diff options
Diffstat (limited to 'drivers/leds/Kconfig')
| -rw-r--r-- | drivers/leds/Kconfig | 34 |
1 files changed, 27 insertions, 7 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9bec8699b8a3..23f0d5e99f35 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -14,6 +14,13 @@ config LEDS_CLASS This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. +config LEDS_GPIO_REGISTER + bool + help + This option provides the function gpio_led_register_device. + As this function is used by arch code it must not be compiled as a + module. + if NEW_LEDS comment "LED drivers" @@ -115,13 +122,6 @@ config LEDS_ALIX2 This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. You have to set leds-alix2.force=1 for boards with Award BIOS. -config LEDS_H1940 - tristate "LED Support for iPAQ H1940 device" - depends on LEDS_CLASS - depends on ARCH_H1940 - help - This option enables support for the LEDs on the h1940. - config LEDS_COBALT_QUBE tristate "LED Support for the Cobalt Qube series front LED" depends on LEDS_CLASS @@ -162,6 +162,16 @@ config LEDS_PCA9532 LED controller. It is generally only useful as a platform driver +config LEDS_PCA9532_GPIO + bool "Enable GPIO support for PCA9532" + depends on LEDS_PCA9532 + depends on GPIOLIB + help + Allow unused pins on PCA9532 to be used as gpio. + + To use a pin as gpio pca9532_type in pca9532_platform data needs to + set to PCA9532_TYPE_GPIO. + config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS @@ -379,6 +389,16 @@ config LEDS_NETXBIG and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. +config LEDS_ASIC3 + bool "LED support for the HTC ASIC3" + depends on MFD_ASIC3 + default y + help + This option enables support for the LEDs on the HTC ASIC3. The HTC + ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver + cannot be used. This driver supports hardware blinking with an on+off + period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. + config LEDS_TRIGGERS bool "LED Trigger support" depends on LEDS_CLASS |