diff options
Diffstat (limited to 'drivers/power')
21 files changed, 798 insertions, 13 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 980951dff834..a564237278ff 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -246,5 +246,15 @@ config POWER_RESET_SC27XX PMICs includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips. +config NVMEM_REBOOT_MODE + tristate "Generic NVMEM reboot mode driver" + depends on OF + select REBOOT_MODE + help + Say y here will enable reboot mode driver. This will + get reboot mode arguments and store it in a NVMEM cell, + then the bootloader can read it and take different + action according to the mode. + endif diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 0aebee954ac1..85da3198e4e0 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -29,3 +29,4 @@ obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o +obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o diff --git a/drivers/power/reset/nvmem-reboot-mode.c b/drivers/power/reset/nvmem-reboot-mode.c new file mode 100644 index 000000000000..e229308d43e2 --- /dev/null +++ b/drivers/power/reset/nvmem-reboot-mode.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) Vaisala Oyj. All rights reserved. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/nvmem-consumer.h> +#include <linux/platform_device.h> +#include <linux/reboot-mode.h> + +struct nvmem_reboot_mode { + struct reboot_mode_driver reboot; + struct nvmem_cell *cell; +}; + +static int nvmem_reboot_mode_write(struct reboot_mode_driver *reboot, + unsigned int magic) +{ + int ret; + struct nvmem_reboot_mode *nvmem_rbm; + + nvmem_rbm = container_of(reboot, struct nvmem_reboot_mode, reboot); + + ret = nvmem_cell_write(nvmem_rbm->cell, &magic, sizeof(magic)); + if (ret < 0) + dev_err(reboot->dev, "update reboot mode bits failed\n"); + + return ret; +} + +static int nvmem_reboot_mode_probe(struct platform_device *pdev) +{ + int ret; + struct nvmem_reboot_mode *nvmem_rbm; + + nvmem_rbm = devm_kzalloc(&pdev->dev, sizeof(*nvmem_rbm), GFP_KERNEL); + if (!nvmem_rbm) + return -ENOMEM; + + nvmem_rbm->reboot.dev = &pdev->dev; + nvmem_rbm->reboot.write = nvmem_reboot_mode_write; + + nvmem_rbm->cell = devm_nvmem_cell_get(&pdev->dev, "reboot-mode"); + if (IS_ERR(nvmem_rbm->cell)) { + dev_err(&pdev->dev, "failed to get the nvmem cell reboot-mode\n"); + return PTR_ERR(nvmem_rbm->cell); + } + + ret = devm_reboot_mode_register(&pdev->dev, &nvmem_rbm->reboot); + if (ret) + dev_err(&pdev->dev, "can't register reboot mode\n"); + + return ret; +} + +static const struct of_device_id nvmem_reboot_mode_of_match[] = { + { .compatible = "nvmem-reboot-mode" }, + {} +}; +MODULE_DEVICE_TABLE(of, nvmem_reboot_mode_of_match); + +static struct platform_driver nvmem_reboot_mode_driver = { + .probe = nvmem_reboot_mode_probe, + .driver = { + .name = "nvmem-reboot-mode", + .of_match_table = nvmem_reboot_mode_of_match, + }, +}; +module_platform_driver(nvmem_reboot_mode_driver); + +MODULE_AUTHOR("Nandor Han <nandor.han@vaisala.com>"); +MODULE_DESCRIPTION("NVMEM reboot mode driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c index 3fa1642d4c54..22a743a0bf28 100644 --- a/drivers/power/reset/qcom-pon.c +++ b/drivers/power/reset/qcom-pon.c @@ -14,11 +14,15 @@ #define PON_SOFT_RB_SPARE 0x8f +#define GEN1_REASON_SHIFT 2 +#define GEN2_REASON_SHIFT 1 + struct pm8916_pon { struct device *dev; struct regmap *regmap; u32 baseaddr; struct reboot_mode_driver reboot_mode; + long reason_shift; }; static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot, @@ -30,7 +34,7 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot, ret = regmap_update_bits(pon->regmap, pon->baseaddr + PON_SOFT_RB_SPARE, - 0xfc, magic << 2); + 0xfc, magic << pon->reason_shift); if (ret < 0) dev_err(pon->dev, "update reboot mode bits failed\n"); @@ -60,6 +64,7 @@ static int pm8916_pon_probe(struct platform_device *pdev) return error; pon->reboot_mode.dev = &pdev->dev; + pon->reason_shift = (long)of_device_get_match_data(&pdev->dev); pon->reboot_mode.write = pm8916_reboot_mode_write; error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode); if (error) { @@ -73,8 +78,9 @@ static int pm8916_pon_probe(struct platform_device *pdev) } static const struct of_device_id pm8916_pon_id_table[] = { - { .compatible = "qcom,pm8916-pon" }, - { .compatible = "qcom,pms405-pon" }, + { .compatible = "qcom,pm8916-pon", .data = (void *)GEN1_REASON_SHIFT }, + { .compatible = "qcom,pms405-pon", .data = (void *)GEN1_REASON_SHIFT }, + { .compatible = "qcom,pm8998-pon", .data = (void *)GEN2_REASON_SHIFT }, { } }; MODULE_DEVICE_TABLE(of, pm8916_pon_id_table); diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index a873a0038cc8..5d91b5160b41 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -15,6 +15,20 @@ config POWER_SUPPLY_DEBUG Say Y here to enable debugging messages for power supply class and drivers. +config POWER_SUPPLY_HWMON + bool + prompt "Expose power supply sensors as hwmon device" + depends on HWMON=y || HWMON=POWER_SUPPLY + default y + help + This options enables API that allows sensors found on a + power supply device (current, voltage, temperature) to be + exposed as a hwmon device. + + Say 'Y' here if you want power supplies to + have hwmon sysfs interface too. + + config PDA_POWER tristate "Generic PDA/phone power driver" depends on !S390 @@ -698,4 +712,13 @@ config CHARGER_BD70528 information and altering charger configurations from charger block of the ROHM BD70528 Power Management IC. +config CHARGER_WILCO + tristate "Wilco EC based charger for ChromeOS" + depends on WILCO_EC + help + Say Y here to enable control of the charging routines performed + by the Embedded Controller on the Chromebook named Wilco. Further + information can be found in + Documentation/ABI/testing/sysfs-class-power-wilco + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 346a8ef5f348..96c2b74b36bf 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -6,6 +6,7 @@ power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o obj-$(CONFIG_POWER_SUPPLY) += power_supply.o +obj-$(CONFIG_POWER_SUPPLY_HWMON) += power_supply_hwmon.o obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o obj-$(CONFIG_PDA_POWER) += pda_power.o @@ -91,3 +92,4 @@ obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o obj-$(CONFIG_CHARGER_BD70528) += bd70528-charger.o +obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index a3dd1cfcfa8b..453d6332d43a 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -1697,7 +1697,7 @@ static int bq24190_get_config(struct bq24190_dev_info *bdi) static int bq24190_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; struct power_supply_config charger_cfg = {}, battery_cfg = {}; struct bq24190_dev_info *bdi; diff --git a/drivers/power/supply/bq24257_charger.c b/drivers/power/supply/bq24257_charger.c index 7eb58f10e092..eb151687beb3 100644 --- a/drivers/power/supply/bq24257_charger.c +++ b/drivers/power/supply/bq24257_charger.c @@ -950,7 +950,7 @@ static int bq24257_fw_probe(struct bq24257_device *bq) static int bq24257_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; const struct acpi_device_id *acpi_id; struct bq24257_device *bq; diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index b2ff82b4707a..d333f2b321b9 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -817,7 +817,7 @@ static int bq25890_fw_probe(struct bq25890_device *bq) static int bq25890_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; struct bq25890_device *bq; int ret; diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c index 7e9c3984ef6a..3a9ea94c3de3 100644 --- a/drivers/power/supply/cros_usbpd-charger.c +++ b/drivers/power/supply/cros_usbpd-charger.c @@ -53,6 +53,8 @@ struct charger_data { }; static enum power_supply_property cros_usbpd_charger_props[] = { + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, + POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT, POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CURRENT_MAX, @@ -80,6 +82,10 @@ static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = { POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID }; +/* Input voltage/current limit in mV/mA. Default to none. */ +static u16 input_voltage_limit = EC_POWER_LIMIT_NONE; +static u16 input_current_limit = EC_POWER_LIMIT_NONE; + static bool cros_usbpd_charger_port_is_dedicated(struct port_data *port) { return port->port_number >= port->charger->num_usbpd_ports; @@ -324,6 +330,26 @@ static int cros_usbpd_charger_get_port_status(struct port_data *port, return ret; } +static int cros_usbpd_charger_set_ext_power_limit(struct charger_data *charger, + u16 current_lim, + u16 voltage_lim) +{ + struct ec_params_external_power_limit_v1 req; + int ret; + + req.current_lim = current_lim; + req.voltage_lim = voltage_lim; + + ret = cros_usbpd_charger_ec_command(charger, 0, + EC_CMD_EXTERNAL_POWER_LIMIT, + &req, sizeof(req), NULL, 0); + if (ret < 0) + dev_err(charger->dev, + "Unable to set the 'External Power Limit': %d\n", ret); + + return ret; +} + static void cros_usbpd_charger_power_changed(struct power_supply *psy) { struct port_data *port = power_supply_get_drvdata(psy); @@ -396,6 +422,18 @@ static int cros_usbpd_charger_get_prop(struct power_supply *psy, case POWER_SUPPLY_PROP_USB_TYPE: val->intval = port->psy_usb_type; break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + if (input_current_limit == EC_POWER_LIMIT_NONE) + val->intval = -1; + else + val->intval = input_current_limit * 1000; + break; + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: + if (input_voltage_limit == EC_POWER_LIMIT_NONE) + val->intval = -1; + else + val->intval = input_voltage_limit * 1000; + break; case POWER_SUPPLY_PROP_MODEL_NAME: val->strval = port->model_name; break; @@ -409,6 +447,81 @@ static int cros_usbpd_charger_get_prop(struct power_supply *psy, return 0; } +static int cros_usbpd_charger_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct port_data *port = power_supply_get_drvdata(psy); + struct charger_data *charger = port->charger; + struct device *dev = charger->dev; + u16 intval; + int ret; + + /* U16_MAX in mV/mA is the maximum supported value */ + if (val->intval >= U16_MAX * 1000) + return -EINVAL; + /* A negative number is used to clear the limit */ + if (val->intval < 0) + intval = EC_POWER_LIMIT_NONE; + else /* Convert from uA/uV to mA/mV */ + intval = val->intval / 1000; + + switch (psp) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = cros_usbpd_charger_set_ext_power_limit(charger, intval, + input_voltage_limit); + if (ret < 0) + break; + + input_current_limit = intval; + if (input_current_limit == EC_POWER_LIMIT_NONE) + dev_info(dev, + "External Current Limit cleared for all ports\n"); + else + dev_info(dev, + "External Current Limit set to %dmA for all ports\n", + input_current_limit); + break; + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: + ret = cros_usbpd_charger_set_ext_power_limit(charger, + input_current_limit, + intval); + if (ret < 0) + break; + + input_voltage_limit = intval; + if (input_voltage_limit == EC_POWER_LIMIT_NONE) + dev_info(dev, + "External Voltage Limit cleared for all ports\n"); + else + dev_info(dev, + "External Voltage Limit set to %dmV for all ports\n", + input_voltage_limit); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int cros_usbpd_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: + ret = 1; + break; + default: + ret = 0; + } + + return ret; +} + static int cros_usbpd_charger_ec_event(struct notifier_block *nb, unsigned long queued_during_suspend, void *_notify) @@ -525,6 +638,9 @@ static int cros_usbpd_charger_probe(struct platform_device *pd) psy_desc = &port->psy_desc; psy_desc->get_property = cros_usbpd_charger_get_prop; + psy_desc->set_property = cros_usbpd_charger_set_prop; + psy_desc->property_is_writeable = + cros_usbpd_charger_property_is_writeable; psy_desc->external_power_changed = cros_usbpd_charger_power_changed; psy_cfg.drv_data = port; diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c index 68cfde4be632..3bbb8b4c8ae7 100644 --- a/drivers/power/supply/max14656_charger_detector.c +++ b/drivers/power/supply/max14656_charger_detector.c @@ -247,7 +247,7 @@ static void stop_irq_work(void *data) static int max14656_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; struct power_supply_config psy_cfg = {}; struct max14656_chip *chip; diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c index 91cafc7bed30..62499018e68b 100644 --- a/drivers/power/supply/max17040_battery.c +++ b/drivers/power/supply/max17040_battery.c @@ -193,7 +193,7 @@ static const struct power_supply_desc max17040_battery_desc = { static int max17040_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct power_supply_config psy_cfg = {}; struct max17040_chip *chip; diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 581c6bd23388..64f3358eaa3c 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -1005,7 +1005,7 @@ static void max17042_stop_work(void *data) static int max17042_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; const struct power_supply_desc *max17042_desc = &max17042_psy_desc; struct power_supply_config psy_cfg = {}; const struct acpi_device_id *acpi_id = NULL; diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index b55cdfe22a2e..82e84801264c 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -1071,6 +1071,10 @@ __power_supply_register(struct device *parent, if (rc) goto create_triggers_failed; + rc = power_supply_add_hwmon_sysfs(psy); + if (rc) + goto add_hwmon_sysfs_failed; + /* * Update use_cnt after any uevents (most notably from device_add()). * We are here still during driver's probe but @@ -1089,6 +1093,8 @@ __power_supply_register(struct device *parent, return psy; +add_hwmon_sysfs_failed: + power_supply_remove_triggers(psy); create_triggers_failed: psy_unregister_cooler(psy); register_cooler_failed: @@ -1241,6 +1247,7 @@ void power_supply_unregister(struct power_supply *psy) cancel_work_sync(&psy->changed_work); cancel_delayed_work_sync(&psy->deferred_register_work); sysfs_remove_link(&psy->dev.kobj, "powers"); + power_supply_remove_hwmon_sysfs(psy); power_supply_remove_triggers(psy); psy_unregister_cooler(psy); psy_unregister_thermal(psy); diff --git a/drivers/power/supply/power_supply_hwmon.c b/drivers/power/supply/power_supply_hwmon.c new file mode 100644 index 000000000000..51fe60440d12 --- /dev/null +++ b/drivers/power/supply/power_supply_hwmon.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * power_supply_hwmon.c - power supply hwmon support. + */ + +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/power_supply.h> +#include <linux/slab.h> + +struct power_supply_hwmon { + struct power_supply *psy; + unsigned long *props; +}; + +static int power_supply_hwmon_in_to_property(u32 attr) +{ + switch (attr) { + case hwmon_in_average: + return POWER_SUPPLY_PROP_VOLTAGE_AVG; + case hwmon_in_min: + return POWER_SUPPLY_PROP_VOLTAGE_MIN; + case hwmon_in_max: + return POWER_SUPPLY_PROP_VOLTAGE_MAX; + case hwmon_in_input: + return POWER_SUPPLY_PROP_VOLTAGE_NOW; + default: + return -EINVAL; + } +} + +static int power_supply_hwmon_curr_to_property(u32 attr) +{ + switch (attr) { + case hwmon_curr_average: + return POWER_SUPPLY_PROP_CURRENT_AVG; + case hwmon_curr_max: + return POWER_SUPPLY_PROP_CURRENT_MAX; + case hwmon_curr_input: + return POWER_SUPPLY_PROP_CURRENT_NOW; + default: + return -EINVAL; + } +} + +static int power_supply_hwmon_temp_to_property(u32 attr, int channel) +{ + if (channel) { + switch (attr) { + case hwmon_temp_input: + return POWER_SUPPLY_PROP_TEMP_AMBIENT; + case hwmon_temp_min_alarm: + return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN; + case hwmon_temp_max_alarm: + return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX; + default: + break; + } + } else { + switch (attr) { + case hwmon_temp_input: + return POWER_SUPPLY_PROP_TEMP; + case hwmon_temp_max: + return POWER_SUPPLY_PROP_TEMP_MAX; + case hwmon_temp_min: + return POWER_SUPPLY_PROP_TEMP_MIN; + case hwmon_temp_min_alarm: + return POWER_SUPPLY_PROP_TEMP_ALERT_MIN; + case hwmon_temp_max_alarm: + return POWER_SUPPLY_PROP_TEMP_ALERT_MAX; + default: + break; + } + } + + return -EINVAL; +} + +static int +power_supply_hwmon_to_property(enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_in: + return power_supply_hwmon_in_to_property(attr); + case hwmon_curr: + return power_supply_hwmon_curr_to_property(attr); + case hwmon_temp: + return power_supply_hwmon_temp_to_property(attr, channel); + default: + return -EINVAL; + } +} + +static bool power_supply_hwmon_is_a_label(enum hwmon_sensor_types type, + u32 attr) +{ + return type == hwmon_temp && attr == hwmon_temp_label; +} + +static bool power_supply_hwmon_is_writable(enum hwmon_sensor_types type, + u32 attr) +{ + switch (type) { + case hwmon_in: + return attr == hwmon_in_min || + attr == hwmon_in_max; + case hwmon_curr: + return attr == hwmon_curr_max; + case hwmon_temp: + return attr == hwmon_temp_max || + attr == hwmon_temp_min || + attr == hwmon_temp_min_alarm || + attr == hwmon_temp_max_alarm; + default: + return false; + } +} + +static umode_t power_supply_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct power_supply_hwmon *psyhw = data; + int prop; + + + if (power_supply_hwmon_is_a_label(type, attr)) + return 0444; + + prop = power_supply_hwmon_to_property(type, attr, channel); + if (prop < 0 || !test_bit(prop, psyhw->props)) + return 0; + + if (power_supply_property_is_writeable(psyhw->psy, prop) > 0 && + power_supply_hwmon_is_writable(type, attr)) + return 0644; + + return 0444; +} + +static int power_supply_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, + const char **str) +{ + *str = channel ? "temp" : "temp ambient"; + return 0; +} + +static int +power_supply_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct power_supply_hwmon *psyhw = dev_get_drvdata(dev); + struct power_supply *psy = psyhw->psy; + union power_supply_propval pspval; + int ret, prop; + + prop = power_supply_hwmon_to_property(type, attr, channel); + if (prop < 0) + return prop; + + ret = power_supply_get_property(psy, prop, &pspval); + if (ret) + return ret; + + switch (type) { + /* + * Both voltage and current is reported in units of + * microvolts/microamps, so we need to adjust it to + * milliamps(volts) + */ + case hwmon_curr: + case hwmon_in: + pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 1000); + break; + /* + * Temp needs to be converted from 1/10 C to milli-C + */ + case hwmon_temp: + if (check_mul_overflow(pspval.intval, 100, + &pspval.intval)) + return -EOVERFLOW; + break; + default: + return -EINVAL; + } + + *val = pspval.intval; + + return 0; +} + +static int +power_supply_hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct power_supply_hwmon *psyhw = dev_get_drvdata(dev); + struct power_supply *psy = psyhw->psy; + union power_supply_propval pspval; + int prop; + + prop = power_supply_hwmon_to_property(type, attr, channel); + if (prop < 0) + return prop; + + pspval.intval = val; + + switch (type) { + /* + * Both voltage and current is reported in units of + * microvolts/microamps, so we need to adjust it to + * milliamps(volts) + */ + case hwmon_curr: + case hwmon_in: + if (check_mul_overflow(pspval.intval, 1000, + &pspval.intval)) + return -EOVERFLOW; + break; + /* + * Temp needs to be converted from 1/10 C to milli-C + */ + case hwmon_temp: + pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 100); + break; + default: + return -EINVAL; + } + + return power_supply_set_property(psy, prop, &pspval); +} + +static const struct hwmon_ops power_supply_hwmon_ops = { + .is_visible = power_supply_hwmon_is_visible, + .read = power_supply_hwmon_read, + .write = power_supply_hwmon_write, + .read_string = power_supply_hwmon_read_string, +}; + +static const struct hwmon_channel_info *power_supply_hwmon_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_LABEL | + HWMON_T_INPUT | + HWMON_T_MAX | + HWMON_T_MIN | + HWMON_T_MIN_ALARM | + HWMON_T_MIN_ALARM, + + HWMON_T_LABEL | + HWMON_T_INPUT | + HWMON_T_MIN_ALARM | + HWMON_T_LABEL | + HWMON_T_MAX_ALARM), + + HWMON_CHANNEL_INFO(curr, + HWMON_C_AVERAGE | + HWMON_C_MAX | + HWMON_C_INPUT), + + HWMON_CHANNEL_INFO(in, + HWMON_I_AVERAGE | + HWMON_I_MIN | + HWMON_I_MAX | + HWMON_I_INPUT), + NULL +}; + +static const struct hwmon_chip_info power_supply_hwmon_chip_info = { + .ops = &power_supply_hwmon_ops, + .info = power_supply_hwmon_info, +}; + +static void power_supply_hwmon_bitmap_free(void *data) +{ + bitmap_free(data); +} + +int power_supply_add_hwmon_sysfs(struct power_supply *psy) +{ + const struct power_supply_desc *desc = psy->desc; + struct power_supply_hwmon *psyhw; + struct device *dev = &psy->dev; + struct device *hwmon; + int ret, i; + + if (!devres_open_group(dev, power_supply_add_hwmon_sysfs, + GFP_KERNEL)) + return -ENOMEM; + + psyhw = devm_kzalloc(dev, sizeof(*psyhw), GFP_KERNEL); + if (!psyhw) { + ret = -ENOMEM; + goto error; + } + + psyhw->psy = psy; + psyhw->props = bitmap_zalloc(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG + 1, + GFP_KERNEL); + if (!psyhw->props) { + ret = -ENOMEM; + goto error; + } + + ret = devm_add_action(dev, power_supply_hwmon_bitmap_free, + psyhw->props); + if (ret) + goto error; + + for (i = 0; i < desc->num_properties; i++) { + const enum power_supply_property prop = desc->properties[i]; + + switch (prop) { + case POWER_SUPPLY_PROP_CURRENT_AVG: + case POWER_SUPPLY_PROP_CURRENT_MAX: + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_TEMP: + case POWER_SUPPLY_PROP_TEMP_MAX: + case POWER_SUPPLY_PROP_TEMP_MIN: + case POWER_SUPPLY_PROP_TEMP_ALERT_MIN: + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: + case POWER_SUPPLY_PROP_TEMP_AMBIENT: + case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN: + case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX: + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + set_bit(prop, psyhw->props); + break; + default: + break; + } + } + + hwmon = devm_hwmon_device_register_with_info(dev, psy->desc->name, + psyhw, + &power_supply_hwmon_chip_info, + NULL); + ret = PTR_ERR_OR_ZERO(hwmon); + if (ret) + goto error; + + devres_close_group(dev, power_supply_add_hwmon_sysfs); + return 0; +error: + devres_release_group(dev, NULL); + return ret; +} + +void power_supply_remove_hwmon_sysfs(struct power_supply *psy) +{ + devres_release_group(&psy->dev, power_supply_add_hwmon_sysfs); +} diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index 61430ae878d3..f37ad4eae60b 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -276,6 +276,8 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(charge_control_start_threshold), POWER_SUPPLY_ATTR(charge_control_end_threshold), POWER_SUPPLY_ATTR(input_current_limit), + POWER_SUPPLY_ATTR(input_voltage_limit), + POWER_SUPPLY_ATTR(input_power_limit), POWER_SUPPLY_ATTR(energy_full_design), POWER_SUPPLY_ATTR(energy_empty_design), POWER_SUPPLY_ATTR(energy_full), diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c index 9f0d70648e41..d8667a9fc49b 100644 --- a/drivers/power/supply/rt5033_battery.c +++ b/drivers/power/supply/rt5033_battery.c @@ -115,7 +115,7 @@ static const struct power_supply_desc rt5033_battery_desc = { static int rt5033_battery_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct power_supply_config psy_cfg = {}; struct rt5033_battery *battery; u32 ret; diff --git a/drivers/power/supply/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c index 40a9d329418a..29161ae90245 100644 --- a/drivers/power/supply/rt9455_charger.c +++ b/drivers/power/supply/rt9455_charger.c @@ -1584,7 +1584,7 @@ static const struct regmap_config rt9455_regmap_config = { static int rt9455_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; struct rt9455_info *info; struct power_supply_config rt9455_charger_config = {}; diff --git a/drivers/power/supply/sbs-manager.c b/drivers/power/supply/sbs-manager.c index 63173068a1ab..666243d9dd59 100644 --- a/drivers/power/supply/sbs-manager.c +++ b/drivers/power/supply/sbs-manager.c @@ -314,7 +314,7 @@ static const struct power_supply_desc sbsm_default_psy_desc = { static int sbsm_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct i2c_adapter *adapter = client->adapter; struct sbsm_data *data; struct device *dev = &client->dev; struct power_supply_desc *psy_desc; diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c index 1c89d030c045..1b80ae479e7d 100644 --- a/drivers/power/supply/ucs1002_power.c +++ b/drivers/power/supply/ucs1002_power.c @@ -336,7 +336,7 @@ static int ucs1002_get_usb_type(struct ucs1002_info *info, case F_ACTIVE_MODE_BC12_CDP: type = POWER_SUPPLY_USB_TYPE_CDP; break; - }; + } val->intval = type; diff --git a/drivers/power/supply/wilco-charger.c b/drivers/power/supply/wilco-charger.c new file mode 100644 index 000000000000..b3c6d7cdd731 --- /dev/null +++ b/drivers/power/supply/wilco-charger.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Charging control driver for the Wilco EC + * + * Copyright 2019 Google LLC + * + * See Documentation/ABI/testing/sysfs-class-power and + * Documentation/ABI/testing/sysfs-class-power-wilco for userspace interface + * and other info. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/platform_data/wilco-ec.h> +#include <linux/power_supply.h> + +#define DRV_NAME "wilco-charger" + +/* Property IDs and related EC constants */ +#define PID_CHARGE_MODE 0x0710 +#define PID_CHARGE_LOWER_LIMIT 0x0711 +#define PID_CHARGE_UPPER_LIMIT 0x0712 + +enum charge_mode { + CHARGE_MODE_STD = 1, /* Used for Standard */ + CHARGE_MODE_EXP = 2, /* Express Charge, used for Fast */ + CHARGE_MODE_AC = 3, /* Mostly AC use, used for Trickle */ + CHARGE_MODE_AUTO = 4, /* Used for Adaptive */ + CHARGE_MODE_CUSTOM = 5, /* Used for Custom */ +}; + +#define CHARGE_LOWER_LIMIT_MIN 50 +#define CHARGE_LOWER_LIMIT_MAX 95 +#define CHARGE_UPPER_LIMIT_MIN 55 +#define CHARGE_UPPER_LIMIT_MAX 100 + +/* Convert from POWER_SUPPLY_PROP_CHARGE_TYPE value to the EC's charge mode */ +static int psp_val_to_charge_mode(int psp_val) +{ + switch (psp_val) { + case POWER_SUPPLY_CHARGE_TYPE_TRICKLE: + return CHARGE_MODE_AC; + case POWER_SUPPLY_CHARGE_TYPE_FAST: + return CHARGE_MODE_EXP; + case POWER_SUPPLY_CHARGE_TYPE_STANDARD: + return CHARGE_MODE_STD; + case POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE: + return CHARGE_MODE_AUTO; + case POWER_SUPPLY_CHARGE_TYPE_CUSTOM: + return CHARGE_MODE_CUSTOM; + default: + return -EINVAL; + } +} + +/* Convert from EC's charge mode to POWER_SUPPLY_PROP_CHARGE_TYPE value */ +static int charge_mode_to_psp_val(enum charge_mode mode) +{ + switch (mode) { + case CHARGE_MODE_AC: + return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + case CHARGE_MODE_EXP: + return POWER_SUPPLY_CHARGE_TYPE_FAST; + case CHARGE_MODE_STD: + return POWER_SUPPLY_CHARGE_TYPE_STANDARD; + case CHARGE_MODE_AUTO: + return POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE; + case CHARGE_MODE_CUSTOM: + return POWER_SUPPLY_CHARGE_TYPE_CUSTOM; + default: + return -EINVAL; + } +} + +static enum power_supply_property wilco_charge_props[] = { + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD, + POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD, +}; + +static int wilco_charge_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wilco_ec_device *ec = power_supply_get_drvdata(psy); + u32 property_id; + int ret; + u8 raw; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + property_id = PID_CHARGE_MODE; + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD: + property_id = PID_CHARGE_LOWER_LIMIT; + break; + case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD: + property_id = PID_CHARGE_UPPER_LIMIT; + break; + default: + return -EINVAL; + } + + ret = wilco_ec_get_byte_property(ec, property_id, &raw); + if (ret < 0) + return ret; + if (property_id == PID_CHARGE_MODE) { + ret = charge_mode_to_psp_val(raw); + if (ret < 0) + return -EBADMSG; + raw = ret; + } + val->intval = raw; + + return 0; +} + +static int wilco_charge_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct wilco_ec_device *ec = power_supply_get_drvdata(psy); + int mode; + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + mode = psp_val_to_charge_mode(val->intval); + if (mode < 0) + return -EINVAL; + return wilco_ec_set_byte_property(ec, PID_CHARGE_MODE, mode); + case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD: + if (val->intval < CHARGE_LOWER_LIMIT_MIN || + val->intval > CHARGE_LOWER_LIMIT_MAX) + return -EINVAL; + return wilco_ec_set_byte_property(ec, PID_CHARGE_LOWER_LIMIT, + val->intval); + case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD: + if (val->intval < CHARGE_UPPER_LIMIT_MIN || + val->intval > CHARGE_UPPER_LIMIT_MAX) + return -EINVAL; + return wilco_ec_set_byte_property(ec, PID_CHARGE_UPPER_LIMIT, + val->intval); + default: + return -EINVAL; + } +} + +static int wilco_charge_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return 1; +} + +static const struct power_supply_desc wilco_ps_desc = { + .properties = wilco_charge_props, + .num_properties = ARRAY_SIZE(wilco_charge_props), + .get_property = wilco_charge_get_property, + .set_property = wilco_charge_set_property, + .property_is_writeable = wilco_charge_property_is_writeable, + .name = DRV_NAME, + .type = POWER_SUPPLY_TYPE_MAINS, +}; + +static int wilco_charge_probe(struct platform_device *pdev) +{ + struct wilco_ec_device *ec = dev_get_drvdata(pdev->dev.parent); + struct power_supply_config psy_cfg = {}; + struct power_supply *psy; + + psy_cfg.drv_data = ec; + psy = devm_power_supply_register(&pdev->dev, &wilco_ps_desc, &psy_cfg); + + return PTR_ERR_OR_ZERO(psy); +} + +static struct platform_driver wilco_charge_driver = { + .probe = wilco_charge_probe, + .driver = { + .name = DRV_NAME, + } +}; +module_platform_driver(wilco_charge_driver); + +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Wilco EC charge control driver"); |