diff options
Diffstat (limited to 'drivers/char/rio/riointr.c')
| -rw-r--r-- | drivers/char/rio/riointr.c | 951 |
1 files changed, 951 insertions, 0 deletions
diff --git a/drivers/char/rio/riointr.c b/drivers/char/rio/riointr.c new file mode 100644 index 000000000000..e42e7b50bf6b --- /dev/null +++ b/drivers/char/rio/riointr.c @@ -0,0 +1,951 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : riointr.c +** SID : 1.2 +** Last Modified : 11/6/98 10:33:44 +** Retrieved : 11/6/98 10:33:49 +** +** ident @(#)riointr.c 1.2 +** +** ----------------------------------------------------------------------------- +*/ +#ifdef SCCS_LABELS +static char *_riointr_c_sccs_ = "@(#)riointr.c 1.2"; +#endif + + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/string.h> +#include <asm/semaphore.h> +#include <asm/uaccess.h> + +#include <linux/termios.h> +#include <linux/serial.h> + +#include <linux/generic_serial.h> + +#include <linux/delay.h> + +#include "linux_compat.h" +#include "rio_linux.h" +#include "typdef.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "top.h" +#include "cmdpkt.h" +#include "map.h" +#include "riotypes.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "error.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "control.h" +#include "cirrus.h" +#include "rioioctl.h" + + +static void RIOReceive(struct rio_info *, struct Port *); + + +static char *firstchars (char *p, int nch) +{ + static char buf[2][128]; + static int t=0; + t = ! t; + memcpy (buf[t], p, nch); + buf[t][nch] = 0; + return buf[t]; +} + + +#define INCR( P, I ) ((P) = (((P)+(I)) & p->RIOBufferMask)) +/* Enable and start the transmission of packets */ +void +RIOTxEnable(en) +char * en; +{ + struct Port * PortP; + struct rio_info *p; + struct tty_struct* tty; + int c; + struct PKT * PacketP; + unsigned long flags; + + PortP = (struct Port *)en; + p = (struct rio_info *)PortP->p; + tty = PortP->gs.tty; + + + rio_dprintk (RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", + PortP->PortNum, PortP->gs.xmit_cnt); + + if (!PortP->gs.xmit_cnt) return; + + + /* This routine is an order of magnitude simpler than the specialix + version. One of the disadvantages is that this version will send + an incomplete packet (usually 64 bytes instead of 72) once for + every 4k worth of data. Let's just say that this won't influence + performance significantly..... */ + + rio_spin_lock_irqsave(&PortP->portSem, flags); + + while (can_add_transmit( &PacketP, PortP )) { + c = PortP->gs.xmit_cnt; + if (c > PKT_MAX_DATA_LEN) c = PKT_MAX_DATA_LEN; + + /* Don't copy past the end of the source buffer */ + if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail) + c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail; + + { int t; + t = (c > 10)?10:c; + + rio_dprintk (RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", + PortP->PortNum, c, + firstchars (PortP->gs.xmit_buf + PortP->gs.xmit_tail , t), + firstchars (PortP->gs.xmit_buf + PortP->gs.xmit_tail + c-t, t)); + } + /* If for one reason or another, we can't copy more data, + we're done! */ + if (c == 0) break; + + rio_memcpy_toio (PortP->HostP->Caddr, (caddr_t)PacketP->data, + PortP->gs.xmit_buf + PortP->gs.xmit_tail, c); + /* udelay (1); */ + + writeb (c, &(PacketP->len)); + if (!( PortP->State & RIO_DELETED ) ) { + add_transmit ( PortP ); + /* + ** Count chars tx'd for port statistics reporting + */ + if ( PortP->statsGather ) + PortP->txchars += c; + } + PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE-1); + PortP->gs.xmit_cnt -= c; + } + + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + + if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2*PKT_MAX_DATA_LEN)) { + rio_dprintk (RIO_DEBUG_INTR, "Waking up.... ldisc:%d (%d/%d)....", + (int)(PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)), + PortP->gs.wakeup_chars, PortP->gs.xmit_cnt); + if ((PortP->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + PortP->gs.tty->ldisc.write_wakeup) + (PortP->gs.tty->ldisc.write_wakeup)(PortP->gs.tty); + rio_dprintk (RIO_DEBUG_INTR, "(%d/%d)\n", + PortP->gs.wakeup_chars, PortP->gs.xmit_cnt); + wake_up_interruptible(&PortP->gs.tty->write_wait); + } + +} + + +/* +** RIO Host Service routine. Does all the work traditionally associated with an +** interrupt. +*/ +static int RupIntr; +static int RxIntr; +static int TxIntr; +void +RIOServiceHost(p, HostP, From) +struct rio_info * p; +struct Host *HostP; +int From; +{ + rio_spin_lock (&HostP->HostLock); + if ( (HostP->Flags & RUN_STATE) != RC_RUNNING ) { + static int t =0; + rio_spin_unlock (&HostP->HostLock); + if ((t++ % 200) == 0) + rio_dprintk (RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int)HostP->Flags); + return; + } + rio_spin_unlock (&HostP->HostLock); + + if ( RWORD( HostP->ParmMapP->rup_intr ) ) { + WWORD( HostP->ParmMapP->rup_intr , 0 ); + p->RIORupCount++; + RupIntr++; + rio_dprintk (RIO_DEBUG_INTR, "rio: RUP interrupt on host %d\n", HostP-p->RIOHosts); + RIOPollHostCommands(p, HostP ); + } + + if ( RWORD( HostP->ParmMapP->rx_intr ) ) { + int port; + + WWORD( HostP->ParmMapP->rx_intr , 0 ); + p->RIORxCount++; + RxIntr++; + + rio_dprintk (RIO_DEBUG_INTR, "rio: RX interrupt on host %d\n", HostP-p->RIOHosts); + /* + ** Loop through every port. If the port is mapped into + ** the system ( i.e. has /dev/ttyXXXX associated ) then it is + ** worth checking. If the port isn't open, grab any packets + ** hanging on its receive queue and stuff them on the free + ** list; check for commands on the way. + */ + for ( port=p->RIOFirstPortsBooted; + port<p->RIOLastPortsBooted+PORTS_PER_RTA; port++ ) { + struct Port *PortP = p->RIOPortp[port]; + struct tty_struct *ttyP; + struct PKT *PacketP; + + /* + ** not mapped in - most of the RIOPortp[] information + ** has not been set up! + ** Optimise: ports come in bundles of eight. + */ + if ( !PortP->Mapped ) { + port += 7; + continue; /* with the next port */ + } + + /* + ** If the host board isn't THIS host board, check the next one. + ** optimise: ports come in bundles of eight. + */ + if ( PortP->HostP != HostP ) { + port += 7; + continue; + } + + /* + ** Let us see - is the port open? If not, then don't service it. + */ + if ( !( PortP->PortState & PORT_ISOPEN ) ) { + continue; + } + + /* + ** find corresponding tty structure. The process of mapping + ** the ports puts these here. + */ + ttyP = PortP->gs.tty; + + /* + ** Lock the port before we begin working on it. + */ + rio_spin_lock(&PortP->portSem); + + /* + ** Process received data if there is any. + */ + if ( can_remove_receive( &PacketP, PortP ) ) + RIOReceive(p, PortP); + + /* + ** If there is no data left to be read from the port, and + ** it's handshake bit is set, then we must clear the handshake, + ** so that that downstream RTA is re-enabled. + */ + if ( !can_remove_receive( &PacketP, PortP ) && + ( RWORD( PortP->PhbP->handshake )==PHB_HANDSHAKE_SET ) ) { + /* + ** MAGIC! ( Basically, handshake the RX buffer, so that + ** the RTAs upstream can be re-enabled. ) + */ + rio_dprintk (RIO_DEBUG_INTR, "Set RX handshake bit\n"); + WWORD( PortP->PhbP->handshake, + PHB_HANDSHAKE_SET|PHB_HANDSHAKE_RESET ); + } + rio_spin_unlock(&PortP->portSem); + } + } + + if ( RWORD( HostP->ParmMapP->tx_intr ) ) { + int port; + + WWORD( HostP->ParmMapP->tx_intr , 0); + + p->RIOTxCount++; + TxIntr++; + rio_dprintk (RIO_DEBUG_INTR, "rio: TX interrupt on host %d\n", HostP-p->RIOHosts); + + /* + ** Loop through every port. + ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX + ** associated ) then it is worth checking. + */ + for ( port=p->RIOFirstPortsBooted; + port<p->RIOLastPortsBooted+PORTS_PER_RTA; port++ ) { + struct Port *PortP = p->RIOPortp[port]; + struct tty_struct *ttyP; + struct PKT *PacketP; + + /* + ** not mapped in - most of the RIOPortp[] information + ** has not been set up! + */ + if ( !PortP->Mapped ) { + port += 7; + continue; /* with the next port */ + } + + /* + ** If the host board isn't running, then its data structures + ** are no use to us - continue quietly. + */ + if ( PortP->HostP != HostP ) { + port += 7; + continue; /* with the next port */ + } + + /* + ** Let us see - is the port open? If not, then don't service it. + */ + if ( !( PortP->PortState & PORT_ISOPEN ) ) { + continue; + } + + rio_dprintk (RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port); + /* + ** Lock the port before we begin working on it. + */ + rio_spin_lock(&PortP->portSem); + + /* + ** If we can't add anything to the transmit queue, then + ** we need do none of this processing. + */ + if ( !can_add_transmit( &PacketP, PortP ) ) { + rio_dprintk (RIO_DEBUG_INTR, "Can't add to port, so skipping.\n"); + rio_spin_unlock(&PortP->portSem); + continue; + } + + /* + ** find corresponding tty structure. The process of mapping + ** the ports puts these here. + */ + ttyP = PortP->gs.tty; + /* If ttyP is NULL, the port is getting closed. Forget about it. */ + if (!ttyP) { + rio_dprintk (RIO_DEBUG_INTR, "no tty, so skipping.\n"); + rio_spin_unlock(&PortP->portSem); + continue; + } + /* + ** If there is more room available we start up the transmit + ** data process again. This can be direct I/O, if the cookmode + ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the + ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch + ** characters via the line discipline. We must always call + ** the line discipline, + ** so that user input characters can be echoed correctly. + ** + ** ++++ Update +++++ + ** With the advent of double buffering, we now see if + ** TxBufferOut-In is non-zero. If so, then we copy a packet + ** to the output place, and set it going. If this empties + ** the buffer, then we must issue a wakeup( ) on OUT. + ** If it frees space in the buffer then we must issue + ** a wakeup( ) on IN. + ** + ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we + ** have to send a WFLUSH command down the PHB, to mark the + ** end point of a WFLUSH. We also need to clear out any + ** data from the double buffer! ( note that WflushFlag is a + ** *count* of the number of WFLUSH commands outstanding! ) + ** + ** ++++ And there's more! + ** If an RTA is powered off, then on again, and rebooted, + ** whilst it has ports open, then we need to re-open the ports. + ** ( reasonable enough ). We can't do this when we spot the + ** re-boot, in interrupt time, because the queue is probably + ** full. So, when we come in here, we need to test if any + ** ports are in this condition, and re-open the port before + ** we try to send any more data to it. Now, the re-booted + ** RTA will be discarding packets from the PHB until it + ** receives this open packet, but don't worry tooo much + ** about that. The one thing that is interesting is the + ** combination of this effect and the WFLUSH effect! + */ + /* For now don't handle RTA reboots. -- REW. + Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */ + if ( PortP->MagicFlags ) { +#if 1 + if ( PortP->MagicFlags & MAGIC_REBOOT ) { + /* + ** well, the RTA has been rebooted, and there is room + ** on its queue to add the open packet that is required. + ** + ** The messy part of this line is trying to decide if + ** we need to call the Param function as a tty or as + ** a modem. + ** DONT USE CLOCAL AS A TEST FOR THIS! + ** + ** If we can't param the port, then move on to the + ** next port. + */ + PortP->InUse = NOT_INUSE; + + rio_spin_unlock(&PortP->portSem); + if ( RIOParam(PortP, OPEN, ((PortP->Cor2Copy & + (COR2_RTSFLOW|COR2_CTSFLOW ) )== + (COR2_RTSFLOW|COR2_CTSFLOW ) ) ? + TRUE : FALSE, DONT_SLEEP ) == RIO_FAIL ) { + continue; /* with next port */ + } + rio_spin_lock(&PortP->portSem); + PortP->MagicFlags &= ~MAGIC_REBOOT; + } +#endif + + /* + ** As mentioned above, this is a tacky hack to cope + ** with WFLUSH + */ + if ( PortP->WflushFlag ) { + rio_dprintk (RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n"); + + if ( PortP->InUse ) + rio_dprintk (RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n"); + } + + while ( PortP->WflushFlag && + can_add_transmit( &PacketP, PortP ) && + ( PortP->InUse == NOT_INUSE ) ) { + int p; + struct PktCmd *PktCmdP; + + rio_dprintk (RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n"); + /* + ** make it look just like a WFLUSH command + */ + PktCmdP = ( struct PktCmd * )&PacketP->data[0]; + + WBYTE( PktCmdP->Command , WFLUSH ); + + p = PortP->HostPort % ( ushort )PORTS_PER_RTA; + + /* + ** If second block of ports for 16 port RTA, add 8 + ** to index 8-15. + */ + if ( PortP->SecondBlock ) + p += PORTS_PER_RTA; + + WBYTE( PktCmdP->PhbNum, p ); + + /* + ** to make debuggery easier + */ + WBYTE( PacketP->data[ 2], 'W' ); + WBYTE( PacketP->data[ 3], 'F' ); + WBYTE( PacketP->data[ 4], 'L' ); + WBYTE( PacketP->data[ 5], 'U' ); + WBYTE( PacketP->data[ 6], 'S' ); + WBYTE( PacketP->data[ 7], 'H' ); + WBYTE( PacketP->data[ 8], ' ' ); + WBYTE( PacketP->data[ 9], '0'+PortP->WflushFlag ); + WBYTE( PacketP->data[10], ' ' ); + WBYTE( PacketP->data[11], ' ' ); + WBYTE( PacketP->data[12], '\0' ); + + /* + ** its two bytes long! + */ + WBYTE( PacketP->len , PKT_CMD_BIT | 2 ); + + /* + ** queue it! + */ + if ( !( PortP->State & RIO_DELETED ) ) { + add_transmit( PortP ); + /* + ** Count chars tx'd for port statistics reporting + */ + if ( PortP->statsGather ) + PortP->txchars += 2; + } + + if ( --( PortP->WflushFlag ) == 0 ) { + PortP->MagicFlags &= ~MAGIC_FLUSH; + } + + rio_dprintk (RIO_DEBUG_INTR, "Wflush count now stands at %d\n", + PortP->WflushFlag); + } + if ( PortP->MagicFlags & MORE_OUTPUT_EYGOR ) { + if ( PortP->MagicFlags & MAGIC_FLUSH ) { + PortP->MagicFlags |= MORE_OUTPUT_EYGOR; + } + else { + if ( !can_add_transmit( &PacketP, PortP ) ) { + rio_spin_unlock(&PortP->portSem); + continue; + } + rio_spin_unlock(&PortP->portSem); + RIOTxEnable((char *)PortP); + rio_spin_lock(&PortP->portSem); + PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR; + } + } + } + + + /* + ** If we can't add anything to the transmit queue, then + ** we need do none of the remaining processing. + */ + if (!can_add_transmit( &PacketP, PortP ) ) { + rio_spin_unlock(&PortP->portSem); + continue; + } + + rio_spin_unlock(&PortP->portSem); + RIOTxEnable((char *)PortP); + } + } +} + +/* +** Routine for handling received data for clist drivers. +** NB: Called with the tty locked. The spl from the lockb( ) is passed. +** we return the ttySpl level that we re-locked at. +*/ +static void +RIOReceive(p, PortP) +struct rio_info * p; +struct Port * PortP; +{ + struct tty_struct *TtyP; + register ushort transCount; + struct PKT *PacketP; + register uint DataCnt; + uchar * ptr; + int copied =0; + + static int intCount, RxIntCnt; + + /* + ** The receive data process is to remove packets from the + ** PHB until there aren't any more or the current cblock + ** is full. When this occurs, there will be some left over + ** data in the packet, that we must do something with. + ** As we haven't unhooked the packet from the read list + ** yet, we can just leave the packet there, having first + ** made a note of how far we got. This means that we need + ** a pointer per port saying where we start taking the + ** data from - this will normally be zero, but when we + ** run out of space it will be set to the offset of the + ** next byte to copy from the packet data area. The packet + ** length field is decremented by the number of bytes that + ** we succesfully removed from the packet. When this reaches + ** zero, we reset the offset pointer to be zero, and free + ** the packet from the front of the queue. + */ + + intCount++; + + TtyP = PortP->gs.tty; + if (!TtyP) { + rio_dprintk (RIO_DEBUG_INTR, "RIOReceive: tty is null. \n"); + return; + } + + if (PortP->State & RIO_THROTTLE_RX) { + rio_dprintk (RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n"); + return; + } + + if ( PortP->State & RIO_DELETED ) + { + while ( can_remove_receive( &PacketP, PortP ) ) + { + remove_receive( PortP ); + put_free_end( PortP->HostP, PacketP ); + } + } + else + { + /* + ** loop, just so long as: + ** i ) there's some data ( i.e. can_remove_receive ) + ** ii ) we haven't been blocked + ** iii ) there's somewhere to put the data + ** iv ) we haven't outstayed our welcome + */ + transCount = 1; + while ( can_remove_receive(&PacketP, PortP) + && transCount) + { +#ifdef STATS + PortP->Stat.RxIntCnt++; +#endif /* STATS */ + RxIntCnt++; + + /* + ** check that it is not a command! + */ + if ( PacketP->len & PKT_CMD_BIT ) { + rio_dprintk (RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n"); + /* rio_dprint(RIO_DEBUG_INTR, (" sysport = %d\n", p->RIOPortp->PortNum)); */ + rio_dprintk (RIO_DEBUG_INTR, " dest_unit = %d\n", PacketP->dest_unit); + rio_dprintk (RIO_DEBUG_INTR, " dest_port = %d\n", PacketP->dest_port); + rio_dprintk (RIO_DEBUG_INTR, " src_unit = %d\n", PacketP->src_unit); + rio_dprintk (RIO_DEBUG_INTR, " src_port = %d\n", PacketP->src_port); + rio_dprintk (RIO_DEBUG_INTR, " len = %d\n", PacketP->len); + rio_dprintk (RIO_DEBUG_INTR, " control = %d\n", PacketP->control); + rio_dprintk (RIO_DEBUG_INTR, " csum = %d\n", PacketP->csum); + rio_dprintk (RIO_DEBUG_INTR, " data bytes: "); + for ( DataCnt=0; DataCnt<PKT_MAX_DATA_LEN; DataCnt++ ) + rio_dprintk (RIO_DEBUG_INTR, "%d\n", PacketP->data[DataCnt]); + remove_receive( PortP ); + put_free_end( PortP->HostP, PacketP ); + continue; /* with next packet */ + } + + /* + ** How many characters can we move 'upstream' ? + ** + ** Determine the minimum of the amount of data + ** available and the amount of space in which to + ** put it. + ** + ** 1. Get the packet length by masking 'len' + ** for only the length bits. + ** 2. Available space is [buffer size] - [space used] + ** + ** Transfer count is the minimum of packet length + ** and available space. + */ + + transCount = min_t(unsigned int, PacketP->len & PKT_LEN_MASK, + TTY_FLIPBUF_SIZE - TtyP->flip.count); + rio_dprintk (RIO_DEBUG_REC, "port %d: Copy %d bytes\n", + PortP->PortNum, transCount); + /* + ** To use the following 'kkprintfs' for debugging - change the '#undef' + ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the + ** driver). + */ +#undef ___DEBUG_IT___ +#ifdef ___DEBUG_IT___ + kkprintf("I:%d R:%d P:%d Q:%d C:%d F:%x ", + intCount, + RxIntCnt, + PortP->PortNum, + TtyP->rxqueue.count, + transCount, + TtyP->flags ); +#endif + ptr = (uchar *) PacketP->data + PortP->RxDataStart; + + rio_memcpy_fromio (TtyP->flip.char_buf_ptr, ptr, transCount); + memset(TtyP->flip.flag_buf_ptr, TTY_NORMAL, transCount); + +#ifdef STATS + /* + ** keep a count for statistical purposes + */ + PortP->Stat.RxCharCnt += transCount; +#endif + PortP->RxDataStart += transCount; + PacketP->len -= transCount; + copied += transCount; + TtyP->flip.count += transCount; + TtyP->flip.char_buf_ptr += transCount; + TtyP->flip.flag_buf_ptr += transCount; + + +#ifdef ___DEBUG_IT___ + kkprintf("T:%d L:%d\n", DataCnt, PacketP->len ); +#endif + + if ( PacketP->len == 0 ) + { + /* + ** If we have emptied the packet, then we can + ** free it, and reset the start pointer for + ** the next packet. + */ + remove_receive( PortP ); + put_free_end( PortP->HostP, PacketP ); + PortP->RxDataStart = 0; +#ifdef STATS + /* + ** more lies ( oops, I mean statistics ) + */ + PortP->Stat.RxPktCnt++; +#endif /* STATS */ + } + } + } + if (copied) { + rio_dprintk (RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied); + tty_flip_buffer_push (TtyP); + } + + return; +} + +#ifdef FUTURE_RELEASE +/* +** The proc routine called by the line discipline to do the work for it. +** The proc routine works hand in hand with the interrupt routine. +*/ +int +riotproc(p, tp, cmd, port) +struct rio_info * p; +register struct ttystatics *tp; +int cmd; +int port; +{ + register struct Port *PortP; + int SysPort; + struct PKT *PacketP; + + SysPort = port; /* Believe me, it works. */ + + if ( SysPort < 0 || SysPort >= RIO_PORTS ) { + rio_dprintk (RIO_DEBUG_INTR, "Illegal port %d derived from TTY in riotproc()\n",SysPort); + return 0; + } + PortP = p->RIOPortp[SysPort]; + + if ((uint)PortP->PhbP < (uint)PortP->Caddr || + (uint)PortP->PhbP >= (uint)PortP->Caddr+SIXTY_FOUR_K ) { + rio_dprintk (RIO_DEBUG_INTR, "RIO: NULL or BAD PhbP on sys port %d in proc routine\n", + SysPort); + rio_dprintk (RIO_DEBUG_INTR, " PortP = 0x%x\n",PortP); + rio_dprintk (RIO_DEBUG_INTR, " PortP->PhbP = 0x%x\n",PortP->PhbP); + rio_dprintk (RIO_DEBUG_INTR, " PortP->Caddr = 0x%x\n",PortP->PhbP); + rio_dprintk (RIO_DEBUG_INTR, " PortP->HostPort = 0x%x\n",PortP->HostPort); + return 0; + } + + switch(cmd) { + case T_WFLUSH: + rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH\n"); + /* + ** Because of the spooky way the RIO works, we don't need + ** to issue a flush command on any of the SET*F commands, + ** as that causes trouble with getty and login, which issue + ** these commands to incur a READ flush, and rely on the fact + ** that the line discipline does a wait for drain for them. + ** As the rio doesn't wait for drain, the write flush would + ** destroy the Password: prompt. This isn't very friendly, so + ** here we only issue a WFLUSH command if we are in the interrupt + ** routine, or we aren't executing a SET*F command. + */ + if ( PortP->HostP->InIntr || !PortP->FlushCmdBodge ) { + /* + ** form a wflush packet - 1 byte long, no data + */ + if ( PortP->State & RIO_DELETED ) { + rio_dprintk (RIO_DEBUG_INTR, "WFLUSH on deleted RTA\n"); + } + else { + if ( RIOPreemptiveCmd(p, PortP, WFLUSH ) == RIO_FAIL ) { + rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command failed\n"); + } + else + rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command\n"); + } + /* + ** WFLUSH operation - flush the data! + */ + PortP->TxBufferIn = PortP->TxBufferOut = 0; + } + else { + rio_dprintk (RIO_DEBUG_INTR, "T_WFLUSH Command ignored\n"); + } + /* + ** sort out the line discipline + */ + if (PortP->CookMode == COOK_WELL) + goto start; + break; + + case T_RESUME: + rio_dprintk (RIO_DEBUG_INTR, "T_RESUME\n"); + /* + ** send pre-emptive resume packet + */ + if ( PortP->State & RIO_DELETED ) { + rio_dprintk (RIO_DEBUG_INTR, "RESUME on deleted RTA\n"); + } + else { + if ( RIOPreemptiveCmd(p, PortP, RESUME ) == RIO_FAIL ) { + rio_dprintk (RIO_DEBUG_INTR, "T_RESUME Command failed\n"); + } + } + /* + ** and re-start the sender software! + */ + if (PortP->CookMode == COOK_WELL) + goto start; + break; + + case T_TIME: + rio_dprintk (RIO_DEBUG_INTR, "T_TIME\n"); + /* + ** T_TIME is called when xDLY is set in oflags and + ** the line discipline timeout has expired. It's + ** function in life is to clear the TIMEOUT flag + ** and to re-start output to the port. + */ + /* + ** Fall through and re-start output + */ + case T_OUTPUT: +start: + if ( PortP->MagicFlags & MAGIC_FLUSH ) { + PortP->MagicFlags |= MORE_OUTPUT_EYGOR; + return 0; + } + RIOTxEnable((char *)PortP); + PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR; + /*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"T_OUTPUT finished\n");*/ + break; + + case T_SUSPEND: + rio_dprintk (RIO_DEBUG_INTR, "T_SUSPEND\n"); + /* + ** send a suspend pre-emptive packet. + */ + if ( PortP->State & RIO_DELETED ) { + rio_dprintk (RIO_DEBUG_INTR, "SUSPEND deleted RTA\n"); + } + else { + if ( RIOPreemptiveCmd(p, PortP, SUSPEND ) == RIO_FAIL ) { + rio_dprintk (RIO_DEBUG_INTR, "T_SUSPEND Command failed\n"); + } + } + /* + ** done! + */ + break; + + case T_BLOCK: + rio_dprintk (RIO_DEBUG_INTR, "T_BLOCK\n"); + break; + + case T_RFLUSH: + rio_dprintk (RIO_DEBUG_INTR, "T_RFLUSH\n"); + if ( PortP->State & RIO_DELETED ) { + rio_dprintk (RIO_DEBUG_INTR, "RFLUSH on deleted RTA\n"); + PortP->RxDataStart = 0; + } + else { + if ( RIOPreemptiveCmd( p, PortP, RFLUSH ) == RIO_FAIL ) { + rio_dprintk (RIO_DEBUG_INTR, "T_RFLUSH Command failed\n"); + return 0; + } + PortP->RxDataStart = 0; + while ( can_remove_receive(&PacketP, PortP) ) { + remove_receive(PortP); + ShowPacket(DBG_PROC, PacketP ); + put_free_end(PortP->HostP, PacketP ); + } + if ( PortP->PhbP->handshake == PHB_HANDSHAKE_SET ) { + /* + ** MAGIC! + */ + rio_dprintk (RIO_DEBUG_INTR, "Set receive handshake bit\n"); + PortP->PhbP->handshake |= PHB_HANDSHAKE_RESET; + } + } + break; + /* FALLTHROUGH */ + case T_UNBLOCK: + rio_dprintk (RIO_DEBUG_INTR, "T_UNBLOCK\n"); + /* + ** If there is any data to receive set a timeout to service it. + */ + RIOReceive(p, PortP); + break; + + case T_BREAK: + rio_dprintk (RIO_DEBUG_INTR, "T_BREAK\n"); + /* + ** Send a break command. For Sys V + ** this is a timed break, so we + ** send a SBREAK[time] packet + */ + /* + ** Build a BREAK command + */ + if ( PortP->State & RIO_DELETED ) { + rio_dprintk (RIO_DEBUG_INTR, "BREAK on deleted RTA\n"); + } + else { + if (RIOShortCommand(PortP,SBREAK,2, + p->RIOConf.BreakInterval)==RIO_FAIL) { + rio_dprintk (RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n"); + } + } + + /* + ** done! + */ + break; + + case T_INPUT: + rio_dprintk (RIO_DEBUG_INTR, "Proc T_INPUT called - I don't know what to do!\n"); + break; + case T_PARM: + rio_dprintk (RIO_DEBUG_INTR, "Proc T_PARM called - I don't know what to do!\n"); + break; + + case T_SWTCH: + rio_dprintk (RIO_DEBUG_INTR, "Proc T_SWTCH called - I don't know what to do!\n"); + break; + + default: + rio_dprintk (RIO_DEBUG_INTR, "Proc UNKNOWN command %d\n",cmd); + } + /* + ** T_OUTPUT returns without passing through this point! + */ + /*rio_dprint(RIO_DEBUG_INTR, PortP,DBG_PROC,"riotproc done\n");*/ + return(0); +} +#endif |