diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 503 |
1 files changed, 363 insertions, 140 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index aa1684d99b70..29ff9619b5fa 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -23,7 +23,6 @@ #include <linux/string.h> #include <linux/log2.h> #include <linux/logic_pio.h> -#include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> #include <linux/interrupt.h> #include <linux/device.h> @@ -115,6 +114,9 @@ static bool pcie_ari_disabled; /* If set, the PCIe ATS capability will not be used. */ static bool pcie_ats_disabled; +/* If set, the PCI config space of each device is printed during boot. */ +bool pci_early_dump; + bool pci_ats_disabled(void) { return pcie_ats_disabled; @@ -191,6 +193,168 @@ void __iomem *pci_ioremap_wc_bar(struct pci_dev *pdev, int bar) EXPORT_SYMBOL_GPL(pci_ioremap_wc_bar); #endif +/** + * pci_dev_str_match_path - test if a path string matches a device + * @dev: the PCI device to test + * @p: string to match the device against + * @endptr: pointer to the string after the match + * + * Test if a string (typically from a kernel parameter) formatted as a + * path of device/function addresses matches a PCI device. The string must + * be of the form: + * + * [<domain>:]<bus>:<device>.<func>[/<device>.<func>]* + * + * A path for a device can be obtained using 'lspci -t'. Using a path + * is more robust against bus renumbering than using only a single bus, + * device and function address. + * + * Returns 1 if the string matches the device, 0 if it does not and + * a negative error code if it fails to parse the string. + */ +static int pci_dev_str_match_path(struct pci_dev *dev, const char *path, + const char **endptr) +{ + int ret; + int seg, bus, slot, func; + char *wpath, *p; + char end; + + *endptr = strchrnul(path, ';'); + + wpath = kmemdup_nul(path, *endptr - path, GFP_KERNEL); + if (!wpath) + return -ENOMEM; + + while (1) { + p = strrchr(wpath, '/'); + if (!p) + break; + ret = sscanf(p, "/%x.%x%c", &slot, &func, &end); + if (ret != 2) { + ret = -EINVAL; + goto free_and_exit; + } + + if (dev->devfn != PCI_DEVFN(slot, func)) { + ret = 0; + goto free_and_exit; + } + + /* + * Note: we don't need to get a reference to the upstream + * bridge because we hold a reference to the top level + * device which should hold a reference to the bridge, + * and so on. + */ + dev = pci_upstream_bridge(dev); + if (!dev) { + ret = 0; + goto free_and_exit; + } + + *p = 0; + } + + ret = sscanf(wpath, "%x:%x:%x.%x%c", &seg, &bus, &slot, + &func, &end); + if (ret != 4) { + seg = 0; + ret = sscanf(wpath, "%x:%x.%x%c", &bus, &slot, &func, &end); + if (ret != 3) { + ret = -EINVAL; + goto free_and_exit; + } + } + + ret = (seg == pci_domain_nr(dev->bus) && + bus == dev->bus->number && + dev->devfn == PCI_DEVFN(slot, func)); + +free_and_exit: + kfree(wpath); + return ret; +} + +/** + * pci_dev_str_match - test if a string matches a device + * @dev: the PCI device to test + * @p: string to match the device against + * @endptr: pointer to the string after the match + * + * Test if a string (typically from a kernel parameter) matches a specified + * PCI device. The string may be of one of the following formats: + * + * [<domain>:]<bus>:<device>.<func>[/<device>.<func>]* + * pci:<vendor>:<device>[:<subvendor>:<subdevice>] + * + * The first format specifies a PCI bus/device/function address which + * may change if new hardware is inserted, if motherboard firmware changes, + * or due to changes caused in kernel parameters. If the domain is + * left unspecified, it is taken to be 0. In order to be robust against + * bus renumbering issues, a path of PCI device/function numbers may be used + * to address the specific device. The path for a device can be determined + * through the use of 'lspci -t'. + * + * The second format matches devices using IDs in the configuration + * space which may match multiple devices in the system. A value of 0 + * for any field will match all devices. (Note: this differs from + * in-kernel code that uses PCI_ANY_ID which is ~0; this is for + * legacy reasons and convenience so users don't have to specify + * FFFFFFFFs on the command line.) + * + * Returns 1 if the string matches the device, 0 if it does not and + * a negative error code if the string cannot be parsed. + */ +static int pci_dev_str_match(struct pci_dev *dev, const char *p, + const char **endptr) +{ + int ret; + int count; + unsigned short vendor, device, subsystem_vendor, subsystem_device; + + if (strncmp(p, "pci:", 4) == 0) { + /* PCI vendor/device (subvendor/subdevice) IDs are specified */ + p += 4; + ret = sscanf(p, "%hx:%hx:%hx:%hx%n", &vendor, &device, + &subsystem_vendor, &subsystem_device, &count); + if (ret != 4) { + ret = sscanf(p, "%hx:%hx%n", &vendor, &device, &count); + if (ret != 2) + return -EINVAL; + + subsystem_vendor = 0; + subsystem_device = 0; + } + + p += count; + + if ((!vendor || vendor == dev->vendor) && + (!device || device == dev->device) && + (!subsystem_vendor || + subsystem_vendor == dev->subsystem_vendor) && + (!subsystem_device || + subsystem_device == dev->subsystem_device)) + goto found; + } else { + /* + * PCI Bus, Device, Function IDs are specified + * (optionally, may include a path of devfns following it) + */ + ret = pci_dev_str_match_path(dev, p, &p); + if (ret < 0) + return ret; + else if (ret) + goto found; + } + + *endptr = p; + return 0; + +found: + *endptr = p; + return 1; +} static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn, u8 pos, int cap, int *ttl) @@ -1171,6 +1335,33 @@ static void pci_restore_config_space(struct pci_dev *pdev) } } +static void pci_restore_rebar_state(struct pci_dev *pdev) +{ + unsigned int pos, nbars, i; + u32 ctrl; + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR); + if (!pos) + return; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); + nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >> + PCI_REBAR_CTRL_NBAR_SHIFT; + + for (i = 0; i < nbars; i++, pos += 8) { + struct resource *res; + int bar_idx, size; + + pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); + bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX; + res = pdev->resource + bar_idx; + size = order_base_2((resource_size(res) >> 20) | 1) - 1; + ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE; + ctrl |= size << PCI_REBAR_CTRL_BAR_SHIFT; + pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl); + } +} + /** * pci_restore_state - Restore the saved state of a PCI device * @dev: - PCI device that we're dealing with @@ -1186,6 +1377,7 @@ void pci_restore_state(struct pci_dev *dev) pci_restore_pri_state(dev); pci_restore_ats_state(dev); pci_restore_vc_state(dev); + pci_restore_rebar_state(dev); pci_cleanup_aer_error_status_regs(dev); @@ -2045,6 +2237,7 @@ static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup) case PCI_D2: if (pci_no_d1d2(dev)) break; + /* else: fall through */ default: target_state = state; } @@ -2290,7 +2483,7 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev) * @bridge: Bridge to check * * This function checks if it is possible to move the bridge to D3. - * Currently we only allow D3 for recent enough PCIe ports. + * Currently we only allow D3 for recent enough PCIe ports and Thunderbolt. */ bool pci_bridge_d3_possible(struct pci_dev *bridge) { @@ -2305,18 +2498,27 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) return false; /* - * Hotplug interrupts cannot be delivered if the link is down, - * so parents of a hotplug port must stay awake. In addition, - * hotplug ports handled by firmware in System Management Mode + * Hotplug ports handled by firmware in System Management Mode * may not be put into D3 by the OS (Thunderbolt on non-Macs). - * For simplicity, disallow in general for now. */ - if (bridge->is_hotplug_bridge) + if (bridge->is_hotplug_bridge && !pciehp_is_native(bridge)) return false; if (pci_bridge_d3_force) return true; + /* Even the oldest 2010 Thunderbolt controller supports D3. */ + if (bridge->is_thunderbolt) + return true; + + /* + * Hotplug ports handled natively by the OS were not validated + * by vendors for runtime D3 at least until 2018 because there + * was no OS support. + */ + if (bridge->is_hotplug_bridge) + return false; + /* * It should be safe to put PCIe ports from 2015 or newer * to D3. @@ -2820,6 +3022,66 @@ void pci_request_acs(void) pci_acs_enable = 1; } +static const char *disable_acs_redir_param; + +/** + * pci_disable_acs_redir - disable ACS redirect capabilities + * @dev: the PCI device + * + * For only devices specified in the disable_acs_redir parameter. + */ +static void pci_disable_acs_redir(struct pci_dev *dev) +{ + int ret = 0; + const char *p; + int pos; + u16 ctrl; + + if (!disable_acs_redir_param) + return; + + p = disable_acs_redir_param; + while (*p) { + ret = pci_dev_str_match(dev, p, &p); + if (ret < 0) { + pr_info_once("PCI: Can't parse disable_acs_redir parameter: %s\n", + disable_acs_redir_param); + + break; + } else if (ret == 1) { + /* Found a match */ + break; + } + + if (*p != ';' && *p != ',') { + /* End of param or invalid format */ + break; + } + p++; + } + + if (ret != 1) + return; + + if (!pci_dev_specific_disable_acs_redir(dev)) + return; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); + if (!pos) { + pci_warn(dev, "cannot disable ACS redirect for this hardware as it does not have ACS capabilities\n"); + return; + } + + pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl); + + /* P2P Request & Completion Redirect */ + ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC); + + pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl); + + pci_info(dev, "disabled ACS redirect\n"); +} + /** * pci_std_enable_acs - enable ACS on devices using standard ACS capabilites * @dev: the PCI device @@ -2859,12 +3121,22 @@ static void pci_std_enable_acs(struct pci_dev *dev) void pci_enable_acs(struct pci_dev *dev) { if (!pci_acs_enable) - return; + goto disable_acs_redir; if (!pci_dev_specific_enable_acs(dev)) - return; + goto disable_acs_redir; pci_std_enable_acs(dev); + +disable_acs_redir: + /* + * Note: pci_disable_acs_redir() must be called even if ACS was not + * enabled by the kernel because it may have been enabled by + * platform firmware. So if we are told to disable it, we should + * always disable it after setting the kernel's default + * preferences. + */ + pci_disable_acs_redir(dev); } static bool pci_acs_flags_enabled(struct pci_dev *pdev, u16 acs_flags) @@ -3070,7 +3342,7 @@ int pci_rebar_get_current_size(struct pci_dev *pdev, int bar) return pos; pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); - return (ctrl & PCI_REBAR_CTRL_BAR_SIZE) >> 8; + return (ctrl & PCI_REBAR_CTRL_BAR_SIZE) >> PCI_REBAR_CTRL_BAR_SHIFT; } /** @@ -3093,7 +3365,7 @@ int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size) pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE; - ctrl |= size << 8; + ctrl |= size << PCI_REBAR_CTRL_BAR_SHIFT; pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl); return 0; } @@ -4077,7 +4349,7 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout) * Returns true if the device advertises support for PCIe function level * resets. */ -static bool pcie_has_flr(struct pci_dev *dev) +bool pcie_has_flr(struct pci_dev *dev) { u32 cap; @@ -4087,6 +4359,7 @@ static bool pcie_has_flr(struct pci_dev *dev) pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap); return cap & PCI_EXP_DEVCAP_FLR; } +EXPORT_SYMBOL_GPL(pcie_has_flr); /** * pcie_flr - initiate a PCIe function level reset @@ -4262,19 +4535,18 @@ void __weak pcibios_reset_secondary_bus(struct pci_dev *dev) } /** - * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge. + * pci_bridge_secondary_bus_reset - Reset the secondary bus on a PCI bridge. * @dev: Bridge device * * Use the bridge control register to assert reset on the secondary bus. * Devices on the secondary bus are left in power-on state. */ -int pci_reset_bridge_secondary_bus(struct pci_dev *dev) +int pci_bridge_secondary_bus_reset(struct pci_dev *dev) { pcibios_reset_secondary_bus(dev); return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS); } -EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus); static int pci_parent_bus_reset(struct pci_dev *dev, int probe) { @@ -4291,9 +4563,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) if (probe) return 0; - pci_reset_bridge_secondary_bus(dev->bus->self); - - return 0; + return pci_bridge_secondary_bus_reset(dev->bus->self); } static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe) @@ -4825,7 +5095,7 @@ int pci_probe_reset_slot(struct pci_slot *slot) EXPORT_SYMBOL_GPL(pci_probe_reset_slot); /** - * pci_reset_slot - reset a PCI slot + * __pci_reset_slot - Try to reset a PCI slot * @slot: PCI slot to reset * * A PCI bus may host multiple slots, each slot may support a reset mechanism @@ -4837,33 +5107,9 @@ EXPORT_SYMBOL_GPL(pci_probe_reset_slot); * through this function. PCI config space of all devices in the slot and * behind the slot is saved before and restored after reset. * - * Return 0 on success, non-zero on error. - */ -int pci_reset_slot(struct pci_slot *slot) -{ - int rc; - - rc = pci_slot_reset(slot, 1); - if (rc) - return rc; - - pci_slot_save_and_disable(slot); - - rc = pci_slot_reset(slot, 0); - - pci_slot_restore(slot); - - return rc; -} -EXPORT_SYMBOL_GPL(pci_reset_slot); - -/** - * pci_try_reset_slot - Try to reset a PCI slot - * @slot: PCI slot to reset - * * Same as above except return -EAGAIN if the slot cannot be locked */ -int pci_try_reset_slot(struct pci_slot *slot) +static int __pci_reset_slot(struct pci_slot *slot) { int rc; @@ -4884,10 +5130,11 @@ int pci_try_reset_slot(struct pci_slot *slot) return rc; } -EXPORT_SYMBOL_GPL(pci_try_reset_slot); static int pci_bus_reset(struct pci_bus *bus, int probe) { + int ret; + if (!bus->self || !pci_bus_resetable(bus)) return -ENOTTY; @@ -4898,11 +5145,11 @@ static int pci_bus_reset(struct pci_bus *bus, int probe) might_sleep(); - pci_reset_bridge_secondary_bus(bus->self); + ret = pci_bridge_secondary_bus_reset(bus->self); pci_bus_unlock(bus); - return 0; + return ret; } /** @@ -4918,15 +5165,12 @@ int pci_probe_reset_bus(struct pci_bus *bus) EXPORT_SYMBOL_GPL(pci_probe_reset_bus); /** - * pci_reset_bus - reset a PCI bus + * __pci_reset_bus - Try to reset a PCI bus * @bus: top level PCI bus to reset * - * Do a bus reset on the given bus and any subordinate buses, saving - * and restoring state of all devices. - * - * Return 0 on success, non-zero on error. + * Same as above except return -EAGAIN if the bus cannot be locked */ -int pci_reset_bus(struct pci_bus *bus) +static int __pci_reset_bus(struct pci_bus *bus) { int rc; @@ -4936,42 +5180,30 @@ int pci_reset_bus(struct pci_bus *bus) pci_bus_save_and_disable(bus); - rc = pci_bus_reset(bus, 0); + if (pci_bus_trylock(bus)) { + might_sleep(); + rc = pci_bridge_secondary_bus_reset(bus->self); + pci_bus_unlock(bus); + } else + rc = -EAGAIN; pci_bus_restore(bus); return rc; } -EXPORT_SYMBOL_GPL(pci_reset_bus); /** - * pci_try_reset_bus - Try to reset a PCI bus - * @bus: top level PCI bus to reset + * pci_reset_bus - Try to reset a PCI bus + * @pdev: top level PCI device to reset via slot/bus * * Same as above except return -EAGAIN if the bus cannot be locked */ -int pci_try_reset_bus(struct pci_bus *bus) +int pci_reset_bus(struct pci_dev *pdev) { - int rc; - - rc = pci_bus_reset(bus, 1); - if (rc) - return rc; - - pci_bus_save_and_disable(bus); - - if (pci_bus_trylock(bus)) { - might_sleep(); - pci_reset_bridge_secondary_bus(bus->self); - pci_bus_unlock(bus); - } else - rc = -EAGAIN; - - pci_bus_restore(bus); - - return rc; + return pci_probe_reset_slot(pdev->slot) ? + __pci_reset_slot(pdev->slot) : __pci_reset_bus(pdev->bus); } -EXPORT_SYMBOL_GPL(pci_try_reset_bus); +EXPORT_SYMBOL_GPL(pci_reset_bus); /** * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count @@ -5304,14 +5536,16 @@ u32 pcie_bandwidth_capable(struct pci_dev *dev, enum pci_bus_speed *speed, } /** - * pcie_print_link_status - Report the PCI device's link speed and width + * __pcie_print_link_status - Report the PCI device's link speed and width * @dev: PCI device to query + * @verbose: Print info even when enough bandwidth is available * - * Report the available bandwidth at the device. If this is less than the - * device is capable of, report the device's maximum possible bandwidth and - * the upstream link that limits its performance to less than that. + * If the available bandwidth at the device is less than the device is + * capable of, report the device's maximum possible bandwidth and the + * upstream link that limits its performance. If @verbose, always print + * the available bandwidth, even if the device isn't constrained. */ -void pcie_print_link_status(struct pci_dev *dev) +void __pcie_print_link_status(struct pci_dev *dev, bool verbose) { enum pcie_link_width width, width_cap; enum pci_bus_speed speed, speed_cap; @@ -5321,11 +5555,11 @@ void pcie_print_link_status(struct pci_dev *dev) bw_cap = pcie_bandwidth_capable(dev, &speed_cap, &width_cap); bw_avail = pcie_bandwidth_available(dev, &limiting_dev, &speed, &width); - if (bw_avail >= bw_cap) + if (bw_avail >= bw_cap && verbose) pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth (%s x%d link)\n", bw_cap / 1000, bw_cap % 1000, PCIE_SPEED2STR(speed_cap), width_cap); - else + else if (bw_avail < bw_cap) pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link)\n", bw_avail / 1000, bw_avail % 1000, PCIE_SPEED2STR(speed), width, @@ -5333,6 +5567,17 @@ void pcie_print_link_status(struct pci_dev *dev) bw_cap / 1000, bw_cap % 1000, PCIE_SPEED2STR(speed_cap), width_cap); } + +/** + * pcie_print_link_status - Report the PCI device's link speed and width + * @dev: PCI device to query + * + * Report the available bandwidth at the device. + */ +void pcie_print_link_status(struct pci_dev *dev) +{ + __pcie_print_link_status(dev, true); +} EXPORT_SYMBOL(pcie_print_link_status); /** @@ -5427,8 +5672,19 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, * @dev: the PCI device for which alias is added * @devfn: alias slot and function * - * This helper encodes 8-bit devfn as bit number in dma_alias_mask. - * It should be called early, preferably as PCI fixup header quirk. + * This helper encodes an 8-bit devfn as a bit number in dma_alias_mask + * which is used to program permissible bus-devfn source addresses for DMA + * requests in an IOMMU. These aliases factor into IOMMU group creation + * and are useful for devices generating DMA requests beyond or different + * from their logical bus-devfn. Examples include device quirks where the + * device simply uses the wrong devfn, as well as non-transparent bridges + * where the alias may be a proxy for devices in another domain. + * + * IOMMU group creation is performed during device discovery or addition, + * prior to any potential DMA mapping and therefore prior to driver probing + * (especially for userspace assigned devices where IOMMU group definition + * cannot be left as a userspace activity). DMA aliases should therefore + * be configured via quirks, such as the PCI fixup header quirk. */ void pci_add_dma_alias(struct pci_dev *dev, u8 devfn) { @@ -5494,10 +5750,10 @@ static DEFINE_SPINLOCK(resource_alignment_lock); static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev, bool *resize) { - int seg, bus, slot, func, align_order, count; - unsigned short vendor, device, subsystem_vendor, subsystem_device; + int align_order, count; resource_size_t align = pcibios_default_alignment(); - char *p; + const char *p; + int ret; spin_lock(&resource_alignment_lock); p = resource_alignment_param; @@ -5517,58 +5773,21 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev, } else { align_order = -1; } - if (strncmp(p, "pci:", 4) == 0) { - /* PCI vendor/device (subvendor/subdevice) ids are specified */ - p += 4; - if (sscanf(p, "%hx:%hx:%hx:%hx%n", - &vendor, &device, &subsystem_vendor, &subsystem_device, &count) != 4) { - if (sscanf(p, "%hx:%hx%n", &vendor, &device, &count) != 2) { - printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: pci:%s\n", - p); - break; - } - subsystem_vendor = subsystem_device = 0; - } - p += count; - if ((!vendor || (vendor == dev->vendor)) && - (!device || (device == dev->device)) && - (!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) && - (!subsystem_device || (subsystem_device == dev->subsystem_device))) { - *resize = true; - if (align_order == -1) - align = PAGE_SIZE; - else - align = 1 << align_order; - /* Found */ - break; - } - } - else { - if (sscanf(p, "%x:%x:%x.%x%n", - &seg, &bus, &slot, &func, &count) != 4) { - seg = 0; - if (sscanf(p, "%x:%x.%x%n", - &bus, &slot, &func, &count) != 3) { - /* Invalid format */ - printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n", - p); - break; - } - } - p += count; - if (seg == pci_domain_nr(dev->bus) && - bus == dev->bus->number && - slot == PCI_SLOT(dev->devfn) && - func == PCI_FUNC(dev->devfn)) { - *resize = true; - if (align_order == -1) - align = PAGE_SIZE; - else - align = 1 << align_order; - /* Found */ - break; - } + + ret = pci_dev_str_match(dev, p, &p); + if (ret == 1) { + *resize = true; + if (align_order == -1) + align = PAGE_SIZE; + else + align = 1 << align_order; + break; + } else if (ret < 0) { + pr_err("PCI: Can't parse resource_alignment parameter: %s\n", + p); + break; } + if (*p != ';' && *p != ',') { /* End of param or invalid format */ break; @@ -5845,6 +6064,8 @@ static int __init pci_setup(char *str) pcie_ats_disabled = true; } else if (!strcmp(str, "noaer")) { pci_no_aer(); + } else if (!strcmp(str, "earlydump")) { + pci_early_dump = true; } else if (!strncmp(str, "realloc=", 8)) { pci_realloc_get_opt(str + 8); } else if (!strncmp(str, "realloc", 7)) { @@ -5881,6 +6102,8 @@ static int __init pci_setup(char *str) pcie_bus_config = PCIE_BUS_PEER2PEER; } else if (!strncmp(str, "pcie_scan_all", 13)) { pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); + } else if (!strncmp(str, "disable_acs_redir=", 18)) { + disable_acs_redir_param = str + 18; } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str); |