diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 467 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h | 27 |
2 files changed, 231 insertions, 263 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index d7696d377cd6..c9b3f8c0e926 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -47,6 +47,12 @@ #define SDIOH_API_ACCESS_RETRY_LIMIT 2 +#define SDIO_VENDOR_ID_BROADCOM 0x02d0 + +#define DMA_ALIGN_MASK 0x03 + +#define SDIO_FUNC1_BLOCKSIZE 64 +#define SDIO_FUNC2_BLOCKSIZE 512 static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id) { @@ -83,6 +89,25 @@ static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func) { } +static bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev) +{ + bool is_err = false; +#ifdef CONFIG_PM_SLEEP + is_err = atomic_read(&sdiodev->suspend); +#endif + return is_err; +} + +static void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, + wait_queue_head_t *wq) +{ +#ifdef CONFIG_PM_SLEEP + int retry = 0; + while (atomic_read(&sdiodev->suspend) && retry++ != 30) + wait_event_timeout(*wq, false, HZ/100); +#endif +} + int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev) { int ret = 0; @@ -169,6 +194,144 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev) return 0; } +static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, + uint regaddr, u8 *byte) +{ + struct sdio_func *sdfunc = sdiodev->func[0]; + int err_ret; + + /* + * Can only directly write to some F0 registers. + * Handle F2 enable/disable and Abort command + * as a special case. + */ + if (regaddr == SDIO_CCCR_IOEx) { + sdfunc = sdiodev->func[2]; + if (sdfunc) { + if (*byte & SDIO_FUNC_ENABLE_2) { + /* Enable Function 2 */ + err_ret = sdio_enable_func(sdfunc); + if (err_ret) + brcmf_err("enable F2 failed:%d\n", + err_ret); + } else { + /* Disable Function 2 */ + err_ret = sdio_disable_func(sdfunc); + if (err_ret) + brcmf_err("Disable F2 failed:%d\n", + err_ret); + } + } else { + err_ret = -ENOENT; + } + } else if ((regaddr == SDIO_CCCR_ABORT) || + (regaddr == SDIO_CCCR_IENx)) { + sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), + GFP_KERNEL); + if (!sdfunc) + return -ENOMEM; + sdfunc->num = 0; + sdio_writeb(sdfunc, *byte, regaddr, &err_ret); + kfree(sdfunc); + } else if (regaddr < 0xF0) { + brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr); + err_ret = -EPERM; + } else { + sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret); + } + + return err_ret; +} + +static int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, + uint func, uint regaddr, u8 *byte) +{ + int err_ret; + + brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr); + + brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait); + if (brcmf_pm_resume_error(sdiodev)) + return -EIO; + + if (rw && func == 0) { + /* handle F0 separately */ + err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte); + } else { + if (rw) /* CMD52 Write */ + sdio_writeb(sdiodev->func[func], *byte, regaddr, + &err_ret); + else if (func == 0) { + *byte = sdio_f0_readb(sdiodev->func[func], regaddr, + &err_ret); + } else { + *byte = sdio_readb(sdiodev->func[func], regaddr, + &err_ret); + } + } + + if (err_ret) { + /* + * SleepCSR register access can fail when + * waking up the device so reduce this noise + * in the logs. + */ + if (regaddr != SBSDIO_FUNC1_SLEEPCSR) + brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", + rw ? "write" : "read", func, regaddr, *byte, + err_ret); + else + brcmf_dbg(SDIO, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", + rw ? "write" : "read", func, regaddr, *byte, + err_ret); + } + return err_ret; +} + +static int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw, + uint func, uint addr, u32 *word, + uint nbytes) +{ + int err_ret = -EIO; + + if (func == 0) { + brcmf_err("Only CMD52 allowed to F0\n"); + return -EINVAL; + } + + brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", + rw, func, addr, nbytes); + + brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait); + if (brcmf_pm_resume_error(sdiodev)) + return -EIO; + + if (rw) { /* CMD52 Write */ + if (nbytes == 4) + sdio_writel(sdiodev->func[func], *word, addr, + &err_ret); + else if (nbytes == 2) + sdio_writew(sdiodev->func[func], (*word & 0xFFFF), + addr, &err_ret); + else + brcmf_err("Invalid nbytes: %d\n", nbytes); + } else { /* CMD52 Read */ + if (nbytes == 4) + *word = sdio_readl(sdiodev->func[func], addr, &err_ret); + else if (nbytes == 2) + *word = sdio_readw(sdiodev->func[func], addr, + &err_ret) & 0xFFFF; + else + brcmf_err("Invalid nbytes: %d\n", nbytes); + } + + if (err_ret) + brcmf_err("Failed to %s word, Err: 0x%08x\n", + rw ? "write" : "read", err_ret); + + return err_ret; +} + static int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) { @@ -757,237 +920,6 @@ int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn) return 0; } -int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) -{ - u32 regs = 0; - int ret = 0; - - ret = brcmf_sdioh_attach(sdiodev); - if (ret) - goto out; - - regs = SI_ENUM_BASE; - - /* try to attach to the target device */ - sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev); - if (!sdiodev->bus) { - brcmf_err("device attach failed\n"); - ret = -ENODEV; - goto out; - } - -out: - if (ret) - brcmf_sdio_remove(sdiodev); - - return ret; -} - -int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev) -{ - sdiodev->bus_if->state = BRCMF_BUS_DOWN; - - if (sdiodev->bus) { - brcmf_sdbrcm_disconnect(sdiodev->bus); - sdiodev->bus = NULL; - } - - brcmf_sdioh_detach(sdiodev); - - sdiodev->sbwad = 0; - - return 0; -} - -void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable) -{ - if (enable) - brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); - else - brcmf_sdbrcm_wd_timer(sdiodev->bus, 0); -} - -#define SDIO_VENDOR_ID_BROADCOM 0x02d0 - -#define DMA_ALIGN_MASK 0x03 - -#define SDIO_FUNC1_BLOCKSIZE 64 -#define SDIO_FUNC2_BLOCKSIZE 512 - -/* devices we support, null terminated */ -static const struct sdio_device_id brcmf_sdmmc_ids[] = { - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, - SDIO_DEVICE_ID_BROADCOM_4335_4339)}, - { /* end: all zeroes */ }, -}; -MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); - -static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; - - -bool -brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev) -{ - bool is_err = false; -#ifdef CONFIG_PM_SLEEP - is_err = atomic_read(&sdiodev->suspend); -#endif - return is_err; -} - -void -brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, wait_queue_head_t *wq) -{ -#ifdef CONFIG_PM_SLEEP - int retry = 0; - while (atomic_read(&sdiodev->suspend) && retry++ != 30) - wait_event_timeout(*wq, false, HZ/100); -#endif -} - -static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, - uint regaddr, u8 *byte) -{ - struct sdio_func *sdfunc = sdiodev->func[0]; - int err_ret; - - /* - * Can only directly write to some F0 registers. - * Handle F2 enable/disable and Abort command - * as a special case. - */ - if (regaddr == SDIO_CCCR_IOEx) { - sdfunc = sdiodev->func[2]; - if (sdfunc) { - if (*byte & SDIO_FUNC_ENABLE_2) { - /* Enable Function 2 */ - err_ret = sdio_enable_func(sdfunc); - if (err_ret) - brcmf_err("enable F2 failed:%d\n", - err_ret); - } else { - /* Disable Function 2 */ - err_ret = sdio_disable_func(sdfunc); - if (err_ret) - brcmf_err("Disable F2 failed:%d\n", - err_ret); - } - } else { - err_ret = -ENOENT; - } - } else if ((regaddr == SDIO_CCCR_ABORT) || - (regaddr == SDIO_CCCR_IENx)) { - sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), - GFP_KERNEL); - if (!sdfunc) - return -ENOMEM; - sdfunc->num = 0; - sdio_writeb(sdfunc, *byte, regaddr, &err_ret); - kfree(sdfunc); - } else if (regaddr < 0xF0) { - brcmf_err("F0 Wr:0x%02x: write disallowed\n", regaddr); - err_ret = -EPERM; - } else { - sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret); - } - - return err_ret; -} - -int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint func, - uint regaddr, u8 *byte) -{ - int err_ret; - - brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x\n", rw, func, regaddr); - - brcmf_pm_resume_wait(sdiodev, &sdiodev->request_byte_wait); - if (brcmf_pm_resume_error(sdiodev)) - return -EIO; - - if (rw && func == 0) { - /* handle F0 separately */ - err_ret = brcmf_sdioh_f0_write_byte(sdiodev, regaddr, byte); - } else { - if (rw) /* CMD52 Write */ - sdio_writeb(sdiodev->func[func], *byte, regaddr, - &err_ret); - else if (func == 0) { - *byte = sdio_f0_readb(sdiodev->func[func], regaddr, - &err_ret); - } else { - *byte = sdio_readb(sdiodev->func[func], regaddr, - &err_ret); - } - } - - if (err_ret) { - /* - * SleepCSR register access can fail when - * waking up the device so reduce this noise - * in the logs. - */ - if (regaddr != SBSDIO_FUNC1_SLEEPCSR) - brcmf_err("Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", - rw ? "write" : "read", func, regaddr, *byte, - err_ret); - else - brcmf_dbg(SDIO, "Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n", - rw ? "write" : "read", func, regaddr, *byte, - err_ret); - } - return err_ret; -} - -int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, - uint rw, uint func, uint addr, u32 *word, - uint nbytes) -{ - int err_ret = -EIO; - - if (func == 0) { - brcmf_err("Only CMD52 allowed to F0\n"); - return -EINVAL; - } - - brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", - rw, func, addr, nbytes); - - brcmf_pm_resume_wait(sdiodev, &sdiodev->request_word_wait); - if (brcmf_pm_resume_error(sdiodev)) - return -EIO; - - if (rw) { /* CMD52 Write */ - if (nbytes == 4) - sdio_writel(sdiodev->func[func], *word, addr, - &err_ret); - else if (nbytes == 2) - sdio_writew(sdiodev->func[func], (*word & 0xFFFF), - addr, &err_ret); - else - brcmf_err("Invalid nbytes: %d\n", nbytes); - } else { /* CMD52 Read */ - if (nbytes == 4) - *word = sdio_readl(sdiodev->func[func], addr, &err_ret); - else if (nbytes == 2) - *word = sdio_readw(sdiodev->func[func], addr, - &err_ret) & 0xFFFF; - else - brcmf_err("Invalid nbytes: %d\n", nbytes); - } - - if (err_ret) - brcmf_err("Failed to %s word, Err: 0x%08x\n", - rw ? "write" : "read", err_ret); - - return err_ret; -} - static int brcmf_sdioh_get_cisaddr(struct brcmf_sdio_dev *sdiodev, u32 regaddr) { /* read 24 bits and return valid 17 bit addr */ @@ -1042,10 +974,7 @@ static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev) return false; } -/* - * Public entry points & extern's - */ -int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev) +static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev) { int err_ret = 0; struct mmc_host *host; @@ -1092,7 +1021,7 @@ out: return err_ret; } -void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev) +static void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev) { brcmf_dbg(SDIO, "\n"); @@ -1108,6 +1037,64 @@ void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev) } +static int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev) +{ + sdiodev->bus_if->state = BRCMF_BUS_DOWN; + + if (sdiodev->bus) { + brcmf_sdbrcm_disconnect(sdiodev->bus); + sdiodev->bus = NULL; + } + + brcmf_sdioh_detach(sdiodev); + + sdiodev->sbwad = 0; + + return 0; +} + +static int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) +{ + u32 regs = 0; + int ret = 0; + + ret = brcmf_sdioh_attach(sdiodev); + if (ret) + goto out; + + regs = SI_ENUM_BASE; + + /* try to attach to the target device */ + sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev); + if (!sdiodev->bus) { + brcmf_err("device attach failed\n"); + ret = -ENODEV; + goto out; + } + +out: + if (ret) + brcmf_sdio_remove(sdiodev); + + return ret; +} + +/* devices we support, null terminated */ +static const struct sdio_device_id brcmf_sdmmc_ids[] = { + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, + SDIO_DEVICE_ID_BROADCOM_4335_4339)}, + { /* end: all zeroes */ }, +}; +MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); + +static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; + + static int brcmf_ops_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) { @@ -1201,6 +1188,14 @@ static void brcmf_ops_sdio_remove(struct sdio_func *func) } #ifdef CONFIG_PM_SLEEP +static void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable) +{ + if (enable) + brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); + else + brcmf_sdbrcm_wd_timer(sdiodev->bus, 0); +} + static int brcmf_sdio_suspend(struct device *dev) { mmc_pm_flag_t sdio_flags; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index fc0d4f0129db..c1dfa9778992 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -236,43 +236,16 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn, * nbytes: number of bytes to transfer to/from buf * Returns 0 or error code. */ -int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr, - u8 *buf, uint nbytes); int brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, u8 *data, uint size); /* Issue an abort to the specified function */ int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn); -/* platform specific/high level functions */ -int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); -int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev); - -/* attach, return handler on success, NULL if failed. - * The handler shall be provided by all subsequent calls. No local cache - * cfghdl points to the starting address of pci device mapped memory - */ -int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev); -void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev); - -/* read or write one byte using cmd52 */ -int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw, uint fnc, - uint addr, u8 *byte); - -/* read or write 2/4 bytes using cmd53 */ -int brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev, uint rw, uint fnc, - uint addr, u32 *word, uint nbyte); - -/* Watchdog timer interface for pm ops */ -void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable); - void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev); void brcmf_sdbrcm_disconnect(void *ptr); void brcmf_sdbrcm_isr(void *arg); void brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick); -void brcmf_pm_resume_wait(struct brcmf_sdio_dev *sdiodev, - wait_queue_head_t *wq); -bool brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev); #endif /* _BRCM_SDH_H_ */ |