diff options
Diffstat (limited to 'drivers/scsi/pm8001')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 48 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 15 |
2 files changed, 54 insertions, 9 deletions
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index de9e6b2dc533..c964b124a005 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -251,6 +251,9 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) return ret; } +static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha); +static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha); + /** * pm8001_alloc - initiate our hba structure and 6 DMAs area. * @pm8001_ha:our hba structure. @@ -893,9 +896,7 @@ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha) */ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) { - u32 i = 0, j = 0; u32 number_of_intr; - int flag = 0; int rc; /* SPCv controllers supports 64 msi-x */ @@ -903,11 +904,11 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) number_of_intr = 1; } else { number_of_intr = PM8001_MAX_MSIX_VEC; - flag &= ~IRQF_SHARED; } rc = pci_alloc_irq_vectors(pm8001_ha->pdev, number_of_intr, number_of_intr, PCI_IRQ_MSIX); + number_of_intr = rc; if (rc < 0) return rc; pm8001_ha->number_of_intr = number_of_intr; @@ -915,8 +916,22 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) PM8001_INIT_DBG(pm8001_ha, pm8001_printk( "pci_alloc_irq_vectors request ret:%d no of intr %d\n", rc, pm8001_ha->number_of_intr)); + return 0; +} + +static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha) +{ + u32 i = 0, j = 0; + int flag = 0, rc = 0; - for (i = 0; i < number_of_intr; i++) { + if (pm8001_ha->chip_id != chip_8001) + flag &= ~IRQF_SHARED; + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("pci_enable_msix request number of intr %d\n", + pm8001_ha->number_of_intr)); + + for (i = 0; i < pm8001_ha->number_of_intr; i++) { snprintf(pm8001_ha->intr_drvname[i], sizeof(pm8001_ha->intr_drvname[0]), "%s-%d", pm8001_ha->name, i); @@ -941,6 +956,21 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) } #endif +static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha) +{ + struct pci_dev *pdev; + + pdev = pm8001_ha->pdev; + +#ifdef PM8001_USE_MSIX + if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) + return pm8001_setup_msix(pm8001_ha); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("MSIX not supported!!!\n")); +#endif + return 0; +} + /** * pm8001_request_irq - register interrupt * @chip_info: our ha struct. @@ -954,7 +984,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha) #ifdef PM8001_USE_MSIX if (pdev->msix_cap && pci_msi_enabled()) - return pm8001_setup_msix(pm8001_ha); + return pm8001_request_msix(pm8001_ha); else { PM8001_INIT_DBG(pm8001_ha, pm8001_printk("MSIX not supported!!!\n")); @@ -1036,6 +1066,13 @@ static int pm8001_pci_probe(struct pci_dev *pdev, rc = -ENOMEM; goto err_out_free; } + /* Setup Interrupt */ + rc = pm8001_setup_irq(pm8001_ha); + if (rc) { + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( + "pm8001_setup_irq failed [ret: %d]\n", rc)); + goto err_out_shost; + } list_add_tail(&pm8001_ha->list, &hba_list); PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); rc = PM8001_CHIP_DISP->chip_init(pm8001_ha); @@ -1048,6 +1085,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev, rc = scsi_add_host(shost, &pdev->dev); if (rc) goto err_out_ha_free; + /* Request Interrupt */ rc = pm8001_request_irq(pm8001_ha); if (rc) { PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index d1d95f1a2c6a..a3989e544bbe 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -1438,11 +1438,18 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) if (!pm8001_ha->controller_fatal_error) { /* Check if MPI is in ready state to reset */ if (mpi_uninit_check(pm8001_ha) != 0) { - regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + u32 r0 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0); + u32 r1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + u32 r2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2); + u32 r3 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( - "MPI state is not ready scratch1 :0x%x\n", - regval)); - return -1; + "MPI state is not ready scratch: %x:%x:%x:%x\n", + r0, r1, r2, r3)); + /* if things aren't ready but the bootloader is ok then + * try the reset anyway. + */ + if (r1 & SCRATCH_PAD1_BOOTSTATE_MASK) + return -1; } } /* checked for reset register normal state; 0x0 */ |