aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/host/mmci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/mmci.c')
-rw-r--r--drivers/mmc/host/mmci.c127
1 files changed, 111 insertions, 16 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e8a1bb1ae694..70b0df8b9c78 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -82,6 +82,10 @@ static unsigned int fmax = 515633;
* @qcom_fifo: enables qcom specific fifo pio read logic.
* @qcom_dml: enables qcom specific dma glue for dma transfers.
* @reversed_irq_handling: handle data irq before cmd irq.
+ * @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
+ * register.
+ * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
*/
struct variant_data {
unsigned int clkreg;
@@ -111,6 +115,9 @@ struct variant_data {
bool qcom_fifo;
bool qcom_dml;
bool reversed_irq_handling;
+ bool mmcimask1;
+ u32 start_err;
+ u32 opendrain;
};
static struct variant_data variant_arm = {
@@ -120,6 +127,9 @@ static struct variant_data variant_arm = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.reversed_irq_handling = true,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_ROD,
};
static struct variant_data variant_arm_extended_fifo = {
@@ -128,6 +138,9 @@ static struct variant_data variant_arm_extended_fifo = {
.datalength_bits = 16,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_ROD,
};
static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -137,6 +150,9 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.datalength_bits = 16,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_ROD,
};
static struct variant_data variant_u300 = {
@@ -152,6 +168,9 @@ static struct variant_data variant_u300 = {
.signal_direction = true,
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_OD,
};
static struct variant_data variant_nomadik = {
@@ -168,6 +187,9 @@ static struct variant_data variant_nomadik = {
.signal_direction = true,
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_OD,
};
static struct variant_data variant_ux500 = {
@@ -190,6 +212,9 @@ static struct variant_data variant_ux500 = {
.busy_detect_flag = MCI_ST_CARDBUSY,
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_OD,
};
static struct variant_data variant_ux500v2 = {
@@ -214,6 +239,26 @@ static struct variant_data variant_ux500v2 = {
.busy_detect_flag = MCI_ST_CARDBUSY,
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_OD,
+};
+
+static struct variant_data variant_stm32 = {
+ .fifosize = 32 * 4,
+ .fifohalfsize = 8 * 4,
+ .clkreg = MCI_CLK_ENABLE,
+ .clkreg_enable = MCI_ST_UX500_HWFCEN,
+ .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
+ .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
+ .datalength_bits = 24,
+ .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
+ .st_sdio = true,
+ .st_clkdiv = true,
+ .pwrreg_powerup = MCI_PWR_ON,
+ .f_max = 48000000,
+ .pwrreg_clkgate = true,
+ .pwrreg_nopower = true,
};
static struct variant_data variant_qcom = {
@@ -232,6 +277,9 @@ static struct variant_data variant_qcom = {
.explicit_mclk_control = true,
.qcom_fifo = true,
.qcom_dml = true,
+ .mmcimask1 = true,
+ .start_err = MCI_STARTBITERR,
+ .opendrain = MCI_ROD,
};
/* Busy detection for the ST Micro variant */
@@ -396,6 +444,7 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
{
void __iomem *base = host->base;
+ struct variant_data *variant = host->variant;
if (host->singleirq) {
unsigned int mask0 = readl(base + MMCIMASK0);
@@ -406,7 +455,10 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
writel(mask0, base + MMCIMASK0);
}
- writel(mask, base + MMCIMASK1);
+ if (variant->mmcimask1)
+ writel(mask, base + MMCIMASK1);
+
+ host->mask1_reg = mask;
}
static void mmci_stop_data(struct mmci_host *host)
@@ -921,8 +973,9 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
return;
/* First check for errors */
- if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
- MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+ host->variant->start_err |
+ MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
u32 remain, success;
/* Terminate the DMA transfer */
@@ -1286,7 +1339,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
status = readl(host->base + MMCISTATUS);
if (host->singleirq) {
- if (status & readl(host->base + MMCIMASK1))
+ if (status & host->mask1_reg)
mmci_pio_irq(irq, dev_id);
status &= ~MCI_IRQ1MASK;
@@ -1429,16 +1482,18 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
~MCI_ST_DATA2DIREN);
}
- if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
- if (host->hw_designer != AMBA_VENDOR_ST)
- pwr |= MCI_ROD;
- else {
- /*
- * The ST Micro variant use the ROD bit for something
- * else and only has OD (Open Drain).
- */
- pwr |= MCI_OD;
- }
+ if (variant->opendrain) {
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ pwr |= variant->opendrain;
+ } else {
+ /*
+ * If the variant cannot configure the pads by its own, then we
+ * expect the pinctrl to be able to do that for us
+ */
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ pinctrl_select_state(host->pinctrl, host->pins_opendrain);
+ else
+ pinctrl_select_state(host->pinctrl, host->pins_default);
}
/*
@@ -1583,6 +1638,35 @@ static int mmci_probe(struct amba_device *dev,
host = mmc_priv(mmc);
host->mmc = mmc;
+ /*
+ * Some variant (STM32) doesn't have opendrain bit, nevertheless
+ * pins can be set accordingly using pinctrl
+ */
+ if (!variant->opendrain) {
+ host->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(host->pinctrl)) {
+ dev_err(&dev->dev, "failed to get pinctrl");
+ ret = PTR_ERR(host->pinctrl);
+ goto host_free;
+ }
+
+ host->pins_default = pinctrl_lookup_state(host->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(host->pins_default)) {
+ dev_err(mmc_dev(mmc), "Can't select default pins\n");
+ ret = PTR_ERR(host->pins_default);
+ goto host_free;
+ }
+
+ host->pins_opendrain = pinctrl_lookup_state(host->pinctrl,
+ MMCI_PINCTRL_STATE_OPENDRAIN);
+ if (IS_ERR(host->pins_opendrain)) {
+ dev_err(mmc_dev(mmc), "Can't select opendrain pins\n");
+ ret = PTR_ERR(host->pins_opendrain);
+ goto host_free;
+ }
+ }
+
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
@@ -1729,7 +1813,10 @@ static int mmci_probe(struct amba_device *dev,
spin_lock_init(&host->lock);
writel(0, host->base + MMCIMASK0);
- writel(0, host->base + MMCIMASK1);
+
+ if (variant->mmcimask1)
+ writel(0, host->base + MMCIMASK1);
+
writel(0xfff, host->base + MMCICLEAR);
/*
@@ -1809,6 +1896,7 @@ static int mmci_remove(struct amba_device *dev)
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
+ struct variant_data *variant = host->variant;
/*
* Undo pm_runtime_put() in probe. We use the _sync
@@ -1819,7 +1907,9 @@ static int mmci_remove(struct amba_device *dev)
mmc_remove_host(mmc);
writel(0, host->base + MMCIMASK0);
- writel(0, host->base + MMCIMASK1);
+
+ if (variant->mmcimask1)
+ writel(0, host->base + MMCIMASK1);
writel(0, host->base + MMCICOMMAND);
writel(0, host->base + MMCIDATACTRL);
@@ -1951,6 +2041,11 @@ static const struct amba_id mmci_ids[] = {
.mask = 0xf0ffffff,
.data = &variant_ux500v2,
},
+ {
+ .id = 0x00880180,
+ .mask = 0x00ffffff,
+ .data = &variant_stm32,
+ },
/* Qualcomm variants */
{
.id = 0x00051180,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 21:38:16 +0000