diff options
Diffstat (limited to 'drivers/char/rio/rioroute.c')
| -rw-r--r-- | drivers/char/rio/rioroute.c | 1572 |
1 files changed, 713 insertions, 859 deletions
diff --git a/drivers/char/rio/rioroute.c b/drivers/char/rio/rioroute.c index e9564c9fb37c..0f4cd33ba641 100644 --- a/drivers/char/rio/rioroute.c +++ b/drivers/char/rio/rioroute.c @@ -93,625 +93,517 @@ static void RIOConCon(struct rio_info *, struct Host *, uint, uint, uint, uint, ** Incoming on the ROUTE_RUP ** I wrote this while I was tired. Forgive me. */ -int RIORouteRup( struct rio_info *p, uint Rup, struct Host *HostP, PKT *PacketP ) +int RIORouteRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * PacketP) { - struct PktCmd *PktCmdP = (struct PktCmd *)PacketP->data; - struct PktCmd_M *PktReplyP; - struct CmdBlk *CmdBlkP; - struct Port *PortP; - struct Map *MapP; - struct Top *TopP; - int ThisLink, ThisLinkMin, ThisLinkMax; - int port; - int Mod, Mod1, Mod2; - ushort RtaType; - uint RtaUniq; - uint ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */ - uint OldUnit, NewUnit, OldLink, NewLink; - char *MyType, *MyName; - int Lies; - unsigned long flags; + struct PktCmd *PktCmdP = (struct PktCmd *) PacketP->data; + struct PktCmd_M *PktReplyP; + struct CmdBlk *CmdBlkP; + struct Port *PortP; + struct Map *MapP; + struct Top *TopP; + int ThisLink, ThisLinkMin, ThisLinkMax; + int port; + int Mod, Mod1, Mod2; + ushort RtaType; + uint RtaUniq; + uint ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */ + uint OldUnit, NewUnit, OldLink, NewLink; + char *MyType, *MyName; + int Lies; + unsigned long flags; #ifdef STACK - RIOStackCheck("RIORouteRup"); + RIOStackCheck("RIORouteRup"); #endif #ifdef CHECK - CheckPacketP(PacketP); - CheckHostP(HostP); - CheckRup(Rup); - CheckHost(Host); + CheckPacketP(PacketP); + CheckHostP(HostP); + CheckRup(Rup); + CheckHost(Host); #endif - /* - ** Is this unit telling us it's current link topology? - */ - if ( RBYTE(PktCmdP->Command) == ROUTE_TOPOLOGY ) - { - MapP = HostP->Mapping; - - /* - ** The packet can be sent either by the host or by an RTA. - ** If it comes from the host, then we need to fill in the - ** Topology array in the host structure. If it came in - ** from an RTA then we need to fill in the Mapping structure's - ** Topology array for the unit. - */ - if ( Rup >= (ushort)MAX_RUP ) - { - ThisUnit = HOST_ID; - TopP = HostP->Topology; - MyType = "Host"; - MyName = HostP->Name; - ThisLinkMin = ThisLinkMax = Rup - MAX_RUP; - } - else - { - ThisUnit = Rup+1; - TopP = HostP->Mapping[Rup].Topology; - MyType = "RTA"; - MyName = HostP->Mapping[Rup].Name; - ThisLinkMin = 0; - ThisLinkMax = LINKS_PER_UNIT - 1; - } - - /* - ** Lies will not be tolerated. - ** If any pair of links claim to be connected to the same - ** place, then ignore this packet completely. - */ - Lies = 0; - for ( ThisLink=ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) - { - /* - ** it won't lie about network interconnect, total disconnects - ** and no-IDs. (or at least, it doesn't *matter* if it does) - */ - if ( RBYTE(PktCmdP->RouteTopology[ThisLink].Unit) > (ushort)MAX_RUP ) - continue; - - for ( NewLink=ThisLinkMin; NewLink < ThisLink; NewLink++ ) - { - if ( (RBYTE(PktCmdP->RouteTopology[ThisLink].Unit) == - RBYTE(PktCmdP->RouteTopology[NewLink].Unit)) && - (RBYTE(PktCmdP->RouteTopology[ThisLink].Link) == - RBYTE(PktCmdP->RouteTopology[NewLink].Link)) ) - { - Lies++; - } - } - } - - if ( Lies ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n",Lies); - rio_dprintk (RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n", - RBYTE(PktCmdP->RouteTopology[0].Unit), - 'A'+RBYTE(PktCmdP->RouteTopology[0].Link), - RBYTE(PktCmdP->RouteTopology[1].Unit), - 'A'+RBYTE(PktCmdP->RouteTopology[1].Link), - RBYTE(PktCmdP->RouteTopology[2].Unit), - 'A'+RBYTE(PktCmdP->RouteTopology[2].Link), - RBYTE(PktCmdP->RouteTopology[3].Unit), - 'A'+RBYTE(PktCmdP->RouteTopology[3].Link)); - return TRUE; - } - - /* - ** now, process each link. - */ - for ( ThisLink=ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) - { - /* - ** this is what it was connected to - */ - OldUnit = TopP[ThisLink].Unit; - OldLink = TopP[ThisLink].Link; - - /* - ** this is what it is now connected to - */ - NewUnit = RBYTE(PktCmdP->RouteTopology[ThisLink].Unit); - NewLink = RBYTE(PktCmdP->RouteTopology[ThisLink].Link); - - if ( OldUnit != NewUnit || OldLink != NewLink ) - { /* - ** something has changed! - */ - - if ( NewUnit > MAX_RUP && - NewUnit != ROUTE_DISCONNECT && - NewUnit != ROUTE_NO_ID && - NewUnit != ROUTE_INTERCONNECT ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", - MyType, - MyName, - NewUnit, - NewLink); - } - else - { - /* - ** put the new values in - */ - TopP[ThisLink].Unit = NewUnit; - TopP[ThisLink].Link = NewLink; - - RIOSetChange(p); - - if ( OldUnit <= MAX_RUP ) - { - /* - ** If something has become bust, then re-enable them messages - */ - if (! p->RIONoMessage) - RIOConCon(p,HostP,ThisUnit,ThisLink,OldUnit,OldLink,DISCONNECT); - } - - if ( ( NewUnit <= MAX_RUP ) && !p->RIONoMessage ) - RIOConCon(p,HostP,ThisUnit,ThisLink,NewUnit,NewLink,CONNECT); - - if ( NewUnit == ROUTE_NO_ID ) - rio_dprintk (RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", - MyType,MyName,'A'+ThisLink); - - if ( NewUnit == ROUTE_INTERCONNECT ) - { - if (! p->RIONoMessage) - cprintf("%s '%s' (%c) is connected to another network.\n", MyType,MyName,'A'+ThisLink); - } - - /* - ** perform an update for 'the other end', so that these messages - ** only appears once. Only disconnect the other end if it is pointing - ** at us! - */ - if ( OldUnit == HOST_ID ) - { - if ( HostP->Topology[OldLink].Unit == ThisUnit && - HostP->Topology[OldLink].Link == ThisLink ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink+'A'); - HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT; - HostP->Topology[OldLink].Link = NO_LINK; - } - else - { - rio_dprintk (RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", - OldLink+'A',HostP->Mapping[ThisUnit-1].Name,ThisLink+'A'); - } - } - else if ( OldUnit <= MAX_RUP ) - { - if ( HostP->Mapping[OldUnit-1].Topology[OldLink].Unit == ThisUnit && - HostP->Mapping[OldUnit-1].Topology[OldLink].Link == ThisLink ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", - HostP->Mapping[OldUnit-1].Name,OldLink+'A'); - HostP->Mapping[OldUnit-1].Topology[OldLink].Unit=ROUTE_DISCONNECT; - HostP->Mapping[OldUnit-1].Topology[OldLink].Link=NO_LINK; - } - else - { - rio_dprintk (RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", - HostP->Mapping[OldUnit-1].Name,OldLink+'A', - HostP->Mapping[ThisUnit-1].Name,ThisLink+'A'); - } - } - if ( NewUnit == HOST_ID ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", - NewLink+'A',MyName,ThisLink+'A'); - HostP->Topology[NewLink].Unit = ThisUnit; - HostP->Topology[NewLink].Link = ThisLink; - } - else if ( NewUnit <= MAX_RUP ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", - HostP->Mapping[NewUnit-1].Name,NewLink+'A',MyName,ThisLink+'A'); - HostP->Mapping[NewUnit-1].Topology[NewLink].Unit=ThisUnit; - HostP->Mapping[NewUnit-1].Topology[NewLink].Link=ThisLink; - } + ** Is this unit telling us it's current link topology? + */ + if (RBYTE(PktCmdP->Command) == ROUTE_TOPOLOGY) { + MapP = HostP->Mapping; + + /* + ** The packet can be sent either by the host or by an RTA. + ** If it comes from the host, then we need to fill in the + ** Topology array in the host structure. If it came in + ** from an RTA then we need to fill in the Mapping structure's + ** Topology array for the unit. + */ + if (Rup >= (ushort) MAX_RUP) { + ThisUnit = HOST_ID; + TopP = HostP->Topology; + MyType = "Host"; + MyName = HostP->Name; + ThisLinkMin = ThisLinkMax = Rup - MAX_RUP; + } else { + ThisUnit = Rup + 1; + TopP = HostP->Mapping[Rup].Topology; + MyType = "RTA"; + MyName = HostP->Mapping[Rup].Name; + ThisLinkMin = 0; + ThisLinkMax = LINKS_PER_UNIT - 1; + } + + /* + ** Lies will not be tolerated. + ** If any pair of links claim to be connected to the same + ** place, then ignore this packet completely. + */ + Lies = 0; + for (ThisLink = ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) { + /* + ** it won't lie about network interconnect, total disconnects + ** and no-IDs. (or at least, it doesn't *matter* if it does) + */ + if (RBYTE(PktCmdP->RouteTopology[ThisLink].Unit) > (ushort) MAX_RUP) + continue; + + for (NewLink = ThisLinkMin; NewLink < ThisLink; NewLink++) { + if ((RBYTE(PktCmdP->RouteTopology[ThisLink].Unit) == RBYTE(PktCmdP->RouteTopology[NewLink].Unit)) && (RBYTE(PktCmdP->RouteTopology[ThisLink].Link) == RBYTE(PktCmdP->RouteTopology[NewLink].Link))) { + Lies++; + } + } + } + + if (Lies) { + rio_dprintk(RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n", Lies); + rio_dprintk(RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n", + RBYTE(PktCmdP->RouteTopology[0].Unit), + 'A' + RBYTE(PktCmdP->RouteTopology[0].Link), + RBYTE(PktCmdP->RouteTopology[1].Unit), + 'A' + RBYTE(PktCmdP->RouteTopology[1].Link), RBYTE(PktCmdP->RouteTopology[2].Unit), 'A' + RBYTE(PktCmdP->RouteTopology[2].Link), RBYTE(PktCmdP->RouteTopology[3].Unit), 'A' + RBYTE(PktCmdP->RouteTopology[3].Link)); + return TRUE; + } + + /* + ** now, process each link. + */ + for (ThisLink = ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) { + /* + ** this is what it was connected to + */ + OldUnit = TopP[ThisLink].Unit; + OldLink = TopP[ThisLink].Link; + + /* + ** this is what it is now connected to + */ + NewUnit = RBYTE(PktCmdP->RouteTopology[ThisLink].Unit); + NewLink = RBYTE(PktCmdP->RouteTopology[ThisLink].Link); + + if (OldUnit != NewUnit || OldLink != NewLink) { + /* + ** something has changed! + */ + + if (NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT) { + rio_dprintk(RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink); + } else { + /* + ** put the new values in + */ + TopP[ThisLink].Unit = NewUnit; + TopP[ThisLink].Link = NewLink; + + RIOSetChange(p); + + if (OldUnit <= MAX_RUP) { + /* + ** If something has become bust, then re-enable them messages + */ + if (!p->RIONoMessage) + RIOConCon(p, HostP, ThisUnit, ThisLink, OldUnit, OldLink, DISCONNECT); + } + + if ((NewUnit <= MAX_RUP) && !p->RIONoMessage) + RIOConCon(p, HostP, ThisUnit, ThisLink, NewUnit, NewLink, CONNECT); + + if (NewUnit == ROUTE_NO_ID) + rio_dprintk(RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", MyType, MyName, 'A' + ThisLink); + + if (NewUnit == ROUTE_INTERCONNECT) { + if (!p->RIONoMessage) + cprintf("%s '%s' (%c) is connected to another network.\n", MyType, MyName, 'A' + ThisLink); + } + + /* + ** perform an update for 'the other end', so that these messages + ** only appears once. Only disconnect the other end if it is pointing + ** at us! + */ + if (OldUnit == HOST_ID) { + if (HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink) { + rio_dprintk(RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink + 'A'); + HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT; + HostP->Topology[OldLink].Link = NO_LINK; + } else { + rio_dprintk(RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); + } + } else if (OldUnit <= MAX_RUP) { + if (HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit - 1].Topology[OldLink].Link == ThisLink) { + rio_dprintk(RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A'); + HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit = ROUTE_DISCONNECT; + HostP->Mapping[OldUnit - 1].Topology[OldLink].Link = NO_LINK; + } else { + rio_dprintk(RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A'); + } + } + if (NewUnit == HOST_ID) { + rio_dprintk(RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink + 'A', MyName, ThisLink + 'A'); + HostP->Topology[NewLink].Unit = ThisUnit; + HostP->Topology[NewLink].Link = ThisLink; + } else if (NewUnit <= MAX_RUP) { + rio_dprintk(RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit - 1].Name, NewLink + 'A', MyName, ThisLink + 'A'); + HostP->Mapping[NewUnit - 1].Topology[NewLink].Unit = ThisUnit; + HostP->Mapping[NewUnit - 1].Topology[NewLink].Link = ThisLink; + } + } + RIOSetChange(p); + RIOCheckIsolated(p, HostP, OldUnit); + } + } + return TRUE; } - RIOSetChange(p); - RIOCheckIsolated(p, HostP, OldUnit ); - } - } - return TRUE; - } - - /* - ** The only other command we recognise is a route_request command - */ - if ( RBYTE(PktCmdP->Command) != ROUTE_REQUEST ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %d ROUTE_RUP\n", - RBYTE(PktCmdP->Command),Rup,(int)HostP); - return TRUE; - } - - RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) + - (RBYTE(PktCmdP->UniqNum[1]) << 8) + - (RBYTE(PktCmdP->UniqNum[2]) << 16) + - (RBYTE(PktCmdP->UniqNum[3]) << 24); - - /* - ** Determine if 8 or 16 port RTA - */ - RtaType = GetUnitType(RtaUniq); - - rio_dprintk (RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq); - - Mod = RBYTE(PktCmdP->ModuleTypes); - Mod1 = LONYBLE(Mod); - if (RtaType == TYPE_RTA16) - { - /* - ** Only one ident is set for a 16 port RTA. To make compatible - ** with 8 port, set 2nd ident in Mod2 to the same as Mod1. - */ - Mod2 = Mod1; - rio_dprintk (RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", - p->RIOModuleTypes[Mod1].Name); - } - else - { - Mod2 = HINYBLE(Mod); - rio_dprintk (RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", - p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name); - } - - if ( RtaUniq == 0xffffffff ) - { - ShowPacket( DBG_SPECIAL, PacketP ); - } - - /* - ** try to unhook a command block from the command free list. - */ - if ( !(CmdBlkP = RIOGetCmdBlk()) ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n"); - return 0; - } - - /* - ** Fill in the default info on the command block - */ - CmdBlkP->Packet.dest_unit = Rup; - CmdBlkP->Packet.dest_port = ROUTE_RUP; - CmdBlkP->Packet.src_unit = HOST_ID; - CmdBlkP->Packet.src_port = ROUTE_RUP; - CmdBlkP->Packet.len = PKT_CMD_BIT | 1; - CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; - PktReplyP = (struct PktCmd_M *)CmdBlkP->Packet.data; - - if (! RIOBootOk(p, HostP, RtaUniq)) - { - rio_dprintk (RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", - RtaUniq); - PktReplyP->Command = ROUTE_FOAD; - HostP->Copy("RT_FOAD", PktReplyP->CommandText, 7); - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return TRUE; - } - - /* - ** Check to see if the RTA is configured for this host - */ - for ( ThisUnit=0; ThisUnit<MAX_RUP; ThisUnit++ ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n", - ThisUnit, - HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? - "Slot-In-Use":"Not In Use", - HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? - "Slot-Tentative":"Not Tentative", - HostP->Mapping[ThisUnit].RtaUniqueNum); - - /* - ** We have an entry for it. - */ - if ( (HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && - (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq) ) - { - if (RtaType == TYPE_RTA16) - { - ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1; - rio_dprintk (RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", - RtaUniq,ThisUnit,ThisUnit2); - } - else - rio_dprintk (RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", - RtaUniq,ThisUnit); - /* - ** If we have no knowledge of booting it, then the host has - ** been re-booted, and so we must kill the RTA, so that it - ** will be booted again (potentially with new bins) - ** and it will then re-ask for an ID, which we will service. - */ - if ( (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && - !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED) ) - { - if ( !(HostP->Mapping[ThisUnit].Flags & MSG_DONE) ) - { - if ( !p->RIONoMessage ) - cprintf("RTA '%s' is being updated.\n",HostP->Mapping[ThisUnit].Name); - HostP->Mapping[ThisUnit].Flags |= MSG_DONE; + + /* + ** The only other command we recognise is a route_request command + */ + if (RBYTE(PktCmdP->Command) != ROUTE_REQUEST) { + rio_dprintk(RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %d ROUTE_RUP\n", RBYTE(PktCmdP->Command), Rup, (int) HostP); + return TRUE; } - PktReplyP->Command = ROUTE_FOAD; - HostP->Copy("RT_FOAD",PktReplyP->CommandText,7); - RIOQueueCmdBlk(HostP, Rup, CmdBlkP); - return TRUE; - } - - /* - ** Send the ID (entry) to this RTA. The ID number is implicit as - ** the offset into the table. It is worth noting at this stage - ** that offset zero in the table contains the entries for the - ** RTA with ID 1!!!! - */ - PktReplyP->Command = ROUTE_ALLOCATE; - PktReplyP->IDNum = ThisUnit+1; - if (RtaType == TYPE_RTA16) - { - if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) - /* - ** Adjust the phb and tx pkt dest_units for 2nd block of 8 - ** only if the RTA has ports associated (SLOT_IN_USE) - */ - RIOFixPhbs(p, HostP, ThisUnit2); - PktReplyP->IDNum2 = ThisUnit2+1; - rio_dprintk (RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", - HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2); - } - else - { - PktReplyP->IDNum2 = ROUTE_NO_ID; - rio_dprintk (RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", - HostP->Mapping[ThisUnit].Name,PktReplyP->IDNum); - } - HostP->Copy("RT_ALLOCAT",PktReplyP->CommandText,10); - - RIOQueueCmdBlk( HostP, Rup, CmdBlkP); - - /* - ** If this is a freshly booted RTA, then we need to re-open - ** the ports, if any where open, so that data may once more - ** flow around the system! - */ - if ( (HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && - (HostP->Mapping[ThisUnit].SysPort != NO_PORT) ) - { + + RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) + (RBYTE(PktCmdP->UniqNum[1]) << 8) + (RBYTE(PktCmdP->UniqNum[2]) << 16) + (RBYTE(PktCmdP->UniqNum[3]) << 24); + /* - ** look at the ports associated with this beast and - ** see if any where open. If they was, then re-open - ** them, using the info from the tty flags. - */ - for ( port=0; port<PORTS_PER_RTA; port++ ) - { - PortP = p->RIOPortp[port+HostP->Mapping[ThisUnit].SysPort]; - if ( PortP->State & (RIO_MOPEN|RIO_LOPEN) ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Re-opened this port\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->MagicFlags |= MAGIC_REBOOT; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } + ** Determine if 8 or 16 port RTA + */ + RtaType = GetUnitType(RtaUniq); + + rio_dprintk(RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq); + + Mod = RBYTE(PktCmdP->ModuleTypes); + Mod1 = LONYBLE(Mod); + if (RtaType == TYPE_RTA16) { + /* + ** Only one ident is set for a 16 port RTA. To make compatible + ** with 8 port, set 2nd ident in Mod2 to the same as Mod1. + */ + Mod2 = Mod1; + rio_dprintk(RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name); + } else { + Mod2 = HINYBLE(Mod); + rio_dprintk(RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name); } - if (RtaType == TYPE_RTA16) - { - for ( port=0; port<PORTS_PER_RTA; port++ ) - { - PortP = p->RIOPortp[port+HostP->Mapping[ThisUnit2].SysPort]; - if ( PortP->State & (RIO_MOPEN|RIO_LOPEN) ) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Re-opened this port\n"); - rio_spin_lock_irqsave(&PortP->portSem, flags); - PortP->MagicFlags |= MAGIC_REBOOT; - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - } - } + + if (RtaUniq == 0xffffffff) { + ShowPacket(DBG_SPECIAL, PacketP); } - } - - /* - ** keep a copy of the module types! - */ - HostP->UnixRups[ThisUnit].ModTypes = Mod; - if (RtaType == TYPE_RTA16) - HostP->UnixRups[ThisUnit2].ModTypes = Mod; - - /* - ** If either of the modules on this unit is read-only or write-only - ** or none-xprint, then we need to transfer that info over to the - ** relevant ports. - */ - if ( HostP->Mapping[ThisUnit].SysPort != NO_PORT ) - { - for ( port=0; port<PORTS_PER_MODULE; port++ ) - { - p->RIOPortp[port+HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port+HostP->Mapping[ThisUnit].SysPort]->Config |= - p->RIOModuleTypes[Mod1].Flags[port]; - p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; + + /* + ** try to unhook a command block from the command free list. + */ + if (!(CmdBlkP = RIOGetCmdBlk())) { + rio_dprintk(RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n"); + return 0; } - if (RtaType == TYPE_RTA16) - { - for ( port=0; port<PORTS_PER_MODULE; port++ ) - { - p->RIOPortp[port+HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port+HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; - p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; - p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; - } + + /* + ** Fill in the default info on the command block + */ + CmdBlkP->Packet.dest_unit = Rup; + CmdBlkP->Packet.dest_port = ROUTE_RUP; + CmdBlkP->Packet.src_unit = HOST_ID; + CmdBlkP->Packet.src_port = ROUTE_RUP; + CmdBlkP->Packet.len = PKT_CMD_BIT | 1; + CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; + PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data; + + if (!RIOBootOk(p, HostP, RtaUniq)) { + rio_dprintk(RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq); + PktReplyP->Command = ROUTE_FOAD; + HostP->Copy("RT_FOAD", PktReplyP->CommandText, 7); + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return TRUE; } - } - - /* - ** Job done, get on with the interrupts! - */ - return TRUE; - } - } - /* - ** There is no table entry for this RTA at all. - ** - ** Lets check to see if we actually booted this unit - if not, - ** then we reset it and it will go round the loop of being booted - ** we can then worry about trying to fit it into the table. - */ - for ( ThisUnit=0; ThisUnit<HostP->NumExtraBooted; ThisUnit++ ) - if ( HostP->ExtraUnits[ThisUnit] == RtaUniq ) - break; - if ( ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS ) - { - /* - ** if the unit wasn't in the table, and the table wasn't full, then - ** we reset the unit, because we didn't boot it. - ** However, if the table is full, it could be that we did boot - ** this unit, and so we won't reboot it, because it isn't really - ** all that disasterous to keep the old bins in most cases. This - ** is a rather tacky feature, but we are on the edge of reallity - ** here, because the implication is that someone has connected - ** 16+MAX_EXTRA_UNITS onto one host. - */ - static int UnknownMesgDone = 0; - - if ( !UnknownMesgDone ) - { - if (! p->RIONoMessage) - cprintf("One or more unknown RTAs are being updated.\n"); - UnknownMesgDone = 1; - } - - PktReplyP->Command = ROUTE_FOAD; - HostP->Copy("RT_FOAD",PktReplyP->CommandText,7); - } - else - { - /* - ** we did boot it (as an extra), and there may now be a table - ** slot free (because of a delete), so we will try to make - ** a tentative entry for it, so that the configurator can see it - ** and fill in the details for us. - */ - if (RtaType == TYPE_RTA16) - { - if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) - { - RIODefaultName(p, HostP, ThisUnit); - FillSlot(ThisUnit, ThisUnit2, RtaUniq, HostP); + + /* + ** Check to see if the RTA is configured for this host + */ + for (ThisUnit = 0; ThisUnit < MAX_RUP; ThisUnit++) { + rio_dprintk(RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n", + ThisUnit, HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use" : "Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative" : "Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum); + + /* + ** We have an entry for it. + */ + if ((HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq)) { + if (RtaType == TYPE_RTA16) { + ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1; + rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", RtaUniq, ThisUnit, ThisUnit2); + } else + rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", RtaUniq, ThisUnit); + /* + ** If we have no knowledge of booting it, then the host has + ** been re-booted, and so we must kill the RTA, so that it + ** will be booted again (potentially with new bins) + ** and it will then re-ask for an ID, which we will service. + */ + if ((HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED)) { + if (!(HostP->Mapping[ThisUnit].Flags & MSG_DONE)) { + if (!p->RIONoMessage) + cprintf("RTA '%s' is being updated.\n", HostP->Mapping[ThisUnit].Name); + HostP->Mapping[ThisUnit].Flags |= MSG_DONE; + } + PktReplyP->Command = ROUTE_FOAD; + HostP->Copy("RT_FOAD", PktReplyP->CommandText, 7); + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return TRUE; + } + + /* + ** Send the ID (entry) to this RTA. The ID number is implicit as + ** the offset into the table. It is worth noting at this stage + ** that offset zero in the table contains the entries for the + ** RTA with ID 1!!!! + */ + PktReplyP->Command = ROUTE_ALLOCATE; + PktReplyP->IDNum = ThisUnit + 1; + if (RtaType == TYPE_RTA16) { + if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) + /* + ** Adjust the phb and tx pkt dest_units for 2nd block of 8 + ** only if the RTA has ports associated (SLOT_IN_USE) + */ + RIOFixPhbs(p, HostP, ThisUnit2); + PktReplyP->IDNum2 = ThisUnit2 + 1; + rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2); + } else { + PktReplyP->IDNum2 = ROUTE_NO_ID; + rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum); + } + HostP->Copy("RT_ALLOCAT", PktReplyP->CommandText, 10); + + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + + /* + ** If this is a freshly booted RTA, then we need to re-open + ** the ports, if any where open, so that data may once more + ** flow around the system! + */ + if ((HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT)) { + /* + ** look at the ports associated with this beast and + ** see if any where open. If they was, then re-open + ** them, using the info from the tty flags. + */ + for (port = 0; port < PORTS_PER_RTA; port++) { + PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]; + if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { + rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->MagicFlags |= MAGIC_REBOOT; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + } + if (RtaType == TYPE_RTA16) { + for (port = 0; port < PORTS_PER_RTA; port++) { + PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]; + if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) { + rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n"); + rio_spin_lock_irqsave(&PortP->portSem, flags); + PortP->MagicFlags |= MAGIC_REBOOT; + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + } + } + } + } + + /* + ** keep a copy of the module types! + */ + HostP->UnixRups[ThisUnit].ModTypes = Mod; + if (RtaType == TYPE_RTA16) + HostP->UnixRups[ThisUnit2].ModTypes = Mod; + + /* + ** If either of the modules on this unit is read-only or write-only + ** or none-xprint, then we need to transfer that info over to the + ** relevant ports. + */ + if (HostP->Mapping[ThisUnit].SysPort != NO_PORT) { + for (port = 0; port < PORTS_PER_MODULE; port++) { + p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; + } + if (RtaType == TYPE_RTA16) { + for (port = 0; port < PORTS_PER_MODULE; port++) { + p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; + p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; + } + } + } + + /* + ** Job done, get on with the interrupts! + */ + return TRUE; + } } - } - else - { - if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) - { - RIODefaultName(p, HostP, ThisUnit); - FillSlot(ThisUnit, 0, RtaUniq, HostP); + /* + ** There is no table entry for this RTA at all. + ** + ** Lets check to see if we actually booted this unit - if not, + ** then we reset it and it will go round the loop of being booted + ** we can then worry about trying to fit it into the table. + */ + for (ThisUnit = 0; ThisUnit < HostP->NumExtraBooted; ThisUnit++) + if (HostP->ExtraUnits[ThisUnit] == RtaUniq) + break; + if (ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS) { + /* + ** if the unit wasn't in the table, and the table wasn't full, then + ** we reset the unit, because we didn't boot it. + ** However, if the table is full, it could be that we did boot + ** this unit, and so we won't reboot it, because it isn't really + ** all that disasterous to keep the old bins in most cases. This + ** is a rather tacky feature, but we are on the edge of reallity + ** here, because the implication is that someone has connected + ** 16+MAX_EXTRA_UNITS onto one host. + */ + static int UnknownMesgDone = 0; + + if (!UnknownMesgDone) { + if (!p->RIONoMessage) + cprintf("One or more unknown RTAs are being updated.\n"); + UnknownMesgDone = 1; + } + + PktReplyP->Command = ROUTE_FOAD; + HostP->Copy("RT_FOAD", PktReplyP->CommandText, 7); + } else { + /* + ** we did boot it (as an extra), and there may now be a table + ** slot free (because of a delete), so we will try to make + ** a tentative entry for it, so that the configurator can see it + ** and fill in the details for us. + */ + if (RtaType == TYPE_RTA16) { + if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) { + RIODefaultName(p, HostP, ThisUnit); + FillSlot(ThisUnit, ThisUnit2, RtaUniq, HostP); + } + } else { + if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) { + RIODefaultName(p, HostP, ThisUnit); + FillSlot(ThisUnit, 0, RtaUniq, HostP); + } + } + PktReplyP->Command = ROUTE_USED; + HostP->Copy("RT_USED", PktReplyP->CommandText, 7); } - } - PktReplyP->Command = ROUTE_USED; - HostP->Copy("RT_USED",PktReplyP->CommandText,7); - } - RIOQueueCmdBlk( HostP, Rup, CmdBlkP); - return TRUE; + RIOQueueCmdBlk(HostP, Rup, CmdBlkP); + return TRUE; } -void -RIOFixPhbs(p, HostP, unit) +void RIOFixPhbs(p, HostP, unit) struct rio_info *p; struct Host *HostP; uint unit; { - ushort link, port; - struct Port *PortP; + ushort link, port; + struct Port *PortP; unsigned long flags; int PortN = HostP->Mapping[unit].SysPort; - rio_dprintk (RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN); + rio_dprintk(RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN); if (PortN != -1) { - ushort dest_unit = HostP->Mapping[unit].ID2; + ushort dest_unit = HostP->Mapping[unit].ID2; /* - ** Get the link number used for the 1st 8 phbs on this unit. - */ + ** Get the link number used for the 1st 8 phbs on this unit. + */ PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort]; link = RWORD(PortP->PhbP->link); for (port = 0; port < PORTS_PER_RTA; port++, PortN++) { - ushort dest_port = port + 8; + ushort dest_port = port + 8; #if 0 - uint PktInt; + uint PktInt; #endif - WORD *TxPktP; - PKT *Pkt; + WORD *TxPktP; + PKT *Pkt; PortP = p->RIOPortp[PortN]; rio_spin_lock_irqsave(&PortP->portSem, flags); /* - ** If RTA is not powered on, the tx packets will be - ** unset, so go no further. - */ + ** If RTA is not powered on, the tx packets will be + ** unset, so go no further. + */ if (PortP->TxStart == 0) { - rio_dprintk (RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n"); - rio_spin_unlock_irqrestore(&PortP->portSem, flags); - break; + rio_dprintk(RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n"); + rio_spin_unlock_irqrestore(&PortP->portSem, flags); + break; } /* - ** For the second slot of a 16 port RTA, the driver needs to - ** sort out the phb to port mappings. The dest_unit for this - ** group of 8 phbs is set to the dest_unit of the accompanying - ** 8 port block. The dest_port of the second unit is set to - ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port - ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6 - ** (being the second map ID) will be sent to dest_unit 5, port - ** 14. When this RTA is deleted, dest_unit for ID 6 will be - ** restored, and the dest_port will be reduced by 8. - ** Transmit packets also have a destination field which needs - ** adjusting in the same manner. - ** Note that the unit/port bytes in 'dest' are swapped. - ** We also need to adjust the phb and rup link numbers for the - ** second block of 8 ttys. - */ + ** For the second slot of a 16 port RTA, the driver needs to + ** sort out the phb to port mappings. The dest_unit for this + ** group of 8 phbs is set to the dest_unit of the accompanying + ** 8 port block. The dest_port of the second unit is set to + ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port + ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6 + ** (being the second map ID) will be sent to dest_unit 5, port + ** 14. When this RTA is deleted, dest_unit for ID 6 will be + ** restored, and the dest_port will be reduced by 8. + ** Transmit packets also have a destination field which needs + ** adjusting in the same manner. + ** Note that the unit/port bytes in 'dest' are swapped. + ** We also need to adjust the phb and rup link numbers for the + ** second block of 8 ttys. + */ for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { /* - ** *TxPktP is the pointer to the transmit packet on the host - ** card. This needs to be translated into a 32 bit pointer - ** so it can be accessed from the driver. - */ - Pkt = (PKT *) RIO_PTR(HostP->Caddr,RINDW(TxPktP)); + ** *TxPktP is the pointer to the transmit packet on the host + ** card. This needs to be translated into a 32 bit pointer + ** so it can be accessed from the driver. + */ + Pkt = (PKT *) RIO_PTR(HostP->Caddr, RINDW(TxPktP)); /* - ** If the packet is used, reset it. - */ - Pkt = (PKT *)((uint)Pkt & ~PKT_IN_USE); + ** If the packet is used, reset it. + */ + Pkt = (PKT *) ((uint) Pkt & ~PKT_IN_USE); WBYTE(Pkt->dest_unit, dest_unit); WBYTE(Pkt->dest_port, dest_port); } - rio_dprintk (RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", - RWORD(PortP->PhbP->destination) & 0xff, - (RWORD(PortP->PhbP->destination) >> 8) & 0xff, - dest_unit, dest_port); + rio_dprintk(RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", RWORD(PortP->PhbP->destination) & 0xff, (RWORD(PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port); WWORD(PortP->PhbP->destination, dest_unit + (dest_port << 8)); WWORD(PortP->PhbP->link, link); rio_spin_unlock_irqrestore(&PortP->portSem, flags); } /* - ** Now make sure the range of ports to be serviced includes - ** the 2nd 8 on this 16 port RTA. - */ - if (link > 3) return; + ** Now make sure the range of ports to be serviced includes + ** the 2nd 8 on this 16 port RTA. + */ + if (link > 3) + return; if (((unit * 8) + 7) > RWORD(HostP->LinkStrP[link].last_port)) { - rio_dprintk (RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7); + rio_dprintk(RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7); WWORD(HostP->LinkStrP[link].last_port, (unit * 8) + 7); } } @@ -723,9 +615,8 @@ uint unit; ** the world about it. This is done to ensure that the configurator ** only gets up-to-date information about what is going on. */ -static int -RIOCheckIsolated(p, HostP, UnitId) -struct rio_info * p; +static int RIOCheckIsolated(p, HostP, UnitId) +struct rio_info *p; struct Host *HostP; uint UnitId; { @@ -733,16 +624,16 @@ uint UnitId; rio_spin_lock_irqsave(&HostP->HostLock, flags); #ifdef CHECK - CheckHostP( HostP ); - CheckUnitId( UnitId ); + CheckHostP(HostP); + CheckUnitId(UnitId); #endif - if ( RIOCheck( HostP, UnitId ) ) { - rio_dprintk (RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId); + if (RIOCheck(HostP, UnitId)) { + rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId); rio_spin_unlock_irqrestore(&HostP->HostLock, flags); - return(0); + return (0); } - RIOIsolate(p, HostP, UnitId ); + RIOIsolate(p, HostP, UnitId); RIOSetChange(p); rio_spin_unlock_irqrestore(&HostP->HostLock, flags); return 1; @@ -753,85 +644,83 @@ uint UnitId; ** all the units attached to it. This will mean that the entire ** subnet will re-introduce itself. */ -static int -RIOIsolate(p, HostP, UnitId) -struct rio_info * p; -struct Host * HostP; -uint UnitId; +static int RIOIsolate(p, HostP, UnitId) +struct rio_info *p; +struct Host *HostP; +uint UnitId; { uint link, unit; #ifdef CHECK - CheckHostP( HostP ); - CheckUnitId( UnitId ); + CheckHostP(HostP); + CheckUnitId(UnitId); #endif UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */ - if ( UnitId >= MAX_RUP ) /* dontcha just lurv unsigned maths! */ - return(0); + if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */ + return (0); - if ( HostP->Mapping[UnitId].Flags & BEEN_HERE ) - return(0); + if (HostP->Mapping[UnitId].Flags & BEEN_HERE) + return (0); HostP->Mapping[UnitId].Flags |= BEEN_HERE; - if ( p->RIOPrintDisabled == DO_PRINT ) - rio_dprintk (RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name); + if (p->RIOPrintDisabled == DO_PRINT) + rio_dprintk(RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name); - for ( link=0; link<LINKS_PER_UNIT; link++) { + for (link = 0; link < LINKS_PER_UNIT; link++) { unit = HostP->Mapping[UnitId].Topology[link].Unit; HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT; HostP->Mapping[UnitId].Topology[link].Link = NO_LINK; - RIOIsolate(p, HostP, unit ); + RIOIsolate(p, HostP, unit); } HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; return 1; } -static int -RIOCheck(HostP, UnitId) +static int RIOCheck(HostP, UnitId) struct Host *HostP; uint UnitId; { - unsigned char link; + unsigned char link; #ifdef CHECK - CheckHostP( HostP ); - CheckUnitId( UnitId ); + CheckHostP(HostP); + CheckUnitId(UnitId); #endif /* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */ - rio_dprintk (RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId); + rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId); - if ( UnitId == HOST_ID ) { + if (UnitId == HOST_ID) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */ return 1; } UnitId--; - if ( UnitId >= MAX_RUP ) { + if (UnitId >= MAX_RUP) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */ return 0; } - for ( link=0; link<LINKS_PER_UNIT; link++ ) { - if ( HostP->Mapping[UnitId].Topology[link].Unit==HOST_ID ) { + for (link = 0; link < LINKS_PER_UNIT; link++) { + if (HostP->Mapping[UnitId].Topology[link].Unit == HOST_ID) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n", - UnitId, 'A'+link)); */ + UnitId, 'A'+link)); */ return 1; } } - if ( HostP->Mapping[UnitId].Flags & BEEN_HERE ) { + if (HostP->Mapping[UnitId].Flags & BEEN_HERE) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */ return 0; } HostP->Mapping[UnitId].Flags |= BEEN_HERE; - for ( link=0; link < LINKS_PER_UNIT; link++ ) { + for (link = 0; link < LINKS_PER_UNIT; link++) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */ - if ( RIOCheck( HostP, HostP->Mapping[UnitId].Topology[link].Unit ) ) { + if (RIOCheck(HostP, HostP->Mapping[UnitId].Topology[link].Unit)) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */ HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; return 1; @@ -841,7 +730,7 @@ uint UnitId; HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */ - + return 0; } @@ -849,61 +738,57 @@ uint UnitId; ** Returns the type of unit (host, 16/8 port RTA) */ -uint -GetUnitType(Uniq) +uint GetUnitType(Uniq) uint Uniq; { - switch ( (Uniq >> 28) & 0xf) - { - case RIO_AT: - case RIO_MCA: - case RIO_EISA: - case RIO_PCI: - rio_dprintk (RIO_DEBUG_ROUTE, "Unit type: Host\n"); - return(TYPE_HOST); - case RIO_RTA_16: - rio_dprintk (RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n"); - return(TYPE_RTA16); - case RIO_RTA: - rio_dprintk (RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n"); - return(TYPE_RTA8); - default : - rio_dprintk (RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n"); - return(99); + switch ((Uniq >> 28) & 0xf) { + case RIO_AT: + case RIO_MCA: + case RIO_EISA: + case RIO_PCI: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Host\n"); + return (TYPE_HOST); + case RIO_RTA_16: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n"); + return (TYPE_RTA16); + case RIO_RTA: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n"); + return (TYPE_RTA8); + default: + rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n"); + return (99); } } -int -RIOSetChange(p) -struct rio_info * p; +int RIOSetChange(p) +struct rio_info *p; { - if ( p->RIOQuickCheck != NOT_CHANGED ) - return(0); + if (p->RIOQuickCheck != NOT_CHANGED) + return (0); p->RIOQuickCheck = CHANGED; - if ( p->RIOSignalProcess ) { - rio_dprintk (RIO_DEBUG_ROUTE, "Send SIG-HUP"); + if (p->RIOSignalProcess) { + rio_dprintk(RIO_DEBUG_ROUTE, "Send SIG-HUP"); /* - psignal( RIOSignalProcess, SIGHUP ); - */ + psignal( RIOSignalProcess, SIGHUP ); + */ } - return(0); + return (0); } -static void -RIOConCon(p, HostP, FromId, FromLink, ToId, ToLink, Change) -struct rio_info * p; +static void RIOConCon(p, HostP, FromId, FromLink, ToId, ToLink, Change) +struct rio_info *p; struct Host *HostP; uint FromId; uint FromLink; uint ToId; uint ToLink; -int Change; +int Change; { - char *FromName; - char *FromType; - char *ToName; - char *ToType; - unsigned int tp; + char *FromName; + char *FromType; + char *ToName; + char *ToType; + unsigned int tp; /* ** 15.10.1998 ARG - ESIL 0759 @@ -932,38 +817,32 @@ int Change; ** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA ** connections and disconnections. */ - if (Change == CONNECT) { - if (p->RIORtaDisCons) p->RIORtaDisCons--; - } - else { + if (Change == CONNECT) { + if (p->RIORtaDisCons) + p->RIORtaDisCons--; + } else { p->RIORtaDisCons++; - } + } - if ( p->RIOPrintDisabled == DONT_PRINT ) + if (p->RIOPrintDisabled == DONT_PRINT) return; - if ( FromId > ToId ) { + if (FromId > ToId) { tp = FromId; FromId = ToId; ToId = tp; tp = FromLink; FromLink = ToLink; ToLink = tp; - } - - FromName = FromId ? HostP->Mapping[FromId-1].Name : HostP->Name; - FromType = FromId ? "RTA" : "HOST"; - ToName = ToId ? HostP->Mapping[ToId-1].Name : HostP->Name; - ToType = ToId ? "RTA" : "HOST"; - - rio_dprintk (RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", - FromType, FromName, 'A'+FromLink, - ToType, ToName, 'A'+ToLink, - (Change==CONNECT) ? "established" : "disconnected"); - cprintf("Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", - FromType, FromName, 'A'+FromLink, - ToType, ToName, 'A'+ToLink, - (Change==CONNECT) ? "established" : "disconnected"); + } + + FromName = FromId ? HostP->Mapping[FromId - 1].Name : HostP->Name; + FromType = FromId ? "RTA" : "HOST"; + ToName = ToId ? HostP->Mapping[ToId - 1].Name : HostP->Name; + ToType = ToId ? "RTA" : "HOST"; + + rio_dprintk(RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); + cprintf("Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected"); } /* @@ -972,24 +851,21 @@ int Change; ** Delete and RTA entry from the saved table given to us ** by the configuration program. */ -static int -RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) +static int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) { - int entry; - - /* - ** We loop for all entries even after finding an entry and - ** zeroing it because we may have two entries to delete if - ** it's a 16 port RTA. - */ - for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) - { - if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) - { - bzero((caddr_t)&p->RIOSavedTable[entry], sizeof(struct Map)); + int entry; + + /* + ** We loop for all entries even after finding an entry and + ** zeroing it because we may have two entries to delete if + ** it's a 16 port RTA. + */ + for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { + if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) { + bzero((caddr_t) & p->RIOSavedTable[entry], sizeof(struct Map)); + } } - } - return 0; + return 0; } @@ -999,64 +875,58 @@ RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) ** Scan the unit links to and return zero if the unit is completely ** disconnected. */ -static int -RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) +static int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) { - int link; - - - rio_dprintk (RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit); - /* - ** If the slot is tentative and does not belong to the - ** second half of a 16 port RTA then scan to see if - ** is disconnected. - */ - for (link = 0; link < LINKS_PER_UNIT; link++) - { - if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT) - break; - } - - /* - ** If not all links are disconnected then we can forget about it. - */ - if (link < LINKS_PER_UNIT) - return 1; + int link; + + + rio_dprintk(RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit); + /* + ** If the slot is tentative and does not belong to the + ** second half of a 16 port RTA then scan to see if + ** is disconnected. + */ + for (link = 0; link < LINKS_PER_UNIT; link++) { + if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT) + break; + } + + /* + ** If not all links are disconnected then we can forget about it. + */ + if (link < LINKS_PER_UNIT) + return 1; #ifdef NEED_TO_FIX_THIS - /* Ok so all the links are disconnected. But we may have only just - ** made this slot tentative and not yet received a topology update. - ** Lets check how long ago we made it tentative. - */ - rio_dprintk (RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit); - if (drv_getparm(LBOLT, (ulong_t *) ¤t_time)) - rio_dprintk (RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n"); - - elapse_time = current_time - TentTime[unit]; - rio_dprintk (RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", - elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time)); - if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", - unit, drv_hztousec(elapse_time)); - return 1; - } + /* Ok so all the links are disconnected. But we may have only just + ** made this slot tentative and not yet received a topology update. + ** Lets check how long ago we made it tentative. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit); + if (drv_getparm(LBOLT, (ulong_t *) & current_time)) + rio_dprintk(RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n"); + + elapse_time = current_time - TentTime[unit]; + rio_dprintk(RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time)); + if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) { + rio_dprintk(RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", unit, drv_hztousec(elapse_time)); + return 1; + } #endif - /* - ** We have found an usable slot. - ** If it is half of a 16 port RTA then delete the other half. - */ - if (HostP->Mapping[unit].ID2 != 0) - { - int nOther = (HostP->Mapping[unit].ID2) -1; - - rio_dprintk (RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther); - bzero((caddr_t)&HostP->Mapping[nOther], sizeof(struct Map)); - } - RIORemoveFromSavedTable(p, &HostP->Mapping[unit]); + /* + ** We have found an usable slot. + ** If it is half of a 16 port RTA then delete the other half. + */ + if (HostP->Mapping[unit].ID2 != 0) { + int nOther = (HostP->Mapping[unit].ID2) - 1; + + rio_dprintk(RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther); + bzero((caddr_t) & HostP->Mapping[nOther], sizeof(struct Map)); + } + RIORemoveFromSavedTable(p, &HostP->Mapping[unit]); - return 0; + return 0; } @@ -1066,150 +936,134 @@ RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) ** This function scans the given host table for either one ** or two free unit ID's. */ -int -RIOFindFreeID(struct rio_info *p, struct Host *HostP, uint *pID1, uint *pID2) +int RIOFindFreeID(struct rio_info *p, struct Host *HostP, uint * pID1, uint * pID2) { - int unit,tempID; - - /* - ** Initialise the ID's to MAX_RUP. - ** We do this to make the loop for setting the ID's as simple as - ** possible. - */ - *pID1 = MAX_RUP; - if (pID2 != NULL) - *pID2 = MAX_RUP; - - /* - ** Scan all entries of the host mapping table for free slots. - ** We scan for free slots first and then if that is not successful - ** we start all over again looking for tentative slots we can re-use. - */ - for (unit = 0; unit < MAX_RUP; unit++) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Scanning unit %d\n",unit); + int unit, tempID; + /* - ** If the flags are zero then the slot is empty. - */ - if (HostP->Mapping[unit].Flags == 0) - { - rio_dprintk (RIO_DEBUG_ROUTE, " This slot is empty.\n"); - /* - ** If we haven't allocated the first ID then do it now. - */ - if (*pID1 == MAX_RUP) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit); - *pID1 = unit; + ** Initialise the ID's to MAX_RUP. + ** We do this to make the loop for setting the ID's as simple as + ** possible. + */ + *pID1 = MAX_RUP; + if (pID2 != NULL) + *pID2 = MAX_RUP; + /* + ** Scan all entries of the host mapping table for free slots. + ** We scan for free slots first and then if that is not successful + ** we start all over again looking for tentative slots we can re-use. + */ + for (unit = 0; unit < MAX_RUP; unit++) { + rio_dprintk(RIO_DEBUG_ROUTE, "Scanning unit %d\n", unit); /* - ** If the second ID is not needed then we can return - ** now. - */ - if (pID2 == NULL) - return 0; - } - else - { - /* - ** Allocate the second slot and return. - */ - rio_dprintk (RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit); - *pID2 = unit; - return 0; - } + ** If the flags are zero then the slot is empty. + */ + if (HostP->Mapping[unit].Flags == 0) { + rio_dprintk(RIO_DEBUG_ROUTE, " This slot is empty.\n"); + /* + ** If we haven't allocated the first ID then do it now. + */ + if (*pID1 == MAX_RUP) { + rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit); + *pID1 = unit; + + /* + ** If the second ID is not needed then we can return + ** now. + */ + if (pID2 == NULL) + return 0; + } else { + /* + ** Allocate the second slot and return. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit); + *pID2 = unit; + return 0; + } + } } - } - - /* - ** If we manage to come out of the free slot loop then we - ** need to start all over again looking for tentative slots - ** that we can re-use. - */ - rio_dprintk (RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n"); - for (unit = 0; unit < MAX_RUP; unit++) - { - if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || - (HostP->Mapping[unit].Flags == 0)) && ! - (HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT )) - { - rio_dprintk (RIO_DEBUG_ROUTE, " Slot %d looks promising.\n",unit); - - if(unit == *pID1) - { - rio_dprintk (RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n"); - continue; - } - - /* - ** Slot is Tentative or Empty, but not a tentative second - ** slot of a 16 porter. - ** Attempt to free up this slot (and its parnter if - ** it is a 16 port slot. The second slot will become - ** empty after a call to RIOFreeDisconnected so thats why - ** we look for empty slots above as well). - */ - if (HostP->Mapping[unit].Flags != 0) - if (RIOFreeDisconnected(p, HostP, unit) != 0) - continue; - /* - ** If we haven't allocated the first ID then do it now. - */ - if (*pID1 == MAX_RUP) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit); - *pID1 = unit; - /* - ** Clear out this slot now that we intend to use it. - */ - bzero(&HostP->Mapping[unit], sizeof(struct Map)); + /* + ** If we manage to come out of the free slot loop then we + ** need to start all over again looking for tentative slots + ** that we can re-use. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n"); + for (unit = 0; unit < MAX_RUP; unit++) { + if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && !(HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT)) { + rio_dprintk(RIO_DEBUG_ROUTE, " Slot %d looks promising.\n", unit); + + if (unit == *pID1) { + rio_dprintk(RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n"); + continue; + } - /* - ** If the second ID is not needed then we can return - ** now. - */ - if (pID2 == NULL) - return 0; - } - else - { - /* - ** Allocate the second slot and return. - */ - rio_dprintk (RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", - unit); - *pID2 = unit; + /* + ** Slot is Tentative or Empty, but not a tentative second + ** slot of a 16 porter. + ** Attempt to free up this slot (and its parnter if + ** it is a 16 port slot. The second slot will become + ** empty after a call to RIOFreeDisconnected so thats why + ** we look for empty slots above as well). + */ + if (HostP->Mapping[unit].Flags != 0) + if (RIOFreeDisconnected(p, HostP, unit) != 0) + continue; + /* + ** If we haven't allocated the first ID then do it now. + */ + if (*pID1 == MAX_RUP) { + rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit); + *pID1 = unit; - /* - ** Clear out this slot now that we intend to use it. - */ - bzero(&HostP->Mapping[unit], sizeof(struct Map)); - - /* At this point under the right(wrong?) conditions - ** we may have a first unit ID being higher than the - ** second unit ID. This is a bad idea if we are about - ** to fill the slots with a 16 port RTA. - ** Better check and swap them over. - */ - - if (*pID1 > *pID2) - { - rio_dprintk (RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2); - tempID = *pID1; - *pID1 = *pID2; - *pID2 = tempID; + /* + ** Clear out this slot now that we intend to use it. + */ + bzero(&HostP->Mapping[unit], sizeof(struct Map)); + + /* + ** If the second ID is not needed then we can return + ** now. + */ + if (pID2 == NULL) + return 0; + } else { + /* + ** Allocate the second slot and return. + */ + rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", unit); + *pID2 = unit; + + /* + ** Clear out this slot now that we intend to use it. + */ + bzero(&HostP->Mapping[unit], sizeof(struct Map)); + + /* At this point under the right(wrong?) conditions + ** we may have a first unit ID being higher than the + ** second unit ID. This is a bad idea if we are about + ** to fill the slots with a 16 port RTA. + ** Better check and swap them over. + */ + + if (*pID1 > *pID2) { + rio_dprintk(RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2); + tempID = *pID1; + *pID1 = *pID2; + *pID2 = tempID; + } + return 0; + } } - return 0; - } } - } - /* - ** If we manage to get to the end of the second loop then we - ** can give up and return a failure. - */ - return 1; + /* + ** If we manage to get to the end of the second loop then we + ** can give up and return a failure. + */ + return 1; } |