2 files changed, 14 insertions, 48 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e5f25c5b9c32..134bef66a31f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -53,6 +53,9 @@
 
 #define SDIO_FUNC1_BLOCKSIZE		64
 #define SDIO_FUNC2_BLOCKSIZE		512
+/* Maximum milliseconds to wait for F2 to come up */
+#define SDIO_WAIT_F2RDY	3000
+
 
 static irqreturn_t brcmf_sdio_oob_irqhandler(int irq, void *dev_id)
 {
@@ -205,27 +208,8 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
 	 * Handle F2 enable/disable and Abort command
 	 * as a special case.
 	 */
-	if (regaddr == SDIO_CCCR_IOEx) {
-		sdfunc = sdiodev->func[2];
-		if (sdfunc) {
-			if (*byte & SDIO_FUNC_ENABLE_2) {
-				/* Enable Function 2 */
-				err_ret = sdio_enable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("enable F2 failed:%d\n",
-						  err_ret);
-			} else {
-				/* Disable Function 2 */
-				err_ret = sdio_disable_func(sdfunc);
-				if (err_ret)
-					brcmf_err("Disable F2 failed:%d\n",
-						  err_ret);
-			}
-		} else {
-			err_ret = -ENOENT;
-		}
-	} else if ((regaddr == SDIO_CCCR_ABORT) ||
-		   (regaddr == SDIO_CCCR_IENx)) {
+	if ((regaddr == SDIO_CCCR_ABORT) ||
+	    (regaddr == SDIO_CCCR_IENx)) {
 		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
 				 GFP_KERNEL);
 		if (!sdfunc)
@@ -945,6 +929,9 @@ static int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev)
 		goto out;
 	}
 
+	/* increase F2 timeout */
+	sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY;
+
 	/* Enable Function 1 */
 	err_ret = sdio_enable_func(sdiodev->func[1]);
 	if (err_ret) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 0f95f3e79c10..c3f3d8d0eab0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -260,9 +260,6 @@ struct rte_console {
 #define MAX_HDR_READ	(1 << 6)
 #define MAX_RX_DATASZ	2048
 
-/* Maximum milliseconds to wait for F2 to come up */
-#define BRCMF_WAIT_F2RDY	3000
-
 /* Bump up limit on waiting for HT to account for first startup;
  * if the image is doing a CRC calculation before programming the PMU
  * for HT availability, it could take a couple hundred ms more, so
@@ -2265,8 +2262,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 
 	/* Turn off the bus (F2), free any pending packets */
 	brcmf_dbg(INTR, "disable SDIO interrupts\n");
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1,
-			 NULL);
+	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
 	/* Clear any pending interrupts now that F2 is disabled */
 	w_sdreg32(bus, local_hostintmask,
@@ -3570,8 +3566,6 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	unsigned long timeout;
-	u8 ready, enable;
 	int err, ret = 0;
 	u8 saveclk;
 
@@ -3612,26 +3606,13 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	/* Enable function 2 (frame transfers) */
 	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
 		  offsetof(struct sdpcmd_regs, tosbmailboxdata));
-	enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
-
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
+	err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
-	timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
-	ready = 0;
-	while (enable != ready) {
-		ready = brcmf_sdio_regrb(bus->sdiodev,
-					 SDIO_CCCR_IORx, NULL);
-		if (time_after(jiffies, timeout))
-			break;
-		else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
-			/* prevent busy waiting if it takes too long */
-			msleep_interruptible(20);
-	}
 
-	brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready);
+	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
 
 	/* If F2 successfully enabled, set core and enable interrupts */
-	if (ready == enable) {
+	if (!err) {
 		/* Set up the interrupt mask and enable interrupts */
 		bus->hostintmask = HOSTINTMASK;
 		w_sdreg32(bus, bus->hostintmask,
@@ -3640,8 +3621,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 		brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
 	} else {
 		/* Disable F2 again */
-		enable = SDIO_FUNC_ENABLE_1;
-		brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
+		sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 		ret = -ENODEV;
 	}
 
@@ -3942,8 +3922,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* Disable F2 to clear any intermediate frame state on the dongle */
-	brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx,
-			 SDIO_FUNC_ENABLE_1, NULL);
+	sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
 
 	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 	bus->rxflow = false;