diff options
Diffstat (limited to 'drivers/scsi/lpfc')
| -rw-r--r-- | drivers/scsi/lpfc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 93 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_crtn.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_debugfs.h | 18 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_hw4.h | 45 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 233 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.c | 32 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 131 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli4.h | 1 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_version.h | 2 |
12 files changed, 463 insertions, 104 deletions
diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile index fe5d396aca73..e2516ba8ebfa 100644 --- a/drivers/scsi/lpfc/Makefile +++ b/drivers/scsi/lpfc/Makefile @@ -22,7 +22,9 @@ ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage ccflags-$(GCOV) += -O0 +ifdef WARNINGS_BECOME_ERRORS ccflags-y += -Werror +endif obj-$(CONFIG_SCSI_LPFC) := lpfc.o diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index e5da6da20f8a..a65c05a8d488 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -96,6 +96,10 @@ struct lpfc_sli2_slim; /* queue dump line buffer size */ #define LPFC_LBUF_SZ 128 +/* mailbox system shutdown options */ +#define LPFC_MBX_NO_WAIT 0 +#define LPFC_MBX_WAIT 1 + enum lpfc_polling_flags { ENABLE_FCP_RING_POLLING = 0x1, DISABLE_FCP_RING_INT = 0x2 diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5eb2bc116183..adef5bb2100e 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -3617,6 +3617,91 @@ lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val) static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR, lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store); +/** + * lpfc_fcp_imax_store + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: string with the number of fast-path FCP interrupts per second. + * @count: unused variable. + * + * Description: + * If val is in a valid range [636,651042], then set the adapter's + * maximum number of fast-path FCP interrupts per second. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0, i; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + /* Value range is [636,651042] */ + if (val < LPFC_MIM_IMAX || val > LPFC_DMULT_CONST) + return -EINVAL; + + phba->cfg_fcp_imax = (uint32_t)val; + for (i = 0; i < phba->cfg_fcp_eq_count; i += LPFC_MAX_EQ_DELAY) + lpfc_modify_fcp_eq_delay(phba, i); + + return strlen(buf); +} + +/* +# lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second +# +# Value range is [636,651042]. Default value is 10000. +*/ +static int lpfc_fcp_imax = LPFC_FP_DEF_IMAX; +module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_fcp_imax, + "Set the maximum number of fast-path FCP interrupts per second"); +lpfc_param_show(fcp_imax) + +/** + * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [636,651042], then initialize the adapter's + * maximum number of fast-path FCP interrupts per second. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_fcp_imax_init(struct lpfc_hba *phba, int val) +{ + if (val >= LPFC_MIM_IMAX && val <= LPFC_DMULT_CONST) { + phba->cfg_fcp_imax = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3016 fcp_imax: %d out of range, using default\n", val); + phba->cfg_fcp_imax = LPFC_FP_DEF_IMAX; + + return 0; +} + +static DEVICE_ATTR(lpfc_fcp_imax, S_IRUGO | S_IWUSR, + lpfc_fcp_imax_show, lpfc_fcp_imax_store); + /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. @@ -3758,14 +3843,6 @@ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " "MSI-X (2), if possible"); /* -# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second -# -# Value range is [636,651042]. Default value is 10000. -*/ -LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST, - "Set the maximum number of fast-path FCP interrupts per second"); - -/* # lpfc_fcp_wq_count: Set the number of fast-path FCP work queues # # Value range is [1,31]. Default value is 4. diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 9b2a16f3bc79..8a2a514a2553 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -183,7 +183,7 @@ int lpfc_post_buffer(struct lpfc_hba *, struct lpfc_sli_ring *, int); void lpfc_decode_firmware_rev(struct lpfc_hba *, char *, int); int lpfc_online(struct lpfc_hba *); void lpfc_unblock_mgmt_io(struct lpfc_hba *); -void lpfc_offline_prep(struct lpfc_hba *); +void lpfc_offline_prep(struct lpfc_hba *, int); void lpfc_offline(struct lpfc_hba *); void lpfc_reset_hba(struct lpfc_hba *); @@ -273,7 +273,7 @@ int lpfc_sli_host_down(struct lpfc_vport *); int lpfc_sli_hba_down(struct lpfc_hba *); int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); int lpfc_sli_handle_mb_event(struct lpfc_hba *); -void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *); +void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *, int); int lpfc_sli_check_eratt(struct lpfc_hba *); void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h index 616c400dae14..afe368fd1b98 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.h +++ b/drivers/scsi/lpfc/lpfc_debugfs.h @@ -395,8 +395,13 @@ lpfc_debug_dump_fcp_cq(struct lpfc_hba *phba, int fcp_wqidx) for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) if (phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id == fcp_cqid) break; - if (fcp_cqidx >= phba->cfg_fcp_eq_count) - return; + if (phba->intr_type == MSIX) { + if (fcp_cqidx >= phba->cfg_fcp_eq_count) + return; + } else { + if (fcp_cqidx > 0) + return; + } printk(KERN_ERR "FCP CQ: WQ[Idx:%d|Qid%d]->CQ[Idx%d|Qid%d]:\n", fcp_wqidx, phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id, @@ -426,8 +431,13 @@ lpfc_debug_dump_fcp_eq(struct lpfc_hba *phba, int fcp_wqidx) for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) if (phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id == fcp_cqid) break; - if (fcp_cqidx >= phba->cfg_fcp_eq_count) - return; + if (phba->intr_type == MSIX) { + if (fcp_cqidx >= phba->cfg_fcp_eq_count) + return; + } else { + if (fcp_cqidx > 0) + return; + } if (phba->cfg_fcp_eq_count == 0) { fcp_eqidx = -1; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 5bb269e224f6..9b4f92941dce 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -530,7 +530,7 @@ lpfc_work_list_done(struct lpfc_hba *phba) break; case LPFC_EVT_OFFLINE_PREP: if (phba->link_state >= LPFC_LINK_DOWN) - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); *(int *)(evtp->evt_arg1) = 0; complete((struct completion *)(evtp->evt_arg2)); break; diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index f1946dfda5b4..953603a7a43c 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -874,6 +874,7 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_MQ_CREATE 0x15 #define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20 #define LPFC_MBOX_OPCODE_NOP 0x21 +#define LPFC_MBOX_OPCODE_MODIFY_EQ_DELAY 0x29 #define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35 #define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36 #define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37 @@ -940,6 +941,13 @@ struct eq_context { uint32_t reserved3; }; +struct eq_delay_info { + uint32_t eq_id; + uint32_t phase; + uint32_t delay_multi; +}; +#define LPFC_MAX_EQ_DELAY 8 + struct sgl_page_pairs { uint32_t sgl_pg0_addr_lo; uint32_t sgl_pg0_addr_hi; @@ -1002,6 +1010,19 @@ struct lpfc_mbx_eq_create { } u; }; +struct lpfc_mbx_modify_eq_delay { + struct mbox_header header; + union { + struct { + uint32_t num_eq; + struct eq_delay_info eq[LPFC_MAX_EQ_DELAY]; + } request; + struct { + uint32_t word0; + } response; + } u; +}; + struct lpfc_mbx_eq_destroy { struct mbox_header header; union { @@ -2875,6 +2896,7 @@ struct lpfc_mqe { struct lpfc_mbx_mq_create mq_create; struct lpfc_mbx_mq_create_ext mq_create_ext; struct lpfc_mbx_eq_create eq_create; + struct lpfc_mbx_modify_eq_delay eq_delay; struct lpfc_mbx_cq_create cq_create; struct lpfc_mbx_wq_create wq_create; struct lpfc_mbx_rq_create rq_create; @@ -3084,6 +3106,28 @@ struct lpfc_acqe_fc_la { #define LPFC_FC_LA_EVENT_TYPE_SHARED_LINK 0x2 }; +struct lpfc_acqe_misconfigured_event { + struct { + uint32_t word0; +#define lpfc_sli_misconfigured_port0_SHIFT 0 +#define lpfc_sli_misconfigured_port0_MASK 0x000000FF +#define lpfc_sli_misconfigured_port0_WORD word0 +#define lpfc_sli_misconfigured_port1_SHIFT 8 +#define lpfc_sli_misconfigured_port1_MASK 0x000000FF +#define lpfc_sli_misconfigured_port1_WORD word0 +#define lpfc_sli_misconfigured_port2_SHIFT 16 +#define lpfc_sli_misconfigured_port2_MASK 0x000000FF +#define lpfc_sli_misconfigured_port2_WORD word0 +#define lpfc_sli_misconfigured_port3_SHIFT 24 +#define lpfc_sli_misconfigured_port3_MASK 0x000000FF +#define lpfc_sli_misconfigured_port3_WORD word0 + } theEvent; +#define LPFC_SLI_EVENT_STATUS_VALID 0x00 +#define LPFC_SLI_EVENT_STATUS_NOT_PRESENT 0x01 +#define LPFC_SLI_EVENT_STATUS_WRONG_TYPE 0x02 +#define LPFC_SLI_EVENT_STATUS_UNSUPPORTED 0x03 +}; + struct lpfc_acqe_sli { uint32_t event_data1; uint32_t event_data2; @@ -3094,6 +3138,7 @@ struct lpfc_acqe_sli { #define LPFC_SLI_EVENT_TYPE_NORM_TEMP 0x3 #define LPFC_SLI_EVENT_TYPE_NVLOG_POST 0x4 #define LPFC_SLI_EVENT_TYPE_DIAG_DUMP 0x5 +#define LPFC_SLI_EVENT_TYPE_MISCONFIGURED 0x9 }; /* diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 411ed48d79da..45c15208be9f 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -73,6 +73,8 @@ static int lpfc_hba_down_post_s4(struct lpfc_hba *phba); static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *); static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *); static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *); +static void lpfc_sli4_disable_intr(struct lpfc_hba *); +static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t); static struct scsi_transport_template *lpfc_transport_template = NULL; static struct scsi_transport_template *lpfc_vport_transport_template = NULL; @@ -1169,7 +1171,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba) spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI_ACTIVE; spin_unlock_irq(&phba->hbalock); - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_reset_barrier(phba); @@ -1193,7 +1195,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba) static void lpfc_sli4_offline_eratt(struct lpfc_hba *phba) { - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_sli4_brdreset(phba); lpfc_hba_down_post(phba); @@ -1251,7 +1253,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba) * There was a firmware error. Take the hba offline and then * attempt to restart it. */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); /* Wait for the ER1 bit to clear.*/ @@ -1372,7 +1374,7 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) * There was a firmware error. Take the hba offline and then * attempt to restart it. */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); if (lpfc_online(phba) == 0) { /* Initialize the HBA */ @@ -1428,6 +1430,54 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) } /** + * lpfc_sli4_port_sta_fn_reset - The SLI4 function reset due to port status reg + * @phba: pointer to lpfc hba data structure. + * @mbx_action: flag for mailbox shutdown action. + * + * This routine is invoked to perform an SLI4 port PCI function reset in + * response to port status register polling attention. It waits for port + * status register (ERR, RDY, RN) bits before proceeding with function reset. + * During this process, interrupt vectors are freed and later requested + * for handling possible port resource change. + **/ +static int +lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action) +{ + int rc; + uint32_t intr_mode; + + /* + * On error status condition, driver need to wait for port + * ready before performing reset. + */ + rc = lpfc_sli4_pdev_status_reg_wait(phba); + if (!rc) { + /* need reset: attempt for port recovery */ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2887 Reset Needed: Attempting Port " + "Recovery...\n"); + lpfc_offline_prep(phba, mbx_action); + lpfc_offline(phba); + /* release interrupt for possible resource change */ + lpfc_sli4_disable_intr(phba); + lpfc_sli_brdrestart(phba); + /* request and enable interrupt */ + intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3175 Failed to enable interrupt\n"); + return -EIO; + } else { + phba->intr_mode = intr_mode; + } + rc = lpfc_online(phba); + if (rc == 0) + lpfc_unblock_mgmt_io(phba); + } + return rc; +} + +/** * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler * @phba: pointer to lpfc hba data structure. * @@ -1506,30 +1556,18 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) reg_err2 == SLIPORT_ERR2_REG_FUNC_PROVISON) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3145 Port Down: Provisioning\n"); - /* - * On error status condition, driver need to wait for port - * ready before performing reset. - */ - rc = lpfc_sli4_pdev_status_reg_wait(phba); - if (!rc) { - /* need reset: attempt for port recovery */ - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2887 Reset Needed: Attempting Port " - "Recovery...\n"); - lpfc_offline_prep(phba); - lpfc_offline(phba); - lpfc_sli_brdrestart(phba); - if (lpfc_online(phba) == 0) { - lpfc_unblock_mgmt_io(phba); - /* don't report event on forced debug dump */ - if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && - reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP) - return; - else - break; - } - /* fall through for not able to recover */ + + /* Check port status register for function reset */ + rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT); + if (rc == 0) { + /* don't report event on forced debug dump */ + if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && + reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP) + return; + else + break; } + /* fall through for not able to recover */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "3152 Unrecoverable error, bring the port " "offline\n"); @@ -2494,15 +2532,19 @@ lpfc_stop_hba_timers(struct lpfc_hba *phba) * driver prepares the HBA interface for online or offline. **/ static void -lpfc_block_mgmt_io(struct lpfc_hba * phba) +lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action) { unsigned long iflag; uint8_t actcmd = MBX_HEARTBEAT; unsigned long timeout; - timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; spin_lock_irqsave(&phba->hbalock, iflag); phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO; + spin_unlock_irqrestore(&phba->hbalock, iflag); + if (mbx_action == LPFC_MBX_NO_WAIT) + return; + timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; + spin_lock_irqsave(&phba->hbalock, iflag); if (phba->sli.mbox_active) { actcmd = phba->sli.mbox_active->u.mb.mbxCommand; /* Determine how long we might wait for the active mailbox @@ -2592,7 +2634,7 @@ lpfc_online(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0458 Bring Adapter online\n"); - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT); if (!lpfc_sli_queue_setup(phba)) { lpfc_unblock_mgmt_io(phba); @@ -2660,7 +2702,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) * queue to make it ready to be brought offline. **/ void -lpfc_offline_prep(struct lpfc_hba * phba) +lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) { struct lpfc_vport *vport = phba->pport; struct lpfc_nodelist *ndlp, *next_ndlp; @@ -2671,7 +2713,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) if (vport->fc_flag & FC_OFFLINE_MODE) return; - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, mbx_action); lpfc_linkdown(phba); @@ -2718,7 +2760,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } lpfc_destroy_vport_work_array(phba, vports); - lpfc_sli_mbox_sys_shutdown(phba); + lpfc_sli_mbox_sys_shutdown(phba, mbx_action); } /** @@ -3684,12 +3726,76 @@ out_free_pmb: static void lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli) { - lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "2901 Async SLI event - Event Data1:x%08x Event Data2:" - "x%08x SLI Event Type:%d", - acqe_sli->event_data1, acqe_sli->event_data2, - bf_get(lpfc_trailer_type, acqe_sli)); - return; + char port_name; + char message[80]; + uint8_t status; + struct lpfc_acqe_misconfigured_event *misconfigured; + + /* special case misconfigured event as it contains data for all ports */ + if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) || + (bf_get(lpfc_trailer_type, acqe_sli) != + LPFC_SLI_EVENT_TYPE_MISCONFIGURED)) { + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2901 Async SLI event - Event Data1:x%08x Event Data2:" + "x%08x SLI Event Type:%d\n", + acqe_sli->event_data1, acqe_sli->event_data2, + bf_get(lpfc_trailer_type, acqe_sli)); + return; + } + + port_name = phba->Port[0]; + if (port_name == 0x00) + port_name = '?'; /* get port name is empty */ + + misconfigured = (struct lpfc_acqe_misconfigured_event *) + &acqe_sli->event_data1; + + /* fetch the status for this port */ + switch (phba->sli4_hba.lnk_info.lnk_no) { + case LPFC_LINK_NUMBER_0: + status = bf_get(lpfc_sli_misconfigured_port0, + &misconfigured->theEvent); + break; + case LPFC_LINK_NUMBER_1: + status = bf_get(lpfc_sli_misconfigured_port1, + &misconfigured->theEvent); + break; + case LPFC_LINK_NUMBER_2: + status = bf_get(lpfc_sli_misconfigured_port2, + &misconfigured->theEvent); + break; + case LPFC_LINK_NUMBER_3: + status = bf_get(lpfc_sli_misconfigured_port3, + &misconfigured->theEvent); + break; + default: + status = ~LPFC_SLI_EVENT_STATUS_VALID; + break; + } + + switch (status) { + case LPFC_SLI_EVENT_STATUS_VALID: + return; /* no message if the sfp is okay */ + case LPFC_SLI_EVENT_STATUS_NOT_PRESENT: + sprintf(message, "Not installed"); + break; + case LPFC_SLI_EVENT_STATUS_WRONG_TYPE: + sprintf(message, + "Optics of two types installed"); + break; + case LPFC_SLI_EVENT_STATUS_UNSUPPORTED: + sprintf(message, "Incompatible optics"); + break; + default: + /* firmware is reporting a status we don't know about */ + sprintf(message, "Unknown event status x%02x", status); + break; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3176 Misconfigured Physical Port - " + "Port Name %c %s\n", port_name, message); } /** @@ -4312,7 +4418,7 @@ lpfc_reset_hba(struct lpfc_hba *phba) phba->link_state = LPFC_HBA_ERROR; return; } - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); lpfc_online(phba); @@ -5514,14 +5620,45 @@ lpfc_destroy_shost(struct lpfc_hba *phba) static void lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost) { + uint32_t old_mask; + uint32_t old_guard; + int pagecnt = 10; if (lpfc_prot_mask && lpfc_prot_guard) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "1478 Registering BlockGuard with the " "SCSI layer\n"); - scsi_host_set_prot(shost, lpfc_prot_mask); - scsi_host_set_guard(shost, lpfc_prot_guard); + + old_mask = lpfc_prot_mask; + old_guard = lpfc_prot_guard; + + /* Only allow supported values */ + lpfc_prot_mask &= (SHOST_DIF_TYPE1_PROTECTION | + SHOST_DIX_TYPE0_PROTECTION | + SHOST_DIX_TYPE1_PROTECTION); + lpfc_prot_guard &= (SHOST_DIX_GUARD_IP | SHOST_DIX_GUARD_CRC); + + /* DIF Type 1 protection for profiles AST1/C1 is end to end */ + if (lpfc_prot_mask == SHOST_DIX_TYPE1_PROTECTION) + lpfc_prot_mask |= SHOST_DIF_TYPE1_PROTECTION; + + if (lpfc_prot_mask && lpfc_prot_guard) { + if ((old_mask != lpfc_prot_mask) || + (old_guard != lpfc_prot_guard)) + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1475 Registering BlockGuard with the " + "SCSI layer: mask %d guard %d\n", + lpfc_prot_mask, lpfc_prot_guard); + + scsi_host_set_prot(shost, lpfc_prot_mask); + scsi_host_set_guard(shost, lpfc_prot_guard); + } else + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "1479 Not Registering BlockGuard with the SCSI " + "layer, Bad protection parameters: %d %d\n", + old_mask, old_guard); } + if (!_dump_buf_data) { while (pagecnt) { spin_lock_init(&_dump_buf_lock); @@ -8859,7 +8996,7 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg) "0473 PCI device Power Management suspend.\n"); /* Bring down the device */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); kthread_stop(phba->worker_thread); @@ -8985,7 +9122,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) "2710 PCI channel disable preparing for reset\n"); /* Block any management I/Os to the device */ - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT); /* Block all SCSI devices' I/Os on the host */ lpfc_scsi_dev_block(phba); @@ -9129,7 +9266,7 @@ lpfc_io_slot_reset_s3(struct pci_dev *pdev) phba->intr_mode = intr_mode; /* Take device offline, it will perform cleanup */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); @@ -9603,7 +9740,7 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg) "2843 PCI device Power Management suspend.\n"); /* Bring down the device */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); kthread_stop(phba->worker_thread); @@ -9729,7 +9866,7 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba) "2826 PCI channel disable preparing for reset\n"); /* Block any management I/Os to the device */ - lpfc_block_mgmt_io(phba); + lpfc_block_mgmt_io(phba, LPFC_MBX_NO_WAIT); /* Block all SCSI devices' I/Os on the host */ lpfc_scsi_dev_block(phba); @@ -9902,7 +10039,7 @@ lpfc_io_resume_s4(struct pci_dev *pdev) */ if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) { /* Perform device reset */ - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); /* Bring the device back online */ diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 66e09069f281..925975d2d765 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -4275,10 +4275,8 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) * Catch race where our node has transitioned, but the * transport is still transitioning. */ - if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { - cmnd->result = ScsiResult(DID_IMM_RETRY, 0); - goto out_fail_command; - } + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) + goto out_tgt_busy; if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) goto out_tgt_busy; @@ -4412,12 +4410,12 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) struct lpfc_iocbq *abtsiocb; struct lpfc_scsi_buf *lpfc_cmd; IOCB_t *cmd, *icmd; - int ret = SUCCESS; + int ret = SUCCESS, status = 0; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq); - ret = fc_block_scsi_eh(cmnd); - if (ret) - return ret; + status = fc_block_scsi_eh(cmnd); + if (status) + return status; spin_lock_irq(&phba->hbalock); /* driver queued commands are in process of being flushed */ @@ -4435,7 +4433,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "2873 SCSI Layer I/O Abort Request IO CMPL Status " "x%x ID %d LUN %d\n", - ret, cmnd->device->id, cmnd->device->lun); + SUCCESS, cmnd->device->id, cmnd->device->lun); return SUCCESS; } @@ -4762,7 +4760,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) unsigned tgt_id = cmnd->device->id; unsigned int lun_id = cmnd->device->lun; struct lpfc_scsi_event_header scsi_event; - int status; + int status, ret = SUCCESS; if (!rdata) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, @@ -4803,9 +4801,9 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) * So, continue on. * We will report success if all the i/o aborts successfully. */ - status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, + ret = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, LPFC_CTX_LUN); - return status; + return ret; } /** @@ -4829,7 +4827,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd) unsigned tgt_id = cmnd->device->id; unsigned int lun_id = cmnd->device->lun; struct lpfc_scsi_event_header scsi_event; - int status; + int status, ret = SUCCESS; if (!rdata) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, @@ -4870,9 +4868,9 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd) * So, continue on. * We will report success if all the i/o aborts successfully. */ - status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, - LPFC_CTX_TGT); - return status; + ret = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, + LPFC_CTX_TGT); + return ret; } /** @@ -4982,7 +4980,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_hba *phba = vport->phba; int rc, ret = SUCCESS; - lpfc_offline_prep(phba); + lpfc_offline_prep(phba, LPFC_MBX_WAIT); lpfc_offline(phba); rc = lpfc_sli_brdrestart(phba); if (rc) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index b4720a109817..9cbd20b1328b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -8984,7 +8984,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) int i; /* Shutdown the mailbox command sub-system */ - lpfc_sli_mbox_sys_shutdown(phba); + lpfc_sli_mbox_sys_shutdown(phba, LPFC_MBX_WAIT); lpfc_hba_down_prep(phba); @@ -9996,11 +9996,17 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, * sub-system flush routine to gracefully bring down mailbox sub-system. **/ void -lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) +lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba, int mbx_action) { struct lpfc_sli *psli = &phba->sli; unsigned long timeout; + if (mbx_action == LPFC_MBX_NO_WAIT) { + /* delay 100ms for port state */ + msleep(100); + lpfc_sli_mbox_sys_flush(phba); + return; + } timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; spin_lock_irq(&phba->hbalock); @@ -12042,6 +12048,83 @@ out_fail: } /** + * lpfc_modify_fcp_eq_delay - Modify Delay Multiplier on FCP EQs + * @phba: HBA structure that indicates port to create a queue on. + * @startq: The starting FCP EQ to modify + * + * This function sends an MODIFY_EQ_DELAY mailbox command to the HBA. + * + * The @phba struct is used to send mailbox command to HBA. The @startq + * is used to get the starting FCP EQ to change. + * This function is asynchronous and will wait for the mailbox + * command to finish before continuing. + * + * On success this function will return a zero. If unable to allocate enough + * memory this function will return -ENOMEM. If the queue create mailbox command + * fails this function will return -ENXIO. + **/ +uint32_t +lpfc_modify_fcp_eq_delay(struct lpfc_hba *phba, uint16_t startq) +{ + struct lpfc_mbx_modify_eq_delay *eq_delay; + LPFC_MBOXQ_t *mbox; + struct lpfc_queue *eq; + int cnt, rc, length, status = 0; + uint32_t shdr_status, shdr_add_status; + int fcp_eqidx; + union lpfc_sli4_cfg_shdr *shdr; + uint16_t dmult; + + if (startq >= phba->cfg_fcp_eq_count) + return 0; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + length = (sizeof(struct lpfc_mbx_modify_eq_delay) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_MODIFY_EQ_DELAY, + length, LPFC_SLI4_MBX_EMBED); + eq_delay = &mbox->u.mqe.un.eq_delay; + + /* Calculate delay multiper from maximum interrupt per second */ + dmult = LPFC_DMULT_CONST/phba->cfg_fcp_imax - 1; + + cnt = 0; + for (fcp_eqidx = startq; fcp_eqidx < phba->cfg_fcp_eq_count; + fcp_eqidx++) { + eq = phba->sli4_hba.fp_eq[fcp_eqidx]; + if (!eq) + continue; + eq_delay->u.request.eq[cnt].eq_id = eq->queue_id; + eq_delay->u.request.eq[cnt].phase = 0; + eq_delay->u.request.eq[cnt].delay_multi = dmult; + cnt++; + if (cnt >= LPFC_MAX_EQ_DELAY) + break; + } + eq_delay->u.request.num_eq = cnt; + + mbox->vport = phba->pport; + mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + mbox->context1 = NULL; + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + shdr = (union lpfc_sli4_cfg_shdr *) &eq_delay->header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2512 MODIFY_EQ_DELAY mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + status = -ENXIO; + } + mempool_free(mbox, phba->mbox_mem_pool); + return status; +} + +/** * lpfc_eq_create - Create an Event Queue on the HBA * @phba: HBA structure that indicates port to create a queue on. * @eq: The queue structure to use to create the event queue. @@ -12228,8 +12311,10 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0361 Unsupported CQ count. (%d)\n", cq->entry_count); - if (cq->entry_count < 256) - return -EINVAL; + if (cq->entry_count < 256) { + status = -EINVAL; + goto out; + } /* otherwise default to smallest count (drop through) */ case 256: bf_set(lpfc_cq_context_count, &cq_create->u.request.context, @@ -12420,8 +12505,10 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0362 Unsupported MQ count. (%d)\n", mq->entry_count); - if (mq->entry_count < 16) - return -EINVAL; + if (mq->entry_count < 16) { + status = -EINVAL; + goto out; + } /* otherwise default to smallest count (drop through) */ case 16: bf_set(lpfc_mq_context_ring_size, @@ -12710,8 +12797,10 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2535 Unsupported RQ count. (%d)\n", hrq->entry_count); - if (hrq->entry_count < 512) - return -EINVAL; + if (hrq->entry_count < 512) { + status = -EINVAL; + goto out; + } /* otherwise default to smallest count (drop through) */ case 512: bf_set(lpfc_rq_context_rqe_count, @@ -12791,8 +12880,10 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2536 Unsupported RQ count. (%d)\n", drq->entry_count); - if (drq->entry_count < 512) - return -EINVAL; + if (drq->entry_count < 512) { + status = -EINVAL; + goto out; + } /* otherwise default to smallest count (drop through) */ case 512: bf_set(lpfc_rq_context_rqe_count, @@ -15855,24 +15946,18 @@ lpfc_drain_txq(struct lpfc_hba *phba) spin_lock_irqsave(&phba->hbalock, iflags); piocbq = lpfc_sli_ringtx_get(phba, pring); + if (!piocbq) { + spin_unlock_irqrestore(&phba->hbalock, iflags); + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "2823 txq empty and txq_cnt is %d\n ", + pring->txq_cnt); + break; + } sglq = __lpfc_sli_get_sglq(phba, piocbq); if (!sglq) { __lpfc_sli_ringtx_put(phba, pring, piocbq); spin_unlock_irqrestore(&phba->hbalock, iflags); break; - } else { - if (!piocbq) { - /* The txq_cnt out of sync. This should - * never happen - */ - sglq = __lpfc_clear_active_sglq(phba, - sglq->sli4_lxritag); - spin_unlock_irqrestore(&phba->hbalock, iflags); - lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "2823 txq empty and txq_cnt is %d\n ", - pring->txq_cnt); - break; - } } /* The xri and iocb resources secured, diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index a4a77080091b..ec756118c5c1 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -598,6 +598,7 @@ struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t, uint32_t); void lpfc_sli4_queue_free(struct lpfc_queue *); uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t); +uint32_t lpfc_modify_fcp_eq_delay(struct lpfc_hba *, uint16_t); uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *, struct lpfc_queue *, uint32_t, uint32_t); int32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *, diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 59c57a409981..4704e5b5088e 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.31" +#define LPFC_DRIVER_VERSION "8.3.32" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" |