diff options
Diffstat (limited to 'drivers/ata/pata_mpiix.c')
| -rw-r--r-- | drivers/ata/pata_mpiix.c | 71 |
1 files changed, 13 insertions, 58 deletions
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index c0d9e0cf208c..7d7e3fdab71f 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -55,21 +55,7 @@ static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline) if (!pci_test_config_bits(pdev, &mpiix_enable_bits)) return -ENOENT; - return ata_std_prereset(link, deadline); -} - -/** - * mpiix_error_handler - probe reset - * @ap: ATA port - * - * Perform the ATA probe and bus reset sequence plus specific handling - * for this hardware. The MPIIX has the enable bits in a different place - * to PIIX4 and friends. As a pure PIO device it has no cable detect - */ - -static void mpiix_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ata_sff_prereset(link, deadline); } /** @@ -83,8 +69,8 @@ static void mpiix_error_handler(struct ata_port *ap) * * This would get very ugly because we can only program timing for one * device at a time, the other gets PIO0. Fortunately libata calls - * our qc_issue_prot command before a command is issued so we can - * flip the timings back and forth to reduce the pain. + * our qc_issue command before a command is issued so we can flip the + * timings back and forth to reduce the pain. */ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -124,7 +110,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) } /** - * mpiix_qc_issue_prot - command issue + * mpiix_qc_issue - command issue * @qc: command pending * * Called when the libata layer is about to issue a command. We wrap @@ -134,7 +120,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev) * be made PIO0. */ -static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; @@ -147,50 +133,19 @@ static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc) if (adev->pio_mode && adev != ap->private_data) mpiix_set_piomode(ap, adev); - return ata_qc_issue_prot(qc); + return ata_sff_qc_issue(qc); } static struct scsi_host_template mpiix_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_PIO_SHT(DRV_NAME), }; static struct ata_port_operations mpiix_port_ops = { - .set_piomode = mpiix_set_piomode, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = mpiix_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, + .inherits = &ata_sff_port_ops, + .qc_issue = mpiix_qc_issue, .cable_detect = ata_cable_40wire, - - .qc_prep = ata_qc_prep, - .qc_issue = mpiix_qc_issue_prot, - .data_xfer = ata_data_xfer, - - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, + .set_piomode = mpiix_set_piomode, + .prereset = mpiix_pre_reset, }; static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) @@ -252,10 +207,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.altstatus_addr = ctl_addr; /* Let libata fill in the port details */ - ata_std_ports(&ap->ioaddr); + ata_sff_std_ports(&ap->ioaddr); /* activate host */ - return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED, + return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED, &mpiix_sht); } |