1 files changed, 37 insertions, 46 deletions

diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index 3f0146fcf752..8c780c2d937b 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -25,6 +25,7 @@
 #include <linux/via-core.h>
 #include <linux/via-gpio.h>
 #include <linux/via_i2c.h>
+#include <asm/olpc.h>
 
 #include "via-camera.h"
 
@@ -38,14 +39,12 @@ MODULE_PARM_DESC(flip_image,
 		"If set, the sensor will be instructed to flip the image "
 		"vertically.");
 
-#ifdef CONFIG_OLPC_XO_1_5
 static int override_serial;
 module_param(override_serial, bool, 0444);
 MODULE_PARM_DESC(override_serial,
 		"The camera driver will normally refuse to load if "
 		"the XO 1.5 serial port is enabled.  Set this option "
-		"to force the issue.");
-#endif
+		"to force-enable the camera.");
 
 /*
  * Basic window sizes.
@@ -1317,6 +1316,37 @@ static struct video_device viacam_v4l_template = {
 	.release	= video_device_release_empty, /* Check this */
 };
 
+/*
+ * The OLPC folks put the serial port on the same pin as
+ * the camera.	They also get grumpy if we break the
+ * serial port and keep them from using it.  So we have
+ * to check the serial enable bit and not step on it.
+ */
+#define VIACAM_SERIAL_DEVFN 0x88
+#define VIACAM_SERIAL_CREG 0x46
+#define VIACAM_SERIAL_BIT 0x40
+
+static __devinit bool viacam_serial_is_enabled(void)
+{
+	struct pci_bus *pbus = pci_find_bus(0, 0);
+	u8 cbyte;
+
+	pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN,
+			VIACAM_SERIAL_CREG, &cbyte);
+	if ((cbyte & VIACAM_SERIAL_BIT) == 0)
+		return false; /* Not enabled */
+	if (override_serial == 0) {
+		printk(KERN_NOTICE "Via camera: serial port is enabled, " \
+				"refusing to load.\n");
+		printk(KERN_NOTICE "Specify override_serial=1 to force " \
+				"module loading.\n");
+		return true;
+	}
+	printk(KERN_NOTICE "Via camera: overriding serial port\n");
+	pci_bus_write_config_byte(pbus, VIACAM_SERIAL_DEVFN,
+			VIACAM_SERIAL_CREG, cbyte & ~VIACAM_SERIAL_BIT);
+	return false;
+}
 
 static __devinit int viacam_probe(struct platform_device *pdev)
 {
@@ -1348,6 +1378,10 @@ static __devinit int viacam_probe(struct platform_device *pdev)
 		printk(KERN_ERR "viacam: No I/O memory, so no pictures\n");
 		return -ENOMEM;
 	}
+
+	if (machine_is_olpc() && viacam_serial_is_enabled())
+		return -EBUSY;
+
 	/*
 	 * Basic structure initialization.
 	 */
@@ -1459,7 +1493,6 @@ static __devexit int viacam_remove(struct platform_device *pdev)
 	return 0;
 }
 
-
 static struct platform_driver viacam_driver = {
 	.driver = {
 		.name = "viafb-camera",
@@ -1468,50 +1501,8 @@ static struct platform_driver viacam_driver = {
 	.remove = viacam_remove,
 };
 
-
-#ifdef CONFIG_OLPC_XO_1_5
-/*
- * The OLPC folks put the serial port on the same pin as
- * the camera.	They also get grumpy if we break the
- * serial port and keep them from using it.  So we have
- * to check the serial enable bit and not step on it.
- */
-#define VIACAM_SERIAL_DEVFN 0x88
-#define VIACAM_SERIAL_CREG 0x46
-#define VIACAM_SERIAL_BIT 0x40
-
-static __devinit int viacam_check_serial_port(void)
-{
-	struct pci_bus *pbus = pci_find_bus(0, 0);
-	u8 cbyte;
-
-	pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN,
-			VIACAM_SERIAL_CREG, &cbyte);
-	if ((cbyte & VIACAM_SERIAL_BIT) == 0)
-		return 0; /* Not enabled */
-	if (override_serial == 0) {
-		printk(KERN_NOTICE "Via camera: serial port is enabled, " \
-				"refusing to load.\n");
-		printk(KERN_NOTICE "Specify override_serial=1 to force " \
-				"module loading.\n");
-		return -EBUSY;
-	}
-	printk(KERN_NOTICE "Via camera: overriding serial port\n");
-	pci_bus_write_config_byte(pbus, VIACAM_SERIAL_DEVFN,
-			VIACAM_SERIAL_CREG, cbyte & ~VIACAM_SERIAL_BIT);
-	return 0;
-}
-#endif
-
-
-
-
 static int viacam_init(void)
 {
-#ifdef CONFIG_OLPC_XO_1_5
-	if (viacam_check_serial_port())
-		return -EBUSY;
-#endif
 	return platform_driver_register(&viacam_driver);
 }
 module_init(viacam_init);