diff options
Diffstat (limited to 'drivers/input')
23 files changed, 976 insertions, 182 deletions
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 5baebf62df33..e2752f7364bc 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -77,6 +77,13 @@ config INPUT_MATRIXKMAP To compile this driver as a module, choose M here: the module will be called matrix-keymap. +config INPUT_VIVALDIFMAP + tristate + help + ChromeOS Vivaldi keymap support library. This is a hidden + option so that drivers can use common code to parse and + expose the vivaldi function row keymap. + comment "Userland interfaces" config INPUT_MOUSEDEV diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 037cc595106c..2266c7d010ef 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -12,6 +12,7 @@ input-core-y += touchscreen.o obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o obj-$(CONFIG_INPUT_MATRIXKMAP) += matrix-keymap.o +obj-$(CONFIG_INPUT_VIVALDIFMAP) += vivaldi-fmap.o obj-$(CONFIG_INPUT_LEDS) += input-leds.o obj-$(CONFIG_INPUT_MOUSEDEV) += mousedev.o diff --git a/drivers/input/input.c b/drivers/input/input.c index c3139bc2aa0d..6428cdacf534 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -47,6 +47,17 @@ static DEFINE_MUTEX(input_mutex); static const struct input_value input_value_sync = { EV_SYN, SYN_REPORT, 1 }; +static const unsigned int input_max_code[EV_CNT] = { + [EV_KEY] = KEY_MAX, + [EV_REL] = REL_MAX, + [EV_ABS] = ABS_MAX, + [EV_MSC] = MSC_MAX, + [EV_SW] = SW_MAX, + [EV_LED] = LED_MAX, + [EV_SND] = SND_MAX, + [EV_FF] = FF_MAX, +}; + static inline int is_event_supported(unsigned int code, unsigned long *bm, unsigned int max) { @@ -511,6 +522,9 @@ void input_set_abs_params(struct input_dev *dev, unsigned int axis, { struct input_absinfo *absinfo; + __set_bit(EV_ABS, dev->evbit); + __set_bit(axis, dev->absbit); + input_alloc_absinfo(dev); if (!dev->absinfo) return; @@ -520,12 +534,45 @@ void input_set_abs_params(struct input_dev *dev, unsigned int axis, absinfo->maximum = max; absinfo->fuzz = fuzz; absinfo->flat = flat; - - __set_bit(EV_ABS, dev->evbit); - __set_bit(axis, dev->absbit); } EXPORT_SYMBOL(input_set_abs_params); +/** + * input_copy_abs - Copy absinfo from one input_dev to another + * @dst: Destination input device to copy the abs settings to + * @dst_axis: ABS_* value selecting the destination axis + * @src: Source input device to copy the abs settings from + * @src_axis: ABS_* value selecting the source axis + * + * Set absinfo for the selected destination axis by copying it from + * the specified source input device's source axis. + * This is useful to e.g. setup a pen/stylus input-device for combined + * touchscreen/pen hardware where the pen uses the same coordinates as + * the touchscreen. + */ +void input_copy_abs(struct input_dev *dst, unsigned int dst_axis, + const struct input_dev *src, unsigned int src_axis) +{ + /* src must have EV_ABS and src_axis set */ + if (WARN_ON(!(test_bit(EV_ABS, src->evbit) && + test_bit(src_axis, src->absbit)))) + return; + + /* + * input_alloc_absinfo() may have failed for the source. Our caller is + * expected to catch this when registering the input devices, which may + * happen after the input_copy_abs() call. + */ + if (!src->absinfo) + return; + + input_set_capability(dst, EV_ABS, dst_axis); + if (!dst->absinfo) + return; + + dst->absinfo[dst_axis] = src->absinfo[src_axis]; +} +EXPORT_SYMBOL(input_copy_abs); /** * input_grab_device - grabs device for exclusive use @@ -2074,6 +2121,14 @@ EXPORT_SYMBOL(input_get_timestamp); */ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code) { + if (type < EV_CNT && input_max_code[type] && + code > input_max_code[type]) { + pr_err("%s: invalid code %u for type %u\n", __func__, code, + type); + dump_stack(); + return; + } + switch (type) { case EV_KEY: __set_bit(code, dev->keybit); @@ -2085,9 +2140,6 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int case EV_ABS: input_alloc_absinfo(dev); - if (!dev->absinfo) - return; - __set_bit(code, dev->absbit); break; diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index 592c95b87f54..e10d57bf1180 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -123,7 +123,7 @@ static void adi_read_packet(struct adi_port *port) { struct adi *adi = port->adi; struct gameport *gameport = port->gameport; - unsigned char u, v, w, x, z; + unsigned char u, v, w, x; int t[2], s[2], i; unsigned long flags; @@ -136,7 +136,7 @@ static void adi_read_packet(struct adi_port *port) local_irq_save(flags); gameport_trigger(gameport); - v = z = gameport_read(gameport); + v = gameport_read(gameport); do { u = v; diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 4c914f75a902..18190b529bca 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -131,7 +131,7 @@ static const struct xpad_device { { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, - { 0x045e, 0x0b12, "Microsoft Xbox One X pad", MAP_SELECT_BUTTON, XTYPE_XBOXONE }, + { 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE }, { 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 }, diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9417ee0b1eff..4ea79db8f134 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -103,6 +103,7 @@ config KEYBOARD_ATKBD select SERIO_LIBPS2 select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO select SERIO_GSCPS2 if GSC + select INPUT_VIVALDIFMAP help Say Y here if you want to use a standard AT or PS/2 keyboard. Usually you'll need this, unless you have a different type keyboard (USB, ADB @@ -749,6 +750,7 @@ config KEYBOARD_XTKBD config KEYBOARD_CROS_EC tristate "ChromeOS EC keyboard" select INPUT_MATRIXKMAP + select INPUT_VIVALDIFMAP depends on CROS_EC help Say Y here to enable the matrix keyboard used by ChromeOS devices @@ -779,6 +781,18 @@ config KEYBOARD_BCM To compile this driver as a module, choose M here: the module will be called bcm-keypad. +config KEYBOARD_MT6779 + tristate "MediaTek Keypad Support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select REGMAP_MMIO + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad on MediaTek SoCs. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mt6779-keypad. + config KEYBOARD_MTK_PMIC tristate "MediaTek PMIC keys support" depends on MFD_MT6397 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index e3c8648f834e..721936e90290 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o +obj-$(CONFIG_KEYBOARD_MT6779) += mt6779-keypad.o obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index fbdef95291e9..d4131236d18c 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/input.h> +#include <linux/input/vivaldi-fmap.h> #include <linux/serio.h> #include <linux/workqueue.h> #include <linux/libps2.h> @@ -64,8 +65,6 @@ static bool atkbd_terminal; module_param_named(terminal, atkbd_terminal, bool, 0); MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); -#define MAX_FUNCTION_ROW_KEYS 24 - #define SCANCODE(keymap) ((keymap >> 16) & 0xFFFF) #define KEYCODE(keymap) (keymap & 0xFFFF) @@ -237,8 +236,7 @@ struct atkbd { /* Serializes reconnect(), attr->set() and event work */ struct mutex mutex; - u32 function_row_physmap[MAX_FUNCTION_ROW_KEYS]; - int num_function_row_keys; + struct vivaldi_data vdata; }; /* @@ -308,17 +306,7 @@ static struct attribute *atkbd_attributes[] = { static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf) { - ssize_t size = 0; - int i; - - if (!atkbd->num_function_row_keys) - return 0; - - for (i = 0; i < atkbd->num_function_row_keys; i++) - size += scnprintf(buf + size, PAGE_SIZE - size, "%02X ", - atkbd->function_row_physmap[i]); - size += scnprintf(buf + size, PAGE_SIZE - size, "\n"); - return size; + return vivaldi_function_row_physmap_show(&atkbd->vdata, buf); } static umode_t atkbd_attr_is_visible(struct kobject *kobj, @@ -329,7 +317,7 @@ static umode_t atkbd_attr_is_visible(struct kobject *kobj, struct atkbd *atkbd = serio_get_drvdata(serio); if (attr == &atkbd_attr_function_row_physmap.attr && - !atkbd->num_function_row_keys) + !atkbd->vdata.num_function_row_keys) return 0; return attr->mode; @@ -1206,10 +1194,11 @@ static void atkbd_parse_fwnode_data(struct serio *serio) /* Parse "function-row-physmap" property */ n = device_property_count_u32(dev, "function-row-physmap"); - if (n > 0 && n <= MAX_FUNCTION_ROW_KEYS && + if (n > 0 && n <= VIVALDI_MAX_FUNCTION_ROW_KEYS && !device_property_read_u32_array(dev, "function-row-physmap", - atkbd->function_row_physmap, n)) { - atkbd->num_function_row_keys = n; + atkbd->vdata.function_row_physmap, + n)) { + atkbd->vdata.num_function_row_keys = n; dev_dbg(dev, "FW reported %d function-row key locations\n", n); } } diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index fc02c540636e..6534dfca60b4 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/input/vivaldi-fmap.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/notifier.h> @@ -27,8 +28,6 @@ #include <asm/unaligned.h> -#define MAX_NUM_TOP_ROW_KEYS 15 - /** * struct cros_ec_keyb - Structure representing EC keyboard device * @@ -44,9 +43,7 @@ * @idev: The input device for the matrix keys. * @bs_idev: The input device for non-matrix buttons and switches (or NULL). * @notifier: interrupt event notifier for transport devices - * @function_row_physmap: An array of the encoded rows/columns for the top - * row function keys, in an order from left to right - * @num_function_row_keys: The number of top row keys in a custom keyboard + * @vdata: vivaldi function row data */ struct cros_ec_keyb { unsigned int rows; @@ -64,8 +61,7 @@ struct cros_ec_keyb { struct input_dev *bs_idev; struct notifier_block notifier; - u16 function_row_physmap[MAX_NUM_TOP_ROW_KEYS]; - size_t num_function_row_keys; + struct vivaldi_data vdata; }; /** @@ -537,9 +533,9 @@ static int cros_ec_keyb_register_matrix(struct cros_ec_keyb *ckdev) int err; struct property *prop; const __be32 *p; - u16 *physmap; + u32 *physmap; u32 key_pos; - int row, col; + unsigned int row, col, scancode, n_physmap; err = matrix_keypad_parse_properties(dev, &ckdev->rows, &ckdev->cols); if (err) @@ -591,20 +587,21 @@ static int cros_ec_keyb_register_matrix(struct cros_ec_keyb *ckdev) ckdev->idev = idev; cros_ec_keyb_compute_valid_keys(ckdev); - physmap = ckdev->function_row_physmap; + physmap = ckdev->vdata.function_row_physmap; + n_physmap = 0; of_property_for_each_u32(dev->of_node, "function-row-physmap", prop, p, key_pos) { - if (ckdev->num_function_row_keys == MAX_NUM_TOP_ROW_KEYS) { + if (n_physmap == VIVALDI_MAX_FUNCTION_ROW_KEYS) { dev_warn(dev, "Only support up to %d top row keys\n", - MAX_NUM_TOP_ROW_KEYS); + VIVALDI_MAX_FUNCTION_ROW_KEYS); break; } row = KEY_ROW(key_pos); col = KEY_COL(key_pos); - *physmap = MATRIX_SCAN_CODE(row, col, ckdev->row_shift); - physmap++; - ckdev->num_function_row_keys++; + scancode = MATRIX_SCAN_CODE(row, col, ckdev->row_shift); + physmap[n_physmap++] = scancode; } + ckdev->vdata.num_function_row_keys = n_physmap; err = input_register_device(ckdev->idev); if (err) { @@ -619,18 +616,10 @@ static ssize_t function_row_physmap_show(struct device *dev, struct device_attribute *attr, char *buf) { - ssize_t size = 0; - int i; - struct cros_ec_keyb *ckdev = dev_get_drvdata(dev); - u16 *physmap = ckdev->function_row_physmap; - - for (i = 0; i < ckdev->num_function_row_keys; i++) - size += scnprintf(buf + size, PAGE_SIZE - size, - "%s%02X", size ? " " : "", physmap[i]); - if (size) - size += scnprintf(buf + size, PAGE_SIZE - size, "\n"); + const struct cros_ec_keyb *ckdev = dev_get_drvdata(dev); + const struct vivaldi_data *data = &ckdev->vdata; - return size; + return vivaldi_function_row_physmap_show(data, buf); } static DEVICE_ATTR_RO(function_row_physmap); @@ -648,7 +637,7 @@ static umode_t cros_ec_keyb_attr_is_visible(struct kobject *kobj, struct cros_ec_keyb *ckdev = dev_get_drvdata(dev); if (attr == &dev_attr_function_row_physmap.attr && - !ckdev->num_function_row_keys) + !ckdev->vdata.num_function_row_keys) return 0; return attr->mode; diff --git a/drivers/input/keyboard/mt6779-keypad.c b/drivers/input/keyboard/mt6779-keypad.c new file mode 100644 index 000000000000..0dbbddc7f298 --- /dev/null +++ b/drivers/input/keyboard/mt6779-keypad.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 MediaTek Inc. + * Author Fengping Yu <fengping.yu@mediatek.com> + */ +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/input/matrix_keypad.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define MTK_KPD_NAME "mt6779-keypad" +#define MTK_KPD_MEM 0x0004 +#define MTK_KPD_DEBOUNCE 0x0018 +#define MTK_KPD_DEBOUNCE_MASK GENMASK(13, 0) +#define MTK_KPD_DEBOUNCE_MAX_MS 256 +#define MTK_KPD_NUM_MEMS 5 +#define MTK_KPD_NUM_BITS 136 /* 4*32+8 MEM5 only use 8 BITS */ + +struct mt6779_keypad { + struct regmap *regmap; + struct input_dev *input_dev; + struct clk *clk; + void __iomem *base; + u32 n_rows; + u32 n_cols; + DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS); +}; + +static const struct regmap_config mt6779_keypad_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = sizeof(u32), + .max_register = 36, +}; + +static irqreturn_t mt6779_keypad_irq_handler(int irq, void *dev_id) +{ + struct mt6779_keypad *keypad = dev_id; + const unsigned short *keycode = keypad->input_dev->keycode; + DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS); + DECLARE_BITMAP(change, MTK_KPD_NUM_BITS); + unsigned int bit_nr; + unsigned int row, col; + unsigned int scancode; + unsigned int row_shift = get_count_order(keypad->n_cols); + bool pressed; + + regmap_bulk_read(keypad->regmap, MTK_KPD_MEM, + new_state, MTK_KPD_NUM_MEMS); + + bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS); + + for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) { + /* + * Registers are 32bits, but only bits [15:0] are used to + * indicate key status. + */ + if (bit_nr % 32 >= 16) + continue; + + row = bit_nr / 32; + col = bit_nr % 32; + scancode = MATRIX_SCAN_CODE(row, col, row_shift); + /* 1: not pressed, 0: pressed */ + pressed = !test_bit(bit_nr, new_state); + dev_dbg(&keypad->input_dev->dev, "%s", + pressed ? "pressed" : "released"); + + input_event(keypad->input_dev, EV_MSC, MSC_SCAN, scancode); + input_report_key(keypad->input_dev, keycode[scancode], pressed); + input_sync(keypad->input_dev); + + dev_dbg(&keypad->input_dev->dev, + "report Linux keycode = %d\n", keycode[scancode]); + } + + bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS); + + return IRQ_HANDLED; +} + +static void mt6779_keypad_clk_disable(void *data) +{ + clk_disable_unprepare(data); +} + +static int mt6779_keypad_pdrv_probe(struct platform_device *pdev) +{ + struct mt6779_keypad *keypad; + int irq; + u32 debounce; + bool wakeup; + int error; + + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + keypad->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(keypad->base)) + return PTR_ERR(keypad->base); + + keypad->regmap = devm_regmap_init_mmio(&pdev->dev, keypad->base, + &mt6779_keypad_regmap_cfg); + if (IS_ERR(keypad->regmap)) { + dev_err(&pdev->dev, + "regmap init failed:%pe\n", keypad->regmap); + return PTR_ERR(keypad->regmap); + } + + bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS); + + keypad->input_dev = devm_input_allocate_device(&pdev->dev); + if (!keypad->input_dev) { + dev_err(&pdev->dev, "Failed to allocate input dev\n"); + return -ENOMEM; + } + + keypad->input_dev->name = MTK_KPD_NAME; + keypad->input_dev->id.bustype = BUS_HOST; + + error = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows, + &keypad->n_cols); + if (error) { + dev_err(&pdev->dev, "Failed to parse keypad params\n"); + return error; + } + + if (device_property_read_u32(&pdev->dev, "debounce-delay-ms", + &debounce)) + debounce = 16; + + if (debounce > MTK_KPD_DEBOUNCE_MAX_MS) { + dev_err(&pdev->dev, + "Debounce time exceeds the maximum allowed time %dms\n", + MTK_KPD_DEBOUNCE_MAX_MS); + return -EINVAL; + } + + wakeup = device_property_read_bool(&pdev->dev, "wakeup-source"); + + dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n", + keypad->n_rows, keypad->n_cols, debounce); + + error = matrix_keypad_build_keymap(NULL, NULL, + keypad->n_rows, keypad->n_cols, + NULL, keypad->input_dev); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + return error; + } + + input_set_capability(keypad->input_dev, EV_MSC, MSC_SCAN); + + regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE, + (debounce * (1 << 5)) & MTK_KPD_DEBOUNCE_MASK); + + keypad->clk = devm_clk_get(&pdev->dev, "kpd"); + if (IS_ERR(keypad->clk)) + return PTR_ERR(keypad->clk); + + error = clk_prepare_enable(keypad->clk); + if (error) { + dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n"); + return error; + } + + error = devm_add_action_or_reset(&pdev->dev, mt6779_keypad_clk_disable, + keypad->clk); + if (error) + return error; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + error = devm_request_threaded_irq(&pdev->dev, irq, + NULL, mt6779_keypad_irq_handler, + IRQF_ONESHOT, MTK_KPD_NAME, keypad); + if (error) { + dev_err(&pdev->dev, "Failed to request IRQ#%d: %d\n", + irq, error); + return error; + } + + error = input_register_device(keypad->input_dev); + if (error) { + dev_err(&pdev->dev, "Failed to register device\n"); + return error; + } + + error = device_init_wakeup(&pdev->dev, wakeup); + if (error) + dev_warn(&pdev->dev, "device_init_wakeup() failed: %d\n", + error); + + return 0; +} + +static const struct of_device_id mt6779_keypad_of_match[] = { + { .compatible = "mediatek,mt6779-keypad" }, + { .compatible = "mediatek,mt6873-keypad" }, + { /* sentinel */ } +}; + +static struct platform_driver mt6779_keypad_pdrv = { + .probe = mt6779_keypad_pdrv_probe, + .driver = { + .name = MTK_KPD_NAME, + .of_match_table = mt6779_keypad_of_match, + }, +}; +module_platform_driver(mt6779_keypad_pdrv); + +MODULE_AUTHOR("Mediatek Corporation"); +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c index 62391d6c7da6..c31ab4368388 100644 --- a/drivers/input/keyboard/mtk-pmic-keys.c +++ b/drivers/input/keyboard/mtk-pmic-keys.c @@ -9,6 +9,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/mt6323/registers.h> +#include <linux/mfd/mt6358/registers.h> #include <linux/mfd/mt6397/core.h> #include <linux/mfd/mt6397/registers.h> #include <linux/module.h> @@ -74,11 +75,22 @@ static const struct mtk_pmic_regs mt6323_regs = { .pmic_rst_reg = MT6323_TOP_RST_MISC, }; +static const struct mtk_pmic_regs mt6358_regs = { + .keys_regs[MTK_PMIC_PWRKEY_INDEX] = + MTK_PMIC_KEYS_REGS(MT6358_TOPSTATUS, + 0x2, MT6358_PSC_TOP_INT_CON0, 0x5), + .keys_regs[MTK_PMIC_HOMEKEY_INDEX] = + MTK_PMIC_KEYS_REGS(MT6358_TOPSTATUS, + 0x8, MT6358_PSC_TOP_INT_CON0, 0xa), + .pmic_rst_reg = MT6358_TOP_RST_MISC, +}; + struct mtk_pmic_keys_info { struct mtk_pmic_keys *keys; const struct mtk_pmic_keys_regs *regs; unsigned int keycode; int irq; + int irq_r; /* optional: release irq if different */ bool wakeup:1; }; @@ -188,6 +200,18 @@ static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys, return ret; } + if (info->irq_r > 0) { + ret = devm_request_threaded_irq(keys->dev, info->irq_r, NULL, + mtk_pmic_keys_irq_handler_thread, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + "mtk-pmic-keys", info); + if (ret) { + dev_err(keys->dev, "Failed to request IRQ_r: %d: %d\n", + info->irq, ret); + return ret; + } + } + input_set_capability(keys->input_dev, EV_KEY, info->keycode); return 0; @@ -199,8 +223,11 @@ static int __maybe_unused mtk_pmic_keys_suspend(struct device *dev) int index; for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) { - if (keys->keys[index].wakeup) + if (keys->keys[index].wakeup) { enable_irq_wake(keys->keys[index].irq); + if (keys->keys[index].irq_r > 0) + enable_irq_wake(keys->keys[index].irq_r); + } } return 0; @@ -212,8 +239,11 @@ static int __maybe_unused mtk_pmic_keys_resume(struct device *dev) int index; for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) { - if (keys->keys[index].wakeup) + if (keys->keys[index].wakeup) { disable_irq_wake(keys->keys[index].irq); + if (keys->keys[index].irq_r > 0) + disable_irq_wake(keys->keys[index].irq_r); + } } return 0; @@ -230,6 +260,9 @@ static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = { .compatible = "mediatek,mt6323-keys", .data = &mt6323_regs, }, { + .compatible = "mediatek,mt6358-keys", + .data = &mt6358_regs, + }, { /* sentinel */ } }; @@ -241,6 +274,8 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) unsigned int keycount; struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent); struct device_node *node = pdev->dev.of_node, *child; + static const char *const irqnames[] = { "powerkey", "homekey" }; + static const char *const irqnames_r[] = { "powerkey_r", "homekey_r" }; struct mtk_pmic_keys *keys; const struct mtk_pmic_regs *mtk_pmic_regs; struct input_dev *input_dev; @@ -268,7 +303,8 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) input_dev->id.version = 0x0001; keycount = of_get_available_child_count(node); - if (keycount > MTK_PMIC_MAX_KEY_COUNT) { + if (keycount > MTK_PMIC_MAX_KEY_COUNT || + keycount > ARRAY_SIZE(irqnames)) { dev_err(keys->dev, "too many keys defined (%d)\n", keycount); return -EINVAL; } @@ -276,12 +312,23 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev) for_each_child_of_node(node, child) { keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index]; - keys->keys[index].irq = platform_get_irq(pdev, index); + keys->keys[index].irq = + platform_get_irq_byname(pdev, irqnames[index]); if (keys->keys[index].irq < 0) { of_node_put(child); return keys->keys[index].irq; } + if (of_device_is_compatible(node, "mediatek,mt6358-keys")) { + keys->keys[index].irq_r = platform_get_irq_byname(pdev, + irqnames_r[index]); + + if (keys->keys[index].irq_r < 0) { + of_node_put(child); + return keys->keys[index].irq_r; + } + } + error = of_property_read_u32(child, "linux,keycodes", &keys->keys[index].keycode); if (error) { diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c index 79851923ee57..b14a389600c9 100644 --- a/drivers/input/misc/da9063_onkey.c +++ b/drivers/input/misc/da9063_onkey.c @@ -4,6 +4,7 @@ * Copyright (C) 2015 Dialog Semiconductor Ltd. */ +#include <linux/devm-helpers.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/input.h> @@ -182,13 +183,6 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, void *data) return IRQ_HANDLED; } -static void da9063_cancel_poll(void *data) -{ - struct da9063_onkey *onkey = data; - - cancel_delayed_work_sync(&onkey->work); -} - static int da9063_onkey_probe(struct platform_device *pdev) { struct da9063_onkey *onkey; @@ -234,9 +228,8 @@ static int da9063_onkey_probe(struct platform_device *pdev) input_set_capability(onkey->input, EV_KEY, KEY_POWER); - INIT_DELAYED_WORK(&onkey->work, da9063_poll_on); - - error = devm_add_action(&pdev->dev, da9063_cancel_poll, onkey); + error = devm_delayed_work_autocancel(&pdev->dev, &onkey->work, + da9063_poll_on); if (error) { dev_err(&pdev->dev, "Failed to add cancel poll action: %d\n", diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index ffad142801b3..434d48ae4b12 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -186,6 +186,7 @@ static const char * const smbus_pnp_ids[] = { "LEN2044", /* L470 */ "LEN2054", /* E480 */ "LEN2055", /* E580 */ + "LEN2064", /* T14 Gen 1 AMD / P14s Gen 1 AMD */ "LEN2068", /* T14 Gen 1 */ "SYN3052", /* HP EliteBook 840 G4 */ "SYN3221", /* HP 15-ay000 */ diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c index 8970b49ea09a..9b02dd5dd2b9 100644 --- a/drivers/input/serio/ps2-gpio.c +++ b/drivers/input/serio/ps2-gpio.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/jiffies.h> #include <linux/delay.h> +#include <linux/timekeeping.h> #define DRIVER_NAME "ps2-gpio" @@ -36,14 +37,37 @@ #define PS2_DATA_BIT7 8 #define PS2_PARITY_BIT 9 #define PS2_STOP_BIT 10 -#define PS2_TX_TIMEOUT 11 -#define PS2_ACK_BIT 12 +#define PS2_ACK_BIT 11 #define PS2_DEV_RET_ACK 0xfa #define PS2_DEV_RET_NACK 0xfe #define PS2_CMD_RESEND 0xfe +/* + * The PS2 protocol specifies a clock frequency between 10kHz and 16.7kHz, + * therefore the maximal interrupt interval should be 100us and the minimum + * interrupt interval should be ~60us. Let's allow +/- 20us for frequency + * deviations and interrupt latency. + * + * The data line must be samples after ~30us to 50us after the falling edge, + * since the device updates the data line at the rising edge. + * + * ___ ______ ______ ______ ___ + * \ / \ / \ / \ / + * \ / \ / \ / \ / + * \______/ \______/ \______/ \______/ + * + * |-----------------| |--------| + * 60us/100us 30us/50us + */ +#define PS2_CLK_FREQ_MIN_HZ 10000 +#define PS2_CLK_FREQ_MAX_HZ 16700 +#define PS2_CLK_MIN_INTERVAL_US ((1000 * 1000) / PS2_CLK_FREQ_MAX_HZ) +#define PS2_CLK_MAX_INTERVAL_US ((1000 * 1000) / PS2_CLK_FREQ_MIN_HZ) +#define PS2_IRQ_MIN_INTERVAL_US (PS2_CLK_MIN_INTERVAL_US - 20) +#define PS2_IRQ_MAX_INTERVAL_US (PS2_CLK_MAX_INTERVAL_US + 20) + struct ps2_gpio_data { struct device *dev; struct serio *serio; @@ -52,19 +76,30 @@ struct ps2_gpio_data { struct gpio_desc *gpio_data; bool write_enable; int irq; - unsigned char rx_cnt; - unsigned char rx_byte; - unsigned char tx_cnt; - unsigned char tx_byte; - struct completion tx_done; - struct mutex tx_mutex; - struct delayed_work tx_work; + ktime_t t_irq_now; + ktime_t t_irq_last; + struct { + unsigned char cnt; + unsigned char byte; + } rx; + struct { + unsigned char cnt; + unsigned char byte; + ktime_t t_xfer_start; + ktime_t t_xfer_end; + struct completion complete; + struct mutex mutex; + struct delayed_work work; + } tx; }; static int ps2_gpio_open(struct serio *serio) { struct ps2_gpio_data *drvdata = serio->port_data; + drvdata->t_irq_last = 0; + drvdata->tx.t_xfer_end = 0; + enable_irq(drvdata->irq); return 0; } @@ -73,7 +108,7 @@ static void ps2_gpio_close(struct serio *serio) { struct ps2_gpio_data *drvdata = serio->port_data; - flush_delayed_work(&drvdata->tx_work); + flush_delayed_work(&drvdata->tx.work); disable_irq(drvdata->irq); } @@ -85,9 +120,9 @@ static int __ps2_gpio_write(struct serio *serio, unsigned char val) gpiod_direction_output(drvdata->gpio_clk, 0); drvdata->mode = PS2_MODE_TX; - drvdata->tx_byte = val; + drvdata->tx.byte = val; - schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200)); + schedule_delayed_work(&drvdata->tx.work, usecs_to_jiffies(200)); return 0; } @@ -98,12 +133,12 @@ static int ps2_gpio_write(struct serio *serio, unsigned char val) int ret = 0; if (in_task()) { - mutex_lock(&drvdata->tx_mutex); + mutex_lock(&drvdata->tx.mutex); __ps2_gpio_write(serio, val); - if (!wait_for_completion_timeout(&drvdata->tx_done, + if (!wait_for_completion_timeout(&drvdata->tx.complete, msecs_to_jiffies(10000))) ret = SERIO_TIMEOUT; - mutex_unlock(&drvdata->tx_mutex); + mutex_unlock(&drvdata->tx.mutex); } else { __ps2_gpio_write(serio, val); } @@ -115,9 +150,10 @@ static void ps2_gpio_tx_work_fn(struct work_struct *work) { struct delayed_work *dwork = to_delayed_work(work); struct ps2_gpio_data *drvdata = container_of(dwork, - struct ps2_gpio_data, - tx_work); + struct ps2_gpio_data, + tx.work); + drvdata->tx.t_xfer_start = ktime_get(); enable_irq(drvdata->irq); gpiod_direction_output(drvdata->gpio_data, 0); gpiod_direction_input(drvdata->gpio_clk); @@ -128,20 +164,31 @@ static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) unsigned char byte, cnt; int data; int rxflags = 0; - static unsigned long old_jiffies; + s64 us_delta; - byte = drvdata->rx_byte; - cnt = drvdata->rx_cnt; + byte = drvdata->rx.byte; + cnt = drvdata->rx.cnt; - if (old_jiffies == 0) - old_jiffies = jiffies; + drvdata->t_irq_now = ktime_get(); + + /* + * We need to consider spurious interrupts happening right after + * a TX xfer finished. + */ + us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->tx.t_xfer_end); + if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) + goto end; - if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { + us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last); + if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt) { dev_err(drvdata->dev, "RX: timeout, probably we missed an interrupt\n"); goto err; + } else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) { + /* Ignore spurious IRQs. */ + goto end; } - old_jiffies = jiffies; + drvdata->t_irq_last = drvdata->t_irq_now; data = gpiod_get_value(drvdata->gpio_data); if (unlikely(data < 0)) { @@ -178,8 +225,16 @@ static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) if (!drvdata->write_enable) goto err; } + break; + case PS2_STOP_BIT: + /* stop bit should be high */ + if (unlikely(!data)) { + dev_err(drvdata->dev, "RX: stop bit should be high\n"); + goto err; + } - /* Do not send spurious ACK's and NACK's when write fn is + /* + * Do not send spurious ACK's and NACK's when write fn is * not provided. */ if (!drvdata->write_enable) { @@ -189,23 +244,11 @@ static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) break; } - /* Let's send the data without waiting for the stop bit to be - * sent. It may happen that we miss the stop bit. When this - * happens we have no way to recover from this, certainly - * missing the parity bit would be recognized when processing - * the stop bit. When missing both, data is lost. - */ serio_interrupt(drvdata->serio, byte, rxflags); dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte); - break; - case PS2_STOP_BIT: - /* stop bit should be high */ - if (unlikely(!data)) { - dev_err(drvdata->dev, "RX: stop bit should be high\n"); - goto err; - } + cnt = byte = 0; - old_jiffies = 0; + goto end; /* success */ default: dev_err(drvdata->dev, "RX: got out of sync with the device\n"); @@ -217,11 +260,10 @@ static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) err: cnt = byte = 0; - old_jiffies = 0; __ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND); end: - drvdata->rx_cnt = cnt; - drvdata->rx_byte = byte; + drvdata->rx.cnt = cnt; + drvdata->rx.byte = byte; return IRQ_HANDLED; } @@ -229,20 +271,34 @@ static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) { unsigned char byte, cnt; int data; - static unsigned long old_jiffies; + s64 us_delta; + + cnt = drvdata->tx.cnt; + byte = drvdata->tx.byte; - cnt = drvdata->tx_cnt; - byte = drvdata->tx_byte; + drvdata->t_irq_now = ktime_get(); - if (old_jiffies == 0) - old_jiffies = jiffies; + /* + * There might be pending IRQs since we disabled IRQs in + * __ps2_gpio_write(). We can expect at least one clock period until + * the device generates the first falling edge after releasing the + * clock line. + */ + us_delta = ktime_us_delta(drvdata->t_irq_now, + drvdata->tx.t_xfer_start); + if (unlikely(us_delta < PS2_CLK_MIN_INTERVAL_US)) + goto end; - if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { + us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last); + if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt > 1) { dev_err(drvdata->dev, "TX: timeout, probably we missed an interrupt\n"); goto err; + } else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) { + /* Ignore spurious IRQs. */ + goto end; } - old_jiffies = jiffies; + drvdata->t_irq_last = drvdata->t_irq_now; switch (cnt) { case PS2_START_BIT: @@ -270,27 +326,22 @@ static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) /* release data line to generate stop bit */ gpiod_direction_input(drvdata->gpio_data); break; - case PS2_TX_TIMEOUT: - /* Devices generate one extra clock pulse before sending the - * acknowledgment. - */ - break; case PS2_ACK_BIT: - gpiod_direction_input(drvdata->gpio_data); data = gpiod_get_value(drvdata->gpio_data); if (data) { dev_warn(drvdata->dev, "TX: received NACK, retry\n"); goto err; } + drvdata->tx.t_xfer_end = ktime_get(); drvdata->mode = PS2_MODE_RX; - complete(&drvdata->tx_done); + complete(&drvdata->tx.complete); cnt = 1; - old_jiffies = 0; goto end; /* success */ default: - /* Probably we missed the stop bit. Therefore we release data + /* + * Probably we missed the stop bit. Therefore we release data * line and try again. */ gpiod_direction_input(drvdata->gpio_data); @@ -303,11 +354,10 @@ static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) err: cnt = 1; - old_jiffies = 0; gpiod_direction_input(drvdata->gpio_data); - __ps2_gpio_write(drvdata->serio, drvdata->tx_byte); + __ps2_gpio_write(drvdata->serio, drvdata->tx.byte); end: - drvdata->tx_cnt = cnt; + drvdata->tx.cnt = cnt; return IRQ_HANDLED; } @@ -322,14 +372,19 @@ static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) static int ps2_gpio_get_props(struct device *dev, struct ps2_gpio_data *drvdata) { - drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); + enum gpiod_flags gflags; + + /* Enforce open drain, since this is required by the PS/2 bus. */ + gflags = GPIOD_IN | GPIOD_FLAGS_BIT_OPEN_DRAIN; + + drvdata->gpio_data = devm_gpiod_get(dev, "data", gflags); if (IS_ERR(drvdata->gpio_data)) { dev_err(dev, "failed to request data gpio: %ld", PTR_ERR(drvdata->gpio_data)); return PTR_ERR(drvdata->gpio_data); } - drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); + drvdata->gpio_clk = devm_gpiod_get(dev, "clk", gflags); if (IS_ERR(drvdata->gpio_clk)) { dev_err(dev, "failed to request clock gpio: %ld", PTR_ERR(drvdata->gpio_clk)); @@ -387,7 +442,8 @@ static int ps2_gpio_probe(struct platform_device *pdev) serio->id.type = SERIO_8042; serio->open = ps2_gpio_open; serio->close = ps2_gpio_close; - /* Write can be enabled in platform/dt data, but possibly it will not + /* + * Write can be enabled in platform/dt data, but possibly it will not * work because of the tough timings. */ serio->write = drvdata->write_enable ? ps2_gpio_write : NULL; @@ -400,14 +456,15 @@ static int ps2_gpio_probe(struct platform_device *pdev) drvdata->dev = dev; drvdata->mode = PS2_MODE_RX; - /* Tx count always starts at 1, as the start bit is sent implicitly by + /* + * Tx count always starts at 1, as the start bit is sent implicitly by * host-to-device communication initialization. */ - drvdata->tx_cnt = 1; + drvdata->tx.cnt = 1; - INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn); - init_completion(&drvdata->tx_done); - mutex_init(&drvdata->tx_mutex); + INIT_DELAYED_WORK(&drvdata->tx.work, ps2_gpio_tx_work_fn); + init_completion(&drvdata->tx.complete); + mutex_init(&drvdata->tx.mutex); serio_register_port(serio); platform_set_drvdata(pdev, drvdata); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2f6adfb7b938..f1414f0ad7af 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -638,6 +638,16 @@ config TOUCHSCREEN_MTOUCH To compile this driver as a module, choose M here: the module will be called mtouch. +config TOUCHSCREEN_IMAGIS + tristate "Imagis touchscreen support" + depends on I2C + help + Say Y here if you have an Imagis IST30xxC touchscreen. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called imagis. + config TOUCHSCREEN_IMX6UL_TSC tristate "Freescale i.MX6UL touchscreen controller" depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 39a8127cf6a5..557f84fd2075 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o +obj-$(CONFIG_TOUCHSCREEN_IMAGIS) += imagis.o obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 752e8ba4fecb..3ad9870db108 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -298,32 +298,17 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) return -ENOMSG; } -static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) +static int goodix_create_pen_input(struct goodix_ts_data *ts) { struct device *dev = &ts->client->dev; struct input_dev *input; input = devm_input_allocate_device(dev); if (!input) - return NULL; - - input_alloc_absinfo(input); - if (!input->absinfo) { - input_free_device(input); - return NULL; - } - - input->absinfo[ABS_X] = ts->input_dev->absinfo[ABS_MT_POSITION_X]; - input->absinfo[ABS_Y] = ts->input_dev->absinfo[ABS_MT_POSITION_Y]; - __set_bit(ABS_X, input->absbit); - __set_bit(ABS_Y, input->absbit); - input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + return -ENOMEM; - input_set_capability(input, EV_KEY, BTN_TOUCH); - input_set_capability(input, EV_KEY, BTN_TOOL_PEN); - input_set_capability(input, EV_KEY, BTN_STYLUS); - input_set_capability(input, EV_KEY, BTN_STYLUS2); - __set_bit(INPUT_PROP_DIRECT, input->propbit); + input_copy_abs(input, ABS_X, ts->input_dev, ABS_MT_POSITION_X); + input_copy_abs(input, ABS_Y, ts->input_dev, ABS_MT_POSITION_Y); /* * The resolution of these touchscreens is about 10 units/mm, the actual * resolution does not matter much since we set INPUT_PROP_DIRECT. @@ -331,6 +316,13 @@ static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) */ input_abs_set_res(input, ABS_X, 10); input_abs_set_res(input, ABS_Y, 10); + input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_STYLUS2); + __set_bit(INPUT_PROP_DIRECT, input->propbit); input->name = "Goodix Active Pen"; input->phys = "input/pen"; @@ -340,25 +332,23 @@ static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) input->id.product = 0x1001; input->id.version = ts->version; - if (input_register_device(input) != 0) { - input_free_device(input); - return NULL; - } - - return input; + ts->input_pen = input; + return 0; } static void goodix_ts_report_pen_down(struct goodix_ts_data *ts, u8 *data) { - int input_x, input_y, input_w; + int input_x, input_y, input_w, error; u8 key_value; - if (!ts->input_pen) { - ts->input_pen = goodix_create_pen_input(ts); - if (!ts->input_pen) - return; + if (!ts->pen_input_registered) { + error = input_register_device(ts->input_pen); + ts->pen_input_registered = (error == 0) ? 1 : error; } + if (ts->pen_input_registered < 0) + return; + if (ts->contact_size == 9) { input_x = get_unaligned_le16(&data[4]); input_y = get_unaligned_le16(&data[6]); @@ -1215,6 +1205,17 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) return error; } + /* + * Create the input_pen device before goodix_request_irq() calls + * devm_request_threaded_irq() so that the devm framework frees + * it after disabling the irq. + * Unfortunately there is no way to detect if the touchscreen has pen + * support, so registering the dev is delayed till the first pen event. + */ + error = goodix_create_pen_input(ts); + if (error) + return error; + ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; error = goodix_request_irq(ts); if (error) { diff --git a/drivers/input/touchscreen/goodix.h b/drivers/input/touchscreen/goodix.h index fa8602e78a64..87797cc88b32 100644 --- a/drivers/input/touchscreen/goodix.h +++ b/drivers/input/touchscreen/goodix.h @@ -94,6 +94,7 @@ struct goodix_ts_data { u16 version; bool reset_controller_at_probe; bool load_cfg_from_disk; + int pen_input_registered; struct completion firmware_loading_complete; unsigned long irq_flags; enum goodix_irq_pin_access_method irq_pin_access_method; diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c new file mode 100644 index 000000000000..e2697e6c6d2a --- /dev/null +++ b/drivers/input/touchscreen/imagis.c @@ -0,0 +1,367 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> + +#define IST3038C_HIB_ACCESS (0x800B << 16) +#define IST3038C_DIRECT_ACCESS BIT(31) +#define IST3038C_REG_CHIPID 0x40001000 +#define IST3038C_REG_HIB_BASE 0x30000100 +#define IST3038C_REG_TOUCH_STATUS (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS) +#define IST3038C_REG_TOUCH_COORD (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8) +#define IST3038C_REG_INTR_MESSAGE (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x4) +#define IST3038C_WHOAMI 0x38c +#define IST3038C_CHIP_ON_DELAY_MS 60 +#define IST3038C_I2C_RETRY_COUNT 3 +#define IST3038C_MAX_FINGER_NUM 10 +#define IST3038C_X_MASK GENMASK(23, 12) +#define IST3038C_X_SHIFT 12 +#define IST3038C_Y_MASK GENMASK(11, 0) +#define IST3038C_AREA_MASK GENMASK(27, 24) +#define IST3038C_AREA_SHIFT 24 +#define IST3038C_FINGER_COUNT_MASK GENMASK(15, 12) +#define IST3038C_FINGER_COUNT_SHIFT 12 +#define IST3038C_FINGER_STATUS_MASK GENMASK(9, 0) + +struct imagis_ts { + struct i2c_client *client; + struct input_dev *input_dev; + struct touchscreen_properties prop; + struct regulator_bulk_data supplies[2]; +}; + +static int imagis_i2c_read_reg(struct imagis_ts *ts, + unsigned int reg, u32 *data) +{ + __be32 ret_be; + __be32 reg_be = cpu_to_be32(reg); + struct i2c_msg msg[] = { + { + .addr = ts->client->addr, + .flags = 0, + .buf = (unsigned char *)®_be, + .len = sizeof(reg_be), + }, { + .addr = ts->client->addr, + .flags = I2C_M_RD, + .buf = (unsigned char *)&ret_be, + .len = sizeof(ret_be), + }, + }; + int ret, error; + int retry = IST3038C_I2C_RETRY_COUNT; + + /* Retry in case the controller fails to respond */ + do { + ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg)); + if (ret == ARRAY_SIZE(msg)) { + *data = be32_to_cpu(ret_be); + return 0; + } + + error = ret < 0 ? ret : -EIO; + dev_err(&ts->client->dev, + "%s - i2c_transfer failed: %d (%d)\n", + __func__, error, ret); + } while (--retry); + + return error; +} + +static irqreturn_t imagis_interrupt(int irq, void *dev_id) +{ + struct imagis_ts *ts = dev_id; + u32 intr_message, finger_status; + unsigned int finger_count, finger_pressed; + int i; + int error; + + error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE, + &intr_message); + if (error) { + dev_err(&ts->client->dev, + "failed to read the interrupt message: %d\n", error); + goto out; + } + + finger_count = (intr_message & IST3038C_FINGER_COUNT_MASK) >> + IST3038C_FINGER_COUNT_SHIFT; + if (finger_count > IST3038C_MAX_FINGER_NUM) { + dev_err(&ts->client->dev, + "finger count %d is more than maximum supported\n", + finger_count); + goto out; + } + + finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK; + + for (i = 0; i < finger_count; i++) { + error = imagis_i2c_read_reg(ts, + IST3038C_REG_TOUCH_COORD + (i * 4), + &finger_status); + if (error) { + dev_err(&ts->client->dev, + "failed to read coordinates for finger %d: %d\n", + i, error); + goto out; + } + + input_mt_slot(ts->input_dev, i); + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, + finger_pressed & BIT(i)); + touchscreen_report_pos(ts->input_dev, &ts->prop, + (finger_status & IST3038C_X_MASK) >> + IST3038C_X_SHIFT, + finger_status & IST3038C_Y_MASK, 1); + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, + (finger_status & IST3038C_AREA_MASK) >> + IST3038C_AREA_SHIFT); + } + + input_mt_sync_frame(ts->input_dev); + input_sync(ts->input_dev); + +out: + return IRQ_HANDLED; +} + +static void imagis_power_off(void *_ts) +{ + struct imagis_ts *ts = _ts; + + regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies); +} + +static int imagis_power_on(struct imagis_ts *ts) +{ + int error; + + error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies); + if (error) + return error; + + msleep(IST3038C_CHIP_ON_DELAY_MS); + + return 0; +} + +static int imagis_start(struct imagis_ts *ts) +{ + int error; + + error = imagis_power_on(ts); + if (error) + return error; + + enable_irq(ts->client->irq); + + return 0; +} + +static int imagis_stop(struct imagis_ts *ts) +{ + disable_irq(ts->client->irq); + + imagis_power_off(ts); + + return 0; +} + +static int imagis_input_open(struct input_dev *dev) +{ + struct imagis_ts *ts = input_get_drvdata(dev); + + return imagis_start(ts); +} + +static void imagis_input_close(struct input_dev *dev) +{ + struct imagis_ts *ts = input_get_drvdata(dev); + + imagis_stop(ts); +} + +static int imagis_init_input_dev(struct imagis_ts *ts) +{ + struct input_dev *input_dev; + int error; + + input_dev = devm_input_allocate_device(&ts->client->dev); + if (!input_dev) + return -ENOMEM; + + ts->input_dev = input_dev; + + input_dev->name = "Imagis capacitive touchscreen"; + input_dev->phys = "input/ts"; + input_dev->id.bustype = BUS_I2C; + input_dev->open = imagis_input_open; + input_dev->close = imagis_input_close; + + input_set_drvdata(input_dev, ts); + + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + + touchscreen_parse_properties(input_dev, true, &ts->prop); + if (!ts->prop.max_x || !ts->prop.max_y) { + dev_err(&ts->client->dev, + "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n"); + return -EINVAL; + } + + error = input_mt_init_slots(input_dev, + IST3038C_MAX_FINGER_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&ts->client->dev, + "Failed to initialize MT slots: %d", error); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&ts->client->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + +static int imagis_init_regulators(struct imagis_ts *ts) +{ + struct i2c_client *client = ts->client; + + ts->supplies[0].supply = "vdd"; + ts->supplies[1].supply = "vddio"; + return devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(ts->supplies), + ts->supplies); +} + +static int imagis_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct imagis_ts *ts; + int chip_id, error; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->client = i2c; + + error = imagis_init_regulators(ts); + if (error) { + dev_err(dev, "regulator init error: %d\n", error); + return error; + } + + error = imagis_power_on(ts); + if (error) { + dev_err(dev, "failed to enable regulators: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(dev, imagis_power_off, ts); + if (error) { + dev_err(dev, "failed to install poweroff action: %d\n", error); + return error; + } + + error = imagis_i2c_read_reg(ts, + IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS, + &chip_id); + if (error) { + dev_err(dev, "chip ID read failure: %d\n", error); + return error; + } + + if (chip_id != IST3038C_WHOAMI) { + dev_err(dev, "unknown chip ID: 0x%x\n", chip_id); + return -EINVAL; + } + + error = devm_request_threaded_irq(dev, i2c->irq, + NULL, imagis_interrupt, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + "imagis-touchscreen", ts); + if (error) { + dev_err(dev, "IRQ %d allocation failure: %d\n", + i2c->irq, error); + return error; + } + + error = imagis_init_input_dev(ts); + if (error) + return error; + + return 0; +} + +static int __maybe_unused imagis_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct imagis_ts *ts = i2c_get_clientdata(client); + int retval = 0; + + mutex_lock(&ts->input_dev->mutex); + + if (input_device_enabled(ts->input_dev)) + retval = imagis_stop(ts); + + mutex_unlock(&ts->input_dev->mutex); + + return retval; +} + +static int __maybe_unused imagis_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct imagis_ts *ts = i2c_get_clientdata(client); + int retval = 0; + + mutex_lock(&ts->input_dev->mutex); + + if (input_device_enabled(ts->input_dev)) + retval = imagis_start(ts); + + mutex_unlock(&ts->input_dev->mutex); + + return retval; +} + +static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume); + +#ifdef CONFIG_OF +static const struct of_device_id imagis_of_match[] = { + { .compatible = "imagis,ist3038c", }, + { }, +}; +MODULE_DEVICE_TABLE(of, imagis_of_match); +#endif + +static struct i2c_driver imagis_ts_driver = { + .driver = { + .name = "imagis-touchscreen", + .pm = &imagis_pm_ops, + .of_match_table = of_match_ptr(imagis_of_match), + }, + .probe_new = imagis_probe, +}; + +module_i2c_driver(imagis_ts_driver); + +MODULE_DESCRIPTION("Imagis IST3038C Touchscreen Driver"); +MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c index b3fa71213d60..34c4cca57d13 100644 --- a/drivers/input/touchscreen/iqs5xx.c +++ b/drivers/input/touchscreen/iqs5xx.c @@ -486,11 +486,11 @@ static int iqs5xx_axis_init(struct i2c_client *client) { struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); struct touchscreen_properties *prop = &iqs5xx->prop; - struct input_dev *input; + struct input_dev *input = iqs5xx->input; u16 max_x, max_y; int error; - if (!iqs5xx->input) { + if (!input) { input = devm_input_allocate_device(&client->dev); if (!input) return -ENOMEM; @@ -512,11 +512,11 @@ static int iqs5xx_axis_init(struct i2c_client *client) if (error) return error; - input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_X, 0, max_x, 0, 0); - input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); - input_set_abs_params(iqs5xx->input, ABS_MT_PRESSURE, 0, U16_MAX, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, U16_MAX, 0, 0); - touchscreen_parse_properties(iqs5xx->input, true, prop); + touchscreen_parse_properties(input, true, prop); /* * The device reserves 0xFFFF for coordinates that correspond to slots @@ -540,7 +540,7 @@ static int iqs5xx_axis_init(struct i2c_client *client) return error; } - error = input_mt_init_slots(iqs5xx->input, IQS5XX_NUM_CONTACTS, + error = input_mt_init_slots(input, IQS5XX_NUM_CONTACTS, INPUT_MT_DIRECT); if (error) dev_err(&client->dev, "Failed to initialize slots: %d\n", @@ -674,7 +674,7 @@ static irqreturn_t iqs5xx_irq(int irq, void *data) input_mt_slot(input, i); if (input_mt_report_slot_state(input, MT_TOOL_FINGER, pressure != 0)) { - touchscreen_report_pos(iqs5xx->input, &iqs5xx->prop, + touchscreen_report_pos(input, &iqs5xx->prop, be16_to_cpu(touch_data->abs_x), be16_to_cpu(touch_data->abs_y), true); diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c index bc11203c9cf7..72e0b767e1ba 100644 --- a/drivers/input/touchscreen/stmfts.c +++ b/drivers/input/touchscreen/stmfts.c @@ -339,11 +339,11 @@ static int stmfts_input_open(struct input_dev *dev) err = pm_runtime_get_sync(&sdata->client->dev); if (err < 0) - return err; + goto out; err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_ON); if (err) - return err; + goto out; mutex_lock(&sdata->mutex); sdata->running = true; @@ -366,7 +366,9 @@ static int stmfts_input_open(struct input_dev *dev) "failed to enable touchkey\n"); } - return 0; +out: + pm_runtime_put_noidle(&sdata->client->dev); + return err; } static void stmfts_input_close(struct input_dev *dev) diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c index 27810f6c69f6..72c7258b93a5 100644 --- a/drivers/input/touchscreen/tsc200x-core.c +++ b/drivers/input/touchscreen/tsc200x-core.c @@ -88,6 +88,8 @@ struct tsc200x { int in_z1; int in_z2; + struct touchscreen_properties prop; + spinlock_t lock; struct timer_list penup_timer; @@ -113,8 +115,7 @@ static void tsc200x_update_pen_state(struct tsc200x *ts, int x, int y, int pressure) { if (pressure) { - input_report_abs(ts->idev, ABS_X, x); - input_report_abs(ts->idev, ABS_Y, y); + touchscreen_report_pos(ts->idev, &ts->prop, x, y, false); input_report_abs(ts->idev, ABS_PRESSURE, pressure); if (!ts->pen_down) { input_report_key(ts->idev, BTN_TOUCH, !!pressure); @@ -533,7 +534,7 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, TSC200X_DEF_P_FUZZ, 0); - touchscreen_parse_properties(input_dev, false, NULL); + touchscreen_parse_properties(input_dev, false, &ts->prop); /* Ensure the touchscreen is off */ tsc200x_stop_scan(ts); diff --git a/drivers/input/vivaldi-fmap.c b/drivers/input/vivaldi-fmap.c new file mode 100644 index 000000000000..6dae83d96806 --- /dev/null +++ b/drivers/input/vivaldi-fmap.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Helpers for ChromeOS Vivaldi keyboard function row mapping + * + * Copyright (C) 2022 Google, Inc + */ + +#include <linux/export.h> +#include <linux/input/vivaldi-fmap.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> + +/** + * vivaldi_function_row_physmap_show - Print vivaldi function row physmap attribute + * @data: The vivaldi function row map + * @buf: Buffer to print the function row phsymap to + */ +ssize_t vivaldi_function_row_physmap_show(const struct vivaldi_data *data, + char *buf) +{ + ssize_t size = 0; + int i; + const u32 *physmap = data->function_row_physmap; + + if (!data->num_function_row_keys) + return 0; + + for (i = 0; i < data->num_function_row_keys; i++) + size += scnprintf(buf + size, PAGE_SIZE - size, + "%s%02X", size ? " " : "", physmap[i]); + if (size) + size += scnprintf(buf + size, PAGE_SIZE - size, "\n"); + + return size; +} +EXPORT_SYMBOL_GPL(vivaldi_function_row_physmap_show); + +MODULE_LICENSE("GPL"); |