diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 88 |
1 files changed, 1 insertions, 87 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 4a1b5ee976b3..f2f367d4e74d 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -521,22 +521,6 @@ static u8 bnx2x_emac_enable(struct link_params *params, /* enable emac and not bmac */ REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1); - /* for paladium */ - if (CHIP_REV_IS_EMUL(bp)) { - /* Use lane 1 (of lanes 0-3) */ - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1); - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); - } - /* for fpga */ - else - - if (CHIP_REV_IS_FPGA(bp)) { - /* Use lane 1 (of lanes 0-3) */ - DP(NETIF_MSG_LINK, "bnx2x_emac_enable: Setting FPGA\n"); - - REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1); - REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0); - } else /* ASIC */ if (vars->phy_flags & PHY_XGXS_FLAG) { u32 ser_lane = ((params->lane_config & @@ -654,15 +638,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1); - if (CHIP_REV_IS_EMUL(bp)) { - /* take the BigMac out of reset */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - - /* enable access for bmac registers */ - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1); - } else - REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0); + REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0); vars->mac_type = MAC_TYPE_EMAC; return 0; @@ -1086,14 +1062,6 @@ static u8 bnx2x_bmac1_enable(struct link_params *params, wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, wb_data, 2); - /* fix for emulation */ - if (CHIP_REV_IS_EMUL(bp)) { - wb_data[0] = 0xf000; - wb_data[1] = 0; - REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD, - wb_data, 2); - } - return 0; } @@ -7678,57 +7646,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) set_phy_vars(params); DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys); - if (CHIP_REV_IS_FPGA(bp)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); - /* enable on E1.5 FPGA */ - if (CHIP_IS_E1H(bp)) { - vars->flow_ctrl |= - (BNX2X_FLOW_CTRL_TX | - BNX2X_FLOW_CTRL_RX); - vars->link_status |= - (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | - LINK_STATUS_RX_FLOW_CONTROL_ENABLED); - } - - bnx2x_emac_enable(params, vars, 0); - if (!(CHIP_IS_E2(bp))) - bnx2x_pbf_update(params, vars->flow_ctrl, - vars->line_speed); - /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - - return 0; - - } else - if (CHIP_REV_IS_EMUL(bp)) { - - vars->link_up = 1; - vars->line_speed = SPEED_10000; - vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; - vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); - - bnx2x_bmac_enable(params, vars, 0); - - bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); - /* Disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); - - /* update shared memory */ - bnx2x_update_mng(params, vars->link_status); - - return 0; - - } else if (params->loopback_mode == LOOPBACK_BMAC) { vars->link_up = 1; @@ -8263,9 +8180,6 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], u32 ext_phy_type, ext_phy_config; DP(NETIF_MSG_LINK, "Begin common phy init\n"); - if (CHIP_REV_IS_EMUL(bp)) - return 0; - /* Check if common init was already done */ phy_ver = REG_RD(bp, shmem_base_path[0] + offsetof(struct shmem_region, |