diff options
Diffstat (limited to 'drivers/misc/ti-st/st_kim.c')
| -rw-r--r-- | drivers/misc/ti-st/st_kim.c | 71 |
1 files changed, 44 insertions, 27 deletions
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index a36ed1ff5967..f2f6cab97c08 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -30,7 +30,7 @@ static struct platform_device *st_kim_devices[MAX_ST_DEVICES]; /**********************************************************************/ /* internal functions */ -/** +/* * st_get_plat_device - * function which returns the reference to the platform device * requested by id. As of now only 1 such device exists (id=0) @@ -43,7 +43,7 @@ static struct platform_device *st_get_plat_device(int id) return st_kim_devices[id]; } -/** +/* * validate_firmware_response - * function to return whether the firmware response was proper * in case of error don't complete so that waiting for proper @@ -55,7 +55,8 @@ static void validate_firmware_response(struct kim_data_s *kim_gdata) if (!skb) return; - /* these magic numbers are the position in the response buffer which + /* + * these magic numbers are the position in the response buffer which * allows us to distinguish whether the response is for the read * version info. command */ @@ -79,7 +80,8 @@ static void validate_firmware_response(struct kim_data_s *kim_gdata) kfree_skb(skb); } -/* check for data len received inside kim_int_recv +/* + * check for data len received inside kim_int_recv * most often hit the last case to update state to waiting for data */ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len) @@ -91,14 +93,16 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len) if (!len) { validate_firmware_response(kim_gdata); } else if (len > room) { - /* Received packet's payload length is larger. + /* + * Received packet's payload length is larger. * We can't accommodate it in created skb. */ pr_err("Data length is too large len %d room %d", len, room); kfree_skb(kim_gdata->rx_skb); } else { - /* Packet header has non-zero payload length and + /* + * Packet header has non-zero payload length and * we have enough space in created skb. Lets read * payload data */ kim_gdata->rx_state = ST_W4_DATA; @@ -106,8 +110,10 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len) return len; } - /* Change ST LL state to continue to process next - * packet */ + /* + * Change ST LL state to continue to process next + * packet + */ kim_gdata->rx_state = ST_W4_PACKET_TYPE; kim_gdata->rx_skb = NULL; kim_gdata->rx_count = 0; @@ -115,7 +121,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len) return 0; } -/** +/* * kim_int_recv - receive function called during firmware download * firmware download responses on different UART drivers * have been observed to come in bursts of different @@ -216,7 +222,8 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name) return timeout ? -ERESTARTSYS : -ETIMEDOUT; } reinit_completion(&kim_gdata->kim_rcvd); - /* the positions 12 & 13 in the response buffer provide with the + /* + * the positions 12 & 13 in the response buffer provide with the * chip, major & minor numbers */ @@ -263,7 +270,7 @@ static void skip_change_remote_baud(unsigned char **ptr, long *len) } } -/** +/* * download_firmware - * internal function which parses through the .bts firmware * script file intreprets SEND, DELAY actions only as of now @@ -295,7 +302,8 @@ static long download_firmware(struct kim_data_s *kim_gdata) } ptr = (void *)kim_gdata->fw_entry->data; len = kim_gdata->fw_entry->size; - /* bts_header to remove out magic number and + /* + * bts_header to remove out magic number and * version */ ptr += sizeof(struct bts_header); @@ -313,8 +321,10 @@ static long download_firmware(struct kim_data_s *kim_gdata) if (unlikely (((struct hci_command *)action_ptr)->opcode == 0xFF36)) { - /* ignore remote change - * baud rate HCI VS command */ + /* + * ignore remote change + * baud rate HCI VS command + */ pr_warn("change remote baud" " rate command in firmware"); skip_change_remote_baud(&ptr, &len); @@ -346,7 +356,8 @@ static long download_firmware(struct kim_data_s *kim_gdata) release_firmware(kim_gdata->fw_entry); return -ETIMEDOUT; } - /* reinit completion before sending for the + /* + * reinit completion before sending for the * relevant wait */ reinit_completion(&kim_gdata->kim_rcvd); @@ -418,14 +429,16 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count) struct st_data_s *st_gdata = (struct st_data_s *)disc_data; struct kim_data_s *kim_gdata = st_gdata->kim_data; - /* proceed to gather all data and distinguish read fw version response + /* + * proceed to gather all data and distinguish read fw version response * from other fw responses when data gathering is complete */ kim_int_recv(kim_gdata, data, count); return; } -/* to signal completion of line discipline installation +/* + * to signal completion of line discipline installation * called from ST Core, upon tty_open */ void st_kim_complete(void *kim_data) @@ -434,7 +447,7 @@ void st_kim_complete(void *kim_data) complete(&kim_gdata->ldisc_installed); } -/** +/* * st_kim_start - called from ST Core upon 1st registration * This involves toggling the chip enable gpio, reading * the firmware version from chip, forming the fw file name @@ -472,8 +485,10 @@ long st_kim_start(void *kim_data) err = wait_for_completion_interruptible_timeout( &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME)); if (!err) { - /* ldisc installation timeout, - * flush uart, power cycle BT_EN */ + /* + * ldisc installation timeout, + * flush uart, power cycle BT_EN + */ pr_err("ldisc installation timeout"); err = st_kim_stop(kim_gdata); continue; @@ -482,8 +497,10 @@ long st_kim_start(void *kim_data) pr_info("line discipline installed"); err = download_firmware(kim_gdata); if (err != 0) { - /* ldisc installed but fw download failed, - * flush uart & power cycle BT_EN */ + /* + * ldisc installed but fw download failed, + * flush uart & power cycle BT_EN + */ pr_err("download firmware failed"); err = st_kim_stop(kim_gdata); continue; @@ -495,7 +512,7 @@ long st_kim_start(void *kim_data) return err; } -/** +/* * st_kim_stop - stop communication with chip. * This can be called from ST Core/KIM, on the- * (a) last un-register when chip need not be powered there-after, @@ -650,7 +667,7 @@ static const struct attribute_group uim_attr_grp = { .attrs = uim_attrs, }; -/** +/* * st_kim_ref - reference the core's data * This references the per-ST platform device in the arch/xx/ * board-xx.c file. @@ -729,8 +746,7 @@ static int kim_probe(struct platform_device *pdev) pr_err(" unable to configure gpio %d", kim_gdata->nshutdown); goto err_sysfs_group; } - /* get reference of pdev for request_firmware - */ + /* get reference of pdev for request_firmware */ kim_gdata->kim_pdev = pdev; init_completion(&kim_gdata->kim_rcvd); init_completion(&kim_gdata->ldisc_installed); @@ -772,7 +788,8 @@ static int kim_remove(struct platform_device *pdev) kim_gdata = platform_get_drvdata(pdev); - /* Free the Bluetooth/FM/GPIO + /* + * Free the Bluetooth/FM/GPIO * nShutdown gpio from the system */ gpio_free(pdata->nshutdown_gpio); |