/* - * ECC Status Reg NAND_ECCSR - */ -#define NAND_ECCSR (PKUNITY_NAND_BASE + 0x0024) -/* - * Command Reg NAND_CMD - */ -#define NAND_CMD (PKUNITY_NAND_BASE + 0x0028) -/* - * DMA Configure Reg NAND_DMACR - */ -#define NAND_DMACR (PKUNITY_NAND_BASE + 0x002C) -/* - * Interrupt Reg NAND_IR - */ -#define NAND_IR (PKUNITY_NAND_BASE + 0x0030) -/* - * Interrupt Mask Reg NAND_IMR - */ -#define NAND_IMR (PKUNITY_NAND_BASE + 0x0034) -/* - * Chip Enable Reg NAND_CHIPEN - */ -#define NAND_CHIPEN (PKUNITY_NAND_BASE + 0x0038) -/* - * Address Reg NAND_ADDR - */ -#define NAND_ADDR (PKUNITY_NAND_BASE + 0x003C) - -/* - * Command bits NAND_CMD_CMD_MASK - */ -#define NAND_CMD_CMD_MASK FMASK(4, 4) -#define NAND_CMD_CMD_READPAGE FIELD(0x0, 4, 4) -#define NAND_CMD_CMD_ERASEBLOCK FIELD(0x6, 4, 4) -#define NAND_CMD_CMD_READSTATUS FIELD(0x7, 4, 4) -#define NAND_CMD_CMD_WRITEPAGE FIELD(0x8, 4, 4) -#define NAND_CMD_CMD_READID FIELD(0x9, 4, 4) -#define NAND_CMD_CMD_RESET FIELD(0xf, 4, 4) - diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h deleted file mode 100644 index 6c63e7b7569e..000000000000 --- a/arch/unicore32/include/mach/regs-ost.h +++ /dev/null @@ -1,91 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Operating System Timer (OST) Registers - */ -/* - * Match Reg 0 OST_OSMR0 - */ -#define OST_OSMR0 (PKUNITY_OST_BASE + 0x0000) -/* - * Match Reg 1 OST_OSMR1 - */ -#define OST_OSMR1 (PKUNITY_OST_BASE + 0x0004) -/* - * Match Reg 2 OST_OSMR2 - */ -#define OST_OSMR2 (PKUNITY_OST_BASE + 0x0008) -/* - * Match Reg 3 OST_OSMR3 - */ -#define OST_OSMR3 (PKUNITY_OST_BASE + 0x000C) -/* - * Counter Reg OST_OSCR - */ -#define OST_OSCR (PKUNITY_OST_BASE + 0x0010) -/* - * Status Reg OST_OSSR - */ -#define OST_OSSR (PKUNITY_OST_BASE + 0x0014) -/* - * Watchdog Enable Reg OST_OWER - */ -#define OST_OWER (PKUNITY_OST_BASE + 0x0018) -/* - * Interrupt Enable Reg OST_OIER - */ -#define OST_OIER (PKUNITY_OST_BASE + 0x001C) - -/* - * PWM Registers: IO base address: PKUNITY_OST_BASE + 0x80 - * PWCR: Pulse Width Control Reg - * DCCR: Duty Cycle Control Reg - * PCR: Period Control Reg - */ -#define OST_PWM_PWCR (0x00) -#define OST_PWM_DCCR (0x04) -#define OST_PWM_PCR (0x08) - -/* - * Match detected 0 OST_OSSR_M0 - */ -#define OST_OSSR_M0 FIELD(1, 1, 0) -/* - * Match detected 1 OST_OSSR_M1 - */ -#define OST_OSSR_M1 FIELD(1, 1, 1) -/* - * Match detected 2 OST_OSSR_M2 - */ -#define OST_OSSR_M2 FIELD(1, 1, 2) -/* - * Match detected 3 OST_OSSR_M3 - */ -#define OST_OSSR_M3 FIELD(1, 1, 3) - -/* - * Interrupt enable 0 OST_OIER_E0 - */ -#define OST_OIER_E0 FIELD(1, 1, 0) -/* - * Interrupt enable 1 OST_OIER_E1 - */ -#define OST_OIER_E1 FIELD(1, 1, 1) -/* - * Interrupt enable 2 OST_OIER_E2 - */ -#define OST_OIER_E2 FIELD(1, 1, 2) -/* - * Interrupt enable 3 OST_OIER_E3 - */ -#define OST_OIER_E3 FIELD(1, 1, 3) - -/* - * Watchdog Match Enable OST_OWER_WME - */ -#define OST_OWER_WME FIELD(1, 1, 0) - -/* - * PWM Full Duty Cycle OST_PWMDCCR_FDCYCLE - */ -#define OST_PWMDCCR_FDCYCLE FIELD(1, 1, 10) - diff --git a/arch/unicore32/include/mach/regs-pci.h b/arch/unicore32/include/mach/regs-pci.h deleted file mode 100644 index 25bb307b87c3..000000000000 --- a/arch/unicore32/include/mach/regs-pci.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity AHB-PCI Bridge Registers - */ - -/* - * AHB/PCI fixed physical address for pci addess configuration - */ -/* - * PCICFG Bridge Base Reg. - */ -#define PCICFG_BRIBASE (PKUNITY_PCICFG_BASE + 0x0000) -/* - * PCICFG Address Reg. - */ -#define PCICFG_ADDR (PKUNITY_PCICFG_BASE + 0x0004) -/* - * PCICFG Address Reg. - */ -#define PCICFG_DATA (PKUNITY_PCICFG_BASE + 0x0008) - -/* - * PCI Bridge configuration space - */ -#define PCIBRI_ID (PKUNITY_PCIBRI_BASE + 0x0000) -#define PCIBRI_CMD (PKUNITY_PCIBRI_BASE + 0x0004) -#define PCIBRI_CLASS (PKUNITY_PCIBRI_BASE + 0x0008) -#define PCIBRI_LTR (PKUNITY_PCIBRI_BASE + 0x000C) -#define PCIBRI_BAR0 (PKUNITY_PCIBRI_BASE + 0x0010) -#define PCIBRI_BAR1 (PKUNITY_PCIBRI_BASE + 0x0014) -#define PCIBRI_BAR2 (PKUNITY_PCIBRI_BASE + 0x0018) -#define PCIBRI_BAR3 (PKUNITY_PCIBRI_BASE + 0x001C) -#define PCIBRI_BAR4 (PKUNITY_PCIBRI_BASE + 0x0020) -#define PCIBRI_BAR5 (PKUNITY_PCIBRI_BASE + 0x0024) - -#define PCIBRI_PCICTL0 (PKUNITY_PCIBRI_BASE + 0x0100) -#define PCIBRI_PCIBAR0 (PKUNITY_PCIBRI_BASE + 0x0104) -#define PCIBRI_PCIAMR0 (PKUNITY_PCIBRI_BASE + 0x0108) -#define PCIBRI_PCITAR0 (PKUNITY_PCIBRI_BASE + 0x010C) -#define PCIBRI_PCICTL1 (PKUNITY_PCIBRI_BASE + 0x0110) -#define PCIBRI_PCIBAR1 (PKUNITY_PCIBRI_BASE + 0x0114) -#define PCIBRI_PCIAMR1 (PKUNITY_PCIBRI_BASE + 0x0118) -#define PCIBRI_PCITAR1 (PKUNITY_PCIBRI_BASE + 0x011C) -#define PCIBRI_PCICTL2 (PKUNITY_PCIBRI_BASE + 0x0120) -#define PCIBRI_PCIBAR2 (PKUNITY_PCIBRI_BASE + 0x0124) -#define PCIBRI_PCIAMR2 (PKUNITY_PCIBRI_BASE + 0x0128) -#define PCIBRI_PCITAR2 (PKUNITY_PCIBRI_BASE + 0x012C) -#define PCIBRI_PCICTL3 (PKUNITY_PCIBRI_BASE + 0x0130) -#define PCIBRI_PCIBAR3 (PKUNITY_PCIBRI_BASE + 0x0134) -#define PCIBRI_PCIAMR3 (PKUNITY_PCIBRI_BASE + 0x0138) -#define PCIBRI_PCITAR3 (PKUNITY_PCIBRI_BASE + 0x013C) -#define PCIBRI_PCICTL4 (PKUNITY_PCIBRI_BASE + 0x0140) -#define PCIBRI_PCIBAR4 (PKUNITY_PCIBRI_BASE + 0x0144) -#define PCIBRI_PCIAMR4 (PKUNITY_PCIBRI_BASE + 0x0148) -#define PCIBRI_PCITAR4 (PKUNITY_PCIBRI_BASE + 0x014C) -#define PCIBRI_PCICTL5 (PKUNITY_PCIBRI_BASE + 0x0150) -#define PCIBRI_PCIBAR5 (PKUNITY_PCIBRI_BASE + 0x0154) -#define PCIBRI_PCIAMR5 (PKUNITY_PCIBRI_BASE + 0x0158) -#define PCIBRI_PCITAR5 (PKUNITY_PCIBRI_BASE + 0x015C) - -#define PCIBRI_AHBCTL0 (PKUNITY_PCIBRI_BASE + 0x0180) -#define PCIBRI_AHBBAR0 (PKUNITY_PCIBRI_BASE + 0x0184) -#define PCIBRI_AHBAMR0 (PKUNITY_PCIBRI_BASE + 0x0188) -#define PCIBRI_AHBTAR0 (PKUNITY_PCIBRI_BASE + 0x018C) -#define PCIBRI_AHBCTL1 (PKUNITY_PCIBRI_BASE + 0x0190) -#define PCIBRI_AHBBAR1 (PKUNITY_PCIBRI_BASE + 0x0194) -#define PCIBRI_AHBAMR1 (PKUNITY_PCIBRI_BASE + 0x0198) -#define PCIBRI_AHBTAR1 (PKUNITY_PCIBRI_BASE + 0x019C) -#define PCIBRI_AHBCTL2 (PKUNITY_PCIBRI_BASE + 0x01A0) -#define PCIBRI_AHBBAR2 (PKUNITY_PCIBRI_BASE + 0x01A4) -#define PCIBRI_AHBAMR2 (PKUNITY_PCIBRI_BASE + 0x01A8) -#define PCIBRI_AHBTAR2 (PKUNITY_PCIBRI_BASE + 0x01AC) -#define PCIBRI_AHBCTL3 (PKUNITY_PCIBRI_BASE + 0x01B0) -#define PCIBRI_AHBBAR3 (PKUNITY_PCIBRI_BASE + 0x01B4) -#define PCIBRI_AHBAMR3 (PKUNITY_PCIBRI_BASE + 0x01B8) -#define PCIBRI_AHBTAR3 (PKUNITY_PCIBRI_BASE + 0x01BC) -#define PCIBRI_AHBCTL4 (PKUNITY_PCIBRI_BASE + 0x01C0) -#define PCIBRI_AHBBAR4 (PKUNITY_PCIBRI_BASE + 0x01C4) -#define PCIBRI_AHBAMR4 (PKUNITY_PCIBRI_BASE + 0x01C8) -#define PCIBRI_AHBTAR4 (PKUNITY_PCIBRI_BASE + 0x01CC) -#define PCIBRI_AHBCTL5 (PKUNITY_PCIBRI_BASE + 0x01D0) -#define PCIBRI_AHBBAR5 (PKUNITY_PCIBRI_BASE + 0x01D4) -#define PCIBRI_AHBAMR5 (PKUNITY_PCIBRI_BASE + 0x01D8) -#define PCIBRI_AHBTAR5 (PKUNITY_PCIBRI_BASE + 0x01DC) - -#define PCIBRI_CTLx_AT FIELD(1, 1, 2) -#define PCIBRI_CTLx_PREF FIELD(1, 1, 1) -#define PCIBRI_CTLx_MRL FIELD(1, 1, 0) - -#define PCIBRI_BARx_ADDR FIELD(0xFFFFFFFC, 30, 2) -#define PCIBRI_BARx_IO FIELD(1, 1, 0) -#define PCIBRI_BARx_MEM FIELD(0, 1, 0) - -#define PCIBRI_CMD_IO FIELD(1, 1, 0) -#define PCIBRI_CMD_MEM FIELD(1, 1, 1) diff --git a/arch/unicore32/include/mach/regs-pm.h b/arch/unicore32/include/mach/regs-pm.h deleted file mode 100644 index 777b1ace39b9..000000000000 --- a/arch/unicore32/include/mach/regs-pm.h +++ /dev/null @@ -1,127 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUNITY Power Manager (PM) Registers - */ -/* - * PM Control Reg PM_PMCR - */ -#define PM_PMCR (PKUNITY_PM_BASE + 0x0000) -/* - * PM General Conf. Reg PM_PGCR - */ -#define PM_PGCR (PKUNITY_PM_BASE + 0x0004) -/* - * PM PLL Conf. Reg PM_PPCR - */ -#define PM_PPCR (PKUNITY_PM_BASE + 0x0008) -/* - * PM Wakeup Enable Reg PM_PWER - */ -#define PM_PWER (PKUNITY_PM_BASE + 0x000C) -/* - * PM GPIO Sleep Status Reg PM_PGSR - */ -#define PM_PGSR (PKUNITY_PM_BASE + 0x0010) -/* - * PM Clock Gate Reg PM_PCGR - */ -#define PM_PCGR (PKUNITY_PM_BASE + 0x0014) -/* - * PM SYS PLL Conf. Reg PM_PLLSYSCFG - */ -#define PM_PLLSYSCFG (PKUNITY_PM_BASE + 0x0018) -/* - * PM DDR PLL Conf. Reg PM_PLLDDRCFG - */ -#define PM_PLLDDRCFG (PKUNITY_PM_BASE + 0x001C) -/* - * PM VGA PLL Conf. Reg PM_PLLVGACFG - */ -#define PM_PLLVGACFG (PKUNITY_PM_BASE + 0x0020) -/* - * PM Div Conf. Reg PM_DIVCFG - */ -#define PM_DIVCFG (PKUNITY_PM_BASE + 0x0024) -/* - * PM SYS PLL Status Reg PM_PLLSYSSTATUS - */ -#define PM_PLLSYSSTATUS (PKUNITY_PM_BASE + 0x0028) -/* - * PM DDR PLL Status Reg PM_PLLDDRSTATUS - */ -#define PM_PLLDDRSTATUS (PKUNITY_PM_BASE + 0x002C) -/* - * PM VGA PLL Status Reg PM_PLLVGASTATUS - */ -#define PM_PLLVGASTATUS (PKUNITY_PM_BASE + 0x0030) -/* - * PM Div Status Reg PM_DIVSTATUS - */ -#define PM_DIVSTATUS (PKUNITY_PM_BASE + 0x0034) -/* - * PM Software Reset Reg PM_SWRESET - */ -#define PM_SWRESET (PKUNITY_PM_BASE + 0x0038) -/* - * PM DDR2 PAD Start Reg PM_DDR2START - */ -#define PM_DDR2START (PKUNITY_PM_BASE + 0x003C) -/* - * PM DDR2 PAD Status Reg PM_DDR2CAL0 - */ -#define PM_DDR2CAL0 (PKUNITY_PM_BASE + 0x0040) -/* - * PM PLL DFC Done Reg PM_PLLDFCDONE - */ -#define PM_PLLDFCDONE (PKUNITY_PM_BASE + 0x0044) - -#define PM_PMCR_SFB FIELD(1, 1, 0) -#define PM_PMCR_IFB FIELD(1, 1, 1) -#define PM_PMCR_CFBSYS FIELD(1, 1, 2) -#define PM_PMCR_CFBDDR FIELD(1, 1, 3) -#define PM_PMCR_CFBVGA FIELD(1, 1, 4) -#define PM_PMCR_CFBDIVBCLK FIELD(1, 1, 5) - -/* - * GPIO 8~27 wake-up enable PM_PWER_GPIOHIGH - */ -#define PM_PWER_GPIOHIGH FIELD(1, 1, 8) -/* - * RTC alarm wake-up enable PM_PWER_RTC - */ -#define PM_PWER_RTC FIELD(1, 1, 31) - -#define PM_PCGR_BCLK64DDR FIELD(1, 1, 0) -#define PM_PCGR_BCLK64VGA FIELD(1, 1, 1) -#define PM_PCGR_BCLKDDR FIELD(1, 1, 2) -#define PM_PCGR_BCLKPCI FIELD(1, 1, 4) -#define PM_PCGR_BCLKDMAC FIELD(1, 1, 5) -#define PM_PCGR_BCLKUMAL FIELD(1, 1, 6) -#define PM_PCGR_BCLKUSB FIELD(1, 1, 7) -#define PM_PCGR_BCLKMME FIELD(1, 1, 10) -#define PM_PCGR_BCLKNAND FIELD(1, 1, 11) -#define PM_PCGR_BCLKH264E FIELD(1, 1, 12) -#define PM_PCGR_BCLKVGA FIELD(1, 1, 13) -#define PM_PCGR_BCLKH264D FIELD(1, 1, 14) -#define PM_PCGR_VECLK FIELD(1, 1, 15) -#define PM_PCGR_HECLK FIELD(1, 1, 16) -#define PM_PCGR_HDCLK FIELD(1, 1, 17) -#define PM_PCGR_NANDCLK FIELD(1, 1, 18) -#define PM_PCGR_GECLK FIELD(1, 1, 19) -#define PM_PCGR_VGACLK FIELD(1, 1, 20) -#define PM_PCGR_PCICLK FIELD(1, 1, 21) -#define PM_PCGR_SATACLK FIELD(1, 1, 25) - -/* - * [23:20]PM_DIVCFG_VGACLK(v) - */ -#define PM_DIVCFG_VGACLK_MASK FMASK(4, 20) -#define PM_DIVCFG_VGACLK(v) FIELD((v), 4, 20) - -#define PM_SWRESET_USB FIELD(1, 1, 6) -#define PM_SWRESET_VGADIV FIELD(1, 1, 26) -#define PM_SWRESET_GEDIV FIELD(1, 1, 27) - -#define PM_PLLDFCDONE_SYSDFC FIELD(1, 1, 0) -#define PM_PLLDFCDONE_DDRDFC FIELD(1, 1, 1) -#define PM_PLLDFCDONE_VGADFC FIELD(1, 1, 2) diff --git a/arch/unicore32/include/mach/regs-ps2.h b/arch/unicore32/include/mach/regs-ps2.h deleted file mode 100644 index d539d7482462..000000000000 --- a/arch/unicore32/include/mach/regs-ps2.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity PS2 Controller Registers - */ -/* - * the same as I8042_DATA_REG PS2_DATA - */ -#define PS2_DATA (PKUNITY_PS2_BASE + 0x0060) -/* - * the same as I8042_COMMAND_REG PS2_COMMAND - */ -#define PS2_COMMAND (PKUNITY_PS2_BASE + 0x0064) -/* - * the same as I8042_STATUS_REG PS2_STATUS - */ -#define PS2_STATUS (PKUNITY_PS2_BASE + 0x0064) -/* - * counter reg PS2_CNT - */ -#define PS2_CNT (PKUNITY_PS2_BASE + 0x0068) - diff --git a/arch/unicore32/include/mach/regs-resetc.h b/arch/unicore32/include/mach/regs-resetc.h deleted file mode 100644 index 5f2b9d77a9ec..000000000000 --- a/arch/unicore32/include/mach/regs-resetc.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Reset Controller (RC) Registers - */ -/* - * Software Reset Register - */ -#define RESETC_SWRR (PKUNITY_RESETC_BASE + 0x0000) -/* - * Reset Status Register - */ -#define RESETC_RSSR (PKUNITY_RESETC_BASE + 0x0004) - -/* - * Software Reset Bit - */ -#define RESETC_SWRR_SRB FIELD(1, 1, 0) - -/* - * Hardware Reset - */ -#define RESETC_RSSR_HWR FIELD(1, 1, 0) -/* - * Software Reset - */ -#define RESETC_RSSR_SWR FIELD(1, 1, 1) -/* - * Watchdog Reset - */ -#define RESETC_RSSR_WDR FIELD(1, 1, 2) -/* - * Sleep Mode Reset - */ -#define RESETC_RSSR_SMR FIELD(1, 1, 3) - diff --git a/arch/unicore32/include/mach/regs-rtc.h b/arch/unicore32/include/mach/regs-rtc.h deleted file mode 100644 index f2f7f47eb65e..000000000000 --- a/arch/unicore32/include/mach/regs-rtc.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Real-Time Clock (RTC) control registers - */ -/* - * RTC Alarm Reg RTC_RTAR - */ -#define RTC_RTAR (PKUNITY_RTC_BASE + 0x0000) -/* - * RTC Count Reg RTC_RCNR - */ -#define RTC_RCNR (PKUNITY_RTC_BASE + 0x0004) -/* - * RTC Trim Reg RTC_RTTR - */ -#define RTC_RTTR (PKUNITY_RTC_BASE + 0x0008) -/* - * RTC Status Reg RTC_RTSR - */ -#define RTC_RTSR (PKUNITY_RTC_BASE + 0x0010) - -/* - * ALarm detected RTC_RTSR_AL - */ -#define RTC_RTSR_AL FIELD(1, 1, 0) -/* - * 1 Hz clock detected RTC_RTSR_HZ - */ -#define RTC_RTSR_HZ FIELD(1, 1, 1) -/* - * ALarm interrupt Enable RTC_RTSR_ALE - */ -#define RTC_RTSR_ALE FIELD(1, 1, 2) -/* - * 1 Hz clock interrupt Enable RTC_RTSR_HZE - */ -#define RTC_RTSR_HZE FIELD(1, 1, 3) - diff --git a/arch/unicore32/include/mach/regs-sdc.h b/arch/unicore32/include/mach/regs-sdc.h deleted file mode 100644 index 658bfaf4cb3c..000000000000 --- a/arch/unicore32/include/mach/regs-sdc.h +++ /dev/null @@ -1,157 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Multi-Media Card and Security Digital Card (MMC/SD) Registers - */ -/* - * Clock Control Reg SDC_CCR - */ -#define SDC_CCR (PKUNITY_SDC_BASE + 0x0000) -/* - * Software Reset Reg SDC_SRR - */ -#define SDC_SRR (PKUNITY_SDC_BASE + 0x0004) -/* - * Argument Reg SDC_ARGUMENT - */ -#define SDC_ARGUMENT (PKUNITY_SDC_BASE + 0x0008) -/* - * Command Reg SDC_COMMAND - */ -#define SDC_COMMAND (PKUNITY_SDC_BASE + 0x000C) -/* - * Block Size Reg SDC_BLOCKSIZE - */ -#define SDC_BLOCKSIZE (PKUNITY_SDC_BASE + 0x0010) -/* - * Block Cound Reg SDC_BLOCKCOUNT - */ -#define SDC_BLOCKCOUNT (PKUNITY_SDC_BASE + 0x0014) -/* - * Transfer Mode Reg SDC_TMR - */ -#define SDC_TMR (PKUNITY_SDC_BASE + 0x0018) -/* - * Response Reg. 0 SDC_RES0 - */ -#define SDC_RES0 (PKUNITY_SDC_BASE + 0x001C) -/* - * Response Reg. 1 SDC_RES1 - */ -#define SDC_RES1 (PKUNITY_SDC_BASE + 0x0020) -/* - * Response Reg. 2 SDC_RES2 - */ -#define SDC_RES2 (PKUNITY_SDC_BASE + 0x0024) -/* - * Response Reg. 3 SDC_RES3 - */ -#define SDC_RES3 (PKUNITY_SDC_BASE + 0x0028) -/* - * Read Timeout Control Reg SDC_RTCR - */ -#define SDC_RTCR (PKUNITY_SDC_BASE + 0x002C) -/* - * Interrupt Status Reg SDC_ISR - */ -#define SDC_ISR (PKUNITY_SDC_BASE + 0x0030) -/* - * Interrupt Status Mask Reg SDC_ISMR - */ -#define SDC_ISMR (PKUNITY_SDC_BASE + 0x0034) -/* - * RX FIFO SDC_RXFIFO - */ -#define SDC_RXFIFO (PKUNITY_SDC_BASE + 0x0038) -/* - * TX FIFO SDC_TXFIFO - */ -#define SDC_TXFIFO (PKUNITY_SDC_BASE + 0x003C) - -/* - * SD Clock Enable SDC_CCR_CLKEN - */ -#define SDC_CCR_CLKEN FIELD(1, 1, 2) -/* - * [15:8] SDC_CCR_PDIV(v) - */ -#define SDC_CCR_PDIV(v) FIELD((v), 8, 8) - -/* - * Software reset enable SDC_SRR_ENABLE - */ -#define SDC_SRR_ENABLE FIELD(0, 1, 0) -/* - * Software reset disable SDC_SRR_DISABLE - */ -#define SDC_SRR_DISABLE FIELD(1, 1, 0) - -/* - * Response type SDC_COMMAND_RESTYPE_MASK - */ -#define SDC_COMMAND_RESTYPE_MASK FMASK(2, 0) -/* - * No response SDC_COMMAND_RESTYPE_NONE - */ -#define SDC_COMMAND_RESTYPE_NONE FIELD(0, 2, 0) -/* - * 136-bit long response SDC_COMMAND_RESTYPE_LONG - */ -#define SDC_COMMAND_RESTYPE_LONG FIELD(1, 2, 0) -/* - * 48-bit short response SDC_COMMAND_RESTYPE_SHORT - */ -#define SDC_COMMAND_RESTYPE_SHORT FIELD(2, 2, 0) -/* - * 48-bit short and test if busy response SDC_COMMAND_RESTYPE_SHORTBUSY - */ -#define SDC_COMMAND_RESTYPE_SHORTBUSY FIELD(3, 2, 0) -/* - * data ready SDC_COMMAND_DATAREADY - */ -#define SDC_COMMAND_DATAREADY FIELD(1, 1, 2) -#define SDC_COMMAND_CMDEN FIELD(1, 1, 3) -/* - * [10:5] SDC_COMMAND_CMDINDEX(v) - */ -#define SDC_COMMAND_CMDINDEX(v) FIELD((v), 6, 5) - -/* - * [10:0] SDC_BLOCKSIZE_BSMASK(v) - */ -#define SDC_BLOCKSIZE_BSMASK(v) FIELD((v), 11, 0) -/* - * [11:0] SDC_BLOCKCOUNT_BCMASK(v) - */ -#define SDC_BLOCKCOUNT_BCMASK(v) FIELD((v), 12, 0) - -/* - * Data Width 1bit SDC_TMR_WTH_1BIT - */ -#define SDC_TMR_WTH_1BIT FIELD(0, 1, 0) -/* - * Data Width 4bit SDC_TMR_WTH_4BIT - */ -#define SDC_TMR_WTH_4BIT FIELD(1, 1, 0) -/* - * Read SDC_TMR_DIR_READ - */ -#define SDC_TMR_DIR_READ FIELD(0, 1, 1) -/* - * Write SDC_TMR_DIR_WRITE - */ -#define SDC_TMR_DIR_WRITE FIELD(1, 1, 1) - -#define SDC_IR_MASK FMASK(13, 0) -#define SDC_IR_RESTIMEOUT FIELD(1, 1, 0) -#define SDC_IR_WRITECRC FIELD(1, 1, 1) -#define SDC_IR_READCRC FIELD(1, 1, 2) -#define SDC_IR_TXFIFOREAD FIELD(1, 1, 3) -#define SDC_IR_RXFIFOWRITE FIELD(1, 1, 4) -#define SDC_IR_READTIMEOUT FIELD(1, 1, 5) -#define SDC_IR_DATACOMPLETE FIELD(1, 1, 6) -#define SDC_IR_CMDCOMPLETE FIELD(1, 1, 7) -#define SDC_IR_RXFIFOFULL FIELD(1, 1, 8) -#define SDC_IR_RXFIFOEMPTY FIELD(1, 1, 9) -#define SDC_IR_TXFIFOFULL FIELD(1, 1, 10) -#define SDC_IR_TXFIFOEMPTY FIELD(1, 1, 11) -#define SDC_IR_ENDCMDWITHRES FIELD(1, 1, 12) diff --git a/arch/unicore32/include/mach/regs-spi.h b/arch/unicore32/include/mach/regs-spi.h deleted file mode 100644 index 3460647a9c2a..000000000000 --- a/arch/unicore32/include/mach/regs-spi.h +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Serial Peripheral Interface (SPI) Registers - */ -/* - * Control reg. 0 SPI_CR0 - */ -#define SPI_CR0 (PKUNITY_SPI_BASE + 0x0000) -/* - * Control reg. 1 SPI_CR1 - */ -#define SPI_CR1 (PKUNITY_SPI_BASE + 0x0004) -/* - * Enable reg SPI_SSIENR - */ -#define SPI_SSIENR (PKUNITY_SPI_BASE + 0x0008) -/* - * Status reg SPI_SR - */ -#define SPI_SR (PKUNITY_SPI_BASE + 0x0028) -/* - * Interrupt Mask reg SPI_IMR - */ -#define SPI_IMR (PKUNITY_SPI_BASE + 0x002C) -/* - * Interrupt Status reg SPI_ISR - */ -#define SPI_ISR (PKUNITY_SPI_BASE + 0x0030) - -/* - * Enable SPI Controller SPI_SSIENR_EN - */ -#define SPI_SSIENR_EN FIELD(1, 1, 0) - -/* - * SPI Busy SPI_SR_BUSY - */ -#define SPI_SR_BUSY FIELD(1, 1, 0) -/* - * Transmit FIFO Not Full SPI_SR_TFNF - */ -#define SPI_SR_TFNF FIELD(1, 1, 1) -/* - * Transmit FIFO Empty SPI_SR_TFE - */ -#define SPI_SR_TFE FIELD(1, 1, 2) -/* - * Receive FIFO Not Empty SPI_SR_RFNE - */ -#define SPI_SR_RFNE FIELD(1, 1, 3) -/* - * Receive FIFO Full SPI_SR_RFF - */ -#define SPI_SR_RFF FIELD(1, 1, 4) - -/* - * Trans. FIFO Empty Interrupt Status SPI_ISR_TXEIS - */ -#define SPI_ISR_TXEIS FIELD(1, 1, 0) -/* - * Trans. FIFO Overflow Interrupt Status SPI_ISR_TXOIS - */ -#define SPI_ISR_TXOIS FIELD(1, 1, 1) -/* - * Receiv. FIFO Underflow Interrupt Status SPI_ISR_RXUIS - */ -#define SPI_ISR_RXUIS FIELD(1, 1, 2) -/* - * Receiv. FIFO Overflow Interrupt Status SPI_ISR_RXOIS - */ -#define SPI_ISR_RXOIS FIELD(1, 1, 3) -/* - * Receiv. FIFO Full Interrupt Status SPI_ISR_RXFIS - */ -#define SPI_ISR_RXFIS FIELD(1, 1, 4) -#define SPI_ISR_MSTIS FIELD(1, 1, 5) - -/* - * Trans. FIFO Empty Interrupt Mask SPI_IMR_TXEIM - */ -#define SPI_IMR_TXEIM FIELD(1, 1, 0) -/* - * Trans. FIFO Overflow Interrupt Mask SPI_IMR_TXOIM - */ -#define SPI_IMR_TXOIM FIELD(1, 1, 1) -/* - * Receiv. FIFO Underflow Interrupt Mask SPI_IMR_RXUIM - */ -#define SPI_IMR_RXUIM FIELD(1, 1, 2) -/* - * Receiv. FIFO Overflow Interrupt Mask SPI_IMR_RXOIM - */ -#define SPI_IMR_RXOIM FIELD(1, 1, 3) -/* - * Receiv. FIFO Full Interrupt Mask SPI_IMR_RXFIM - */ -#define SPI_IMR_RXFIM FIELD(1, 1, 4) -#define SPI_IMR_MSTIM FIELD(1, 1, 5) - diff --git a/arch/unicore32/include/mach/regs-uart.h b/arch/unicore32/include/mach/regs-uart.h deleted file mode 100644 index 9fa6b1938b77..000000000000 --- a/arch/unicore32/include/mach/regs-uart.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * PKUnity Universal Asynchronous Receiver/Transmitter (UART) Registers - */ diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h deleted file mode 100644 index 7023089c61c6..000000000000 --- a/arch/unicore32/include/mach/regs-umal.h +++ /dev/null @@ -1,230 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity Ultra Media Access Layer (UMAL) Ethernet MAC Registers - */ - -/* MAC module of UMAL */ -/* UMAL's MAC module includes G/MII interface, several additional PHY - * interfaces, and MAC control sub-layer, which provides support for control - * frames (e.g. PAUSE frames). - */ -/* - * TX/RX reset and control UMAL_CFG1 - */ -#define UMAL_CFG1 (PKUNITY_UMAL_BASE + 0x0000) -/* - * MAC interface mode control UMAL_CFG2 - */ -#define UMAL_CFG2 (PKUNITY_UMAL_BASE + 0x0004) -/* - * Inter Packet/Frame Gap UMAL_IPGIFG - */ -#define UMAL_IPGIFG (PKUNITY_UMAL_BASE + 0x0008) -/* - * Collision retry or backoff UMAL_HALFDUPLEX - */ -#define UMAL_HALFDUPLEX (PKUNITY_UMAL_BASE + 0x000c) -/* - * Maximum Frame Length UMAL_MAXFRAME - */ -#define UMAL_MAXFRAME (PKUNITY_UMAL_BASE + 0x0010) -/* - * Test Regsiter UMAL_TESTREG - */ -#define UMAL_TESTREG (PKUNITY_UMAL_BASE + 0x001c) -/* - * MII Management Configure UMAL_MIICFG - */ -#define UMAL_MIICFG (PKUNITY_UMAL_BASE + 0x0020) -/* - * MII Management Command UMAL_MIICMD - */ -#define UMAL_MIICMD (PKUNITY_UMAL_BASE + 0x0024) -/* - * MII Management Address UMAL_MIIADDR - */ -#define UMAL_MIIADDR (PKUNITY_UMAL_BASE + 0x0028) -/* - * MII Management Control UMAL_MIICTRL - */ -#define UMAL_MIICTRL (PKUNITY_UMAL_BASE + 0x002c) -/* - * MII Management Status UMAL_MIISTATUS - */ -#define UMAL_MIISTATUS (PKUNITY_UMAL_BASE + 0x0030) -/* - * MII Management Indicator UMAL_MIIIDCT - */ -#define UMAL_MIIIDCT (PKUNITY_UMAL_BASE + 0x0034) -/* - * Interface Control UMAL_IFCTRL - */ -#define UMAL_IFCTRL (PKUNITY_UMAL_BASE + 0x0038) -/* - * Interface Status UMAL_IFSTATUS - */ -#define UMAL_IFSTATUS (PKUNITY_UMAL_BASE + 0x003c) -/* - * MAC address (high 4 bytes) UMAL_STADDR1 - */ -#define UMAL_STADDR1 (PKUNITY_UMAL_BASE + 0x0040) -/* - * MAC address (low 2 bytes) UMAL_STADDR2 - */ -#define UMAL_STADDR2 (PKUNITY_UMAL_BASE + 0x0044) - -/* FIFO MODULE OF UMAL */ -/* UMAL's FIFO module provides data queuing for increased system level - * throughput - */ -#define UMAL_FIFOCFG0 (PKUNITY_UMAL_BASE + 0x0048) -#define UMAL_FIFOCFG1 (PKUNITY_UMAL_BASE + 0x004c) -#define UMAL_FIFOCFG2 (PKUNITY_UMAL_BASE + 0x0050) -#define UMAL_FIFOCFG3 (PKUNITY_UMAL_BASE + 0x0054) -#define UMAL_FIFOCFG4 (PKUNITY_UMAL_BASE + 0x0058) -#define UMAL_FIFOCFG5 (PKUNITY_UMAL_BASE + 0x005c) -#define UMAL_FIFORAM0 (PKUNITY_UMAL_BASE + 0x0060) -#define UMAL_FIFORAM1 (PKUNITY_UMAL_BASE + 0x0064) -#define UMAL_FIFORAM2 (PKUNITY_UMAL_BASE + 0x0068) -#define UMAL_FIFORAM3 (PKUNITY_UMAL_BASE + 0x006c) -#define UMAL_FIFORAM4 (PKUNITY_UMAL_BASE + 0x0070) -#define UMAL_FIFORAM5 (PKUNITY_UMAL_BASE + 0x0074) -#define UMAL_FIFORAM6 (PKUNITY_UMAL_BASE + 0x0078) -#define UMAL_FIFORAM7 (PKUNITY_UMAL_BASE + 0x007c) - -/* MAHBE MODULE OF UMAL */ -/* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master - * and Slave ports.Registers within the M-AHBE provide Control and Status - * information concerning these transfers. - */ -/* - * Transmit Control UMAL_DMATxCtrl - */ -#define UMAL_DMATxCtrl (PKUNITY_UMAL_BASE + 0x0180) -/* - * Pointer to TX Descripter UMAL_DMATxDescriptor - */ -#define UMAL_DMATxDescriptor (PKUNITY_UMAL_BASE + 0x0184) -/* - * Status of Tx Packet Transfers UMAL_DMATxStatus - */ -#define UMAL_DMATxStatus (PKUNITY_UMAL_BASE + 0x0188) -/* - * Receive Control UMAL_DMARxCtrl - */ -#define UMAL_DMARxCtrl (PKUNITY_UMAL_BASE + 0x018c) -/* - * Pointer to Rx Descriptor UMAL_DMARxDescriptor - */ -#define UMAL_DMARxDescriptor (PKUNITY_UMAL_BASE + 0x0190) -/* - * Status of Rx Packet Transfers UMAL_DMARxStatus - */ -#define UMAL_DMARxStatus (PKUNITY_UMAL_BASE + 0x0194) -/* - * Interrupt Mask UMAL_DMAIntrMask - */ -#define UMAL_DMAIntrMask (PKUNITY_UMAL_BASE + 0x0198) -/* - * Interrupts, read only UMAL_DMAInterrupt - */ -#define UMAL_DMAInterrupt (PKUNITY_UMAL_BASE + 0x019c) - -/* - * Commands for UMAL_CFG1 register - */ -#define UMAL_CFG1_TXENABLE FIELD(1, 1, 0) -#define UMAL_CFG1_RXENABLE FIELD(1, 1, 2) -#define UMAL_CFG1_TXFLOWCTL FIELD(1, 1, 4) -#define UMAL_CFG1_RXFLOWCTL FIELD(1, 1, 5) -#define UMAL_CFG1_CONFLPBK FIELD(1, 1, 8) -#define UMAL_CFG1_RESET FIELD(1, 1, 31) -#define UMAL_CFG1_CONFFLCTL (MAC_TX_FLOW_CTL | MAC_RX_FLOW_CTL) - -/* - * Commands for UMAL_CFG2 register - */ -#define UMAL_CFG2_FULLDUPLEX FIELD(1, 1, 0) -#define UMAL_CFG2_CRCENABLE FIELD(1, 1, 1) -#define UMAL_CFG2_PADCRC FIELD(1, 1, 2) -#define UMAL_CFG2_LENGTHCHECK FIELD(1, 1, 4) -#define UMAL_CFG2_MODEMASK FMASK(2, 8) -#define UMAL_CFG2_NIBBLEMODE FIELD(1, 2, 8) -#define UMAL_CFG2_BYTEMODE FIELD(2, 2, 8) -#define UMAL_CFG2_PREAMBLENMASK FMASK(4, 12) -#define UMAL_CFG2_DEFPREAMBLEN FIELD(7, 4, 12) -#define UMAL_CFG2_FD100 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \ - | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \ - | UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX) -#define UMAL_CFG2_FD1000 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_BYTEMODE \ - | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \ - | UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX) -#define UMAL_CFG2_HD100 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \ - | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \ - | UMAL_CFG2_CRCENABLE) - -/* - * Command for UMAL_IFCTRL register - */ -#define UMAL_IFCTRL_RESET FIELD(1, 1, 31) - -/* - * Command for UMAL_MIICFG register - */ -#define UMAL_MIICFG_RESET FIELD(1, 1, 31) - -/* - * Command for UMAL_MIICMD register - */ -#define UMAL_MIICMD_READ FIELD(1, 1, 0) - -/* - * Command for UMAL_MIIIDCT register - */ -#define UMAL_MIIIDCT_BUSY FIELD(1, 1, 0) -#define UMAL_MIIIDCT_NOTVALID FIELD(1, 1, 2) - -/* - * Commands for DMATxCtrl regesters - */ -#define UMAL_DMA_Enable FIELD(1, 1, 0) - -/* - * Commands for DMARxCtrl regesters - */ -#define UMAL_DMAIntrMask_ENABLEHALFWORD FIELD(1, 1, 16) - -/* - * Command for DMARxStatus - */ -#define CLR_RX_BUS_ERR FIELD(1, 1, 3) -#define CLR_RX_OVERFLOW FIELD(1, 1, 2) -#define CLR_RX_PKT FIELD(1, 1, 0) - -/* - * Command for DMATxStatus - */ -#define CLR_TX_BUS_ERR FIELD(1, 1, 3) -#define CLR_TX_UNDERRUN FIELD(1, 1, 1) -#define CLR_TX_PKT FIELD(1, 1, 0) - -/* - * Commands for DMAIntrMask and DMAInterrupt register - */ -#define INT_RX_MASK FIELD(0xd, 4, 4) -#define INT_TX_MASK FIELD(0xb, 4, 0) - -#define INT_RX_BUS_ERR FIELD(1, 1, 7) -#define INT_RX_OVERFLOW FIELD(1, 1, 6) -#define INT_RX_PKT FIELD(1, 1, 4) -#define INT_TX_BUS_ERR FIELD(1, 1, 3) -#define INT_TX_UNDERRUN FIELD(1, 1, 1) -#define INT_TX_PKT FIELD(1, 1, 0) - -/* - * MARCOS of UMAL's descriptors - */ -#define UMAL_DESC_PACKETSIZE_EMPTY FIELD(1, 1, 31) -#define UMAL_DESC_PACKETSIZE_NONEMPTY FIELD(0, 1, 31) -#define UMAL_DESC_PACKETSIZE_SIZEMASK FMASK(12, 0) - diff --git a/arch/unicore32/include/mach/regs-unigfx.h b/arch/unicore32/include/mach/regs-unigfx.h deleted file mode 100644 index 553d1157c6b2..000000000000 --- a/arch/unicore32/include/mach/regs-unigfx.h +++ /dev/null @@ -1,201 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * PKUnity UNIGFX Registers - */ - -#define UDE_BASE (PKUNITY_UNIGFX_BASE + 0x1400) -#define UGE_BASE (PKUNITY_UNIGFX_BASE + 0x0000) - -/* - * command reg for UNIGFX DE - */ -/* - * control reg UDE_CFG - */ -#define UDE_CFG (UDE_BASE + 0x0000) -/* - * framebuffer start address reg UDE_FSA - */ -#define UDE_FSA (UDE_BASE + 0x0004) -/* - * line size reg UDE_LS - */ -#define UDE_LS (UDE_BASE + 0x0008) -/* - * pitch size reg UDE_PS - */ -#define UDE_PS (UDE_BASE + 0x000C) -/* - * horizontal active time reg UDE_HAT - */ -#define UDE_HAT (UDE_BASE + 0x0010) -/* - * horizontal blank time reg UDE_HBT - */ -#define UDE_HBT (UDE_BASE + 0x0014) -/* - * horizontal sync time reg UDE_HST - */ -#define UDE_HST (UDE_BASE + 0x0018) -/* - * vertival active time reg UDE_VAT - */ -#define UDE_VAT (UDE_BASE + 0x001C) -/* - * vertival blank time reg UDE_VBT - */ -#define UDE_VBT (UDE_BASE + 0x0020) -/* - * vertival sync time reg UDE_VST - */ -#define UDE_VST (UDE_BASE + 0x0024) -/* - * cursor position UDE_CXY - */ -#define UDE_CXY (UDE_BASE + 0x0028) -/* - * cursor front color UDE_CC0 - */ -#define UDE_CC0 (UDE_BASE + 0x002C) -/* - * cursor background color UDE_CC1 - */ -#define UDE_CC1 (UDE_BASE + 0x0030) -/* - * video position UDE_VXY - */ -#define UDE_VXY (UDE_BASE + 0x0034) -/* - * video start address reg UDE_VSA - */ -#define UDE_VSA (UDE_BASE + 0x0040) -/* - * video size reg UDE_VS - */ -#define UDE_VS (UDE_BASE + 0x004C) - -/* - * command reg for UNIGFX GE - */ -/* - * src xy reg UGE_SRCXY - */ -#define UGE_SRCXY (UGE_BASE + 0x0000) -/* - * dst xy reg UGE_DSTXY - */ -#define UGE_DSTXY (UGE_BASE + 0x0004) -/* - * pitch reg UGE_PITCH - */ -#define UGE_PITCH (UGE_BASE + 0x0008) -/* - * src start reg UGE_SRCSTART - */ -#define UGE_SRCSTART (UGE_BASE + 0x000C) -/* - * dst start reg UGE_DSTSTART - */ -#define UGE_DSTSTART (UGE_BASE + 0x0010) -/* - * width height reg UGE_WIDHEIGHT - */ -#define UGE_WIDHEIGHT (UGE_BASE + 0x0014) -/* - * rop alpah reg UGE_ROPALPHA - */ -#define UGE_ROPALPHA (UGE_BASE + 0x0018) -/* - * front color UGE_FCOLOR - */ -#define UGE_FCOLOR (UGE_BASE + 0x001C) -/* - * background color UGE_BCOLOR - */ -#define UGE_BCOLOR (UGE_BASE + 0x0020) -/* - * src color key for high value UGE_SCH - */ -#define UGE_SCH (UGE_BASE + 0x0024) -/* - * dst color key for high value UGE_DCH - */ -#define UGE_DCH (UGE_BASE + 0x0028) -/* - * src color key for low value UGE_SCL - */ -#define UGE_SCL (UGE_BASE + 0x002C) -/* - * dst color key for low value UGE_DCL - */ -#define UGE_DCL (UGE_BASE + 0x0030) -/* - * clip 0 reg UGE_CLIP0 - */ -#define UGE_CLIP0 (UGE_BASE + 0x0034) -/* - * clip 1 reg UGE_CLIP1 - */ -#define UGE_CLIP1 (UGE_BASE + 0x0038) -/* - * command reg UGE_COMMAND - */ -#define UGE_COMMAND (UGE_BASE + 0x003C) -/* - * pattern 0 UGE_P0 - */ -#define UGE_P0 (UGE_BASE + 0x0040) -#define UGE_P1 (UGE_BASE + 0x0044) -#define UGE_P2 (UGE_BASE + 0x0048) -#define UGE_P3 (UGE_BASE + 0x004C) -#define UGE_P4 (UGE_BASE + 0x0050) -#define UGE_P5 (UGE_BASE + 0x0054) -#define UGE_P6 (UGE_BASE + 0x0058) -#define UGE_P7 (UGE_BASE + 0x005C) -#define UGE_P8 (UGE_BASE + 0x0060) -#define UGE_P9 (UGE_BASE + 0x0064) -#define UGE_P10 (UGE_BASE + 0x0068) -#define UGE_P11 (UGE_BASE + 0x006C) -#define UGE_P12 (UGE_BASE + 0x0070) -#define UGE_P13 (UGE_BASE + 0x0074) -#define UGE_P14 (UGE_BASE + 0x0078) -#define UGE_P15 (UGE_BASE + 0x007C) -#define UGE_P16 (UGE_BASE + 0x0080) -#define UGE_P17 (UGE_BASE + 0x0084) -#define UGE_P18 (UGE_BASE + 0x0088) -#define UGE_P19 (UGE_BASE + 0x008C) -#define UGE_P20 (UGE_BASE + 0x0090) -#define UGE_P21 (UGE_BASE + 0x0094) -#define UGE_P22 (UGE_BASE + 0x0098) -#define UGE_P23 (UGE_BASE + 0x009C) -#define UGE_P24 (UGE_BASE + 0x00A0) -#define UGE_P25 (UGE_BASE + 0x00A4) -#define UGE_P26 (UGE_BASE + 0x00A8) -#define UGE_P27 (UGE_BASE + 0x00AC) -#define UGE_P28 (UGE_BASE + 0x00B0) -#define UGE_P29 (UGE_BASE + 0x00B4) -#define UGE_P30 (UGE_BASE + 0x00B8) -#define UGE_P31 (UGE_BASE + 0x00BC) - -#define UDE_CFG_DST_MASK FMASK(2, 8) -#define UDE_CFG_DST8 FIELD(0x0, 2, 8) -#define UDE_CFG_DST16 FIELD(0x1, 2, 8) -#define UDE_CFG_DST24 FIELD(0x2, 2, 8) -#define UDE_CFG_DST32 FIELD(0x3, 2, 8) - -/* - * GDEN enable UDE_CFG_GDEN_ENABLE - */ -#define UDE_CFG_GDEN_ENABLE FIELD(1, 1, 3) -/* - * VDEN enable UDE_CFG_VDEN_ENABLE - */ -#define UDE_CFG_VDEN_ENABLE FIELD(1, 1, 4) -/* - * CDEN enable UDE_CFG_CDEN_ENABLE - */ -#define UDE_CFG_CDEN_ENABLE FIELD(1, 1, 5) -/* - * TIMEUP enable UDE_CFG_TIMEUP_ENABLE - */ -#define UDE_CFG_TIMEUP_ENABLE FIELD(1, 1, 6) diff --git a/arch/unicore32/include/mach/uncompress.h b/arch/unicore32/include/mach/uncompress.h deleted file mode 100644 index 0c1a56a1913f..000000000000 --- a/arch/unicore32/include/mach/uncompress.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/include/mach/uncompress.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#ifndef __MACH_PUV3_UNCOMPRESS_H__ -#define __MACH_PUV3_UNCOMPRESS_H__ - -#include <mach/hardware.h> -#include <mach/ocd.h> - -extern char input_data[]; -extern char input_data_end[]; - -static void arch_decomp_puts(const char *ptr) -{ - char c; - - while ((c = *ptr++) != '\0') { - if (c == '\n') - putc('\r'); - putc(c); - } -} -#define ARCH_HAVE_DECOMP_PUTS - -#endif /* __MACH_PUV3_UNCOMPRESS_H__ */ diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild deleted file mode 100644 index e78470141932..000000000000 --- a/arch/unicore32/include/uapi/asm/Kbuild +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -generic-y += ucontext.h diff --git a/arch/unicore32/include/uapi/asm/byteorder.h b/arch/unicore32/include/uapi/asm/byteorder.h deleted file mode 100644 index 864fe4814cf4..000000000000 --- a/arch/unicore32/include/uapi/asm/byteorder.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * linux/arch/unicore32/include/asm/byteorder.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * UniCore ONLY support Little Endian mode, the data bus is connected such - * that byte accesses appear as: - * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 - * and word accesses (data or instruction) appear as: - * d0...d31 - */ -#ifndef __UNICORE_BYTEORDER_H__ -#define __UNICORE_BYTEORDER_H__ - -#include <linux/byteorder/little_endian.h> - -#endif - diff --git a/arch/unicore32/include/uapi/asm/ptrace.h b/arch/unicore32/include/uapi/asm/ptrace.h deleted file mode 100644 index 2820de83e37d..000000000000 --- a/arch/unicore32/include/uapi/asm/ptrace.h +++ /dev/null @@ -1,91 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * linux/arch/unicore32/include/asm/ptrace.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _UAPI__UNICORE_PTRACE_H__ -#define _UAPI__UNICORE_PTRACE_H__ - -#define PTRACE_GET_THREAD_AREA 22 - -/* - * PSR bits - */ -#define USER_MODE 0x00000010 -#define REAL_MODE 0x00000011 -#define INTR_MODE 0x00000012 -#define PRIV_MODE 0x00000013 -#define ABRT_MODE 0x00000017 -#define EXTN_MODE 0x0000001b -#define SUSR_MODE 0x0000001f -#define MODE_MASK 0x0000001f -#define PSR_R_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_V_BIT 0x10000000 -#define PSR_C_BIT 0x20000000 -#define PSR_Z_BIT 0x40000000 -#define PSR_S_BIT 0x80000000 - -/* - * Groups of PSR bits - */ -#define PSR_f 0xff000000 /* Flags */ -#define PSR_c 0x000000ff /* Control */ - -#ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are stored on the - * stack during a system call. Note that sizeof(struct pt_regs) - * has to be a multiple of 8. - */ -struct pt_regs { - unsigned long uregs[34]; -}; - -#define UCreg_asr uregs[32] -#define UCreg_pc uregs[31] -#define UCreg_lr uregs[30] -#define UCreg_sp uregs[29] -#define UCreg_ip uregs[28] -#define UCreg_fp uregs[27] -#define UCreg_26 uregs[26] -#define UCreg_25 uregs[25] -#define UCreg_24 uregs[24] -#define UCreg_23 uregs[23] -#define UCreg_22 uregs[22] -#define UCreg_21 uregs[21] -#define UCreg_20 uregs[20] -#define UCreg_19 uregs[19] -#define UCreg_18 uregs[18] -#define UCreg_17 uregs[17] -#define UCreg_16 uregs[16] -#define UCreg_15 uregs[15] -#define UCreg_14 uregs[14] -#define UCreg_13 uregs[13] -#define UCreg_12 uregs[12] -#define UCreg_11 uregs[11] -#define UCreg_10 uregs[10] -#define UCreg_09 uregs[9] -#define UCreg_08 uregs[8] -#define UCreg_07 uregs[7] -#define UCreg_06 uregs[6] -#define UCreg_05 uregs[5] -#define UCreg_04 uregs[4] -#define UCreg_03 uregs[3] -#define UCreg_02 uregs[2] -#define UCreg_01 uregs[1] -#define UCreg_00 uregs[0] -#define UCreg_ORIG_00 uregs[33] - - -#endif /* __ASSEMBLY__ */ - -#endif /* _UAPI__UNICORE_PTRACE_H__ */ diff --git a/arch/unicore32/include/uapi/asm/sigcontext.h b/arch/unicore32/include/uapi/asm/sigcontext.h deleted file mode 100644 index 79e56f28e4b5..000000000000 --- a/arch/unicore32/include/uapi/asm/sigcontext.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * linux/arch/unicore32/include/asm/sigcontext.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __UNICORE_SIGCONTEXT_H__ -#define __UNICORE_SIGCONTEXT_H__ - -#include <asm/ptrace.h> -/* - * Signal context structure - contains all info to do with the state - * before the signal handler was invoked. Note: only add new entries - * to the end of the structure. - */ -struct sigcontext { - unsigned long trap_no; - unsigned long error_code; - unsigned long oldmask; - unsigned long fault_address; - struct pt_regs regs; -}; - -#endif diff --git a/arch/unicore32/include/uapi/asm/unistd.h b/arch/unicore32/include/uapi/asm/unistd.h deleted file mode 100644 index 54a7378a70b1..000000000000 --- a/arch/unicore32/include/uapi/asm/unistd.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * linux/arch/unicore32/include/asm/unistd.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define __ARCH_WANT_RENAMEAT -#define __ARCH_WANT_SET_GET_RLIMIT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_TIME32_SYSCALLS - -/* Use the standard ABI for syscalls. */ -#include <asm-generic/unistd.h> -#define __ARCH_WANT_SYS_CLONE diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile deleted file mode 100644 index 2f79aa56735b..000000000000 --- a/arch/unicore32/kernel/Makefile +++ /dev/null @@ -1,31 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# - -# Object file lists. -obj-y := dma.o elf.o entry.o process.o ptrace.o -obj-y += setup.o signal.o sys.o stacktrace.o traps.o - -obj-$(CONFIG_MODULES) += ksyms.o module.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - -obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o - -# obj-y for architecture PKUnity v3 -obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o - -obj-$(CONFIG_PUV3_GPIO) += gpio.o -obj-$(CONFIG_PUV3_PM) += pm.o sleep.o -obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o - -obj-$(CONFIG_PCI) += pci.o - -# obj-y for specific machines -obj-$(CONFIG_ARCH_PUV3) += puv3-core.o -obj-$(CONFIG_PUV3_NB0916) += puv3-nb0916.o - -head-y := head.o -obj-$(CONFIG_DEBUG_LL) += debug.o - -extra-y := $(head-y) vmlinux.lds diff --git a/arch/unicore32/kernel/asm-offsets.c b/arch/unicore32/kernel/asm-offsets.c deleted file mode 100644 index f7d672267549..000000000000 --- a/arch/unicore32/kernel/asm-offsets.c +++ /dev/null @@ -1,108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/asm-offsets.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed to extract - * and format the required data. - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/dma-mapping.h> -#include <linux/kbuild.h> -#include <linux/suspend.h> -#include <linux/thread_info.h> -#include <asm/memory.h> -#include <asm/suspend.h> - -/* - * GCC 3.0, 3.1: general bad code generation. - * GCC 3.2.0: incorrect function argument offset calculation. - * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c - * (http://gcc.gnu.org/PR8896) and incorrect structure - * initialisation in fs/jffs2/erase.c - */ -#if (__GNUC__ < 4) -#error Your compiler should upgrade to uc4 -#error Known good compilers: 4.2.2 -#endif - -int main(void) -{ - DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); - BLANK(); - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit)); - DEFINE(TI_TASK, offsetof(struct thread_info, task)); - DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); - DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context)); - DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp)); -#ifdef CONFIG_UNICORE_FPU_F64 - DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); -#endif - BLANK(); - DEFINE(S_R0, offsetof(struct pt_regs, UCreg_00)); - DEFINE(S_R1, offsetof(struct pt_regs, UCreg_01)); - DEFINE(S_R2, offsetof(struct pt_regs, UCreg_02)); - DEFINE(S_R3, offsetof(struct pt_regs, UCreg_03)); - DEFINE(S_R4, offsetof(struct pt_regs, UCreg_04)); - DEFINE(S_R5, offsetof(struct pt_regs, UCreg_05)); - DEFINE(S_R6, offsetof(struct pt_regs, UCreg_06)); - DEFINE(S_R7, offsetof(struct pt_regs, UCreg_07)); - DEFINE(S_R8, offsetof(struct pt_regs, UCreg_08)); - DEFINE(S_R9, offsetof(struct pt_regs, UCreg_09)); - DEFINE(S_R10, offsetof(struct pt_regs, UCreg_10)); - DEFINE(S_R11, offsetof(struct pt_regs, UCreg_11)); - DEFINE(S_R12, offsetof(struct pt_regs, UCreg_12)); - DEFINE(S_R13, offsetof(struct pt_regs, UCreg_13)); - DEFINE(S_R14, offsetof(struct pt_regs, UCreg_14)); - DEFINE(S_R15, offsetof(struct pt_regs, UCreg_15)); - DEFINE(S_R16, offsetof(struct pt_regs, UCreg_16)); - DEFINE(S_R17, offsetof(struct pt_regs, UCreg_17)); - DEFINE(S_R18, offsetof(struct pt_regs, UCreg_18)); - DEFINE(S_R19, offsetof(struct pt_regs, UCreg_19)); - DEFINE(S_R20, offsetof(struct pt_regs, UCreg_20)); - DEFINE(S_R21, offsetof(struct pt_regs, UCreg_21)); - DEFINE(S_R22, offsetof(struct pt_regs, UCreg_22)); - DEFINE(S_R23, offsetof(struct pt_regs, UCreg_23)); - DEFINE(S_R24, offsetof(struct pt_regs, UCreg_24)); - DEFINE(S_R25, offsetof(struct pt_regs, UCreg_25)); - DEFINE(S_R26, offsetof(struct pt_regs, UCreg_26)); - DEFINE(S_FP, offsetof(struct pt_regs, UCreg_fp)); - DEFINE(S_IP, offsetof(struct pt_regs, UCreg_ip)); - DEFINE(S_SP, offsetof(struct pt_regs, UCreg_sp)); - DEFINE(S_LR, offsetof(struct pt_regs, UCreg_lr)); - DEFINE(S_PC, offsetof(struct pt_regs, UCreg_pc)); - DEFINE(S_PSR, offsetof(struct pt_regs, UCreg_asr)); - DEFINE(S_OLD_R0, offsetof(struct pt_regs, UCreg_ORIG_00)); - DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); - BLANK(); - DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm)); - DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags)); - BLANK(); - DEFINE(VM_EXEC, VM_EXEC); - BLANK(); - DEFINE(PAGE_SZ, PAGE_SIZE); - BLANK(); - DEFINE(SYS_ERROR0, 0x9f0000); - BLANK(); - DEFINE(PBE_ADDRESS, offsetof(struct pbe, address)); - DEFINE(PBE_ORIN_ADDRESS, offsetof(struct pbe, orig_address)); - DEFINE(PBE_NEXT, offsetof(struct pbe, next)); - DEFINE(SWSUSP_CPU, offsetof(struct swsusp_arch_regs, \ - cpu_context)); -#ifdef CONFIG_UNICORE_FPU_F64 - DEFINE(SWSUSP_FPSTATE, offsetof(struct swsusp_arch_regs, \ - fpstate)); -#endif - BLANK(); - DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); - DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); - DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE); - return 0; -} diff --git a/arch/unicore32/kernel/clock.c b/arch/unicore32/kernel/clock.c deleted file mode 100644 index 41df6be0a3b2..000000000000 --- a/arch/unicore32/kernel/clock.c +++ /dev/null @@ -1,387 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/clock.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -/* - * Very simple clock implementation - */ -struct clk { - struct list_head node; - unsigned long rate; - const char *name; -}; - -static struct clk clk_ost_clk = { - .name = "OST_CLK", - .rate = CLOCK_TICK_RATE, -}; - -static struct clk clk_mclk_clk = { - .name = "MAIN_CLK", -}; - -static struct clk clk_bclk32_clk = { - .name = "BUS32_CLK", -}; - -static struct clk clk_ddr_clk = { - .name = "DDR_CLK", -}; - -static struct clk clk_vga_clk = { - .name = "VGA_CLK", -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0) { - clk = p; - break; - } - } - mutex_unlock(&clocks_mutex); - - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -struct { - unsigned long rate; - unsigned long cfg; - unsigned long div; -} vga_clk_table[] = { - {.rate = 25175000, .cfg = 0x00002001, .div = 0x9}, - {.rate = 31500000, .cfg = 0x00002001, .div = 0x7}, - {.rate = 40000000, .cfg = 0x00003801, .div = 0x9}, - {.rate = 49500000, .cfg = 0x00003801, .div = 0x7}, - {.rate = 65000000, .cfg = 0x00002c01, .div = 0x4}, - {.rate = 78750000, .cfg = 0x00002400, .div = 0x7}, - {.rate = 108000000, .cfg = 0x00002c01, .div = 0x2}, - {.rate = 106500000, .cfg = 0x00003c01, .div = 0x3}, - {.rate = 50650000, .cfg = 0x00106400, .div = 0x9}, - {.rate = 61500000, .cfg = 0x00106400, .div = 0xa}, - {.rate = 85500000, .cfg = 0x00002800, .div = 0x6}, -}; - -struct { - unsigned long mrate; - unsigned long prate; -} mclk_clk_table[] = { - {.mrate = 500000000, .prate = 0x00109801}, - {.mrate = 525000000, .prate = 0x00104C00}, - {.mrate = 550000000, .prate = 0x00105000}, - {.mrate = 575000000, .prate = 0x00105400}, - {.mrate = 600000000, .prate = 0x00105800}, - {.mrate = 625000000, .prate = 0x00105C00}, - {.mrate = 650000000, .prate = 0x00106000}, - {.mrate = 675000000, .prate = 0x00106400}, - {.mrate = 700000000, .prate = 0x00106800}, - {.mrate = 725000000, .prate = 0x00106C00}, - {.mrate = 750000000, .prate = 0x00107000}, - {.mrate = 775000000, .prate = 0x00107400}, - {.mrate = 800000000, .prate = 0x00107800}, -}; - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - if (clk == &clk_vga_clk) { - unsigned long pll_vgacfg, pll_vgadiv; - int ret, i; - - /* lookup vga_clk_table */ - ret = -EINVAL; - for (i = 0; i < ARRAY_SIZE(vga_clk_table); i++) { - if (rate == vga_clk_table[i].rate) { - pll_vgacfg = vga_clk_table[i].cfg; - pll_vgadiv = vga_clk_table[i].div; - ret = 0; - break; - } - } - - if (ret) - return ret; - - if (readl(PM_PLLVGACFG) == pll_vgacfg) - return 0; - - /* set pll vga cfg reg. */ - writel(pll_vgacfg, PM_PLLVGACFG); - - writel(PM_PMCR_CFBVGA, PM_PMCR); - while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_VGADFC) - != PM_PLLDFCDONE_VGADFC) - udelay(100); /* about 1ms */ - - /* set div cfg reg. */ - writel(readl(PM_PCGR) | PM_PCGR_VGACLK, PM_PCGR); - - writel((readl(PM_DIVCFG) & ~PM_DIVCFG_VGACLK_MASK) - | PM_DIVCFG_VGACLK(pll_vgadiv), PM_DIVCFG); - - writel(readl(PM_SWRESET) | PM_SWRESET_VGADIV, PM_SWRESET); - while ((readl(PM_SWRESET) & PM_SWRESET_VGADIV) - == PM_SWRESET_VGADIV) - udelay(100); /* 65536 bclk32, about 320us */ - - writel(readl(PM_PCGR) & ~PM_PCGR_VGACLK, PM_PCGR); - } -#ifdef CONFIG_CPU_FREQ - if (clk == &clk_mclk_clk) { - u32 pll_rate, divstatus = readl(PM_DIVSTATUS); - int ret, i; - - /* lookup mclk_clk_table */ - ret = -EINVAL; - for (i = 0; i < ARRAY_SIZE(mclk_clk_table); i++) { - if (rate == mclk_clk_table[i].mrate) { - pll_rate = mclk_clk_table[i].prate; - clk_mclk_clk.rate = mclk_clk_table[i].mrate; - ret = 0; - break; - } - } - - if (ret) - return ret; - - if (clk_mclk_clk.rate) - clk_bclk32_clk.rate = clk_mclk_clk.rate - / (((divstatus & 0x0000f000) >> 12) + 1); - - /* set pll sys cfg reg. */ - writel(pll_rate, PM_PLLSYSCFG); - - writel(PM_PMCR_CFBSYS, PM_PMCR); - while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_SYSDFC) - != PM_PLLDFCDONE_SYSDFC) - udelay(100); - /* about 1ms */ - } -#endif - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_register(struct clk *clk) -{ - mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); - mutex_unlock(&clocks_mutex); - printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name, - (clk->rate)/1000000, (clk->rate)/10000 % 100); - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - mutex_lock(&clocks_mutex); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -struct { - unsigned long prate; - unsigned long rate; -} pllrate_table[] = { - {.prate = 0x00002001, .rate = 250000000}, - {.prate = 0x00104801, .rate = 250000000}, - {.prate = 0x00104C01, .rate = 262500000}, - {.prate = 0x00002401, .rate = 275000000}, - {.prate = 0x00105001, .rate = 275000000}, - {.prate = 0x00105401, .rate = 287500000}, - {.prate = 0x00002801, .rate = 300000000}, - {.prate = 0x00105801, .rate = 300000000}, - {.prate = 0x00105C01, .rate = 312500000}, - {.prate = 0x00002C01, .rate = 325000000}, - {.prate = 0x00106001, .rate = 325000000}, - {.prate = 0x00106401, .rate = 337500000}, - {.prate = 0x00003001, .rate = 350000000}, - {.prate = 0x00106801, .rate = 350000000}, - {.prate = 0x00106C01, .rate = 362500000}, - {.prate = 0x00003401, .rate = 375000000}, - {.prate = 0x00107001, .rate = 375000000}, - {.prate = 0x00107401, .rate = 387500000}, - {.prate = 0x00003801, .rate = 400000000}, - {.prate = 0x00107801, .rate = 400000000}, - {.prate = 0x00107C01, .rate = 412500000}, - {.prate = 0x00003C01, .rate = 425000000}, - {.prate = 0x00108001, .rate = 425000000}, - {.prate = 0x00108401, .rate = 437500000}, - {.prate = 0x00004001, .rate = 450000000}, - {.prate = 0x00108801, .rate = 450000000}, - {.prate = 0x00108C01, .rate = 462500000}, - {.prate = 0x00004401, .rate = 475000000}, - {.prate = 0x00109001, .rate = 475000000}, - {.prate = 0x00109401, .rate = 487500000}, - {.prate = 0x00004801, .rate = 500000000}, - {.prate = 0x00109801, .rate = 500000000}, - {.prate = 0x00104C00, .rate = 525000000}, - {.prate = 0x00002400, .rate = 550000000}, - {.prate = 0x00105000, .rate = 550000000}, - {.prate = 0x00105400, .rate = 575000000}, - {.prate = 0x00002800, .rate = 600000000}, - {.prate = 0x00105800, .rate = 600000000}, - {.prate = 0x00105C00, .rate = 625000000}, - {.prate = 0x00002C00, .rate = 650000000}, - {.prate = 0x00106000, .rate = 650000000}, - {.prate = 0x00106400, .rate = 675000000}, - {.prate = 0x00003000, .rate = 700000000}, - {.prate = 0x00106800, .rate = 700000000}, - {.prate = 0x00106C00, .rate = 725000000}, - {.prate = 0x00003400, .rate = 750000000}, - {.prate = 0x00107000, .rate = 750000000}, - {.prate = 0x00107400, .rate = 775000000}, - {.prate = 0x00003800, .rate = 800000000}, - {.prate = 0x00107800, .rate = 800000000}, - {.prate = 0x00107C00, .rate = 825000000}, - {.prate = 0x00003C00, .rate = 850000000}, - {.prate = 0x00108000, .rate = 850000000}, - {.prate = 0x00108400, .rate = 875000000}, - {.prate = 0x00004000, .rate = 900000000}, - {.prate = 0x00108800, .rate = 900000000}, - {.prate = 0x00108C00, .rate = 925000000}, - {.prate = 0x00004400, .rate = 950000000}, - {.prate = 0x00109000, .rate = 950000000}, - {.prate = 0x00109400, .rate = 975000000}, - {.prate = 0x00004800, .rate = 1000000000}, - {.prate = 0x00109800, .rate = 1000000000}, -}; - -struct { - unsigned long prate; - unsigned long drate; -} pddr_table[] = { - {.prate = 0x00100800, .drate = 44236800}, - {.prate = 0x00100C00, .drate = 66355200}, - {.prate = 0x00101000, .drate = 88473600}, - {.prate = 0x00101400, .drate = 110592000}, - {.prate = 0x00101800, .drate = 132710400}, - {.prate = 0x00101C01, .drate = 154828800}, - {.prate = 0x00102001, .drate = 176947200}, - {.prate = 0x00102401, .drate = 199065600}, - {.prate = 0x00102801, .drate = 221184000}, - {.prate = 0x00102C01, .drate = 243302400}, - {.prate = 0x00103001, .drate = 265420800}, - {.prate = 0x00103401, .drate = 287539200}, - {.prate = 0x00103801, .drate = 309657600}, - {.prate = 0x00103C01, .drate = 331776000}, - {.prate = 0x00104001, .drate = 353894400}, -}; - -static int __init clk_init(void) -{ -#ifdef CONFIG_PUV3_PM - u32 pllrate, divstatus = readl(PM_DIVSTATUS); - u32 pcgr_val = readl(PM_PCGR); - int i; - - pcgr_val |= PM_PCGR_BCLKMME | PM_PCGR_BCLKH264E | PM_PCGR_BCLKH264D - | PM_PCGR_HECLK | PM_PCGR_HDCLK; - writel(pcgr_val, PM_PCGR); - - pllrate = readl(PM_PLLSYSSTATUS); - - /* lookup pmclk_table */ - clk_mclk_clk.rate = 0; - for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) { - if (pllrate == pllrate_table[i].prate) { - clk_mclk_clk.rate = pllrate_table[i].rate; - break; - } - } - - if (clk_mclk_clk.rate) - clk_bclk32_clk.rate = clk_mclk_clk.rate / - (((divstatus & 0x0000f000) >> 12) + 1); - - pllrate = readl(PM_PLLDDRSTATUS); - - /* lookup pddr_table */ - clk_ddr_clk.rate = 0; - for (i = 0; i < ARRAY_SIZE(pddr_table); i++) { - if (pllrate == pddr_table[i].prate) { - clk_ddr_clk.rate = pddr_table[i].drate; - break; - } - } - - pllrate = readl(PM_PLLVGASTATUS); - - /* lookup pvga_table */ - clk_vga_clk.rate = 0; - for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) { - if (pllrate == pllrate_table[i].prate) { - clk_vga_clk.rate = pllrate_table[i].rate; - break; - } - } - - if (clk_vga_clk.rate) - clk_vga_clk.rate = clk_vga_clk.rate / - (((divstatus & 0x00f00000) >> 20) + 1); - - clk_register(&clk_vga_clk); -#endif -#ifdef CONFIG_ARCH_FPGA - clk_ddr_clk.rate = 33000000; - clk_mclk_clk.rate = 33000000; - clk_bclk32_clk.rate = 33000000; -#endif - clk_register(&clk_ddr_clk); - clk_register(&clk_mclk_clk); - clk_register(&clk_bclk32_clk); - clk_register(&clk_ost_clk); - return 0; -} -core_initcall(clk_init); diff --git a/arch/unicore32/kernel/debug-macro.S b/arch/unicore32/kernel/debug-macro.S deleted file mode 100644 index 7e2da0de4f71..000000000000 --- a/arch/unicore32/kernel/debug-macro.S +++ /dev/null @@ -1,86 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/debug-macro.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Debugging macro include header - */ -#include <generated/asm-offsets.h> -#include <mach/hardware.h> - - .macro put_word_ocd, rd, rx=r16 -1001: movc \rx, p1.c0, #0 - cand.a \rx, #2 - bne 1001b - movc p1.c1, \rd, #1 - .endm - -#ifdef CONFIG_DEBUG_OCD - /* debug using UniCore On-Chip-Debugger */ - .macro addruart, rx - .endm - - .macro senduart, rd, rx - put_word_ocd \rd, \rx - .endm - - .macro busyuart, rd, rx - .endm - - .macro waituart, rd, rx - .endm -#else -#define UART_CLK_DEFAULT 3686400 * 20 - /* Uartclk = MCLK/ 2, The MCLK on my board is 3686400 * 40 */ -#define BAUD_RATE_DEFAULT 115200 - /* The baud rate of the serial port */ - -#define UART_DIVISOR_DEFAULT (UART_CLK_DEFAULT \ - / (16 * BAUD_RATE_DEFAULT) - 1) - - .macro addruart,rx - mrc p0, #0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xee000000 @ physical base address - movne \rx, #0x6e000000 @ virtual address - - @ We probe for the active serial port here - @ However, now we assume UART0 is active: epip4d - @ We assume r1 and r2 can be clobbered. - - movl r2, #UART_DIVISOR_DEFAULT - mov r1, #0x80 - str r1, [\rx, #UART_LCR_OFFSET] - and r1, r2, #0xff00 - mov r1, r1, lsr #8 - str r1, [\rx, #UART_DLH_OFFSET] - and r1, r2, #0xff - str r1, [\rx, #UART_DLL_OFFSET] - mov r1, #0x7 - str r1, [\rx, #UART_FCR_OFFSET] - mov r1, #0x3 - str r1, [\rx, #UART_LCR_OFFSET] - mov r1, #0x0 - str r1, [\rx, #UART_IER_OFFSET] - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UART_THR_OFFSET] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART_LSR_OFFSET] - tst \rd, #UART_LSR_THRE - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UART_LSR_OFFSET] - tst \rd, #UART_LSR_TEMT - bne 1001b - .endm -#endif - diff --git a/arch/unicore32/kernel/debug.S b/arch/unicore32/kernel/debug.S deleted file mode 100644 index 13bc8c8550e4..000000000000 --- a/arch/unicore32/kernel/debug.S +++ /dev/null @@ -1,82 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/debug.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * 32-bit debugging code - */ -#include <linux/linkage.h> -#include <asm/assembler.h> - - .text - -/* - * Some debugging routines (useful if you've got MM problems and - * printk isn't working). For DEBUGGING ONLY!!! Do not leave - * references to these in a production kernel! - */ -#include "debug-macro.S" - -/* - * Useful debugging routines - */ -ENTRY(printhex8) - mov r1, #8 - b printhex -ENDPROC(printhex8) - -ENTRY(printhex4) - mov r1, #4 - b printhex -ENDPROC(printhex4) - -ENTRY(printhex2) - mov r1, #2 -printhex: adr r2, hexbuf - add r3, r2, r1 - mov r1, #0 - stb r1, [r3] -1: and r1, r0, #15 - mov r0, r0 >> #4 - csub.a r1, #10 - beg 2f - add r1, r1, #'0' - 'a' + 10 -2: add r1, r1, #'a' - 10 - stb.w r1, [r3+], #-1 - cxor.a r3, r2 - bne 1b - mov r0, r2 - b printascii -ENDPROC(printhex2) - - .ltorg - -ENTRY(printascii) - addruart r3 - b 2f -1: waituart r2, r3 - senduart r1, r3 - busyuart r2, r3 - cxor.a r1, #'\n' - cmoveq r1, #'\r' - beq 1b -2: cxor.a r0, #0 - beq 3f - ldb.w r1, [r0]+, #1 - cxor.a r1, #0 - bne 1b -3: mov pc, lr -ENDPROC(printascii) - -ENTRY(printch) - addruart r3 - mov r1, r0 - mov r0, #0 - b 1b -ENDPROC(printch) - -hexbuf: .space 16 - diff --git a/arch/unicore32/kernel/dma.c b/arch/unicore32/kernel/dma.c deleted file mode 100644 index 7a0e2d4d6077..000000000000 --- a/arch/unicore32/kernel/dma.c +++ /dev/null @@ -1,179 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/dma.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> - -struct dma_channel { - char *name; - puv3_dma_prio prio; - void (*irq_handler)(int, void *); - void (*err_handler)(int, void *); - void *data; -}; - -static struct dma_channel dma_channels[MAX_DMA_CHANNELS]; - -int puv3_request_dma(char *name, puv3_dma_prio prio, - void (*irq_handler)(int, void *), - void (*err_handler)(int, void *), - void *data) -{ - unsigned long flags; - int i, found = 0; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - local_irq_save(flags); - - do { - /* try grabbing a DMA channel with the requested priority */ - for (i = 0; i < MAX_DMA_CHANNELS; i++) { - if ((dma_channels[i].prio == prio) && - !dma_channels[i].name) { - found = 1; - break; - } - } - /* if requested prio group is full, try a hier priority */ - } while (!found && prio--); - - if (found) { - dma_channels[i].name = name; - dma_channels[i].irq_handler = irq_handler; - dma_channels[i].err_handler = err_handler; - dma_channels[i].data = data; - } else { - printk(KERN_WARNING "No more available DMA channels for %s\n", - name); - i = -ENODEV; - } - - local_irq_restore(flags); - return i; -} -EXPORT_SYMBOL(puv3_request_dma); - -void puv3_free_dma(int dma_ch) -{ - unsigned long flags; - - if (!dma_channels[dma_ch].name) { - printk(KERN_CRIT - "%s: trying to free channel %d which is already freed\n", - __func__, dma_ch); - return; - } - - local_irq_save(flags); - dma_channels[dma_ch].name = NULL; - dma_channels[dma_ch].err_handler = NULL; - local_irq_restore(flags); -} -EXPORT_SYMBOL(puv3_free_dma); - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, dint; - - dint = readl(DMAC_ITCSR); - for (i = 0; i < MAX_DMA_CHANNELS; i++) { - if (dint & DMAC_CHANNEL(i)) { - struct dma_channel *channel = &dma_channels[i]; - - /* Clear TC interrupt of channel i */ - writel(DMAC_CHANNEL(i), DMAC_ITCCR); - writel(0, DMAC_ITCCR); - - if (channel->name && channel->irq_handler) { - channel->irq_handler(i, channel->data); - } else { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING "spurious IRQ for" - " DMA channel %d\n", i); - } - } - } - return IRQ_HANDLED; -} - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, dint; - - dint = readl(DMAC_IESR); - for (i = 0; i < MAX_DMA_CHANNELS; i++) { - if (dint & DMAC_CHANNEL(i)) { - struct dma_channel *channel = &dma_channels[i]; - - /* Clear Err interrupt of channel i */ - writel(DMAC_CHANNEL(i), DMAC_IECR); - writel(0, DMAC_IECR); - - if (channel->name && channel->err_handler) { - channel->err_handler(i, channel->data); - } else { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING "spurious IRQ for" - " DMA channel %d\n", i); - } - } - } - return IRQ_HANDLED; -} - -int __init puv3_init_dma(void) -{ - int i, ret; - - /* dma channel priorities on v8 processors: - * ch 0 - 1 <--> (0) DMA_PRIO_HIGH - * ch 2 - 3 <--> (1) DMA_PRIO_MEDIUM - * ch 4 - 5 <--> (2) DMA_PRIO_LOW - */ - for (i = 0; i < MAX_DMA_CHANNELS; i++) { - puv3_stop_dma(i); - dma_channels[i].name = NULL; - dma_channels[i].prio = min((i & 0x7) >> 1, DMA_PRIO_LOW); - } - - ret = request_irq(IRQ_DMA, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - printk(KERN_CRIT "Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(IRQ_DMAERR, dma_err_handler, 0, "DMAERR", NULL); - if (ret) { - printk(KERN_CRIT "Can't register IRQ for DMAERR\n"); - free_irq(IRQ_DMA, "DMA"); - return ret; - } - - return 0; -} - -postcore_initcall(puv3_init_dma); diff --git a/arch/unicore32/kernel/early_printk.c b/arch/unicore32/kernel/early_printk.c deleted file mode 100644 index c00b6712b8f7..000000000000 --- a/arch/unicore32/kernel/early_printk.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/early_printk.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/console.h> -#include <linux/init.h> -#include <linux/string.h> -#include <mach/ocd.h> - -/* On-Chip-Debugger functions */ - -static void early_ocd_write(struct console *con, const char *s, unsigned n) -{ - while (*s && n-- > 0) { - if (*s == '\n') - ocd_putc((int)'\r'); - ocd_putc((int)*s); - s++; - } -} - -static struct console early_ocd_console = { - .name = "earlyocd", - .write = early_ocd_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init setup_early_printk(char *buf) -{ - if (!buf || early_console) - return 0; - - early_console = &early_ocd_console; - if (strstr(buf, "keep")) - early_console->flags &= ~CON_BOOT; - else - early_console->flags |= CON_BOOT; - register_console(early_console); - return 0; -} -early_param("earlyprintk", setup_early_printk); diff --git a/arch/unicore32/kernel/elf.c b/arch/unicore32/kernel/elf.c deleted file mode 100644 index 22adc65a03e9..000000000000 --- a/arch/unicore32/kernel/elf.c +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/elf.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/personality.h> -#include <linux/binfmts.h> -#include <linux/elf.h> - -int elf_check_arch(const struct elf32_hdr *x) -{ - /* Make sure it's an UniCore executable */ - if (x->e_machine != EM_UNICORE) - return 0; - - /* Make sure the entry address is reasonable */ - if (x->e_entry & 3) - return 0; - - return 1; -} -EXPORT_SYMBOL(elf_check_arch); - -void elf_set_personality(const struct elf32_hdr *x) -{ - unsigned int personality = PER_LINUX; - - set_personality(personality); -} -EXPORT_SYMBOL(elf_set_personality); diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S deleted file mode 100644 index b35dc83069cb..000000000000 --- a/arch/unicore32/kernel/entry.S +++ /dev/null @@ -1,802 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/entry.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Low-level vector interface routines - */ -#include <linux/init.h> -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> -#include <asm/thread_info.h> -#include <asm/memory.h> -#include <asm/unistd.h> -#include <generated/asm-offsets.h> -#include "debug-macro.S" - -@ -@ Most of the stack format comes from struct pt_regs, but with -@ the addition of 8 bytes for storing syscall args 5 and 6. -@ -#define S_OFF 8 - -/* - * The SWI code relies on the fact that R0 is at the bottom of the stack - * (due to slow/fast restore user regs). - */ -#if S_R0 != 0 -#error "Please fix" -#endif - - .macro zero_fp -#ifdef CONFIG_FRAME_POINTER - mov fp, #0 -#endif - .endm - - .macro alignment_trap, rtemp -#ifdef CONFIG_ALIGNMENT_TRAP - ldw \rtemp, .LCcralign - ldw \rtemp, [\rtemp] - movc p0.c1, \rtemp, #0 -#endif - .endm - - .macro load_user_sp_lr, rd, rtemp, offset = 0 - mov \rtemp, asr - xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE) - mov.a asr, \rtemp @ switch to the SUSR mode - - ldw sp, [\rd+], #\offset @ load sp_user - ldw lr, [\rd+], #\offset + 4 @ load lr_user - - xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE) - mov.a asr, \rtemp @ switch back to the PRIV mode - .endm - - .macro priv_exit, rpsr - mov.a bsr, \rpsr - ldm.w (r0 - r15), [sp]+ - ldm.b (r16 - pc), [sp]+ @ load r0 - pc, asr - .endm - - .macro restore_user_regs, fast = 0, offset = 0 - ldw r1, [sp+], #\offset + S_PSR @ get calling asr - ldw lr, [sp+], #\offset + S_PC @ get pc - mov.a bsr, r1 @ save in bsr_priv - .if \fast - add sp, sp, #\offset + S_R1 @ r0 is syscall return value - ldm.w (r1 - r15), [sp]+ @ get calling r1 - r15 - ldur (r16 - lr), [sp]+ @ get calling r16 - lr - .else - ldm.w (r0 - r15), [sp]+ @ get calling r0 - r15 - ldur (r16 - lr), [sp]+ @ get calling r16 - lr - .endif - nop - add sp, sp, #S_FRAME_SIZE - S_R16 - mov.a pc, lr @ return - @ and move bsr_priv into asr - .endm - - .macro get_thread_info, rd - mov \rd, sp >> #13 - mov \rd, \rd << #13 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldw \base, =(PKUNITY_INTC_BASE) - ldw \irqstat, [\base+], #0xC @ INTC_ICIP - ldw \tmp, [\base+], #0x4 @ INTC_ICMR - and.a \irqstat, \irqstat, \tmp - beq 1001f - cntlz \irqnr, \irqstat - rsub \irqnr, \irqnr, #31 -1001: /* EQ will be set if no irqs pending */ - .endm - -#ifdef CONFIG_DEBUG_LL - .macro printreg, reg, temp - adr \temp, 901f - stm (r0-r3), [\temp]+ - stw lr, [\temp+], #0x10 - mov r0, \reg - b.l printhex8 - mov r0, #':' - b.l printch - mov r0, pc - b.l printhex8 - adr r0, 902f - b.l printascii - adr \temp, 901f - ldm (r0-r3), [\temp]+ - ldw lr, [\temp+], #0x10 - b 903f -901: .word 0, 0, 0, 0, 0 @ r0-r3, lr -902: .asciz ": epip4d\n" - .align -903: - .endm -#endif - -/* - * These are the registers used in the syscall handler, and allow us to - * have in theory up to 7 arguments to a function - r0 to r6. - * - * Note that tbl == why is intentional. - * - * We must set at least "tsk" and "why" when calling ret_with_reschedule. - */ -scno .req r21 @ syscall number -tbl .req r22 @ syscall table pointer -why .req r22 @ Linux syscall (!= 0) -tsk .req r23 @ current thread_info - -/* - * Interrupt handling. Preserves r17, r18, r19 - */ - .macro intr_handler -1: get_irqnr_and_base r0, r6, r5, lr - beq 2f - mov r1, sp - @ - @ routine called with r0 = irq number, r1 = struct pt_regs * - @ - adr lr, 1b - b asm_do_IRQ -2: - .endm - -/* - * PRIV mode handlers - */ - .macro priv_entry - sub sp, sp, #(S_FRAME_SIZE - 4) - stm (r1 - r15), [sp]+ - add r5, sp, #S_R15 - stm (r16 - r28), [r5]+ - - ldm (r1 - r3), [r0]+ - add r5, sp, #S_SP - 4 @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" - add r0, sp, #(S_FRAME_SIZE - 4) - stw.w r1, [sp+], #-4 @ save the "real" r0 copied - @ from the exception stack - - mov r1, lr - - @ - @ We are now ready to fill in the remaining blanks on the stack: - @ - @ r0 - sp_priv - @ r1 - lr_priv - @ r2 - lr_<exception>, already fixed up for correct return/restart - @ r3 - bsr_<exception> - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) - @ - stm (r0 - r4), [r5]+ - .endm - -/* - * User mode handlers - * - */ - .macro user_entry - sub sp, sp, #S_FRAME_SIZE - stm (r1 - r15), [sp+] - add r4, sp, #S_R16 - stm (r16 - r28), [r4]+ - - ldm (r1 - r3), [r0]+ - add r0, sp, #S_PC @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" - - stw r1, [sp] @ save the "real" r0 copied - @ from the exception stack - - @ - @ We are now ready to fill in the remaining blanks on the stack: - @ - @ r2 - lr_<exception>, already fixed up for correct return/restart - @ r3 - bsr_<exception> - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) - @ - @ Also, separately save sp_user and lr_user - @ - stm (r2 - r4), [r0]+ - stur (sp, lr), [r0-] - - @ - @ Enable the alignment trap while in kernel mode - @ - alignment_trap r0 - - @ - @ Clear FP to mark the first stack frame - @ - zero_fp - .endm - - .text - -@ -@ __invalid - generic code for failed exception -@ (re-entrant version of handlers) -@ -__invalid: - sub sp, sp, #S_FRAME_SIZE - stm (r1 - r15), [sp+] - add r1, sp, #S_R16 - stm (r16 - r28, sp, lr), [r1]+ - - zero_fp - - ldm (r4 - r6), [r0]+ - add r0, sp, #S_PC @ here for interlock avoidance - mov r7, #-1 @ "" "" "" "" - stw r4, [sp] @ save preserved r0 - stm (r5 - r7), [r0]+ @ lr_<exception>, - @ asr_<exception>, "old_r0" - - mov r0, sp - mov r1, asr - b bad_mode -ENDPROC(__invalid) - - .align 5 -__dabt_priv: - priv_entry - - @ - @ get ready to re-enable interrupts if appropriate - @ - mov r17, asr - cand.a r3, #PSR_I_BIT - bne 1f - andn r17, r17, #PSR_I_BIT -1: - - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context asr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. - @ - movc r1, p0.c3, #0 @ get FSR - movc r0, p0.c4, #0 @ get FAR - - @ - @ set desired INTR state, then call main handler - @ - mov.a asr, r17 - mov r2, sp - b.l do_DataAbort - - @ - @ INTRs off again before pulling preserved data off the stack - @ - disable_irq r0 - - @ - @ restore BSR and restart the instruction - @ - ldw r2, [sp+], #S_PSR - priv_exit r2 @ return from exception -ENDPROC(__dabt_priv) - - .align 5 -__intr_priv: - priv_entry - - intr_handler - - mov r0, #0 @ epip4d - movc p0.c5, r0, #14 - nop; nop; nop; nop; nop; nop; nop; nop - - ldw r4, [sp+], #S_PSR @ irqs are already disabled - - priv_exit r4 @ return from exception -ENDPROC(__intr_priv) - - .ltorg - - .align 5 -__extn_priv: - priv_entry - - mov r0, sp @ struct pt_regs *regs - mov r1, asr - b bad_mode @ not supported -ENDPROC(__extn_priv) - - .align 5 -__pabt_priv: - priv_entry - - @ - @ re-enable interrupts if appropriate - @ - mov r17, asr - cand.a r3, #PSR_I_BIT - bne 1f - andn r17, r17, #PSR_I_BIT -1: - - @ - @ set args, then call main handler - @ - @ r0 - address of faulting instruction - @ r1 - pointer to registers on stack - @ - mov r0, r2 @ pass address of aborted instruction - mov r1, #5 - mov.a asr, r17 - mov r2, sp @ regs - b.l do_PrefetchAbort @ call abort handler - - @ - @ INTRs off again before pulling preserved data off the stack - @ - disable_irq r0 - - @ - @ restore BSR and restart the instruction - @ - ldw r2, [sp+], #S_PSR - priv_exit r2 @ return from exception -ENDPROC(__pabt_priv) - - .align 5 -.LCcralign: - .word cr_alignment - - .align 5 -__dabt_user: - user_entry - -#ifdef CONFIG_UNICORE_FPU_F64 - cff ip, s31 - cand.a ip, #0x08000000 @ FPU execption traps? - beq 209f - - ldw ip, [sp+], #S_PC - add ip, ip, #4 - stw ip, [sp+], #S_PC - @ - @ fall through to the emulation code, which returns using r19 if - @ it has emulated the instruction, or the more conventional lr - @ if we are to treat this as a real extended instruction - @ - @ r0 - instruction - @ -1: ldw.u r0, [r2] - adr r19, ret_from_exception - adr lr, 209f - @ - @ fallthrough to call do_uc_f64 - @ -/* - * Check whether the instruction is a co-processor instruction. - * If yes, we need to call the relevant co-processor handler. - * - * Note that we don't do a full check here for the co-processor - * instructions; all instructions with bit 27 set are well - * defined. The only instructions that should fault are the - * co-processor instructions. - * - * Emulators may wish to make use of the following registers: - * r0 = instruction opcode. - * r2 = PC - * r19 = normal "successful" return address - * r20 = this threads thread_info structure. - * lr = unrecognised instruction return address - */ - get_thread_info r20 @ get current thread - and r8, r0, #0x00003c00 @ mask out CP number - mov r7, #1 - stb r7, [r20+], #TI_USED_CP + 2 @ set appropriate used_cp[] - - @ F64 hardware support entry point. - @ r0 = faulted instruction - @ r19 = return address - @ r20 = fp_state - enable_irq r4 - add r20, r20, #TI_FPSTATE @ r20 = workspace - cff r1, s31 @ get fpu FPSCR - andn r2, r1, #0x08000000 - ctf r2, s31 @ clear 27 bit - mov r2, sp @ nothing stacked - regdump is at TOS - mov lr, r19 @ setup for a return to the user code - - @ Now call the C code to package up the bounce to the support code - @ r0 holds the trigger instruction - @ r1 holds the FPSCR value - @ r2 pointer to register dump - b ucf64_exchandler -209: -#endif - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context asr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. - @ - movc r1, p0.c3, #0 @ get FSR - movc r0, p0.c4, #0 @ get FAR - - @ - @ INTRs on, then call the main handler - @ - enable_irq r2 - mov r2, sp - adr lr, ret_from_exception - b do_DataAbort -ENDPROC(__dabt_user) - - .align 5 -__intr_user: - user_entry - - get_thread_info tsk - - intr_handler - - mov why, #0 - b ret_to_user -ENDPROC(__intr_user) - - .ltorg - - .align 5 -__extn_user: - user_entry - - mov r0, sp - mov r1, asr - b bad_mode -ENDPROC(__extn_user) - - .align 5 -__pabt_user: - user_entry - - mov r0, r2 @ pass address of aborted instruction. - mov r1, #5 - enable_irq r1 @ Enable interrupts - mov r2, sp @ regs - b.l do_PrefetchAbort @ call abort handler - /* fall through */ -/* - * This is the return code to user mode for abort handlers - */ -ENTRY(ret_from_exception) - get_thread_info tsk - mov why, #0 - b ret_to_user -ENDPROC(__pabt_user) -ENDPROC(ret_from_exception) - -/* - * Register switch for UniCore V2 processors - * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info - * previous and next are guaranteed not to be the same. - */ -ENTRY(__switch_to) - add ip, r1, #TI_CPU_SAVE - stm.w (r4 - r15), [ip]+ - stm.w (r16 - r27, sp, lr), [ip]+ - -#ifdef CONFIG_UNICORE_FPU_F64 - add ip, r1, #TI_FPSTATE - sfm.w (f0 - f7 ), [ip]+ - sfm.w (f8 - f15), [ip]+ - sfm.w (f16 - f23), [ip]+ - sfm.w (f24 - f31), [ip]+ - cff r4, s31 - stw r4, [ip] - - add ip, r2, #TI_FPSTATE - lfm.w (f0 - f7 ), [ip]+ - lfm.w (f8 - f15), [ip]+ - lfm.w (f16 - f23), [ip]+ - lfm.w (f24 - f31), [ip]+ - ldw r4, [ip] - ctf r4, s31 -#endif - add ip, r2, #TI_CPU_SAVE - ldm.w (r4 - r15), [ip]+ - ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously -ENDPROC(__switch_to) - - .align 5 -/* - * This is the fast syscall return path. We do as little as - * possible here, and this includes saving r0 back into the PRIV - * stack. - */ -ret_fast_syscall: - disable_irq r1 @ disable interrupts - ldw r1, [tsk+], #TI_FLAGS - cand.a r1, #_TIF_WORK_MASK - bne fast_work_pending - - @ fast_restore_user_regs - restore_user_regs fast = 1, offset = S_OFF - -/* - * Ok, we need to do extra processing, enter the slow path. - */ -fast_work_pending: - stw.w r0, [sp+], #S_R0+S_OFF @ returned r0 -work_pending: - cand.a r1, #_TIF_NEED_RESCHED - bne work_resched - mov r0, sp @ 'regs' - mov r2, why @ 'syscall' - cand.a r1, #_TIF_SIGPENDING @ delivering a signal? - cmovne why, #0 @ prevent further restarts - b.l do_notify_resume - b ret_slow_syscall @ Check work again - -work_resched: - b.l schedule -/* - * "slow" syscall return path. "why" tells us if this was a real syscall. - */ -ENTRY(ret_to_user) -ret_slow_syscall: - disable_irq r1 @ disable interrupts - get_thread_info tsk @ epip4d, one path error?! - ldw r1, [tsk+], #TI_FLAGS - cand.a r1, #_TIF_WORK_MASK - bne work_pending -no_work_pending: - @ slow_restore_user_regs - restore_user_regs fast = 0, offset = 0 -ENDPROC(ret_to_user) - -/* - * This is how we return from a fork. - */ -ENTRY(ret_from_fork) - b.l schedule_tail - b ret_slow_syscall -ENDPROC(ret_from_fork) - -ENTRY(ret_from_kernel_thread) - b.l schedule_tail - mov r0, r5 - adr lr, ret_slow_syscall - mov pc, r4 -ENDPROC(ret_from_kernel_thread) - -/*============================================================================= - * SWI handler - *----------------------------------------------------------------------------- - */ - .align 5 -ENTRY(vector_swi) - sub sp, sp, #S_FRAME_SIZE - stm (r0 - r15), [sp]+ @ Calling r0 - r15 - add r8, sp, #S_R16 - stm (r16 - r28), [r8]+ @ Calling r16 - r28 - add r8, sp, #S_PC - stur (sp, lr), [r8-] @ Calling sp, lr - mov r8, bsr @ called from non-REAL mode - stw lr, [sp+], #S_PC @ Save calling PC - stw r8, [sp+], #S_PSR @ Save ASR - stw r0, [sp+], #S_OLD_R0 @ Save OLD_R0 - zero_fp - - /* - * Get the system call number. - */ - sub ip, lr, #4 - ldw.u scno, [ip] @ get SWI instruction - -#ifdef CONFIG_ALIGNMENT_TRAP - ldw ip, __cr_alignment - ldw ip, [ip] - movc p0.c1, ip, #0 @ update control register -#endif - enable_irq ip - - get_thread_info tsk - ldw tbl, =sys_call_table @ load syscall table pointer - - andn scno, scno, #0xff000000 @ mask off SWI op-code - andn scno, scno, #0x00ff0000 @ mask off SWI op-code - - stm.w (r4, r5), [sp-] @ push fifth and sixth args - ldw ip, [tsk+], #TI_FLAGS @ check for syscall tracing - cand.a ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? - bne __sys_trace - - csub.a scno, #__NR_syscalls @ check upper syscall limit - adr lr, ret_fast_syscall @ return address - bea 1f - ldw pc, [tbl+], scno << #2 @ call sys_* routine -1: - add r1, sp, #S_OFF -2: mov why, #0 @ no longer a real syscall - b sys_ni_syscall @ not private func - - /* - * This is the really slow path. We're going to be doing - * context switches, and waiting for our parent to respond. - */ -__sys_trace: - mov r2, scno - add r1, sp, #S_OFF - mov r0, #0 @ trace entry [IP = 0] - b.l syscall_trace - - adr lr, __sys_trace_return @ return address - mov scno, r0 @ syscall number (possibly new) - add r1, sp, #S_R0 + S_OFF @ pointer to regs - csub.a scno, #__NR_syscalls @ check upper syscall limit - bea 2b - ldm (r0 - r3), [r1]+ @ have to reload r0 - r3 - ldw pc, [tbl+], scno << #2 @ call sys_* routine - -__sys_trace_return: - stw.w r0, [sp+], #S_R0 + S_OFF @ save returned r0 - mov r2, scno - mov r1, sp - mov r0, #1 @ trace exit [IP = 1] - b.l syscall_trace - b ret_slow_syscall - - .align 5 -#ifdef CONFIG_ALIGNMENT_TRAP - .type __cr_alignment, #object -__cr_alignment: - .word cr_alignment -#endif - .ltorg - -ENTRY(sys_rt_sigreturn) - add r0, sp, #S_OFF - mov why, #0 @ prevent syscall restart handling - b __sys_rt_sigreturn -ENDPROC(sys_rt_sigreturn) - - __INIT - -/* - * Vector stubs. - * - * This code is copied to 0xffff0200 so we can use branches in the - * vectors, rather than ldr's. Note that this code must not - * exceed 0x300 bytes. - * - * Common stub entry macro: - * Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC - * - * SP points to a minimal amount of processor-private memory, the address - * of which is copied into r0 for the mode specific abort handler. - */ - .macro vector_stub, name, mode - .align 5 - -vector_\name: - @ - @ Save r0, lr_<exception> (parent PC) and bsr_<exception> - @ (parent ASR) - @ - stw r0, [sp] - stw lr, [sp+], #4 @ save r0, lr - mov lr, bsr - stw lr, [sp+], #8 @ save bsr - - @ - @ Prepare for PRIV mode. INTRs remain disabled. - @ - mov r0, asr - xor r0, r0, #(\mode ^ PRIV_MODE) - mov.a bsr, r0 - - @ - @ the branch table must immediately follow this code - @ - and lr, lr, #0x03 - add lr, lr, #1 - mov r0, sp - ldw lr, [pc+], lr << #2 - mov.a pc, lr @ branch to handler in PRIV mode -ENDPROC(vector_\name) - .align 2 - @ handler addresses follow this label - .endm - - .globl __stubs_start -__stubs_start: -/* - * Interrupt dispatcher - */ - vector_stub intr, INTR_MODE - - .long __intr_user @ 0 (USER) - .long __invalid @ 1 - .long __invalid @ 2 - .long __intr_priv @ 3 (PRIV) - -/* - * Data abort dispatcher - * Enter in ABT mode, bsr = USER ASR, lr = USER PC - */ - vector_stub dabt, ABRT_MODE - - .long __dabt_user @ 0 (USER) - .long __invalid @ 1 - .long __invalid @ 2 (INTR) - .long __dabt_priv @ 3 (PRIV) - -/* - * Prefetch abort dispatcher - * Enter in ABT mode, bsr = USER ASR, lr = USER PC - */ - vector_stub pabt, ABRT_MODE - - .long __pabt_user @ 0 (USER) - .long __invalid @ 1 - .long __invalid @ 2 (INTR) - .long __pabt_priv @ 3 (PRIV) - -/* - * Undef instr entry dispatcher - * Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC - */ - vector_stub extn, EXTN_MODE - - .long __extn_user @ 0 (USER) - .long __invalid @ 1 - .long __invalid @ 2 (INTR) - .long __extn_priv @ 3 (PRIV) - -/* - * We group all the following data together to optimise - * for CPUs with separate I & D caches. - */ - .align 5 - -.LCvswi: - .word vector_swi - - .globl __stubs_end -__stubs_end: - - .equ stubs_offset, __vectors_start + 0x200 - __stubs_start - - .globl __vectors_start -__vectors_start: - jepriv SYS_ERROR0 - b vector_extn + stubs_offset - ldw pc, .LCvswi + stubs_offset - b vector_pabt + stubs_offset - b vector_dabt + stubs_offset - jepriv SYS_ERROR0 - b vector_intr + stubs_offset - jepriv SYS_ERROR0 - - .globl __vectors_end -__vectors_end: - - .data - - .globl cr_alignment - .globl cr_no_alignment -cr_alignment: - .space 4 -cr_no_alignment: - .space 4 diff --git a/arch/unicore32/kernel/fpu-ucf64.c b/arch/unicore32/kernel/fpu-ucf64.c deleted file mode 100644 index 85f0af29d29b..000000000000 --- a/arch/unicore32/kernel/fpu-ucf64.c +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/fpu-ucf64.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched/signal.h> -#include <linux/init.h> - -#include <asm/fpu-ucf64.h> - -/* - * A special flag to tell the normalisation code not to normalise. - */ -#define F64_NAN_FLAG 0x100 - -/* - * A bit pattern used to indicate the initial (unset) value of the - * exception mask, in case nothing handles an instruction. This - * doesn't include the NAN flag, which get masked out before - * we check for an error. - */ -#define F64_EXCEPTION_ERROR ((u32)-1 & ~F64_NAN_FLAG) - -/* - * Since we aren't building with -mfpu=f64, we need to code - * these instructions using their MRC/MCR equivalents. - */ -#define f64reg(_f64_) #_f64_ - -#define cff(_f64_) ({ \ - u32 __v; \ - asm("cff %0, " f64reg(_f64_) "@ fmrx %0, " #_f64_ \ - : "=r" (__v) : : "cc"); \ - __v; \ - }) - -#define ctf(_f64_, _var_) \ - asm("ctf %0, " f64reg(_f64_) "@ fmxr " #_f64_ ", %0" \ - : : "r" (_var_) : "cc") - -/* - * Raise a SIGFPE for the current process. - * sicode describes the signal being raised. - */ -void ucf64_raise_sigfpe(struct pt_regs *regs) -{ - /* - * This is the same as NWFPE, because it's not clear what - * this is used for - */ - current->thread.error_code = 0; - current->thread.trap_no = 6; - - send_sig_fault(SIGFPE, FPE_FLTUNK, - (void __user *)(instruction_pointer(regs) - 4), - current); -} - -/* - * Handle exceptions of UniCore-F64. - */ -void ucf64_exchandler(u32 inst, u32 fpexc, struct pt_regs *regs) -{ - u32 tmp = fpexc; - u32 exc = F64_EXCEPTION_ERROR & fpexc; - - pr_debug("UniCore-F64: instruction %08x fpscr %08x\n", - inst, fpexc); - - if (exc & FPSCR_CMPINSTR_BIT) { - if (exc & FPSCR_CON) - tmp |= FPSCR_CON; - else - tmp &= ~(FPSCR_CON); - exc &= ~(FPSCR_CMPINSTR_BIT | FPSCR_CON); - } else { - pr_debug("UniCore-F64 Error: unhandled exceptions\n"); - pr_debug("UniCore-F64 FPSCR 0x%08x INST 0x%08x\n", - cff(FPSCR), inst); - - ucf64_raise_sigfpe(regs); - return; - } - - /* - * Update the FPSCR with the additional exception flags. - * Comparison instructions always return at least one of - * these flags set. - */ - tmp &= ~(FPSCR_TRAP | FPSCR_IOS | FPSCR_OFS | FPSCR_UFS | - FPSCR_IXS | FPSCR_HIS | FPSCR_IOC | FPSCR_OFC | - FPSCR_UFC | FPSCR_IXC | FPSCR_HIC); - - tmp |= exc; - ctf(FPSCR, tmp); -} - -/* - * F64 support code initialisation. - */ -static int __init ucf64_init(void) -{ - ctf(FPSCR, 0x0); /* FPSCR_UFE | FPSCR_NDE perhaps better */ - - printk(KERN_INFO "Enable UniCore-F64 support.\n"); - - return 0; -} - -late_initcall(ucf64_init); diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c deleted file mode 100644 index 36d395b54b7c..000000000000 --- a/arch/unicore32/kernel/gpio.c +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/gpio.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ -/* in FPGA, no GPIO support */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio/driver.h> -/* FIXME: needed for gpio_set_value() - convert to use descriptors or hogs */ -#include <linux/gpio.h> -#include <mach/hardware.h> - -#ifdef CONFIG_LEDS -#include <linux/leds.h> -#include <linux/platform_device.h> - -static const struct gpio_led puv3_gpio_leds[] = { - { .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0, - .default_trigger = "heartbeat", }, - { .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1, - .default_trigger = "disk-activity", }, -}; - -static const struct gpio_led_platform_data puv3_gpio_led_data = { - .num_leds = ARRAY_SIZE(puv3_gpio_leds), - .leds = (void *) puv3_gpio_leds, -}; - -static struct platform_device puv3_gpio_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = (void *) &puv3_gpio_led_data, - } -}; - -static int __init puv3_gpio_leds_init(void) -{ - platform_device_register(&puv3_gpio_gpio_leds); - return 0; -} - -device_initcall(puv3_gpio_leds_init); -#endif - -static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return !!(readl(GPIO_GPLR) & GPIO_GPIO(offset)); -} - -static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (value) - writel(GPIO_GPIO(offset), GPIO_GPSR); - else - writel(GPIO_GPIO(offset), GPIO_GPCR); -} - -static int puv3_direction_input(struct gpio_chip *chip, unsigned offset) -{ - unsigned long flags; - - local_irq_save(flags); - writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR); - local_irq_restore(flags); - return 0; -} - -static int puv3_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - unsigned long flags; - - local_irq_save(flags); - puv3_gpio_set(chip, offset, value); - writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR); - local_irq_restore(flags); - return 0; -} - -static struct gpio_chip puv3_gpio_chip = { - .label = "gpio", - .direction_input = puv3_direction_input, - .direction_output = puv3_direction_output, - .set = puv3_gpio_set, - .get = puv3_gpio_get, - .base = 0, - .ngpio = GPIO_MAX + 1, -}; - -void __init puv3_init_gpio(void) -{ - writel(GPIO_DIR, GPIO_GPDR); -#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919) \ - || defined(CONFIG_PUV3_DB0913) - gpio_set_value(GPO_WIFI_EN, 1); - gpio_set_value(GPO_HDD_LED, 1); - gpio_set_value(GPO_VGA_EN, 1); - gpio_set_value(GPO_LCD_EN, 1); - gpio_set_value(GPO_CAM_PWR_EN, 0); - gpio_set_value(GPO_LCD_VCC_EN, 1); - gpio_set_value(GPO_SOFT_OFF, 1); - gpio_set_value(GPO_BT_EN, 1); - gpio_set_value(GPO_FAN_ON, 0); - gpio_set_value(GPO_SPKR, 0); - gpio_set_value(GPO_CPU_HEALTH, 1); - gpio_set_value(GPO_LAN_SEL, 1); -/* - * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel - * gpio_set_value(GPO_SET_V1, 1); - * gpio_set_value(GPO_SET_V2, 1); - */ -#endif - gpiochip_add_data(&puv3_gpio_chip, NULL); -} diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S deleted file mode 100644 index 9bbb8668f9f7..000000000000 --- a/arch/unicore32/kernel/head.S +++ /dev/null @@ -1,249 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/head.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <linux/init.h> - -#include <asm/assembler.h> -#include <asm/ptrace.h> -#include <generated/asm-offsets.h> -#include <asm/memory.h> -#include <asm/thread_info.h> -#include <asm/hwdef-copro.h> -#include <asm/pgtable-hwdef.h> - -#if (PHYS_OFFSET & 0x003fffff) -#error "PHYS_OFFSET must be at an even 4MiB boundary!" -#endif - -#define KERNEL_RAM_VADDR (PAGE_OFFSET + KERNEL_IMAGE_START) -#define KERNEL_RAM_PADDR (PHYS_OFFSET + KERNEL_IMAGE_START) - -#define KERNEL_PGD_PADDR (KERNEL_RAM_PADDR - 0x1000) -#define KERNEL_PGD_VADDR (KERNEL_RAM_VADDR - 0x1000) - -#define KERNEL_START KERNEL_RAM_VADDR -#define KERNEL_END _end - -/* - * swapper_pg_dir is the virtual address of the initial page table. - * We place the page tables 4K below KERNEL_RAM_VADDR. Therefore, we must - * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect - * the least significant 16 bits to be 0x8000, but we could probably - * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000. - */ -#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 -#error KERNEL_RAM_VADDR must start at 0xXXXX8000 -#endif - - .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000 - -/* - * Kernel startup entry point. - * --------------------------- - * - * This is normally called from the decompressor code. The requirements - * are: MMU = off, D-cache = off, I-cache = dont care - * - * This code is mostly position independent, so if you link the kernel at - * 0xc0008000, you call this at __pa(0xc0008000). - */ - __HEAD -ENTRY(stext) - @ set asr - mov r0, #PRIV_MODE @ ensure priv mode - or r0, #PSR_R_BIT | PSR_I_BIT @ disable irqs - mov.a asr, r0 - - @ process identify - movc r0, p0.c0, #0 @ cpuid - movl r1, 0xff00ffff @ mask - movl r2, 0x4d000863 @ value - and r0, r1, r0 - cxor.a r0, r2 - bne __error_p @ invalid processor id - - /* - * Clear the 4K level 1 swapper page table - */ - movl r0, #KERNEL_PGD_PADDR @ page table address - mov r1, #0 - add r2, r0, #0x1000 -101: stw.w r1, [r0]+, #4 - stw.w r1, [r0]+, #4 - stw.w r1, [r0]+, #4 - stw.w r1, [r0]+, #4 - cxor.a r0, r2 - bne 101b - - movl r4, #KERNEL_PGD_PADDR @ page table address - mov r7, #PMD_TYPE_SECT | PMD_PRESENT @ page size: section - or r7, r7, #PMD_SECT_CACHEABLE @ cacheable - or r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC - - /* - * Create identity mapping for first 4MB of kernel to - * cater for the MMU enable. This identity mapping - * will be removed by paging_init(). We use our current program - * counter to determine corresponding section base address. - */ - mov r6, pc - mov r6, r6 >> #22 @ start of kernel section - or r1, r7, r6 << #22 @ flags + kernel base - stw r1, [r4+], r6 << #2 @ identity mapping - - /* - * Now setup the pagetables for our kernel direct - * mapped region. - */ - add r0, r4, #(KERNEL_START & 0xff000000) >> 20 - stw.w r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20 - movl r6, #(KERNEL_END - 1) - add r0, r0, #4 - add r6, r4, r6 >> #20 -102: csub.a r0, r6 - add r1, r1, #1 << 22 - bua 103f - stw.w r1, [r0]+, #4 - b 102b -103: - /* - * Then map first 4MB of ram in case it contains our boot params. - */ - add r0, r4, #PAGE_OFFSET >> 20 - or r6, r7, #(PHYS_OFFSET & 0xffc00000) - stw r6, [r0] - - ldw r15, __switch_data @ address to jump to after - - /* - * Initialise TLB, Caches, and MMU state ready to switch the MMU - * on. - */ - mov r0, #0 - movc p0.c5, r0, #28 @ cache invalidate all - nop8 - movc p0.c6, r0, #6 @ TLB invalidate all - nop8 - - /* - * ..V. .... ..TB IDAM - * ..1. .... ..01 1111 - */ - movl r0, #0x201f @ control register setting - - /* - * Setup common bits before finally enabling the MMU. Essentially - * this is just loading the page table pointer and domain access - * registers. - */ - #ifndef CONFIG_ALIGNMENT_TRAP - andn r0, r0, #CR_A - #endif - #ifdef CONFIG_CPU_DCACHE_DISABLE - andn r0, r0, #CR_D - #endif - #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - andn r0, r0, #CR_B - #endif - #ifdef CONFIG_CPU_ICACHE_DISABLE - andn r0, r0, #CR_I - #endif - - movc p0.c2, r4, #0 @ set pgd - b __turn_mmu_on -ENDPROC(stext) - -/* - * Enable the MMU. This completely changes the structure of the visible - * memory space. You will not be able to trace execution through this. - * - * r0 = cp#0 control register - * r15 = *virtual* address to jump to upon completion - */ - .align 5 -__turn_mmu_on: - mov r0, r0 - movc p0.c1, r0, #0 @ write control reg - nop @ fetch inst by phys addr - mov pc, r15 - nop8 @ fetch inst by phys addr -ENDPROC(__turn_mmu_on) - -/* - * Setup the initial page tables. We only setup the barest - * amount which are required to get the kernel running, which - * generally means mapping in the kernel code. - * - * r9 = cpuid - * r10 = procinfo - * - * Returns: - * r0, r3, r6, r7 corrupted - * r4 = physical page table address - */ - .ltorg - - .align 2 - .type __switch_data, %object -__switch_data: - .long __mmap_switched - .long __bss_start @ r6 - .long _end @ r7 - .long cr_alignment @ r8 - .long init_thread_union + THREAD_START_SP @ sp - -/* - * The following fragment of code is executed with the MMU on in MMU mode, - * and uses absolute addresses; this is not position independent. - * - * r0 = cp#0 control register - */ -__mmap_switched: - adr r3, __switch_data + 4 - - ldm.w (r6, r7, r8), [r3]+ - ldw sp, [r3] - - mov fp, #0 @ Clear BSS (and zero fp) -203: csub.a r6, r7 - bea 204f - stw.w fp, [r6]+,#4 - b 203b -204: - andn r1, r0, #CR_A @ Clear 'A' bit - stm (r0, r1), [r8]+ @ Save control register values - b start_kernel -ENDPROC(__mmap_switched) - -/* - * Exception handling. Something went wrong and we can't proceed. We - * ought to tell the user, but since we don't have any guarantee that - * we're even running on the right architecture, we do virtually nothing. - * - * If CONFIG_DEBUG_LL is set we try to print out something about the error - * and hope for the best (useful if bootloader fails to pass a proper - * machine ID for example). - */ -__error_p: -#ifdef CONFIG_DEBUG_LL - adr r0, str_p1 - b.l printascii - mov r0, r9 - b.l printhex8 - adr r0, str_p2 - b.l printascii -901: nop8 - b 901b -str_p1: .asciz "\nError: unrecognized processor variant (0x" -str_p2: .asciz ").\n" - .align -#endif -ENDPROC(__error_p) - diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c deleted file mode 100644 index 4cdf3c846a2d..000000000000 --- a/arch/unicore32/kernel/hibernate.c +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/hibernate.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/gfp.h> -#include <linux/suspend.h> -#include <linux/memblock.h> -#include <linux/pgtable.h> - -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/sections.h> -#include <asm/suspend.h> - -#include "mach/pm.h" - -/* Pointer to the temporary resume page tables */ -pgd_t *resume_pg_dir; - -struct swsusp_arch_regs swsusp_arch_regs_cpu0; - -/* - * Create a middle page table on a resume-safe page and put a pointer to it in - * the given global directory entry. This only returns the gd entry - * in non-PAE compilation mode, since the middle layer is folded. - */ -static pmd_t *resume_one_md_table_init(pgd_t *pgd) -{ - pud_t *pud; - p4d_t *p4d; - pmd_t *pmd_table; - - p4d = p4d_offset(pgd, 0); - pud = pud_offset(p4d, 0); - pmd_table = pmd_offset(pud, 0); - - return pmd_table; -} - -/* - * Create a page table on a resume-safe page and place a pointer to it in - * a middle page directory entry. - */ -static pte_t *resume_one_page_table_init(pmd_t *pmd) -{ - if (pmd_none(*pmd)) { - pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC); - if (!page_table) - return NULL; - - set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_KERNEL_TABLE)); - - BUG_ON(page_table != pte_offset_kernel(pmd, 0)); - - return page_table; - } - - return pte_offset_kernel(pmd, 0); -} - -/* - * This maps the physical memory to kernel virtual address space, a total - * of max_low_pfn pages, by creating page tables starting from address - * PAGE_OFFSET. The page tables are allocated out of resume-safe pages. - */ -static int resume_physical_mapping_init(pgd_t *pgd_base) -{ - unsigned long pfn; - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - int pgd_idx, pmd_idx; - - pgd_idx = pgd_index(PAGE_OFFSET); - pgd = pgd_base + pgd_idx; - pfn = 0; - - for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) { - pmd = resume_one_md_table_init(pgd); - if (!pmd) - return -ENOMEM; - - if (pfn >= max_low_pfn) - continue; - - for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) { - pte_t *max_pte; - - if (pfn >= max_low_pfn) - break; - - /* Map with normal page tables. - * NOTE: We can mark everything as executable here - */ - pte = resume_one_page_table_init(pmd); - if (!pte) - return -ENOMEM; - - max_pte = pte + PTRS_PER_PTE; - for (; pte < max_pte; pte++, pfn++) { - if (pfn >= max_low_pfn) - break; - - set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC)); - } - } - } - - return 0; -} - -static inline void resume_init_first_level_page_table(pgd_t *pg_dir) -{ -} - -int swsusp_arch_resume(void) -{ - int error; - - resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC); - if (!resume_pg_dir) - return -ENOMEM; - - resume_init_first_level_page_table(resume_pg_dir); - error = resume_physical_mapping_init(resume_pg_dir); - if (error) - return error; - - /* We have got enough memory and from now on we cannot recover */ - restore_image(resume_pg_dir, restore_pblist); - return 0; -} - -/* - * pfn_is_nosave - check if given pfn is in the 'nosave' section - */ - -int pfn_is_nosave(unsigned long pfn) -{ - unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT; - unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT; - - return (pfn >= begin_pfn) && (pfn < end_pfn); -} - -void save_processor_state(void) -{ -} - -void restore_processor_state(void) -{ - local_flush_tlb_all(); -} diff --git a/arch/unicore32/kernel/hibernate_asm.S b/arch/unicore32/kernel/hibernate_asm.S deleted file mode 100644 index a589bc189e24..000000000000 --- a/arch/unicore32/kernel/hibernate_asm.S +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/hibernate_asm.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/sys.h> -#include <linux/errno.h> -#include <linux/linkage.h> -#include <linux/pgtable.h> -#include <generated/asm-offsets.h> -#include <asm/page.h> -#include <asm/assembler.h> - -@ restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist) -@ r0: resume_pg_dir -@ r1: restore_pblist -@ copy restore_pblist pages -@ restore registers from swsusp_arch_regs_cpu0 -@ -ENTRY(restore_image) - sub r0, r0, #PAGE_OFFSET - mov r5, #0 - movc p0.c6, r5, #6 @invalidate ITLB & DTLB - movc p0.c2, r0, #0 - nop - nop - nop - nop - nop - nop - nop - - .p2align 4,,7 -101: - csub.a r1, #0 - beq 109f - - ldw r6, [r1+], #PBE_ADDRESS - ldw r7, [r1+], #PBE_ORIN_ADDRESS - - movl ip, #128 -102: ldm.w (r8 - r15), [r6]+ - stm.w (r8 - r15), [r7]+ - sub.a ip, ip, #1 - bne 102b - - ldw r1, [r1+], #PBE_NEXT - b 101b - - .p2align 4,,7 -109: - /* go back to the original page tables */ - ldw r0, =swapper_pg_dir - sub r0, r0, #PAGE_OFFSET - mov r5, #0 - movc p0.c6, r5, #6 - movc p0.c2, r0, #0 - nop - nop - nop - nop - nop - nop - nop - -#ifdef CONFIG_UNICORE_FPU_F64 - ldw ip, 1f - add ip, ip, #SWSUSP_FPSTATE - lfm.w (f0 - f7 ), [ip]+ - lfm.w (f8 - f15), [ip]+ - lfm.w (f16 - f23), [ip]+ - lfm.w (f24 - f31), [ip]+ - ldw r4, [ip] - ctf r4, s31 -#endif - mov r0, #0x0 - ldw ip, 1f - add ip, ip, #SWSUSP_CPU - ldm.w (r4 - r15), [ip]+ - ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously - - .align 2 -1: .long swsusp_arch_regs_cpu0 - - -@ swsusp_arch_suspend() -@ - prepare pc for resume, return from function without swsusp_save on resume -@ - save registers in swsusp_arch_regs_cpu0 -@ - call swsusp_save write suspend image - -ENTRY(swsusp_arch_suspend) - ldw ip, 1f - add ip, ip, #SWSUSP_CPU - stm.w (r4 - r15), [ip]+ - stm.w (r16 - r27, sp, lr), [ip]+ - -#ifdef CONFIG_UNICORE_FPU_F64 - ldw ip, 1f - add ip, ip, #SWSUSP_FPSTATE - sfm.w (f0 - f7 ), [ip]+ - sfm.w (f8 - f15), [ip]+ - sfm.w (f16 - f23), [ip]+ - sfm.w (f24 - f31), [ip]+ - cff r4, s31 - stw r4, [ip] -#endif - b swsusp_save @ no return - -1: .long swsusp_arch_regs_cpu0 diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c deleted file mode 100644 index c014ae3c3e48..000000000000 --- a/arch/unicore32/kernel/irq.c +++ /dev/null @@ -1,371 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/irq.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/random.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/seq_file.h> -#include <linux/errno.h> -#include <linux/list.h> -#include <linux/kallsyms.h> -#include <linux/proc_fs.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> - -#include "setup.h" - -/* - * PKUnity GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ -static int GPIO_IRQ_rising_edge; -static int GPIO_IRQ_falling_edge; -static int GPIO_IRQ_mask = 0; - -#define GPIO_MASK(irq) (1 << (irq - IRQ_GPIO0)) - -static int puv3_gpio_type(struct irq_data *d, unsigned int type) -{ - unsigned int mask; - - if (d->irq < IRQ_GPIOHIGH) - mask = 1 << d->irq; - else - mask = GPIO_MASK(d->irq); - - if (type == IRQ_TYPE_PROBE) { - if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & IRQ_TYPE_EDGE_RISING) - GPIO_IRQ_rising_edge |= mask; - else - GPIO_IRQ_rising_edge &= ~mask; - if (type & IRQ_TYPE_EDGE_FALLING) - GPIO_IRQ_falling_edge |= mask; - else - GPIO_IRQ_falling_edge &= ~mask; - - writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER); - writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER); - - return 0; -} - -/* - * GPIO IRQs must be acknowledged. This is for IRQs from 0 to 7. - */ -static void puv3_low_gpio_ack(struct irq_data *d) -{ - writel((1 << d->irq), GPIO_GEDR); -} - -static void puv3_low_gpio_mask(struct irq_data *d) -{ - writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR); -} - -static void puv3_low_gpio_unmask(struct irq_data *d) -{ - writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR); -} - -static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on) -{ - if (on) - writel(readl(PM_PWER) | (1 << d->irq), PM_PWER); - else - writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER); - return 0; -} - -static struct irq_chip puv3_low_gpio_chip = { - .name = "GPIO-low", - .irq_ack = puv3_low_gpio_ack, - .irq_mask = puv3_low_gpio_mask, - .irq_unmask = puv3_low_gpio_unmask, - .irq_set_type = puv3_gpio_type, - .irq_set_wake = puv3_low_gpio_wake, -}; - -/* - * IRQ8 (GPIO0 through 27) handler. We enter here with the - * irq_controller_lock held, and IRQs disabled. Decode the IRQ - * and call the handler. - */ -static void puv3_gpio_handler(struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = readl(GPIO_GEDR); - do { - /* - * clear down all currently active IRQ sources. - * We will be processing them all. - */ - writel(mask, GPIO_GEDR); - - irq = IRQ_GPIO0; - do { - if (mask & 1) - generic_handle_irq(irq); - mask >>= 1; - irq++; - } while (mask); - mask = readl(GPIO_GEDR); - } while (mask); -} - -/* - * GPIO0-27 edge IRQs need to be handled specially. - * In addition, the IRQs are all collected up into one bit in the - * interrupt controller registers. - */ -static void puv3_high_gpio_ack(struct irq_data *d) -{ - unsigned int mask = GPIO_MASK(d->irq); - - writel(mask, GPIO_GEDR); -} - -static void puv3_high_gpio_mask(struct irq_data *d) -{ - unsigned int mask = GPIO_MASK(d->irq); - - GPIO_IRQ_mask &= ~mask; - - writel(readl(GPIO_GRER) & ~mask, GPIO_GRER); - writel(readl(GPIO_GFER) & ~mask, GPIO_GFER); -} - -static void puv3_high_gpio_unmask(struct irq_data *d) -{ - unsigned int mask = GPIO_MASK(d->irq); - - GPIO_IRQ_mask |= mask; - - writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER); - writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER); -} - -static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on) -{ - if (on) - writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER); - else - writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER); - return 0; -} - -static struct irq_chip puv3_high_gpio_chip = { - .name = "GPIO-high", - .irq_ack = puv3_high_gpio_ack, - .irq_mask = puv3_high_gpio_mask, - .irq_unmask = puv3_high_gpio_unmask, - .irq_set_type = puv3_gpio_type, - .irq_set_wake = puv3_high_gpio_wake, -}; - -/* - * We don't need to ACK IRQs on the PKUnity unless they're GPIOs - * this is for internal IRQs i.e. from 8 to 31. - */ -static void puv3_mask_irq(struct irq_data *d) -{ - writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR); -} - -static void puv3_unmask_irq(struct irq_data *d) -{ - writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR); -} - -/* - * Apart form GPIOs, only the RTC alarm can be a wakeup event. - */ -static int puv3_set_wake(struct irq_data *d, unsigned int on) -{ - if (d->irq == IRQ_RTCAlarm) { - if (on) - writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER); - else - writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER); - return 0; - } - return -EINVAL; -} - -static struct irq_chip puv3_normal_chip = { - .name = "PKUnity-v3", - .irq_ack = puv3_mask_irq, - .irq_mask = puv3_mask_irq, - .irq_unmask = puv3_unmask_irq, - .irq_set_wake = puv3_set_wake, -}; - -static struct resource irq_resource = { - .name = "irqs", - .start = io_v2p(PKUNITY_INTC_BASE), - .end = io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF, -}; - -static struct puv3_irq_state { - unsigned int saved; - unsigned int icmr; - unsigned int iclr; - unsigned int iccr; -} puv3_irq_state; - -static int puv3_irq_suspend(void) -{ - struct puv3_irq_state *st = &puv3_irq_state; - - st->saved = 1; - st->icmr = readl(INTC_ICMR); - st->iclr = readl(INTC_ICLR); - st->iccr = readl(INTC_ICCR); - - /* - * Disable all GPIO-based interrupts. - */ - writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR); - - /* - * Set the appropriate edges for wakeup. - */ - writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER); - writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER); - - /* - * Clear any pending GPIO interrupts. - */ - writel(readl(GPIO_GEDR), GPIO_GEDR); - - return 0; -} - -static void puv3_irq_resume(void) -{ - struct puv3_irq_state *st = &puv3_irq_state; - - if (st->saved) { - writel(st->iccr, INTC_ICCR); - writel(st->iclr, INTC_ICLR); - - writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER); - writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER); - - writel(st->icmr, INTC_ICMR); - } -} - -static struct syscore_ops puv3_irq_syscore_ops = { - .suspend = puv3_irq_suspend, - .resume = puv3_irq_resume, -}; - -static int __init puv3_irq_init_syscore(void) -{ - register_syscore_ops(&puv3_irq_syscore_ops); - return 0; -} - -device_initcall(puv3_irq_init_syscore); - -void __init init_IRQ(void) -{ - unsigned int irq; - - request_resource(&iomem_resource, &irq_resource); - - /* disable all IRQs */ - writel(0, INTC_ICMR); - - /* all IRQs are IRQ, not REAL */ - writel(0, INTC_ICLR); - - /* clear all GPIO edge detects */ - writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR); - writel(0, GPIO_GFER); - writel(0, GPIO_GRER); - writel(0x0FFFFFFF, GPIO_GEDR); - - writel(1, INTC_ICCR); - - for (irq = 0; irq < IRQ_GPIOHIGH; irq++) { - irq_set_chip(irq, &puv3_low_gpio_chip); - irq_set_handler(irq, handle_edge_irq); - irq_modify_status(irq, - IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN, - 0); - } - - for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) { - irq_set_chip(irq, &puv3_normal_chip); - irq_set_handler(irq, handle_level_irq); - irq_modify_status(irq, - IRQ_NOREQUEST | IRQ_NOAUTOEN, - IRQ_NOPROBE); - } - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) { - irq_set_chip(irq, &puv3_high_gpio_chip); - irq_set_handler(irq, handle_edge_irq); - irq_modify_status(irq, - IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN, - 0); - } - - /* - * Install handler for GPIO 0-27 edge detect interrupts - */ - irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip); - irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler); - -#ifdef CONFIG_PUV3_GPIO - puv3_init_gpio(); -#endif -} - -/* - * do_IRQ handles all hardware IRQ's. Decoded IRQs should not - * come via this function. Instead, they should provide their - * own 'handler' - */ -asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - irq_enter(); - - /* - * Some hardware gives randomly wrong interrupts. Rather - * than crashing, do something sensible. - */ - if (unlikely(irq >= nr_irqs)) { - if (printk_ratelimit()) - printk(KERN_WARNING "Bad IRQ%u\n", irq); - ack_bad_irq(irq); - } else { - generic_handle_irq(irq); - } - - irq_exit(); - set_irq_regs(old_regs); -} - diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c deleted file mode 100644 index 731445008932..000000000000 --- a/arch/unicore32/kernel/ksyms.c +++ /dev/null @@ -1,57 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/ksyms.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/in6.h> -#include <linux/syscalls.h> -#include <linux/uaccess.h> -#include <linux/io.h> - -#include <asm/checksum.h> - -#include "ksyms.h" - -EXPORT_SYMBOL(find_first_bit); -EXPORT_SYMBOL(find_first_zero_bit); -EXPORT_SYMBOL(find_next_zero_bit); -EXPORT_SYMBOL(find_next_bit); - - /* platform dependent support */ -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__const_udelay); - - /* string / mem functions */ -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memchr); - - /* user mem (segment) */ -EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(__strncpy_from_user); - -EXPORT_SYMBOL(copy_page); - -EXPORT_SYMBOL(raw_copy_from_user); -EXPORT_SYMBOL(raw_copy_to_user); -EXPORT_SYMBOL(__clear_user); - -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__divsi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__modsi3); -EXPORT_SYMBOL(__ucmpdi2); -EXPORT_SYMBOL(__udivsi3); -EXPORT_SYMBOL(__umodsi3); - diff --git a/arch/unicore32/kernel/ksyms.h b/arch/unicore32/kernel/ksyms.h deleted file mode 100644 index 5d2d5ba324ac..000000000000 --- a/arch/unicore32/kernel/ksyms.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * libgcc functions - functions that are used internally by the - * compiler... (prototypes are not correct though, but that - * doesn't really matter since they're not versioned). - */ -extern void __ashldi3(void); -extern void __ashrdi3(void); -extern void __divsi3(void); -extern void __lshrdi3(void); -extern void __modsi3(void); -extern void __ucmpdi2(void); -extern void __udivsi3(void); -extern void __umodsi3(void); diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c deleted file mode 100644 index 67c89ef2d6ee..000000000000 --- a/arch/unicore32/kernel/module.c +++ /dev/null @@ -1,105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/module.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/moduleloader.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/gfp.h> - -#include <asm/sections.h> - -void *module_alloc(unsigned long size) -{ - return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END, - GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, - __builtin_return_address(0)); -} - -int -apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, - unsigned int relindex, struct module *module) -{ - Elf32_Shdr *symsec = sechdrs + symindex; - Elf32_Shdr *relsec = sechdrs + relindex; - Elf32_Shdr *dstsec = sechdrs + relsec->sh_info; - Elf32_Rel *rel = (void *)relsec->sh_addr; - unsigned int i; - - for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) { - unsigned long loc; - Elf32_Sym *sym; - s32 offset; - - offset = ELF32_R_SYM(rel->r_info); - if (offset < 0 || offset > - (symsec->sh_size / sizeof(Elf32_Sym))) { - printk(KERN_ERR "%s: bad relocation, " - "section %d reloc %d\n", - module->name, relindex, i); - return -ENOEXEC; - } - - sym = ((Elf32_Sym *)symsec->sh_addr) + offset; - - if (rel->r_offset < 0 || rel->r_offset > - dstsec->sh_size - sizeof(u32)) { - printk(KERN_ERR "%s: out of bounds relocation, " - "section %d reloc %d offset %d size %d\n", - module->name, relindex, i, rel->r_offset, - dstsec->sh_size); - return -ENOEXEC; - } - - loc = dstsec->sh_addr + rel->r_offset; - - switch (ELF32_R_TYPE(rel->r_info)) { - case R_UNICORE_NONE: - /* ignore */ - break; - - case R_UNICORE_ABS32: - *(u32 *)loc += sym->st_value; - break; - - case R_UNICORE_PC24: - case R_UNICORE_CALL: - case R_UNICORE_JUMP24: - offset = (*(u32 *)loc & 0x00ffffff) << 2; - if (offset & 0x02000000) - offset -= 0x04000000; - - offset += sym->st_value - loc; - if (offset & 3 || - offset <= (s32)0xfe000000 || - offset >= (s32)0x02000000) { - printk(KERN_ERR - "%s: relocation out of range, section " - "%d reloc %d sym '%s'\n", module->name, - relindex, i, strtab + sym->st_name); - return -ENOEXEC; - } - - offset >>= 2; - - *(u32 *)loc &= 0xff000000; - *(u32 *)loc |= offset & 0x00ffffff; - break; - - default: - printk(KERN_ERR "%s: unknown relocation: %u\n", - module->name, ELF32_R_TYPE(rel->r_info)); - return -ENOEXEC; - } - } - return 0; -} diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c deleted file mode 100644 index 0d098aa05b47..000000000000 --- a/arch/unicore32/kernel/pci.c +++ /dev/null @@ -1,371 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/pci.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * PCI bios-type initialisation for PCI machines - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/io.h> - -static int debug_pci; - -#define CONFIG_CMD(bus, devfn, where) \ - (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -static int -puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR); - switch (size) { - case 1: - *value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF; - break; - case 2: - *value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF; - break; - case 4: - *value = readl(PCICFG_DATA); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int -puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR); - switch (size) { - case 1: - writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8)) - | FIELD(value, 8, (where&3)*8), PCICFG_DATA); - break; - case 2: - writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8)) - | FIELD(value, 16, (where&2)*8), PCICFG_DATA); - break; - case 4: - writel(value, PCICFG_DATA); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops pci_puv3_ops = { - .read = puv3_read_config, - .write = puv3_write_config, -}; - -void pci_puv3_preinit(void) -{ - printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n"); - /* config PCI bridge base */ - writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE); - - writel(0, PCIBRI_AHBCTL0); - writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0); - writel(0xFFFF0000, PCIBRI_AHBAMR0); - writel(0, PCIBRI_AHBTAR0); - - writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1); - writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1); - writel(0xFFFF0000, PCIBRI_AHBAMR1); - writel(0x00000000, PCIBRI_AHBTAR1); - - writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2); - writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2); - writel(0xF8000000, PCIBRI_AHBAMR2); - writel(0, PCIBRI_AHBTAR2); - - writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1); - - writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0); - writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0); - writel(0xF8000000, PCIBRI_PCIAMR0); - writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0); - - writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD); -} - -static int pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (dev->bus->number == 0) { -#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */ - if (dev->devfn == 0x00) - return IRQ_PCIINTA; - else if (dev->devfn == 0x08) - return IRQ_PCIINTB; - else if (dev->devfn == 0x10) - return IRQ_PCIINTC; - else if (dev->devfn == 0x18) - return IRQ_PCIINTD; -#endif -#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */ - if (dev->devfn == 0x30) - return IRQ_PCIINTB; - else if (dev->devfn == 0x60) - return IRQ_PCIINTC; - else if (dev->devfn == 0x58) - return IRQ_PCIINTD; -#endif -#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919) - /* only support 2 pci devices */ - if (dev->devfn == 0x00) - return IRQ_PCIINTC; /* sata */ -#endif - } - return -1; -} - -/* - * Only first 128MB of memory can be accessed via PCI. - * We use GFP_DMA to allocate safe buffers to do map/unmap. - * This is really ugly and we need a better way of specifying - * DMA-capable regions of memory. - */ -void __init puv3_pci_adjust_zones(unsigned long max_zone_pfn) -{ - unsigned int sz = SZ_128M >> PAGE_SHIFT; - - max_zone_pfn[ZONE_DMA] = sz; -} - -/* - * If the bus contains any of these devices, then we must not turn on - * parity checking of any kind. - */ -static inline int pdev_bad_for_parity(struct pci_dev *dev) -{ - return 0; -} - -/* - * pcibios_fixup_bus - Called after each bus is probed, - * but before its children are examined. - */ -void pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev; - u16 features = PCI_COMMAND_SERR - | PCI_COMMAND_PARITY - | PCI_COMMAND_FAST_BACK; - - bus->resource[0] = &ioport_resource; - bus->resource[1] = &iomem_resource; - - /* - * Walk the devices on this bus, working out what we can - * and can't support. - */ - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 status; - - pci_read_config_word(dev, PCI_STATUS, &status); - - /* - * If any device on this bus does not support fast back - * to back transfers, then the bus as a whole is not able - * to support them. Having fast back to back transfers - * on saves us one PCI cycle per transaction. - */ - if (!(status & PCI_STATUS_FAST_BACK)) - features &= ~PCI_COMMAND_FAST_BACK; - - if (pdev_bad_for_parity(dev)) - features &= ~(PCI_COMMAND_SERR - | PCI_COMMAND_PARITY); - - switch (dev->class >> 8) { - case PCI_CLASS_BRIDGE_PCI: - pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status); - status |= PCI_BRIDGE_CTL_PARITY - | PCI_BRIDGE_CTL_MASTER_ABORT; - status &= ~(PCI_BRIDGE_CTL_BUS_RESET - | PCI_BRIDGE_CTL_FAST_BACK); - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status); - break; - - case PCI_CLASS_BRIDGE_CARDBUS: - pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL, - &status); - status |= PCI_CB_BRIDGE_CTL_PARITY - | PCI_CB_BRIDGE_CTL_MASTER_ABORT; - pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL, - status); - break; - } - } - - /* - * Now walk the devices again, this time setting them up. - */ - list_for_each_entry(dev, &bus->devices, bus_list) { - u16 cmd; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= features; - pci_write_config_word(dev, PCI_COMMAND, cmd); - - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, - L1_CACHE_BYTES >> 2); - } - - /* - * Propagate the flags to the PCI bridge. - */ - if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - if (features & PCI_COMMAND_FAST_BACK) - bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK; - if (features & PCI_COMMAND_PARITY) - bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY; - } - - /* - * Report what we did for this bus - */ - printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", - bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); -} -EXPORT_SYMBOL(pcibios_fixup_bus); - -static struct resource busn_resource = { - .name = "PCI busn", - .start = 0, - .end = 255, - .flags = IORESOURCE_BUS, -}; - -static int __init pci_common_init(void) -{ - struct pci_bus *puv3_bus; - struct pci_host_bridge *bridge; - int ret; - - bridge = pci_alloc_host_bridge(0); - if (!bridge) - return -ENOMEM; - - pci_puv3_preinit(); - - pci_add_resource(&bridge->windows, &ioport_resource); - pci_add_resource(&bridge->windows, &iomem_resource); - pci_add_resource(&bridge->windows, &busn_resource); - bridge->sysdata = NULL; - bridge->busnr = 0; - bridge->ops = &pci_puv3_ops; - bridge->swizzle_irq = pci_common_swizzle; - bridge->map_irq = pci_puv3_map_irq; - - /* Scan our single hose. */ - ret = pci_scan_root_bus_bridge(bridge); - if (ret) { - pci_free_host_bridge(bridge); - return; - } - - puv3_bus = bridge->bus; - - if (!puv3_bus) - panic("PCI: unable to scan bus!"); - - pci_bus_size_bridges(puv3_bus); - pci_bus_assign_resources(puv3_bus); - pci_bus_add_devices(puv3_bus); - return 0; -} -subsys_initcall(pci_common_init); - -char * __init pcibios_setup(char *str) -{ - if (!strcmp(str, "debug")) { - debug_pci = 1; - return NULL; - } - return str; -} - -void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -/* - * From arch/i386/kernel/pci-i386.c: - * - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - * - * Why? Because some silly external IO cards only decode - * the low 10 bits of the IO address. The 0x00-0xff region - * is reserved for motherboard devices that decode all 16 - * bits, so it's ok to allocate at, say, 0x2800-0x28ff, - * but we want to try to avoid allocating at 0x2900-0x2bff - * which might be mirrored at 0x0100-0x03ff.. - */ -resource_size_t pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) -{ - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO && start & 0x300) - start = (start + 0x3ff) & ~0x3ff; - - start = (start + align - 1) & ~(align - 1); - - return start; -} - -/** - * pcibios_enable_device - Enable I/O and memory. - * @dev: PCI device to be enabled - */ -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx = 0; idx < 6; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1 << idx))) - continue; - - r = dev->resource + idx; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because" - " of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - - /* - * Bridges (eg, cardbus bridges) need to be fully enabled - */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) - cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - - if (cmd != old_cmd) { - printk("PCI: enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} diff --git a/arch/unicore32/kernel/pm.c b/arch/unicore32/kernel/pm.c deleted file mode 100644 index 94b7f9df6c1a..000000000000 --- a/arch/unicore32/kernel/pm.c +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/pm.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/suspend.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/pm.h> - -#include "setup.h" - -struct puv3_cpu_pm_fns *puv3_cpu_pm_fns; -static unsigned long *sleep_save; - -int puv3_pm_enter(suspend_state_t state) -{ - unsigned long sleep_save_checksum = 0, checksum = 0; - int i; - - /* skip registers saving for standby */ - if (state != PM_SUSPEND_STANDBY) { - puv3_cpu_pm_fns->save(sleep_save); - /* before sleeping, calculate and save a checksum */ - for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++) - sleep_save_checksum += sleep_save[i]; - } - - /* *** go zzz *** */ - puv3_cpu_pm_fns->enter(state); - cpu_init(); -#ifdef CONFIG_INPUT_KEYBOARD - puv3_ps2_init(); -#endif -#ifdef CONFIG_PCI - pci_puv3_preinit(); -#endif - if (state != PM_SUSPEND_STANDBY) { - /* after sleeping, validate the checksum */ - for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++) - checksum += sleep_save[i]; - - /* if invalid, display message and wait for a hardware reset */ - if (checksum != sleep_save_checksum) { - while (1) - puv3_cpu_pm_fns->enter(state); - } - puv3_cpu_pm_fns->restore(sleep_save); - } - - pr_debug("*** made it back from resume\n"); - - return 0; -} -EXPORT_SYMBOL_GPL(puv3_pm_enter); - -unsigned long sleep_phys_sp(void *sp) -{ - return virt_to_phys(sp); -} - -static int puv3_pm_valid(suspend_state_t state) -{ - if (puv3_cpu_pm_fns) - return puv3_cpu_pm_fns->valid(state); - - return -EINVAL; -} - -static int puv3_pm_prepare(void) -{ - int ret = 0; - - if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare) - ret = puv3_cpu_pm_fns->prepare(); - - return ret; -} - -static void puv3_pm_finish(void) -{ - if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish) - puv3_cpu_pm_fns->finish(); -} - -static struct platform_suspend_ops puv3_pm_ops = { - .valid = puv3_pm_valid, - .enter = puv3_pm_enter, - .prepare = puv3_pm_prepare, - .finish = puv3_pm_finish, -}; - -static int __init puv3_pm_init(void) -{ - if (!puv3_cpu_pm_fns) { - printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n"); - return -EINVAL; - } - - sleep_save = kmalloc_array(puv3_cpu_pm_fns->save_count, - sizeof(unsigned long), - GFP_KERNEL); - if (!sleep_save) { - printk(KERN_ERR "failed to alloc memory for pm save\n"); - return -ENOMEM; - } - - suspend_set_ops(&puv3_pm_ops); - return 0; -} - -device_initcall(puv3_pm_init); diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c deleted file mode 100644 index b4fd3a604a18..000000000000 --- a/arch/unicore32/kernel/process.c +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/process.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <stdarg.h> - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/sched/task.h> -#include <linux/sched/task_stack.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/delay.h> -#include <linux/reboot.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/cpu.h> -#include <linux/elfcore.h> -#include <linux/pm.h> -#include <linux/tick.h> -#include <linux/utsname.h> -#include <linux/uaccess.h> -#include <linux/random.h> -#include <linux/gpio.h> -#include <linux/stacktrace.h> - -#include <asm/cacheflush.h> -#include <asm/processor.h> -#include <asm/stacktrace.h> - -#include "setup.h" - -static const char * const processor_modes[] = { - "UK00", "UK01", "UK02", "UK03", "UK04", "UK05", "UK06", "UK07", - "UK08", "UK09", "UK0A", "UK0B", "UK0C", "UK0D", "UK0E", "UK0F", - "USER", "REAL", "INTR", "PRIV", "UK14", "UK15", "UK16", "ABRT", - "UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR" -}; - -void arch_cpu_idle(void) -{ - cpu_do_idle(); - local_irq_enable(); -} - -void machine_halt(void) -{ - gpio_set_value(GPO_SOFT_OFF, 0); -} - -/* - * Function pointers to optional machine specific functions - */ -void (*pm_power_off)(void) = NULL; -EXPORT_SYMBOL(pm_power_off); - -void machine_power_off(void) -{ - if (pm_power_off) - pm_power_off(); - machine_halt(); -} - -void machine_restart(char *cmd) -{ - /* Disable interrupts first */ - local_irq_disable(); - - /* - * Tell the mm system that we are going to reboot - - * we may need it to insert some 1:1 mappings so that - * soft boot works. - */ - setup_mm_for_reboot(); - - /* Clean and invalidate caches */ - flush_cache_all(); - - /* Turn off caching */ - cpu_proc_fin(); - - /* Push out any further dirty data, and ensure cache is empty */ - flush_cache_all(); - - /* - * Now handle reboot code. - */ - if (reboot_mode == REBOOT_SOFT) { - /* Jump into ROM at address 0xffff0000 */ - cpu_reset(VECTORS_BASE); - } else { - writel(0x00002001, PM_PLLSYSCFG); /* cpu clk = 250M */ - writel(0x00100800, PM_PLLDDRCFG); /* ddr clk = 44M */ - writel(0x00002001, PM_PLLVGACFG); /* vga clk = 250M */ - - /* Use on-chip reset capability */ - /* following instructions must be in one icache line */ - __asm__ __volatile__( - " .align 5\n\t" - " stw %1, [%0]\n\t" - "201: ldw r0, [%0]\n\t" - " cmpsub.a r0, #0\n\t" - " bne 201b\n\t" - " stw %3, [%2]\n\t" - " nop; nop; nop\n\t" - /* prefetch 3 instructions at most */ - : - : "r" (PM_PMCR), - "r" (PM_PMCR_CFBSYS | PM_PMCR_CFBDDR - | PM_PMCR_CFBVGA), - "r" (RESETC_SWRR), - "r" (RESETC_SWRR_SRB) - : "r0", "memory"); - } - - /* - * Whoops - the architecture was unable to reboot. - * Tell the user! - */ - mdelay(1000); - printk(KERN_EMERG "Reboot failed -- System halted\n"); - do { } while (1); -} - -void __show_regs(struct pt_regs *regs) -{ - unsigned long flags; - char buf[64]; - - show_regs_print_info(KERN_DEFAULT); - printk("PC is at %pS\n", (void *)instruction_pointer(regs)); - printk("LR is at %pS\n", (void *)regs->UCreg_lr); - printk(KERN_DEFAULT "pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n" - "sp : %08lx ip : %08lx fp : %08lx\n", - regs->UCreg_pc, regs->UCreg_lr, regs->UCreg_asr, - regs->UCreg_sp, regs->UCreg_ip, regs->UCreg_fp); - printk(KERN_DEFAULT "r26: %08lx r25: %08lx r24: %08lx\n", - regs->UCreg_26, regs->UCreg_25, - regs->UCreg_24); - printk(KERN_DEFAULT "r23: %08lx r22: %08lx r21: %08lx r20: %08lx\n", - regs->UCreg_23, regs->UCreg_22, - regs->UCreg_21, regs->UCreg_20); - printk(KERN_DEFAULT "r19: %08lx r18: %08lx r17: %08lx r16: %08lx\n", - regs->UCreg_19, regs->UCreg_18, - regs->UCreg_17, regs->UCreg_16); - printk(KERN_DEFAULT "r15: %08lx r14: %08lx r13: %08lx r12: %08lx\n", - regs->UCreg_15, regs->UCreg_14, - regs->UCreg_13, regs->UCreg_12); - printk(KERN_DEFAULT "r11: %08lx r10: %08lx r9 : %08lx r8 : %08lx\n", - regs->UCreg_11, regs->UCreg_10, - regs->UCreg_09, regs->UCreg_08); - printk(KERN_DEFAULT "r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", - regs->UCreg_07, regs->UCreg_06, - regs->UCreg_05, regs->UCreg_04); - printk(KERN_DEFAULT "r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", - regs->UCreg_03, regs->UCreg_02, - regs->UCreg_01, regs->UCreg_00); - - flags = regs->UCreg_asr; - buf[0] = flags & PSR_S_BIT ? 'S' : 's'; - buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z'; - buf[2] = flags & PSR_C_BIT ? 'C' : 'c'; - buf[3] = flags & PSR_V_BIT ? 'V' : 'v'; - buf[4] = '\0'; - - printk(KERN_DEFAULT "Flags: %s INTR o%s REAL o%s Mode %s Segment %s\n", - buf, interrupts_enabled(regs) ? "n" : "ff", - fast_interrupts_enabled(regs) ? "n" : "ff", - processor_modes[processor_mode(regs)], - uaccess_kernel() ? "kernel" : "user"); - { - unsigned int ctrl; - - buf[0] = '\0'; - { - unsigned int transbase; - asm("movc %0, p0.c2, #0\n" - : "=r" (transbase)); - snprintf(buf, sizeof(buf), " Table: %08x", transbase); - } - asm("movc %0, p0.c1, #0\n" : "=r" (ctrl)); - - printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf); - } -} - -void show_regs(struct pt_regs *regs) -{ - printk(KERN_DEFAULT "\n"); - printk(KERN_DEFAULT "Pid: %d, comm: %20s\n", - task_pid_nr(current), current->comm); - __show_regs(regs); - __backtrace(); -} - -void flush_thread(void) -{ - struct thread_info *thread = current_thread_info(); - struct task_struct *tsk = current; - - memset(thread->used_cp, 0, sizeof(thread->used_cp)); - memset(&tsk->thread.debug, 0, sizeof(struct debug_info)); -#ifdef CONFIG_UNICORE_FPU_F64 - memset(&thread->fpstate, 0, sizeof(struct fp_state)); -#endif -} - -void release_thread(struct task_struct *dead_task) -{ -} - -asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread"); - -int -copy_thread(unsigned long clone_flags, unsigned long stack_start, - unsigned long stk_sz, struct task_struct *p) -{ - struct thread_info *thread = task_thread_info(p); - struct pt_regs *childregs = task_pt_regs(p); - - memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save)); - thread->cpu_context.sp = (unsigned long)childregs; - if (unlikely(p->flags & PF_KTHREAD)) { - thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread; - thread->cpu_context.r4 = stack_start; - thread->cpu_context.r5 = stk_sz; - memset(childregs, 0, sizeof(struct pt_regs)); - } else { - thread->cpu_context.pc = (unsigned long)ret_from_fork; - *childregs = *current_pt_regs(); - childregs->UCreg_00 = 0; - if (stack_start) - childregs->UCreg_sp = stack_start; - - if (clone_flags & CLONE_SETTLS) - childregs->UCreg_16 = childregs->UCreg_03; - } - return 0; -} - -/* - * Fill in the task's elfregs structure for a core dump. - */ -int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) -{ - elf_core_copy_regs(elfregs, task_pt_regs(t)); - return 1; -} - -/* - * fill in the fpe structure for a core dump... - */ -int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp) -{ - struct thread_info *thread = current_thread_info(); - int used_math = thread->used_cp[1] | thread->used_cp[2]; - -#ifdef CONFIG_UNICORE_FPU_F64 - if (used_math) - memcpy(fp, &thread->fpstate, sizeof(*fp)); -#endif - return used_math != 0; -} -EXPORT_SYMBOL(dump_fpu); - -unsigned long get_wchan(struct task_struct *p) -{ - struct stackframe frame; - int count = 0; - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - - frame.fp = thread_saved_fp(p); - frame.sp = thread_saved_sp(p); - frame.lr = 0; /* recovered from the stack */ - frame.pc = thread_saved_pc(p); - do { - int ret = unwind_frame(&frame); - if (ret < 0) - return 0; - if (!in_sched_functions(frame.pc)) - return frame.pc; - } while ((count++) < 16); - return 0; -} - -unsigned long arch_randomize_brk(struct mm_struct *mm) -{ - return randomize_page(mm->brk, 0x02000000); -} - -/* - * The vectors page is always readable from user space for the - * atomic helpers and the signal restart code. Let's declare a mapping - * for it so it is visible through ptrace and /proc/<pid>/mem. - */ - -int vectors_user_mapping(void) -{ - struct mm_struct *mm = current->mm; - return install_special_mapping(mm, 0xffff0000, PAGE_SIZE, - VM_READ | VM_EXEC | - VM_MAYREAD | VM_MAYEXEC | - VM_DONTEXPAND | VM_DONTDUMP, - NULL); -} - -const char *arch_vma_name(struct vm_area_struct *vma) -{ - return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL; -} diff --git a/arch/unicore32/kernel/ptrace.c b/arch/unicore32/kernel/ptrace.c deleted file mode 100644 index 0f216567b90a..000000000000 --- a/arch/unicore32/kernel/ptrace.c +++ /dev/null @@ -1,147 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/ptrace.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * By Ross Biro 1/23/92 - */ -#include <linux/kernel.h> -#include <linux/ptrace.h> -#include <linux/signal.h> -#include <linux/uaccess.h> -#include <linux/sched/task_stack.h> - -/* - * this routine will get a word off of the processes privileged stack. - * the offset is how far from the base addr as stored in the THREAD. - * this routine assumes that all the privileged stacks are in our - * data space. - */ -static inline long get_user_reg(struct task_struct *task, int offset) -{ - return task_pt_regs(task)->uregs[offset]; -} - -/* - * this routine will put a word on the processes privileged stack. - * the offset is how far from the base addr as stored in the THREAD. - * this routine assumes that all the privileged stacks are in our - * data space. - */ -static inline int -put_user_reg(struct task_struct *task, int offset, long data) -{ - struct pt_regs newregs, *regs = task_pt_regs(task); - int ret = -EINVAL; - - newregs = *regs; - newregs.uregs[offset] = data; - - if (valid_user_regs(&newregs)) { - regs->uregs[offset] = data; - ret = 0; - } - - return ret; -} - -/* - * Called by kernel/ptrace.c when detaching.. - */ -void ptrace_disable(struct task_struct *child) -{ -} - -/* - * We actually access the pt_regs stored on the kernel stack. - */ -static int ptrace_read_user(struct task_struct *tsk, unsigned long off, - unsigned long __user *ret) -{ - unsigned long tmp; - - tmp = 0; - if (off < sizeof(struct pt_regs)) - tmp = get_user_reg(tsk, off >> 2); - - return put_user(tmp, ret); -} - -/* - * We actually access the pt_regs stored on the kernel stack. - */ -static int ptrace_write_user(struct task_struct *tsk, unsigned long off, - unsigned long val) -{ - if (off >= sizeof(struct pt_regs)) - return 0; - - return put_user_reg(tsk, off >> 2, val); -} - -long arch_ptrace(struct task_struct *child, long request, - unsigned long addr, unsigned long data) -{ - int ret; - unsigned long __user *datap = (unsigned long __user *) data; - - switch (request) { - case PTRACE_PEEKUSR: - ret = ptrace_read_user(child, addr, datap); - break; - - case PTRACE_POKEUSR: - ret = ptrace_write_user(child, addr, data); - break; - - case PTRACE_GET_THREAD_AREA: - ret = put_user(task_pt_regs(child)->UCreg_16, - datap); - break; - - default: - ret = ptrace_request(child, request, addr, data); - break; - } - - return ret; -} - -asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) -{ - unsigned long ip; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return scno; - if (!(current->ptrace & PT_PTRACED)) - return scno; - - /* - * Save IP. IP is used to denote syscall entry/exit: - * IP = 0 -> entry, = 1 -> exit - */ - ip = regs->UCreg_ip; - regs->UCreg_ip = why; - - current_thread_info()->syscall = scno; - - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } - regs->UCreg_ip = ip; - - return current_thread_info()->syscall; -} diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c deleted file mode 100644 index 78f12e627365..000000000000 --- a/arch/unicore32/kernel/puv3-core.c +++ /dev/null @@ -1,276 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/puv3-core.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/cnt32_to_63.h> -#include <linux/usb/musb.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/pm.h> - -/* - * This is the PKUnity sched_clock implementation. This has - * a resolution of 271ns, and a maximum value of 32025597s (370 days). - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 582 seconds between successive - * calls to this function. - * - * ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32 - */ -unsigned long long sched_clock(void) -{ - unsigned long long v = cnt32_to_63(readl(OST_OSCR)); - - /* original conservative method, but overflow frequently - * v *= NSEC_PER_SEC >> 12; - * do_div(v, CLOCK_TICK_RATE >> 12); - */ - v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5; - - return v; -} - -static struct resource puv3_usb_resources[] = { - /* order is significant! */ - { - .start = io_v2p(PKUNITY_USB_BASE), - .end = io_v2p(PKUNITY_USB_BASE) + 0x3ff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_USB, - .flags = IORESOURCE_IRQ, - }, { - .start = IRQ_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct musb_hdrc_config puv3_usb_config[] = { - { - .num_eps = 16, - .multipoint = 1, -#ifdef CONFIG_USB_INVENTRA_DMA - .dma = 1, - .dma_channels = 8, -#endif - }, -}; - -static struct musb_hdrc_platform_data puv3_usb_plat = { - .mode = MUSB_HOST, - .min_power = 100, - .clock = 0, - .config = puv3_usb_config, -}; - -static struct resource puv3_mmc_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_SDC_BASE), - .end = io_v2p(PKUNITY_SDC_BASE) + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SDC, - .end = IRQ_SDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource puv3_unigfx_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_UNIGFX_BASE), - .end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource puv3_rtc_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_RTC_BASE), - .end = io_v2p(PKUNITY_RTC_BASE) + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTCAlarm, - .end = IRQ_RTCAlarm, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTC, - .end = IRQ_RTC, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource puv3_pwm_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_OST_BASE) + 0x80, - .end = io_v2p(PKUNITY_OST_BASE) + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource puv3_uart0_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_UART0_BASE), - .end = io_v2p(PKUNITY_UART0_BASE) + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UART0, - .end = IRQ_UART0, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource puv3_uart1_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_UART1_BASE), - .end = io_v2p(PKUNITY_UART1_BASE) + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UART1, - .end = IRQ_UART1, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource puv3_umal_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_UMAL_BASE), - .end = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UMAL, - .end = IRQ_UMAL, - .flags = IORESOURCE_IRQ - } -}; - -#ifdef CONFIG_PUV3_PM - -#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x -#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] - -/* - * List of global PXA peripheral registers to preserve. - * More ones like CP and general purpose register values are preserved - * with the stack pointer in sleep.S. - */ -enum { - SLEEP_SAVE_PM_PLLDDRCFG, - SLEEP_SAVE_COUNT -}; - - -static void puv3_cpu_pm_save(unsigned long *sleep_save) -{ -/* SAVE(PM_PLLDDRCFG); */ -} - -static void puv3_cpu_pm_restore(unsigned long *sleep_save) -{ -/* RESTORE(PM_PLLDDRCFG); */ -} - -static int puv3_cpu_pm_prepare(void) -{ - /* set resume return address */ - writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG); - return 0; -} - -static void puv3_cpu_pm_enter(suspend_state_t state) -{ - /* Clear reset status */ - writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR - | RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR); - - switch (state) { -/* case PM_SUSPEND_ON: - puv3_cpu_idle(); - break; */ - case PM_SUSPEND_MEM: - puv3_cpu_pm_prepare(); - puv3_cpu_suspend(PM_PMCR_SFB); - break; - } -} - -static int puv3_cpu_pm_valid(suspend_state_t state) -{ - return state == PM_SUSPEND_MEM; -} - -static void puv3_cpu_pm_finish(void) -{ - /* ensure not to come back here if it wasn't intended */ - /* PSPR = 0; */ -} - -static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = { - .save_count = SLEEP_SAVE_COUNT, - .valid = puv3_cpu_pm_valid, - .save = puv3_cpu_pm_save, - .restore = puv3_cpu_pm_restore, - .enter = puv3_cpu_pm_enter, - .prepare = puv3_cpu_pm_prepare, - .finish = puv3_cpu_pm_finish, -}; - -static void __init puv3_init_pm(void) -{ - puv3_cpu_pm_fns = &puv3_cpu_pm_fnss; -} -#else -static inline void puv3_init_pm(void) {} -#endif - -void puv3_ps2_init(void) -{ - struct clk *bclk32; - - bclk32 = clk_get(NULL, "BUS32_CLK"); - writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */ -} - -void __init puv3_core_init(void) -{ - puv3_init_pm(); - puv3_ps2_init(); - - platform_device_register_simple("PKUnity-v3-RTC", -1, - puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources)); - platform_device_register_simple("PKUnity-v3-UMAL", -1, - puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources)); - platform_device_register_simple("PKUnity-v3-MMC", -1, - puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources)); - platform_device_register_simple("PKUnity-v3-UNIGFX", -1, - puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources)); - platform_device_register_simple("PKUnity-v3-PWM", -1, - puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources)); - platform_device_register_simple("PKUnity-v3-UART", 0, - puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources)); - platform_device_register_simple("PKUnity-v3-UART", 1, - puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources)); - platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0); - platform_device_register_resndata(NULL, "musb_hdrc", -1, - puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources), - &puv3_usb_plat, sizeof(puv3_usb_plat)); -} - diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c deleted file mode 100644 index e251f5028396..000000000000 --- a/arch/unicore32/kernel/puv3-nb0916.c +++ /dev/null @@ -1,147 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/puv3-nb0916.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <linux/reboot.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <mach/hardware.h> - -static struct physmap_flash_data physmap_flash_data = { - .width = 1, -}; - -static struct resource physmap_flash_resource = { - .start = 0xFFF80000, - .end = 0xFFFFFFFF, - .flags = IORESOURCE_MEM, -}; - -static struct resource puv3_i2c_resources[] = { - [0] = { - .start = io_v2p(PKUNITY_I2C_BASE), - .end = io_v2p(PKUNITY_I2C_BASE) + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_I2C, - .end = IRQ_I2C, - .flags = IORESOURCE_IRQ, - } -}; - -static struct pwm_lookup nb0916_pwm_lookup[] = { - PWM_LOOKUP("PKUnity-v3-PWM", 0, "pwm-backlight", NULL, 70 * 1024, - PWM_POLARITY_NORMAL), -}; - -static struct platform_pwm_backlight_data nb0916_backlight_data = { - .max_brightness = 100, - .dft_brightness = 100, -}; - -static struct gpio_keys_button nb0916_gpio_keys[] = { - { - .type = EV_KEY, - .code = KEY_POWER, - .gpio = GPI_SOFF_REQ, - .desc = "Power Button", - .wakeup = 1, - .active_low = 1, - }, - { - .type = EV_KEY, - .code = BTN_TOUCH, - .gpio = GPI_BTN_TOUCH, - .desc = "Touchpad Button", - .wakeup = 1, - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data nb0916_gpio_button_data = { - .buttons = nb0916_gpio_keys, - .nbuttons = ARRAY_SIZE(nb0916_gpio_keys), -}; - -static irqreturn_t nb0916_lcdcaseoff_handler(int irq, void *dev_id) -{ - if (gpio_get_value(GPI_LCD_CASE_OFF)) - gpio_set_value(GPO_LCD_EN, 1); - else - gpio_set_value(GPO_LCD_EN, 0); - - return IRQ_HANDLED; -} - -static irqreturn_t nb0916_overheat_handler(int irq, void *dev_id) -{ - machine_halt(); - /* SYSTEM HALT, NO RETURN */ - return IRQ_HANDLED; -} - -static struct i2c_board_info __initdata puv3_i2c_devices[] = { - { I2C_BOARD_INFO("lm75", I2C_TAR_THERMAL), }, - { I2C_BOARD_INFO("bq27200", I2C_TAR_PWIC), }, - { I2C_BOARD_INFO("24c02", I2C_TAR_EEPROM), }, -}; - -int __init mach_nb0916_init(void) -{ - i2c_register_board_info(0, puv3_i2c_devices, - ARRAY_SIZE(puv3_i2c_devices)); - - platform_device_register_simple("PKUnity-v3-I2C", -1, - puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources)); - - pwm_add_table(nb0916_pwm_lookup, ARRAY_SIZE(nb0916_pwm_lookup)); - - platform_device_register_data(NULL, "pwm-backlight", -1, - &nb0916_backlight_data, sizeof(nb0916_backlight_data)); - - platform_device_register_data(NULL, "gpio-keys", -1, - &nb0916_gpio_button_data, sizeof(nb0916_gpio_button_data)); - - platform_device_register_resndata(NULL, "physmap-flash", -1, - &physmap_flash_resource, 1, - &physmap_flash_data, sizeof(physmap_flash_data)); - - if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF), - &nb0916_lcdcaseoff_handler, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "NB0916 lcd case off", NULL) < 0) { - - printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n", - gpio_to_irq(GPI_LCD_CASE_OFF)); - } - - if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "NB0916 overheating protection", NULL) < 0) { - - printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n", - gpio_to_irq(GPI_OTP_INT)); - } - - return 0; -} - -subsys_initcall_sync(mach_nb0916_init); diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c deleted file mode 100644 index 0c4242a5ee1d..000000000000 --- a/arch/unicore32/kernel/setup.c +++ /dev/null @@ -1,352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/setup.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/stddef.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/utsname.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/memblock.h> -#include <linux/seq_file.h> -#include <linux/screen_info.h> -#include <linux/init.h> -#include <linux/root_dev.h> -#include <linux/cpu.h> -#include <linux/interrupt.h> -#include <linux/smp.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/elf.h> -#include <linux/io.h> - -#include <asm/cputype.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <asm/traps.h> -#include <asm/memblock.h> - -#include "setup.h" - -#ifndef MEM_SIZE -#define MEM_SIZE (16*1024*1024) -#endif - -struct stack { - u32 irq[3]; - u32 abt[3]; - u32 und[3]; -} ____cacheline_aligned; - -static struct stack stacks[NR_CPUS]; - -#ifdef CONFIG_VGA_CONSOLE -struct screen_info screen_info; -#endif - -char elf_platform[ELF_PLATFORM_SIZE]; -EXPORT_SYMBOL(elf_platform); - -static char __initdata cmd_line[COMMAND_LINE_SIZE]; - -static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; - -/* - * Standard memory resources - */ -static struct resource mem_res[] = { - { - .name = "Kernel code", - .start = 0, - .end = 0, - .flags = IORESOURCE_SYSTEM_RAM - }, - { - .name = "Kernel data", - .start = 0, - .end = 0, - .flags = IORESOURCE_SYSTEM_RAM - } -}; - -#define kernel_code mem_res[0] -#define kernel_data mem_res[1] - -/* - * These functions re-use the assembly code in head.S, which - * already provide the required functionality. - */ -static void __init setup_processor(void) -{ - printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n", - uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment); - - sprintf(init_utsname()->machine, "puv3"); - sprintf(elf_platform, "ucv2"); -} - -/* - * cpu_init - initialise one CPU. - * - * cpu_init sets up the per-CPU stacks. - */ -void cpu_init(void) -{ - unsigned int cpu = smp_processor_id(); - struct stack *stk = &stacks[cpu]; - - /* - * setup stacks for re-entrant exception handlers - */ - __asm__ ( - "mov.a asr, %1\n\t" - "add sp, %0, %2\n\t" - "mov.a asr, %3\n\t" - "add sp, %0, %4\n\t" - "mov.a asr, %5\n\t" - "add sp, %0, %6\n\t" - "mov.a asr, %7" - : - : "r" (stk), - "r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE), - "I" (offsetof(struct stack, irq[0])), - "r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE), - "I" (offsetof(struct stack, abt[0])), - "r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE), - "I" (offsetof(struct stack, und[0])), - "r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE) - : "r30", "cc"); -} - -static int __init uc32_add_memory(unsigned long start, unsigned long size) -{ - struct membank *bank = &meminfo.bank[meminfo.nr_banks]; - - if (meminfo.nr_banks >= NR_BANKS) { - printk(KERN_CRIT "NR_BANKS too low, " - "ignoring memory at %#lx\n", start); - return -EINVAL; - } - - /* - * Ensure that start/size are aligned to a page boundary. - * Size is appropriately rounded down, start is rounded up. - */ - size -= start & ~PAGE_MASK; - - bank->start = PAGE_ALIGN(start); - bank->size = size & PAGE_MASK; - - /* - * Check whether this memory region has non-zero size or - * invalid node number. - */ - if (bank->size == 0) - return -EINVAL; - - meminfo.nr_banks++; - return 0; -} - -/* - * Pick out the memory size. We look for mem=size@start, - * where start and size are "size[KkMm]" - */ -static int __init early_mem(char *p) -{ - static int usermem __initdata = 1; - unsigned long size, start; - char *endp; - - /* - * If the user specifies memory size, we - * blow away any automatically generated - * size. - */ - if (usermem) { - usermem = 0; - meminfo.nr_banks = 0; - } - - start = PHYS_OFFSET; - size = memparse(p, &endp); - if (*endp == '@') - start = memparse(endp + 1, NULL); - - uc32_add_memory(start, size); - - return 0; -} -early_param("mem", early_mem); - -static void __init -request_standard_resources(struct meminfo *mi) -{ - struct resource *res; - int i; - - kernel_code.start = virt_to_phys(_stext); - kernel_code.end = virt_to_phys(_etext - 1); - kernel_data.start = virt_to_phys(_sdata); - kernel_data.end = virt_to_phys(_end - 1); - - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0) - continue; - - res = memblock_alloc_low(sizeof(*res), SMP_CACHE_BYTES); - if (!res) - panic("%s: Failed to allocate %zu bytes align=%x\n", - __func__, sizeof(*res), SMP_CACHE_BYTES); - - res->name = "System RAM"; - res->start = mi->bank[i].start; - res->end = mi->bank[i].start + mi->bank[i].size - 1; - res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; - - request_resource(&iomem_resource, res); - - if (kernel_code.start >= res->start && - kernel_code.end <= res->end) - request_resource(res, &kernel_code); - if (kernel_data.start >= res->start && - kernel_data.end <= res->end) - request_resource(res, &kernel_data); - } -} - -static void (*init_machine)(void) __initdata; - -static int __init customize_machine(void) -{ - /* customizes platform devices, or adds new ones */ - if (init_machine) - init_machine(); - return 0; -} -arch_initcall(customize_machine); - -void __init setup_arch(char **cmdline_p) -{ - char *from = default_command_line; - - setup_processor(); - - init_mm.start_code = (unsigned long) _stext; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) _end; - - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - - /* populate cmd_line too for later use, preserving boot_command_line */ - strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = cmd_line; - - parse_early_param(); - - uc32_memblock_init(&meminfo); - - paging_init(); - request_standard_resources(&meminfo); - - cpu_init(); - - /* - * Set up various architecture-specific pointers - */ - init_machine = puv3_core_init; - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; -#endif -#endif - early_trap_init(); -} - -static struct cpu cpuinfo_unicore; - -static int __init topology_init(void) -{ - int i; - - for_each_possible_cpu(i) - register_cpu(&cpuinfo_unicore, i); - - return 0; -} -subsys_initcall(topology_init); - -#ifdef CONFIG_HAVE_PROC_CPU -static int __init proc_cpu_init(void) -{ - struct proc_dir_entry *res; - - res = proc_mkdir("cpu", NULL); - if (!res) - return -ENOMEM; - return 0; -} -fs_initcall(proc_cpu_init); -#endif - -static int c_show(struct seq_file *m, void *v) -{ - seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n", - (int)(uc32_cpuid >> 16) & 15, elf_platform); - - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", - loops_per_jiffy / (500000/HZ), - (loops_per_jiffy / (5000/HZ)) % 100); - - /* dump out the processor features */ - seq_puts(m, "Features\t: CMOV UC-F64"); - - seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24); - seq_printf(m, "CPU architecture: 2\n"); - seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15); - - seq_printf(m, "Cache type\t: write-back\n" - "Cache clean\t: cp0 c5 ops\n" - "Cache lockdown\t: not support\n" - "Cache format\t: Harvard\n"); - - seq_puts(m, "\n"); - - seq_printf(m, "Hardware\t: PKUnity v3\n"); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < 1 ? (void *)1 : NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return NULL; -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = c_show -}; diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h deleted file mode 100644 index 967352323185..000000000000 --- a/arch/unicore32/kernel/setup.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/setup.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#ifndef __UNICORE_KERNEL_SETUP_H__ -#define __UNICORE_KERNEL_SETUP_H__ - -#include <asm/hwdef-copro.h> - -extern void paging_init(void); -extern void puv3_core_init(void); -extern void cpu_init(void); - -extern void puv3_ps2_init(void); -extern void pci_puv3_preinit(void); -extern void __init puv3_init_gpio(void); - -extern void setup_mm_for_reboot(void); - -extern char __stubs_start[], __stubs_end[]; -extern char __vectors_start[], __vectors_end[]; - -extern void kernel_thread_helper(void); - -extern void __init early_signal_init(void); - -extern asmlinkage void __backtrace(void); -extern asmlinkage void c_backtrace(unsigned long fp, const char *loglvl); - -extern void __show_regs(struct pt_regs *); - -#endif diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c deleted file mode 100644 index 3946182a835d..000000000000 --- a/arch/unicore32/kernel/signal.c +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/signal.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/personality.h> -#include <linux/uaccess.h> -#include <linux/tracehook.h> -#include <linux/elf.h> -#include <linux/unistd.h> - -#include <asm/cacheflush.h> -#include <asm/ucontext.h> - -/* - * For UniCore syscalls, we encode the syscall number into the instruction. - */ -#define SWI_SYS_SIGRETURN (0xff000000) /* error number for new abi */ -#define SWI_SYS_RT_SIGRETURN (0xff000000 | (__NR_rt_sigreturn)) -#define SWI_SYS_RESTART (0xff000000 | (__NR_restart_syscall)) - -#define KERN_SIGRETURN_CODE (KUSER_VECPAGE_BASE + 0x00000500) -#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) - -const unsigned long sigreturn_codes[3] = { - SWI_SYS_SIGRETURN, SWI_SYS_RT_SIGRETURN, -}; - -const unsigned long syscall_restart_code[2] = { - SWI_SYS_RESTART, /* swi __NR_restart_syscall */ - 0x69efc004, /* ldr pc, [sp], #4 */ -}; - -/* - * Do a signal return; undo the signal stack. These are aligned to 64-bit. - */ -struct sigframe { - struct ucontext uc; - unsigned long retcode[2]; -}; - -struct rt_sigframe { - struct siginfo info; - struct sigframe sig; -}; - -static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) -{ - sigset_t set; - int err; - - err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set)); - if (err == 0) - set_current_blocked(&set); - - err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00); - err |= __get_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01); - err |= __get_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02); - err |= __get_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03); - err |= __get_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04); - err |= __get_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05); - err |= __get_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06); - err |= __get_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07); - err |= __get_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08); - err |= __get_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09); - err |= __get_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10); - err |= __get_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11); - err |= __get_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12); - err |= __get_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13); - err |= __get_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14); - err |= __get_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15); - err |= __get_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16); - err |= __get_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17); - err |= __get_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18); - err |= __get_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19); - err |= __get_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20); - err |= __get_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21); - err |= __get_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22); - err |= __get_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23); - err |= __get_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24); - err |= __get_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25); - err |= __get_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26); - err |= __get_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp); - err |= __get_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip); - err |= __get_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp); - err |= __get_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr); - err |= __get_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc); - err |= __get_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr); - - err |= !valid_user_regs(regs); - - return err; -} - -asmlinkage int __sys_rt_sigreturn(struct pt_regs *regs) -{ - struct rt_sigframe __user *frame; - - /* Always make any pending restarted system calls return -EINTR */ - current->restart_block.fn = do_no_restart_syscall; - - /* - * Since we stacked the signal on a 64-bit boundary, - * then 'sp' should be word aligned here. If it's - * not, then the user is trying to mess with us. - */ - if (regs->UCreg_sp & 7) - goto badframe; - - frame = (struct rt_sigframe __user *)regs->UCreg_sp; - - if (!access_ok(frame, sizeof(*frame))) - goto badframe; - - if (restore_sigframe(regs, &frame->sig)) - goto badframe; - - if (restore_altstack(&frame->sig.uc.uc_stack)) - goto badframe; - - return regs->UCreg_00; - -badframe: - force_sig(SIGSEGV); - return 0; -} - -static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, - sigset_t *set) -{ - int err = 0; - - err |= __put_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00); - err |= __put_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01); - err |= __put_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02); - err |= __put_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03); - err |= __put_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04); - err |= __put_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05); - err |= __put_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06); - err |= __put_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07); - err |= __put_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08); - err |= __put_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09); - err |= __put_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10); - err |= __put_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11); - err |= __put_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12); - err |= __put_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13); - err |= __put_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14); - err |= __put_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15); - err |= __put_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16); - err |= __put_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17); - err |= __put_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18); - err |= __put_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19); - err |= __put_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20); - err |= __put_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21); - err |= __put_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22); - err |= __put_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23); - err |= __put_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24); - err |= __put_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25); - err |= __put_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26); - err |= __put_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp); - err |= __put_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip); - err |= __put_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp); - err |= __put_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr); - err |= __put_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc); - err |= __put_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr); - - err |= __put_user(current->thread.trap_no, - &sf->uc.uc_mcontext.trap_no); - err |= __put_user(current->thread.error_code, - &sf->uc.uc_mcontext.error_code); - err |= __put_user(current->thread.address, - &sf->uc.uc_mcontext.fault_address); - err |= __put_user(set->sig[0], &sf->uc.uc_mcontext.oldmask); - - err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set)); - - return err; -} - -static inline void __user *get_sigframe(struct k_sigaction *ka, - struct pt_regs *regs, int framesize) -{ - unsigned long sp = regs->UCreg_sp; - void __user *frame; - - /* - * This is the X/Open sanctioned signal stack switching. - */ - if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp)) - sp = current->sas_ss_sp + current->sas_ss_size; - - /* - * ATPCS B01 mandates 8-byte alignment - */ - frame = (void __user *)((sp - framesize) & ~7); - - /* - * Check that we can actually write to the signal frame. - */ - if (!access_ok(frame, framesize)) - frame = NULL; - - return frame; -} - -static int setup_return(struct pt_regs *regs, struct k_sigaction *ka, - unsigned long __user *rc, void __user *frame, int usig) -{ - unsigned long handler = (unsigned long)ka->sa.sa_handler; - unsigned long retcode; - unsigned long asr = regs->UCreg_asr & ~PSR_f; - - unsigned int idx = 0; - - if (ka->sa.sa_flags & SA_SIGINFO) - idx += 1; - - if (__put_user(sigreturn_codes[idx], rc) || - __put_user(sigreturn_codes[idx+1], rc+1)) - return 1; - - retcode = KERN_SIGRETURN_CODE + (idx << 2); - - regs->UCreg_00 = usig; - regs->UCreg_sp = (unsigned long)frame; - regs->UCreg_lr = retcode; - regs->UCreg_pc = handler; - regs->UCreg_asr = asr; - - return 0; -} - -static int setup_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs) -{ - struct sigframe __user *frame = get_sigframe(&ksig->ka, regs, sizeof(*frame)); - int err = 0; - - if (!frame) - return 1; - - /* - * Set uc.uc_flags to a value which sc.trap_no would never have. - */ - err |= __put_user(0x5ac3c35a, &frame->uc.uc_flags); - - err |= setup_sigframe(frame, regs, set); - if (err == 0) - err |= setup_return(regs, &ksig->ka, frame->retcode, frame, - ksig->sig); - - return err; -} - -static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, - struct pt_regs *regs) -{ - struct rt_sigframe __user *frame = - get_sigframe(&ksig->ka, regs, sizeof(*frame)); - int err = 0; - - if (!frame) - return 1; - - err |= copy_siginfo_to_user(&frame->info, &ksig->info); - - err |= __put_user(0, &frame->sig.uc.uc_flags); - err |= __put_user(NULL, &frame->sig.uc.uc_link); - err |= __save_altstack(&frame->sig.uc.uc_stack, regs->UCreg_sp); - err |= setup_sigframe(&frame->sig, regs, set); - if (err == 0) - err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame, - ksig->sig); - - if (err == 0) { - /* - * For realtime signals we must also set the second and third - * arguments for the signal handler. - */ - regs->UCreg_01 = (unsigned long)&frame->info; - regs->UCreg_02 = (unsigned long)&frame->sig.uc; - } - - return err; -} - -static inline void setup_syscall_restart(struct pt_regs *regs) -{ - regs->UCreg_00 = regs->UCreg_ORIG_00; - regs->UCreg_pc -= 4; -} - -/* - * OK, we're invoking a handler - */ -static void handle_signal(struct ksignal *ksig, struct pt_regs *regs, - int syscall) -{ - struct thread_info *thread = current_thread_info(); - sigset_t *oldset = sigmask_to_save(); - int usig = ksig->sig; - int ret; - - /* - * If we were from a system call, check for system call restarting... - */ - if (syscall) { - switch (regs->UCreg_00) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->UCreg_00 = -EINTR; - break; - case -ERESTARTSYS: - if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { - regs->UCreg_00 = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - setup_syscall_restart(regs); - } - } - - /* - * Set up the stack frame - */ - if (ksig->ka.sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(ksig, oldset, regs); - else - ret = setup_frame(ksig, oldset, regs); - - /* - * Check that the resulting registers are actually sane. - */ - ret |= !valid_user_regs(regs); - - signal_setup_done(ret, ksig, 0); -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -static void do_signal(struct pt_regs *regs, int syscall) -{ - struct ksignal ksig; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (get_signal(&ksig)) { - handle_signal(&ksig, regs, syscall); - return; - } - - /* - * No signal to deliver to the process - restart the syscall. - */ - if (syscall) { - if (regs->UCreg_00 == -ERESTART_RESTARTBLOCK) { - u32 __user *usp; - - regs->UCreg_sp -= 4; - usp = (u32 __user *)regs->UCreg_sp; - - if (put_user(regs->UCreg_pc, usp) == 0) { - regs->UCreg_pc = KERN_RESTART_CODE; - } else { - regs->UCreg_sp += 4; - force_sigsegv(0); - } - } - if (regs->UCreg_00 == -ERESTARTNOHAND || - regs->UCreg_00 == -ERESTARTSYS || - regs->UCreg_00 == -ERESTARTNOINTR) { - setup_syscall_restart(regs); - } - } - /* If there's no signal to deliver, we just put the saved - * sigmask back. - */ - restore_saved_sigmask(); -} - -asmlinkage void do_notify_resume(struct pt_regs *regs, - unsigned int thread_flags, int syscall) -{ - if (thread_flags & _TIF_SIGPENDING) - do_signal(regs, syscall); - - if (thread_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } -} - -/* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ -void __init early_signal_init(void) -{ - memcpy((void *)kuser_vecpage_to_vectors(KERN_SIGRETURN_CODE), - sigreturn_codes, sizeof(sigreturn_codes)); - memcpy((void *)kuser_vecpage_to_vectors(KERN_RESTART_CODE), - syscall_restart_code, sizeof(syscall_restart_code)); - /* Need not to flush icache, since early_trap_init will do it last. */ -} diff --git a/arch/unicore32/kernel/sleep.S b/arch/unicore32/kernel/sleep.S deleted file mode 100644 index 23151abe53c6..000000000000 --- a/arch/unicore32/kernel/sleep.S +++ /dev/null @@ -1,199 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/sleep.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <mach/hardware.h> - - .text - -pkunity_cpu_save_cp: - - @ get coprocessor registers - - movc r3, p0.c7, #0 @ PID - movc r4, p0.c2, #0 @ translation table base addr - movc r5, p0.c1, #0 @ control reg - - - @ store them plus current virtual stack ptr on stack - mov r6, sp - stm.w (r3 - r6), [sp-] - - mov pc, lr - -pkunity_cpu_save_sp: - @ preserve phys address of stack - mov r0, sp - stw.w lr, [sp+], #-4 - b.l sleep_phys_sp - ldw r1, =sleep_save_sp - stw r0, [r1] - ldw.w pc, [sp]+, #4 - -/* - * puv3_cpu_suspend() - * - * Forces CPU into sleep state. - * - * r0 = value for PWRMODE M field for desired sleep state - */ - -ENTRY(puv3_cpu_suspend) - stm.w (r16 - r27, lr), [sp-] @ save registers on stack - stm.w (r4 - r15), [sp-] @ save registers on stack - -#ifdef CONFIG_UNICORE_FPU_F64 - sfm.w (f0 - f7 ), [sp-] - sfm.w (f8 - f15), [sp-] - sfm.w (f16 - f23), [sp-] - sfm.w (f24 - f31), [sp-] - cff r4, s31 - stm.w (r4), [sp-] -#endif - b.l pkunity_cpu_save_cp - - b.l pkunity_cpu_save_sp - - @ clean data cache - mov r1, #0 - movc p0.c5, r1, #14 - nop - nop - nop - nop - - - - @ DDR2 BaseAddr - ldw r0, =(PKUNITY_DDR2CTRL_BASE) - - @ PM BaseAddr - ldw r1, =(PKUNITY_PM_BASE) - - @ set PLL_SYS_CFG reg, 275 - movl r6, #0x00002401 - stw r6, [r1+], #0x18 - @ set PLL_DDR_CFG reg, 66MHz - movl r6, #0x00100c00 - stw r6, [r1+], #0x1c - - @ set wake up source - movl r8, #0x800001ff @ epip4d - stw r8, [r1+], #0xc - - @ set PGSR - movl r5, #0x40000 - stw r5, [r1+], #0x10 - - @ prepare DDR2 refresh settings - ldw r5, [r0+], #0x24 - or r5, r5, #0x00000001 - - @ prepare PMCR for PLL changing - movl r6, #0xc - - @ prepare for closing PLL - movl r7, #0x1 - - @ prepare sleep mode - mov r8, #0x1 - -@ movl r0, 0x11111111 -@ put_word_ocd r0 - b pkunity_cpu_do_suspend - - .ltorg - .align 5 -pkunity_cpu_do_suspend: - b 101f - @ put DDR2 into self-refresh -100: stw r5, [r0+], #0x24 - @ change PLL - stw r6, [r1] - b 1f - - .ltorg - .align 5 -101: b 102f - @ wait for PLL changing complete -1: ldw r6, [r1+], #0x44 - csub.a r6, #0x1 - bne 1b - b 2f - - .ltorg - .align 5 -102: b 100b - @ close PLL -2: stw r7, [r1+], #0x4 - @ enter sleep mode - stw r8, [r1] -3: b 3b - - - - -/* - * puv3_cpu_resume() - * - * entry point from bootloader into kernel during resume - * - * Note: Yes, part of the following code is located into the .data section. - * This is to allow sleep_save_sp to be accessed with a relative load - * while we can't rely on any MMU translation. We could have put - * sleep_save_sp in the .text section as well, but some setups might - * insist on it to be truly read-only. - */ - - .data - .align 5 -ENTRY(puv3_cpu_resume) -@ movl r0, 0x20202020 -@ put_word_ocd r0 - - ldw r0, sleep_save_sp @ stack phys addr - ldw r2, =resume_after_mmu @ its absolute virtual address - ldm (r3 - r6), [r0]+ @ CP regs + virt stack ptr - mov sp, r6 @ CP regs + virt stack ptr - - mov r1, #0 - movc p0.c6, r1, #6 @ invalidate I & D TLBs - movc p0.c5, r1, #28 @ invalidate I & D caches, BTB - - movc p0.c7, r3, #0 @ PID - movc p0.c2, r4, #0 @ translation table base addr - movc p0.c1, r5, #0 @ control reg, turn on mmu - nop - jump r2 - nop - nop - nop - nop - nop - -sleep_save_sp: - .word 0 @ preserve stack phys ptr here - - .text -resume_after_mmu: -@ movl r0, 0x30303030 -@ put_word_ocd r0 - -#ifdef CONFIG_UNICORE_FPU_F64 - lfm.w (f0 - f7 ), [sp]+ - lfm.w (f8 - f15), [sp]+ - lfm.w (f16 - f23), [sp]+ - lfm.w (f24 - f31), [sp]+ - ldm.w (r4), [sp]+ - ctf r4, s31 -#endif - ldm.w (r4 - r15), [sp]+ @ restore registers from stack - ldm.w (r16 - r27, pc), [sp]+ @ return to caller diff --git a/arch/unicore32/kernel/stacktrace.c b/arch/unicore32/kernel/stacktrace.c deleted file mode 100644 index c9d8650e9d78..000000000000 --- a/arch/unicore32/kernel/stacktrace.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/stacktrace.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/stacktrace.h> - -#include <asm/stacktrace.h> - -#if defined(CONFIG_FRAME_POINTER) -/* - * Unwind the current stack frame and store the new register values in the - * structure passed as argument. Unwinding is equivalent to a function return, - * hence the new PC value rather than LR should be used for backtrace. - * - * With framepointer enabled, a simple function prologue looks like this: - * mov ip, sp - * stmdb sp!, {fp, ip, lr, pc} - * sub fp, ip, #4 - * - * A simple function epilogue looks like this: - * ldm sp, {fp, sp, pc} - * - * Note that with framepointer enabled, even the leaf functions have the same - * prologue and epilogue, therefore we can ignore the LR value in this case. - */ -int notrace unwind_frame(struct stackframe *frame) -{ - unsigned long high, low; - unsigned long fp = frame->fp; - - /* only go to a higher address on the stack */ - low = frame->sp; - high = ALIGN(low, THREAD_SIZE); - - /* check current frame pointer is within bounds */ - if (fp < (low + 12) || fp + 4 >= high) - return -EINVAL; - - /* restore the registers from the stack frame */ - frame->fp = *(unsigned long *)(fp - 12); - frame->sp = *(unsigned long *)(fp - 8); - frame->pc = *(unsigned long *)(fp - 4); - - return 0; -} -#endif - -void notrace walk_stackframe(struct stackframe *frame, - int (*fn)(struct stackframe *, void *), void *data) -{ - while (1) { - int ret; - - if (fn(frame, data)) - break; - ret = unwind_frame(frame); - if (ret < 0) - break; - } -} -EXPORT_SYMBOL(walk_stackframe); - -#ifdef CONFIG_STACKTRACE -struct stack_trace_data { - struct stack_trace *trace; - unsigned int no_sched_functions; - unsigned int skip; -}; - -static int save_trace(struct stackframe *frame, void *d) -{ - struct stack_trace_data *data = d; - struct stack_trace *trace = data->trace; - unsigned long addr = frame->pc; - - if (data->no_sched_functions && in_sched_functions(addr)) - return 0; - if (data->skip) { - data->skip--; - return 0; - } - - trace->entries[trace->nr_entries++] = addr; - - return trace->nr_entries >= trace->max_entries; -} - -void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) -{ - struct stack_trace_data data; - struct stackframe frame; - - data.trace = trace; - data.skip = trace->skip; - - if (tsk != current) { - data.no_sched_functions = 1; - frame.fp = thread_saved_fp(tsk); - frame.sp = thread_saved_sp(tsk); - frame.lr = 0; /* recovered from the stack */ - frame.pc = thread_saved_pc(tsk); - } else { - register unsigned long current_sp asm("sp"); - - data.no_sched_functions = 0; - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.sp = current_sp; - frame.lr = (unsigned long)__builtin_return_address(0); - frame.pc = (unsigned long)save_stack_trace_tsk; - } - - walk_stackframe(&frame, save_trace, &data); -} - -void save_stack_trace(struct stack_trace *trace) -{ - save_stack_trace_tsk(current, trace); -} -EXPORT_SYMBOL_GPL(save_stack_trace); -#endif diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c deleted file mode 100644 index 256fb4082296..000000000000 --- a/arch/unicore32/kernel/sys.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/sys.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/fs.h> -#include <linux/file.h> -#include <linux/ipc.h> -#include <linux/uaccess.h> - -#include <asm/syscalls.h> -#include <asm/cacheflush.h> - -/* Provide the actual syscall number to call mapping. */ -#undef __SYSCALL -#define __SYSCALL(nr, call) [nr] = (call), - -#define sys_mmap2 sys_mmap_pgoff -/* Note that we don't include <linux/unistd.h> but <asm/unistd.h> */ -void *sys_call_table[__NR_syscalls] = { - [0 ... __NR_syscalls-1] = sys_ni_syscall, -#include <asm/unistd.h> -}; diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c deleted file mode 100644 index c3a37edf4d40..000000000000 --- a/arch/unicore32/kernel/time.c +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/time.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/timex.h> -#include <linux/clockchips.h> - -#include <mach/hardware.h> - -#define MIN_OSCR_DELTA 2 - -static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* Disarm the compare/match, signal the event. */ - writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER); - writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR); - c->event_handler(c); - - return IRQ_HANDLED; -} - -static int -puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) -{ - unsigned long next, oscr; - - writel(readl(OST_OIER) | OST_OIER_E0, OST_OIER); - next = readl(OST_OSCR) + delta; - writel(next, OST_OSMR0); - oscr = readl(OST_OSCR); - - return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; -} - -static int puv3_osmr0_shutdown(struct clock_event_device *evt) -{ - writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER); - writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR); - return 0; -} - -static struct clock_event_device ckevt_puv3_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = puv3_osmr0_set_next_event, - .set_state_shutdown = puv3_osmr0_shutdown, - .set_state_oneshot = puv3_osmr0_shutdown, -}; - -static u64 puv3_read_oscr(struct clocksource *cs) -{ - return readl(OST_OSCR); -} - -static struct clocksource cksrc_puv3_oscr = { - .name = "oscr", - .rating = 200, - .read = puv3_read_oscr, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -void __init time_init(void) -{ - writel(0, OST_OIER); /* disable any timer interrupts */ - writel(0, OST_OSSR); /* clear status on all timers */ - - clockevents_calc_mult_shift(&ckevt_puv3_osmr0, CLOCK_TICK_RATE, 5); - - ckevt_puv3_osmr0.max_delta_ns = - clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0); - ckevt_puv3_osmr0.max_delta_ticks = 0x7fffffff; - ckevt_puv3_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1; - ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2; - ckevt_puv3_osmr0.cpumask = cpumask_of(0); - - if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt, - IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0)) - pr_err("Failed to register ost0 interrupt\n"); - - clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE); - clockevents_register_device(&ckevt_puv3_osmr0); -} - -#ifdef CONFIG_PM -unsigned long osmr[4], oier; - -void puv3_timer_suspend(void) -{ - osmr[0] = readl(OST_OSMR0); - osmr[1] = readl(OST_OSMR1); - osmr[2] = readl(OST_OSMR2); - osmr[3] = readl(OST_OSMR3); - oier = readl(OST_OIER); -} - -void puv3_timer_resume(void) -{ - writel(0, OST_OSSR); - writel(osmr[0], OST_OSMR0); - writel(osmr[1], OST_OSMR1); - writel(osmr[2], OST_OSMR2); - writel(osmr[3], OST_OSMR3); - writel(oier, OST_OIER); - - /* - * OSMR0 is the system timer: make sure OSCR is sufficiently behind - */ - writel(readl(OST_OSMR0) - LATCH, OST_OSCR); -} -#else -void puv3_timer_suspend(void) { }; -void puv3_timer_resume(void) { }; -#endif - diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c deleted file mode 100644 index a3ac01df1a2e..000000000000 --- a/arch/unicore32/kernel/traps.c +++ /dev/null @@ -1,322 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/kernel/traps.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * 'traps.c' handles hardware exceptions after we have saved some state. - * Mostly a debugging aid, but will probably kill the offending process. - */ -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched/signal.h> -#include <linux/sched/debug.h> -#include <linux/sched/task_stack.h> -#include <linux/spinlock.h> -#include <linux/personality.h> -#include <linux/kallsyms.h> -#include <linux/kdebug.h> -#include <linux/uaccess.h> -#include <linux/delay.h> -#include <linux/hardirq.h> -#include <linux/init.h> -#include <linux/atomic.h> -#include <linux/unistd.h> - -#include <asm/cacheflush.h> -#include <asm/traps.h> - -#include "setup.h" - -static void dump_mem(const char *, const char *, unsigned long, unsigned long); - -void dump_backtrace_entry(unsigned long where, - unsigned long from, unsigned long frame) -{ -#ifdef CONFIG_KALLSYMS - printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", - where, (void *)where, from, (void *)from); -#else - printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n", - where, from); -#endif -} - -/* - * Stack pointers should always be within the kernels view of - * physical memory. If it is not there, then we can't dump - * out any information relating to the stack. - */ -static int verify_stack(unsigned long sp) -{ - if (sp < PAGE_OFFSET || - (sp > (unsigned long)high_memory && high_memory != NULL)) - return -EFAULT; - - return 0; -} - -/* - * Dump out the contents of some memory nicely... - */ -static void dump_mem(const char *lvl, const char *str, unsigned long bottom, - unsigned long top) -{ - unsigned long first; - mm_segment_t fs; - int i; - - /* - * We need to switch to kernel mode so that we can use __get_user - * to safely read from kernel space. Note that we now dump the - * code first, just in case the backtrace kills us. - */ - fs = get_fs(); - set_fs(KERNEL_DS); - - printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n", - lvl, str, bottom, top); - - for (first = bottom & ~31; first < top; first += 32) { - unsigned long p; - char str[sizeof(" 12345678") * 8 + 1]; - - memset(str, ' ', sizeof(str)); - str[sizeof(str) - 1] = '\0'; - - for (p = first, i = 0; i < 8 && p < top; i++, p += 4) { - if (p >= bottom && p < top) { - unsigned long val; - if (__get_user(val, (unsigned long *)p) == 0) - sprintf(str + i * 9, " %08lx", val); - else - sprintf(str + i * 9, " ????????"); - } - } - printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str); - } - - set_fs(fs); -} - -static void dump_instr(const char *lvl, struct pt_regs *regs) -{ - unsigned long addr = instruction_pointer(regs); - const int width = 8; - mm_segment_t fs; - char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; - int i; - - /* - * We need to switch to kernel mode so that we can use __get_user - * to safely read from kernel space. Note that we now dump the - * code first, just in case the backtrace kills us. - */ - fs = get_fs(); - set_fs(KERNEL_DS); - - for (i = -4; i < 1; i++) { - unsigned int val, bad; - - bad = __get_user(val, &((u32 *)addr)[i]); - - if (!bad) - p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ", - width, val); - else { - p += sprintf(p, "bad PC value"); - break; - } - } - printk(KERN_DEFAULT "%sCode: %s\n", lvl, str); - - set_fs(fs); -} - -static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk, - const char *loglvl) -{ - unsigned int fp; - int ok = 1; - - printk("%sBacktrace: ", loglvl); - - if (!tsk) - tsk = current; - - if (regs) - fp = regs->UCreg_fp; - else if (tsk != current) - fp = thread_saved_fp(tsk); - else - asm("mov %0, fp" : "=r" (fp) : : "cc"); - - if (!fp) { - printk("%sno frame pointer", loglvl); - ok = 0; - } else if (verify_stack(fp)) { - printk("%sinvalid frame pointer 0x%08x", loglvl, fp); - ok = 0; - } else if (fp < (unsigned long)end_of_stack(tsk)) - printk("%sframe pointer underflow", loglvl); - printk("%s\n", loglvl); - - if (ok) - c_backtrace(fp, loglvl); -} - -void show_stack(struct task_struct *tsk, unsigned long *sp, - const char *loglvl) -{ - dump_backtrace(NULL, tsk, loglvl); - barrier(); -} - -static int __die(const char *str, int err, struct thread_info *thread, - struct pt_regs *regs) -{ - struct task_struct *tsk = thread->task; - static int die_counter; - int ret; - - printk(KERN_EMERG "Internal error: %s: %x [#%d]\n", - str, err, ++die_counter); - - /* trap and error numbers are mostly meaningless on UniCore */ - ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \ - SIGSEGV); - if (ret == NOTIFY_STOP) - return ret; - - print_modules(); - __show_regs(regs); - printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n", - TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1); - - if (!user_mode(regs) || in_interrupt()) { - dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp, - THREAD_SIZE + (unsigned long)task_stack_page(tsk)); - dump_backtrace(regs, tsk, KERN_EMERG); - dump_instr(KERN_EMERG, regs); - } - - return ret; -} - -DEFINE_SPINLOCK(die_lock); - -/* - * This function is protected against re-entrancy. - */ -void die(const char *str, struct pt_regs *regs, int err) -{ - struct thread_info *thread = current_thread_info(); - int ret; - - oops_enter(); - - spin_lock_irq(&die_lock); - console_verbose(); - bust_spinlocks(1); - ret = __die(str, err, thread, regs); - - bust_spinlocks(0); - add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE); - spin_unlock_irq(&die_lock); - oops_exit(); - - if (in_interrupt()) - panic("Fatal exception in interrupt"); - if (panic_on_oops) - panic("Fatal exception"); - if (ret != NOTIFY_STOP) - do_exit(SIGSEGV); -} - -void uc32_notify_die(const char *str, struct pt_regs *regs, - int sig, int code, void __user *addr, - unsigned long err, unsigned long trap) -{ - if (user_mode(regs)) { - current->thread.error_code = err; - current->thread.trap_no = trap; - - force_sig_fault(sig, code, addr); - } else - die(str, regs, err); -} - -/* - * bad_mode handles the impossible case in the vectors. If you see one of - * these, then it's extremely serious, and could mean you have buggy hardware. - * It never returns, and never tries to sync. We hope that we can at least - * dump out some state information... - */ -asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason) -{ - console_verbose(); - - printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason); - - die("Oops - bad mode", regs, 0); - local_irq_disable(); - panic("bad mode"); -} - -void __pte_error(const char *file, int line, unsigned long val) -{ - printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val); -} - -void __pmd_error(const char *file, int line, unsigned long val) -{ - printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val); -} - -void __pgd_error(const char *file, int line, unsigned long val) -{ - printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val); -} - -asmlinkage void __div0(void) -{ - printk(KERN_DEFAULT "Division by zero in kernel.\n"); - dump_stack(); -} -EXPORT_SYMBOL(__div0); - -void abort(void) -{ - BUG(); - - /* if that doesn't kill us, halt */ - panic("Oops failed to kill thread"); -} - -void __init trap_init(void) -{ - return; -} - -void __init early_trap_init(void) -{ - unsigned long vectors = VECTORS_BASE; - - /* - * Copy the vectors, stubs (in entry-unicore.S) - * into the vector page, mapped at 0xffff0000, and ensure these - * are visible to the instruction stream. - */ - memcpy((void *)vectors, - __vectors_start, - __vectors_end - __vectors_start); - memcpy((void *)vectors + 0x200, - __stubs_start, - __stubs_end - __stubs_start); - - early_signal_init(); - - flush_icache_range(vectors, vectors + PAGE_SIZE); -} diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S deleted file mode 100644 index 6fb320b337ef..000000000000 --- a/arch/unicore32/kernel/vmlinux.lds.S +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/kernel/vmlinux.lds.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#include <asm-generic/vmlinux.lds.h> -#include <asm/thread_info.h> -#include <asm/memory.h> -#include <asm/page.h> -#include <asm/cache.h> - -OUTPUT_ARCH(unicore32) -ENTRY(stext) - -jiffies = jiffies_64; - -SECTIONS -{ - . = PAGE_OFFSET + KERNEL_IMAGE_START; - - _text = .; - __init_begin = .; - HEAD_TEXT_SECTION - INIT_TEXT_SECTION(PAGE_SIZE) - INIT_DATA_SECTION(16) - PERCPU_SECTION(L1_CACHE_BYTES) - __init_end = .; - - _stext = .; - .text : { /* Real text segment */ - TEXT_TEXT - SCHED_TEXT - CPUIDLE_TEXT - LOCK_TEXT - - *(.fixup) - *(.gnu.warning) - } - _etext = .; - - _sdata = .; - RO_DATA(PAGE_SIZE) - RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) - _edata = .; - - EXCEPTION_TABLE(L1_CACHE_BYTES) - - BSS_SECTION(0, 0, 0) - _end = .; - - STABS_DEBUG - DWARF_DEBUG - - DISCARDS /* Exit code and data */ -} diff --git a/arch/unicore32/lib/Makefile b/arch/unicore32/lib/Makefile deleted file mode 100644 index 5af06645b8f0..000000000000 --- a/arch/unicore32/lib/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# linux/arch/unicore32/lib/Makefile -# -# Copyright (C) 2001-2010 GUAN Xue-tao -# - -lib-y := backtrace.o delay.o findbit.o -lib-y += strncpy_from_user.o strnlen_user.o -lib-y += clear_user.o copy_page.o -lib-y += copy_from_user.o copy_to_user.o - -GNU_LIBC_A = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libc.a) -GNU_LIBC_A_OBJS := memchr.o memcpy.o memmove.o memset.o -GNU_LIBC_A_OBJS += strchr.o strrchr.o -GNU_LIBC_A_OBJS += rawmemchr.o # needed by strrchr.o - -GNU_LIBGCC_A = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a) -GNU_LIBGCC_A_OBJS := _ashldi3.o _ashrdi3.o _lshrdi3.o -GNU_LIBGCC_A_OBJS += _divsi3.o _modsi3.o _ucmpdi2.o _umodsi3.o _udivsi3.o - -lib-y += $(GNU_LIBC_A_OBJS) $(GNU_LIBGCC_A_OBJS) - -$(addprefix $(obj)/, $(GNU_LIBC_A_OBJS)): - $(Q)$(AR) p $(GNU_LIBC_A) $(notdir $@) > $@ - -$(addprefix $(obj)/, $(GNU_LIBGCC_A_OBJS)): - $(Q)$(AR) p $(GNU_LIBGCC_A) $(notdir $@) > $@ diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S deleted file mode 100644 index 6221944b81f3..000000000000 --- a/arch/unicore32/lib/backtrace.S +++ /dev/null @@ -1,168 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/backtrace.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <asm/assembler.h> - .text - -@ fp is 0 or stack frame - -#define frame v4 -#define sv_fp v5 -#define sv_pc v6 -#define offset v8 -#define loglvl v9 - -ENTRY(__backtrace) - mov r0, fp - -ENTRY(c_backtrace) - -#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) - mov pc, lr -ENDPROC(__backtrace) -ENDPROC(c_backtrace) -#else - stm.w (v4 - v10, lr), [sp-] @ Save an extra register - @ so we have a location... - mov.a frame, r0 @ if frame pointer is zero - beq no_frame @ we have no stack frames - mov loglvl, r1 - -1: stm.w (pc), [sp-] @ calculate offset of PC stored - ldw.w r0, [sp]+, #4 @ by stmfd for this CPU - adr r1, 1b - sub offset, r0, r1 - -/* - * Stack frame layout: - * optionally saved caller registers (r4 - r10) - * saved fp - * saved sp - * saved lr - * frame => saved pc - * optionally saved arguments (r0 - r3) - * saved sp => <next word> - * - * Functions start with the following code sequence: - * mov ip, sp - * stm.w (r0 - r3), [sp-] (optional) - * corrected pc => stm.w sp, (..., fp, ip, lr, pc) - */ -for_each_frame: - -1001: ldw sv_pc, [frame+], #0 @ get saved pc -1002: ldw sv_fp, [frame+], #-12 @ get saved fp - - sub sv_pc, sv_pc, offset @ Correct PC for prefetching - -1003: ldw r2, [sv_pc+], #-4 @ if stmfd sp, {args} exists, - ldw r3, .Ldsi+4 @ adjust saved 'pc' back one - cxor.a r3, r2 >> #14 @ instruction - beq 201f - sub r0, sv_pc, #4 @ allow for mov - b 202f -201: - sub r0, sv_pc, #8 @ allow for mov + stmia -202: - ldw r1, [frame+], #-4 @ get saved lr - mov r2, frame - b.l dump_backtrace_entry - - ldw r1, [sv_pc+], #-4 @ if stmfd sp, {args} exists, - ldw r3, .Ldsi+4 - cxor.a r3, r1 >> #14 - bne 1004f - ldw r0, [frame+], #-8 @ get sp - sub r0, r0, #4 @ point at the last arg - b.l .Ldumpstm @ dump saved registers - -1004: ldw r1, [sv_pc+], #0 @ if stmfd {, fp, ip, lr, pc} - ldw r3, .Ldsi @ instruction exists, - cxor.a r3, r1 >> #14 - bne 201f - sub r0, frame, #16 - b.l .Ldumpstm @ dump saved registers -201: - cxor.a sv_fp, #0 @ zero saved fp means - beq no_frame @ no further frames - - csub.a sv_fp, frame @ next frame must be - mov frame, sv_fp @ above the current frame - bua for_each_frame - -1006: adr r0, .Lbad - mov r1, loglvl - mov r2, frame - b.l printk -no_frame: ldm.w (v4 - v10, pc), [sp]+ -ENDPROC(__backtrace) -ENDPROC(c_backtrace) - - .pushsection __ex_table,"a" - .align 3 - .long 1001b, 1006b - .long 1002b, 1006b - .long 1003b, 1006b - .long 1004b, 1006b - .popsection - -#define instr v4 -#define reg v5 -#define stack v6 - -.Ldumpstm: stm.w (instr, reg, stack, v7, lr), [sp-] - mov stack, r0 - mov instr, r1 - mov reg, #14 - mov v7, #0 -1: mov r3, #1 - csub.a reg, #8 - bne 201f - sub reg, reg, #3 -201: - cand.a instr, r3 << reg - beq 2f - add v7, v7, #1 - cxor.a v7, #6 - cmoveq v7, #1 - bne 201f - adr r0, .Lcr - mov r1, loglvl - b.l printk -201: - ldw.w r3, [stack]+, #-4 - mov r2, reg - csub.a r2, #8 - bsl 201f - sub r2, r2, #3 -201: - cand.a instr, #0x40 @ if H is 1, high 16 regs - beq 201f - add r2, r2, #0x10 @ so r2 need add 16 -201: - adr r0, .Lfp - mov r1, loglvl - b.l printk -2: sub.a reg, reg, #1 - bns 1b - cxor.a v7, #0 - beq 201f - adr r0, .Lcr - mov r1, loglvl - b.l printk -201: ldm.w (instr, reg, stack, v7, pc), [sp]+ - -.Lfp: .asciz "%sr%d:%08x " -.Lcr: .asciz "%s\n" -.Lbad: .asciz "%sBacktrace aborted due to bad frame pointer <%p>\n" - .align -.Ldsi: .word 0x92eec000 >> 14 @ stm.w sp, (... fp, ip, lr, pc) - .word 0x92e10000 >> 14 @ stm.w sp, () - -#endif diff --git a/arch/unicore32/lib/clear_user.S b/arch/unicore32/lib/clear_user.S deleted file mode 100644 index c6ca431b1090..000000000000 --- a/arch/unicore32/lib/clear_user.S +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/clear_user.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <asm/assembler.h> - - .text - -/* Prototype: int __clear_user(void *addr, size_t sz) - * Purpose : clear some user memory - * Params : addr - user memory address to clear - * : sz - number of bytes to clear - * Returns : number of bytes NOT cleared - */ -WEAK(__clear_user) - stm.w (lr), [sp-] - stm.w (r1), [sp-] - mov r2, #0 - csub.a r1, #4 - bsl 2f - and.a ip, r0, #3 - beq 1f - csub.a ip, #2 - strusr r2, r0, 1 - strusr r2, r0, 1, el - strusr r2, r0, 1, sl - rsub ip, ip, #4 - sub r1, r1, ip @ 7 6 5 4 3 2 1 -1: sub.a r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 - strusr r2, r0, 4, ns, rept=2 - bns 1b - add.a r1, r1, #4 @ 3 2 1 0 -1 -2 -3 - strusr r2, r0, 4, ns -2: cand.a r1, #2 @ 1x 1x 0x 0x 1x 1x 0x - strusr r2, r0, 1, ne, rept=2 - cand.a r1, #1 @ x1 x0 x1 x0 x1 x0 x1 - beq 3f -USER( stb.u r2, [r0]) -3: mov r0, #0 - ldm.w (r1), [sp]+ - ldm.w (pc), [sp]+ -ENDPROC(__clear_user) - - .pushsection .fixup,"ax" - .align 0 -9001: ldm.w (r0), [sp]+ - ldm.w (pc), [sp]+ - .popsection - diff --git a/arch/unicore32/lib/copy_from_user.S b/arch/unicore32/lib/copy_from_user.S deleted file mode 100644 index affb43920ac0..000000000000 --- a/arch/unicore32/lib/copy_from_user.S +++ /dev/null @@ -1,101 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/copy_from_user.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -/* - * Prototype: - * - * size_t raw_copy_from_user(void *to, const void *from, size_t n) - * - * Purpose: - * - * copy a block to kernel memory from user memory - * - * Params: - * - * to = kernel memory - * from = user memory - * n = number of bytes to copy - * - * Return value: - * - * Number of bytes NOT copied. - */ - - .macro ldr1w ptr reg abort - ldrusr \reg, \ptr, 4, abort=\abort - .endm - - .macro ldr4w ptr reg1 reg2 reg3 reg4 abort -100: ldm.w (\reg1, \reg2, \reg3, \reg4), [\ptr]+ - .pushsection __ex_table, "a" - .align 3 - .long 100b, \abort - .popsection - .endm - - .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort -100: ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+ - .pushsection __ex_table, "a" - .align 3 - .long 100b, \abort - .popsection - .endm - - .macro ldr1b ptr reg cond=al abort - ldrusr \reg, \ptr, 1, \cond, abort=\abort - .endm - - .macro str1w ptr reg abort - stw.w \reg, [\ptr]+, #4 - .endm - - .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort - stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+ - .endm - - .macro str1b ptr reg cond=al abort - .ifnc \cond, al - b\cond 201f - b 202f - .endif -201: stb.w \reg, [\ptr]+, #1 -202: - .endm - - .macro enter - mov r3, #0 - stm.w (r0, r2, r3), [sp-] - .endm - - .macro exit - add sp, sp, #8 - ldm.w (r0), [sp]+ - mov pc, lr - .endm - - .text - -ENTRY(raw_copy_from_user) - -#include "copy_template.S" - -ENDPROC(raw_copy_from_user) - - .pushsection .fixup,"ax" - .align 0 - copy_abort_preamble - ldm.w (r1, r2, r3), [sp]+ - sub r0, r0, r1 - rsub r0, r0, r2 - copy_abort_end - .popsection - diff --git a/arch/unicore32/lib/copy_page.S b/arch/unicore32/lib/copy_page.S deleted file mode 100644 index dc163f2d1af0..000000000000 --- a/arch/unicore32/lib/copy_page.S +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/copy_page.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * ASM optimised string functions - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <generated/asm-offsets.h> -#include <asm/cache.h> - -#define COPY_COUNT (PAGE_SZ/256) - - .text - .align 5 -/* - * UniCore optimised copy_page routine - */ -ENTRY(copy_page) - stm.w (r17 - r19, lr), [sp-] - mov r17, r0 - mov r18, r1 - mov r19, #COPY_COUNT -1: - .rept 4 - ldm.w (r0 - r15), [r18]+ - stm.w (r0 - r15), [r17]+ - .endr - sub.a r19, r19, #1 - bne 1b - ldm.w (r17 - r19, pc), [sp]+ -ENDPROC(copy_page) diff --git a/arch/unicore32/lib/copy_template.S b/arch/unicore32/lib/copy_template.S deleted file mode 100644 index 02a7aef83fbf..000000000000 --- a/arch/unicore32/lib/copy_template.S +++ /dev/null @@ -1,211 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/copy_template.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -/* - * Theory of operation - * ------------------- - * - * This file provides the core code for a forward memory copy used in - * the implementation of memcopy(), copy_to_user() and copy_from_user(). - * - * The including file must define the following accessor macros - * according to the need of the given function: - * - * ldr1w ptr reg abort - * - * This loads one word from 'ptr', stores it in 'reg' and increments - * 'ptr' to the next word. The 'abort' argument is used for fixup tables. - * - * ldr4w ptr reg1 reg2 reg3 reg4 abort - * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort - * - * This loads four or eight words starting from 'ptr', stores them - * in provided registers and increments 'ptr' past those words. - * The'abort' argument is used for fixup tables. - * - * ldr1b ptr reg cond abort - * - * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte. - * It also must apply the condition code if provided, otherwise the - * "al" condition is assumed by default. - * - * str1w ptr reg abort - * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort - * str1b ptr reg cond abort - * - * Same as their ldr* counterparts, but data is stored to 'ptr' location - * rather than being loaded. - * - * enter - * - * Preserve the provided registers on the stack plus any additional - * data as needed by the implementation including this code. Called - * upon code entry. - * - * exit - * - * Restore registers with the values previously saved with the - * 'preserv' macro. Called upon code termination. - */ - - - enter - - sub.a r2, r2, #4 - bsl 8f - and.a ip, r0, #3 - bne 9f - and.a ip, r1, #3 - bne 10f - -1: sub.a r2, r2, #(28) - stm.w (r5 - r8), [sp-] - bsl 5f - -3: -4: ldr8w r1, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f - sub.a r2, r2, #32 - str8w r0, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f - beg 3b - -5: and.a ip, r2, #28 - rsub ip, ip, #32 - beq 7f - add pc, pc, ip @ C is always clear here - nop - - ldr1w r1, r3, abort=20f - ldr1w r1, r4, abort=20f - ldr1w r1, r5, abort=20f - ldr1w r1, r6, abort=20f - ldr1w r1, r7, abort=20f - ldr1w r1, r8, abort=20f - ldr1w r1, r11, abort=20f - - add pc, pc, ip - nop - - str1w r0, r3, abort=20f - str1w r0, r4, abort=20f - str1w r0, r5, abort=20f - str1w r0, r6, abort=20f - str1w r0, r7, abort=20f - str1w r0, r8, abort=20f - str1w r0, r11, abort=20f - -7: ldm.w (r5 - r8), [sp]+ - -8: mov.a r2, r2 << #31 - ldr1b r1, r3, ne, abort=21f - ldr1b r1, r4, ea, abort=21f - ldr1b r1, r10, ea, abort=21f - str1b r0, r3, ne, abort=21f - str1b r0, r4, ea, abort=21f - str1b r0, r10, ea, abort=21f - - exit - -9: rsub ip, ip, #4 - csub.a ip, #2 - ldr1b r1, r3, sg, abort=21f - ldr1b r1, r4, eg, abort=21f - ldr1b r1, r11, abort=21f - str1b r0, r3, sg, abort=21f - str1b r0, r4, eg, abort=21f - sub.a r2, r2, ip - str1b r0, r11, abort=21f - bsl 8b - and.a ip, r1, #3 - beq 1b - -10: andn r1, r1, #3 - csub.a ip, #2 - ldr1w r1, r11, abort=21f - beq 17f - bsg 18f - - - .macro forward_copy_shift a b - - sub.a r2, r2, #28 - bsl 14f - -11: stm.w (r5 - r9), [sp-] - -12: - ldr4w r1, r4, r5, r6, r7, abort=19f - mov r3, r11 pull #\a - sub.a r2, r2, #32 - ldr4w r1, r8, r9, r10, r11, abort=19f - or r3, r3, r4 push #\b - mov r4, r4 pull #\a - or r4, r4, r5 push #\b - mov r5, r5 pull #\a - or r5, r5, r6 push #\b - mov r6, r6 pull #\a - or r6, r6, r7 push #\b - mov r7, r7 pull #\a - or r7, r7, r8 push #\b - mov r8, r8 pull #\a - or r8, r8, r9 push #\b - mov r9, r9 pull #\a - or r9, r9, r10 push #\b - mov r10, r10 pull #\a - or r10, r10, r11 push #\b - str8w r0, r3, r4, r5, r6, r7, r8, r9, r10, , abort=19f - beg 12b - - ldm.w (r5 - r9), [sp]+ - -14: and.a ip, r2, #28 - beq 16f - -15: mov r3, r11 pull #\a - ldr1w r1, r11, abort=21f - sub.a ip, ip, #4 - or r3, r3, r11 push #\b - str1w r0, r3, abort=21f - bsg 15b - -16: sub r1, r1, #(\b / 8) - b 8b - - .endm - - - forward_copy_shift a=8 b=24 - -17: forward_copy_shift a=16 b=16 - -18: forward_copy_shift a=24 b=8 - - -/* - * Abort preamble and completion macros. - * If a fixup handler is required then those macros must surround it. - * It is assumed that the fixup code will handle the private part of - * the exit macro. - */ - - .macro copy_abort_preamble -19: ldm.w (r5 - r9), [sp]+ - b 21f -299: .word 0 @ store lr - @ to avoid function call in fixup -20: ldm.w (r5 - r8), [sp]+ -21: - adr r1, 299b - stw lr, [r1] - .endm - - .macro copy_abort_end - adr lr, 299b - ldw pc, [lr] - .endm - diff --git a/arch/unicore32/lib/copy_to_user.S b/arch/unicore32/lib/copy_to_user.S deleted file mode 100644 index c867f08f89ce..000000000000 --- a/arch/unicore32/lib/copy_to_user.S +++ /dev/null @@ -1,93 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/copy_to_user.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -/* - * Prototype: - * - * size_t raw_copy_to_user(void *to, const void *from, size_t n) - * - * Purpose: - * - * copy a block to user memory from kernel memory - * - * Params: - * - * to = user memory - * from = kernel memory - * n = number of bytes to copy - * - * Return value: - * - * Number of bytes NOT copied. - */ - - .macro ldr1w ptr reg abort - ldw.w \reg, [\ptr]+, #4 - .endm - - .macro ldr4w ptr reg1 reg2 reg3 reg4 abort - ldm.w (\reg1, \reg2, \reg3, \reg4), [\ptr]+ - .endm - - .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort - ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+ - .endm - - .macro ldr1b ptr reg cond=al abort - notcond \cond, .+8 - ldb.w \reg, [\ptr]+, #1 - .endm - - .macro str1w ptr reg abort - strusr \reg, \ptr, 4, abort=\abort - .endm - - .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort -100: stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+ - - .pushsection __ex_table, "a" - .long 100b, \abort - .popsection - .endm - - .macro str1b ptr reg cond=al abort - strusr \reg, \ptr, 1, \cond, abort=\abort - .endm - - .macro enter - mov r3, #0 - stm.w (r0, r2, r3), [sp-] - .endm - - .macro exit - add sp, sp, #8 - ldm.w (r0), [sp]+ - mov pc, lr - .endm - - .text - -WEAK(raw_copy_to_user) - -#include "copy_template.S" - -ENDPROC(raw_copy_to_user) - - .pushsection .fixup,"ax" - .align 0 - copy_abort_preamble - ldm.w (r1, r2, r3), [sp]+ - sub r0, r0, r1 - rsub r0, r0, r2 - copy_abort_end - .popsection - diff --git a/arch/unicore32/lib/delay.S b/arch/unicore32/lib/delay.S deleted file mode 100644 index 6a359dd034e5..000000000000 --- a/arch/unicore32/lib/delay.S +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/delay.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/param.h> - .text - -.LC0: .word loops_per_jiffy -.LC1: .word (2199023*HZ)>>11 - -/* - * r0 <= 2000 - * lpj <= 0x01ffffff (max. 3355 bogomips) - * HZ <= 1000 - */ - -ENTRY(__udelay) - ldw r2, .LC1 - mul r0, r2, r0 -ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 - ldw r2, .LC0 - ldw r2, [r2] @ max = 0x01ffffff - mov r0, r0 >> #14 @ max = 0x0001ffff - mov r2, r2 >> #10 @ max = 0x00007fff - mul r0, r2, r0 @ max = 2^32-1 - mov.a r0, r0 >> #6 - cmoveq pc, lr - -/* - * loops = r0 * HZ * loops_per_jiffy / 1000000 - * - * Oh, if only we had a cycle counter... - */ - -@ Delay routine -ENTRY(__delay) - sub.a r0, r0, #2 - bua __delay - mov pc, lr -ENDPROC(__udelay) -ENDPROC(__const_udelay) -ENDPROC(__delay) diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S deleted file mode 100644 index 42f1282670d2..000000000000 --- a/arch/unicore32/lib/findbit.S +++ /dev/null @@ -1,97 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/findbit.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <asm/assembler.h> - .text - -/* - * Purpose : Find a 'zero' bit - * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit); - */ -ENTRY(find_first_zero_bit) - cxor.a r1, #0 - beq 3f - mov r2, #0 -1: ldb r3, [r0+], r2 >> #3 - xor.a r3, r3, #0xff @ invert bits - bne .L_found @ any now set - found zero bit - add r2, r2, #8 @ next bit pointer -2: csub.a r2, r1 @ any more? - bub 1b -3: mov r0, r1 @ no free bits - mov pc, lr -ENDPROC(find_first_zero_bit) - -/* - * Purpose : Find next 'zero' bit - * Prototype: int find_next_zero_bit - * (void *addr, unsigned int maxbit, int offset) - */ -ENTRY(find_next_zero_bit) - cxor.a r1, #0 - beq 3b - and.a ip, r2, #7 - beq 1b @ If new byte, goto old routine - ldb r3, [r0+], r2 >> #3 - xor r3, r3, #0xff @ now looking for a 1 bit - mov.a r3, r3 >> ip @ shift off unused bits - bne .L_found - or r2, r2, #7 @ if zero, then no bits here - add r2, r2, #1 @ align bit pointer - b 2b @ loop for next bit -ENDPROC(find_next_zero_bit) - -/* - * Purpose : Find a 'one' bit - * Prototype: int find_first_bit - * (const unsigned long *addr, unsigned int maxbit); - */ -ENTRY(find_first_bit) - cxor.a r1, #0 - beq 3f - mov r2, #0 -1: ldb r3, [r0+], r2 >> #3 - mov.a r3, r3 - bne .L_found @ any now set - found zero bit - add r2, r2, #8 @ next bit pointer -2: csub.a r2, r1 @ any more? - bub 1b -3: mov r0, r1 @ no free bits - mov pc, lr -ENDPROC(find_first_bit) - -/* - * Purpose : Find next 'one' bit - * Prototype: int find_next_zero_bit - * (void *addr, unsigned int maxbit, int offset) - */ -ENTRY(find_next_bit) - cxor.a r1, #0 - beq 3b - and.a ip, r2, #7 - beq 1b @ If new byte, goto old routine - ldb r3, [r0+], r2 >> #3 - mov.a r3, r3 >> ip @ shift off unused bits - bne .L_found - or r2, r2, #7 @ if zero, then no bits here - add r2, r2, #1 @ align bit pointer - b 2b @ loop for next bit -ENDPROC(find_next_bit) - -/* - * One or more bits in the LSB of r3 are assumed to be set. - */ -.L_found: - rsub r1, r3, #0 - and r3, r3, r1 - cntlz r3, r3 - rsub r3, r3, #31 - add r0, r2, r3 - mov pc, lr - diff --git a/arch/unicore32/lib/strncpy_from_user.S b/arch/unicore32/lib/strncpy_from_user.S deleted file mode 100644 index f227b8227a4c..000000000000 --- a/arch/unicore32/lib/strncpy_from_user.S +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/strncpy_from_user.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> - - .text - .align 5 - -/* - * Copy a string from user space to kernel space. - * r0 = dst, r1 = src, r2 = byte length - * returns the number of characters copied (strlen of copied string), - * -EFAULT on exception, or "len" if we fill the whole buffer - */ -ENTRY(__strncpy_from_user) - mov ip, r1 -1: sub.a r2, r2, #1 - ldrusr r3, r1, 1, ns - bfs 2f - stb.w r3, [r0]+, #1 - cxor.a r3, #0 - bne 1b - sub r1, r1, #1 @ take NUL character out of count -2: sub r0, r1, ip - mov pc, lr -ENDPROC(__strncpy_from_user) - - .pushsection .fixup,"ax" - .align 0 -9001: mov r3, #0 - stb r3, [r0+], #0 @ null terminate - mov r0, #-EFAULT - mov pc, lr - .popsection - diff --git a/arch/unicore32/lib/strnlen_user.S b/arch/unicore32/lib/strnlen_user.S deleted file mode 100644 index c836b12776fe..000000000000 --- a/arch/unicore32/lib/strnlen_user.S +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/lib/strnlen_user.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> - - .text - .align 5 - -/* Prototype: unsigned long __strnlen_user(const char *str, long n) - * Purpose : get length of a string in user memory - * Params : str - address of string in user memory - * Returns : length of string *including terminator* - * or zero on exception, or n + 1 if too long - */ -ENTRY(__strnlen_user) - mov r2, r0 -1: - ldrusr r3, r0, 1 - cxor.a r3, #0 - beq 2f - sub.a r1, r1, #1 - bne 1b - add r0, r0, #1 -2: sub r0, r0, r2 - mov pc, lr -ENDPROC(__strnlen_user) - - .pushsection .fixup,"ax" - .align 0 -9001: mov r0, #0 - mov pc, lr - .popsection diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig deleted file mode 100644 index 82759b6aba67..000000000000 --- a/arch/unicore32/mm/Kconfig +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -comment "Processor Type" - -# Select CPU types depending on the architecture selected. This selects -# which CPUs we support in the kernel image, and the compiler instruction -# optimiser behaviour. - -config CPU_UCV2 - def_bool y - -comment "Processor Features" - -config CPU_ICACHE_DISABLE - bool "Disable I-Cache (I-bit)" - help - Say Y here to disable the processor instruction cache. Unless - you have a reason not to or are unsure, say N. - -config CPU_DCACHE_DISABLE - bool "Disable D-Cache (D-bit)" - help - Say Y here to disable the processor data cache. Unless - you have a reason not to or are unsure, say N. - -config CPU_DCACHE_WRITETHROUGH - bool "Force write through D-cache" - help - Say Y here to use the data cache in writethrough mode. Unless you - specifically require this or are unsure, say N. - -config CPU_DCACHE_LINE_DISABLE - bool "Disable D-cache line ops" - default y - help - Say Y here to disable the data cache line operations. - -config CPU_TLB_SINGLE_ENTRY_DISABLE - bool "Disable TLB single entry ops" - default y - help - Say Y here to disable the TLB single entry operations. diff --git a/arch/unicore32/mm/Makefile b/arch/unicore32/mm/Makefile deleted file mode 100644 index 8106260583ab..000000000000 --- a/arch/unicore32/mm/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux unicore-specific parts of the memory manager. -# - -obj-y := extable.o fault.o init.o pgd.o mmu.o -obj-y += flush.o ioremap.o - -obj-$(CONFIG_MODULES) += proc-syms.o - -obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o - -obj-$(CONFIG_CPU_UCV2) += cache-ucv2.o tlb-ucv2.o proc-ucv2.o - diff --git a/arch/unicore32/mm/alignment.c b/arch/unicore32/mm/alignment.c deleted file mode 100644 index 2ea98f7a4156..000000000000 --- a/arch/unicore32/mm/alignment.c +++ /dev/null @@ -1,524 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/alignment.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -/* - * TODO: - * FPU ldm/stm not handling - */ -#include <linux/compiler.h> -#include <linux/kernel.h> -#include <linux/sched/debug.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/uaccess.h> -#include <linux/pgtable.h> - -#include <asm/tlbflush.h> -#include <asm/unaligned.h> - -#include "mm.h" - -#define CODING_BITS(i) (i & 0xe0000120) - -#define LDST_P_BIT(i) (i & (1 << 28)) /* Preindex */ -#define LDST_U_BIT(i) (i & (1 << 27)) /* Add offset */ -#define LDST_W_BIT(i) (i & (1 << 25)) /* Writeback */ -#define LDST_L_BIT(i) (i & (1 << 24)) /* Load */ - -#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 27)) == 0) - -#define LDSTH_I_BIT(i) (i & (1 << 26)) /* half-word immed */ -#define LDM_S_BIT(i) (i & (1 << 26)) /* write ASR from BSR */ -#define LDM_H_BIT(i) (i & (1 << 6)) /* select r0-r15 or r16-r31 */ - -#define RN_BITS(i) ((i >> 19) & 31) /* Rn */ -#define RD_BITS(i) ((i >> 14) & 31) /* Rd */ -#define RM_BITS(i) (i & 31) /* Rm */ - -#define REGMASK_BITS(i) (((i & 0x7fe00) >> 3) | (i & 0x3f)) -#define OFFSET_BITS(i) (i & 0x03fff) - -#define SHIFT_BITS(i) ((i >> 9) & 0x1f) -#define SHIFT_TYPE(i) (i & 0xc0) -#define SHIFT_LSL 0x00 -#define SHIFT_LSR 0x40 -#define SHIFT_ASR 0x80 -#define SHIFT_RORRRX 0xc0 - -union offset_union { - unsigned long un; - signed long sn; -}; - -#define TYPE_ERROR 0 -#define TYPE_FAULT 1 -#define TYPE_LDST 2 -#define TYPE_DONE 3 -#define TYPE_SWAP 4 -#define TYPE_COLS 5 /* Coprocessor load/store */ - -#define get8_unaligned_check(val, addr, err) \ - __asm__( \ - "1: ldb.u %1, [%2], #1\n" \ - "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, #1\n" \ - " b 2b\n" \ - " .popsection\n" \ - " .pushsection __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .popsection\n" \ - : "=r" (err), "=&r" (val), "=r" (addr) \ - : "0" (err), "2" (addr)) - -#define get8t_unaligned_check(val, addr, err) \ - __asm__( \ - "1: ldb.u %1, [%2], #1\n" \ - "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, #1\n" \ - " b 2b\n" \ - " .popsection\n" \ - " .pushsection __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .popsection\n" \ - : "=r" (err), "=&r" (val), "=r" (addr) \ - : "0" (err), "2" (addr)) - -#define get16_unaligned_check(val, addr) \ - do { \ - unsigned int err = 0, v, a = addr; \ - get8_unaligned_check(val, a, err); \ - get8_unaligned_check(v, a, err); \ - val |= v << 8; \ - if (err) \ - goto fault; \ - } while (0) - -#define put16_unaligned_check(val, addr) \ - do { \ - unsigned int err = 0, v = val, a = addr; \ - __asm__( \ - "1: stb.u %1, [%2], #1\n" \ - " mov %1, %1 >> #8\n" \ - "2: stb.u %1, [%2]\n" \ - "3:\n" \ - " .pushsection .fixup,\"ax\"\n" \ - " .align 2\n" \ - "4: mov %0, #1\n" \ - " b 3b\n" \ - " .popsection\n" \ - " .pushsection __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 4b\n" \ - " .long 2b, 4b\n" \ - " .popsection\n" \ - : "=r" (err), "=&r" (v), "=&r" (a) \ - : "0" (err), "1" (v), "2" (a)); \ - if (err) \ - goto fault; \ - } while (0) - -#define __put32_unaligned_check(ins, val, addr) \ - do { \ - unsigned int err = 0, v = val, a = addr; \ - __asm__( \ - "1: "ins" %1, [%2], #1\n" \ - " mov %1, %1 >> #8\n" \ - "2: "ins" %1, [%2], #1\n" \ - " mov %1, %1 >> #8\n" \ - "3: "ins" %1, [%2], #1\n" \ - " mov %1, %1 >> #8\n" \ - "4: "ins" %1, [%2]\n" \ - "5:\n" \ - " .pushsection .fixup,\"ax\"\n" \ - " .align 2\n" \ - "6: mov %0, #1\n" \ - " b 5b\n" \ - " .popsection\n" \ - " .pushsection __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 6b\n" \ - " .long 2b, 6b\n" \ - " .long 3b, 6b\n" \ - " .long 4b, 6b\n" \ - " .popsection\n" \ - : "=r" (err), "=&r" (v), "=&r" (a) \ - : "0" (err), "1" (v), "2" (a)); \ - if (err) \ - goto fault; \ - } while (0) - -#define get32_unaligned_check(val, addr) \ - do { \ - unsigned int err = 0, v, a = addr; \ - get8_unaligned_check(val, a, err); \ - get8_unaligned_check(v, a, err); \ - val |= v << 8; \ - get8_unaligned_check(v, a, err); \ - val |= v << 16; \ - get8_unaligned_check(v, a, err); \ - val |= v << 24; \ - if (err) \ - goto fault; \ - } while (0) - -#define put32_unaligned_check(val, addr) \ - __put32_unaligned_check("stb.u", val, addr) - -#define get32t_unaligned_check(val, addr) \ - do { \ - unsigned int err = 0, v, a = addr; \ - get8t_unaligned_check(val, a, err); \ - get8t_unaligned_check(v, a, err); \ - val |= v << 8; \ - get8t_unaligned_check(v, a, err); \ - val |= v << 16; \ - get8t_unaligned_check(v, a, err); \ - val |= v << 24; \ - if (err) \ - goto fault; \ - } while (0) - -#define put32t_unaligned_check(val, addr) \ - __put32_unaligned_check("stb.u", val, addr) - -static void -do_alignment_finish_ldst(unsigned long addr, unsigned long instr, - struct pt_regs *regs, union offset_union offset) -{ - if (!LDST_U_BIT(instr)) - offset.un = -offset.un; - - if (!LDST_P_BIT(instr)) - addr += offset.un; - - if (!LDST_P_BIT(instr) || LDST_W_BIT(instr)) - regs->uregs[RN_BITS(instr)] = addr; -} - -static int -do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, - struct pt_regs *regs) -{ - unsigned int rd = RD_BITS(instr); - - /* old value 0x40002120, can't judge swap instr correctly */ - if ((instr & 0x4b003fe0) == 0x40000120) - goto swp; - - if (LDST_L_BIT(instr)) { - unsigned long val; - get16_unaligned_check(val, addr); - - /* signed half-word? */ - if (instr & 0x80) - val = (signed long)((signed short)val); - - regs->uregs[rd] = val; - } else - put16_unaligned_check(regs->uregs[rd], addr); - - return TYPE_LDST; - -swp: - /* only handle swap word - * for swap byte should not active this alignment exception */ - get32_unaligned_check(regs->uregs[RD_BITS(instr)], addr); - put32_unaligned_check(regs->uregs[RM_BITS(instr)], addr); - return TYPE_SWAP; - -fault: - return TYPE_FAULT; -} - -static int -do_alignment_ldrstr(unsigned long addr, unsigned long instr, - struct pt_regs *regs) -{ - unsigned int rd = RD_BITS(instr); - - if (!LDST_P_BIT(instr) && LDST_W_BIT(instr)) - goto trans; - - if (LDST_L_BIT(instr)) - get32_unaligned_check(regs->uregs[rd], addr); - else - put32_unaligned_check(regs->uregs[rd], addr); - return TYPE_LDST; - -trans: - if (LDST_L_BIT(instr)) - get32t_unaligned_check(regs->uregs[rd], addr); - else - put32t_unaligned_check(regs->uregs[rd], addr); - return TYPE_LDST; - -fault: - return TYPE_FAULT; -} - -/* - * LDM/STM alignment handler. - * - * There are 4 variants of this instruction: - * - * B = rn pointer before instruction, A = rn pointer after instruction - * ------ increasing address -----> - * | | r0 | r1 | ... | rx | | - * PU = 01 B A - * PU = 11 B A - * PU = 00 A B - * PU = 10 A B - */ -static int -do_alignment_ldmstm(unsigned long addr, unsigned long instr, - struct pt_regs *regs) -{ - unsigned int rd, rn, pc_correction, reg_correction, nr_regs, regbits; - unsigned long eaddr, newaddr; - - if (LDM_S_BIT(instr)) - goto bad; - - pc_correction = 4; /* processor implementation defined */ - - /* count the number of registers in the mask to be transferred */ - nr_regs = hweight16(REGMASK_BITS(instr)) * 4; - - rn = RN_BITS(instr); - newaddr = eaddr = regs->uregs[rn]; - - if (!LDST_U_BIT(instr)) - nr_regs = -nr_regs; - newaddr += nr_regs; - if (!LDST_U_BIT(instr)) - eaddr = newaddr; - - if (LDST_P_EQ_U(instr)) /* U = P */ - eaddr += 4; - - /* - * This is a "hint" - we already have eaddr worked out by the - * processor for us. - */ - if (addr != eaddr) { - printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, " - "addr = %08lx, eaddr = %08lx\n", - instruction_pointer(regs), instr, addr, eaddr); - show_regs(regs); - } - - if (LDM_H_BIT(instr)) - reg_correction = 0x10; - else - reg_correction = 0x00; - - for (regbits = REGMASK_BITS(instr), rd = 0; regbits; - regbits >>= 1, rd += 1) - if (regbits & 1) { - if (LDST_L_BIT(instr)) - get32_unaligned_check(regs-> - uregs[rd + reg_correction], eaddr); - else - put32_unaligned_check(regs-> - uregs[rd + reg_correction], eaddr); - eaddr += 4; - } - - if (LDST_W_BIT(instr)) - regs->uregs[rn] = newaddr; - return TYPE_DONE; - -fault: - regs->UCreg_pc -= pc_correction; - return TYPE_FAULT; - -bad: - printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n"); - return TYPE_ERROR; -} - -static int -do_alignment(unsigned long addr, unsigned int error_code, struct pt_regs *regs) -{ - union offset_union offset; - unsigned long instr, instrptr; - int (*handler) (unsigned long addr, unsigned long instr, - struct pt_regs *regs); - unsigned int type; - - instrptr = instruction_pointer(regs); - if (instrptr >= PAGE_OFFSET) - instr = *(unsigned long *)instrptr; - else { - __asm__ __volatile__( - "ldw.u %0, [%1]\n" - : "=&r"(instr) - : "r"(instrptr)); - } - - regs->UCreg_pc += 4; - - switch (CODING_BITS(instr)) { - case 0x40000120: /* ldrh or strh */ - if (LDSTH_I_BIT(instr)) - offset.un = (instr & 0x3e00) >> 4 | (instr & 31); - else - offset.un = regs->uregs[RM_BITS(instr)]; - handler = do_alignment_ldrhstrh; - break; - - case 0x60000000: /* ldr or str immediate */ - case 0x60000100: /* ldr or str immediate */ - case 0x60000020: /* ldr or str immediate */ - case 0x60000120: /* ldr or str immediate */ - offset.un = OFFSET_BITS(instr); - handler = do_alignment_ldrstr; - break; - - case 0x40000000: /* ldr or str register */ - offset.un = regs->uregs[RM_BITS(instr)]; - { - unsigned int shiftval = SHIFT_BITS(instr); - - switch (SHIFT_TYPE(instr)) { - case SHIFT_LSL: - offset.un <<= shiftval; - break; - - case SHIFT_LSR: - offset.un >>= shiftval; - break; - - case SHIFT_ASR: - offset.sn >>= shiftval; - break; - - case SHIFT_RORRRX: - if (shiftval == 0) { - offset.un >>= 1; - if (regs->UCreg_asr & PSR_C_BIT) - offset.un |= 1 << 31; - } else - offset.un = offset.un >> shiftval | - offset.un << (32 - shiftval); - break; - } - } - handler = do_alignment_ldrstr; - break; - - case 0x80000000: /* ldm or stm */ - case 0x80000020: /* ldm or stm */ - handler = do_alignment_ldmstm; - break; - - default: - goto bad; - } - - type = handler(addr, instr, regs); - - if (type == TYPE_ERROR || type == TYPE_FAULT) - goto bad_or_fault; - - if (type == TYPE_LDST) - do_alignment_finish_ldst(addr, instr, regs, offset); - - return 0; - -bad_or_fault: - if (type == TYPE_ERROR) - goto bad; - regs->UCreg_pc -= 4; - /* - * We got a fault - fix it up, or die. - */ - do_bad_area(addr, error_code, regs); - return 0; - -bad: - /* - * Oops, we didn't handle the instruction. - * However, we must handle fpu instr firstly. - */ -#ifdef CONFIG_UNICORE_FPU_F64 - /* handle co.load/store */ -#define CODING_COLS 0xc0000000 -#define COLS_OFFSET_BITS(i) (i & 0x1FF) -#define COLS_L_BITS(i) (i & (1<<24)) -#define COLS_FN_BITS(i) ((i>>14) & 31) - if ((instr & 0xe0000000) == CODING_COLS) { - unsigned int fn = COLS_FN_BITS(instr); - unsigned long val = 0; - if (COLS_L_BITS(instr)) { - get32t_unaligned_check(val, addr); - switch (fn) { -#define ASM_MTF(n) case n: \ - __asm__ __volatile__("MTF %0, F" __stringify(n) \ - : : "r"(val)); \ - break; - ASM_MTF(0); ASM_MTF(1); ASM_MTF(2); ASM_MTF(3); - ASM_MTF(4); ASM_MTF(5); ASM_MTF(6); ASM_MTF(7); - ASM_MTF(8); ASM_MTF(9); ASM_MTF(10); ASM_MTF(11); - ASM_MTF(12); ASM_MTF(13); ASM_MTF(14); ASM_MTF(15); - ASM_MTF(16); ASM_MTF(17); ASM_MTF(18); ASM_MTF(19); - ASM_MTF(20); ASM_MTF(21); ASM_MTF(22); ASM_MTF(23); - ASM_MTF(24); ASM_MTF(25); ASM_MTF(26); ASM_MTF(27); - ASM_MTF(28); ASM_MTF(29); ASM_MTF(30); ASM_MTF(31); -#undef ASM_MTF - } - } else { - switch (fn) { -#define ASM_MFF(n) case n: \ - __asm__ __volatile__("MFF %0, F" __stringify(n) \ - : : "r"(val)); \ - break; - ASM_MFF(0); ASM_MFF(1); ASM_MFF(2); ASM_MFF(3); - ASM_MFF(4); ASM_MFF(5); ASM_MFF(6); ASM_MFF(7); - ASM_MFF(8); ASM_MFF(9); ASM_MFF(10); ASM_MFF(11); - ASM_MFF(12); ASM_MFF(13); ASM_MFF(14); ASM_MFF(15); - ASM_MFF(16); ASM_MFF(17); ASM_MFF(18); ASM_MFF(19); - ASM_MFF(20); ASM_MFF(21); ASM_MFF(22); ASM_MFF(23); - ASM_MFF(24); ASM_MFF(25); ASM_MFF(26); ASM_MFF(27); - ASM_MFF(28); ASM_MFF(29); ASM_MFF(30); ASM_MFF(31); -#undef ASM_MFF - } - put32t_unaligned_check(val, addr); - } - return TYPE_COLS; - } -fault: - return TYPE_FAULT; -#endif - printk(KERN_ERR "Alignment trap: not handling instruction " - "%08lx at [<%08lx>]\n", instr, instrptr); - return 1; -} - -/* - * This needs to be done after sysctl_init, otherwise sys/ will be - * overwritten. Actually, this shouldn't be in sys/ at all since - * it isn't a sysctl, and it doesn't contain sysctl information. - */ -static int __init alignment_init(void) -{ - hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, - "alignment exception"); - - return 0; -} - -fs_initcall(alignment_init); diff --git a/arch/unicore32/mm/cache-ucv2.S b/arch/unicore32/mm/cache-ucv2.S deleted file mode 100644 index 2108837d6f4f..000000000000 --- a/arch/unicore32/mm/cache-ucv2.S +++ /dev/null @@ -1,209 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/mm/cache-ucv2.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * This is the "shell" of the UniCore-v2 processor support. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/assembler.h> -#include <asm/page.h> - -#include "proc-macros.S" - -/* - * __cpuc_flush_icache_all() - * __cpuc_flush_kern_all() - * __cpuc_flush_user_all() - * - * Flush the entire cache. - */ -ENTRY(__cpuc_flush_icache_all) - /*FALLTHROUGH*/ -ENTRY(__cpuc_flush_kern_all) - /*FALLTHROUGH*/ -ENTRY(__cpuc_flush_user_all) - mov r0, #0 - movc p0.c5, r0, #14 @ Dcache flush all - nop8 - - mov r0, #0 - movc p0.c5, r0, #20 @ Icache invalidate all - nop8 - - mov pc, lr - -/* - * __cpuc_flush_user_range(start, end, flags) - * - * Flush a range of TLB entries in the specified address space. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - flags - vm_area_struct flags describing address space - */ -ENTRY(__cpuc_flush_user_range) - cxor.a r2, #0 - beq __cpuc_dma_flush_range - -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - andn r0, r0, #CACHE_LINESIZE - 1 @ Safety check - sub r1, r1, r0 - csub.a r1, #MAX_AREA_SIZE - bsg 2f - - andn r1, r1, #CACHE_LINESIZE - 1 - add r1, r1, #CACHE_LINESIZE - -101: dcacheline_flush r0, r11, r12 - - add r0, r0, #CACHE_LINESIZE - sub.a r1, r1, #CACHE_LINESIZE - bns 101b - b 3f -#endif -2: mov ip, #0 - movc p0.c5, ip, #14 @ Dcache flush all - nop8 - -3: mov ip, #0 - movc p0.c5, ip, #20 @ Icache invalidate all - nop8 - - mov pc, lr - -/* - * __cpuc_coherent_kern_range(start,end) - * __cpuc_coherent_user_range(start,end) - * - * Ensure that the I and D caches are coherent within specified - * region. This is typically used when code has been written to - * a memory region, and will be executed. - * - * - start - virtual start address of region - * - end - virtual end address of region - */ -ENTRY(__cpuc_coherent_kern_range) - /* FALLTHROUGH */ -ENTRY(__cpuc_coherent_user_range) -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - andn r0, r0, #CACHE_LINESIZE - 1 @ Safety check - sub r1, r1, r0 - csub.a r1, #MAX_AREA_SIZE - bsg 2f - - andn r1, r1, #CACHE_LINESIZE - 1 - add r1, r1, #CACHE_LINESIZE - - @ r0 va2pa r10 - mov r9, #PAGE_SZ - sub r9, r9, #1 @ PAGE_MASK -101: va2pa r0, r10, r11, r12, r13, 2f @ r10 is PA - b 103f -102: cand.a r0, r9 - beq 101b - -103: movc p0.c5, r10, #11 @ Dcache clean line of R10 - nop8 - - add r0, r0, #CACHE_LINESIZE - add r10, r10, #CACHE_LINESIZE - sub.a r1, r1, #CACHE_LINESIZE - bns 102b - b 3f -#endif -2: mov ip, #0 - movc p0.c5, ip, #10 @ Dcache clean all - nop8 - -3: mov ip, #0 - movc p0.c5, ip, #20 @ Icache invalidate all - nop8 - - mov pc, lr - -/* - * __cpuc_flush_kern_dcache_area(void *addr, size_t size) - * - * - addr - kernel address - * - size - region size - */ -ENTRY(__cpuc_flush_kern_dcache_area) - mov ip, #0 - movc p0.c5, ip, #14 @ Dcache flush all - nop8 - mov pc, lr - -/* - * __cpuc_dma_clean_range(start,end) - * - start - virtual start address of region - * - end - virtual end address of region - */ -ENTRY(__cpuc_dma_clean_range) -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - andn r0, r0, #CACHE_LINESIZE - 1 - sub r1, r1, r0 - andn r1, r1, #CACHE_LINESIZE - 1 - add r1, r1, #CACHE_LINESIZE - - csub.a r1, #MAX_AREA_SIZE - bsg 2f - - @ r0 va2pa r10 - mov r9, #PAGE_SZ - sub r9, r9, #1 @ PAGE_MASK -101: va2pa r0, r10, r11, r12, r13, 2f @ r10 is PA - b 1f -102: cand.a r0, r9 - beq 101b - -1: movc p0.c5, r10, #11 @ Dcache clean line of R10 - nop8 - add r0, r0, #CACHE_LINESIZE - add r10, r10, #CACHE_LINESIZE - sub.a r1, r1, #CACHE_LINESIZE - bns 102b - mov pc, lr -#endif -2: mov ip, #0 - movc p0.c5, ip, #10 @ Dcache clean all - nop8 - - mov pc, lr - -/* - * __cpuc_dma_inv_range(start,end) - * __cpuc_dma_flush_range(start,end) - * - start - virtual start address of region - * - end - virtual end address of region - */ -__cpuc_dma_inv_range: - /* FALLTHROUGH */ -ENTRY(__cpuc_dma_flush_range) -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - andn r0, r0, #CACHE_LINESIZE - 1 - sub r1, r1, r0 - andn r1, r1, #CACHE_LINESIZE - 1 - add r1, r1, #CACHE_LINESIZE - - csub.a r1, #MAX_AREA_SIZE - bsg 2f - - @ r0 va2pa r10 -101: dcacheline_flush r0, r11, r12 - - add r0, r0, #CACHE_LINESIZE - sub.a r1, r1, #CACHE_LINESIZE - bns 101b - mov pc, lr -#endif -2: mov ip, #0 - movc p0.c5, ip, #14 @ Dcache flush all - nop8 - - mov pc, lr - diff --git a/arch/unicore32/mm/extable.c b/arch/unicore32/mm/extable.c deleted file mode 100644 index e53352b41c4a..000000000000 --- a/arch/unicore32/mm/extable.c +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/extable.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/extable.h> -#include <linux/uaccess.h> - -int fixup_exception(struct pt_regs *regs) -{ - const struct exception_table_entry *fixup; - - fixup = search_exception_tables(instruction_pointer(regs)); - if (fixup) - regs->UCreg_pc = fixup->fixup; - - return fixup != NULL; -} diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c deleted file mode 100644 index 7654bddde133..000000000000 --- a/arch/unicore32/mm/fault.c +++ /dev/null @@ -1,481 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/fault.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/extable.h> -#include <linux/signal.h> -#include <linux/mm.h> -#include <linux/hardirq.h> -#include <linux/init.h> -#include <linux/kprobes.h> -#include <linux/uaccess.h> -#include <linux/page-flags.h> -#include <linux/sched/signal.h> -#include <linux/io.h> - -#include <asm/tlbflush.h> - -/* - * Fault status register encodings. We steal bit 31 for our own purposes. - */ -#define FSR_LNX_PF (1 << 31) - -static inline int fsr_fs(unsigned int fsr) -{ - /* xyabcde will be abcde+xy */ - return (fsr & 31) + ((fsr & (3 << 5)) >> 5); -} - -/* - * This is useful to dump out the page tables associated with - * 'addr' in mm 'mm'. - */ -void show_pte(struct mm_struct *mm, unsigned long addr) -{ - pgd_t *pgd; - - if (!mm) - mm = &init_mm; - - printk(KERN_ALERT "pgd = %p\n", mm->pgd); - pgd = pgd_offset(mm, addr); - printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); - - do { - pmd_t *pmd; - pte_t *pte; - - if (pgd_none(*pgd)) - break; - - if (pgd_bad(*pgd)) { - printk("(bad)"); - break; - } - - pmd = pmd_offset((pud_t *) pgd, addr); - if (PTRS_PER_PMD != 1) - printk(", *pmd=%08lx", pmd_val(*pmd)); - - if (pmd_none(*pmd)) - break; - - if (pmd_bad(*pmd)) { - printk("(bad)"); - break; - } - - /* We must not map this if we have highmem enabled */ - if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT))) - break; - - pte = pte_offset_map(pmd, addr); - printk(", *pte=%08lx", pte_val(*pte)); - pte_unmap(pte); - } while (0); - - printk("\n"); -} - -/* - * Oops. The kernel tried to access some page that wasn't present. - */ -static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr, - unsigned int fsr, struct pt_regs *regs) -{ - /* - * Are we prepared to handle this kernel fault? - */ - if (fixup_exception(regs)) - return; - - /* - * No handler, we'll have to terminate things with extreme prejudice. - */ - bust_spinlocks(1); - printk(KERN_ALERT - "Unable to handle kernel %s at virtual address %08lx\n", - (addr < PAGE_SIZE) ? "NULL pointer dereference" : - "paging request", addr); - - show_pte(mm, addr); - die("Oops", regs, fsr); - bust_spinlocks(0); - do_exit(SIGKILL); -} - -/* - * Something tried to access memory that isn't in our memory map.. - * User mode accesses just cause a SIGSEGV - */ -static void __do_user_fault(unsigned long addr, unsigned int fsr, - unsigned int sig, int code, struct pt_regs *regs) -{ - struct task_struct *tsk = current; - - tsk->thread.address = addr; - tsk->thread.error_code = fsr; - tsk->thread.trap_no = 14; - force_sig_fault(sig, code, (void __user *)addr); -} - -void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - struct task_struct *tsk = current; - struct mm_struct *mm = tsk->active_mm; - - /* - * If we are in kernel mode at this point, we - * have no context to handle this fault with. - */ - if (user_mode(regs)) - __do_user_fault(addr, fsr, SIGSEGV, SEGV_MAPERR, regs); - else - __do_kernel_fault(mm, addr, fsr, regs); -} - -#define VM_FAULT_BADMAP 0x010000 -#define VM_FAULT_BADACCESS 0x020000 - -/* - * Check that the permissions on the VMA allow for the fault which occurred. - * If we encountered a write fault, we must have write permission, otherwise - * we allow any permission. - */ -static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) -{ - unsigned int mask = VM_ACCESS_FLAGS; - - if (!(fsr ^ 0x12)) /* write? */ - mask = VM_WRITE; - if (fsr & FSR_LNX_PF) - mask = VM_EXEC; - - return vma->vm_flags & mask ? false : true; -} - -static vm_fault_t __do_pf(struct mm_struct *mm, unsigned long addr, - unsigned int fsr, unsigned int flags, struct task_struct *tsk) -{ - struct vm_area_struct *vma; - vm_fault_t fault; - - vma = find_vma(mm, addr); - fault = VM_FAULT_BADMAP; - if (unlikely(!vma)) - goto out; - if (unlikely(vma->vm_start > addr)) - goto check_stack; - - /* - * Ok, we have a good vm_area for this - * memory access, so we can handle it. - */ -good_area: - if (access_error(fsr, vma)) { - fault = VM_FAULT_BADACCESS; - goto out; - } - - /* - * If for any reason at all we couldn't handle the fault, make - * sure we exit gracefully rather than endlessly redo the fault. - */ - fault = handle_mm_fault(vma, addr & PAGE_MASK, flags); - return fault; - -check_stack: - if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) - goto good_area; -out: - return fault; -} - -static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - struct task_struct *tsk; - struct mm_struct *mm; - int sig, code; - vm_fault_t fault; - unsigned int flags = FAULT_FLAG_DEFAULT; - - tsk = current; - mm = tsk->mm; - - /* - * If we're in an interrupt or have no user - * context, we must not take the fault.. - */ - if (faulthandler_disabled() || !mm) - goto no_context; - - if (user_mode(regs)) - flags |= FAULT_FLAG_USER; - if (!(fsr ^ 0x12)) - flags |= FAULT_FLAG_WRITE; - - /* - * As per x86, we may deadlock here. However, since the kernel only - * validly references user space from well defined areas of the code, - * we can bug out early if this is from code which shouldn't. - */ - if (!mmap_read_trylock(mm)) { - if (!user_mode(regs) - && !search_exception_tables(regs->UCreg_pc)) - goto no_context; -retry: - mmap_read_lock(mm); - } else { - /* - * The above down_read_trylock() might have succeeded in - * which case, we'll have missed the might_sleep() from - * down_read() - */ - might_sleep(); -#ifdef CONFIG_DEBUG_VM - if (!user_mode(regs) && - !search_exception_tables(regs->UCreg_pc)) - goto no_context; -#endif - } - - fault = __do_pf(mm, addr, fsr, flags, tsk); - - /* If we need to retry but a fatal signal is pending, handle the - * signal first. We do not need to release the mmap_lock because - * it would already be released in __lock_page_or_retry in - * mm/filemap.c. */ - if (fault_signal_pending(fault, regs)) - return 0; - - if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) { - if (fault & VM_FAULT_MAJOR) - tsk->maj_flt++; - else - tsk->min_flt++; - if (fault & VM_FAULT_RETRY) { - flags |= FAULT_FLAG_TRIED; - goto retry; - } - } - - mmap_read_unlock(mm); - - /* - * Handle the "normal" case first - VM_FAULT_MAJOR - */ - if (likely(!(fault & - (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) - return 0; - - /* - * If we are in kernel mode at this point, we - * have no context to handle this fault with. - */ - if (!user_mode(regs)) - goto no_context; - - if (fault & VM_FAULT_OOM) { - /* - * We ran out of memory, call the OOM killer, and return to - * userspace (which will retry the fault, or kill us if we - * got oom-killed) - */ - pagefault_out_of_memory(); - return 0; - } - - if (fault & VM_FAULT_SIGBUS) { - /* - * We had some memory, but were unable to - * successfully fix up this page fault. - */ - sig = SIGBUS; - code = BUS_ADRERR; - } else { - /* - * Something tried to access memory that - * isn't in our memory map.. - */ - sig = SIGSEGV; - code = fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR; - } - - __do_user_fault(addr, fsr, sig, code, regs); - return 0; - -no_context: - __do_kernel_fault(mm, addr, fsr, regs); - return 0; -} - -/* - * First Level Translation Fault Handler - * - * We enter here because the first level page table doesn't contain - * a valid entry for the address. - * - * If the address is in kernel space (>= TASK_SIZE), then we are - * probably faulting in the vmalloc() area. - * - * If the init_task's first level page tables contains the relevant - * entry, we copy the it to this task. If not, we send the process - * a signal, fixup the exception, or oops the kernel. - * - * NOTE! We MUST NOT take any locks for this case. We may be in an - * interrupt or a critical region, and should only copy the information - * from the master page table, nothing more. - */ -static int do_ifault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - unsigned int index; - pgd_t *pgd, *pgd_k; - pmd_t *pmd, *pmd_k; - - if (addr < TASK_SIZE) - return do_pf(addr, fsr, regs); - - if (user_mode(regs)) - goto bad_area; - - index = pgd_index(addr); - - pgd = cpu_get_pgd() + index; - pgd_k = init_mm.pgd + index; - - if (pgd_none(*pgd_k)) - goto bad_area; - - pmd_k = pmd_offset((pud_t *) pgd_k, addr); - pmd = pmd_offset((pud_t *) pgd, addr); - - if (pmd_none(*pmd_k)) - goto bad_area; - - set_pmd(pmd, *pmd_k); - flush_pmd_entry(pmd); - return 0; - -bad_area: - do_bad_area(addr, fsr, regs); - return 0; -} - -/* - * This abort handler always returns "fault". - */ -static int do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - return 1; -} - -static int do_good(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - unsigned int res1, res2; - - printk("dabt exception but no error!\n"); - - __asm__ __volatile__( - "mff %0,f0\n" - "mff %1,f1\n" - : "=r"(res1), "=r"(res2) - : - : "memory"); - - printk(KERN_EMERG "r0 :%08x r1 :%08x\n", res1, res2); - panic("shut up\n"); - return 0; -} - -static struct fsr_info { - int (*fn) (unsigned long addr, unsigned int fsr, struct pt_regs *regs); - int sig; - int code; - const char *name; -} fsr_info[] = { - /* - * The following are the standard Unicore-I and UniCore-II aborts. - */ - { do_good, SIGBUS, 0, "no error" }, - { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" }, - { do_bad, SIGBUS, BUS_OBJERR, "external exception" }, - { do_bad, SIGBUS, 0, "burst operation" }, - { do_bad, SIGBUS, 0, "unknown 00100" }, - { do_ifault, SIGSEGV, SEGV_MAPERR, "2nd level pt non-exist"}, - { do_bad, SIGBUS, 0, "2nd lvl large pt non-exist" }, - { do_bad, SIGBUS, 0, "invalid pte" }, - { do_pf, SIGSEGV, SEGV_MAPERR, "page miss" }, - { do_bad, SIGBUS, 0, "middle page miss" }, - { do_bad, SIGBUS, 0, "large page miss" }, - { do_pf, SIGSEGV, SEGV_MAPERR, "super page (section) miss" }, - { do_bad, SIGBUS, 0, "unknown 01100" }, - { do_bad, SIGBUS, 0, "unknown 01101" }, - { do_bad, SIGBUS, 0, "unknown 01110" }, - { do_bad, SIGBUS, 0, "unknown 01111" }, - { do_bad, SIGBUS, 0, "addr: up 3G or IO" }, - { do_pf, SIGSEGV, SEGV_ACCERR, "read unreadable addr" }, - { do_pf, SIGSEGV, SEGV_ACCERR, "write unwriteable addr"}, - { do_pf, SIGSEGV, SEGV_ACCERR, "exec unexecutable addr"}, - { do_bad, SIGBUS, 0, "unknown 10100" }, - { do_bad, SIGBUS, 0, "unknown 10101" }, - { do_bad, SIGBUS, 0, "unknown 10110" }, - { do_bad, SIGBUS, 0, "unknown 10111" }, - { do_bad, SIGBUS, 0, "unknown 11000" }, - { do_bad, SIGBUS, 0, "unknown 11001" }, - { do_bad, SIGBUS, 0, "unknown 11010" }, - { do_bad, SIGBUS, 0, "unknown 11011" }, - { do_bad, SIGBUS, 0, "unknown 11100" }, - { do_bad, SIGBUS, 0, "unknown 11101" }, - { do_bad, SIGBUS, 0, "unknown 11110" }, - { do_bad, SIGBUS, 0, "unknown 11111" } -}; - -void __init hook_fault_code(int nr, - int (*fn) (unsigned long, unsigned int, struct pt_regs *), - int sig, int code, const char *name) -{ - if (nr < 0 || nr >= ARRAY_SIZE(fsr_info)) - BUG(); - - fsr_info[nr].fn = fn; - fsr_info[nr].sig = sig; - fsr_info[nr].code = code; - fsr_info[nr].name = name; -} - -/* - * Dispatch a data abort to the relevant handler. - */ -asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - const struct fsr_info *inf = fsr_info + fsr_fs(fsr); - - if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs)) - return; - - printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", - inf->name, fsr, addr); - - uc32_notify_die("", regs, inf->sig, inf->code, (void __user *)addr, - fsr, 0); -} - -asmlinkage void do_PrefetchAbort(unsigned long addr, - unsigned int ifsr, struct pt_regs *regs) -{ - const struct fsr_info *inf = fsr_info + fsr_fs(ifsr); - - if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs)) - return; - - printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n", - inf->name, ifsr, addr); - - uc32_notify_die("", regs, inf->sig, inf->code, (void __user *)addr, - ifsr, 0); -} diff --git a/arch/unicore32/mm/flush.c b/arch/unicore32/mm/flush.c deleted file mode 100644 index 65954f8d89a2..000000000000 --- a/arch/unicore32/mm/flush.c +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/flush.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/pagemap.h> - -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> - -void flush_cache_mm(struct mm_struct *mm) -{ -} - -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) -{ - if (vma->vm_flags & VM_EXEC) - __flush_icache_all(); -} - -void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, - unsigned long pfn) -{ -} - -static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *kaddr, unsigned long len) -{ - /* VIPT non-aliasing D-cache */ - if (vma->vm_flags & VM_EXEC) { - unsigned long addr = (unsigned long)kaddr; - - __cpuc_coherent_kern_range(addr, addr + len); - } -} - -/* - * Copy user data from/to a page which is mapped into a different - * processes address space. Really, we want to allow our "user - * space" model to handle this. - * - * Note that this code needs to run on the current CPU. - */ -void copy_to_user_page(struct vm_area_struct *vma, struct page *page, - unsigned long uaddr, void *dst, const void *src, - unsigned long len) -{ - memcpy(dst, src, len); - flush_ptrace_access(vma, page, uaddr, dst, len); -} - -void __flush_dcache_page(struct address_space *mapping, struct page *page) -{ - /* - * Writeback any data associated with the kernel mapping of this - * page. This ensures that data in the physical page is mutually - * coherent with the kernels mapping. - */ - __cpuc_flush_kern_dcache_area(page_address(page), PAGE_SIZE); -} - -/* - * Ensure cache coherency between kernel mapping and userspace mapping - * of this page. - */ -void flush_dcache_page(struct page *page) -{ - struct address_space *mapping; - - /* - * The zero page is never written to, so never has any dirty - * cache lines, and therefore never needs to be flushed. - */ - if (page == ZERO_PAGE(0)) - return; - - mapping = page_mapping_file(page); - - if (mapping && !mapping_mapped(mapping)) - clear_bit(PG_dcache_clean, &page->flags); - else { - __flush_dcache_page(mapping, page); - if (mapping) - __flush_icache_all(); - set_bit(PG_dcache_clean, &page->flags); - } -} -EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c deleted file mode 100644 index 52425d383cea..000000000000 --- a/arch/unicore32/mm/init.c +++ /dev/null @@ -1,261 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/init.c - * - * Copyright (C) 2010 GUAN Xue-tao - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/swap.h> -#include <linux/init.h> -#include <linux/memblock.h> -#include <linux/mman.h> -#include <linux/nodemask.h> -#include <linux/initrd.h> -#include <linux/highmem.h> -#include <linux/gfp.h> -#include <linux/sort.h> -#include <linux/dma-mapping.h> -#include <linux/export.h> - -#include <asm/sections.h> -#include <asm/setup.h> -#include <linux/sizes.h> -#include <asm/tlb.h> -#include <asm/memblock.h> -#include <mach/map.h> - -#include "mm.h" - -/* - * This keeps memory configuration data used by a couple memory - * initialization functions, as well as show_mem() for the skipping - * of holes in the memory map. It is populated by uc32_add_memory(). - */ -struct meminfo meminfo; - -static void __init find_limits(unsigned long *min, unsigned long *max_low, - unsigned long *max_high) -{ - struct meminfo *mi = &meminfo; - int i; - - *min = -1UL; - *max_low = *max_high = 0; - - for_each_bank(i, mi) { - struct membank *bank = &mi->bank[i]; - unsigned long start, end; - - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (*min > start) - *min = start; - if (*max_high < end) - *max_high = end; - if (bank->highmem) - continue; - if (*max_low < end) - *max_low = end; - } -} - -static void __init uc32_bootmem_free(unsigned long max_low) -{ - unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 }; - - max_zone_pfn[ZONE_DMA] = max_low; - max_zone_pfn[ZONE_NORMAL] = max_low; - - /* - * Adjust the sizes according to any special requirements for - * this machine type. - * This might lower ZONE_DMA limit. - */ - arch_adjust_zones(max_zone_pfn); - - free_area_init(max_zone_pfn); -} - -int pfn_valid(unsigned long pfn) -{ - return memblock_is_memory(pfn << PAGE_SHIFT); -} -EXPORT_SYMBOL(pfn_valid); - -static void uc32_memory_present(void) -{ -} - -static int __init meminfo_cmp(const void *_a, const void *_b) -{ - const struct membank *a = _a, *b = _b; - long cmp = bank_pfn_start(a) - bank_pfn_start(b); - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; -} - -void __init uc32_memblock_init(struct meminfo *mi) -{ - int i; - - sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), - meminfo_cmp, NULL); - - for (i = 0; i < mi->nr_banks; i++) - memblock_add(mi->bank[i].start, mi->bank[i].size); - - /* Register the kernel text, kernel data and initrd with memblock. */ - memblock_reserve(__pa(_text), _end - _text); - -#ifdef CONFIG_BLK_DEV_INITRD - if (!phys_initrd_size) { - phys_initrd_start = 0x01000000; - phys_initrd_size = SZ_8M; - } - - if (phys_initrd_size) { - memblock_reserve(phys_initrd_start, phys_initrd_size); - - /* Now convert initrd to virtual addresses */ - initrd_start = __phys_to_virt(phys_initrd_start); - initrd_end = initrd_start + phys_initrd_size; - } -#endif - - uc32_mm_memblock_reserve(); - - memblock_allow_resize(); - memblock_dump_all(); -} - -void __init bootmem_init(void) -{ - unsigned long min, max_low, max_high; - - max_low = max_high = 0; - - find_limits(&min, &max_low, &max_high); - - node_set_online(0); - - /* - * Sparsemem tries to allocate bootmem in memory_present(), - * so must be done after the fixed reservations - */ - uc32_memory_present(); - - /* - * sparse_init() needs the bootmem allocator up and running. - */ - sparse_init(); - - /* - * Now free the memory - free_area_init needs - * the sparse mem_map arrays initialized by sparse_init() - * for memmap_init_zone(), otherwise all PFNs are invalid. - */ - uc32_bootmem_free(max_low); - - high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; - - /* - * This doesn't seem to be used by the Linux memory manager any - * more, but is used by ll_rw_block. If we can get rid of it, we - * also get rid of some of the stuff above as well. - * - * Note: max_low_pfn and max_pfn reflect the number of _pages_ in - * the system, not the maximum PFN. - */ - max_low_pfn = max_low - PHYS_PFN_OFFSET; - max_pfn = max_high - PHYS_PFN_OFFSET; -} - -static inline void -free_memmap(unsigned long start_pfn, unsigned long end_pfn) -{ - struct page *start_pg, *end_pg; - unsigned long pg, pgend; - - /* - * Convert start_pfn/end_pfn to a struct page pointer. - */ - start_pg = pfn_to_page(start_pfn - 1) + 1; - end_pg = pfn_to_page(end_pfn); - - /* - * Convert to physical addresses, and - * round start upwards and end downwards. - */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; - - /* - * If there are free pages between these, - * free the section of the memmap array. - */ - if (pg < pgend) - memblock_free(pg, pgend - pg); -} - -/* - * The mem_map array can get very big. Free the unused area of the memory map. - */ -static void __init free_unused_memmap(struct meminfo *mi) -{ - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; - - /* - * This relies on each bank being in address order. - * The banks are sorted previously in bootmem_init(). - */ - for_each_bank(i, mi) { - struct membank *bank = &mi->bank[i]; - - bank_start = bank_pfn_start(bank); - - /* - * If we had a previous bank, and there is a space - * between the current bank and the previous, free it. - */ - if (prev_bank_end && prev_bank_end < bank_start) - free_memmap(prev_bank_end, bank_start); - - /* - * Align up here since the VM subsystem insists that the - * memmap entries are valid from the bank end aligned to - * MAX_ORDER_NR_PAGES. - */ - prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); - } -} - -/* - * mem_init() marks the free areas in the mem_map and tells us how much - * memory is free. This is done after various parts of the system have - * claimed their memory after the kernel image. - */ -void __init mem_init(void) -{ - max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map; - - free_unused_memmap(&meminfo); - - /* this will put all unused low memory onto the freelists */ - memblock_free_all(); - - mem_init_print_info(NULL); - - BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR); - BUG_ON(TASK_SIZE > MODULES_VADDR); - - if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) { - /* - * On a machine this small we won't get - * anywhere without overcommit, so turn - * it on by default. - */ - sysctl_overcommit_memory = OVERCOMMIT_ALWAYS; - } -} diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c deleted file mode 100644 index 46a64bd6156a..000000000000 --- a/arch/unicore32/mm/ioremap.c +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/ioremap.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * Re-map IO memory to kernel address space so that we can access it. - * - * This allows a driver to remap an arbitrary region of bus memory into - * virtual space. One should *only* use readl, writel, memcpy_toio and - * so on with such remapped areas. - * - * Because UniCore only has a 32-bit address space we can't address the - * whole of the (physical) PCI space at once. PCI huge-mode addressing - * allows us to circumvent this restriction by splitting PCI space into - * two 2GB chunks and mapping only one at a time into processor memory. - * We use MMU protection domains to trap any attempt to access the bank - * that is not currently mapped. (This isn't fully implemented yet.) - */ -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/io.h> - -#include <asm/cputype.h> -#include <asm/cacheflush.h> -#include <asm/mmu_context.h> -#include <asm/pgalloc.h> -#include <asm/tlbflush.h> -#include <linux/sizes.h> - -#include <mach/map.h> -#include "mm.h" - -/* - * Used by ioremap() and iounmap() code to mark (super)section-mapped - * I/O regions in vm_struct->flags field. - */ -#define VM_UNICORE_SECTION_MAPPING 0x80000000 - -int ioremap_page(unsigned long virt, unsigned long phys, - const struct mem_type *mtype) -{ - return ioremap_page_range(virt, virt + PAGE_SIZE, phys, - __pgprot(mtype->prot_pte)); -} -EXPORT_SYMBOL(ioremap_page); - -/* - * Section support is unsafe on SMP - If you iounmap and ioremap a region, - * the other CPUs will not see this change until their next context switch. - * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs - * which requires the new ioremap'd region to be referenced, the CPU will - * reference the _old_ region. - * - * Note that get_vm_area_caller() allocates a guard 4K page, so we need to - * mask the size back to 4MB aligned or we will overflow in the loop below. - */ -static void unmap_area_sections(unsigned long virt, unsigned long size) -{ - unsigned long addr = virt, end = virt + (size & ~(SZ_4M - 1)); - pgd_t *pgd; - - flush_cache_vunmap(addr, end); - pgd = pgd_offset_k(addr); - do { - pmd_t pmd, *pmdp = pmd_offset((pud_t *)pgd, addr); - - pmd = *pmdp; - if (!pmd_none(pmd)) { - /* - * Clear the PMD from the page table, and - * increment the kvm sequence so others - * notice this change. - * - * Note: this is still racy on SMP machines. - */ - pmd_clear(pmdp); - - /* - * Free the page table, if there was one. - */ - if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE) - pte_free_kernel(&init_mm, pmd_page_vaddr(pmd)); - } - - addr += PGDIR_SIZE; - pgd++; - } while (addr < end); - - flush_tlb_kernel_range(virt, end); -} - -static int -remap_area_sections(unsigned long virt, unsigned long pfn, - size_t size, const struct mem_type *type) -{ - unsigned long addr = virt, end = virt + size; - pgd_t *pgd; - - /* - * Remove and free any PTE-based mapping, and - * sync the current kernel mapping. - */ - unmap_area_sections(virt, size); - - pgd = pgd_offset_k(addr); - do { - pmd_t *pmd = pmd_offset((pud_t *)pgd, addr); - - set_pmd(pmd, __pmd(__pfn_to_phys(pfn) | type->prot_sect)); - pfn += SZ_4M >> PAGE_SHIFT; - flush_pmd_entry(pmd); - - addr += PGDIR_SIZE; - pgd++; - } while (addr < end); - - return 0; -} - -void __iomem *__uc32_ioremap_pfn_caller(unsigned long pfn, - unsigned long offset, size_t size, unsigned int mtype, void *caller) -{ - const struct mem_type *type; - int err; - unsigned long addr; - struct vm_struct *area; - - /* - * High mappings must be section aligned - */ - if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SECTION_MASK)) - return NULL; - - /* - * Don't allow RAM to be mapped - */ - if (pfn_valid(pfn)) { - WARN(1, "BUG: Your driver calls ioremap() on\n" - "system memory. This leads to architecturally\n" - "unpredictable behaviour, and ioremap() will fail in\n" - "the next kernel release. Please fix your driver.\n"); - return NULL; - } - - type = get_mem_type(mtype); - if (!type) - return NULL; - - /* - * Page align the mapping size, taking account of any offset. - */ - size = PAGE_ALIGN(offset + size); - - area = get_vm_area_caller(size, VM_IOREMAP, caller); - if (!area) - return NULL; - addr = (unsigned long)area->addr; - - if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) { - area->flags |= VM_UNICORE_SECTION_MAPPING; - err = remap_area_sections(addr, pfn, size, type); - } else - err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn), - __pgprot(type->prot_pte)); - - if (err) { - vunmap((void *)addr); - return NULL; - } - - flush_cache_vmap(addr, addr + size); - return (void __iomem *) (offset + addr); -} - -void __iomem *__uc32_ioremap_caller(unsigned long phys_addr, size_t size, - unsigned int mtype, void *caller) -{ - unsigned long last_addr; - unsigned long offset = phys_addr & ~PAGE_MASK; - unsigned long pfn = __phys_to_pfn(phys_addr); - - /* - * Don't allow wraparound or zero size - */ - last_addr = phys_addr + size - 1; - if (!size || last_addr < phys_addr) - return NULL; - - return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype, caller); -} - -/* - * Remap an arbitrary physical address space into the kernel virtual - * address space. Needed when the kernel wants to access high addresses - * directly. - * - * NOTE! We need to allow non-page-aligned mappings too: we will obviously - * have to convert them into an offset in a page-aligned mapping, but the - * caller shouldn't need to know that small detail. - */ -void __iomem * -__uc32_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, - unsigned int mtype) -{ - return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(__uc32_ioremap_pfn); - -void __iomem * -__uc32_ioremap(unsigned long phys_addr, size_t size) -{ - return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE, - __builtin_return_address(0)); -} -EXPORT_SYMBOL(__uc32_ioremap); - -void __uc32_iounmap(volatile void __iomem *io_addr) -{ - void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); - struct vm_struct *vm; - - /* - * If this is a section based mapping we need to handle it - * specially as the VM subsystem does not know how to handle - * such a beast. We need the lock here b/c we need to clear - * all the mappings before the area can be reclaimed - * by someone else. - */ - vm = find_vm_area(addr); - if (vm && (vm->flags & VM_IOREMAP) && - (vm->flags & VM_UNICORE_SECTION_MAPPING)) - unmap_area_sections((unsigned long)vm->addr, vm->size); - - vunmap(addr); -} -EXPORT_SYMBOL(__uc32_iounmap); diff --git a/arch/unicore32/mm/mm.h b/arch/unicore32/mm/mm.h deleted file mode 100644 index f157f5d249ab..000000000000 --- a/arch/unicore32/mm/mm.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/mm/mm.h - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <asm/hwdef-copro.h> - -/* the upper-most page table pointer */ -extern pmd_t *top_pmd; -extern int sysctl_overcommit_memory; - -#define TOP_PTE(x) pte_offset_kernel(top_pmd, x) - -struct mem_type { - unsigned int prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; -}; - -const struct mem_type *get_mem_type(unsigned int type); - -extern void __flush_dcache_page(struct address_space *, struct page *); -extern void hook_fault_code(int nr, int (*fn) - (unsigned long, unsigned int, struct pt_regs *), - int sig, int code, const char *name); - -void __init bootmem_init(void); -void uc32_mm_memblock_reserve(void); diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c deleted file mode 100644 index 183d5b056814..000000000000 --- a/arch/unicore32/mm/mmu.c +++ /dev/null @@ -1,513 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/mmu.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/mman.h> -#include <linux/nodemask.h> -#include <linux/memblock.h> -#include <linux/fs.h> -#include <linux/io.h> - -#include <asm/cputype.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <linux/sizes.h> -#include <asm/tlb.h> -#include <asm/memblock.h> - -#include <mach/map.h> - -#include "mm.h" - -/* - * empty_zero_page is a special page that is used for - * zero-initialized data and COW. - */ -struct page *empty_zero_page; -EXPORT_SYMBOL(empty_zero_page); - -/* - * The pmd table for the upper-most set of pages. - */ -pmd_t *top_pmd; - -pgprot_t pgprot_user; -EXPORT_SYMBOL(pgprot_user); - -pgprot_t pgprot_kernel; -EXPORT_SYMBOL(pgprot_kernel); - -static int __init noalign_setup(char *__unused) -{ - cr_alignment &= ~CR_A; - cr_no_alignment &= ~CR_A; - set_cr(cr_alignment); - return 1; -} -__setup("noalign", noalign_setup); - -void adjust_cr(unsigned long mask, unsigned long set) -{ - unsigned long flags; - - mask &= ~CR_A; - - set &= mask; - - local_irq_save(flags); - - cr_no_alignment = (cr_no_alignment & ~mask) | set; - cr_alignment = (cr_alignment & ~mask) | set; - - set_cr((get_cr() & ~mask) | set); - - local_irq_restore(flags); -} - -struct map_desc { - unsigned long virtual; - unsigned long pfn; - unsigned long length; - unsigned int type; -}; - -#define PROT_PTE_DEVICE (PTE_PRESENT | PTE_YOUNG | \ - PTE_DIRTY | PTE_READ | PTE_WRITE) -#define PROT_SECT_DEVICE (PMD_TYPE_SECT | PMD_PRESENT | \ - PMD_SECT_READ | PMD_SECT_WRITE) - -static struct mem_type mem_types[] = { - [MT_DEVICE] = { /* Strongly ordered */ - .prot_pte = PROT_PTE_DEVICE, - .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT, - .prot_sect = PROT_SECT_DEVICE, - }, - /* - * MT_KUSER: pte for vecpage -- cacheable, - * and sect for unigfx mmap -- noncacheable - */ - [MT_KUSER] = { - .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY | - PTE_CACHEABLE | PTE_READ | PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT, - .prot_sect = PROT_SECT_DEVICE, - }, - [MT_HIGH_VECTORS] = { - .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY | - PTE_CACHEABLE | PTE_READ | PTE_WRITE | - PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT, - }, - [MT_MEMORY] = { - .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY | - PTE_WRITE | PTE_EXEC, - .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT, - .prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE | - PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC, - }, - [MT_ROM] = { - .prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE | - PMD_SECT_READ, - }, -}; - -const struct mem_type *get_mem_type(unsigned int type) -{ - return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL; -} -EXPORT_SYMBOL(get_mem_type); - -/* - * Adjust the PMD section entries according to the CPU in use. - */ -static void __init build_mem_type_table(void) -{ - pgprot_user = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE); - pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG | - PTE_DIRTY | PTE_READ | PTE_WRITE | - PTE_EXEC | PTE_CACHEABLE); -} - -#define vectors_base() (vectors_high() ? 0xffff0000 : 0) - -static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, - unsigned long prot) -{ - if (pmd_none(*pmd)) { - size_t size = PTRS_PER_PTE * sizeof(pte_t); - pte_t *pte = memblock_alloc(size, size); - - if (!pte) - panic("%s: Failed to allocate %zu bytes align=%zx\n", - __func__, size, size); - - __pmd_populate(pmd, __pa(pte) | prot); - } - BUG_ON(pmd_bad(*pmd)); - return pte_offset_kernel(pmd, addr); -} - -static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, - unsigned long end, unsigned long pfn, - const struct mem_type *type) -{ - pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1); - do { - set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte))); - pfn++; - } while (pte++, addr += PAGE_SIZE, addr != end); -} - -static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, - unsigned long end, unsigned long phys, - const struct mem_type *type) -{ - pmd_t *pmd = pmd_offset((pud_t *)pgd, addr); - - /* - * Try a section mapping - end, addr and phys must all be aligned - * to a section boundary. - */ - if (((addr | end | phys) & ~SECTION_MASK) == 0) { - pmd_t *p = pmd; - - do { - set_pmd(pmd, __pmd(phys | type->prot_sect)); - phys += SECTION_SIZE; - } while (pmd++, addr += SECTION_SIZE, addr != end); - - flush_pmd_entry(p); - } else { - /* - * No need to loop; pte's aren't interested in the - * individual L1 entries. - */ - alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type); - } -} - -/* - * Create the page directory entries and any necessary - * page tables for the mapping specified by `md'. We - * are able to cope here with varying sizes and address - * offsets, and we take full advantage of sections. - */ -static void __init create_mapping(struct map_desc *md) -{ - unsigned long phys, addr, length, end; - const struct mem_type *type; - pgd_t *pgd; - - if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08llx at 0x%08lx in user region\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - return; - } - - if ((md->type == MT_DEVICE || md->type == MT_ROM) && - md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " - "overlaps vmalloc space\n", - __pfn_to_phys((u64)md->pfn), md->virtual); - } - - type = &mem_types[md->type]; - - addr = md->virtual & PAGE_MASK; - phys = (unsigned long)__pfn_to_phys(md->pfn); - length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); - - if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) { - printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " - "be mapped using pages, ignoring.\n", - __pfn_to_phys(md->pfn), addr); - return; - } - - pgd = pgd_offset_k(addr); - end = addr + length; - do { - unsigned long next = pgd_addr_end(addr, end); - - alloc_init_section(pgd, addr, next, phys, type); - - phys += next - addr; - addr = next; - } while (pgd++, addr != end); -} - -static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M); - -/* - * vmalloc=size forces the vmalloc area to be exactly 'size' - * bytes. This can be used to increase (or decrease) the vmalloc - * area - the default is 128m. - */ -static int __init early_vmalloc(char *arg) -{ - unsigned long vmalloc_reserve = memparse(arg, NULL); - - if (vmalloc_reserve < SZ_16M) { - vmalloc_reserve = SZ_16M; - printk(KERN_WARNING - "vmalloc area too small, limiting to %luMB\n", - vmalloc_reserve >> 20); - } - - if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) { - vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M); - printk(KERN_WARNING - "vmalloc area is too big, limiting to %luMB\n", - vmalloc_reserve >> 20); - } - - vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve); - return 0; -} -early_param("vmalloc", early_vmalloc); - -static phys_addr_t lowmem_limit __initdata = SZ_1G; - -static void __init sanity_check_meminfo(void) -{ - int i, j; - - lowmem_limit = __pa(vmalloc_min - 1) + 1; - memblock_set_current_limit(lowmem_limit); - - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { - struct membank *bank = &meminfo.bank[j]; - *bank = meminfo.bank[i]; - j++; - } - meminfo.nr_banks = j; -} - -static inline void prepare_page_table(void) -{ - unsigned long addr; - phys_addr_t end; - - /* - * Clear out all the mappings below the kernel image. - */ - for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Find the end of the first block of lowmem. - */ - end = memblock.memory.regions[0].base + memblock.memory.regions[0].size; - if (end >= lowmem_limit) - end = lowmem_limit; - - /* - * Clear out all the kernel space mappings, except for the first - * memory bank, up to the end of the vmalloc region. - */ - for (addr = __phys_to_virt(end); - addr < VMALLOC_END; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); -} - -/* - * Reserve the special regions of memory - */ -void __init uc32_mm_memblock_reserve(void) -{ - /* - * Reserve the page tables. These are already in use, - * and can only be in node 0. - */ - memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); -} - -/* - * Set up device the mappings. Since we clear out the page tables for all - * mappings above VMALLOC_END, we will remove any debug device mappings. - * This means you have to be careful how you debug this function, or any - * called function. This means you can't use any function or debugging - * method which may touch any device, otherwise the kernel _will_ crash. - */ -static void __init devicemaps_init(void) -{ - struct map_desc map; - unsigned long addr; - void *vectors; - - /* - * Allocate the vector page early. - */ - vectors = memblock_alloc(PAGE_SIZE, PAGE_SIZE); - if (!vectors) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, PAGE_SIZE, PAGE_SIZE); - - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) - pmd_clear(pmd_off_k(addr)); - - /* - * Create a mapping for the machine vectors at the high-vectors - * location (0xffff0000). If we aren't using high-vectors, also - * create a mapping at the low-vectors virtual address. - */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors)); - map.virtual = VECTORS_BASE; - map.length = PAGE_SIZE; - map.type = MT_HIGH_VECTORS; - create_mapping(&map); - - /* - * Create a mapping for the kuser page at the special - * location (0xbfff0000) to the same vectors location. - */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors)); - map.virtual = KUSER_VECPAGE_BASE; - map.length = PAGE_SIZE; - map.type = MT_KUSER; - create_mapping(&map); - - /* - * Finally flush the caches and tlb to ensure that we're in a - * consistent state wrt the writebuffer. This also ensures that - * any write-allocated cache lines in the vector page are written - * back. After this point, we can start to touch devices again. - */ - local_flush_tlb_all(); - flush_cache_all(); -} - -static void __init map_lowmem(void) -{ - struct memblock_region *reg; - - /* Map all the lowmem memory banks. */ - for_each_memblock(memory, reg) { - phys_addr_t start = reg->base; - phys_addr_t end = start + reg->size; - struct map_desc map; - - if (end > lowmem_limit) - end = lowmem_limit; - if (start >= end) - break; - - map.pfn = __phys_to_pfn(start); - map.virtual = __phys_to_virt(start); - map.length = end - start; - map.type = MT_MEMORY; - - create_mapping(&map); - } -} - -/* - * paging_init() sets up the page tables, initialises the zone memory - * maps, and sets up the zero page, bad page and bad page tables. - */ -void __init paging_init(void) -{ - void *zero_page; - - build_mem_type_table(); - sanity_check_meminfo(); - prepare_page_table(); - map_lowmem(); - devicemaps_init(); - - top_pmd = pmd_off_k(0xffff0000); - - /* allocate the zero page. */ - zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE); - if (!zero_page) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, PAGE_SIZE, PAGE_SIZE); - - bootmem_init(); - - empty_zero_page = virt_to_page(zero_page); - __flush_dcache_page(NULL, empty_zero_page); -} - -/* - * In order to soft-boot, we need to insert a 1:1 mapping in place of - * the user-mode pages. This will then ensure that we have predictable - * results when turning the mmu off - */ -void setup_mm_for_reboot(void) -{ - unsigned long base_pmdval; - pgd_t *pgd; - int i; - - /* - * We need to access to user-mode page tables here. For kernel threads - * we don't have any user-mode mappings so we use the context that we - * "borrowed". - */ - pgd = current->active_mm->pgd; - - base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT; - - for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { - unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval; - pmd_t *pmd; - - pmd = pmd_off(pgd, i << PGDIR_SHIFT); - set_pmd(pmd, __pmd(pmdval)); - flush_pmd_entry(pmd); - } - - local_flush_tlb_all(); -} - -/* - * Take care of architecture specific things when placing a new PTE into - * a page table, or changing an existing PTE. Basically, there are two - * things that we need to take care of: - * - * 1. If PG_dcache_clean is not set for the page, we need to ensure - * that any cache entries for the kernels virtual memory - * range are written back to the page. - * 2. If we have multiple shared mappings of the same space in - * an object, we need to deal with the cache aliasing issues. - * - * Note that the pte lock will be held. - */ -void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep) -{ - unsigned long pfn = pte_pfn(*ptep); - struct address_space *mapping; - struct page *page; - - if (!pfn_valid(pfn)) - return; - - /* - * The zero page is never written to, so never has any dirty - * cache lines, and therefore never needs to be flushed. - */ - page = pfn_to_page(pfn); - if (page == ZERO_PAGE(0)) - return; - - mapping = page_mapping_file(page); - if (!test_and_set_bit(PG_dcache_clean, &page->flags)) - __flush_dcache_page(mapping, page); - if (mapping) - if (vma->vm_flags & VM_EXEC) - __flush_icache_all(); -} diff --git a/arch/unicore32/mm/pgd.c b/arch/unicore32/mm/pgd.c deleted file mode 100644 index f01c73e04836..000000000000 --- a/arch/unicore32/mm/pgd.c +++ /dev/null @@ -1,102 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/pgd.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/mm.h> -#include <linux/gfp.h> -#include <linux/highmem.h> - -#include <asm/pgalloc.h> -#include <asm/page.h> -#include <asm/tlbflush.h> - -#include "mm.h" - -#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD) - -/* - * need to get a 4k page for level 1 - */ -pgd_t *get_pgd_slow(struct mm_struct *mm) -{ - pgd_t *new_pgd, *init_pgd; - pmd_t *new_pmd, *init_pmd; - pte_t *new_pte, *init_pte; - - new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 0); - if (!new_pgd) - goto no_pgd; - - memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); - - /* - * Copy over the kernel and IO PGD entries - */ - init_pgd = pgd_offset_k(0); - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - - if (!vectors_high()) { - /* - * On UniCore, first page must always be allocated since it - * contains the machine vectors. - */ - new_pmd = pmd_alloc(mm, (pud_t *)new_pgd, 0); - if (!new_pmd) - goto no_pmd; - - new_pte = pte_alloc_map(mm, new_pmd, 0); - if (!new_pte) - goto no_pte; - - init_pmd = pmd_offset((pud_t *)init_pgd, 0); - init_pte = pte_offset_map(init_pmd, 0); - set_pte(new_pte, *init_pte); - pte_unmap(init_pte); - pte_unmap(new_pte); - } - - return new_pgd; - -no_pte: - pmd_free(mm, new_pmd); - mm_dec_nr_pmds(mm); -no_pmd: - free_pages((unsigned long)new_pgd, 0); -no_pgd: - return NULL; -} - -void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd) -{ - pmd_t *pmd; - pgtable_t pte; - - if (!pgd) - return; - - /* pgd is always present and good */ - pmd = pmd_off(pgd, 0); - if (pmd_none(*pmd)) - goto free; - if (pmd_bad(*pmd)) { - pmd_ERROR(*pmd); - pmd_clear(pmd); - goto free; - } - - pte = pmd_pgtable(*pmd); - pmd_clear(pmd); - pte_free(mm, pte); - mm_dec_nr_ptes(mm); - pmd_free(mm, pmd); - mm_dec_nr_pmds(mm); -free: - free_pages((unsigned long) pgd, 0); -} diff --git a/arch/unicore32/mm/proc-macros.S b/arch/unicore32/mm/proc-macros.S deleted file mode 100644 index 3b0ae7d5bd80..000000000000 --- a/arch/unicore32/mm/proc-macros.S +++ /dev/null @@ -1,142 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/mm/proc-macros.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - * - * We need constants.h for: - * VMA_VM_MM - * VMA_VM_FLAGS - * VM_EXEC - */ -#include <generated/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/memory.h> - -/* - * the cache line sizes of the I and D cache are the same - */ -#define CACHE_LINESIZE 32 - -/* - * This is the maximum size of an area which will be invalidated - * using the single invalidate entry instructions. Anything larger - * than this, and we go for the whole cache. - * - * This value should be chosen such that we choose the cheapest - * alternative. - */ -#ifdef CONFIG_CPU_UCV2 -#define MAX_AREA_SIZE 0x800 /* 64 cache line */ -#endif - -/* - * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm) - */ - .macro vma_vm_mm, rd, rn - ldw \rd, [\rn+], #VMA_VM_MM - .endm - -/* - * vma_vm_flags - get vma->vm_flags - */ - .macro vma_vm_flags, rd, rn - ldw \rd, [\rn+], #VMA_VM_FLAGS - .endm - - .macro tsk_mm, rd, rn - ldw \rd, [\rn+], #TI_TASK - ldw \rd, [\rd+], #TSK_ACTIVE_MM - .endm - -/* - * act_mm - get current->active_mm - */ - .macro act_mm, rd - andn \rd, sp, #8128 - andn \rd, \rd, #63 - ldw \rd, [\rd+], #TI_TASK - ldw \rd, [\rd+], #TSK_ACTIVE_MM - .endm - -/* - * mmid - get context id from mm pointer (mm->context.id) - */ - .macro mmid, rd, rn - ldw \rd, [\rn+], #MM_CONTEXT_ID - .endm - -/* - * mask_asid - mask the ASID from the context ID - */ - .macro asid, rd, rn - and \rd, \rn, #255 - .endm - - .macro crval, clear, mmuset, ucset - .word \clear - .word \mmuset - .endm - -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE -/* - * va2pa va, pa, tbl, msk, off, err - * This macro is used to translate virtual address to its physical address. - * - * va: virtual address - * pa: physical address, result is stored in this register - * tbl, msk, off: temp registers, will be destroyed - * err: jump to error label if the physical address not exist - * NOTE: all regs must be different - */ - .macro va2pa, va, pa, tbl, msk, off, err=990f - movc \pa, p0.c2, #0 - mov \off, \va >> #22 @ off <- index of 1st page table - adr \tbl, 910f @ tbl <- table of 1st page table -900: @ ---- handle 1, 2 page table - add \pa, \pa, #PAGE_OFFSET @ pa <- virt addr of page table - ldw \pa, [\pa+], \off << #2 @ pa <- the content of pt - cand.a \pa, #4 @ test exist bit - beq \err @ if not exist - and \off, \pa, #3 @ off <- the last 2 bits - add \tbl, \tbl, \off << #3 @ cmove table pointer - ldw \msk, [\tbl+], #0 @ get the mask - ldw pc, [\tbl+], #4 -930: @ ---- handle 2nd page table - and \pa, \pa, \msk @ pa <- phys addr of 2nd pt - mov \off, \va << #10 - cntlo \tbl, \msk @ use tbl as temp reg - mov \off, \off >> \tbl - mov \off, \off >> #2 @ off <- index of 2nd pt - adr \tbl, 920f @ tbl <- table of 2nd pt - b 900b -910: @ 1st level page table - .word 0xfffff000, 930b @ second level page table - .word 0xfffffc00, 930b @ second level large page table - .word 0x00000000, \err @ invalid - .word 0xffc00000, 980f @ super page - -920: @ 2nd level page table - .word 0xfffff000, 980f @ page - .word 0xffffc000, 980f @ middle page - .word 0xffff0000, 980f @ large page - .word 0x00000000, \err @ invalid -980: - andn \tbl, \va, \msk - and \pa, \pa, \msk - or \pa, \pa, \tbl -990: - .endm -#endif - - .macro dcacheline_flush, addr, t1, t2 - mov \t1, \addr << #20 - ldw \t2, =_stext @ _stext must ALIGN(4096) - add \t2, \t2, \t1 >> #20 - ldw \t1, [\t2+], #0x0000 - ldw \t1, [\t2+], #0x1000 - ldw \t1, [\t2+], #0x2000 - ldw \t1, [\t2+], #0x3000 - .endm diff --git a/arch/unicore32/mm/proc-syms.c b/arch/unicore32/mm/proc-syms.c deleted file mode 100644 index 6c081616fc3c..000000000000 --- a/arch/unicore32/mm/proc-syms.c +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/unicore32/mm/proc-syms.c - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/module.h> -#include <linux/mm.h> - -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <asm/page.h> - -EXPORT_SYMBOL(cpu_dcache_clean_area); -EXPORT_SYMBOL(cpu_set_pte); - -EXPORT_SYMBOL(__cpuc_coherent_kern_range); diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S deleted file mode 100644 index 18f8c4fb21a0..000000000000 --- a/arch/unicore32/mm/proc-ucv2.S +++ /dev/null @@ -1,131 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/mm/proc-ucv2.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/init.h> -#include <linux/linkage.h> -#include <linux/pgtable.h> -#include <asm/assembler.h> -#include <asm/hwcap.h> -#include <asm/pgtable-hwdef.h> - -#include "proc-macros.S" - -ENTRY(cpu_proc_fin) - stm.w (lr), [sp-] - mov ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE - mov.a asr, ip - b.l __cpuc_flush_kern_all - ldm.w (pc), [sp]+ - -/* - * cpu_reset(loc) - * - * Perform a soft reset of the system. Put the CPU into the - * same state as it would be if it had been reset, and branch - * to what would be the reset vector. - * - * - loc - location to jump to for soft reset - */ - .align 5 -ENTRY(cpu_reset) - mov ip, #0 - movc p0.c5, ip, #28 @ Cache invalidate all - nop8 - - movc p0.c6, ip, #6 @ TLB invalidate all - nop8 - - movc ip, p0.c1, #0 @ ctrl register - or ip, ip, #0x2000 @ vector base address - andn ip, ip, #0x000f @ ............idam - movc p0.c1, ip, #0 @ disable caches and mmu - nop - mov pc, r0 @ jump to loc - nop8 - -/* - * cpu_do_idle() - * - * Idle the processor (eg, wait for interrupt). - * - * IRQs are already disabled. - */ -ENTRY(cpu_do_idle) - mov r0, #0 @ PCI address - .rept 8 - ldw r1, [r0] - .endr - mov pc, lr - -ENTRY(cpu_dcache_clean_area) -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - csub.a r1, #MAX_AREA_SIZE - bsg 101f - mov r9, #PAGE_SZ - sub r9, r9, #1 @ PAGE_MASK -1: va2pa r0, r10, r11, r12, r13 @ r10 is PA - b 3f -2: cand.a r0, r9 - beq 1b -3: movc p0.c5, r10, #11 @ clean D entry - nop8 - add r0, r0, #CACHE_LINESIZE - add r10, r10, #CACHE_LINESIZE - sub.a r1, r1, #CACHE_LINESIZE - bua 2b - mov pc, lr -#endif -101: mov ip, #0 - movc p0.c5, ip, #10 @ Dcache clean all - nop8 - - mov pc, lr - -/* - * cpu_do_switch_mm(pgd_phys) - * - * Set the translation table base pointer to be pgd_phys - * - * - pgd_phys - physical address of new pgd - * - * It is assumed that: - * - we are not using split page tables - */ - .align 5 -ENTRY(cpu_do_switch_mm) - movc p0.c2, r0, #0 @ update page table ptr - nop8 - - movc p0.c6, ip, #6 @ TLB invalidate all - nop8 - - mov pc, lr - -/* - * cpu_set_pte(ptep, pte) - * - * Set a level 2 translation table entry. - * - * - ptep - pointer to level 2 translation table entry - * - pte - PTE value to store - */ - .align 5 -ENTRY(cpu_set_pte) - stw r1, [r0] -#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE - sub r2, r0, #PAGE_OFFSET - movc p0.c5, r2, #11 @ Dcache clean line - nop8 -#else - mov ip, #0 - movc p0.c5, ip, #10 @ Dcache clean all - nop8 - @dcacheline_flush r0, r2, ip -#endif - mov pc, lr - diff --git a/arch/unicore32/mm/tlb-ucv2.S b/arch/unicore32/mm/tlb-ucv2.S deleted file mode 100644 index 0ce9c6b6f1db..000000000000 --- a/arch/unicore32/mm/tlb-ucv2.S +++ /dev/null @@ -1,86 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/unicore32/mm/tlb-ucv2.S - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Copyright (C) 2001-2010 GUAN Xue-tao - */ -#include <linux/init.h> -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/page.h> -#include <asm/tlbflush.h> -#include "proc-macros.S" - -/* - * __cpu_flush_user_tlb_range(start, end, vma) - * - * Invalidate a range of TLB entries in the specified address space. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - vma - vma_struct describing address range - */ -ENTRY(__cpu_flush_user_tlb_range) -#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE - mov r0, r0 >> #PAGE_SHIFT @ align address - mov r0, r0 << #PAGE_SHIFT - vma_vm_flags r2, r2 @ get vma->vm_flags -1: - movc p0.c6, r0, #3 - nop8 - - cand.a r2, #VM_EXEC @ Executable area ? - beq 2f - - movc p0.c6, r0, #5 - nop8 -2: - add r0, r0, #PAGE_SZ - csub.a r0, r1 - beb 1b -#else - movc p0.c6, r0, #2 - nop8 - - cand.a r2, #VM_EXEC @ Executable area ? - beq 2f - - movc p0.c6, r0, #4 - nop8 -2: -#endif - mov pc, lr - -/* - * __cpu_flush_kern_tlb_range(start,end) - * - * Invalidate a range of kernel TLB entries - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - */ -ENTRY(__cpu_flush_kern_tlb_range) -#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE - mov r0, r0 >> #PAGE_SHIFT @ align address - mov r0, r0 << #PAGE_SHIFT -1: - movc p0.c6, r0, #3 - nop8 - - movc p0.c6, r0, #5 - nop8 - - add r0, r0, #PAGE_SZ - csub.a r0, r1 - beb 1b -#else - movc p0.c6, r0, #2 - nop8 - - movc p0.c6, r0, #4 - nop8 -#endif - mov pc, lr - |