4 files changed, 22 insertions, 14 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb/common.h b/drivers/net/ethernet/chelsio/cxgb/common.h
index 53b1f9478383..6916c62f2487 100644
--- a/drivers/net/ethernet/chelsio/cxgb/common.h
+++ b/drivers/net/ethernet/chelsio/cxgb/common.h
@@ -85,6 +85,11 @@ struct t1_rx_mode {
 #define SPEED_INVALID 0xffff
 #define DUPLEX_INVALID 0xff
 
+/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */
+#define PM3393_MAX_FRAME_SIZE 9600
+
+#define VSC7326_MAX_MTU 9600
+
 enum {
 	CHBT_BOARD_N110,
 	CHBT_BOARD_N210,
diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index f5f1b0b51ebd..81d1d0bc7553 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -825,8 +825,6 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu)
 
 	if (!mac->ops->set_mtu)
 		return -EOPNOTSUPP;
-	if (new_mtu < 68)
-		return -EINVAL;
 	if ((ret = mac->ops->set_mtu(mac, new_mtu)))
 		return ret;
 	dev->mtu = new_mtu;
@@ -1101,6 +1099,22 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		netif_napi_add(netdev, &adapter->napi, t1_poll, 64);
 
 		netdev->ethtool_ops = &t1_ethtool_ops;
+
+		switch (bi->board) {
+		case CHBT_BOARD_CHT110:
+		case CHBT_BOARD_N110:
+		case CHBT_BOARD_N210:
+		case CHBT_BOARD_CHT210:
+			netdev->max_mtu = PM3393_MAX_FRAME_SIZE -
+					  (ETH_HLEN + ETH_FCS_LEN);
+			break;
+		case CHBT_BOARD_CHN204:
+			netdev->max_mtu = VSC7326_MAX_MTU;
+			break;
+		default:
+			netdev->max_mtu = ETH_DATA_LEN;
+			break;
+		}
 	}
 
 	if (t1_init_sw_modules(adapter, bi) < 0) {
diff --git a/drivers/net/ethernet/chelsio/cxgb/pm3393.c b/drivers/net/ethernet/chelsio/cxgb/pm3393.c
index eb462d7db427..c27908e66f5e 100644
--- a/drivers/net/ethernet/chelsio/cxgb/pm3393.c
+++ b/drivers/net/ethernet/chelsio/cxgb/pm3393.c
@@ -47,9 +47,6 @@
 
 #define OFFSET(REG_ADDR)    ((REG_ADDR) << 2)
 
-/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */
-#define MAX_FRAME_SIZE  9600
-
 #define IPG 12
 #define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \
 	SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \
@@ -331,10 +328,7 @@ static int pm3393_set_mtu(struct cmac *cmac, int mtu)
 {
 	int enabled = cmac->instance->enabled;
 
-	/* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */
-	mtu += 14 + 4;
-	if (mtu > MAX_FRAME_SIZE)
-		return -EINVAL;
+	mtu += ETH_HLEN + ETH_FCS_LEN;
 
 	/* Disable Rx/Tx MAC before configuring it. */
 	if (enabled)
diff --git a/drivers/net/ethernet/chelsio/cxgb/vsc7326.c b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c
index 6f30b6f78553..bdc895bd2a46 100644
--- a/drivers/net/ethernet/chelsio/cxgb/vsc7326.c
+++ b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c
@@ -11,8 +11,6 @@
 /* 30 minutes for full statistics update */
 #define MAJOR_UPDATE_TICKS (1800 / STATS_TICK_SECS)
 
-#define MAX_MTU 9600
-
 /* The egress WM value 0x01a01fff should be used only when the
  * interface is down (MAC port disabled). This is a workaround
  * for disabling the T2/MAC flow-control. When the interface is
@@ -452,9 +450,6 @@ static int mac_set_mtu(struct cmac *mac, int mtu)
 {
 	int port = mac->instance->index;
 
-	if (mtu > MAX_MTU)
-		return -EINVAL;
-
 	/* max_len includes header and FCS */
 	vsc_write(mac->adapter, REG_MAX_LEN(port), mtu + 14 + 4);
 	return 0;