diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 12 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 12 |
2 files changed, 14 insertions, 10 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index cd38b3fccc7b..eb522b38acf3 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -122,6 +122,13 @@ struct inv_mpu6050_chip_config { u8 user_ctrl; }; +/* + * Maximum of 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8. + * May be less if fewer channels are enabled, as long as the timestamp + * remains 8 byte aligned + */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 32 + /** * struct inv_mpu6050_hw - Other important hardware information. * @whoami: Self identification byte from WHO_AM_I register @@ -165,6 +172,7 @@ struct inv_mpu6050_hw { * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss. * @magn_orient: magnetometer sensor chip orientation if available. * @suspended_sensors: sensors mask of sensors turned off for suspend + * @data: dma safe buffer used for bulk reads. */ struct inv_mpu6050_state { struct mutex lock; @@ -190,6 +198,7 @@ struct inv_mpu6050_state { s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + u8 data[INV_MPU6050_OUTPUT_DATA_SIZE] ____cacheline_aligned; }; /*register and associated bit definition*/ @@ -334,9 +343,6 @@ struct inv_mpu6050_state { #define INV_ICM20608_TEMP_OFFSET 8170 #define INV_ICM20608_TEMP_SCALE 3059976 -/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ -#define INV_MPU6050_OUTPUT_DATA_SIZE 32 - #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_ACTIVE_HIGH 0x00 #define INV_MPU6050_ACTIVE_LOW 0x80 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index b533fa2dad0a..d8e6b88ddffc 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/poll.h> #include <linux/math64.h> -#include <asm/unaligned.h> #include "inv_mpu_iio.h" /** @@ -121,7 +120,6 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) struct inv_mpu6050_state *st = iio_priv(indio_dev); size_t bytes_per_datum; int result; - u8 data[INV_MPU6050_OUTPUT_DATA_SIZE]; u16 fifo_count; s64 timestamp; int int_status; @@ -160,11 +158,11 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes are inside the FIFO * right now */ - result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, - INV_MPU6050_FIFO_COUNT_BYTE); + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, + st->data, INV_MPU6050_FIFO_COUNT_BYTE); if (result) goto end_session; - fifo_count = get_unaligned_be16(&data[0]); + fifo_count = be16_to_cpup((__be16 *)&st->data[0]); /* * Handle fifo overflow by resetting fifo. @@ -182,7 +180,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) inv_mpu6050_update_period(st, pf->timestamp, nb); for (i = 0; i < nb; ++i) { result = regmap_bulk_read(st->map, st->reg->fifo_r_w, - data, bytes_per_datum); + st->data, bytes_per_datum); if (result) goto flush_fifo; /* skip first samples if needed */ @@ -191,7 +189,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) continue; } timestamp = inv_mpu6050_get_timestamp(st); - iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, st->data, timestamp); } end_session: |