diff options
Diffstat (limited to 'drivers/net/sk98lin/skgesirq.c')
| -rw-r--r-- | drivers/net/sk98lin/skgesirq.c | 2229 |
1 files changed, 2229 insertions, 0 deletions
diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c new file mode 100644 index 000000000000..3e7aa49afd00 --- /dev/null +++ b/drivers/net/sk98lin/skgesirq.c @@ -0,0 +1,2229 @@ +/****************************************************************************** + * + * Name: skgesirq.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.92 $ + * Date: $Date: 2003/09/16 14:37:07 $ + * Purpose: Special IRQ module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * Special Interrupt handler + * + * The following abstract should show how this module is included + * in the driver path: + * + * In the ISR of the driver the bits for frame transmission complete and + * for receive complete are checked and handled by the driver itself. + * The bits of the slow path mask are checked after that and then the + * entry into the so-called "slow path" is prepared. It is an implementors + * decision whether this is executed directly or just scheduled by + * disabling the mask. In the interrupt service routine some events may be + * generated, so it would be a good idea to call the EventDispatcher + * right after this ISR. + * + * The Interrupt source register of the adapter is NOT read by this module. + * SO if the drivers implementor needs a while loop around the + * slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for + * each loop entered. + * + * However, the MAC Interrupt status registers are read in a while loop. + * + */ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#ifndef SK_SLIM +#include "h/skgepnmi.h" /* PNMI Definitions */ +#include "h/skrlmt.h" /* RLMT Definitions */ +#endif +#include "h/skdrv2nd.h" /* Adapter Control and Driver specific Def. */ + +/* local function prototypes */ +#ifdef GENESIS +static int SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16); +#endif /* GENESIS */ +#ifdef YUKON +static int SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16); +#endif /* YUKON */ +#ifdef OTHER_PHY +static int SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16); +#endif /* OTHER_PHY */ + +#ifdef GENESIS +/* + * array of Rx counter from XMAC which are checked + * in AutoSense mode to check whether a link is not able to auto-negotiate. + */ +static const SK_U16 SkGeRxRegs[]= { + XM_RXF_64B, + XM_RXF_127B, + XM_RXF_255B, + XM_RXF_511B, + XM_RXF_1023B, + XM_RXF_MAX_SZ +} ; +#endif /* GENESIS */ + +#ifdef __C2MAN__ +/* + * Special IRQ function + * + * General Description: + * + */ +intro() +{} +#endif + +/****************************************************************************** + * + * SkHWInitDefSense() - Default Autosensing mode initialization + * + * Description: sets the PLinkMode for HWInit + * + * Returns: N/A + */ +static void SkHWInitDefSense( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) { + pPrt->PLinkMode = pPrt->PLinkModeConf; + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoSensing: First mode %d on Port %d\n", + (int)SK_LMODE_AUTOFULL, Port)); + + pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; + + return; +} /* SkHWInitDefSense */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkHWSenseGetNext() - Get Next Autosensing Mode + * + * Description: gets the appropriate next mode + * + * Note: + * + */ +static SK_U8 SkHWSenseGetNext( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { + /* Leave all as configured */ + return(pPrt->PLinkModeConf); + } + + if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) { + /* Return next mode AUTOBOTH */ + return ((SK_U8)SK_LMODE_AUTOBOTH); + } + + /* Return default autofull */ + return ((SK_U8)SK_LMODE_AUTOFULL); +} /* SkHWSenseGetNext */ + + +/****************************************************************************** + * + * SkHWSenseSetNext() - Autosensing Set next mode + * + * Description: sets the appropriate next mode + * + * Returns: N/A + */ +static void SkHWSenseSetNext( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U8 NewMode) /* New Mode to be written in sense mode */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoSensing: next mode %d on Port %d\n", + (int)NewMode, Port)); + + pPrt->PLinkMode = NewMode; + + return; +} /* SkHWSenseSetNext */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkHWLinkDown() - Link Down handling + * + * Description: handles the hardware link down signal + * + * Returns: N/A + */ +void SkHWLinkDown( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Disable all MAC interrupts */ + SkMacIrqDisable(pAC, IoC, Port); + + /* Disable Receiver and Transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + + /* Init default sense mode */ + SkHWInitDefSense(pAC, IoC, Port); + + if (pPrt->PHWLinkUp == SK_FALSE) { + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link down Port %d\n", Port)); + + /* Set Link to DOWN */ + pPrt->PHWLinkUp = SK_FALSE; + + /* Reset Port stati */ + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED; + + /* Re-init Phy especially when the AutoSense default is set now */ + SkMacInitPhy(pAC, IoC, Port, SK_FALSE); + + /* GP0: used for workaround of Rev. C Errata 2 */ + + /* Do NOT signal to RLMT */ + + /* Do NOT start the timer here */ +} /* SkHWLinkDown */ + + +/****************************************************************************** + * + * SkHWLinkUp() - Link Up handling + * + * Description: handles the hardware link up signal + * + * Returns: N/A + */ +static void SkHWLinkUp( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + /* We do NOT need to proceed on active link */ + return; + } + + pPrt->PHWLinkUp = SK_TRUE; + pPrt->PAutoNegFail = SK_FALSE; + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + + if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF && + pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL && + pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) { + /* Link is up and no Auto-negotiation should be done */ + + /* Link speed should be the configured one */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + /* default is 1000 Mbps */ + case SK_LSPEED_1000MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + break; + case SK_LSPEED_100MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; + break; + case SK_LSPEED_10MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; + break; + } + + /* Set Link Mode Status */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF; + } + + /* No flow control without auto-negotiation */ + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + + /* enable Rx/Tx */ + (void)SkMacRxTxEnable(pAC, IoC, Port); + } +} /* SkHWLinkUp */ + + +/****************************************************************************** + * + * SkMacParity() - MAC parity workaround + * + * Description: handles MAC parity errors correctly + * + * Returns: N/A + */ +static void SkMacParity( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index of the port failed */ +{ + SK_EVPARA Para; + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U32 TxMax; /* Tx Max Size Counter */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Clear IRQ Tx Parity Error */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), + (SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON && + pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE)); + } +#endif /* YUKON */ + + if (pPrt->PCheckPar) { + + if (Port == MAC_1) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG); + } + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = Port; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + return; + } + + /* Check whether frames with a size of 1k were sent */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, Port); + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax); + } +#endif /* YUKON */ + + if (TxMax > 0) { + /* From now on check the parity */ + pPrt->PCheckPar = SK_TRUE; + } +} /* SkMacParity */ + + +/****************************************************************************** + * + * SkGeHwErr() - Hardware Error service routine + * + * Description: handles all HW Error interrupts + * + * Returns: N/A + */ +static void SkGeHwErr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +SK_U32 HwStatus) /* Interrupt status word */ +{ + SK_EVPARA Para; + SK_U16 Word; + + if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) { + /* PCI Errors occured */ + if ((HwStatus & IS_IRQ_STAT) != 0) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG); + } + + /* Reset all bits in the PCI STATUS register */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + if ((HwStatus & IS_NO_STAT_M1) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT); + } + + if ((HwStatus & IS_NO_STAT_M2) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT); + } + + if ((HwStatus & IS_NO_TIST_M1) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST); + } + + if ((HwStatus & IS_NO_TIST_M2) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* This is necessary only for Rx timing measurements */ + if ((HwStatus & IS_IRQ_TIST_OV) != 0) { + /* increment Time Stamp Timer counter (high) */ + pAC->GIni.GITimeStampCnt++; + + /* Clear Time Stamp Timer IRQ */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ); + } + + if ((HwStatus & IS_IRQ_SENSOR) != 0) { + /* no sensors on 32-bit Yukon */ + if (pAC->GIni.GIYukon32Bit) { + /* disable HW Error IRQ */ + pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; + } + } + } +#endif /* YUKON */ + + if ((HwStatus & IS_RAM_RD_PAR) != 0) { + SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR); + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG); + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + + if ((HwStatus & IS_RAM_WR_PAR) != 0) { + SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR); + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG); + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + + if ((HwStatus & IS_M1_PAR_ERR) != 0) { + SkMacParity(pAC, IoC, MAC_1); + } + + if ((HwStatus & IS_M2_PAR_ERR) != 0) { + SkMacParity(pAC, IoC, MAC_2); + } + + if ((HwStatus & IS_R1_PAR_ERR) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P); + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((HwStatus & IS_R2_PAR_ERR) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P); + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } +} /* SkGeHwErr */ + + +/****************************************************************************** + * + * SkGeSirqIsr() - Special Interrupt Service Routine + * + * Description: handles all non data transfer specific interrupts (slow path) + * + * Returns: N/A + */ +void SkGeSirqIsr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +SK_U32 Istatus) /* Interrupt status word */ +{ + SK_EVPARA Para; + SK_U32 RegVal32; /* Read register value */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U16 PhyInt; + int i; + + if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); + + SkGeHwErr(pAC, IoC, RegVal32); + } + + /* + * Packet Timeout interrupts + */ + /* Check whether MACs are correctly initialized */ + if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) && + pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) { + /* MAC 1 was not initialized but Packet timeout occured */ + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004, + SKERR_SIRQ_E004MSG); + } + + if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) && + pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) { + /* MAC 2 was not initialized but Packet timeout occured */ + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005, + SKERR_SIRQ_E005MSG); + } + + if ((Istatus & IS_PA_TO_RX1) != 0) { + /* Means network is filling us up */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002, + SKERR_SIRQ_E002MSG); + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1); + } + + if ((Istatus & IS_PA_TO_RX2) != 0) { + /* Means network is filling us up */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003, + SKERR_SIRQ_E003MSG); + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2); + } + + if ((Istatus & IS_PA_TO_TX1) != 0) { + + pPrt = &pAC->GIni.GP[0]; + + /* May be a normal situation in a server with a slow network */ + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* + * workaround: if in half duplex mode, check for Tx hangup. + * Read number of TX'ed bytes, wait for 10 ms, then compare + * the number with current value. If nothing changed, we assume + * that Tx is hanging and do a FIFO flush (see event routine). + */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && + !pPrt->HalfDupTimerActive) { + /* + * many more pack. arb. timeouts may come in between, + * we ignore those + */ + pPrt->HalfDupTimerActive = SK_TRUE; + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, 0); + + (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32); + + pPrt->LastOctets = (SK_U64)RegVal32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32); + + pPrt->LastOctets += RegVal32; + + Para.Para32[0] = 0; + SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, + SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); + } + } +#endif /* GENESIS */ + } + + if ((Istatus & IS_PA_TO_TX2) != 0) { + + pPrt = &pAC->GIni.GP[1]; + + /* May be a normal situation in a server with a slow network */ + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* workaround: see above */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && + !pPrt->HalfDupTimerActive) { + pPrt->HalfDupTimerActive = SK_TRUE; + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, 1); + + (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32); + + pPrt->LastOctets = (SK_U64)RegVal32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32); + + pPrt->LastOctets += RegVal32; + + Para.Para32[0] = 1; + SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, + SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); + } + } +#endif /* GENESIS */ + } + + /* Check interrupts of the particular queues */ + if ((Istatus & IS_R1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006, + SKERR_SIRQ_E006MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_R2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007, + SKERR_SIRQ_E007MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XS1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008, + SKERR_SIRQ_E008MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XA1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009, + SKERR_SIRQ_E009MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XS2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010, + SKERR_SIRQ_E010MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XA2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011, + SKERR_SIRQ_E011MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + /* External reg interrupt */ + if ((Istatus & IS_EXT_REG) != 0) { + /* Test IRQs from PHY */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + pPrt = &pAC->GIni.GP[i]; + + if (pPrt->PState == SK_PRT_RESET) { + continue; + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + break; + + case SK_PHY_BCOM: + SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt); + + if ((PhyInt & ~PHY_B_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Bcom Int: 0x%04X\n", + i, PhyInt)); + SkPhyIsrBcom(pAC, IoC, i, PhyInt); + } + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt); + + if ((PhyInt & PHY_L_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Lone Int: %x\n", + i, PhyInt)); + SkPhyIsrLone(pAC, IoC, i, PhyInt); + } + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Read PHY Interrupt Status */ + SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt); + + if ((PhyInt & PHY_M_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Marv Int: 0x%04X\n", + i, PhyInt)); + SkPhyIsrGmac(pAC, IoC, i, PhyInt); + } + } +#endif /* YUKON */ + } + } + + /* I2C Ready interrupt */ + if ((Istatus & IS_I2C_READY) != 0) { +#ifdef SK_SLIM + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); +#else + SkI2cIsr(pAC, IoC); +#endif + } + + /* SW forced interrupt */ + if ((Istatus & IS_IRQ_SW) != 0) { + /* clear the software IRQ */ + SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ); + } + + if ((Istatus & IS_LNK_SYNC_M1) != 0) { + /* + * We do NOT need the Link Sync interrupt, because it shows + * us only a link going down. + */ + /* clear interrupt */ + SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ); + } + + /* Check MAC after link sync counter */ + if ((Istatus & IS_MAC1) != 0) { + /* IRQ from MAC 1 */ + SkMacIrq(pAC, IoC, MAC_1); + } + + if ((Istatus & IS_LNK_SYNC_M2) != 0) { + /* + * We do NOT need the Link Sync interrupt, because it shows + * us only a link going down. + */ + /* clear interrupt */ + SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ); + } + + /* Check MAC after link sync counter */ + if ((Istatus & IS_MAC2) != 0) { + /* IRQ from MAC 2 */ + SkMacIrq(pAC, IoC, MAC_2); + } + + /* Timer interrupt (served last) */ + if ((Istatus & IS_TIMINT) != 0) { + /* check for HW Errors */ + if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); + + SkGeHwErr(pAC, IoC, RegVal32); + } + + SkHwtIsr(pAC, IoC); + } + +} /* SkGeSirqIsr */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2 + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + */ +static int SkGePortCheckShorts( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port) /* Which port should be checked */ +{ + SK_U32 Shorts; /* Short Event Counter */ + SK_U32 CheckShorts; /* Check value for Short Event Counter */ + SK_U64 RxCts; /* Rx Counter (packets on network) */ + SK_U32 RxTmp; /* Rx temp. Counter */ + SK_U32 FcsErrCts; /* FCS Error Counter */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Rtv; /* Return value */ + int i; + + pPrt = &pAC->GIni.GP[Port]; + + /* Default: no action */ + Rtv = SK_HW_PS_NONE; + + (void)SkXmUpdateStats(pAC, IoC, Port); + + /* Extra precaution: check for short Event counter */ + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); + + /* + * Read Rx counters (packets seen on the network and not necessarily + * really received. + */ + RxCts = 0; + + for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) { + + (void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp); + + RxCts += (SK_U64)RxTmp; + } + + /* On default: check shorts against zero */ + CheckShorts = 0; + + /* Extra precaution on active links */ + if (pPrt->PHWLinkUp) { + /* Reset Link Restart counter */ + pPrt->PLinkResCt = 0; + pPrt->PAutoNegTOCt = 0; + + /* If link is up check for 2 */ + CheckShorts = 2; + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts); + + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN && + (pPrt->PLinkMode == SK_LMODE_HALF || + pPrt->PLinkMode == SK_LMODE_FULL)) { + /* + * This is autosensing and we are in the fallback + * manual full/half duplex mode. + */ + if (RxCts == pPrt->PPrevRx) { + /* Nothing received, restart link */ + pPrt->PPrevFcs = FcsErrCts; + pPrt->PPrevShorts = Shorts; + + return(SK_HW_PS_RESTART); + } + else { + pPrt->PLipaAutoNeg = SK_LIPA_MANUAL; + } + } + + if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) || + (!(FcsErrCts - pPrt->PPrevFcs))) { + /* + * Note: The compare with zero above has to be done the way shown, + * otherwise the Linux driver will have a problem. + */ + /* + * We received a bunch of frames or no CRC error occured on the + * network -> ok. + */ + pPrt->PPrevRx = RxCts; + pPrt->PPrevFcs = FcsErrCts; + pPrt->PPrevShorts = Shorts; + + return(SK_HW_PS_NONE); + } + + pPrt->PPrevFcs = FcsErrCts; + } + + + if ((Shorts - pPrt->PPrevShorts) > CheckShorts) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Short Event Count Restart Port %d \n", Port)); + Rtv = SK_HW_PS_RESTART; + } + + pPrt->PPrevShorts = Shorts; + pPrt->PPrevRx = RxCts; + + return(Rtv); +} /* SkGePortCheckShorts */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkGePortCheckUp() - Check if the link is up + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port) /* Which port should be checked */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */ + int Rtv; /* Return value */ + + Rtv = SK_HW_PS_NONE; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + AutoNeg = SK_FALSE; + } + else { + AutoNeg = SK_TRUE; + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg); + break; + case SK_PHY_BCOM: + Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg); + break; + case SK_PHY_NAT: + Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg); + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg); + } +#endif /* YUKON */ + + return(Rtv); +} /* SkGePortCheckUp */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2 + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpXmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_U32 Shorts; /* Short Event Counter */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U32 GpReg; /* General Purpose register value */ + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 IsrcSum; /* Interrupt source register sum */ + SK_U16 LpAb; /* Link Partner Ability */ + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 ExtStat; /* Extended Status Register */ + SK_U8 NextMode; /* Next AutoSensing Mode */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + if (pPrt->PhyType != SK_PHY_XMAC) { + return(SK_HW_PS_NONE); + } + else { + return(SkGePortCheckShorts(pAC, IoC, Port)); + } + } + + IsrcSum = pPrt->PIsave; + pPrt->PIsave = 0; + + /* Now wait for each port's link */ + if (pPrt->PLinkBroken) { + /* Link was broken */ + XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); + + if ((GpReg & XM_GP_INP_ASS) == 0) { + /* The Link is in sync */ + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); + + if ((Isrc & XM_IS_INP_ASS) == 0) { + /* It has been in sync since last time */ + /* Restart the PORT */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link in sync Restart Port %d\n", Port)); + + (void)SkXmUpdateStats(pAC, IoC, Port); + + /* We now need to reinitialize the PrevShorts counter */ + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); + pPrt->PPrevShorts = Shorts; + + pPrt->PLinkBroken = SK_FALSE; + + /* + * Link Restart Workaround: + * it may be possible that the other Link side + * restarts its link as well an we detect + * another LinkBroken. To prevent this + * happening we check for a maximum number + * of consecutive restart. If those happens, + * we do NOT restart the active link and + * check whether the link is now o.k. + */ + pPrt->PLinkResCt++; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkResCt < SK_MAX_LRESTART) { + return(SK_HW_PS_RESTART); + } + + pPrt->PLinkResCt = 0; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum)); + } + else { + pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum)); + + /* Do nothing more if link is broken */ + return(SK_HW_PS_NONE); + } + } + else { + /* Do nothing more if link is broken */ + return(SK_HW_PS_NONE); + } + + } + else { + /* Link was not broken, check if it is */ + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + pPrt->PLinkBroken = SK_TRUE; + /* Re-Init Link partner Autoneg flag */ + pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link broken Port %d\n", Port)); + + /* Cable removed-> reinit sense mode */ + SkHWInitDefSense(pAC, IoC, Port); + + return(SK_HW_PS_RESTART); + } + } + } + else { + SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc); + + if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) { + return(SK_HW_PS_RESTART); + } + } + } + + /* + * here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + + SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); + + if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) { + if ((GpReg & XM_GP_INP_ASS) == 0) { + /* Save Auto-negotiation Done interrupt only if link is in sync */ + pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); + } +#ifdef DEBUG + if ((pPrt->PIsave & XM_IS_AND) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done rescheduled Port %d\n", Port)); + } +#endif /* DEBUG */ + return(SK_HW_PS_NONE); + } + + if (AutoNeg) { + if ((IsrcSum & XM_IS_AND) != 0) { + SkHWLinkUp(pAC, IoC, Port); + Done = SkMacAutoNegDone(pAC, IoC, Port); + if (Done != SK_AND_OK) { + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n", + Port, LpAb, ResAb)); + + /* Try next possible mode */ + NextMode = SkHWSenseGetNext(pAC, IoC, Port); + SkHWLinkDown(pAC, IoC, Port); + if (Done == SK_AND_DUP_CAP) { + /* GoTo next mode */ + SkHWSenseSetNext(pAC, IoC, Port, NextMode); + } + + return(SK_HW_PS_RESTART); + } + /* + * Dummy Read extended status to prevent extra link down/ups + * (clear Page Received bit if set) + */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat); + + return(SK_HW_PS_LINK); + } + + /* AutoNeg not done, but HW link is up. Check for timeouts */ + pPrt->PAutoNegTimeOut++; + if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { + /* Increase the Timeout counter */ + pPrt->PAutoNegTOCt++; + + /* Timeout occured */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoNeg timeout Port %d\n", Port)); + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { + /* Set Link manually up */ + SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Set manual full duplex Port %d\n", Port)); + } + + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg == SK_LIPA_AUTO && + pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) { + /* + * This is rather complicated. + * we need to check here whether the LIPA_AUTO + * we saw before is false alert. We saw at one + * switch ( SR8800) that on boot time it sends + * just one auto-neg packet and does no further + * auto-negotiation. + * Solution: we restart the autosensing after + * a few timeouts. + */ + pPrt->PAutoNegTOCt = 0; + pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; + SkHWInitDefSense(pAC, IoC, Port); + } + + /* Do the restart */ + return(SK_HW_PS_RESTART); + } + } + else { + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + /* + * Link sync (GP) and so assume a good connection. But if not received + * a bunch of frames received in a time slot (maybe broken tx cable) + * the port is restart. + */ + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpXmac */ + + +/****************************************************************************** + * + * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpBcom( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 PhyStat; /* Phy Status Register */ + SK_U16 ResAb; /* Master/Slave resolution */ + SK_U16 Ctrl; /* Broadcom control flags */ +#ifdef DEBUG + SK_U16 LpAb; + SK_U16 ExtStat; +#endif /* DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Check for No HCD Link events (#10523) */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc); + +#ifdef xDEBUG + if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) == + (PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) { + + SK_U32 Stat1, Stat2, Stat3; + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp1 - Stat: %x, Mask: %x", + (void *)Isrc, + (void *)Stat1); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "Ctrl/Stat: %x, AN Adv/LP: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + } +#endif /* DEBUG */ + + if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) { + /* + * Workaround BCom Errata: + * enable and disable loopback mode if "NO HCD" occurs. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, + (SK_U16)(Ctrl | PHY_CT_LOOP)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, + (SK_U16)(Ctrl & ~PHY_CT_LOOP)); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("No HCD Link event, Port %d\n", Port)); +#ifdef xDEBUG + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "No HCD link event, port %d.", + (void *)Port, + (void *)NULL); +#endif /* DEBUG */ + } + + /* Not obsolete: link status bit is latched to 0 and autoclearing! */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + +#ifdef xDEBUG + { + SK_U32 Stat1, Stat2, Stat3; + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp1a - Stat: %x, Mask: %x", + (void *)Isrc, + (void *)Stat1); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + Stat1 = Stat1 << 16 | PhyStat; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "Ctrl/Stat: %x, AN Adv/LP: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); + Stat2 = Stat2 << 16 | ResAb; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + } +#endif /* DEBUG */ + + /* + * Here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); + + if ((ResAb & PHY_B_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault port %d\n", Port)); + + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + + return(SK_HW_PS_RESTART); + } + + if ((PhyStat & PHY_ST_LSYNC) == 0) { + return(SK_HW_PS_NONE); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Port %d, ResAb: 0x%04X\n", Port, ResAb)); + + if (AutoNeg) { + if ((PhyStat & PHY_ST_AN_OVER) != 0) { + + SkHWLinkUp(pAC, IoC, Port); + + Done = SkMacAutoNegDone(pAC, IoC, Port); + + if (Done != SK_AND_OK) { +#ifdef DEBUG + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", + Port, LpAb, ExtStat)); +#endif /* DEBUG */ + return(SK_HW_PS_RESTART); + } + else { +#ifdef xDEBUG + /* Dummy read ISR to prevent extra link downs/ups */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); + + if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp2 - Stat: %x", + (void *)ExtStat, + (void *)NULL); + } +#endif /* DEBUG */ + return(SK_HW_PS_LINK); + } + } + } + else { /* !AutoNeg */ + /* Link is up and we don't need more. */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + +#ifdef xDEBUG + /* Dummy read ISR to prevent extra link downs/ups */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); + + if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp3 - Stat: %x", + (void *)ExtStat, + (void *)NULL); + } +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpGmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 PhyIsrc; /* PHY Interrupt source */ + SK_U16 PhyStat; /* PPY Status */ + SK_U16 PhySpecStat;/* PHY Specific Status */ + SK_U16 ResAb; /* Master/Slave resolution */ + SK_EVPARA Para; +#ifdef DEBUG + SK_U16 Word; /* I/O helper */ +#endif /* DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + + /* Read PHY Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); + + /* Read PHY Interrupt Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc); + + if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); + + if ((ResAb & PHY_B_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault port %d\n", Port)); + + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + + return(SK_HW_PS_RESTART); + } + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat)); + +#ifdef DEBUG + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word); + + if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 || + (PhySpecStat & PHY_M_PS_PAGE_REC) != 0) { + /* Read PHY Next Page Link Partner */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Page Received, NextPage: 0x%04X\n", Word)); + } +#endif /* DEBUG */ + + if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) { + return(SK_HW_PS_NONE); + } + + if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 || + (PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) { + /* Downshift detected */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG); + + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; + + pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7); + + if (AutoNeg) { + /* Auto-Negotiation Over ? */ + if ((PhyStat & PHY_ST_AN_OVER) != 0) { + + SkHWLinkUp(pAC, IoC, Port); + + Done = SkMacAutoNegDone(pAC, IoC, Port); + + if (Done != SK_AND_OK) { + return(SK_HW_PS_RESTART); + } + + return(SK_HW_PS_LINK); + } + } + else { /* !AutoNeg */ + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync, Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpGmac */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkGePortCheckUpLone() - Check if the link is up on Level One PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpLone( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 LpAb; /* Link Partner Ability */ + SK_U16 ExtStat; /* Extended Status Register */ + SK_U16 PhyStat; /* Phy Status Register */ + SK_U16 StatSum; + SK_U8 NextMode; /* Next AutoSensing Mode */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + + StatSum = pPrt->PIsave; + pPrt->PIsave = 0; + + /* + * here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat); + StatSum |= PhyStat; + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + if ((PhyStat & PHY_ST_LSYNC) == 0) { + /* Save Auto-negotiation Done bit */ + pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER); +#ifdef DEBUG + if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done rescheduled Port %d\n", Port)); + } +#endif /* DEBUG */ + return(SK_HW_PS_NONE); + } + + if (AutoNeg) { + if ((StatSum & PHY_ST_AN_OVER) != 0) { + SkHWLinkUp(pAC, IoC, Port); + Done = SkMacAutoNegDone(pAC, IoC, Port); + if (Done != SK_AND_OK) { + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", + Port, LpAb, ExtStat)); + + /* Try next possible mode */ + NextMode = SkHWSenseGetNext(pAC, IoC, Port); + SkHWLinkDown(pAC, IoC, Port); + if (Done == SK_AND_DUP_CAP) { + /* GoTo next mode */ + SkHWSenseSetNext(pAC, IoC, Port, NextMode); + } + + return(SK_HW_PS_RESTART); + + } + else { + /* + * Dummy Read interrupt status to prevent + * extra link down/ups + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); + return(SK_HW_PS_LINK); + } + } + + /* AutoNeg not done, but HW link is up. Check for timeouts */ + pPrt->PAutoNegTimeOut++; + if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { + /* Timeout occured */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoNeg timeout Port %d\n", Port)); + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { + /* Set Link manually up */ + SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Set manual full duplex Port %d\n", Port)); + } + + /* Do the restart */ + return(SK_HW_PS_RESTART); + } + } + else { + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + + /* + * Dummy Read interrupt status to prevent + * extra link down/ups + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpLone */ + + +/****************************************************************************** + * + * SkGePortCheckUpNat() - Check if the link is up on National PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpNat( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + /* todo: National */ + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkGeSirqEvent() - Event Service Routine + * + * Description: + * + * Notes: + */ +int SkGeSirqEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +SK_U32 Event, /* Module specific Event */ +SK_EVPARA Para) /* Event specific Parameter */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U32 Port; + SK_U32 Val32; + int PortStat; + SK_U8 Val8; +#ifdef GENESIS + SK_U64 Octets; +#endif /* GENESIS */ + + Port = Para.Para32[0]; + pPrt = &pAC->GIni.GP[Port]; + + switch (Event) { + case SK_HWEV_WATIM: + if (pPrt->PState == SK_PRT_RESET) { + + PortStat = SK_HW_PS_NONE; + } + else { + /* Check whether port came up */ + PortStat = SkGePortCheckUp(pAC, IoC, (int)Port); + } + + switch (PortStat) { + case SK_HW_PS_RESTART: + if (pPrt->PHWLinkUp) { + /* Set Link to down */ + SkHWLinkDown(pAC, IoC, (int)Port); + + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + /* Restart needed */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + break; + + case SK_HW_PS_LINK: + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para); + break; + } + + /* Start again the check Timer */ + if (pPrt->PHWLinkUp) { + Val32 = SK_WA_ACT_TIME; + } + else { + Val32 = SK_WA_INA_TIME; + } + + /* Todo: still needed for non-XMAC PHYs??? */ + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32, + SKGE_HWAC, SK_HWEV_WATIM, Para); + break; + + case SK_HWEV_PORT_START: + if (pPrt->PHWLinkUp) { + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + SkHWLinkDown(pAC, IoC, (int)Port); + + /* Schedule Port RESET */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + break; + + case SK_HWEV_PORT_STOP: + if (pPrt->PHWLinkUp) { + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + /* Stop Workaround Timer */ + SkTimerStop(pAC, IoC, &pPrt->PWaTimer); + + SkHWLinkDown(pAC, IoC, (int)Port); + break; + + case SK_HWEV_UPDATE_STAT: + /* We do NOT need to update any statistics */ + break; + + case SK_HWEV_CLEAR_STAT: + /* We do NOT need to clear any statistics */ + for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) { + pPrt->PPrevRx = 0; + pPrt->PPrevFcs = 0; + pPrt->PPrevShorts = 0; + } + break; + + case SK_HWEV_SET_LMODE: + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PLinkModeConf != Val8) { + /* Set New link mode */ + pPrt->PLinkModeConf = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_FLOWMODE: + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PFlowCtrlMode != Val8) { + /* Set New Flow Control mode */ + pPrt->PFlowCtrlMode = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_ROLE: + /* not possible for fiber */ + if (!pAC->GIni.GICopperType) { + break; + } + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PMSMode != Val8) { + /* Set New Role (Master/Slave) mode */ + pPrt->PMSMode = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_SPEED: + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + break; + } + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PLinkSpeed != Val8) { + /* Set New Speed parameter */ + pPrt->PLinkSpeed = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + +#ifdef GENESIS + case SK_HWEV_HALFDUP_CHK: + if (pAC->GIni.GIGenesis) { + /* + * half duplex hangup workaround. + * See packet arbiter timeout interrupt for description + */ + pPrt->HalfDupTimerActive = SK_FALSE; + if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) { + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, Port); + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32); + + Octets = (SK_U64)Val32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32); + + Octets += Val32; + + if (pPrt->LastOctets == Octets) { + /* Tx hanging, a FIFO flush restarts it */ + SkMacFlushTxFifo(pAC, IoC, Port); + } + } + } + break; +#endif /* GENESIS */ + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG); + break; + } + + return(0); +} /* SkGeSirqEvent */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkPhyIsrBcom() - PHY interrupt service routine + * + * Description: handles all interrupts from BCom PHY + * + * Returns: N/A + */ +static void SkPhyIsrBcom( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_EVPARA Para; + + pPrt = &pAC->GIni.GP[Port]; + + if ((IStatus & PHY_B_IS_PSE) != 0) { + /* Incorrectable pair swap error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022, + SKERR_SIRQ_E022MSG); + } + + if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) { + + SkHWLinkDown(pAC, IoC, Port); + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + } + +} /* SkPhyIsrBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkPhyIsrGmac() - PHY interrupt service routine + * + * Description: handles all interrupts from Marvell PHY + * + * Returns: N/A + */ +static void SkPhyIsrGmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_EVPARA Para; + SK_U16 Word; + + pPrt = &pAC->GIni.GP[Port]; + + if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) { + + SkHWLinkDown(pAC, IoC, Port); + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg.Adv: 0x%04X\n", Word)); + + /* Set Auto-negotiation advertisement */ + if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) { + /* restore Asymmetric Pause bit */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, + (SK_U16)(Word | PHY_M_AN_ASP)); + } + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((IStatus & PHY_M_IS_AN_ERROR) != 0) { + /* Auto-Negotiation Error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG); + } + + if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) { + /* FIFO Overflow/Underrun Error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG); + } + +} /* SkPhyIsrGmac */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkPhyIsrLone() - PHY interrupt service routine + * + * Description: handles all interrupts from LONE PHY + * + * Returns: N/A + */ +static void SkPhyIsrLone( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_EVPARA Para; + + if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) { + + SkHWLinkDown(pAC, IoC, Port); + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + +} /* SkPhyIsrLone */ +#endif /* OTHER_PHY */ + +/* End of File */ |