aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio/cs5535-gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/cs5535-gpio.c')
-rw-r--r--drivers/gpio/cs5535-gpio.c15
1 files changed, 11 insertions, 4 deletions
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index 599f6c9e0fbf..79eb9c5a2923 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,15 +56,22 @@ static struct cs5535_gpio_chip {
* registers, see include/linux/cs5535.h.
*/
-static void errata_outl(u32 val, unsigned long addr)
+static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
+ unsigned int reg)
{
+ unsigned long addr = chip->base + 0x80 + reg;
+
/*
* According to the CS5536 errata (#36), after suspend
* a write to the high bank GPIO register will clear all
* non-selected bits; the recommended workaround is a
* read-modify-write operation.
+ *
+ * Don't apply this errata to the edge status GPIOs, as writing
+ * to their lower bits will clear them.
*/
- val |= inl(addr);
+ if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS)
+ val |= inl(addr);
outl(val, addr);
}
@@ -76,7 +83,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
outl(1 << offset, chip->base + reg);
else
/* high bank register */
- errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
+ errata_outl(chip, 1 << (offset - 16), reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -98,7 +105,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
- errata_outl(1 << offset, chip->base + 0x80 + reg);
+ errata_outl(chip, 1 << offset, reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)