1 files changed, 1 insertions, 175 deletions
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index 36e930066649..a89aff61d3d8 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -158,180 +158,6 @@ int scsi_set_medium_removal(struct scsi_device *sdev, char state)
 EXPORT_SYMBOL(scsi_set_medium_removal);
 
 /*
- * This interface is deprecated - users should use the scsi generic (sg)
- * interface instead, as this is a more flexible approach to performing
- * generic SCSI commands on a device.
- *
- * The structure that we are passed should look like:
- *
- * struct sdata {
- *  unsigned int inlen;      [i] Length of data to be written to device 
- *  unsigned int outlen;     [i] Length of data to be read from device 
- *  unsigned char cmd[x];    [i] SCSI command (6 <= x <= 12).
- *                           [o] Data read from device starts here.
- *                           [o] On error, sense buffer starts here.
- *  unsigned char wdata[y];  [i] Data written to device starts here.
- * };
- * Notes:
- *   -  The SCSI command length is determined by examining the 1st byte
- *      of the given command. There is no way to override this.
- *   -  Data transfers are limited to PAGE_SIZE (4K on i386, 8K on alpha).
- *   -  The length (x + y) must be at least OMAX_SB_LEN bytes long to
- *      accommodate the sense buffer when an error occurs.
- *      The sense buffer is truncated to OMAX_SB_LEN (16) bytes so that
- *      old code will not be surprised.
- *   -  If a Unix error occurs (e.g. ENOMEM) then the user will receive
- *      a negative return and the Unix error code in 'errno'. 
- *      If the SCSI command succeeds then 0 is returned.
- *      Positive numbers returned are the compacted SCSI error codes (4 
- *      bytes in one int) where the lowest byte is the SCSI status.
- *      See the drivers/scsi/scsi.h file for more information on this.
- *
- */
-#define OMAX_SB_LEN 16		/* Old sense buffer length */
-
-int scsi_ioctl_send_command(struct scsi_device *sdev,
-			    struct scsi_ioctl_command __user *sic)
-{
-	char *buf;
-	unsigned char cmd[MAX_COMMAND_SIZE];
-	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
-	char __user *cmd_in;
-	unsigned char opcode;
-	unsigned int inlen, outlen, cmdlen;
-	unsigned int needed, buf_needed;
-	int timeout, retries, result;
-	int data_direction;
-	gfp_t gfp_mask = GFP_KERNEL;
-
-	if (!sic)
-		return -EINVAL;
-
-	if (sdev->host->unchecked_isa_dma)
-		gfp_mask |= GFP_DMA;
-
-	/*
-	 * Verify that we can read at least this much.
-	 */
-	if (!access_ok(VERIFY_READ, sic, sizeof(Scsi_Ioctl_Command)))
-		return -EFAULT;
-
-	if(__get_user(inlen, &sic->inlen))
-		return -EFAULT;
-		
-	if(__get_user(outlen, &sic->outlen))
-		return -EFAULT;
-
-	/*
-	 * We do not transfer more than MAX_BUF with this interface.
-	 * If the user needs to transfer more data than this, they
-	 * should use scsi_generics (sg) instead.
-	 */
-	if (inlen > MAX_BUF)
-		return -EINVAL;
-	if (outlen > MAX_BUF)
-		return -EINVAL;
-
-	cmd_in = sic->data;
-	if(get_user(opcode, cmd_in))
-		return -EFAULT;
-
-	needed = buf_needed = (inlen > outlen ? inlen : outlen);
-	if (buf_needed) {
-		buf_needed = (buf_needed + 511) & ~511;
-		if (buf_needed > MAX_BUF)
-			buf_needed = MAX_BUF;
-		buf = kzalloc(buf_needed, gfp_mask);
-		if (!buf)
-			return -ENOMEM;
-		if (inlen == 0) {
-			data_direction = DMA_FROM_DEVICE;
-		} else if (outlen == 0 ) {
-			data_direction = DMA_TO_DEVICE;
-		} else {
-			/*
-			 * Can this ever happen?
-			 */
-			data_direction = DMA_BIDIRECTIONAL;
-		}
-
-	} else {
-		buf = NULL;
-		data_direction = DMA_NONE;
-	}
-
-	/*
-	 * Obtain the command from the user's address space.
-	 */
-	cmdlen = COMMAND_SIZE(opcode);
-	
-	result = -EFAULT;
-
-	if (!access_ok(VERIFY_READ, cmd_in, cmdlen + inlen))
-		goto error;
-
-	if(__copy_from_user(cmd, cmd_in, cmdlen))
-		goto error;
-
-	/*
-	 * Obtain the data to be sent to the device (if any).
-	 */
-
-	if(inlen && copy_from_user(buf, cmd_in + cmdlen, inlen))
-		goto error;
-
-	switch (opcode) {
-	case SEND_DIAGNOSTIC:
-	case FORMAT_UNIT:
-		timeout = FORMAT_UNIT_TIMEOUT;
-		retries = 1;
-		break;
-	case START_STOP:
-		timeout = START_STOP_TIMEOUT;
-		retries = NORMAL_RETRIES;
-		break;
-	case MOVE_MEDIUM:
-		timeout = MOVE_MEDIUM_TIMEOUT;
-		retries = NORMAL_RETRIES;
-		break;
-	case READ_ELEMENT_STATUS:
-		timeout = READ_ELEMENT_STATUS_TIMEOUT;
-		retries = NORMAL_RETRIES;
-		break;
-	case READ_DEFECT_DATA:
-		timeout = READ_DEFECT_DATA_TIMEOUT;
-		retries = 1;
-		break;
-	default:
-		timeout = IOCTL_NORMAL_TIMEOUT;
-		retries = NORMAL_RETRIES;
-		break;
-	}
-
-	result = scsi_execute(sdev, cmd, data_direction, buf, needed,
-			      sense, timeout, retries, 0);
-
-	/* 
-	 * If there was an error condition, pass the info back to the user. 
-	 */
-	if (result) {
-		int sb_len = sizeof(*sense);
-
-		sb_len = (sb_len > OMAX_SB_LEN) ? OMAX_SB_LEN : sb_len;
-		if (copy_to_user(cmd_in, sense, sb_len))
-			result = -EFAULT;
-	} else {
-		if (outlen && copy_to_user(cmd_in, buf, outlen))
-			result = -EFAULT;
-	}	
-
-error:
-	kfree(buf);
-	return result;
-}
-EXPORT_SYMBOL(scsi_ioctl_send_command);
-
-/*
  * The scsi_ioctl_get_pci() function places into arg the value
  * pci_dev::slot_name (8 characters) for the PCI device (if any).
  * Returns: 0 on success
@@ -409,7 +235,7 @@ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
 	case SCSI_IOCTL_SEND_COMMAND:
 		if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
 			return -EACCES;
-		return scsi_ioctl_send_command(sdev, arg);
+		return sg_scsi_ioctl(NULL, sdev->request_queue, NULL, arg);
 	case SCSI_IOCTL_DOORLOCK:
 		return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
 	case SCSI_IOCTL_DOORUNLOCK: