diff options
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand/gpmi-lib.c')
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 63 |
1 files changed, 22 insertions, 41 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 10a6f07eec7f..45b9a3db3606 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -1128,10 +1128,8 @@ int gpmi_send_command(struct gpmi_nand_data *this) desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] send out the COMMAND + ADDRESS string stored in @buffer */ sgl = &this->cmd_sgl; @@ -1141,11 +1139,8 @@ int gpmi_send_command(struct gpmi_nand_data *this) desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [3] submit the DMA */ set_dma_type(this, DMA_FOR_COMMAND); @@ -1174,20 +1169,17 @@ int gpmi_send_data(struct gpmi_nand_data *this) pio[1] = 0; desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] send DMA request */ prepare_data_dma(this, DMA_TO_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; + /* [3] submit the DMA */ set_dma_type(this, DMA_FOR_WRITE_DATA); return start_dma_without_bch_irq(this, desc); @@ -1211,20 +1203,16 @@ int gpmi_read_data(struct gpmi_nand_data *this) desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] : send DMA request */ prepare_data_dma(this, DMA_FROM_DEVICE); desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [3] : submit the DMA */ set_dma_type(this, DMA_FOR_READ_DATA); @@ -1269,10 +1257,9 @@ int gpmi_send_page(struct gpmi_nand_data *this, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; + set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE); return start_dma_with_bch_irq(this, desc); } @@ -1304,10 +1291,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, 2, DMA_TRANS_NONE, 0); - if (!desc) { - pr_err("step 1 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [2] Enable the BCH block and read. */ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ; @@ -1334,10 +1319,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 2 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [3] Disable the BCH block */ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY; @@ -1355,10 +1338,8 @@ int gpmi_read_page(struct gpmi_nand_data *this, (struct scatterlist *)pio, 3, DMA_TRANS_NONE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("step 3 error\n"); - return -1; - } + if (!desc) + return -EINVAL; /* [4] submit the DMA */ set_dma_type(this, DMA_FOR_READ_ECC_PAGE); |