diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 11 | ||||
| -rw-r--r-- | drivers/regulator/fan53555.c | 18 | ||||
| -rw-r--r-- | drivers/regulator/gpio-regulator.c | 6 | ||||
| -rw-r--r-- | drivers/regulator/helpers.c | 23 | ||||
| -rw-r--r-- | drivers/regulator/hi655x-regulator.c | 227 | ||||
| -rw-r--r-- | drivers/regulator/lp872x.c | 38 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 6 |
9 files changed, 333 insertions, 5 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 74a6354eaefa..39b422b97ec0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -270,6 +270,14 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_HI655X + tristate "Hisilicon HI655X PMIC regulators support" + depends on ARCH_HISI || COMPILE_TEST + depends on MFD_HI655X_PMIC && OF + help + This driver provides support for the voltage regulators of the + Hisilicon Hi655x PMIC device. + config REGULATOR_ISL9305 tristate "Intersil ISL9305 regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 348cfd727350..bba7b7093bac 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o +obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 055f8c1a83a8..1cff11205642 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1139,6 +1139,17 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + if (rdev->constraints->active_discharge && ops->set_active_discharge) { + bool ad_state = (rdev->constraints->active_discharge == + REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; + + ret = ops->set_active_discharge(rdev, ad_state); + if (ret < 0) { + rdev_err(rdev, "failed to set active discharge\n"); + return ret; + } + } + print_constraints(rdev); return 0; } diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 4940e8287df6..2cb5cc311610 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) return 0; } +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, VSEL_BUCK_EN); +} + +static int fan53555_set_suspend_disable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, 0); +} + static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct fan53555_device_info *di = rdev_get_drvdata(rdev); @@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = { .set_mode = fan53555_set_mode, .get_mode = fan53555_get_mode, .set_ramp_delay = fan53555_set_ramp, + .set_suspend_enable = fan53555_set_suspend_enable, + .set_suspend_disable = fan53555_set_suspend_disable, }; static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 7bba8b747f30..a8718e98674a 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -283,8 +283,10 @@ static int gpio_regulator_probe(struct platform_device *pdev) drvdata->nr_gpios = config->nr_gpios; ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); if (ret) { - dev_err(&pdev->dev, - "Could not obtain regulator setting GPIOs: %d\n", ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Could not obtain regulator setting GPIOs: %d\n", + ret); goto err_memstate; } } diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index 3bbb32680a94..b1e32e7482e9 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -465,3 +465,26 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) return 0; } EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_set_active_discharge_regmap - Default set_active_discharge() + * using regmap + * + * @rdev: device to operate on. + * @enable: state to set, 0 to disable and 1 to enable. + */ +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->active_discharge_on; + else + val = rdev->desc->active_discharge_off; + + return regmap_update_bits(rdev->regmap, + rdev->desc->active_discharge_reg, + rdev->desc->active_discharge_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap); diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c new file mode 100644 index 000000000000..aca18466f522 --- /dev/null +++ b/drivers/regulator/hi655x-regulator.c @@ -0,0 +1,227 @@ +/* + * Device driver for regulators in Hi655x IC + * + * Copyright (c) 2016 Hisilicon. + * + * Authors: + * Chen Feng <puck.chen@hisilicon.com> + * Fei Wang <w.f@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/hi655x-pmic.h> + +struct hi655x_regulator { + unsigned int disable_reg; + unsigned int status_reg; + unsigned int ctrl_regs; + unsigned int ctrl_mask; + struct regulator_desc rdesc; +}; + +/* LDO7 & LDO10 */ +static const unsigned int ldo7_voltages[] = { + 1800000, 1850000, 2850000, 2900000, + 3000000, 3100000, 3200000, 3300000, +}; + +static const unsigned int ldo19_voltages[] = { + 1800000, 1850000, 1900000, 1750000, + 2800000, 2850000, 2900000, 3000000, +}; + +static const unsigned int ldo22_voltages[] = { + 900000, 1000000, 1050000, 1100000, + 1150000, 1175000, 1185000, 1200000, +}; + +enum hi655x_regulator_id { + HI655X_LDO0, + HI655X_LDO1, + HI655X_LDO2, + HI655X_LDO3, + HI655X_LDO4, + HI655X_LDO5, + HI655X_LDO6, + HI655X_LDO7, + HI655X_LDO8, + HI655X_LDO9, + HI655X_LDO10, + HI655X_LDO11, + HI655X_LDO12, + HI655X_LDO13, + HI655X_LDO14, + HI655X_LDO15, + HI655X_LDO16, + HI655X_LDO17, + HI655X_LDO18, + HI655X_LDO19, + HI655X_LDO20, + HI655X_LDO21, + HI655X_LDO22, +}; + +static int hi655x_is_enabled(struct regulator_dev *rdev) +{ + unsigned int value = 0; + + struct hi655x_regulator *regulator = rdev_get_drvdata(rdev); + + regmap_read(rdev->regmap, regulator->status_reg, &value); + return (value & BIT(regulator->ctrl_mask)); +} + +static int hi655x_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + struct hi655x_regulator *regulator = rdev_get_drvdata(rdev); + + ret = regmap_write(rdev->regmap, regulator->disable_reg, + BIT(regulator->ctrl_mask)); + return ret; +} + +static struct regulator_ops hi655x_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = hi655x_disable, + .is_enabled = hi655x_is_enabled, + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static struct regulator_ops hi655x_ldo_linear_ops = { + .enable = regulator_enable_regmap, + .disable = hi655x_disable, + .is_enabled = hi655x_is_enabled, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg, \ + sreg, cmask, vtable) { \ + .rdesc = { \ + .name = #_ID, \ + .of_match = of_match_ptr(#_ID), \ + .ops = &hi655x_regulator_ops, \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ + .id = HI655X_##_ID, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(vtable), \ + .volt_table = vtable, \ + .vsel_reg = HI655X_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI655X_BUS_ADDR(ereg), \ + .enable_mask = BIT(cmask), \ + }, \ + .disable_reg = HI655X_BUS_ADDR(dreg), \ + .status_reg = HI655X_BUS_ADDR(sreg), \ + .ctrl_mask = cmask, \ +} + +#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg, \ + sreg, cmask, minv, nvolt, vstep) { \ + .rdesc = { \ + .name = #_ID, \ + .of_match = of_match_ptr(#_ID), \ + .ops = &hi655x_ldo_linear_ops, \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ + .id = HI655X_##_ID, \ + .owner = THIS_MODULE, \ + .min_uV = minv, \ + .n_voltages = nvolt, \ + .uV_step = vstep, \ + .vsel_reg = HI655X_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI655X_BUS_ADDR(ereg), \ + .enable_mask = BIT(cmask), \ + }, \ + .disable_reg = HI655X_BUS_ADDR(dreg), \ + .status_reg = HI655X_BUS_ADDR(sreg), \ + .ctrl_mask = cmask, \ +} + +static struct hi655x_regulator regulators[] = { + HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01, + 2500000, 8, 100000), + HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages), + HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages), + HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04, + 1600000, 8, 50000), + HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05, + 2500000, 8, 100000), + HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06, + 1600000, 8, 50000), + HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00, + 2500000, 8, 100000), + HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages), + HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04, + 1650000, 8, 50000), + HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages), +}; + +static int hi655x_regulator_probe(struct platform_device *pdev) +{ + unsigned int i; + struct hi655x_regulator *regulator; + struct hi655x_pmic *pmic; + struct regulator_config config = { }; + struct regulator_dev *rdev; + + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) { + dev_err(&pdev->dev, "no pmic in the regulator parent node\n"); + return -ENODEV; + } + + regulator = devm_kzalloc(&pdev->dev, sizeof(*regulator), GFP_KERNEL); + if (!regulator) + return -ENOMEM; + + platform_set_drvdata(pdev, regulator); + + config.dev = pdev->dev.parent; + config.regmap = pmic->regmap; + config.driver_data = regulator; + for (i = 0; i < ARRAY_SIZE(regulators); i++) { + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i].rdesc, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + regulator->rdesc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static struct platform_driver hi655x_regulator_driver = { + .driver = { + .name = "hi655x-regulator", + }, + .probe = hi655x_regulator_probe, +}; +module_platform_driver(hi655x_regulator_driver); + +MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>"); +MODULE_DESCRIPTION("Hisilicon Hi655x regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 19d758486553..38992112fd6e 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -15,6 +15,7 @@ #include <linux/regmap.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/delay.h> #include <linux/regulator/lp872x.h> #include <linux/regulator/driver.h> #include <linux/platform_device.h> @@ -738,10 +739,8 @@ static int lp872x_init_dvs(struct lp872x *lp) goto set_default_dvs_mode; gpio = dvs->gpio; - if (!gpio_is_valid(gpio)) { - dev_warn(lp->dev, "invalid gpio: %d\n", gpio); + if (!gpio_is_valid(gpio)) goto set_default_dvs_mode; - } pinstate = dvs->init_state; ret = devm_gpio_request_one(lp->dev, gpio, pinstate, "LP872X DVS"); @@ -759,6 +758,33 @@ set_default_dvs_mode: default_dvs_mode[lp->chipid]); } +static int lp872x_hw_enable(struct lp872x *lp) +{ + int ret, gpio; + + if (!lp->pdata) + return -EINVAL; + + gpio = lp->pdata->enable_gpio; + if (!gpio_is_valid(gpio)) + return 0; + + /* Always set enable GPIO high. */ + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); + if (ret) { + dev_err(lp->dev, "gpio request err: %d\n", ret); + return ret; + } + + /* Each chip has a different enable delay. */ + if (lp->chipid == LP8720) + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); + else + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); + + return 0; +} + static int lp872x_config(struct lp872x *lp) { struct lp872x_platform_data *pdata = lp->pdata; @@ -877,6 +903,8 @@ static struct lp872x_platform_data of_property_read_u8(np, "ti,dvs-state", &dvs_state); pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); + if (of_get_child_count(np) == 0) goto out; @@ -950,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) lp->chipid = id->driver_data; i2c_set_clientdata(cl, lp); + ret = lp872x_hw_enable(lp); + if (ret) + return ret; + ret = lp872x_config(lp); if (ret) return ret; diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 499e437c7e91..fe2e33441dae 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -93,6 +93,12 @@ static void of_get_regulation_constraints(struct device_node *np, constraints->soft_start = of_property_read_bool(np, "regulator-soft-start"); + ret = of_property_read_u32(np, "regulator-active-discharge", &pval); + if (!ret) { + constraints->active_discharge = + (pval) ? REGULATOR_ACTIVE_DISCHARGE_ENABLE : + REGULATOR_ACTIVE_DISCHARGE_DISABLE; + } if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) { if (desc && desc->of_map_mode) { |