1 files changed, 1 insertions, 76 deletions
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d849ffa378b1..4f5ca794bb71 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -97,9 +97,6 @@
  * and macros and include this file in your driver.
  *
  * These macros control options :
- * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
- * defined.
- *
  * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
  * for commands that return with a CHECK CONDITION status.
  *
@@ -127,9 +124,7 @@
  * NCR5380_dma_residual   - residual byte count
  *
  * The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID.  If the
- * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used.
+ * after setting the appropriate host specific fields and ID.
  */
 
 #ifndef NCR5380_io_delay
@@ -351,76 +346,6 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
 }
 #endif
 
-
-static int probe_irq;
-
-/**
- * probe_intr	-	helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
- *
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
- */
-
-static irqreturn_t probe_intr(int irq, void *dev_id)
-{
-	probe_irq = irq;
-	return IRQ_HANDLED;
-}
-
-/**
- * NCR5380_probe_irq	-	find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
- *
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
- */
-
-static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
-						int possible)
-{
-	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	unsigned long timeout;
-	int trying_irqs, i, mask;
-
-	for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
-		if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
-			trying_irqs |= mask;
-
-	timeout = jiffies + msecs_to_jiffies(250);
-	probe_irq = NO_IRQ;
-
-	/*
-	 * A interrupt is triggered whenever BSY = false, SEL = true
-	 * and a bit set in the SELECT_ENABLE_REG is asserted on the
-	 * SCSI bus.
-	 *
-	 * Note that the bus is only driven when the phase control signals
-	 * (I/O, C/D, and MSG) match those in the TCR, so we must reset that
-	 * to zero.
-	 */
-
-	NCR5380_write(TARGET_COMMAND_REG, 0);
-	NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-	NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
-
-	while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
-		schedule_timeout_uninterruptible(1);
-
-	NCR5380_write(SELECT_ENABLE_REG, 0);
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-	for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
-		if (trying_irqs & mask)
-			free_irq(i, NULL);
-
-	return probe_irq;
-}
-
 /**
  * NCR58380_info - report driver and host information
  * @instance: relevant scsi host instance