diff options
Diffstat (limited to 'drivers/char/ip2')
| -rw-r--r-- | drivers/char/ip2/Makefile | 8 | ||||
| -rw-r--r-- | drivers/char/ip2/ip2base.c | 109 | ||||
| -rw-r--r-- | drivers/char/ip2/ip2main.c | 3211 |
3 files changed, 3328 insertions, 0 deletions
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile new file mode 100644 index 000000000000..6bfe2543ddc2 --- /dev/null +++ b/drivers/char/ip2/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Computone IntelliPort Plus Driver +# + +obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o + +ip2-objs := ip2base.o + diff --git a/drivers/char/ip2/ip2base.c b/drivers/char/ip2/ip2base.c new file mode 100644 index 000000000000..435ccfc74958 --- /dev/null +++ b/drivers/char/ip2/ip2base.c @@ -0,0 +1,109 @@ +// ip2.c +// This is a dummy module to make the firmware available when needed +// and allows it to be unloaded when not. Rumor is the __initdata +// macro doesn't always works on all platforms so we use this kludge. +// If not compiled as a module it just makes fip_firm avaliable then +// __initdata should work as advertized +// + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/wait.h> + +#ifndef __init +#define __init +#endif +#ifndef __initfunc +#define __initfunc(a) a +#endif +#ifndef __initdata +#define __initdata +#endif + +#include "ip2types.h" +#include "fip_firm.h" // the meat + +int +ip2_loadmain(int *, int *, unsigned char *, int ); // ref into ip2main.c + +/* Note: Add compiled in defaults to these arrays, not to the structure + in ip2.h any longer. That structure WILL get overridden + by these values, or command line values, or insmod values!!! =mhw= +*/ +static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 }; +static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; + +static int poll_only = 0; + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards"); +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards"); +module_param(poll_only, bool, 0); +MODULE_PARM_DESC(poll_only,"Do not use card interrupts"); + + +static int __init ip2_init(void) +{ + if( poll_only ) { + /* Hard lock the interrupts to zero */ + irq[0] = irq[1] = irq[2] = irq[3] = 0; + } + + return ip2_loadmain(io,irq,(unsigned char *)fip_firm,sizeof(fip_firm)); +} +module_init(ip2_init); + +MODULE_LICENSE("GPL"); + +#ifndef MODULE +/****************************************************************************** + * ip2_setup: + * str: kernel command line string + * + * Can't autoprobe the boards so user must specify configuration on + * kernel command line. Sane people build it modular but the others + * come here. + * + * Alternating pairs of io,irq for up to 4 boards. + * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + * + * io=0 => No board + * io=1 => PCI + * io=2 => EISA + * else => ISA I/O address + * + * irq=0 or invalid for ISA will revert to polling mode + * + * Any value = -1, do not overwrite compiled in value. + * + ******************************************************************************/ +static int __init ip2_setup(char *str) +{ + int ints[10]; /* 4 boards, 2 parameters + 2 */ + int i, j; + + str = get_options (str, ARRAY_SIZE(ints), ints); + + for( i = 0, j = 1; i < 4; i++ ) { + if( j > ints[0] ) { + break; + } + if( ints[j] >= 0 ) { + io[i] = ints[j]; + } + j++; + if( j > ints[0] ) { + break; + } + if( ints[j] >= 0 ) { + irq[i] = ints[j]; + } + j++; + } + return 1; +} +__setup("ip2=", ip2_setup); +#endif /* !MODULE */ diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c new file mode 100644 index 000000000000..03db1cb3fa95 --- /dev/null +++ b/drivers/char/ip2/ip2main.c @@ -0,0 +1,3211 @@ +/* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Mainline code for the device driver +* +*******************************************************************************/ +// ToDo: +// +// Fix the immediate DSS_NOW problem. +// Work over the channel stats return logic in ip2_ipl_ioctl so they +// make sense for all 256 possible channels and so the user space +// utilities will compile and work properly. +// +// Done: +// +// 1.2.14 /\/\|=mhw=|\/\/ +// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. +// Changed the definition of ip2trace to be more consistent with kernel style +// Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates +// +// 1.2.13 /\/\|=mhw=|\/\/ +// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform +// to agreed devfs serial device naming convention. +// +// 1.2.12 /\/\|=mhw=|\/\/ +// Cleaned up some remove queue cut and paste errors +// +// 1.2.11 /\/\|=mhw=|\/\/ +// Clean up potential NULL pointer dereferences +// Clean up devfs registration +// Add kernel command line parsing for io and irq +// Compile defaults for io and irq are now set in ip2.c not ip2.h! +// Reworked poll_only hack for explicit parameter setting +// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 +// Merged ip2_loadmain and old_ip2_init +// Converted all instances of interruptible_sleep_on into queue calls +// Most of these had no race conditions but better to clean up now +// +// 1.2.10 /\/\|=mhw=|\/\/ +// Fixed the bottom half interrupt handler and enabled USE_IQI +// to split the interrupt handler into a formal top-half / bottom-half +// Fixed timing window on high speed processors that queued messages to +// the outbound mail fifo faster than the board could handle. +// +// 1.2.9 +// Four box EX was barfing on >128k kmalloc, made structure smaller by +// reducing output buffer size +// +// 1.2.8 +// Device file system support (MHW) +// +// 1.2.7 +// Fixed +// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules +// +// 1.2.6 +//Fixes DCD problems +// DCD was not reported when CLOCAL was set on call to TIOCMGET +// +//Enhancements: +// TIOCMGET requests and waits for status return +// No DSS interrupts enabled except for DCD when needed +// +// For internal use only +// +//#define IP2DEBUG_INIT +//#define IP2DEBUG_OPEN +//#define IP2DEBUG_WRITE +//#define IP2DEBUG_READ +//#define IP2DEBUG_IOCTL +//#define IP2DEBUG_IPL + +//#define IP2DEBUG_TRACE +//#define DEBUG_FIFO + +/************/ +/* Includes */ +/************/ +#include <linux/config.h> + +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/devfs_fs_kernel.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/major.h> +#include <linux/wait.h> +#include <linux/device.h> + +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/termios.h> +#include <linux/tty_driver.h> +#include <linux/serial.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> + +#include <linux/cdk.h> +#include <linux/comstats.h> +#include <linux/delay.h> +#include <linux/bitops.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <linux/vmalloc.h> +#include <linux/init.h> + +#include <asm/uaccess.h> + +#include "ip2types.h" +#include "ip2trace.h" +#include "ip2ioctl.h" +#include "ip2.h" +#include "i2ellis.h" +#include "i2lib.h" + +/***************** + * /proc/ip2mem * + *****************/ + +#include <linux/proc_fs.h> + +static int ip2_read_procmem(char *, char **, off_t, int); +static int ip2_read_proc(char *, char **, off_t, int, int *, void * ); + +/********************/ +/* Type Definitions */ +/********************/ + +/*************/ +/* Constants */ +/*************/ + +/* String constants to identify ourselves */ +static char *pcName = "Computone IntelliPort Plus multiport driver"; +static char *pcVersion = "1.2.14"; + +/* String constants for port names */ +static char *pcDriver_name = "ip2"; +static char *pcIpl = "ip2ipl"; + +/* Serial subtype definitions */ +#define SERIAL_TYPE_NORMAL 1 + +// cheezy kludge or genius - you decide? +int ip2_loadmain(int *, int *, unsigned char *, int); +static unsigned char *Fip_firmware; +static int Fip_firmware_size; + +/***********************/ +/* Function Prototypes */ +/***********************/ + +/* Global module entry functions */ + +/* Private (static) functions */ +static int ip2_open(PTTY, struct file *); +static void ip2_close(PTTY, struct file *); +static int ip2_write(PTTY, const unsigned char *, int); +static void ip2_putchar(PTTY, unsigned char); +static void ip2_flush_chars(PTTY); +static int ip2_write_room(PTTY); +static int ip2_chars_in_buf(PTTY); +static void ip2_flush_buffer(PTTY); +static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); +static void ip2_set_termios(PTTY, struct termios *); +static void ip2_set_line_discipline(PTTY); +static void ip2_throttle(PTTY); +static void ip2_unthrottle(PTTY); +static void ip2_stop(PTTY); +static void ip2_start(PTTY); +static void ip2_hangup(PTTY); +static int ip2_tiocmget(struct tty_struct *tty, struct file *file); +static int ip2_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); + +static void set_irq(int, int); +static void ip2_interrupt_bh(i2eBordStrPtr pB); +static irqreturn_t ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs); +static void ip2_poll(unsigned long arg); +static inline void service_all_boards(void); +static void do_input(void *p); +static void do_status(void *p); + +static void ip2_wait_until_sent(PTTY,int); + +static void set_params (i2ChanStrPtr, struct termios *); +static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); +static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); + +static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); +static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); +static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG); +static int ip2_ipl_open(struct inode *, struct file *); + +static int DumpTraceBuffer(char __user *, int); +static int DumpFifoBuffer( char __user *, int); + +static void ip2_init_board(int); +static unsigned short find_eisa_board(int); + +/***************/ +/* Static Data */ +/***************/ + +static struct tty_driver *ip2_tty_driver; + +/* Here, then is a table of board pointers which the interrupt routine should + * scan through to determine who it must service. + */ +static unsigned short i2nBoards; // Number of boards here + +static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; + +static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; +//DevTableMem just used to save addresses for kfree +static void *DevTableMem[IP2_MAX_BOARDS]; + +/* This is the driver descriptor for the ip2ipl device, which is used to + * download the loadware to the boards. + */ +static struct file_operations ip2_ipl = { + .owner = THIS_MODULE, + .read = ip2_ipl_read, + .write = ip2_ipl_write, + .ioctl = ip2_ipl_ioctl, + .open = ip2_ipl_open, +}; + +static unsigned long irq_counter = 0; +static unsigned long bh_counter = 0; + +// Use immediate queue to service interrupts +#define USE_IQI +//#define USE_IQ // PCI&2.2 needs work + +/* The timer_list entry for our poll routine. If interrupt operation is not + * selected, the board is serviced periodically to see if anything needs doing. + */ +#define POLL_TIMEOUT (jiffies + 1) +static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); +static char TimerOn; + +#ifdef IP2DEBUG_TRACE +/* Trace (debug) buffer data */ +#define TRACEMAX 1000 +static unsigned long tracebuf[TRACEMAX]; +static int tracestuff; +static int tracestrip; +static int tracewrap; +#endif + +/**********/ +/* Macros */ +/**********/ + +#if defined(MODULE) && defined(IP2DEBUG_OPEN) +#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \ + tty->name,(pCh->flags),ip2_tty_driver->refcount, \ + tty->count,/*GET_USE_COUNT(module)*/0,s) +#else +#define DBG_CNT(s) +#endif + +/********/ +/* Code */ +/********/ + +#include "i2ellis.c" /* Extremely low-level interface services */ +#include "i2cmd.c" /* Standard loadware command definitions */ +#include "i2lib.c" /* High level interface services */ + +/* Configuration area for modprobe */ + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); + +static int poll_only = 0; + +static int Eisa_irq; +static int Eisa_slot; + +static int iindx; +static char rirqs[IP2_MAX_BOARDS]; +static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; + +/* for sysfs class support */ +static struct class *ip2_class; + +// Some functions to keep track of what irq's we have + +static int __init +is_valid_irq(int irq) +{ + int *i = Valid_Irqs; + + while ((*i != 0) && (*i != irq)) { + i++; + } + return (*i); +} + +static void __init +mark_requested_irq( char irq ) +{ + rirqs[iindx++] = irq; +} + +#ifdef MODULE +static int __init +clear_requested_irq( char irq ) +{ + int i; + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if (rirqs[i] == irq) { + rirqs[i] = 0; + return 1; + } + } + return 0; +} +#endif + +static int __init +have_requested_irq( char irq ) +{ + // array init to zeros so 0 irq will not be requested as a side effect + int i; + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if (rirqs[i] == irq) + return 1; + } + return 0; +} + +/******************************************************************************/ +/* Function: init_module() */ +/* Parameters: None */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This is a required entry point for an installable module. It simply calls */ +/* the driver initialisation function and returns what it returns. */ +/******************************************************************************/ +#ifdef MODULE +int +init_module(void) +{ +#ifdef IP2DEBUG_INIT + printk (KERN_DEBUG "Loading module ...\n" ); +#endif + return 0; +} +#endif /* MODULE */ + +/******************************************************************************/ +/* Function: cleanup_module() */ +/* Parameters: None */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This is a required entry point for an installable module. It has to return */ +/* the device and the driver to a passive state. It should not be necessary */ +/* to reset the board fully, especially as the loadware is downloaded */ +/* externally rather than in the driver. We just want to disable the board */ +/* and clear the loadware to a reset state. To allow this there has to be a */ +/* way to detect whether the board has the loadware running at init time to */ +/* handle subsequent installations of the driver. All memory allocated by the */ +/* driver should be returned since it may be unloaded from memory. */ +/******************************************************************************/ +#ifdef MODULE +void +cleanup_module(void) +{ + int err; + int i; + +#ifdef IP2DEBUG_INIT + printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion ); +#endif + /* Stop poll timer if we had one. */ + if ( TimerOn ) { + del_timer ( &PollTimer ); + TimerOn = 0; + } + + /* Reset the boards we have. */ + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] ) { + iiReset( i2BoardPtrTable[i] ); + } + } + + /* The following is done at most once, if any boards were installed. */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] ) { + iiResetDelay( i2BoardPtrTable[i] ); + /* free io addresses and Tibet */ + release_region( ip2config.addr[i], 8 ); + class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); + devfs_remove("ip2/ipl%d", i); + class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); + devfs_remove("ip2/stat%d", i); + } + /* Disable and remove interrupt handler. */ + if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) { + free_irq ( ip2config.irq[i], (void *)&pcName); + clear_requested_irq( ip2config.irq[i]); + } + } + class_destroy(ip2_class); + devfs_remove("ip2"); + if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) { + printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err); + } + put_tty_driver(ip2_tty_driver); + if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) { + printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n", err); + } + remove_proc_entry("ip2mem", &proc_root); + + // free memory + for (i = 0; i < IP2_MAX_BOARDS; i++) { + void *pB; +#ifdef CONFIG_PCI + if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { + pci_disable_device(ip2config.pci_dev[i]); + ip2config.pci_dev[i] = NULL; + } +#endif + if ((pB = i2BoardPtrTable[i]) != 0 ) { + kfree ( pB ); + i2BoardPtrTable[i] = NULL; + } + if ((DevTableMem[i]) != NULL ) { + kfree ( DevTableMem[i] ); + DevTableMem[i] = NULL; + } + } + + /* Cleanup the iiEllis subsystem. */ + iiEllisCleanup(); +#ifdef IP2DEBUG_INIT + printk (KERN_DEBUG "IP2 Unloaded\n" ); +#endif +} +#endif /* MODULE */ + +static struct tty_operations ip2_ops = { + .open = ip2_open, + .close = ip2_close, + .write = ip2_write, + .put_char = ip2_putchar, + .flush_chars = ip2_flush_chars, + .write_room = ip2_write_room, + .chars_in_buffer = ip2_chars_in_buf, + .flush_buffer = ip2_flush_buffer, + .ioctl = ip2_ioctl, + .throttle = ip2_throttle, + .unthrottle = ip2_unthrottle, + .set_termios = ip2_set_termios, + .set_ldisc = ip2_set_line_discipline, + .stop = ip2_stop, + .start = ip2_start, + .hangup = ip2_hangup, + .read_proc = ip2_read_proc, + .tiocmget = ip2_tiocmget, + .tiocmset = ip2_tiocmset, +}; + +/******************************************************************************/ +/* Function: ip2_loadmain() */ +/* Parameters: irq, io from command line of insmod et. al. */ +/* pointer to fip firmware and firmware size for boards */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This was the required entry point for all drivers (now in ip2.c) */ +/* It performs all */ +/* initialisation of the devices and driver structures, and registers itself */ +/* with the relevant kernel modules. */ +/******************************************************************************/ +/* SA_INTERRUPT- if set blocks all interrupts else only this line */ +/* SA_SHIRQ - for shared irq PCI or maybe EISA only */ +/* SA_RANDOM - can be source for cert. random number generators */ +#define IP2_SA_FLAGS 0 + +int +ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) +{ + int i, j, box; + int err = 0; + int status = 0; + static int loaded; + i2eBordStrPtr pB = NULL; + int rc = -1; + + ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 ); + + /* process command line arguments to modprobe or + insmod i.e. iop & irqp */ + /* irqp and iop should ALWAYS be specified now... But we check + them individually just to be sure, anyways... */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if (iop) { + ip2config.addr[i] = iop[i]; + if (irqp) { + if( irqp[i] >= 0 ) { + ip2config.irq[i] = irqp[i]; + } else { + ip2config.irq[i] = 0; + } + // This is a little bit of a hack. If poll_only=1 on command + // line back in ip2.c OR all IRQs on all specified boards are + // explicitly set to 0, then drop to poll only mode and override + // PCI or EISA interrupts. This superceeds the old hack of + // triggering if all interrupts were zero (like da default). + // Still a hack but less prone to random acts of terrorism. + // + // What we really should do, now that the IRQ default is set + // to -1, is to use 0 as a hard coded, do not probe. + // + // /\/\|=mhw=|\/\/ + poll_only |= irqp[i]; + } + } + } + poll_only = !poll_only; + + Fip_firmware = firmware; + Fip_firmware_size = firmsize; + + /* Announce our presence */ + printk( KERN_INFO "%s version %s\n", pcName, pcVersion ); + + // ip2 can be unloaded and reloaded for no good reason + // we can't let that happen here or bad things happen + // second load hoses board but not system - fixme later + if (loaded) { + printk( KERN_INFO "Still loaded\n" ); + return 0; + } + loaded++; + + ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); + if (!ip2_tty_driver) + return -ENOMEM; + + /* Initialise the iiEllis subsystem. */ + iiEllisInit(); + + /* Initialize arrays. */ + memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable ); + memset( DevTable, 0, sizeof DevTable ); + + /* Initialise all the boards we can find (up to the maximum). */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + switch ( ip2config.addr[i] ) { + case 0: /* skip this slot even if card is present */ + break; + default: /* ISA */ + /* ISA address must be specified */ + if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) { + printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n", + i, ip2config.addr[i] ); + ip2config.addr[i] = 0; + } else { + ip2config.type[i] = ISA; + + /* Check for valid irq argument, set for polling if invalid */ + if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) { + printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]); + ip2config.irq[i] = 0;// 0 is polling and is valid in that sense + } + } + break; + case PCI: +#ifdef CONFIG_PCI + { + struct pci_dev *pci_dev_i = NULL; + pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE, + PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i); + if (pci_dev_i != NULL) { + unsigned int addr; + + if (pci_enable_device(pci_dev_i)) { + printk( KERN_ERR "IP2: can't enable PCI device at %s\n", + pci_name(pci_dev_i)); + break; + } + ip2config.type[i] = PCI; + ip2config.pci_dev[i] = pci_dev_i; + status = + pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr); + if ( addr & 1 ) { + ip2config.addr[i]=(USHORT)(addr&0xfffe); + } else { + printk( KERN_ERR "IP2: PCI I/O address error\n"); + } + +// If the PCI BIOS assigned it, lets try and use it. If we +// can't acquire it or it screws up, deal with it then. + +// if (!is_valid_irq(pci_irq)) { +// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq); +// pci_irq = 0; +// } + ip2config.irq[i] = pci_dev_i->irq; + } else { // ann error + ip2config.addr[i] = 0; + if (status == PCIBIOS_DEVICE_NOT_FOUND) { + printk( KERN_ERR "IP2: PCI board %d not found\n", i ); + } else { + printk( KERN_ERR "IP2: PCI error 0x%x \n", status ); + } + } + } +#else + printk( KERN_ERR "IP2: PCI card specified but PCI support not\n"); + printk( KERN_ERR "IP2: configured in this kernel.\n"); + printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n"); +#endif /* CONFIG_PCI */ + break; + case EISA: + if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) { + /* Eisa_irq set as side effect, boo */ + ip2config.type[i] = EISA; + } + ip2config.irq[i] = Eisa_irq; + break; + } /* switch */ + } /* for */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( ip2config.addr[i] ) { + pB = kmalloc( sizeof(i2eBordStr), GFP_KERNEL); + if ( pB != NULL ) { + i2BoardPtrTable[i] = pB; + memset( pB, 0, sizeof(i2eBordStr) ); + iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer ); + iiReset( pB ); + } else { + printk(KERN_ERR "IP2: board memory allocation error\n"); + } + } + } + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( ( pB = i2BoardPtrTable[i] ) != NULL ) { + iiResetDelay( pB ); + break; + } + } + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] != NULL ) { + ip2_init_board( i ); + } + } + + ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 ); + + ip2_tty_driver->owner = THIS_MODULE; + ip2_tty_driver->name = "ttyF"; + ip2_tty_driver->devfs_name = "tts/F"; + ip2_tty_driver->driver_name = pcDriver_name; + ip2_tty_driver->major = IP2_TTY_MAJOR; + ip2_tty_driver->minor_start = 0; + ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; + ip2_tty_driver->init_termios = tty_std_termios; + ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + tty_set_operations(ip2_tty_driver, &ip2_ops); + + ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 ); + + /* Register the tty devices. */ + if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) { + printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err); + put_tty_driver(ip2_tty_driver); + return -EINVAL; + } else + /* Register the IPL driver. */ + if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) { + printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err ); + } else { + /* create the sysfs class */ + ip2_class = class_create(THIS_MODULE, "ip2"); + if (IS_ERR(ip2_class)) { + err = PTR_ERR(ip2_class); + goto out_chrdev; + } + } + /* Register the read_procmem thing */ + if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) { + printk(KERN_ERR "IP2: failed to register read_procmem\n"); + } else { + + ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 ); + /* Register the interrupt handler or poll handler, depending upon the + * specified interrupt. + */ + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( 0 == ip2config.addr[i] ) { + continue; + } + + if ( NULL != ( pB = i2BoardPtrTable[i] ) ) { + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i), + NULL, "ipl%d", i); + err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i), + S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, + "ip2/ipl%d", i); + if (err) { + class_device_destroy(ip2_class, + MKDEV(IP2_IPL_MAJOR, 4 * i)); + goto out_class; + } + + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + NULL, "stat%d", i); + err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, + "ip2/stat%d", i); + if (err) { + class_device_destroy(ip2_class, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); + goto out_class; + } + + for ( box = 0; box < ABS_MAX_BOXES; ++box ) + { + for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if ( pB->i2eChannelMap[box] & (1 << j) ) + { + tty_register_device(ip2_tty_driver, + j + ABS_BIGGEST_BOX * + (box+i*ABS_MAX_BOXES), NULL); + } + } + } + } + + if (poll_only) { +// Poll only forces driver to only use polling and +// to ignore the probed PCI or EISA interrupts. + ip2config.irq[i] = CIR_POLL; + } + if ( ip2config.irq[i] == CIR_POLL ) { +retry: + if (!TimerOn) { + PollTimer.expires = POLL_TIMEOUT; + add_timer ( &PollTimer ); + TimerOn = 1; + printk( KERN_INFO "IP2: polling\n"); + } + } else { + if (have_requested_irq(ip2config.irq[i])) + continue; + rc = request_irq( ip2config.irq[i], ip2_interrupt, + IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0), + pcName, (void *)&pcName); + if (rc) { + printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc); + ip2config.irq[i] = CIR_POLL; + printk( KERN_INFO "IP2: Polling %ld/sec.\n", + (POLL_TIMEOUT - jiffies)); + goto retry; + } + mark_requested_irq(ip2config.irq[i]); + /* Initialise the interrupt handler bottom half (aka slih). */ + } + } + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] ) { + set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */ + } + } + } + ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 ); + goto out; + +out_class: + class_destroy(ip2_class); +out_chrdev: + unregister_chrdev(IP2_IPL_MAJOR, "ip2"); +out: + return err; +} + +EXPORT_SYMBOL(ip2_loadmain); + +/******************************************************************************/ +/* Function: ip2_init_board() */ +/* Parameters: Index of board in configuration structure */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This function initializes the specified board. The loadware is copied to */ +/* the board, the channel structures are initialized, and the board details */ +/* are reported on the console. */ +/******************************************************************************/ +static void __init +ip2_init_board( int boardnum ) +{ + int i; + int nports = 0, nboxes = 0; + i2ChanStrPtr pCh; + i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; + + if ( !iiInitialize ( pB ) ) { + printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", + pB->i2eBase, pB->i2eError ); + goto err_initialize; + } + printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, + ip2config.addr[boardnum], ip2config.irq[boardnum] ); + + if (!request_region( ip2config.addr[boardnum], 8, pcName )) { + printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); + goto err_initialize; + } + + if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size ) + != II_DOWN_GOOD ) { + printk ( KERN_ERR "IP2: failed to download loadware\n" ); + goto err_release_region; + } else { + printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", + pB->i2ePom.e.porVersion, + pB->i2ePom.e.porRevision, + pB->i2ePom.e.porSubRev, pB->i2eLVersion, + pB->i2eLRevision, pB->i2eLSub ); + } + + switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { + + default: + printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", + pB->i2ePom.e.porID ); + nports = 0; + goto err_release_region; + break; + + case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ + printk ( KERN_INFO "IP2: ISA-4\n" ); + nports = 4; + break; + + case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ + printk ( KERN_INFO "IP2: ISA-8 std\n" ); + nports = 8; + break; + + case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ + printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); + nports = 8; + break; + + case POR_ID_FIIEX: /* IntelliPort IIEX */ + { + int portnum = IP2_PORTS_PER_BOARD * boardnum; + int box; + + for( box = 0; box < ABS_MAX_BOXES; ++box ) { + if ( pB->i2eChannelMap[box] != 0 ) { + ++nboxes; + } + for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { + if ( pB->i2eChannelMap[box] & 1<< i ) { + ++nports; + } + } + } + DevTableMem[boardnum] = pCh = + kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); + if ( !pCh ) { + printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); + goto err_release_region; + } + if ( !i2InitChannels( pB, nports, pCh ) ) { + printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); + kfree ( pCh ); + goto err_release_region; + } + pB->i2eChannelPtr = &DevTable[portnum]; + pB->i2eChannelCnt = ABS_MOST_PORTS; + + for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { + for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { + if ( pB->i2eChannelMap[box] & (1 << i) ) { + DevTable[portnum + i] = pCh; + pCh->port_index = portnum + i; + pCh++; + } + } + } + printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", + nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); + } + goto ex_exit; + } + DevTableMem[boardnum] = pCh = + kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); + if ( !pCh ) { + printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); + goto err_release_region; + } + pB->i2eChannelPtr = pCh; + pB->i2eChannelCnt = nports; + if ( !i2InitChannels( pB, nports, pCh ) ) { + printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); + kfree ( pCh ); + goto err_release_region; + } + pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; + + for( i = 0; i < pB->i2eChannelCnt; ++i ) { + DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; + pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; + pCh++; + } +ex_exit: + INIT_WORK(&pB->tqueue_interrupt, (void(*)(void*)) ip2_interrupt_bh, pB); + return; + +err_release_region: + release_region(ip2config.addr[boardnum], 8); +err_initialize: + kfree ( pB ); + i2BoardPtrTable[boardnum] = NULL; + return; +} + +/******************************************************************************/ +/* Function: find_eisa_board ( int start_slot ) */ +/* Parameters: First slot to check */ +/* Returns: Address of EISA IntelliPort II controller */ +/* */ +/* Description: */ +/* This function searches for an EISA IntelliPort controller, starting */ +/* from the specified slot number. If the motherboard is not identified as an */ +/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ +/* it returns the base address of the controller. */ +/******************************************************************************/ +static unsigned short __init +find_eisa_board( int start_slot ) +{ + int i, j; + unsigned int idm = 0; + unsigned int idp = 0; + unsigned int base = 0; + unsigned int value; + int setup_address; + int setup_irq; + int ismine = 0; + + /* + * First a check for an EISA motherboard, which we do by comparing the + * EISA ID registers for the system board and the first couple of slots. + * No slot ID should match the system board ID, but on an ISA or PCI + * machine the odds are that an empty bus will return similar values for + * each slot. + */ + i = 0x0c80; + value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); + for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { + j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); + if ( value == j ) + return 0; + } + + /* + * OK, so we are inclined to believe that this is an EISA machine. Find + * an IntelliPort controller. + */ + for( i = start_slot; i < 16; i++ ) { + base = i << 12; + idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); + idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); + ismine = 0; + if ( idm == 0x0e8e ) { + if ( idp == 0x0281 || idp == 0x0218 ) { + ismine = 1; + } else if ( idp == 0x0282 || idp == 0x0283 ) { + ismine = 3; /* Can do edge-trigger */ + } + if ( ismine ) { + Eisa_slot = i; + break; + } + } + } + if ( !ismine ) + return 0; + + /* It's some sort of EISA card, but at what address is it configured? */ + + setup_address = base + 0xc88; + value = inb(base + 0xc86); + setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; + + if ( (ismine & 2) && !(value & 0x10) ) { + ismine = 1; /* Could be edging, but not */ + } + + if ( Eisa_irq == 0 ) { + Eisa_irq = setup_irq; + } else if ( Eisa_irq != setup_irq ) { + printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); + } + +#ifdef IP2DEBUG_INIT +printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", + base >> 12, idm, idp, setup_address); + if ( Eisa_irq ) { + printk(KERN_DEBUG ", Interrupt %d %s\n", + setup_irq, (ismine & 2) ? "(edge)" : "(level)"); + } else { + printk(KERN_DEBUG ", (polled)\n"); + } +#endif + return setup_address; +} + +/******************************************************************************/ +/* Function: set_irq() */ +/* Parameters: index to board in board table */ +/* IRQ to use */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/******************************************************************************/ +static void +set_irq( int boardnum, int boardIrq ) +{ + unsigned char tempCommand[16]; + i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; + unsigned long flags; + + /* + * Notify the boards they may generate interrupts. This is done by + * sending an in-line command to channel 0 on each board. This is why + * the channels have to be defined already. For each board, if the + * interrupt has never been defined, we must do so NOW, directly, since + * board will not send flow control or even give an interrupt until this + * is done. If polling we must send 0 as the interrupt parameter. + */ + + // We will get an interrupt here at the end of this function + + iiDisableMailIrq(pB); + + /* We build up the entire packet header. */ + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_INLINE; + CMD_COUNT_OF(tempCommand) = 2; + (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; + (CMD_OF(tempCommand))[1] = boardIrq; + /* + * Write to FIFO; don't bother to adjust fifo capacity for this, since + * board will respond almost immediately after SendMail hit. + */ + WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); + iiWriteBuf(pB, tempCommand, 4); + WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); + pB->i2eUsingIrq = boardIrq; + pB->i2eOutMailWaiting |= MB_OUT_STUFFED; + + /* Need to update number of boards before you enable mailbox int */ + ++i2nBoards; + + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 6; + (CMD_OF(tempCommand))[0] = 88; // SILO + (CMD_OF(tempCommand))[1] = 64; // chars + (CMD_OF(tempCommand))[2] = 32; // ms + + (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK + (CMD_OF(tempCommand))[4] = 64; // chars + + (CMD_OF(tempCommand))[5] = 87; // HW_TEST + WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); + iiWriteBuf(pB, tempCommand, 8); + WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); + + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 1; + (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ + iiWriteBuf(pB, tempCommand, 3); + +#ifdef XXX + // enable heartbeat for test porpoises + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 2; + (CMD_OF(tempCommand))[0] = 44; /* get ping */ + (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ + WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); + iiWriteBuf(pB, tempCommand, 4); + WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); +#endif + + iiEnableMailIrq(pB); + iiSendPendingMail(pB); +} + +/******************************************************************************/ +/* Interrupt Handler Section */ +/******************************************************************************/ + +static inline void +service_all_boards(void) +{ + int i; + i2eBordStrPtr pB; + + /* Service every board on the list */ + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + pB = i2BoardPtrTable[i]; + if ( pB ) { + i2ServiceBoard( pB ); + } + } +} + + +/******************************************************************************/ +/* Function: ip2_interrupt_bh(pB) */ +/* Parameters: pB - pointer to the board structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* Service the board in a bottom half interrupt handler and then */ +/* reenable the board's interrupts if it has an IRQ number */ +/* */ +/******************************************************************************/ +static void +ip2_interrupt_bh(i2eBordStrPtr pB) +{ +// pB better well be set or we have a problem! We can only get +// here from the IMMEDIATE queue. Here, we process the boards. +// Checking pB doesn't cost much and it saves us from the sanity checkers. + + bh_counter++; + + if ( pB ) { + i2ServiceBoard( pB ); + if( pB->i2eUsingIrq ) { +// Re-enable his interrupts + iiEnableMailIrq(pB); + } + } +} + + +/******************************************************************************/ +/* Function: ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) */ +/* Parameters: irq - interrupt number */ +/* pointer to optional device ID structure */ +/* pointer to register structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* Our task here is simply to identify each board which needs servicing. */ +/* If we are queuing then, queue it to be serviced, and disable its irq */ +/* mask otherwise process the board directly. */ +/* */ +/* We could queue by IRQ but that just complicates things on both ends */ +/* with very little gain in performance (how many instructions does */ +/* it take to iterate on the immediate queue). */ +/* */ +/* */ +/******************************************************************************/ +static irqreturn_t +ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + int i; + i2eBordStrPtr pB; + int handled = 0; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq ); + + /* Service just the boards on the list using this irq */ + for( i = 0; i < i2nBoards; ++i ) { + pB = i2BoardPtrTable[i]; + +// Only process those boards which match our IRQ. +// IRQ = 0 for polled boards, we won't poll "IRQ" boards + + if ( pB && (pB->i2eUsingIrq == irq) ) { + handled = 1; +#ifdef USE_IQI + + if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { +// Disable his interrupt (will be enabled when serviced) +// This is mostly to protect from reentrancy. + iiDisableMailIrq(pB); + +// Park the board on the immediate queue for processing. + schedule_work(&pB->tqueue_interrupt); + +// Make sure the immediate queue is flagged to fire. + } +#else +// We are using immediate servicing here. This sucks and can +// cause all sorts of havoc with ppp and others. The failsafe +// check on iiSendPendingMail could also throw a hairball. + i2ServiceBoard( pB ); +#endif /* USE_IQI */ + } + } + + ++irq_counter; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); + return IRQ_RETVAL(handled); +} + +/******************************************************************************/ +/* Function: ip2_poll(unsigned long arg) */ +/* Parameters: ? */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function calls the library routine i2ServiceBoard for each board in */ +/* the board table. This is used instead of the interrupt routine when polled */ +/* mode is specified. */ +/******************************************************************************/ +static void +ip2_poll(unsigned long arg) +{ + ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); + + TimerOn = 0; // it's the truth but not checked in service + + // Just polled boards, IRQ = 0 will hit all non-interrupt boards. + // It will NOT poll boards handled by hard interrupts. + // The issue of queued BH interrups is handled in ip2_interrupt(). + ip2_interrupt(0, NULL, NULL); + + PollTimer.expires = POLL_TIMEOUT; + add_timer( &PollTimer ); + TimerOn = 1; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); +} + +static void do_input(void *p) +{ + i2ChanStrPtr pCh = p; + unsigned long flags; + + ip2trace(CHANN, ITRC_INPUT, 21, 0 ); + + // Data input + if ( pCh->pTTY != NULL ) { + READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) + if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) + i2Input( pCh ); + } else + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) + } else { + ip2trace(CHANN, ITRC_INPUT, 22, 0 ); + + i2InputFlush( pCh ); + } +} + +// code duplicated from n_tty (ldisc) +static inline void isig(int sig, struct tty_struct *tty, int flush) +{ + if (tty->pgrp > 0) + kill_pg(tty->pgrp, sig, 1); + if (flush || !L_NOFLSH(tty)) { + if ( tty->ldisc.flush_buffer ) + tty->ldisc.flush_buffer(tty); + i2InputFlush( tty->driver_data ); + } +} + +static void do_status(void *p) +{ + i2ChanStrPtr pCh = p; + int status; + + status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); + + ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); + + if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { + if ( (status & I2_BRK) ) { + // code duplicated from n_tty (ldisc) + if (I_IGNBRK(pCh->pTTY)) + goto skip_this; + if (I_BRKINT(pCh->pTTY)) { + isig(SIGINT, pCh->pTTY, 1); + goto skip_this; + } + wake_up_interruptible(&pCh->pTTY->read_wait); + } +#ifdef NEVER_HAPPENS_AS_SETUP_XXX + // and can't work because we don't know the_char + // as the_char is reported on a separate path + // The intelligent board does this stuff as setup + { + char brkf = TTY_NORMAL; + unsigned char brkc = '\0'; + unsigned char tmp; + if ( (status & I2_BRK) ) { + brkf = TTY_BREAK; + brkc = '\0'; + } + else if (status & I2_PAR) { + brkf = TTY_PARITY; + brkc = the_char; + } else if (status & I2_FRA) { + brkf = TTY_FRAME; + brkc = the_char; + } else if (status & I2_OVR) { + brkf = TTY_OVERRUN; + brkc = the_char; + } + tmp = pCh->pTTY->real_raw; + pCh->pTTY->real_raw = 0; + pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); + pCh->pTTY->real_raw = tmp; + } +#endif /* NEVER_HAPPENS_AS_SETUP_XXX */ + } +skip_this: + + if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { + wake_up_interruptible(&pCh->delta_msr_wait); + + if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { + if ( status & I2_DCD ) { + if ( pCh->wopen ) { + wake_up_interruptible ( &pCh->open_wait ); + } + } else { + if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { + tty_hangup( pCh->pTTY ); + } + } + } + } + + ip2trace (CHANN, ITRC_STATUS, 26, 0 ); +} + +/******************************************************************************/ +/* Device Open/Close/Ioctl Entry Point Section */ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: open_sanity_check() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* Verifies the structure magic numbers and cross links. */ +/******************************************************************************/ +#ifdef IP2DEBUG_OPEN +static void +open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) +{ + if ( pBrd->i2eValid != I2E_MAGIC ) { + printk(KERN_ERR "IP2: invalid board structure\n" ); + } else if ( pBrd != pCh->pMyBord ) { + printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", + pCh->pMyBord ); + } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { + printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); + } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { + } else { + printk(KERN_INFO "IP2: all pointers check out!\n" ); + } +} +#endif + + +/******************************************************************************/ +/* Function: ip2_open() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: (MANDATORY) */ +/* A successful device open has to run a gauntlet of checks before it */ +/* completes. After some sanity checking and pointer setup, the function */ +/* blocks until all conditions are satisfied. It then initialises the port to */ +/* the default characteristics and returns. */ +/******************************************************************************/ +static int +ip2_open( PTTY tty, struct file *pFile ) +{ + wait_queue_t wait; + int rc = 0; + int do_clocal = 0; + i2ChanStrPtr pCh = DevTable[tty->index]; + + ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); + + if ( pCh == NULL ) { + return -ENODEV; + } + /* Setup pointer links in device and tty structures */ + pCh->pTTY = tty; + tty->driver_data = pCh; + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG \ + "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", + tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); + open_sanity_check ( pCh, pCh->pMyBord ); +#endif + + i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + serviceOutgoingFifo( pCh->pMyBord ); + + /* Block here until the port is ready (per serial and istallion) */ + /* + * 1. If the port is in the middle of closing wait for the completion + * and then return the appropriate error. + */ + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->close_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { + if ( pCh->flags & ASYNC_CLOSING ) { + schedule(); + } + if ( tty_hung_up_p(pFile) ) { + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->close_wait, &wait); + return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; + } + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->close_wait, &wait); + + /* + * 3. Handle a non-blocking open of a normal port. + */ + if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) { + pCh->flags |= ASYNC_NORMAL_ACTIVE; + goto noblock; + } + /* + * 4. Now loop waiting for the port to be free and carrier present + * (if required). + */ + if ( tty->termios->c_cflag & CLOCAL ) + do_clocal = 1; + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); +#endif + + ++pCh->wopen; + + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->open_wait, &wait); + + for(;;) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + set_current_state( TASK_INTERRUPTIBLE ); + serviceOutgoingFifo( pCh->pMyBord ); + if ( tty_hung_up_p(pFile) ) { + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->open_wait, &wait); + return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; + } + if (!(pCh->flags & ASYNC_CLOSING) && + (do_clocal || (pCh->dataSetIn & I2_DCD) )) { + rc = 0; + break; + } + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", + (pCh->flags & ASYNC_CLOSING)?"True":"False"); + printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); +#endif + ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, + (pCh->flags & ASYNC_CLOSING) ); + /* check for signal */ + if (signal_pending(current)) { + rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); + break; + } + schedule(); + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->open_wait, &wait); + + --pCh->wopen; //why count? + + ip2trace (CHANN, ITRC_OPEN, 4, 0 ); + + if (rc != 0 ) { + return rc; + } + pCh->flags |= ASYNC_NORMAL_ACTIVE; + +noblock: + + /* first open - Assign termios structure to port */ + if ( tty->count == 1 ) { + i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + /* Now we must send the termios settings to the loadware */ + set_params( pCh, NULL ); + } + + /* + * Now set any i2lib options. These may go away if the i2lib code ends + * up rolled into the mainline. + */ + pCh->channelOptions |= CO_NBLOCK_WRITE; + +#ifdef IP2DEBUG_OPEN + printk (KERN_DEBUG "IP2: open completed\n" ); +#endif + serviceOutgoingFifo( pCh->pMyBord ); + + ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); + + return 0; +} + +/******************************************************************************/ +/* Function: ip2_close() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_close( PTTY tty, struct file *pFile ) +{ + i2ChanStrPtr pCh = tty->driver_data; + + if ( !pCh ) { + return; + } + + ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "IP2:close %s:\n",tty->name); +#endif + + if ( tty_hung_up_p ( pFile ) ) { + + ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); + + return; + } + if ( tty->count > 1 ) { /* not the last close */ + + ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); + + return; + } + pCh->flags |= ASYNC_CLOSING; // last close actually + + tty->closing = 1; + + if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { + /* + * Before we drop DTR, make sure the transmitter has completely drained. + * This uses an timeout, after which the close + * completes. + */ + ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); + } + /* + * At this point we stop accepting input. Here we flush the channel + * input buffer which will allow the board to send up more data. Any + * additional input is tossed at interrupt/poll time. + */ + i2InputFlush( pCh ); + + /* disable DSS reporting */ + i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, + CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + if ( !tty || (tty->termios->c_cflag & HUPCL) ) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + } + + serviceOutgoingFifo ( pCh->pMyBord ); + + if ( tty->driver->flush_buffer ) + tty->driver->flush_buffer(tty); + if ( tty->ldisc.flush_buffer ) + tty->ldisc.flush_buffer(tty); + tty->closing = 0; + + pCh->pTTY = NULL; + + if (pCh->wopen) { + if (pCh->ClosingDelay) { + msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); + } + wake_up_interruptible(&pCh->open_wait); + } + + pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&pCh->close_wait); + +#ifdef IP2DEBUG_OPEN + DBG_CNT("ip2_close: after wakeups--"); +#endif + + + ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); + + return; +} + +/******************************************************************************/ +/* Function: ip2_hangup() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_hangup ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + + if( !pCh ) { + return; + } + + ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); + + ip2_flush_buffer(tty); + + /* disable DSS reporting */ + + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); + i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + if ( (tty->termios->c_cflag & HUPCL) ) { + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + } + i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, + CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + serviceOutgoingFifo ( pCh->pMyBord ); + + wake_up_interruptible ( &pCh->delta_msr_wait ); + + pCh->flags &= ~ASYNC_NORMAL_ACTIVE; + pCh->pTTY = NULL; + wake_up_interruptible ( &pCh->open_wait ); + + ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); +} + +/******************************************************************************/ +/******************************************************************************/ +/* Device Output Section */ +/******************************************************************************/ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_write() */ +/* Parameters: Pointer to tty structure */ +/* Flag denoting data is in user (1) or kernel (0) space */ +/* Pointer to data */ +/* Number of bytes to write */ +/* Returns: Number of bytes actually written */ +/* */ +/* Description: (MANDATORY) */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_write( PTTY tty, const unsigned char *pData, int count) +{ + i2ChanStrPtr pCh = tty->driver_data; + int bytesSent = 0; + unsigned long flags; + + ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); + + /* Flush out any buffered data left over from ip2_putchar() calls. */ + ip2_flush_chars( tty ); + + /* This is the actual move bit. Make sure it does what we need!!!!! */ + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + bytesSent = i2Output( pCh, pData, count, 0 ); + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + + ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); + + return bytesSent > 0 ? bytesSent : 0; +} + +/******************************************************************************/ +/* Function: ip2_putchar() */ +/* Parameters: Pointer to tty structure */ +/* Character to write */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_putchar( PTTY tty, unsigned char ch ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + +// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); + + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + pCh->Pbuf[pCh->Pbuf_stuff++] = ch; + if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + ip2_flush_chars( tty ); + } else + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + +// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); +} + +/******************************************************************************/ +/* Function: ip2_flush_chars() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/******************************************************************************/ +static void +ip2_flush_chars( PTTY tty ) +{ + int strip; + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + if ( pCh->Pbuf_stuff ) { + +// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); + + // + // We may need to restart i2Output if it does not fullfill this request + // + strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff, 0 ); + if ( strip != pCh->Pbuf_stuff ) { + memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); + } + pCh->Pbuf_stuff -= strip; + } + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); +} + +/******************************************************************************/ +/* Function: ip2_write_room() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Number of bytes that the driver can accept */ +/* */ +/* Description: */ +/* */ +/******************************************************************************/ +static int +ip2_write_room ( PTTY tty ) +{ + int bytesFree; + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; + READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + + ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); + + return ((bytesFree > 0) ? bytesFree : 0); +} + +/******************************************************************************/ +/* Function: ip2_chars_in_buf() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Number of bytes queued for transmission */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_chars_in_buf ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + int rc; + unsigned long flags; + + ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); + +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", + pCh->Obuf_char_count + pCh->Pbuf_stuff, + pCh->Obuf_char_count, pCh->Pbuf_stuff ); +#endif + READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags); + rc = pCh->Obuf_char_count; + READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags); + READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + rc += pCh->Pbuf_stuff; + READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + return rc; +} + +/******************************************************************************/ +/* Function: ip2_flush_buffer() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_flush_buffer( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); + +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: flush buffer\n" ); +#endif + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + pCh->Pbuf_stuff = 0; + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + i2FlushOutput( pCh ); + ip2_owake(tty); + + ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); + +} + +/******************************************************************************/ +/* Function: ip2_wait_until_sent() */ +/* Parameters: Pointer to tty structure */ +/* Timeout for wait. */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function is used in place of the normal tty_wait_until_sent, which */ +/* only waits for the driver buffers to be empty (or rather, those buffers */ +/* reported by chars_in_buffer) which doesn't work for IP2 due to the */ +/* indeterminate number of bytes buffered on the board. */ +/******************************************************************************/ +static void +ip2_wait_until_sent ( PTTY tty, int timeout ) +{ + int i = jiffies; + i2ChanStrPtr pCh = tty->driver_data; + + tty_wait_until_sent(tty, timeout ); + if ( (i = timeout - (jiffies -i)) > 0) + i2DrainOutput( pCh, i ); +} + +/******************************************************************************/ +/******************************************************************************/ +/* Device Input Section */ +/******************************************************************************/ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_throttle() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_throttle ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "IP2: throttle\n" ); +#endif + /* + * Signal the poll/interrupt handlers not to forward incoming data to + * the line discipline. This will cause the buffers to fill up in the + * library and thus cause the library routines to send the flow control + * stuff. + */ + pCh->throttled = 1; +} + +/******************************************************************************/ +/* Function: ip2_unthrottle() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_unthrottle ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "IP2: unthrottle\n" ); +#endif + + /* Pass incoming data up to the line discipline again. */ + pCh->throttled = 0; + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); + serviceOutgoingFifo( pCh->pMyBord ); + READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) + if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "i2Input called from unthrottle\n" ); +#endif + i2Input( pCh ); + } else + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) +} + +static void +ip2_start ( PTTY tty ) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: start tx\n" ); +#endif +} + +static void +ip2_stop ( PTTY tty ) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: stop tx\n" ); +#endif +} + +/******************************************************************************/ +/* Device Ioctl Section */ +/******************************************************************************/ + +static int ip2_tiocmget(struct tty_struct *tty, struct file *file) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; +#ifdef ENABLE_DSSNOW + wait_queue_t wait; +#endif + + if (pCh == NULL) + return -ENODEV; + +/* + FIXME - the following code is causing a NULL pointer dereference in + 2.3.51 in an interrupt handler. It's suppose to prompt the board + to return the DSS signal status immediately. Why doesn't it do + the same thing in 2.2.14? +*/ + +/* This thing is still busted in the 1.2.12 driver on 2.4.x + and even hoses the serial console so the oops can be trapped. + /\/\|=mhw=|\/\/ */ + +#ifdef ENABLE_DSSNOW + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); + + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->dss_now_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pCh->pMyBord ); + + schedule(); + + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->dss_now_wait, &wait); + + if (signal_pending(current)) { + return -EINTR; + } +#endif + return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) + | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) + | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) + | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) + | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) + | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); +} + +static int ip2_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + if (pCh == NULL) + return -ENODEV; + + if (set & TIOCM_RTS) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); + pCh->dataSetOut |= I2_RTS; + } + if (set & TIOCM_DTR) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); + pCh->dataSetOut |= I2_DTR; + } + + if (clear & TIOCM_RTS) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); + pCh->dataSetOut &= ~I2_RTS; + } + if (clear & TIOCM_DTR) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); + pCh->dataSetOut &= ~I2_DTR; + } + serviceOutgoingFifo( pCh->pMyBord ); + return 0; +} + +/******************************************************************************/ +/* Function: ip2_ioctl() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Command */ +/* Argument */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) +{ + wait_queue_t wait; + i2ChanStrPtr pCh = DevTable[tty->index]; + i2eBordStrPtr pB; + struct async_icount cprev, cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; + int rc = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if ( pCh == NULL ) + return -ENODEV; + + pB = pCh->pMyBord; + + ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); + +#ifdef IP2DEBUG_IOCTL + printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); +#endif + + switch(cmd) { + case TIOCGSERIAL: + + ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); + + rc = get_serial_info(pCh, argp); + if (rc) + return rc; + break; + + case TIOCSSERIAL: + + ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); + + rc = set_serial_info(pCh, argp); + if (rc) + return rc; + break; + + case TCXONC: + rc = tty_check_change(tty); + if (rc) + return rc; + switch (arg) { + case TCOOFF: + //return -ENOIOCTLCMD; + break; + case TCOON: + //return -ENOIOCTLCMD; + break; + case TCIOFF: + if (STOP_CHAR(tty) != __DISABLED_CHAR) { + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, + CMD_XMIT_NOW(STOP_CHAR(tty))); + } + break; + case TCION: + if (START_CHAR(tty) != __DISABLED_CHAR) { + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, + CMD_XMIT_NOW(START_CHAR(tty))); + } + break; + default: + return -EINVAL; + } + return 0; + + case TCSBRK: /* SVID version: non-zero arg --> no break */ + rc = tty_check_change(tty); + + ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); + + if (!rc) { + ip2_wait_until_sent(tty,0); + if (!arg) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); + serviceOutgoingFifo( pCh->pMyBord ); + } + } + break; + + case TCSBRKP: /* support for POSIX tcsendbreak() */ + rc = tty_check_change(tty); + + ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); + + if (!rc) { + ip2_wait_until_sent(tty,0); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_SEND_BRK(arg ? arg*100 : 250)); + serviceOutgoingFifo ( pCh->pMyBord ); + } + break; + + case TIOCGSOFTCAR: + + ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); + + rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); + if (rc) + return rc; + break; + + case TIOCSSOFTCAR: + + ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); + + rc = get_user(arg,(unsigned long __user *) argp); + if (rc) + return rc; + tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) + | (arg ? CLOCAL : 0)); + + break; + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask + * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS + * for masking). Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); + cprev = pCh->icount; /* note the counters on entry */ + WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, + CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->delta_msr_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pCh->pMyBord ); + for(;;) { + ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); + + schedule(); + + ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); + + /* see if a signal did it */ + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; /* atomic copy */ + WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; /* no change => rc */ + break; + } + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + rc = 0; + break; + } + cprev = cnow; + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->delta_msr_wait, &wait); + + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, + CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + if ( ! (pCh->flags & ASYNC_CHECK_CD)) { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); + } + serviceOutgoingFifo( pCh->pMyBord ); + return rc; + break; + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for RI where + * only 0->1 is counted. The controller is quite capable of counting + * both, but this done to preserve compatibility with the standard + * serial driver. + */ + case TIOCGICOUNT: + ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc ); + + WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; + WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); + p_cuser = argp; + rc = put_user(cnow.cts, &p_cuser->cts); + rc = put_user(cnow.dsr, &p_cuser->dsr); + rc = put_user(cnow.rng, &p_cuser->rng); + rc = put_user(cnow.dcd, &p_cuser->dcd); + rc = put_user(cnow.rx, &p_cuser->rx); + rc = put_user(cnow.tx, &p_cuser->tx); + rc = put_user(cnow.frame, &p_cuser->frame); + rc = put_user(cnow.overrun, &p_cuser->overrun); + rc = put_user(cnow.parity, &p_cuser->parity); + rc = put_user(cnow.brk, &p_cuser->brk); + rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); + break; + + /* + * The rest are not supported by this driver. By returning -ENOIOCTLCMD they + * will be passed to the line discipline for it to handle. + */ + case TIOCSERCONFIG: + case TIOCSERGWILD: + case TIOCSERGETLSR: + case TIOCSERSWILD: + case TIOCSERGSTRUCT: + case TIOCSERGETMULTI: + case TIOCSERSETMULTI: + + default: + ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); + + rc = -ENOIOCTLCMD; + break; + } + + ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); + + return rc; +} + +/******************************************************************************/ +/* Function: GetSerialInfo() */ +/* Parameters: Pointer to channel structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This is to support the setserial command, and requires processing of the */ +/* standard Linux serial structure. */ +/******************************************************************************/ +static int +get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) +{ + struct serial_struct tmp; + + memset ( &tmp, 0, sizeof(tmp) ); + tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; + if (BID_HAS_654(tmp.type)) { + tmp.type = PORT_16650; + } else { + tmp.type = PORT_CIRRUS; + } + tmp.line = pCh->port_index; + tmp.port = pCh->pMyBord->i2eBase; + tmp.irq = ip2config.irq[pCh->port_index/64]; + tmp.flags = pCh->flags; + tmp.baud_base = pCh->BaudBase; + tmp.close_delay = pCh->ClosingDelay; + tmp.closing_wait = pCh->ClosingWaitTime; + tmp.custom_divisor = pCh->BaudDivisor; + return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); +} + +/******************************************************************************/ +/* Function: SetSerialInfo() */ +/* Parameters: Pointer to channel structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function provides support for setserial, which uses the TIOCSSERIAL */ +/* ioctl. Not all setserial parameters are relevant. If the user attempts to */ +/* change the IRQ, address or type of the port the ioctl fails. */ +/******************************************************************************/ +static int +set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) +{ + struct serial_struct ns; + int old_flags, old_baud_divisor; + + if (copy_from_user(&ns, new_info, sizeof (ns))) + return -EFAULT; + + /* + * We don't allow setserial to change IRQ, board address, type or baud + * base. Also line nunber as such is meaningless but we use it for our + * array index so it is fixed also. + */ + if ( (ns.irq != ip2config.irq[pCh->port_index]) + || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) + || (ns.baud_base != pCh->BaudBase) + || (ns.line != pCh->port_index) ) { + return -EINVAL; + } + + old_flags = pCh->flags; + old_baud_divisor = pCh->BaudDivisor; + + if ( !capable(CAP_SYS_ADMIN) ) { + if ( ( ns.close_delay != pCh->ClosingDelay ) || + ( (ns.flags & ~ASYNC_USR_MASK) != + (pCh->flags & ~ASYNC_USR_MASK) ) ) { + return -EPERM; + } + + pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | + (ns.flags & ASYNC_USR_MASK); + pCh->BaudDivisor = ns.custom_divisor; + } else { + pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | + (ns.flags & ASYNC_FLAGS); + pCh->BaudDivisor = ns.custom_divisor; + pCh->ClosingDelay = ns.close_delay * HZ/100; + pCh->ClosingWaitTime = ns.closing_wait * HZ/100; + } + + if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) + || (old_baud_divisor != pCh->BaudDivisor) ) { + // Invalidate speed and reset parameters + set_params( pCh, NULL ); + } + + return 0; +} + +/******************************************************************************/ +/* Function: ip2_set_termios() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_set_termios( PTTY tty, struct termios *old_termios ) +{ + i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; + +#ifdef IP2DEBUG_IOCTL + printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); +#endif + + set_params( pCh, old_termios ); +} + +/******************************************************************************/ +/* Function: ip2_set_line_discipline() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: Does nothing */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_set_line_discipline ( PTTY tty ) +{ +#ifdef IP2DEBUG_IOCTL + printk (KERN_DEBUG "IP2: set line discipline\n" ); +#endif + + ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); + +} + +/******************************************************************************/ +/* Function: SetLine Characteristics() */ +/* Parameters: Pointer to channel structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This routine is called to update the channel structure with the new line */ +/* characteristics, and send the appropriate commands to the board when they */ +/* change. */ +/******************************************************************************/ +static void +set_params( i2ChanStrPtr pCh, struct termios *o_tios ) +{ + tcflag_t cflag, iflag, lflag; + char stop_char, start_char; + struct termios dummy; + + lflag = pCh->pTTY->termios->c_lflag; + cflag = pCh->pTTY->termios->c_cflag; + iflag = pCh->pTTY->termios->c_iflag; + + if (o_tios == NULL) { + dummy.c_lflag = ~lflag; + dummy.c_cflag = ~cflag; + dummy.c_iflag = ~iflag; + o_tios = &dummy; + } + + { + switch ( cflag & CBAUD ) { + case B0: + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); + goto service_it; + break; + case B38400: + /* + * This is the speed that is overloaded with all the other high + * speeds, depending upon the flag settings. + */ + if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { + pCh->speed = CBR_57600; + } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { + pCh->speed = CBR_115200; + } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { + pCh->speed = CBR_C1; + } else { + pCh->speed = CBR_38400; + } + break; + case B50: pCh->speed = CBR_50; break; + case B75: pCh->speed = CBR_75; break; + case B110: pCh->speed = CBR_110; break; + case B134: pCh->speed = CBR_134; break; + case B150: pCh->speed = CBR_150; break; + case B200: pCh->speed = CBR_200; break; + case B300: pCh->speed = CBR_300; break; + case B600: pCh->speed = CBR_600; break; + case B1200: pCh->speed = CBR_1200; break; + case B1800: pCh->speed = CBR_1800; break; + case B2400: pCh->speed = CBR_2400; break; + case B4800: pCh->speed = CBR_4800; break; + case B9600: pCh->speed = CBR_9600; break; + case B19200: pCh->speed = CBR_19200; break; + case B57600: pCh->speed = CBR_57600; break; + case B115200: pCh->speed = CBR_115200; break; + case B153600: pCh->speed = CBR_153600; break; + case B230400: pCh->speed = CBR_230400; break; + case B307200: pCh->speed = CBR_307200; break; + case B460800: pCh->speed = CBR_460800; break; + case B921600: pCh->speed = CBR_921600; break; + default: pCh->speed = CBR_9600; break; + } + if ( pCh->speed == CBR_C1 ) { + // Process the custom speed parameters. + int bps = pCh->BaudBase / pCh->BaudDivisor; + if ( bps == 921600 ) { + pCh->speed = CBR_921600; + } else { + bps = bps/10; + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); + } + } + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); + + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + } + if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) + { + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, + CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); + } + if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) + { + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, + CMD_SETPAR( + (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) + ) + ); + } + /* byte size and parity */ + if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) + { + int datasize; + switch ( cflag & CSIZE ) { + case CS5: datasize = CSZ_5; break; + case CS6: datasize = CSZ_6; break; + case CS7: datasize = CSZ_7; break; + case CS8: datasize = CSZ_8; break; + default: datasize = CSZ_5; break; /* as per serial.c */ + } + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); + } + /* Process CTS flow control flag setting */ + if ( (cflag & CRTSCTS) ) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, + 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); + } else { + i2QueueCommands(PTYPE_INLINE, pCh, 100, + 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + } + // + // Process XON/XOFF flow control flags settings + // + stop_char = STOP_CHAR(pCh->pTTY); + start_char = START_CHAR(pCh->pTTY); + + //////////// can't be \000 + if (stop_char == __DISABLED_CHAR ) + { + stop_char = ~__DISABLED_CHAR; + } + if (start_char == __DISABLED_CHAR ) + { + start_char = ~__DISABLED_CHAR; + } + ///////////////////////////////// + + if ( o_tios->c_cc[VSTART] != start_char ) + { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); + } + if ( o_tios->c_cc[VSTOP] != stop_char ) + { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); + } + if (stop_char == __DISABLED_CHAR ) + { + stop_char = ~__DISABLED_CHAR; //TEST123 + goto no_xoff; + } + if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) + { + if ( iflag & IXOFF ) { // Enable XOFF output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); + } else { // Disable XOFF output flow control +no_xoff: + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); + } + } + if (start_char == __DISABLED_CHAR ) + { + goto no_xon; + } + if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) + { + if ( iflag & IXON ) { + if ( iflag & IXANY ) { // Enable XON/XANY output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); + } else { // Enable XON output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); + } + } else { // Disable XON output flow control +no_xon: + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); + } + } + if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) + { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); + } + if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) + { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); + } + + if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) + ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) + { + char brkrpt = 0; + char parrpt = 0; + + if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ + /* Ignore breaks altogether */ + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); + } else { + if ( iflag & BRKINT ) { + if ( iflag & PARMRK ) { + brkrpt = 0x0a; // exception an inline triple + } else { + brkrpt = 0x1a; // exception and NULL + } + brkrpt |= 0x04; // flush input + } else { + if ( iflag & PARMRK ) { + brkrpt = 0x0b; //POSIX triple \0377 \0 \0 + } else { + brkrpt = 0x01; // Null only + } + } + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); + } + + if (iflag & IGNPAR) { + parrpt = 0x20; + /* would be 2 for not cirrus bug */ + /* would be 0x20 cept for cirrus bug */ + } else { + if ( iflag & PARMRK ) { + /* + * Replace error characters with 3-byte sequence (\0377,\0,char) + */ + parrpt = 0x04 ; + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); + } else { + parrpt = 0x03; + } + } + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); + } + if (cflag & CLOCAL) { + // Status reporting fails for DCD if this is off + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); + pCh->flags &= ~ASYNC_CHECK_CD; + } else { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); + pCh->flags |= ASYNC_CHECK_CD; + } + +service_it: + i2DrainOutput( pCh, 100 ); +} + +/******************************************************************************/ +/* IPL Device Section */ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_ipl_read() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Pointer to data */ +/* Number of bytes to read */ +/* Returns: Success or failure */ +/* */ +/* Description: Ugly */ +/* */ +/* */ +/******************************************************************************/ + +static +ssize_t +ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) +{ + unsigned int minor = iminor(pFile->f_dentry->d_inode); + int rc = 0; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); +#endif + + switch( minor ) { + case 0: // IPL device + rc = -EINVAL; + break; + case 1: // Status dump + rc = -EINVAL; + break; + case 2: // Ping device + rc = -EINVAL; + break; + case 3: // Trace device + rc = DumpTraceBuffer ( pData, count ); + break; + case 4: // Trace device + rc = DumpFifoBuffer ( pData, count ); + break; + default: + rc = -ENODEV; + break; + } + return rc; +} + +static int +DumpFifoBuffer ( char __user *pData, int count ) +{ +#ifdef DEBUG_FIFO + int rc; + rc = copy_to_user(pData, DBGBuf, count); + + printk(KERN_DEBUG "Last index %d\n", I ); + + return count; +#endif /* DEBUG_FIFO */ + return 0; +} + +static int +DumpTraceBuffer ( char __user *pData, int count ) +{ +#ifdef IP2DEBUG_TRACE + int rc; + int dumpcount; + int chunk; + int *pIndex = (int __user *)pData; + + if ( count < (sizeof(int) * 6) ) { + return -EIO; + } + rc = put_user(tracewrap, pIndex ); + rc = put_user(TRACEMAX, ++pIndex ); + rc = put_user(tracestrip, ++pIndex ); + rc = put_user(tracestuff, ++pIndex ); + pData += sizeof(int) * 6; + count -= sizeof(int) * 6; + + dumpcount = tracestuff - tracestrip; + if ( dumpcount < 0 ) { + dumpcount += TRACEMAX; + } + if ( dumpcount > count ) { + dumpcount = count; + } + chunk = TRACEMAX - tracestrip; + if ( dumpcount > chunk ) { + rc = copy_to_user(pData, &tracebuf[tracestrip], + chunk * sizeof(tracebuf[0]) ); + pData += chunk * sizeof(tracebuf[0]); + tracestrip = 0; + chunk = dumpcount - chunk; + } else { + chunk = dumpcount; + } + rc = copy_to_user(pData, &tracebuf[tracestrip], + chunk * sizeof(tracebuf[0]) ); + tracestrip += chunk; + tracewrap = 0; + + rc = put_user(tracestrip, ++pIndex ); + rc = put_user(tracestuff, ++pIndex ); + + return dumpcount; +#else + return 0; +#endif +} + +/******************************************************************************/ +/* Function: ip2_ipl_write() */ +/* Parameters: */ +/* Pointer to file structure */ +/* Pointer to data */ +/* Number of bytes to write */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static ssize_t +ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) +{ +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); +#endif + return 0; +} + +/******************************************************************************/ +/* Function: ip2_ipl_ioctl() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Command */ +/* Argument */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg ) +{ + unsigned int iplminor = iminor(pInode); + int rc = 0; + void __user *argp = (void __user *)arg; + ULONG __user *pIndex = argp; + i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; + i2ChanStrPtr pCh; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); +#endif + + switch ( iplminor ) { + case 0: // IPL device + rc = -EINVAL; + break; + case 1: // Status dump + case 5: + case 9: + case 13: + switch ( cmd ) { + case 64: /* Driver - ip2stat */ + rc = put_user(ip2_tty_driver->refcount, pIndex++ ); + rc = put_user(irq_counter, pIndex++ ); + rc = put_user(bh_counter, pIndex++ ); + break; + + case 65: /* Board - ip2stat */ + if ( pB ) { + rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); + rc = put_user(INB(pB->i2eStatus), + (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); + } else { + rc = -ENODEV; + } + break; + + default: + if (cmd < IP2_MAX_PORTS) { + pCh = DevTable[cmd]; + if ( pCh ) + { + rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); + } else { + rc = -ENODEV; + } + } else { + rc = -EINVAL; + } + } + break; + + case 2: // Ping device + rc = -EINVAL; + break; + case 3: // Trace device + /* + * akpm: This used to write a whole bunch of function addresses + * to userspace, which generated lots of put_user() warnings. + * I killed it all. Just return "success" and don't do + * anything. + */ + if (cmd == 1) + rc = 0; + else + rc = -EINVAL; + break; + + default: + rc = -ENODEV; + break; + } + return rc; +} + +/******************************************************************************/ +/* Function: ip2_ipl_open() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ipl_open( struct inode *pInode, struct file *pFile ) +{ + unsigned int iplminor = iminor(pInode); + i2eBordStrPtr pB; + i2ChanStrPtr pCh; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: open\n" ); +#endif + + switch(iplminor) { + // These are the IPL devices + case 0: + case 4: + case 8: + case 12: + break; + + // These are the status devices + case 1: + case 5: + case 9: + case 13: + break; + + // These are the debug devices + case 2: + case 6: + case 10: + case 14: + pB = i2BoardPtrTable[iplminor / 4]; + pCh = (i2ChanStrPtr) pB->i2eChannelPtr; + break; + + // This is the trace device + case 3: + break; + } + return 0; +} +/******************************************************************************/ +/* Function: ip2_read_procmem */ +/* Parameters: */ +/* */ +/* Returns: Length of output */ +/* */ +/* Description: */ +/* Supplies some driver operating parameters */ +/* Not real useful unless your debugging the fifo */ +/* */ +/******************************************************************************/ + +#define LIMIT (PAGE_SIZE - 120) + +static int +ip2_read_procmem(char *buf, char **start, off_t offset, int len) +{ + i2eBordStrPtr pB; + i2ChanStrPtr pCh; + PTTY tty; + int i; + + len = 0; + +#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" +#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" +#define FMTLIN3 " 0x%04x 0x%04x rc flow\n" + + len += sprintf(buf+len,"\n"); + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + pB = i2BoardPtrTable[i]; + if ( pB ) { + len += sprintf(buf+len,"board %d:\n",i); + len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n", + pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); + } + } + + len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n"); + for (i=0; i < IP2_MAX_PORTS; i++) { + if (len > LIMIT) + break; + pCh = DevTable[i]; + if (pCh) { + tty = pCh->pTTY; + if (tty && tty->count) { + len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags, + tty->termios->c_cflag,tty->termios->c_iflag); + + len += sprintf(buf+len,FMTLIN2, + pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); + len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room); + } + } + } + return len; +} + +/* + * This is the handler for /proc/tty/driver/ip2 + * + * This stretch of code has been largely plagerized from at least three + * different sources including ip2mkdev.c and a couple of other drivers. + * The bugs are all mine. :-) =mhw= + */ +static int ip2_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int i, j, box; + int len = 0; + int boxes = 0; + int ports = 0; + int tports = 0; + off_t begin = 0; + i2eBordStrPtr pB; + + len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion ); + len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", + IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, + IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + /* This need to be reset for a board by board count... */ + boxes = 0; + pB = i2BoardPtrTable[i]; + if( pB ) { + switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) + { + case POR_ID_FIIEX: + len += sprintf( page+len, "Board %d: EX ports=", i ); + for( box = 0; box < ABS_MAX_BOXES; ++box ) + { + ports = 0; + + if( pB->i2eChannelMap[box] != 0 ) ++boxes; + for( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if( pB->i2eChannelMap[box] & 1<< j ) { + ++ports; + } + } + len += sprintf( page+len, "%d,", ports ); + tports += ports; + } + + --len; /* Backup over that last comma */ + + len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 ); + break; + + case POR_ID_II_4: + len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i ); + tports = ports = 4; + break; + + case POR_ID_II_8: + len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i ); + tports = ports = 8; + break; + + case POR_ID_II_8R: + len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i ); + tports = ports = 8; + break; + + default: + len += sprintf(page+len, "Board %d: unknown", i ); + /* Don't try and probe for minor numbers */ + tports = ports = 0; + } + + } else { + /* Don't try and probe for minor numbers */ + len += sprintf(page+len, "Board %d: vacant", i ); + tports = ports = 0; + } + + if( tports ) { + len += sprintf(page+len, " minors=" ); + + for ( box = 0; box < ABS_MAX_BOXES; ++box ) + { + for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if ( pB->i2eChannelMap[box] & (1 << j) ) + { + len += sprintf (page+len,"%d,", + j + ABS_BIGGEST_BOX * + (box+i*ABS_MAX_BOXES)); + } + } + } + + page[ len - 1 ] = '\n'; /* Overwrite that last comma */ + } else { + len += sprintf (page+len,"\n" ); + } + + if (len+begin > off+count) + break; + if (len+begin < off) { + begin += len; + len = 0; + } + } + + if (i >= IP2_MAX_BOARDS) + *eof = 1; + if (off >= len+begin) + return 0; + + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); + } + +/******************************************************************************/ +/* Function: ip2trace() */ +/* Parameters: Value to add to trace buffer */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +#ifdef IP2DEBUG_TRACE +void +ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) +{ + long flags; + unsigned long *pCode = &codes; + union ip2breadcrumb bc; + i2ChanStrPtr pCh; + + + tracebuf[tracestuff++] = jiffies; + if ( tracestuff == TRACEMAX ) { + tracestuff = 0; + } + if ( tracestuff == tracestrip ) { + if ( ++tracestrip == TRACEMAX ) { + tracestrip = 0; + } + ++tracewrap; + } + + bc.hdr.port = 0xff & pn; + bc.hdr.cat = cat; + bc.hdr.codes = (unsigned char)( codes & 0xff ); + bc.hdr.label = label; + tracebuf[tracestuff++] = bc.value; + + for (;;) { + if ( tracestuff == TRACEMAX ) { + tracestuff = 0; + } + if ( tracestuff == tracestrip ) { + if ( ++tracestrip == TRACEMAX ) { + tracestrip = 0; + } + ++tracewrap; + } + + if ( !codes-- ) + break; + + tracebuf[tracestuff++] = *++pCode; + } +} +#endif + + +MODULE_LICENSE("GPL"); |