aboutsummaryrefslogtreecommitdiff
path: root/drivers/cpufreq
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig8
-rw-r--r--drivers/cpufreq/Kconfig.arm2
-rw-r--r--drivers/cpufreq/Makefile2
-rw-r--r--drivers/cpufreq/cpufreq-dt.c (renamed from drivers/cpufreq/cpufreq-cpu0.c)38
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos4x12-cpufreq.c2
-rw-r--r--drivers/cpufreq/exynos5250-cpufreq.c2
-rw-r--r--drivers/cpufreq/highbank-cpufreq.c6
-rw-r--r--drivers/cpufreq/s5pv210-cpufreq.c2
9 files changed, 32 insertions, 32 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index ffe350f86bca..3489f8f5fada 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -183,14 +183,14 @@ config CPU_FREQ_GOV_CONSERVATIVE
If in doubt, say N.
-config GENERIC_CPUFREQ_CPU0
- tristate "Generic CPU0 cpufreq driver"
+config CPUFREQ_DT
+ tristate "Generic DT based cpufreq driver"
depends on HAVE_CLK && OF
- # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y:
+ # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
- This adds a generic cpufreq driver for CPU0 frequency management.
+ This adds a generic DT based cpufreq driver for frequency management.
It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
systems which share clock and voltage across all CPUs.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 7364a538e056..48ed28b789f7 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -92,7 +92,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
- depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR
+ depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
default m
help
This adds the CPUFreq driver for Calxeda Highbank SoC
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index db6d9a2fea4d..40c53dc1937e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
-obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o
+obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
##################################################################################
# x86 drivers.
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-dt.c
index a5f8c5f5f4f4..e00265066a75 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -4,7 +4,7 @@
* Copyright (C) 2014 Linaro.
* Viresh Kumar <viresh.kumar@linaro.org>
*
- * The OPP code in function cpu0_set_target() is reused from
+ * The OPP code in function set_target() is reused from
* drivers/cpufreq/omap-cpufreq.c
*
* This program is free software; you can redistribute it and/or modify
@@ -35,7 +35,7 @@ struct private_data {
unsigned int voltage_tolerance; /* in percentage */
};
-static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
+static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct dev_pm_opp *opp;
struct cpufreq_frequency_table *freq_table = policy->freq_table;
@@ -176,7 +176,7 @@ try_again:
return ret;
}
-static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
+static int cpufreq_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *freq_table;
struct thermal_cooling_device *cdev;
@@ -287,7 +287,7 @@ out_put_reg_clk:
return ret;
}
-static int cpu0_cpufreq_exit(struct cpufreq_policy *policy)
+static int cpufreq_exit(struct cpufreq_policy *policy)
{
struct private_data *priv = policy->driver_data;
@@ -301,18 +301,18 @@ static int cpu0_cpufreq_exit(struct cpufreq_policy *policy)
return 0;
}
-static struct cpufreq_driver cpu0_cpufreq_driver = {
+static struct cpufreq_driver dt_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
- .target_index = cpu0_set_target,
+ .target_index = set_target,
.get = cpufreq_generic_get,
- .init = cpu0_cpufreq_init,
- .exit = cpu0_cpufreq_exit,
- .name = "generic_cpu0",
+ .init = cpufreq_init,
+ .exit = cpufreq_exit,
+ .name = "cpufreq-dt",
.attr = cpufreq_generic_attr,
};
-static int cpu0_cpufreq_probe(struct platform_device *pdev)
+static int dt_cpufreq_probe(struct platform_device *pdev)
{
struct device *cpu_dev;
struct regulator *cpu_reg;
@@ -334,30 +334,30 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
if (!IS_ERR(cpu_reg))
regulator_put(cpu_reg);
- ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
+ ret = cpufreq_register_driver(&dt_cpufreq_driver);
if (ret)
dev_err(cpu_dev, "failed register driver: %d\n", ret);
return ret;
}
-static int cpu0_cpufreq_remove(struct platform_device *pdev)
+static int dt_cpufreq_remove(struct platform_device *pdev)
{
- cpufreq_unregister_driver(&cpu0_cpufreq_driver);
+ cpufreq_unregister_driver(&dt_cpufreq_driver);
return 0;
}
-static struct platform_driver cpu0_cpufreq_platdrv = {
+static struct platform_driver dt_cpufreq_platdrv = {
.driver = {
- .name = "cpufreq-cpu0",
+ .name = "cpufreq-dt",
.owner = THIS_MODULE,
},
- .probe = cpu0_cpufreq_probe,
- .remove = cpu0_cpufreq_remove,
+ .probe = dt_cpufreq_probe,
+ .remove = dt_cpufreq_remove,
};
-module_platform_driver(cpu0_cpufreq_platdrv);
+module_platform_driver(dt_cpufreq_platdrv);
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
-MODULE_DESCRIPTION("Generic CPU0 cpufreq driver");
+MODULE_DESCRIPTION("Generic cpufreq driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 61a54310a1b9..843ec824fd91 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -127,7 +127,7 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
if (!np) {
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 351a2074cfea..9e78a850e29f 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -174,7 +174,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
if (!np) {
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index c91ce69dc631..3eafdc7ba787 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -153,7 +153,7 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
* dependencies on platform headers. It is necessary to enable
* Exynos multi-platform support and will be removed together with
* this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
if (!np) {
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
index bf8902a0866d..ec399ad2f059 100644
--- a/drivers/cpufreq/highbank-cpufreq.c
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*
* This driver provides the clk notifier callbacks that are used when
- * the cpufreq-cpu0 driver changes to frequency to alert the highbank
+ * the cpufreq-dt driver changes to frequency to alert the highbank
* EnergyCore Management Engine (ECME) about the need to change
* voltage. The ECME interfaces with the actual voltage regulators.
*/
@@ -60,7 +60,7 @@ static struct notifier_block hb_cpufreq_clk_nb = {
static int hb_cpufreq_driver_init(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+ struct platform_device_info devinfo = { .name = "cpufreq-dt", };
struct device *cpu_dev;
struct clk *cpu_clk;
struct device_node *np;
@@ -95,7 +95,7 @@ static int hb_cpufreq_driver_init(void)
goto out_put_node;
}
- /* Instantiate cpufreq-cpu0 */
+ /* Instantiate cpufreq-dt */
platform_device_register_full(&devinfo);
out_put_node:
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 3f9791f07b8e..567caa6313ff 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -597,7 +597,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
* and dependencies on platform headers. It is necessary to enable
* S5PV210 multi-platform support and will be removed together with
* this whole driver as soon as S5PV210 gets migrated to use
- * cpufreq-cpu0 driver.
+ * cpufreq-dt driver.
*/
np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
if (!np) {