diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 7 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 50 | ||||
-rw-r--r-- | drivers/ata/ahci.h | 2 | ||||
-rw-r--r-- | drivers/ata/ahci_imx.c | 179 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 7 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 36 | ||||
-rw-r--r-- | drivers/ata/pata_arasan_cf.c | 7 | ||||
-rw-r--r-- | drivers/ata/pata_at91.c | 11 | ||||
-rw-r--r-- | drivers/ata/pata_samsung_cf.c | 10 |
9 files changed, 264 insertions, 45 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 20e03a7eb8b4..0033fafc470b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -116,7 +116,7 @@ config AHCI_ST config AHCI_IMX tristate "Freescale i.MX AHCI SATA support" - depends on MFD_SYSCON + depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) help This option enables support for the Freescale i.MX SoC's onboard AHCI SATA. @@ -134,8 +134,7 @@ config AHCI_SUNXI config AHCI_XGENE tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" - depends on ARM64 || COMPILE_TEST - select PHY_XGENE + depends on PHY_XGENE help This option enables support for APM X-Gene SoC SATA host controller. @@ -816,7 +815,7 @@ config PATA_AT32 config PATA_AT91 tristate "PATA support for AT91SAM9260" - depends on ARM && ARCH_AT91 + depends on ARM && SOC_AT91SAM9 help This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5a0bf8ed649b..60707814a84b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1115,6 +1115,17 @@ static bool ahci_broken_online(struct pci_dev *pdev) return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff); } +static bool ahci_broken_devslp(struct pci_dev *pdev) +{ + /* device with broken DEVSLP but still showing SDS capability */ + static const struct pci_device_id ids[] = { + { PCI_VDEVICE(INTEL, 0x0f23)}, /* Valleyview SoC */ + {} + }; + + return pci_match_id(ids, pdev); +} + #ifdef CONFIG_ATA_ACPI static void ahci_gtf_filter_workaround(struct ata_host *host) { @@ -1164,9 +1175,9 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) #endif static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, - struct ahci_host_priv *hpriv) + struct ahci_host_priv *hpriv) { - int nvec; + int rc, nvec; if (hpriv->flags & AHCI_HFLAG_NO_MSI) goto intx; @@ -1183,12 +1194,19 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, if (nvec < n_ports) goto single_msi; - nvec = pci_enable_msi_range(pdev, nvec, nvec); - if (nvec == -ENOSPC) + rc = pci_enable_msi_exact(pdev, nvec); + if (rc == -ENOSPC) goto single_msi; - else if (nvec < 0) + else if (rc < 0) goto intx; + /* fallback to single MSI mode if the controller enforced MRSM mode */ + if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) { + pci_disable_msi(pdev); + printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n"); + goto single_msi; + } + return nvec; single_msi: @@ -1232,18 +1250,18 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis) return rc; for (i = 0; i < host->n_ports; i++) { - const char* desc; struct ahci_port_priv *pp = host->ports[i]->private_data; - /* pp is NULL for dummy ports */ - if (pp) - desc = pp->irq_desc; - else - desc = dev_driver_string(host->dev); + /* Do not receive interrupts sent by dummy ports */ + if (!pp) { + disable_irq(irq + i); + continue; + } - rc = devm_request_threaded_irq(host->dev, - irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED, - desc, host->ports[i]); + rc = devm_request_threaded_irq(host->dev, irq + i, + ahci_hw_interrupt, + ahci_thread_fn, IRQF_SHARED, + pp->irq_desc, host->ports[i]); if (rc) goto out_free_irqs; } @@ -1357,6 +1375,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar]; + /* must set flag prior to save config in order to take effect */ + if (ahci_broken_devslp(pdev)) + hpriv->flags |= AHCI_HFLAG_NO_DEVSLP; + /* save initial config */ ahci_pci_save_initial_config(pdev, hpriv); diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 51af275b3388..af63c75c2001 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -94,6 +94,7 @@ enum { /* HOST_CTL bits */ HOST_RESET = (1 << 0), /* reset controller; self-clear */ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ @@ -235,6 +236,7 @@ enum { port start (wait until error-handling stage) */ AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ + AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ /* ap->flags bits */ diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index 497c7abe1c7d..8befeb69eeb1 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -29,9 +29,25 @@ #include "ahci.h" enum { - PORT_PHY_CTL = 0x178, /* Port0 PHY Control */ - PORT_PHY_CTL_PDDQ_LOC = 0x100000, /* PORT_PHY_CTL bits */ - HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ + /* Timer 1-ms Register */ + IMX_TIMER1MS = 0x00e0, + /* Port0 PHY Control Register */ + IMX_P0PHYCR = 0x0178, + IMX_P0PHYCR_TEST_PDDQ = 1 << 20, + IMX_P0PHYCR_CR_READ = 1 << 19, + IMX_P0PHYCR_CR_WRITE = 1 << 18, + IMX_P0PHYCR_CR_CAP_DATA = 1 << 17, + IMX_P0PHYCR_CR_CAP_ADDR = 1 << 16, + /* Port0 PHY Status Register */ + IMX_P0PHYSR = 0x017c, + IMX_P0PHYSR_CR_ACK = 1 << 18, + IMX_P0PHYSR_CR_DATA_OUT = 0xffff << 0, + /* Lane0 Output Status Register */ + IMX_LANE0_OUT_STAT = 0x2003, + IMX_LANE0_OUT_STAT_RX_PLL_STATE = 1 << 1, + /* Clock Reset Register */ + IMX_CLOCK_RESET = 0x7f3f, + IMX_CLOCK_RESET_RESET = 1 << 0, }; enum ahci_imx_type { @@ -54,9 +70,149 @@ MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support static void ahci_imx_host_stop(struct ata_host *host); +static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert) +{ + int timeout = 10; + u32 crval; + u32 srval; + + /* Assert or deassert the bit */ + crval = readl(mmio + IMX_P0PHYCR); + if (assert) + crval |= bit; + else + crval &= ~bit; + writel(crval, mmio + IMX_P0PHYCR); + + /* Wait for the cr_ack signal */ + do { + srval = readl(mmio + IMX_P0PHYSR); + if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK) + break; + usleep_range(100, 200); + } while (--timeout); + + return timeout ? 0 : -ETIMEDOUT; +} + +static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio) +{ + u32 crval = addr; + int ret; + + /* Supply the address on cr_data_in */ + writel(crval, mmio + IMX_P0PHYCR); + + /* Assert the cr_cap_addr signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true); + if (ret) + return ret; + + /* Deassert cr_cap_addr */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false); + if (ret) + return ret; + + return 0; +} + +static int imx_phy_reg_write(u16 val, void __iomem *mmio) +{ + u32 crval = val; + int ret; + + /* Supply the data on cr_data_in */ + writel(crval, mmio + IMX_P0PHYCR); + + /* Assert the cr_cap_data signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true); + if (ret) + return ret; + + /* Deassert cr_cap_data */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false); + if (ret) + return ret; + + if (val & IMX_CLOCK_RESET_RESET) { + /* + * In case we're resetting the phy, it's unable to acknowledge, + * so we return immediately here. + */ + crval |= IMX_P0PHYCR_CR_WRITE; + writel(crval, mmio + IMX_P0PHYCR); + goto out; + } + + /* Assert the cr_write signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true); + if (ret) + return ret; + + /* Deassert cr_write */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false); + if (ret) + return ret; + +out: + return 0; +} + +static int imx_phy_reg_read(u16 *val, void __iomem *mmio) +{ + int ret; + + /* Assert the cr_read signal */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true); + if (ret) + return ret; + + /* Capture the data from cr_data_out[] */ + *val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT; + + /* Deassert cr_read */ + ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false); + if (ret) + return ret; + + return 0; +} + +static int imx_sata_phy_reset(struct ahci_host_priv *hpriv) +{ + void __iomem *mmio = hpriv->mmio; + int timeout = 10; + u16 val; + int ret; + + /* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */ + ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio); + if (ret) + return ret; + ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio); + if (ret) + return ret; + + /* Wait for PHY RX_PLL to be stable */ + do { + usleep_range(100, 200); + ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio); + if (ret) + return ret; + ret = imx_phy_reg_read(&val, mmio); + if (ret) + return ret; + if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE) + break; + } while (--timeout); + + return timeout ? 0 : -ETIMEDOUT; +} + static int imx_sata_enable(struct ahci_host_priv *hpriv) { struct imx_ahci_priv *imxpriv = hpriv->plat_data; + struct device *dev = &imxpriv->ahci_pdev->dev; int ret; if (imxpriv->no_device) @@ -101,6 +257,14 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv) regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, IMX6Q_GPR13_SATA_MPLL_CLK_EN, IMX6Q_GPR13_SATA_MPLL_CLK_EN); + + usleep_range(100, 200); + + ret = imx_sata_phy_reset(hpriv); + if (ret) { + dev_err(dev, "failed to reset phy: %d\n", ret); + goto disable_regulator; + } } usleep_range(1000, 2000); @@ -156,8 +320,8 @@ static void ahci_imx_error_handler(struct ata_port *ap) * without full reset once the pddq mode is enabled making it * impossible to use as part of libata LPM. */ - reg_val = readl(mmio + PORT_PHY_CTL); - writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL); + reg_val = readl(mmio + IMX_P0PHYCR); + writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR); imx_sata_disable(hpriv); imxpriv->no_device = true; } @@ -217,6 +381,7 @@ static int imx_ahci_probe(struct platform_device *pdev) if (!imxpriv) return -ENOMEM; + imxpriv->ahci_pdev = pdev; imxpriv->no_device = false; imxpriv->first_time = true; imxpriv->type = (enum ahci_imx_type)of_id->data; @@ -248,7 +413,7 @@ static int imx_ahci_probe(struct platform_device *pdev) /* * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, - * and IP vendor specific register HOST_TIMER1MS. + * and IP vendor specific register IMX_TIMER1MS. * Configure CAP_SSS (support stagered spin up). * Implement the port0. * Get the ahb clock rate, and configure the TIMER1MS register. @@ -265,7 +430,7 @@ static int imx_ahci_probe(struct platform_device *pdev) } reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; - writel(reg_val, hpriv->mmio + HOST_TIMER1MS); + writel(reg_val, hpriv->mmio + IMX_TIMER1MS); ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0); if (ret) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 6bd4f660b4e1..b9861453fc81 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -452,6 +452,13 @@ void ahci_save_initial_config(struct device *dev, cap &= ~HOST_CAP_SNTF; } + if ((cap2 & HOST_CAP2_SDS) && (hpriv->flags & AHCI_HFLAG_NO_DEVSLP)) { + dev_info(dev, + "controller can't do DEVSLP, turning off\n"); + cap2 &= ~HOST_CAP2_SDS; + cap2 &= ~HOST_CAP2_SADM; + } + if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) { dev_info(dev, "controller can do FBS, turning on CAP_FBS\n"); cap |= HOST_CAP_FBS; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c19734d96d7e..ea83828bfea9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4224,8 +4224,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, /* devices that don't properly handle queued TRIM commands */ - { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, - { "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Micron_M500*", "MU0[1-4]*", ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M500SSD*", "MU0[1-4]*", ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, /* * Some WD SATA-I drives spin up and down erratically when the link @@ -4792,21 +4794,26 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) { struct ata_queued_cmd *qc = NULL; - unsigned int i; + unsigned int i, tag; /* no command while frozen */ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); + for (i = 0; i < ATA_MAX_QUEUE; i++) { + tag = (i + ap->last_tag + 1) % ATA_MAX_QUEUE; + + /* the last tag is reserved for internal command. */ + if (tag == ATA_TAG_INTERNAL) + continue; + + if (!test_and_set_bit(tag, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, tag); + qc->tag = tag; + ap->last_tag = tag; break; } - - if (qc) - qc->tag = i; + } return qc; } @@ -6307,6 +6314,8 @@ int ata_host_activate(struct ata_host *host, int irq, static void ata_port_detach(struct ata_port *ap) { unsigned long flags; + struct ata_link *link; + struct ata_device *dev; if (!ap->ops->error_handler) goto skip_eh; @@ -6326,6 +6335,13 @@ static void ata_port_detach(struct ata_port *ap) cancel_delayed_work_sync(&ap->hotplug_task); skip_eh: + /* clean up zpodd on port removal */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); + } + } if (ap->pmp_link) { int i; for (i = 0; i < SATA_PMP_MAX_PORTS; i++) diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 6fac524c2f50..4edb1a81f63f 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -898,9 +898,12 @@ static int arasan_cf_probe(struct platform_device *pdev) cf_card_detect(acdev, 0); - return ata_host_activate(host, acdev->irq, irq_handler, 0, - &arasan_cf_sht); + ret = ata_host_activate(host, acdev->irq, irq_handler, 0, + &arasan_cf_sht); + if (!ret) + return 0; + cf_exit(acdev); free_clk: clk_put(acdev->clk); return ret; diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index e9c87274a781..8a66f23af4c4 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -407,12 +407,13 @@ static int pata_at91_probe(struct platform_device *pdev) host->private_data = info; - return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0, - gpio_is_valid(irq) ? ata_sff_interrupt : NULL, - irq_flags, &pata_at91_sht); + ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0, + gpio_is_valid(irq) ? ata_sff_interrupt : NULL, + irq_flags, &pata_at91_sht); + if (ret) + goto err_put; - if (!ret) - return 0; + return 0; err_put: clk_put(info->mck); diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index a79566d05666..0610e78c8a2a 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -594,9 +594,13 @@ static int __init pata_s3c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); - return ata_host_activate(host, info->irq, - info->irq ? pata_s3c_irq : NULL, - 0, &pata_s3c_sht); + ret = ata_host_activate(host, info->irq, + info->irq ? pata_s3c_irq : NULL, + 0, &pata_s3c_sht); + if (ret) + goto stop_clk; + + return 0; stop_clk: clk_disable(info->clk); |