5 files changed, 102 insertions, 87 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 34c993dd0602..fa35b23bbaa7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -287,6 +287,9 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	s32 retry = 0;
 	int ret;
 
+	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
+		return -ENOMEDIUM;
+
 	/*
 	 * figure out how to read the register based on address range
 	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
@@ -306,9 +309,12 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 			usleep_range(1000, 2000);
 		ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz,
 					       data, write);
-	} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
+	} while (ret != 0 && ret != -ENOMEDIUM &&
+		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
-	if (ret != 0)
+	if (ret == -ENOMEDIUM)
+		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
+	else if (ret != 0)
 		brcmf_err("failed with %d\n", ret);
 
 	return ret;
@@ -320,6 +326,9 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 	int err = 0, i;
 	u8 addr[3];
 
+	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
+		return -ENOMEDIUM;
+
 	addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
 	addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK;
 	addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
@@ -429,6 +438,7 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 			     bool write, u32 addr, struct sk_buff *pkt)
 {
 	unsigned int req_sz;
+	int err;
 
 	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
 	if (brcmf_sdiod_pm_resume_error(sdiodev))
@@ -439,18 +449,18 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	req_sz &= (uint)~3;
 
 	if (write)
-		return sdio_memcpy_toio(sdiodev->func[fn], addr,
-					((u8 *)(pkt->data)),
-					req_sz);
+		err = sdio_memcpy_toio(sdiodev->func[fn], addr,
+				       ((u8 *)(pkt->data)), req_sz);
 	else if (fn == 1)
-		return sdio_memcpy_fromio(sdiodev->func[fn],
-					  ((u8 *)(pkt->data)),
-					  addr, req_sz);
+		err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)),
+					 addr, req_sz);
 	else
 		/* function 2 read is FIFO operation */
-		return sdio_readsb(sdiodev->func[fn],
-				   ((u8 *)(pkt->data)), addr,
-				   req_sz);
+		err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr,
+				  req_sz);
+	if (err == -ENOMEDIUM)
+		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
+	return err;
 }
 
 /**
@@ -593,7 +603,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);
 
 		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
-		if (ret != 0) {
+		if (ret == -ENOMEDIUM) {
+			brcmf_bus_change_state(sdiodev->bus_if,
+					       BRCMF_BUS_NOMEDIUM);
+			break;
+		} else if (ret != 0) {
 			brcmf_err("CMD53 sg block %s failed %d\n",
 				  write ? "write" : "read", ret);
 			ret = -EIO;
@@ -852,8 +866,6 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
 
 static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 {
-	sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-
 	if (sdiodev->bus) {
 		brcmf_sdio_remove(sdiodev->bus);
 		sdiodev->bus = NULL;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index 5c12a07673fa..c4535616064e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@ -17,8 +17,12 @@
 #ifndef _BRCMF_BUS_H_
 #define _BRCMF_BUS_H_
 
+#include "dhd_dbg.h"
+
 /* The level of bus communication with the dongle */
 enum brcmf_bus_state {
+	BRCMF_BUS_UNKNOWN,	/* Not determined yet */
+	BRCMF_BUS_NOMEDIUM,	/* No medium access to dongle */
 	BRCMF_BUS_DOWN,		/* Not ready for frame transfers */
 	BRCMF_BUS_LOAD,		/* Download access only (CPU reset) */
 	BRCMF_BUS_DATA		/* Ready for frame transfers */
@@ -144,6 +148,23 @@ struct pktq *brcmf_bus_gettxq(struct brcmf_bus *bus)
 
 	return bus->ops->gettxq(bus->dev);
 }
+
+static inline bool brcmf_bus_ready(struct brcmf_bus *bus)
+{
+	return bus->state == BRCMF_BUS_LOAD || bus->state == BRCMF_BUS_DATA;
+}
+
+static inline void brcmf_bus_change_state(struct brcmf_bus *bus,
+					  enum brcmf_bus_state new_state)
+{
+	/* NOMEDIUM is permanent */
+	if (bus->state == BRCMF_BUS_NOMEDIUM)
+		return;
+
+	brcmf_dbg(TRACE, "%d -> %d\n", bus->state, new_state);
+	bus->state = new_state;
+}
+
 /*
  * interface functions from common layer
  */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index af39edae8c62..d4d966beb840 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -934,7 +934,7 @@ int brcmf_bus_start(struct device *dev)
 		p2p_ifp = NULL;
 
 	/* signal bus ready */
-	bus_if->state = BRCMF_BUS_DATA;
+	brcmf_bus_change_state(bus_if, BRCMF_BUS_DATA);
 
 	/* Bus is ready, do any initialization */
 	ret = brcmf_c_preinit_dcmds(ifp);
@@ -1029,6 +1029,8 @@ void brcmf_detach(struct device *dev)
 	/* stop firmware event handling */
 	brcmf_fweh_detach(drvr);
 
+	brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
+
 	/* make sure primary interface removed last */
 	for (i = BRCMF_MAX_IFS-1; i > -1; i--)
 		if (drvr->iflist[i]) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index ef24a1bd24a7..3e991897d7ca 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -1082,10 +1082,6 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
 	/* Clear partial in any case */
 	bus->cur_read.len = 0;
-
-	/* If we can't reach the device, signal failure */
-	if (err)
-		bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 }
 
 /* return total length of buffer chain */
@@ -1682,8 +1678,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 	bus->rxpending = true;
 
 	for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
-	     !bus->rxskip && rxleft &&
-	     bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN;
+	     !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if);
 	     rd->seq_num++, rxleft--) {
 
 		/* Handle glomming separately */
@@ -2232,39 +2227,37 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		bus->watchdog_tsk = NULL;
 	}
 
-	sdio_claim_host(bus->sdiodev->func[1]);
-
-	/* Enable clock for device interrupts */
-	brcmf_sdio_bus_sleep(bus, false, false);
+	if (bus_if->state == BRCMF_BUS_DOWN) {
+		sdio_claim_host(sdiodev->func[1]);
+
+		/* Enable clock for device interrupts */
+		brcmf_sdio_bus_sleep(bus, false, false);
+
+		/* Disable and clear interrupts at the chip level also */
+		w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
+		local_hostintmask = bus->hostintmask;
+		bus->hostintmask = 0;
+
+		/* Force backplane clocks to assure F2 interrupt propagates */
+		saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					    &err);
+		if (!err)
+			brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+					  (saveclk | SBSDIO_FORCE_HT), &err);
+		if (err)
+			brcmf_err("Failed to force clock for F2: err %d\n",
+				  err);
 
-	/* Disable and clear interrupts at the chip level also */
-	w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
-	local_hostintmask = bus->hostintmask;
-	bus->hostintmask = 0;
+		/* Turn off the bus (F2), free any pending packets */
+		brcmf_dbg(INTR, "disable SDIO interrupts\n");
+		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
 
-	/* Change our idea of bus state */
-	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
+		/* Clear any pending interrupts now that F2 is disabled */
+		w_sdreg32(bus, local_hostintmask,
+			  offsetof(struct sdpcmd_regs, intstatus));
 
-	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdiod_regrb(bus->sdiodev,
-				    SBSDIO_FUNC1_CHIPCLKCSR, &err);
-	if (!err) {
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  (saveclk | SBSDIO_FORCE_HT), &err);
+		sdio_release_host(sdiodev->func[1]);
 	}
-	if (err)
-		brcmf_err("Failed to force clock for F2: err %d\n", err);
-
-	/* Turn off the bus (F2), free any pending packets */
-	brcmf_dbg(INTR, "disable SDIO interrupts\n");
-	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
-
-	/* Clear any pending interrupts now that F2 is disabled */
-	w_sdreg32(bus, local_hostintmask,
-		  offsetof(struct sdpcmd_regs, intstatus));
-
-	sdio_release_host(bus->sdiodev->func[1]);
-
 	/* Clear the data packet queues */
 	brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
 
@@ -2354,20 +2347,11 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		/* Check for inconsistent device control */
 		devctl = brcmf_sdiod_regrb(bus->sdiodev,
 					   SBSDIO_DEVICE_CTL, &err);
-		if (err) {
-			brcmf_err("error reading DEVCTL: %d\n", err);
-			bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-		}
 #endif				/* DEBUG */
 
 		/* Read CSR, if clock on switch to AVAIL, else ignore */
 		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
 					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
-		if (err) {
-			brcmf_err("error reading CSR: %d\n",
-				  err);
-			bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-		}
 
 		brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
 			  devctl, clkctl);
@@ -2375,19 +2359,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		if (SBSDIO_HTAV(clkctl)) {
 			devctl = brcmf_sdiod_regrb(bus->sdiodev,
 						   SBSDIO_DEVICE_CTL, &err);
-			if (err) {
-				brcmf_err("error reading DEVCTL: %d\n",
-					  err);
-				bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-			}
 			devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 			brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 					  devctl, &err);
-			if (err) {
-				brcmf_err("error writing DEVCTL: %d\n",
-					  err);
-				bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-			}
 			bus->clkstate = CLK_AVAIL;
 		}
 	}
@@ -2522,9 +2496,8 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		txlimit -= framecnt;
 	}
 
-	if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) {
+	if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) {
 		brcmf_err("failed backplane access over SDIO, halting operation\n");
-		bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 		atomic_set(&bus->intstatus, 0);
 	} else if (atomic_read(&bus->intstatus) ||
 		   atomic_read(&bus->ipend) > 0 ||
@@ -3356,7 +3329,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
 	}
 
 	/* Allow HT Clock now that the ARM is running. */
-	bus->sdiodev->bus_if->state = BRCMF_BUS_LOAD;
+	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD);
 	bcmerror = 0;
 
 err:
@@ -3633,7 +3606,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 		return;
 	}
 
-	if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
+	if (!brcmf_bus_ready(bus->sdiodev->bus_if)) {
 		brcmf_err("bus is down. we have nothing to do\n");
 		return;
 	}
@@ -3644,7 +3617,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 	else
 		if (brcmf_sdio_intr_rstatus(bus)) {
 			brcmf_err("failed backplane access\n");
-			bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 		}
 
 	/* Disable additional interrupts (is this needed now)? */
@@ -3781,6 +3753,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		goto fail;
 	}
 
+	/* SDIO register access works so moving
+	 * state from UNKNOWN to DOWN.
+	 */
+	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
+
 	if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) {
 		brcmf_err("brcmf_sdio_chip_attach failed!\n");
 		goto fail;
@@ -4004,7 +3981,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	/* Disable F2 to clear any intermediate frame state on the dongle */
 	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
-	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 	bus->rxflow = false;
 
 	/* Done with backplane-dependent accesses, can drop clock... */
@@ -4060,16 +4036,20 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 		}
 
 		if (bus->ci) {
-			sdio_claim_host(bus->sdiodev->func[1]);
-			brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
-			/* Leave the device in state where it is 'quiet'. This
-			 * is done by putting it in download_state which
-			 * essentially resets all necessary cores
-			 */
-			msleep(20);
-			brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci);
-			brcmf_sdio_clkctl(bus, CLK_NONE, false);
-			sdio_release_host(bus->sdiodev->func[1]);
+			if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
+				sdio_claim_host(bus->sdiodev->func[1]);
+				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+				/* Leave the device in state where it is
+				 * 'quiet'. This is done by putting it in
+				 * download_state which essentially resets
+				 * all necessary cores.
+				 */
+				msleep(20);
+				brcmf_sdio_chip_enter_download(bus->sdiodev,
+							       bus->ci);
+				brcmf_sdio_clkctl(bus, CLK_NONE, false);
+				sdio_release_host(bus->sdiodev->func[1]);
+			}
 			brcmf_sdio_chip_detach(&bus->ci);
 		}
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index c345c32eb631..24f65cd53859 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -522,10 +522,10 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 	/* update state of upper layer */
 	if (state == BRCMFMAC_USB_STATE_DOWN) {
 		brcmf_dbg(USB, "DBUS is down\n");
-		bcmf_bus->state = BRCMF_BUS_DOWN;
+		brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN);
 	} else if (state == BRCMFMAC_USB_STATE_UP) {
 		brcmf_dbg(USB, "DBUS is up\n");
-		bcmf_bus->state = BRCMF_BUS_DATA;
+		brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DATA);
 	} else {
 		brcmf_dbg(USB, "DBUS current state=%d\n", state);
 	}