diff options
Diffstat (limited to 'drivers/dma')
-rw-r--r-- | drivers/dma/Kconfig | 2 | ||||
-rw-r--r-- | drivers/dma/stm32-dma.c | 93 |
2 files changed, 61 insertions, 34 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 91bb3dbcc941..7dff8467481a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -458,7 +458,7 @@ config STM32_DMA help Enable support for the on-chip DMA controller on STMicroelectronics STM32 MCUs. - If you have a board based on such a MCU and wish to use DMA say Y or M + If you have a board based on such a MCU and wish to use DMA say Y here. config S3C24XX_DMAC diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 3688d0873a3e..4eacd9dd5710 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -114,6 +114,7 @@ #define STM32_DMA_MAX_CHANNELS 0x08 #define STM32_DMA_MAX_REQUEST_ID 0x08 #define STM32_DMA_MAX_DATA_PARAM 0x03 +#define STM32_DMA_MAX_BURST 16 enum stm32_dma_width { STM32_DMA_BYTE, @@ -403,6 +404,13 @@ static int stm32_dma_terminate_all(struct dma_chan *c) return 0; } +static void stm32_dma_synchronize(struct dma_chan *c) +{ + struct stm32_dma_chan *chan = to_stm32_dma_chan(c); + + vchan_synchronize(&chan->vchan); +} + static void stm32_dma_dump_reg(struct stm32_dma_chan *chan) { struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); @@ -421,7 +429,7 @@ static void stm32_dma_dump_reg(struct stm32_dma_chan *chan) dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr); } -static int stm32_dma_start_transfer(struct stm32_dma_chan *chan) +static void stm32_dma_start_transfer(struct stm32_dma_chan *chan) { struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); struct virt_dma_desc *vdesc; @@ -432,12 +440,12 @@ static int stm32_dma_start_transfer(struct stm32_dma_chan *chan) ret = stm32_dma_disable_chan(chan); if (ret < 0) - return ret; + return; if (!chan->desc) { vdesc = vchan_next_desc(&chan->vchan); if (!vdesc) - return -EPERM; + return; chan->desc = to_stm32_dma_desc(vdesc); chan->next_sg = 0; @@ -471,7 +479,7 @@ static int stm32_dma_start_transfer(struct stm32_dma_chan *chan) chan->busy = true; - return 0; + dev_dbg(chan2dev(chan), "vchan %p: started\n", &chan->vchan); } static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan) @@ -500,8 +508,6 @@ static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan) dev_dbg(chan2dev(chan), "CT=0 <=> SM1AR: 0x%08x\n", stm32_dma_read(dmadev, STM32_DMA_SM1AR(id))); } - - chan->next_sg++; } } @@ -510,6 +516,7 @@ static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan) if (chan->desc) { if (chan->desc->cyclic) { vchan_cyclic_callback(&chan->desc->vdesc); + chan->next_sg++; stm32_dma_configure_next_sg(chan); } else { chan->busy = false; @@ -552,15 +559,13 @@ static void stm32_dma_issue_pending(struct dma_chan *c) { struct stm32_dma_chan *chan = to_stm32_dma_chan(c); unsigned long flags; - int ret; spin_lock_irqsave(&chan->vchan.lock, flags); - if (!chan->busy) { - if (vchan_issue_pending(&chan->vchan) && !chan->desc) { - ret = stm32_dma_start_transfer(chan); - if ((!ret) && (chan->desc->cyclic)) - stm32_dma_configure_next_sg(chan); - } + if (vchan_issue_pending(&chan->vchan) && !chan->desc && !chan->busy) { + dev_dbg(chan2dev(chan), "vchan %p: issued\n", &chan->vchan); + stm32_dma_start_transfer(chan); + if (chan->desc->cyclic) + stm32_dma_configure_next_sg(chan); } spin_unlock_irqrestore(&chan->vchan.lock, flags); } @@ -848,26 +853,40 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy( return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags); } +static u32 stm32_dma_get_remaining_bytes(struct stm32_dma_chan *chan) +{ + u32 dma_scr, width, ndtr; + struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); + + dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); + width = STM32_DMA_SCR_PSIZE_GET(dma_scr); + ndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id)); + + return ndtr << width; +} + static size_t stm32_dma_desc_residue(struct stm32_dma_chan *chan, struct stm32_dma_desc *desc, u32 next_sg) { - struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); - u32 dma_scr, width, residue, count; + u32 residue = 0; int i; - residue = 0; + /* + * In cyclic mode, for the last period, residue = remaining bytes from + * NDTR + */ + if (chan->desc->cyclic && next_sg == 0) + return stm32_dma_get_remaining_bytes(chan); + /* + * For all other periods in cyclic mode, and in sg mode, + * residue = remaining bytes from NDTR + remaining periods/sg to be + * transferred + */ for (i = next_sg; i < desc->num_sgs; i++) residue += desc->sg_req[i].len; - - if (next_sg != 0) { - dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); - width = STM32_DMA_SCR_PSIZE_GET(dma_scr); - count = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id)); - - residue += count << width; - } + residue += stm32_dma_get_remaining_bytes(chan); return residue; } @@ -968,30 +987,36 @@ static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma) { struct stm32_dma_device *dmadev = ofdma->of_dma_data; + struct device *dev = dmadev->ddev.dev; struct stm32_dma_cfg cfg; struct stm32_dma_chan *chan; struct dma_chan *c; - if (dma_spec->args_count < 3) + if (dma_spec->args_count < 4) { + dev_err(dev, "Bad number of cells\n"); return NULL; + } cfg.channel_id = dma_spec->args[0]; cfg.request_line = dma_spec->args[1]; cfg.stream_config = dma_spec->args[2]; - cfg.threshold = 0; + cfg.threshold = dma_spec->args[3]; - if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >= - STM32_DMA_MAX_REQUEST_ID)) + if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || + (cfg.request_line >= STM32_DMA_MAX_REQUEST_ID)) { + dev_err(dev, "Bad channel and/or request id\n"); return NULL; - - if (dma_spec->args_count > 3) - cfg.threshold = dma_spec->args[3]; + } chan = &dmadev->chan[cfg.channel_id]; c = dma_get_slave_channel(&chan->vchan.chan); - if (c) - stm32_dma_set_config(chan, &cfg); + if (!c) { + dev_err(dev, "No more channel avalaible\n"); + return NULL; + } + + stm32_dma_set_config(chan, &cfg); return c; } @@ -1055,6 +1080,7 @@ static int stm32_dma_probe(struct platform_device *pdev) dd->device_prep_dma_cyclic = stm32_dma_prep_dma_cyclic; dd->device_config = stm32_dma_slave_config; dd->device_terminate_all = stm32_dma_terminate_all; + dd->device_synchronize = stm32_dma_synchronize; dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); @@ -1063,6 +1089,7 @@ static int stm32_dma_probe(struct platform_device *pdev) BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; + dd->max_burst = STM32_DMA_MAX_BURST; dd->dev = &pdev->dev; INIT_LIST_HEAD(&dd->channels); |