aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/drbd/drbd_int.h48
-rw-r--r--drivers/block/drbd/drbd_proc.c103
2 files changed, 75 insertions, 76 deletions
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index e306a22a60f1..abf5aefd9790 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -1982,54 +1982,6 @@ static inline int _get_ldev_if_state(struct drbd_device *device, enum drbd_disk_
extern int _get_ldev_if_state(struct drbd_device *device, enum drbd_disk_state mins);
#endif
-/* you must have an "get_ldev" reference */
-static inline void drbd_get_syncer_progress(struct drbd_device *device,
- unsigned long *bits_left, unsigned int *per_mil_done)
-{
- /* this is to break it at compile time when we change that, in case we
- * want to support more than (1<<32) bits on a 32bit arch. */
- typecheck(unsigned long, device->rs_total);
-
- /* note: both rs_total and rs_left are in bits, i.e. in
- * units of BM_BLOCK_SIZE.
- * for the percentage, we don't care. */
-
- if (device->state.conn == C_VERIFY_S || device->state.conn == C_VERIFY_T)
- *bits_left = device->ov_left;
- else
- *bits_left = drbd_bm_total_weight(device) - device->rs_failed;
- /* >> 10 to prevent overflow,
- * +1 to prevent division by zero */
- if (*bits_left > device->rs_total) {
- /* doh. maybe a logic bug somewhere.
- * may also be just a race condition
- * between this and a disconnect during sync.
- * for now, just prevent in-kernel buffer overflow.
- */
- smp_rmb();
- drbd_warn(device, "cs:%s rs_left=%lu > rs_total=%lu (rs_failed %lu)\n",
- drbd_conn_str(device->state.conn),
- *bits_left, device->rs_total, device->rs_failed);
- *per_mil_done = 0;
- } else {
- /* Make sure the division happens in long context.
- * We allow up to one petabyte storage right now,
- * at a granularity of 4k per bit that is 2**38 bits.
- * After shift right and multiplication by 1000,
- * this should still fit easily into a 32bit long,
- * so we don't need a 64bit division on 32bit arch.
- * Note: currently we don't support such large bitmaps on 32bit
- * arch anyways, but no harm done to be prepared for it here.
- */
- unsigned int shift = device->rs_total > UINT_MAX ? 16 : 10;
- unsigned long left = *bits_left >> shift;
- unsigned long total = 1UL + (device->rs_total >> shift);
- unsigned long tmp = 1000UL - left * 1000UL/total;
- *per_mil_done = tmp;
- }
-}
-
-
/* this throttles on-the-fly application requests
* according to max_buffers settings;
* maybe re-implement using semaphores? */
diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
index 886f6bef70dc..9059d7bf8a36 100644
--- a/drivers/block/drbd/drbd_proc.c
+++ b/drivers/block/drbd/drbd_proc.c
@@ -60,20 +60,65 @@ static void seq_printf_with_thousands_grouping(struct seq_file *seq, long v)
seq_printf(seq, "%ld", v);
}
+static void drbd_get_syncer_progress(struct drbd_device *device,
+ union drbd_dev_state state, unsigned long *rs_total,
+ unsigned long *bits_left, unsigned int *per_mil_done)
+{
+ /* this is to break it at compile time when we change that, in case we
+ * want to support more than (1<<32) bits on a 32bit arch. */
+ typecheck(unsigned long, device->rs_total);
+ *rs_total = device->rs_total;
+
+ /* note: both rs_total and rs_left are in bits, i.e. in
+ * units of BM_BLOCK_SIZE.
+ * for the percentage, we don't care. */
+
+ if (state.conn == C_VERIFY_S || state.conn == C_VERIFY_T)
+ *bits_left = device->ov_left;
+ else
+ *bits_left = drbd_bm_total_weight(device) - device->rs_failed;
+ /* >> 10 to prevent overflow,
+ * +1 to prevent division by zero */
+ if (*bits_left > *rs_total) {
+ /* D'oh. Maybe a logic bug somewhere. More likely just a race
+ * between state change and reset of rs_total.
+ */
+ *bits_left = *rs_total;
+ *per_mil_done = *rs_total ? 0 : 1000;
+ } else {
+ /* Make sure the division happens in long context.
+ * We allow up to one petabyte storage right now,
+ * at a granularity of 4k per bit that is 2**38 bits.
+ * After shift right and multiplication by 1000,
+ * this should still fit easily into a 32bit long,
+ * so we don't need a 64bit division on 32bit arch.
+ * Note: currently we don't support such large bitmaps on 32bit
+ * arch anyways, but no harm done to be prepared for it here.
+ */
+ unsigned int shift = *rs_total > UINT_MAX ? 16 : 10;
+ unsigned long left = *bits_left >> shift;
+ unsigned long total = 1UL + (*rs_total >> shift);
+ unsigned long tmp = 1000UL - left * 1000UL/total;
+ *per_mil_done = tmp;
+ }
+}
+
+
/*lge
* progress bars shamelessly adapted from driver/md/md.c
* output looks like
* [=====>..............] 33.5% (23456/123456)
* finish: 2:20:20 speed: 6,345 (6,456) K/sec
*/
-static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *seq)
+static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *seq,
+ union drbd_dev_state state)
{
- unsigned long db, dt, dbdt, rt, rs_left;
+ unsigned long db, dt, dbdt, rt, rs_total, rs_left;
unsigned int res;
int i, x, y;
int stalled = 0;
- drbd_get_syncer_progress(device, &rs_left, &res);
+ drbd_get_syncer_progress(device, state, &rs_total, &rs_left, &res);
x = res/50;
y = 20-x;
@@ -85,21 +130,21 @@ static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *se
seq_printf(seq, ".");
seq_printf(seq, "] ");
- if (device->state.conn == C_VERIFY_S || device->state.conn == C_VERIFY_T)
+ if (state.conn == C_VERIFY_S || state.conn == C_VERIFY_T)
seq_printf(seq, "verified:");
else
seq_printf(seq, "sync'ed:");
seq_printf(seq, "%3u.%u%% ", res / 10, res % 10);
/* if more than a few GB, display in MB */
- if (device->rs_total > (4UL << (30 - BM_BLOCK_SHIFT)))
+ if (rs_total > (4UL << (30 - BM_BLOCK_SHIFT)))
seq_printf(seq, "(%lu/%lu)M",
(unsigned long) Bit2KB(rs_left >> 10),
- (unsigned long) Bit2KB(device->rs_total >> 10));
+ (unsigned long) Bit2KB(rs_total >> 10));
else
seq_printf(seq, "(%lu/%lu)K\n\t",
(unsigned long) Bit2KB(rs_left),
- (unsigned long) Bit2KB(device->rs_total));
+ (unsigned long) Bit2KB(rs_total));
/* see drivers/md/md.c
* We do not want to overflow, so the order of operands and
@@ -150,13 +195,13 @@ static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *se
dt = (jiffies - device->rs_start - device->rs_paused) / HZ;
if (dt == 0)
dt = 1;
- db = device->rs_total - rs_left;
+ db = rs_total - rs_left;
dbdt = Bit2KB(db/dt);
seq_printf_with_thousands_grouping(seq, dbdt);
seq_printf(seq, ")");
- if (device->state.conn == C_SYNC_TARGET ||
- device->state.conn == C_VERIFY_S) {
+ if (state.conn == C_SYNC_TARGET ||
+ state.conn == C_VERIFY_S) {
seq_printf(seq, " want: ");
seq_printf_with_thousands_grouping(seq, device->c_sync_rate);
}
@@ -168,8 +213,8 @@ static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *se
unsigned long bm_bits = drbd_bm_bits(device);
unsigned long bit_pos;
unsigned long long stop_sector = 0;
- if (device->state.conn == C_VERIFY_S ||
- device->state.conn == C_VERIFY_T) {
+ if (state.conn == C_VERIFY_S ||
+ state.conn == C_VERIFY_T) {
bit_pos = bm_bits - device->ov_left;
if (verify_can_do_stop_sector(device))
stop_sector = device->ov_stop_sector;
@@ -194,6 +239,7 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
const char *sn;
struct drbd_device *device;
struct net_conf *nc;
+ union drbd_dev_state state;
char wp;
static char write_ordering_chars[] = {
@@ -231,11 +277,12 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
seq_printf(seq, "\n");
prev_i = i;
- sn = drbd_conn_str(device->state.conn);
+ state = device->state;
+ sn = drbd_conn_str(state.conn);
- if (device->state.conn == C_STANDALONE &&
- device->state.disk == D_DISKLESS &&
- device->state.role == R_SECONDARY) {
+ if (state.conn == C_STANDALONE &&
+ state.disk == D_DISKLESS &&
+ state.role == R_SECONDARY) {
seq_printf(seq, "%2d: cs:Unconfigured\n", i);
} else {
/* reset device->congestion_reason */
@@ -248,15 +295,15 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
" ns:%u nr:%u dw:%u dr:%u al:%u bm:%u "
"lo:%d pe:%d ua:%d ap:%d ep:%d wo:%c",
i, sn,
- drbd_role_str(device->state.role),
- drbd_role_str(device->state.peer),
- drbd_disk_str(device->state.disk),
- drbd_disk_str(device->state.pdsk),
+ drbd_role_str(state.role),
+ drbd_role_str(state.peer),
+ drbd_disk_str(state.disk),
+ drbd_disk_str(state.pdsk),
wp,
drbd_suspended(device) ? 's' : 'r',
- device->state.aftr_isp ? 'a' : '-',
- device->state.peer_isp ? 'p' : '-',
- device->state.user_isp ? 'u' : '-',
+ state.aftr_isp ? 'a' : '-',
+ state.peer_isp ? 'p' : '-',
+ state.user_isp ? 'u' : '-',
device->congestion_reason ?: '-',
test_bit(AL_SUSPENDED, &device->flags) ? 's' : '-',
device->send_cnt/2,
@@ -277,11 +324,11 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
Bit2KB((unsigned long long)
drbd_bm_total_weight(device)));
}
- if (device->state.conn == C_SYNC_SOURCE ||
- device->state.conn == C_SYNC_TARGET ||
- device->state.conn == C_VERIFY_S ||
- device->state.conn == C_VERIFY_T)
- drbd_syncer_progress(device, seq);
+ if (state.conn == C_SYNC_SOURCE ||
+ state.conn == C_SYNC_TARGET ||
+ state.conn == C_VERIFY_S ||
+ state.conn == C_VERIFY_T)
+ drbd_syncer_progress(device, seq, state);
if (proc_details >= 1 && get_ldev_if_state(device, D_FAILED)) {
lc_seq_printf_stats(seq, device->resync);