diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_link.h | 44 |
1 files changed, 23 insertions, 21 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index ac348daae2f2..418bef472e08 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -281,40 +281,41 @@ struct link_vars { /***********************************************************/ /* Functions */ /***********************************************************/ -u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output); +int bnx2x_phy_init(struct link_params *params, struct link_vars *vars); /* Reset the link. Should be called when driver or interface goes down Before calling phy firmware upgrade, the reset_ext_phy should be set to 0 */ -u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, - u8 reset_ext_phy); +int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy); /* bnx2x_link_update should be called upon link interrupt */ -u8 bnx2x_link_update(struct link_params *input, struct link_vars *output); +int bnx2x_link_update(struct link_params *params, struct link_vars *vars); /* use the following phy functions to read/write from external_phy In order to use it to read/write internal phy registers, use DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as the register */ -u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 *ret_val); +int bnx2x_phy_read(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 *ret_val); + +int bnx2x_phy_write(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 val); -u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr, - u8 devad, u16 reg, u16 val); /* Reads the link_status from the shmem, and update the link vars accordingly */ void bnx2x_link_status_update(struct link_params *input, struct link_vars *output); /* returns string representing the fw_version of the external phy */ -u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, - u8 *version, u16 len); +int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, + u8 *version, u16 len); /* Set/Unset the led Basically, the CLC takes care of the led for the link, but in case one needs to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to blink the led, and LED_MODE_OFF to set the led off.*/ -u8 bnx2x_set_led(struct link_params *params, struct link_vars *vars, - u8 mode, u32 speed); +int bnx2x_set_led(struct link_params *params, + struct link_vars *vars, u8 mode, u32 speed); #define LED_MODE_OFF 0 #define LED_MODE_ON 1 #define LED_MODE_OPER 2 @@ -326,12 +327,12 @@ void bnx2x_handle_module_detect_int(struct link_params *params); /* Get the actual link status. In case it returns 0, link is up, otherwise link is down*/ -u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars, - u8 is_serdes); +int bnx2x_test_link(struct link_params *params, struct link_vars *vars, + u8 is_serdes); /* One-time initialization for external phy after power up */ -u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], - u32 shmem2_base_path[], u32 chip_id); +int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u32 chip_id); /* Reset the external PHY using GPIO */ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); @@ -340,9 +341,9 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy); /* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ -u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf); +int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf); void bnx2x_hw_reset_phy(struct link_params *params); @@ -354,7 +355,8 @@ u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, u32 bnx2x_phy_selection(struct link_params *params); /* Probe the phys on board, and populate them in "params" */ -u8 bnx2x_phy_probe(struct link_params *params); +int bnx2x_phy_probe(struct link_params *params); + /* Checks if fan failure detection is required on one of the phys on board */ u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base, u8 port); @@ -392,7 +394,7 @@ void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, const u32 cos1_bw); /* Used to configure the ETS to strict */ -u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); +int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); /* Read pfc statistic*/ void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, |