diff options
Diffstat (limited to 'drivers/pci/hotplug/shpchp_hpc.c')
-rw-r--r-- | drivers/pci/hotplug/shpchp_hpc.c | 518 |
1 files changed, 189 insertions, 329 deletions
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index b4226ff3a854..66123cf4deaa 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -82,31 +82,6 @@ #define SLOT_100MHZ_PCIX_533 0x0f000000 #define SLOT_133MHZ_PCIX_533 0xf0000000 - -/* Secondary Bus Configuration Register */ -/* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */ -#define PCI_33MHZ 0x0 -#define PCI_66MHZ 0x1 -#define PCIX_66MHZ 0x2 -#define PCIX_100MHZ 0x3 -#define PCIX_133MHZ 0x4 - -/* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */ -#define PCI_33MHZ 0x0 -#define PCI_66MHZ 0x1 -#define PCIX_66MHZ 0x2 -#define PCIX_100MHZ 0x3 -#define PCIX_133MHZ 0x4 -#define PCIX_66MHZ_ECC 0x5 -#define PCIX_100MHZ_ECC 0x6 -#define PCIX_133MHZ_ECC 0x7 -#define PCIX_66MHZ_266 0x9 -#define PCIX_100MHZ_266 0xa -#define PCIX_133MHZ_266 0xb -#define PCIX_66MHZ_533 0x11 -#define PCIX_100MHZ_533 0x12 -#define PCIX_133MHZ_533 0x13 - /* Slot Configuration */ #define SLOT_NUM 0x0000001F #define FIRST_DEV_NUM 0x00001F00 @@ -231,6 +206,7 @@ static spinlock_t list_lock; static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs); static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds); +static int hpc_check_cmd_status(struct controller *ctrl); /* This is the interrupt polling timeout function. */ static void int_poll_timeout(unsigned long lphp_ctlr) @@ -303,10 +279,13 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) int i; DBG_ENTER_ROUTINE - + + mutex_lock(&slot->ctrl->cmd_lock); + if (!php_ctlr) { err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; + retval = -EINVAL; + goto out; } for (i = 0; i < 10; i++) { @@ -323,7 +302,8 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) if (cmd_status & 0x1) { /* After 1 sec and and the controller is still busy */ err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__); - return -1; + retval = -EBUSY; + goto out; } ++t_slot; @@ -340,6 +320,17 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) * Wait for command completion. */ retval = shpc_wait_cmd(slot->ctrl); + if (retval) + goto out; + + cmd_status = hpc_check_cmd_status(slot->ctrl); + if (cmd_status) { + err("%s: Failed to issued command 0x%x (error code = %d)\n", + __FUNCTION__, cmd, cmd_status); + retval = -EIO; + } + out: + mutex_unlock(&slot->ctrl->cmd_lock); DBG_LEAVE_ROUTINE return retval; @@ -532,81 +523,41 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; - u32 slot_reg; - u16 slot_status, sec_bus_status; - u8 m66_cap, pcix_cap, pi; int retval = 0; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; + u32 slot_reg = readl(php_ctlr->creg + SLOT1 + 4 * slot->hp_slot); + u8 pcix_cap = (slot_reg >> 12) & 7; + u8 m66_cap = (slot_reg >> 9) & 1; DBG_ENTER_ROUTINE - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - if (slot->hp_slot >= php_ctlr->num_slots) { - err("%s: Invalid HPC slot number!\n", __FUNCTION__); - return -1; - } - - pi = readb(php_ctlr->creg + PROG_INTERFACE); - slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot)); - dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg); - slot_status = (u16) slot_reg; - dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status); - sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); - - pcix_cap = (u8) ((slot_status & 0x3000) >> 12); - dbg("%s: pcix_cap = %x\n", __FUNCTION__, pcix_cap); - m66_cap = (u8) ((slot_status & 0x0200) >> 9); - dbg("%s: m66_cap = %x\n", __FUNCTION__, m66_cap); - + dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", + __FUNCTION__, slot_reg, pcix_cap, m66_cap); - if (pi == 2) { - switch (pcix_cap) { - case 0: - *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; - break; - case 1: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 3: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 4: - *value = PCI_SPEED_133MHz_PCIX_266; - break; - case 5: - *value = PCI_SPEED_133MHz_PCIX_533; - break; - case 2: /* Reserved */ - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } - } else { - switch (pcix_cap) { - case 0: - *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; - break; - case 1: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 3: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 2: /* Reserved */ - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } + switch (pcix_cap) { + case 0x0: + *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; + break; + case 0x1: + *value = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + *value = PCI_SPEED_133MHz_PCIX; + break; + case 0x4: + *value = PCI_SPEED_133MHz_PCIX_266; + break; + case 0x5: + *value = PCI_SPEED_133MHz_PCIX_533; + break; + case 0x2: + default: + *value = PCI_SPEED_UNKNOWN; + retval = -ENODEV; + break; } dbg("Adapter speed = %d\n", *value); - DBG_LEAVE_ROUTINE return retval; } @@ -797,6 +748,7 @@ static void hpc_release_ctlr(struct controller *ctrl) { struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; struct php_ctlr_state_s *p, *p_prev; + int i; DBG_ENTER_ROUTINE @@ -805,6 +757,14 @@ static void hpc_release_ctlr(struct controller *ctrl) return ; } + /* + * Mask all slot event interrupts + */ + for (i = 0; i < ctrl->num_slots; i++) + writel(0xffff3fff, php_ctlr->creg + SLOT1 + (4 * i)); + + cleanup_slots(ctrl); + if (shpchp_poll_mode) { del_timer(&php_ctlr->int_poll_timer); } else { @@ -814,6 +774,7 @@ static void hpc_release_ctlr(struct controller *ctrl) pci_disable_msi(php_ctlr->pci_dev); } } + if (php_ctlr->pci_dev) { iounmap(php_ctlr->creg); release_mem_region(ctrl->mmio_base, ctrl->mmio_size); @@ -939,98 +900,66 @@ static int hpc_slot_disable(struct slot * slot) static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { - u8 slot_cmd; - u8 pi; - int retval = 0; + int retval; struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; + u8 pi, cmd; DBG_ENTER_ROUTINE - - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } pi = readb(php_ctlr->creg + PROG_INTERFACE); - - if (pi == 1) { - switch (value) { - case 0: - slot_cmd = SETA_PCI_33MHZ; - break; - case 1: - slot_cmd = SETA_PCI_66MHZ; - break; - case 2: - slot_cmd = SETA_PCIX_66MHZ; - break; - case 3: - slot_cmd = SETA_PCIX_100MHZ; - break; - case 4: - slot_cmd = SETA_PCIX_133MHZ; - break; - default: - slot_cmd = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - return retval; - } - } else { - switch (value) { - case 0: - slot_cmd = SETB_PCI_33MHZ; - break; - case 1: - slot_cmd = SETB_PCI_66MHZ; - break; - case 2: - slot_cmd = SETB_PCIX_66MHZ_PM; - break; - case 3: - slot_cmd = SETB_PCIX_100MHZ_PM; - break; - case 4: - slot_cmd = SETB_PCIX_133MHZ_PM; - break; - case 5: - slot_cmd = SETB_PCIX_66MHZ_EM; - break; - case 6: - slot_cmd = SETB_PCIX_100MHZ_EM; - break; - case 7: - slot_cmd = SETB_PCIX_133MHZ_EM; - break; - case 8: - slot_cmd = SETB_PCIX_66MHZ_266; - break; - case 0x9: - slot_cmd = SETB_PCIX_100MHZ_266; - break; - case 0xa: - slot_cmd = SETB_PCIX_133MHZ_266; - break; - case 0xb: - slot_cmd = SETB_PCIX_66MHZ_533; - break; - case 0xc: - slot_cmd = SETB_PCIX_100MHZ_533; - break; - case 0xd: - slot_cmd = SETB_PCIX_133MHZ_533; - break; - default: - slot_cmd = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - return retval; - } + if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX)) + return -EINVAL; + switch (value) { + case PCI_SPEED_33MHz: + cmd = SETA_PCI_33MHZ; + break; + case PCI_SPEED_66MHz: + cmd = SETA_PCI_66MHZ; + break; + case PCI_SPEED_66MHz_PCIX: + cmd = SETA_PCIX_66MHZ; + break; + case PCI_SPEED_100MHz_PCIX: + cmd = SETA_PCIX_100MHZ; + break; + case PCI_SPEED_133MHz_PCIX: + cmd = SETA_PCIX_133MHZ; + break; + case PCI_SPEED_66MHz_PCIX_ECC: + cmd = SETB_PCIX_66MHZ_EM; + break; + case PCI_SPEED_100MHz_PCIX_ECC: + cmd = SETB_PCIX_100MHZ_EM; + break; + case PCI_SPEED_133MHz_PCIX_ECC: + cmd = SETB_PCIX_133MHZ_EM; + break; + case PCI_SPEED_66MHz_PCIX_266: + cmd = SETB_PCIX_66MHZ_266; + break; + case PCI_SPEED_100MHz_PCIX_266: + cmd = SETB_PCIX_100MHZ_266; + break; + case PCI_SPEED_133MHz_PCIX_266: + cmd = SETB_PCIX_133MHZ_266; + break; + case PCI_SPEED_66MHz_PCIX_533: + cmd = SETB_PCIX_66MHZ_533; + break; + case PCI_SPEED_100MHz_PCIX_533: + cmd = SETB_PCIX_100MHZ_533; + break; + case PCI_SPEED_133MHz_PCIX_533: + cmd = SETB_PCIX_133MHZ_533; + break; + default: + return -EINVAL; } - retval = shpc_write_cmd(slot, 0, slot_cmd); - if (retval) { + + retval = shpc_write_cmd(slot, 0, cmd); + if (retval) err("%s: Write command failed!\n", __FUNCTION__); - return -1; - } DBG_LEAVE_ROUTINE return retval; @@ -1093,14 +1022,8 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) wake_up_interruptible(&ctrl->queue); } - if ((intr_loc = (intr_loc >> 1)) == 0) { - /* Unmask Global Interrupt Mask */ - temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - temp_dword &= 0xfffffffe; - writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); - - return IRQ_NONE; - } + if ((intr_loc = (intr_loc >> 1)) == 0) + goto out; for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { /* To find out which slot has interrupt pending */ @@ -1130,6 +1053,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2); } } + out: if (!shpchp_poll_mode) { /* Unmask Global Interrupt Mask */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); @@ -1142,64 +1066,43 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) { + int retval = 0; struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - int retval = 0; - u8 pi; - u32 slot_avail1, slot_avail2; + u8 pi = readb(php_ctlr->creg + PROG_INTERFACE); + u32 slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1); + u32 slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2); DBG_ENTER_ROUTINE - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - if (slot->hp_slot >= php_ctlr->num_slots) { - err("%s: Invalid HPC slot number!\n", __FUNCTION__); - return -1; - } - - pi = readb(php_ctlr->creg + PROG_INTERFACE); - slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1); - slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2); - if (pi == 2) { if (slot_avail2 & SLOT_133MHZ_PCIX_533) - bus_speed = PCIX_133MHZ_533; + bus_speed = PCI_SPEED_133MHz_PCIX_533; else if (slot_avail2 & SLOT_100MHZ_PCIX_533) - bus_speed = PCIX_100MHZ_533; + bus_speed = PCI_SPEED_100MHz_PCIX_533; else if (slot_avail2 & SLOT_66MHZ_PCIX_533) - bus_speed = PCIX_66MHZ_533; + bus_speed = PCI_SPEED_66MHz_PCIX_533; else if (slot_avail2 & SLOT_133MHZ_PCIX_266) - bus_speed = PCIX_133MHZ_266; + bus_speed = PCI_SPEED_133MHz_PCIX_266; else if (slot_avail2 & SLOT_100MHZ_PCIX_266) - bus_speed = PCIX_100MHZ_266; + bus_speed = PCI_SPEED_100MHz_PCIX_266; else if (slot_avail2 & SLOT_66MHZ_PCIX_266) - bus_speed = PCIX_66MHZ_266; - else if (slot_avail1 & SLOT_133MHZ_PCIX) - bus_speed = PCIX_133MHZ; - else if (slot_avail1 & SLOT_100MHZ_PCIX) - bus_speed = PCIX_100MHZ; - else if (slot_avail1 & SLOT_66MHZ_PCIX) - bus_speed = PCIX_66MHZ; - else if (slot_avail2 & SLOT_66MHZ) - bus_speed = PCI_66MHZ; - else if (slot_avail1 & SLOT_33MHZ) - bus_speed = PCI_33MHZ; - else bus_speed = PCI_SPEED_UNKNOWN; - } else { + bus_speed = PCI_SPEED_66MHz_PCIX_266; + } + + if (bus_speed == PCI_SPEED_UNKNOWN) { if (slot_avail1 & SLOT_133MHZ_PCIX) - bus_speed = PCIX_133MHZ; + bus_speed = PCI_SPEED_133MHz_PCIX; else if (slot_avail1 & SLOT_100MHZ_PCIX) - bus_speed = PCIX_100MHZ; + bus_speed = PCI_SPEED_100MHz_PCIX; else if (slot_avail1 & SLOT_66MHZ_PCIX) - bus_speed = PCIX_66MHZ; + bus_speed = PCI_SPEED_66MHz_PCIX; else if (slot_avail2 & SLOT_66MHZ) - bus_speed = PCI_66MHZ; + bus_speed = PCI_SPEED_66MHz; else if (slot_avail1 & SLOT_33MHZ) - bus_speed = PCI_33MHZ; - else bus_speed = PCI_SPEED_UNKNOWN; + bus_speed = PCI_SPEED_33MHz; + else + retval = -ENODEV; } *value = bus_speed; @@ -1210,111 +1113,69 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) { + int retval = 0; struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - u16 sec_bus_status; - int retval = 0; - u8 pi; + u16 sec_bus_reg = readw(php_ctlr->creg + SEC_BUS_CONFIG); + u8 pi = readb(php_ctlr->creg + PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); DBG_ENTER_ROUTINE - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - if (slot->hp_slot >= php_ctlr->num_slots) { - err("%s: Invalid HPC slot number!\n", __FUNCTION__); - return -1; + if ((pi == 1) && (speed_mode > 4)) { + *value = PCI_SPEED_UNKNOWN; + return -ENODEV; } - pi = readb(php_ctlr->creg + PROG_INTERFACE); - sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG); - - if (pi == 2) { - switch (sec_bus_status & 0x000f) { - case 0: - bus_speed = PCI_SPEED_33MHz; - break; - case 1: - bus_speed = PCI_SPEED_66MHz; - break; - case 2: - bus_speed = PCI_SPEED_66MHz_PCIX; - break; - case 3: - bus_speed = PCI_SPEED_100MHz_PCIX; - break; - case 4: - bus_speed = PCI_SPEED_133MHz_PCIX; - break; - case 5: - bus_speed = PCI_SPEED_66MHz_PCIX_ECC; - break; - case 6: - bus_speed = PCI_SPEED_100MHz_PCIX_ECC; - break; - case 7: - bus_speed = PCI_SPEED_133MHz_PCIX_ECC; - break; - case 8: - bus_speed = PCI_SPEED_66MHz_PCIX_266; - break; - case 9: - bus_speed = PCI_SPEED_100MHz_PCIX_266; - break; - case 0xa: - bus_speed = PCI_SPEED_133MHz_PCIX_266; - break; - case 0xb: - bus_speed = PCI_SPEED_66MHz_PCIX_533; - break; - case 0xc: - bus_speed = PCI_SPEED_100MHz_PCIX_533; - break; - case 0xd: - bus_speed = PCI_SPEED_133MHz_PCIX_533; - break; - case 0xe: - case 0xf: - default: - bus_speed = PCI_SPEED_UNKNOWN; - break; - } - } else { - /* In the case where pi is undefined, default it to 1 */ - switch (sec_bus_status & 0x0007) { - case 0: - bus_speed = PCI_SPEED_33MHz; - break; - case 1: - bus_speed = PCI_SPEED_66MHz; - break; - case 2: - bus_speed = PCI_SPEED_66MHz_PCIX; - break; - case 3: - bus_speed = PCI_SPEED_100MHz_PCIX; - break; - case 4: - bus_speed = PCI_SPEED_133MHz_PCIX; - break; - case 5: - bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ - break; - case 6: - bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ - break; - case 7: - bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */ - break; - default: - bus_speed = PCI_SPEED_UNKNOWN; - break; - } + switch (speed_mode) { + case 0x0: + *value = PCI_SPEED_33MHz; + break; + case 0x1: + *value = PCI_SPEED_66MHz; + break; + case 0x2: + *value = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + *value = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + *value = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + *value = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + *value = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + *value = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + *value = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + *value = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + *value = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + *value = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + *value = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + *value = PCI_SPEED_133MHz_PCIX_533; + break; + default: + *value = PCI_SPEED_UNKNOWN; + retval = -ENODEV; + break; } - *value = bus_speed; dbg("Current bus speed = %d\n", bus_speed); DBG_LEAVE_ROUTINE return retval; @@ -1343,7 +1204,6 @@ static struct hpc_ops shpchp_hpc_ops = { .green_led_blink = hpc_set_green_led_blink, .release_ctlr = hpc_release_ctlr, - .check_cmd_status = hpc_check_cmd_status, }; inline static int shpc_indirect_creg_read(struct controller *ctrl, int index, @@ -1375,15 +1235,13 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ spin_lock_init(&list_lock); - php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL); + php_ctlr = kzalloc(sizeof(*php_ctlr), GFP_KERNEL); if (!php_ctlr) { /* allocate controller state data */ err("%s: HPC controller memory allocation error!\n", __FUNCTION__); goto abort; } - memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s)); - php_ctlr->pci_dev = pdev; /* save pci_dev in context */ if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == @@ -1454,7 +1312,9 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) } dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg); - init_MUTEX(&ctrl->crit_sect); + mutex_init(&ctrl->crit_sect); + mutex_init(&ctrl->cmd_lock); + /* Setup wait queue */ init_waitqueue_head(&ctrl->queue); |