diff options
Diffstat (limited to 'drivers/hwmon/it87.c')
| -rw-r--r-- | drivers/hwmon/it87.c | 27 |
1 files changed, 24 insertions, 3 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 2f782e3f9a2b..0ffe84d190bb 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -125,6 +125,7 @@ superio_exit(void) /* Logical device 7 registers (IT8712F and later) */ #define IT87_SIO_GPIO3_REG 0x27 +#define IT87_SIO_GPIO5_REG 0x29 #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ #define IT87_SIO_VID_REG 0xfc /* VID value */ @@ -245,8 +246,9 @@ struct it87_sio_data { /* Values read from Super-I/O config space */ u8 revision; u8 vid_value; + /* Features skipped based on config or DMI */ u8 skip_vid; - /* Values set based on DMI strings */ + u8 skip_fan; u8 skip_pwm; }; @@ -1044,6 +1046,19 @@ static int __init it87_find(unsigned short *address, sio_data->skip_vid = 1; } + /* Check if fan3 is there or not */ + if (reg & (1 << 6)) + sio_data->skip_pwm |= (1 << 2); + if (reg & (1 << 7)) + sio_data->skip_fan |= (1 << 2); + + /* Check if fan2 is there or not */ + reg = superio_inb(IT87_SIO_GPIO5_REG); + if (reg & (1 << 1)) + sio_data->skip_pwm |= (1 << 1); + if (reg & (1 << 2)) + sio_data->skip_fan |= (1 << 1); + if ((sio_data->type == it8718 || sio_data->type == it8720) && !(sio_data->skip_vid)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); @@ -1367,8 +1382,10 @@ static int __devinit it87_check_pwm(struct device *dev) /* Called when we have found a new IT87. */ static void __devinit it87_init_device(struct platform_device *pdev) { + struct it87_sio_data *sio_data = pdev->dev.platform_data; struct it87_data *data = platform_get_drvdata(pdev); int tmp, i; + u8 mask; /* initialize to sane defaults: * - if the chip is in manual pwm mode, this will be overwritten with @@ -1414,10 +1431,11 @@ static void __devinit it87_init_device(struct platform_device *pdev) } /* Check if tachometers are reset manually or by some reason */ + mask = 0x70 & ~(sio_data->skip_fan << 4); data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL); - if ((data->fan_main_ctrl & 0x70) == 0) { + if ((data->fan_main_ctrl & mask) == 0) { /* Enable all fan tachometers */ - data->fan_main_ctrl |= 0x70; + data->fan_main_ctrl |= mask; it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; @@ -1440,6 +1458,9 @@ static void __devinit it87_init_device(struct platform_device *pdev) } } + /* Fan input pins may be used for alternative functions */ + data->has_fan &= ~sio_data->skip_fan; + /* Set current fan mode registers and the default settings for the * other mode registers */ for (i = 0; i < 3; i++) { |