diff options
Diffstat (limited to 'drivers/net/can')
-rw-r--r-- | drivers/net/can/janz-ican3.c | 203 |
1 files changed, 157 insertions, 46 deletions
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 4a5a8fb53a2f..47f8f6b4fef9 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -220,6 +220,9 @@ struct ican3_dev { /* old and new style host interface */ unsigned int iftype; + /* queue for echo packets */ + struct sk_buff_head echoq; + /* * Any function which changes the current DPM page must hold this * lock while it is performing data accesses. This ensures that the @@ -925,7 +928,7 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg) struct net_device *dev = mod->ndev; struct net_device_stats *stats = &dev->stats; enum can_state state = mod->can.state; - u8 status, isrc, rxerr, txerr; + u8 isrc, ecc, status, rxerr, txerr; struct can_frame *cf; struct sk_buff *skb; @@ -941,15 +944,43 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg) return -EINVAL; } - skb = alloc_can_err_skb(dev, &cf); - if (skb == NULL) - return -ENOMEM; - isrc = msg->data[0]; + ecc = msg->data[2]; status = msg->data[3]; rxerr = msg->data[4]; txerr = msg->data[5]; + /* + * This hardware lacks any support other than bus error messages to + * determine if packet transmission has failed. + * + * When TX errors happen, one echo skb needs to be dropped from the + * front of the queue. + * + * A small bit of code is duplicated here and below, to avoid error + * skb allocation when it will just be freed immediately. + */ + if (isrc == CEVTIND_BEI) { + int ret; + dev_dbg(mod->dev, "bus error interrupt\n"); + + /* TX error */ + if (!(ecc & ECC_DIR)) { + kfree_skb(skb_dequeue(&mod->echoq)); + stats->tx_errors++; + } else { + stats->rx_errors++; + } + + /* bus error reporting is off, return immediately */ + if (!(mod->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) + return 0; + } + + skb = alloc_can_err_skb(dev, &cf); + if (skb == NULL) + return -ENOMEM; + /* data overrun interrupt */ if (isrc == CEVTIND_DOI || isrc == CEVTIND_LOST) { dev_dbg(mod->dev, "data overrun interrupt\n"); @@ -978,9 +1009,6 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg) /* bus error interrupt */ if (isrc == CEVTIND_BEI) { - u8 ecc = msg->data[2]; - - dev_dbg(mod->dev, "bus error interrupt\n"); mod->can.can_stats.bus_error++; cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; @@ -1000,12 +1028,8 @@ static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg) break; } - if (!(ecc & ECC_DIR)) { + if (!(ecc & ECC_DIR)) cf->data[2] |= CAN_ERR_PROT_TX; - stats->tx_errors++; - } else { - stats->rx_errors++; - } cf->data[6] = txerr; cf->data[7] = rxerr; @@ -1090,6 +1114,88 @@ static void ican3_handle_message(struct ican3_dev *mod, struct ican3_msg *msg) } /* + * The ican3 needs to store all echo skbs, and therefore cannot + * use the generic infrastructure for this. + */ +static void ican3_put_echo_skb(struct ican3_dev *mod, struct sk_buff *skb) +{ + struct sock *srcsk = skb->sk; + + if (atomic_read(&skb->users) != 1) { + struct sk_buff *old_skb = skb; + + skb = skb_clone(old_skb, GFP_ATOMIC); + kfree_skb(old_skb); + if (!skb) + return; + } else { + skb_orphan(skb); + } + + skb->sk = srcsk; + + /* save this skb for tx interrupt echo handling */ + skb_queue_tail(&mod->echoq, skb); +} + +static unsigned int ican3_get_echo_skb(struct ican3_dev *mod) +{ + struct sk_buff *skb = skb_dequeue(&mod->echoq); + struct can_frame *cf; + u8 dlc; + + /* this should never trigger unless there is a driver bug */ + if (!skb) { + netdev_err(mod->ndev, "BUG: echo skb not occupied\n"); + return 0; + } + + cf = (struct can_frame *)skb->data; + dlc = cf->can_dlc; + + /* check flag whether this packet has to be looped back */ + if (skb->pkt_type != PACKET_LOOPBACK) { + kfree_skb(skb); + return dlc; + } + + skb->protocol = htons(ETH_P_CAN); + skb->pkt_type = PACKET_BROADCAST; + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->dev = mod->ndev; + netif_receive_skb(skb); + return dlc; +} + +/* + * Compare an skb with an existing echo skb + * + * This function will be used on devices which have a hardware loopback. + * On these devices, this function can be used to compare a received skb + * with the saved echo skbs so that the hardware echo skb can be dropped. + * + * Returns true if the skb's are identical, false otherwise. + */ +static bool ican3_echo_skb_matches(struct ican3_dev *mod, struct sk_buff *skb) +{ + struct can_frame *cf = (struct can_frame *)skb->data; + struct sk_buff *echo_skb = skb_peek(&mod->echoq); + struct can_frame *echo_cf; + + if (!echo_skb) + return false; + + echo_cf = (struct can_frame *)echo_skb->data; + if (cf->can_id != echo_cf->can_id) + return false; + + if (cf->can_dlc != echo_cf->can_dlc) + return false; + + return memcmp(cf->data, echo_cf->data, cf->can_dlc) == 0; +} + +/* * Check that there is room in the TX ring to transmit another skb * * LOCKING: must hold mod->lock @@ -1099,6 +1205,10 @@ static bool ican3_txok(struct ican3_dev *mod) struct ican3_fast_desc __iomem *desc; u8 control; + /* check that we have echo queue space */ + if (skb_queue_len(&mod->echoq) >= ICAN3_TX_BUFFERS) + return false; + /* copy the control bits of the descriptor */ ican3_set_page(mod, mod->fasttx_start + (mod->fasttx_num / 16)); desc = mod->dpm + ((mod->fasttx_num % 16) * sizeof(*desc)); @@ -1149,10 +1259,27 @@ static int ican3_recv_skb(struct ican3_dev *mod) /* convert the ICAN3 frame into Linux CAN format */ ican3_to_can_frame(mod, &desc, cf); - /* receive the skb, update statistics */ - netif_receive_skb(skb); + /* + * If this is an ECHO frame received from the hardware loopback + * feature, use the skb saved in the ECHO stack instead. This allows + * the Linux CAN core to support CAN_RAW_RECV_OWN_MSGS correctly. + * + * Since this is a confirmation of a successfully transmitted packet + * sent from this host, update the transmit statistics. + * + * Also, the netdevice queue needs to be allowed to send packets again. + */ + if (ican3_echo_skb_matches(mod, skb)) { + stats->tx_packets++; + stats->tx_bytes += ican3_get_echo_skb(mod); + kfree_skb(skb); + goto err_noalloc; + } + + /* update statistics, receive the skb */ stats->rx_packets++; stats->rx_bytes += cf->can_dlc; + netif_receive_skb(skb); err_noalloc: /* toggle the valid bit and return the descriptor to the ring */ @@ -1175,13 +1302,13 @@ err_noalloc: static int ican3_napi(struct napi_struct *napi, int budget) { struct ican3_dev *mod = container_of(napi, struct ican3_dev, napi); - struct ican3_msg msg; unsigned long flags; int received = 0; int ret; /* process all communication messages */ while (true) { + struct ican3_msg msg; ret = ican3_recv_msg(mod, &msg); if (ret) break; @@ -1353,7 +1480,6 @@ static int __devinit ican3_startup_module(struct ican3_dev *mod) static int ican3_open(struct net_device *ndev) { struct ican3_dev *mod = netdev_priv(ndev); - u8 quota; int ret; /* open the CAN layer */ @@ -1363,19 +1489,6 @@ static int ican3_open(struct net_device *ndev) return ret; } - /* set the bus error generation state appropriately */ - if (mod->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) - quota = ICAN3_BUSERR_QUOTA_MAX; - else - quota = 0; - - ret = ican3_set_buserror(mod, quota); - if (ret) { - dev_err(mod->dev, "unable to set bus-error\n"); - close_candev(ndev); - return ret; - } - /* bring the bus online */ ret = ican3_set_bus_state(mod, true); if (ret) { @@ -1407,6 +1520,9 @@ static int ican3_stop(struct net_device *ndev) return ret; } + /* drop all outstanding echo skbs */ + skb_queue_purge(&mod->echoq); + /* close the CAN layer */ close_candev(ndev); return 0; @@ -1415,7 +1531,6 @@ static int ican3_stop(struct net_device *ndev) static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev) { struct ican3_dev *mod = netdev_priv(ndev); - struct net_device_stats *stats = &ndev->stats; struct can_frame *cf = (struct can_frame *)skb->data; struct ican3_fast_desc desc; void __iomem *desc_addr; @@ -1428,8 +1543,7 @@ static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev) /* check that we can actually transmit */ if (!ican3_txok(mod)) { - dev_err(mod->dev, "no free descriptors, stopping queue\n"); - netif_stop_queue(ndev); + dev_err(mod->dev, "BUG: no free descriptors\n"); spin_unlock_irqrestore(&mod->lock, flags); return NETDEV_TX_BUSY; } @@ -1444,6 +1558,14 @@ static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev) can_frame_to_ican3(mod, cf, &desc); /* + * This hardware doesn't have TX-done notifications, so we'll try and + * emulate it the best we can using ECHO skbs. Add the skb to the ECHO + * stack. Upon packet reception, check if the ECHO skb and received + * skb match, and use that to wake the queue. + */ + ican3_put_echo_skb(mod, skb); + + /* * the programming manual says that you must set the IVALID bit, then * interrupt, then set the valid bit. Quite weird, but it seems to be * required for this to work @@ -1461,19 +1583,7 @@ static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev) mod->fasttx_num = (desc.control & DESC_WRAP) ? 0 : (mod->fasttx_num + 1); - /* update statistics */ - stats->tx_packets++; - stats->tx_bytes += cf->can_dlc; - kfree_skb(skb); - - /* - * This hardware doesn't have TX-done notifications, so we'll try and - * emulate it the best we can using ECHO skbs. Get the next TX - * descriptor, and see if we have room to send. If not, stop the queue. - * It will be woken when the ECHO skb for the current packet is recv'd. - */ - - /* copy the control bits of the descriptor */ + /* if there is no free descriptor space, stop the transmit queue */ if (!ican3_txok(mod)) netif_stop_queue(ndev); @@ -1669,6 +1779,7 @@ static int __devinit ican3_probe(struct platform_device *pdev) mod->dev = &pdev->dev; mod->num = pdata->modno; netif_napi_add(ndev, &mod->napi, ican3_napi, ICAN3_RX_BUFFERS); + skb_queue_head_init(&mod->echoq); spin_lock_init(&mod->lock); init_completion(&mod->termination_comp); init_completion(&mod->buserror_comp); |