diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 427 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 76 |
2 files changed, 253 insertions, 250 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d66133bf3eb5..786e8b0b2d06 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -15,85 +15,153 @@ if PHYLIB config SWPHY bool -comment "MII PHY device drivers" +comment "MDIO bus device drivers" -config AQUANTIA_PHY - tristate "Drivers for the Aquantia PHYs" - ---help--- - Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 - -config AT803X_PHY - tristate "Drivers for Atheros AT803X PHYs" - ---help--- - Currently supports the AT8030 and AT8035 model +config MDIO_BCM_IPROC + tristate "Broadcom iProc MDIO bus controller" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF_MDIO + help + This module provides a driver for the MDIO busses found in the + Broadcom iProc SoC's. -config AMD_PHY - tristate "Drivers for the AMD PHYs" - ---help--- - Currently supports the am79c874 +config MDIO_BCM_UNIMAC + tristate "Broadcom UniMAC MDIO bus controller" + depends on HAS_IOMEM + help + This module provides a driver for the Broadcom UniMAC MDIO busses. + This hardware can be found in the Broadcom GENET Ethernet MAC + controllers as well as some Broadcom Ethernet switches such as the + Starfighter 2 switches. -config MARVELL_PHY - tristate "Drivers for Marvell PHYs" - ---help--- - Currently has a driver for the 88E1011S - -config DAVICOM_PHY - tristate "Drivers for Davicom PHYs" - ---help--- - Currently supports dm9161e and dm9131 +config MDIO_BITBANG + tristate "Support for bitbanged MDIO buses" + help + This module implements the MDIO bus protocol in software, + for use by low level drivers that export the ability to + drive the relevant pins. -config QSEMI_PHY - tristate "Drivers for Quality Semiconductor PHYs" - ---help--- - Currently supports the qs6612 + If in doubt, say N. -config LXT_PHY - tristate "Drivers for the Intel LXT PHYs" - ---help--- - Currently supports the lxt970, lxt971 +config MDIO_BUS_MUX + tristate + depends on OF_MDIO + help + This module provides a driver framework for MDIO bus + multiplexers which connect one of several child MDIO busses + to a parent bus. Switching between child busses is done by + device specific drivers. -config CICADA_PHY - tristate "Drivers for the Cicada PHYs" - ---help--- - Currently supports the cis8204 +config MDIO_BUS_MUX_BCM_IPROC + tristate "Support for iProc based MDIO bus multiplexers" + depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST) + select MDIO_BUS_MUX + default ARCH_BCM_IPROC + help + This module provides a driver for MDIO bus multiplexers found in + iProc based Broadcom SoCs. This multiplexer connects one of several + child MDIO bus to a parent bus. Buses could be internal as well as + external and selection logic lies inside the same multiplexer. -config VITESSE_PHY - tristate "Drivers for the Vitesse PHYs" - ---help--- - Currently supports the vsc8244 +config MDIO_BUS_MUX_GPIO + tristate "Support for GPIO controlled MDIO bus multiplexers" + depends on OF_GPIO && OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via GPIO lines. The multiplexer connects one of + several child MDIO busses to a parent bus. Child bus + selection is under the control of GPIO lines. -config TERANETICS_PHY - tristate "Drivers for the Teranetics PHYs" - ---help--- - Currently supports the Teranetics TN2020 +config MDIO_BUS_MUX_MMIOREG + tristate "Support for MMIO device-controlled MDIO bus multiplexers" + depends on OF_MDIO && HAS_IOMEM + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via a simple memory-mapped device, like an FPGA. + The multiplexer connects one of several child MDIO busses to a + parent bus. Child bus selection is under the control of one of + the FPGA's registers. -config SMSC_PHY - tristate "Drivers for SMSC PHYs" - ---help--- - Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs + Currently, only 8-bit registers are supported. -config BCM_NET_PHYLIB +config MDIO_CAVIUM tristate -config BROADCOM_PHY - tristate "Drivers for Broadcom PHYs" - select BCM_NET_PHYLIB +config MDIO_GPIO + tristate "Support for GPIO lib-based bitbanged MDIO buses" + depends on MDIO_BITBANG && GPIOLIB ---help--- - Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, - BCM5481 and BCM5482 PHYs. + Supports GPIO lib-based MDIO busses. -config BCM_CYGNUS_PHY - tristate "Drivers for Broadcom Cygnus SoC internal PHY" - depends on ARCH_BCM_CYGNUS || COMPILE_TEST - depends on MDIO_BCM_IPROC - select BCM_NET_PHYLIB + To compile this driver as a module, choose M here: the module + will be called mdio-gpio. + +config MDIO_HISI_FEMAC + tristate "Hisilicon FEMAC MDIO bus controller" + depends on HAS_IOMEM && OF_MDIO + help + This module provides a driver for the MDIO busses found in the + Hisilicon SoC that have an Fast Ethernet MAC. + +config MDIO_MOXART + tristate "MOXA ART MDIO interface support" + depends on ARCH_MOXART + help + This driver supports the MDIO interface found in the network + interface units of the MOXA ART SoC + +config MDIO_OCTEON + tristate "Support for MDIO buses on Octeon and some ThunderX SOCs" + depends on 64BIT + depends on HAS_IOMEM + select MDIO_CAVIUM + help + This module provides a driver for the Octeon and ThunderX MDIO + buses. It is required by the Octeon and ThunderX ethernet device + drivers on some systems. + +config MDIO_SUN4I + tristate "Allwinner sun4i MDIO interface support" + depends on ARCH_SUNXI + help + This driver supports the MDIO interface found in the network + interface units of the Allwinner SoC that have an EMAC (A10, + A12, A10s, etc.) + +config MDIO_THUNDER + tristate "Support for MDIO buses on ThunderX SOCs" + depends on 64BIT + depends on PCI + select MDIO_CAVIUM + help + This driver supports the MDIO interfaces found on Cavium + ThunderX SoCs when the MDIO bus device appears as a PCI + device. + +config MDIO_XGENE + tristate "APM X-Gene SoC MDIO bus controller" + help + This module provides a driver for the MDIO busses found in the + APM X-Gene SoC's. + +comment "MII PHY device drivers" + +config AMD_PHY + tristate "Drivers for the AMD PHYs" ---help--- - This PHY driver is for the 1G internal PHYs of the Broadcom - Cygnus Family SoC. + Currently supports the am79c874 - Currently supports internal PHY's used in the BCM11300, - BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, - BCM58303 & BCM58305 Broadcom Cygnus SoCs. +config AQUANTIA_PHY + tristate "Drivers for the Aquantia PHYs" + ---help--- + Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 + +config AT803X_PHY + tristate "Drivers for Atheros AT803X PHYs" + ---help--- + Currently supports the AT8030 and AT8035 model config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" @@ -114,35 +182,38 @@ config BCM87XX_PHY help Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. -config ICPLUS_PHY - tristate "Drivers for ICPlus PHYs" +config BCM_CYGNUS_PHY + tristate "Drivers for Broadcom Cygnus SoC internal PHY" + depends on ARCH_BCM_CYGNUS || COMPILE_TEST + depends on MDIO_BCM_IPROC + select BCM_NET_PHYLIB ---help--- - Currently supports the IP175C and IP1001 PHYs. + This PHY driver is for the 1G internal PHYs of the Broadcom + Cygnus Family SoC. -config REALTEK_PHY - tristate "Drivers for Realtek PHYs" - ---help--- - Supports the Realtek 821x PHY. + Currently supports internal PHY's used in the BCM11300, + BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, + BCM58303 & BCM58305 Broadcom Cygnus SoCs. -config NATIONAL_PHY - tristate "Drivers for National Semiconductor PHYs" - ---help--- - Currently supports the DP83865 PHY. +config BCM_NET_PHYLIB + tristate -config STE10XP - tristate "Driver for STMicroelectronics STe10Xp PHYs" +config BROADCOM_PHY + tristate "Drivers for Broadcom PHYs" + select BCM_NET_PHYLIB ---help--- - This is the driver for the STe100p and STe101p PHYs. + Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, + BCM5481 and BCM5482 PHYs. -config LSI_ET1011C_PHY - tristate "Driver for LSI ET1011C PHY" +config CICADA_PHY + tristate "Drivers for the Cicada PHYs" ---help--- - Supports the LSI ET1011C PHY. + Currently supports the cis8204 -config MICREL_PHY - tristate "Driver for Micrel PHYs" +config DAVICOM_PHY + tristate "Drivers for Davicom PHYs" ---help--- - Supports the KSZ9021, VSC8201, KS8001 PHYs. + Currently supports dm9161e and dm9131 config DP83848_PHY tristate "Driver for Texas Instruments DP83848 PHY" @@ -154,11 +225,6 @@ config DP83867_PHY ---help--- Currently supports the DP83867 PHY. -config MICROCHIP_PHY - tristate "Drivers for Microchip PHYs" - help - Supports the LAN88XX PHYs. - config FIXED_PHY tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB @@ -169,122 +235,10 @@ config FIXED_PHY Currently tested with mpc866ads and mpc8349e-mitx. -config MDIO_BITBANG - tristate "Support for bitbanged MDIO buses" - help - This module implements the MDIO bus protocol in software, - for use by low level drivers that export the ability to - drive the relevant pins. - - If in doubt, say N. - -config MDIO_GPIO - tristate "Support for GPIO lib-based bitbanged MDIO buses" - depends on MDIO_BITBANG && GPIOLIB +config ICPLUS_PHY + tristate "Drivers for ICPlus PHYs" ---help--- - Supports GPIO lib-based MDIO busses. - - To compile this driver as a module, choose M here: the module - will be called mdio-gpio. - -config MDIO_CAVIUM - tristate - -config MDIO_OCTEON - tristate "Support for MDIO buses on Octeon and some ThunderX SOCs" - depends on 64BIT - depends on HAS_IOMEM - select MDIO_CAVIUM - help - This module provides a driver for the Octeon and ThunderX MDIO - buses. It is required by the Octeon and ThunderX ethernet device - drivers on some systems. - -config MDIO_THUNDER - tristate "Support for MDIO buses on ThunderX SOCs" - depends on 64BIT - depends on PCI - select MDIO_CAVIUM - help - This driver supports the MDIO interfaces found on Cavium - ThunderX SoCs when the MDIO bus device appears as a PCI - device. - - -config MDIO_SUN4I - tristate "Allwinner sun4i MDIO interface support" - depends on ARCH_SUNXI - help - This driver supports the MDIO interface found in the network - interface units of the Allwinner SoC that have an EMAC (A10, - A12, A10s, etc.) - -config MDIO_MOXART - tristate "MOXA ART MDIO interface support" - depends on ARCH_MOXART - help - This driver supports the MDIO interface found in the network - interface units of the MOXA ART SoC - -config MDIO_BUS_MUX - tristate - depends on OF_MDIO - help - This module provides a driver framework for MDIO bus - multiplexers which connect one of several child MDIO busses - to a parent bus. Switching between child busses is done by - device specific drivers. - -config MDIO_BUS_MUX_GPIO - tristate "Support for GPIO controlled MDIO bus multiplexers" - depends on OF_GPIO && OF_MDIO - select MDIO_BUS_MUX - help - This module provides a driver for MDIO bus multiplexers that - are controlled via GPIO lines. The multiplexer connects one of - several child MDIO busses to a parent bus. Child bus - selection is under the control of GPIO lines. - -config MDIO_BUS_MUX_MMIOREG - tristate "Support for MMIO device-controlled MDIO bus multiplexers" - depends on OF_MDIO && HAS_IOMEM - select MDIO_BUS_MUX - help - This module provides a driver for MDIO bus multiplexers that - are controlled via a simple memory-mapped device, like an FPGA. - The multiplexer connects one of several child MDIO busses to a - parent bus. Child bus selection is under the control of one of - the FPGA's registers. - - Currently, only 8-bit registers are supported. - -config MDIO_BUS_MUX_BCM_IPROC - tristate "Support for iProc based MDIO bus multiplexers" - depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST) - select MDIO_BUS_MUX - default ARCH_BCM_IPROC - help - This module provides a driver for MDIO bus multiplexers found in - iProc based Broadcom SoCs. This multiplexer connects one of several - child MDIO bus to a parent bus. Buses could be internal as well as - external and selection logic lies inside the same multiplexer. - -config MDIO_BCM_UNIMAC - tristate "Broadcom UniMAC MDIO bus controller" - depends on HAS_IOMEM - help - This module provides a driver for the Broadcom UniMAC MDIO busses. - This hardware can be found in the Broadcom GENET Ethernet MAC - controllers as well as some Broadcom Ethernet switches such as the - Starfighter 2 switches. - -config MDIO_BCM_IPROC - tristate "Broadcom iProc MDIO bus controller" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM && OF_MDIO - help - This module provides a driver for the MDIO busses found in the - Broadcom iProc SoC's. + Currently supports the IP175C and IP1001 PHYs. config INTEL_XWAY_PHY tristate "Driver for Intel XWAY PHYs" @@ -294,24 +248,71 @@ config INTEL_XWAY_PHY PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel SoCs xRX200, xRX300, xRX330, xRX350 and xRX550. -config MDIO_HISI_FEMAC - tristate "Hisilicon FEMAC MDIO bus controller" - depends on HAS_IOMEM && OF_MDIO - help - This module provides a driver for the MDIO busses found in the - Hisilicon SoC that have an Fast Ethernet MAC. +config LSI_ET1011C_PHY + tristate "Driver for LSI ET1011C PHY" + ---help--- + Supports the LSI ET1011C PHY. -config MDIO_XGENE - tristate "APM X-Gene SoC MDIO bus controller" +config LXT_PHY + tristate "Drivers for the Intel LXT PHYs" + ---help--- + Currently supports the lxt970, lxt971 + +config MARVELL_PHY + tristate "Drivers for Marvell PHYs" + ---help--- + Currently has a driver for the 88E1011S + +config MICREL_PHY + tristate "Driver for Micrel PHYs" + ---help--- + Supports the KSZ9021, VSC8201, KS8001 PHYs. + +config MICROCHIP_PHY + tristate "Drivers for Microchip PHYs" help - This module provides a driver for the MDIO busses found in the - APM X-Gene SoC's. + Supports the LAN88XX PHYs. config MICROSEMI_PHY tristate "Drivers for the Microsemi PHYs" ---help--- Currently supports the VSC8531 and VSC8541 PHYs +config NATIONAL_PHY + tristate "Drivers for National Semiconductor PHYs" + ---help--- + Currently supports the DP83865 PHY. + +config QSEMI_PHY + tristate "Drivers for Quality Semiconductor PHYs" + ---help--- + Currently supports the qs6612 + +config REALTEK_PHY + tristate "Drivers for Realtek PHYs" + ---help--- + Supports the Realtek 821x PHY. + +config SMSC_PHY + tristate "Drivers for SMSC PHYs" + ---help--- + Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs + +config STE10XP + tristate "Driver for STMicroelectronics STe10Xp PHYs" + ---help--- + This is the driver for the STe100p and STe101p PHYs. + +config TERANETICS_PHY + tristate "Drivers for the Teranetics PHYs" + ---help--- + Currently supports the Teranetics TN2020 + +config VITESSE_PHY + tristate "Drivers for the Vitesse PHYs" + ---help--- + Currently supports the vsc8244 + config XILINX_GMII2RGMII tristate "Xilinx GMII2RGMII converter driver" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 73d65ce04454..e58667d111e7 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -1,53 +1,55 @@ -# Makefile for Linux PHY drivers +# Makefile for Linux PHY drivers and MDIO bus drivers libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o libphy-$(CONFIG_SWPHY) += swphy.o obj-$(CONFIG_PHYLIB) += libphy.o + +obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o +obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o +obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o +obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o +obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o +obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o +obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o +obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o +obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o +obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o +obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o +obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o +obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o +obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o +obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o + +obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o -obj-$(CONFIG_MARVELL_PHY) += marvell.o -obj-$(CONFIG_DAVICOM_PHY) += davicom.o -obj-$(CONFIG_CICADA_PHY) += cicada.o -obj-$(CONFIG_LXT_PHY) += lxt.o -obj-$(CONFIG_QSEMI_PHY) += qsemi.o -obj-$(CONFIG_SMSC_PHY) += smsc.o -obj-$(CONFIG_MICROSEMI_PHY) += mscc.o -obj-$(CONFIG_TERANETICS_PHY) += teranetics.o -obj-$(CONFIG_VITESSE_PHY) += vitesse.o -obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o -obj-$(CONFIG_BROADCOM_PHY) += broadcom.o +obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o -obj-$(CONFIG_ICPLUS_PHY) += icplus.o -obj-$(CONFIG_REALTEK_PHY) += realtek.o -obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -obj-$(CONFIG_FIXED_PHY) += fixed_phy.o -obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o -obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o -obj-$(CONFIG_NATIONAL_PHY) += national.o +obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o +obj-$(CONFIG_BROADCOM_PHY) += broadcom.o +obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_DP83848_PHY) += dp83848.o obj-$(CONFIG_DP83867_PHY) += dp83867.o -obj-$(CONFIG_STE10XP) += ste10Xp.o -obj-$(CONFIG_MICREL_PHY) += micrel.o -obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o -obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o -obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o +obj-$(CONFIG_FIXED_PHY) += fixed_phy.o +obj-$(CONFIG_ICPLUS_PHY) += icplus.o +obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o +obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o +obj-$(CONFIG_LXT_PHY) += lxt.o +obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o -obj-$(CONFIG_AT803X_PHY) += at803x.o -obj-$(CONFIG_AMD_PHY) += amd.o -obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o -obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o -obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o -obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o -obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o -obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o -obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o +obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MICROCHIP_PHY) += microchip.o -obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o -obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o -obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o -obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o +obj-$(CONFIG_MICROSEMI_PHY) += mscc.o +obj-$(CONFIG_NATIONAL_PHY) += national.o +obj-$(CONFIG_QSEMI_PHY) += qsemi.o +obj-$(CONFIG_REALTEK_PHY) += realtek.o +obj-$(CONFIG_SMSC_PHY) += smsc.o +obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_TERANETICS_PHY) += teranetics.o +obj-$(CONFIG_VITESSE_PHY) += vitesse.o obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o |