diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 72 |
2 files changed, 1 insertions, 74 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 72b3b44b5be7..d4975444a32d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1010,8 +1010,7 @@ config I2C_RZV2M config I2C_S3C2410 tristate "S3C/Exynos I2C Driver" - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \ - ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST help Say Y here to include support for I2C controller in the Samsung SoCs (S3C, S5Pv210, Exynos). diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 36dab9cd208c..45e9df81345a 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -116,9 +116,6 @@ struct s3c24xx_i2c { struct s3c2410_platform_i2c *pdata; struct gpio_desc *gpios[2]; struct pinctrl *pctrl; -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ) - struct notifier_block freq_transition; -#endif struct regmap *sysreg; unsigned int sys_i2c_cfg; }; @@ -885,65 +882,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) return 0; } -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ) - -#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition) - -static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb, - unsigned long val, void *data) -{ - struct s3c24xx_i2c *i2c = freq_to_i2c(nb); - unsigned int got; - int delta_f; - int ret; - - delta_f = clk_get_rate(i2c->clk) - i2c->clkrate; - - /* if we're post-change and the input clock has slowed down - * or at pre-change and the clock is about to speed up, then - * adjust our clock rate. <0 is slow, >0 speedup. - */ - - if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) || - (val == CPUFREQ_PRECHANGE && delta_f > 0)) { - i2c_lock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER); - ret = s3c24xx_i2c_clockrate(i2c, &got); - i2c_unlock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER); - - if (ret < 0) - dev_err(i2c->dev, "cannot find frequency (%d)\n", ret); - else - dev_info(i2c->dev, "setting freq %d\n", got); - } - - return 0; -} - -static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c) -{ - i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition; - - return cpufreq_register_notifier(&i2c->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); -} - -static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) -{ - cpufreq_unregister_notifier(&i2c->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); -} - -#else -static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c) -{ - return 0; -} - -static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) -{ -} -#endif - #ifdef CONFIG_OF static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) { @@ -1152,13 +1090,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) } } - ret = s3c24xx_i2c_register_cpufreq(i2c); - if (ret < 0) { - dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); - clk_unprepare(i2c->clk); - return ret; - } - /* * Note, previous versions of the driver used i2c_add_adapter() * to add the bus at any number. We now pass the bus number via @@ -1175,7 +1106,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { pm_runtime_disable(&pdev->dev); - s3c24xx_i2c_deregister_cpufreq(i2c); clk_unprepare(i2c->clk); return ret; } @@ -1192,8 +1122,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); - s3c24xx_i2c_deregister_cpufreq(i2c); - i2c_del_adapter(&i2c->adap); return 0; |