diff options
Diffstat (limited to 'drivers/ata/Kconfig')
| -rw-r--r-- | drivers/ata/Kconfig | 49 |
1 files changed, 35 insertions, 14 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e08d322d01d7..80dc988f01e4 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -14,7 +14,7 @@ menuconfig ATA tristate "Serial ATA and Parallel ATA drivers" depends on HAS_IOMEM depends on BLOCK - depends on !(M32R || M68K) || BROKEN + depends on !(M32R || M68K || S390) || BROKEN select SCSI ---help--- If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or @@ -58,6 +58,20 @@ config ATA_ACPI You can disable this at kernel boot time by using the option libata.noacpi=1 +config SATA_ZPODD + bool "SATA Zero Power Optical Disc Drive (ZPODD) support" + depends on ATA_ACPI + default n + help + This option adds support for SATA Zero Power Optical Disc + Drive (ZPODD). It requires both the ODD and the platform + support, and if enabled, will automatically power on/off the + ODD when certain condition is satisfied. This does not impact + end user's experience of the ODD, only power is saved when + the ODD is not in use (i.e. no disc inside). + + If unsure, say N. + config SATA_PMP bool "SATA Port Multiplier support" default y @@ -146,7 +160,7 @@ config PDC_ADMA config PATA_OCTEON_CF tristate "OCTEON Boot Bus Compact Flash support" - depends on CPU_CAVIUM_OCTEON + depends on CAVIUM_OCTEON_SOC help This option enables a polled compact flash driver for use with compact flash cards attached to the OCTEON boot bus. @@ -163,7 +177,7 @@ config SATA_QSTOR config SATA_SX4 tristate "Promise SATA SX4 support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for Promise Serial ATA SX4. @@ -247,6 +261,13 @@ config SATA_PROMISE If unsure, say N. +config SATA_RCAR + tristate "Renesas R-Car SATA support" + help + This option enables support for Renesas R-Car Serial ATA. + + If unsure, say N. + config SATA_SIL tristate "Silicon Image SATA support" depends on PCI @@ -390,7 +411,7 @@ config PATA_CS5530 config PATA_CS5535 tristate "CS5535 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + depends on PCI && X86 && !X86_64 help This option enables support for the NatSemi/AMD CS5535 companion chip used with the Geode processor family. @@ -408,7 +429,7 @@ config PATA_CS5536 config PATA_CYPRESS tristate "Cypress CY82C693 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the Cypress/Contaq CY82C693 chipset found in some Alpha systems @@ -496,7 +517,7 @@ config PATA_IMX config PATA_IT8213 tristate "IT8213 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the ITE 821 PATA controllers via the new ATA layer. @@ -589,7 +610,7 @@ config PATA_OLDPIIX config PATA_OPTIDMA tristate "OPTI FireStar PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables DMA/PIO support for the later OPTi controllers found on some old motherboards and in some @@ -616,7 +637,7 @@ config PATA_PDC_OLD config PATA_RADISYS tristate "RADISYS 82600 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the RADISYS 82600 PATA controllers via the new ATA layer @@ -687,7 +708,7 @@ config PATA_SIS config PATA_TOSHIBA tristate "Toshiba Piccolo support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help Support for the Toshiba Piccolo controllers. Currently only the primary channel is supported by this driver. @@ -738,7 +759,7 @@ comment "PIO-only SFF controllers" config PATA_AT32 tristate "Atmel AVR32 PATA support (Experimental)" - depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL + depends on AVR32 && PLATFORM_AT32AP help This option enables support for the IDE devices on the Atmel AT32AP platform. @@ -755,7 +776,7 @@ config PATA_AT91 config PATA_CMD640_PCI tristate "CMD640 PCI PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the CMD640 PCI IDE interface chip. Only the primary channel is currently @@ -801,7 +822,7 @@ config PATA_NS87410 config PATA_OPTI tristate "OPTI621/6215 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables full PIO support for the early Opti ATA controllers found on some old motherboards. @@ -881,7 +902,7 @@ config PATA_SAMSUNG_CF config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" - depends on ISA && EXPERIMENTAL + depends on ISA select PATA_LEGACY help Support for the Winbond W83759A controller on Vesa Local Bus @@ -909,7 +930,7 @@ config ATA_GENERIC config PATA_LEGACY tristate "Legacy ISA PATA support (Experimental)" - depends on (ISA || PCI) && EXPERIMENTAL + depends on (ISA || PCI) help This option enables support for ISA/VLB/PCI bus legacy PATA ports and allows them to be accessed via the new ATA layer. |