diff options
Diffstat (limited to 'drivers/regulator/rk808-regulator.c')
| -rw-r--r-- | drivers/regulator/rk808-regulator.c | 381 |
1 files changed, 381 insertions, 0 deletions
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c new file mode 100644 index 000000000000..e305416d7697 --- /dev/null +++ b/drivers/regulator/rk808-regulator.c @@ -0,0 +1,381 @@ +/* + * Regulator driver for Rockchip RK808 + * + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * + * Author: Chris Zhong <zyw@rock-chips.com> + * Author: Zhang Qing <zhangqing@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/rk808.h> +#include <linux/of_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +/* Field Definitions */ +#define RK808_BUCK_VSEL_MASK 0x3f +#define RK808_BUCK4_VSEL_MASK 0xf +#define RK808_LDO_VSEL_MASK 0x1f + +/* Ramp rate definitions for buck1 / buck2 only */ +#define RK808_RAMP_RATE_OFFSET 3 +#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET) +#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET) +#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET) +#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET) +#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET) + +static const int rk808_buck_config_regs[] = { + RK808_BUCK1_CONFIG_REG, + RK808_BUCK2_CONFIG_REG, + RK808_BUCK3_CONFIG_REG, + RK808_BUCK4_CONFIG_REG, +}; + +static const struct regulator_linear_range rk808_buck_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 63, 12500), +}; + +static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000), +}; + +static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000), +}; + +static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000), + REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0), +}; + +static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000), +}; + +static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US; + unsigned int reg = rk808_buck_config_regs[rdev->desc->id - + RK808_ID_DCDC1]; + + switch (ramp_delay) { + case 1 ... 2000: + ramp_value = RK808_RAMP_RATE_2MV_PER_US; + break; + case 2001 ... 4000: + ramp_value = RK808_RAMP_RATE_4MV_PER_US; + break; + case 4001 ... 6000: + ramp_value = RK808_RAMP_RATE_6MV_PER_US; + break; + case 6001 ... 10000: + break; + default: + pr_warn("%s ramp_delay: %d not supported, setting 10000\n", + rdev->desc->name, ramp_delay); + } + + return regmap_update_bits(rdev->regmap, reg, + RK808_RAMP_RATE_MASK, ramp_value); +} + +static struct regulator_ops rk808_buck1_2_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_ramp_delay = rk808_set_ramp_delay, +}; + +static struct regulator_ops rk808_reg_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops rk808_switch_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc rk808_reg[] = { + { + .name = "DCDC_REG1", + .supply_name = "vcc1", + .id = RK808_ID_DCDC1, + .ops = &rk808_buck1_2_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 64, + .linear_ranges = rk808_buck_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges), + .vsel_reg = RK808_BUCK1_ON_VSEL_REG, + .vsel_mask = RK808_BUCK_VSEL_MASK, + .enable_reg = RK808_DCDC_EN_REG, + .enable_mask = BIT(0), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG2", + .supply_name = "vcc2", + .id = RK808_ID_DCDC2, + .ops = &rk808_buck1_2_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 64, + .linear_ranges = rk808_buck_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges), + .vsel_reg = RK808_BUCK2_ON_VSEL_REG, + .vsel_mask = RK808_BUCK_VSEL_MASK, + .enable_reg = RK808_DCDC_EN_REG, + .enable_mask = BIT(1), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG3", + .supply_name = "vcc3", + .id = RK808_ID_DCDC3, + .ops = &rk808_switch_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .enable_reg = RK808_DCDC_EN_REG, + .enable_mask = BIT(2), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG4", + .supply_name = "vcc4", + .id = RK808_ID_DCDC4, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 16, + .linear_ranges = rk808_buck4_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges), + .vsel_reg = RK808_BUCK4_ON_VSEL_REG, + .vsel_mask = RK808_BUCK4_VSEL_MASK, + .enable_reg = RK808_DCDC_EN_REG, + .enable_mask = BIT(3), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG1", + .supply_name = "vcc6", + .id = RK808_ID_LDO1, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 17, + .linear_ranges = rk808_ldo_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges), + .vsel_reg = RK808_LDO1_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(0), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG2", + .supply_name = "vcc6", + .id = RK808_ID_LDO2, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 17, + .linear_ranges = rk808_ldo_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges), + .vsel_reg = RK808_LDO2_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(1), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG3", + .supply_name = "vcc7", + .id = RK808_ID_LDO3, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 16, + .linear_ranges = rk808_ldo3_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges), + .vsel_reg = RK808_LDO3_ON_VSEL_REG, + .vsel_mask = RK808_BUCK4_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(2), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG4", + .supply_name = "vcc9", + .id = RK808_ID_LDO4, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 17, + .linear_ranges = rk808_ldo_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges), + .vsel_reg = RK808_LDO4_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(3), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG5", + .supply_name = "vcc9", + .id = RK808_ID_LDO5, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 17, + .linear_ranges = rk808_ldo_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges), + .vsel_reg = RK808_LDO5_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(4), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG6", + .supply_name = "vcc10", + .id = RK808_ID_LDO6, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 18, + .linear_ranges = rk808_ldo6_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges), + .vsel_reg = RK808_LDO6_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(5), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG7", + .supply_name = "vcc7", + .id = RK808_ID_LDO7, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 18, + .linear_ranges = rk808_ldo6_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges), + .vsel_reg = RK808_LDO7_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(6), + .owner = THIS_MODULE, + }, { + .name = "LDO_REG8", + .supply_name = "vcc11", + .id = RK808_ID_LDO8, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 17, + .linear_ranges = rk808_ldo_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges), + .vsel_reg = RK808_LDO8_ON_VSEL_REG, + .vsel_mask = RK808_LDO_VSEL_MASK, + .enable_reg = RK808_LDO_EN_REG, + .enable_mask = BIT(7), + .owner = THIS_MODULE, + }, { + .name = "SWITCH_REG1", + .supply_name = "vcc8", + .id = RK808_ID_SWITCH1, + .ops = &rk808_switch_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = RK808_DCDC_EN_REG, + .enable_mask = BIT(5), + .owner = THIS_MODULE, + }, { + .name = "SWITCH_REG2", + .supply_name = "vcc12", + .id = RK808_ID_SWITCH2, + .ops = &rk808_switch_ops, + .type = REGULATOR_VOLTAGE, + .enable_reg = RK808_DCDC_EN_REG, + .enable_mask = BIT(6), + .owner = THIS_MODULE, + }, +}; + +static struct of_regulator_match rk808_reg_matches[] = { + [RK808_ID_DCDC1] = { .name = "DCDC_REG1" }, + [RK808_ID_DCDC2] = { .name = "DCDC_REG2" }, + [RK808_ID_DCDC3] = { .name = "DCDC_REG3" }, + [RK808_ID_DCDC4] = { .name = "DCDC_REG4" }, + [RK808_ID_LDO1] = { .name = "LDO_REG1" }, + [RK808_ID_LDO2] = { .name = "LDO_REG2" }, + [RK808_ID_LDO3] = { .name = "LDO_REG3" }, + [RK808_ID_LDO4] = { .name = "LDO_REG4" }, + [RK808_ID_LDO5] = { .name = "LDO_REG5" }, + [RK808_ID_LDO6] = { .name = "LDO_REG6" }, + [RK808_ID_LDO7] = { .name = "LDO_REG7" }, + [RK808_ID_LDO8] = { .name = "LDO_REG8" }, + [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" }, + [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" }, +}; + +static int rk808_regulator_probe(struct platform_device *pdev) +{ + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); + struct i2c_client *client = rk808->i2c; + struct device_node *reg_np; + struct regulator_config config = {}; + struct regulator_dev *rk808_rdev; + int ret, i; + + reg_np = of_get_child_by_name(client->dev.of_node, "regulators"); + if (!reg_np) + return -ENXIO; + + ret = of_regulator_match(&pdev->dev, reg_np, rk808_reg_matches, + RK808_NUM_REGULATORS); + of_node_put(reg_np); + if (ret < 0) + return ret; + + /* Instantiate the regulators */ + for (i = 0; i < RK808_NUM_REGULATORS; i++) { + if (!rk808_reg_matches[i].init_data || + !rk808_reg_matches[i].of_node) + continue; + + config.dev = &client->dev; + config.driver_data = rk808; + config.regmap = rk808->regmap; + config.of_node = rk808_reg_matches[i].of_node; + config.init_data = rk808_reg_matches[i].init_data; + + rk808_rdev = devm_regulator_register(&pdev->dev, + &rk808_reg[i], &config); + if (IS_ERR(rk808_rdev)) { + dev_err(&client->dev, + "failed to register %d regulator\n", i); + return PTR_ERR(rk808_rdev); + } + } + + return 0; +} + +static struct platform_driver rk808_regulator_driver = { + .probe = rk808_regulator_probe, + .driver = { + .name = "rk808-regulator", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(rk808_regulator_driver); + +MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs"); +MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>"); +MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rk808-regulator"); |