diff options
Diffstat (limited to 'drivers/media/usb/au0828/au0828-cards.c')
| -rw-r--r-- | drivers/media/usb/au0828/au0828-cards.c | 36 |
1 files changed, 16 insertions, 20 deletions
diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 2c6b7da137ed..9eb77ac2153b 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -46,6 +46,8 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .has_ir_i2c = 1, + .has_analog = 1, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { @@ -72,12 +74,7 @@ struct au0828_board au0828_boards[] = { .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, .has_ir_i2c = 1, - /* The au0828 hardware i2c implementation does not properly - support the xc5000's i2c clock stretching. So we need to - lower the clock frequency enough where the 15us clock - stretch fits inside of a normal clock cycle, or else the - au0828 fails to set the STOP bit. A 30 KHz clock puts the - clock pulse width at 18us */ + .has_analog = 1, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { @@ -101,20 +98,20 @@ struct au0828_board au0828_boards[] = { }, [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = { .name = "Hauppauge HVR950Q rev xxF8", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_NXP_TDA18271, + .tuner_addr = 0x60, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, }; @@ -142,8 +139,7 @@ int au0828_tuner_callback(void *priv, int component, int command, int arg) mdelay(10); return 0; } else { - printk(KERN_ERR - "%s(): Unknown command.\n", __func__); + pr_err("%s(): Unknown command.\n", __func__); return -EINVAL; } break; @@ -177,12 +173,12 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; default: - printk(KERN_WARNING "%s: warning: " - "unknown hauppauge model #%d\n", __func__, tv.model); + pr_warn("%s: warning: unknown hauppauge model #%d\n", + __func__, tv.model); break; } - printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", + pr_info("%s: hauppauge eeprom: model=%d\n", __func__, tv.model); } @@ -228,16 +224,16 @@ void au0828_card_analog_fe_setup(struct au0828_dev *dev) sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "au8522", 0x8e >> 1, NULL); if (sd == NULL) - printk(KERN_ERR "analog subdev registration failed\n"); + pr_err("analog subdev registration failed\n"); } /* Setup tuners */ - if (dev->board.tuner_type != TUNER_ABSENT) { + if (dev->board.tuner_type != TUNER_ABSENT && dev->board.has_analog) { /* Load the tuner module, which does the attach */ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", dev->board.tuner_addr, NULL); if (sd == NULL) - printk(KERN_ERR "tuner subdev registration fail\n"); + pr_err("tuner subdev registration fail\n"); tun_setup.mode_mask = mode_mask; tun_setup.type = dev->board.tuner_type; |