aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/53c7xx.c8
-rw-r--r--drivers/scsi/NCR53C9x.c2
-rw-r--r--drivers/scsi/NCR_D700.c14
-rw-r--r--drivers/scsi/aha152x.c43
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.c21
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_osm.c1
-rw-r--r--drivers/scsi/atari_NCR5380.c2
-rw-r--r--drivers/scsi/constants.c126
-rw-r--r--drivers/scsi/esp.c4
-rw-r--r--drivers/scsi/ibmvscsi/iseries_vscsi.c2
-rw-r--r--drivers/scsi/ibmvscsi/rpa_vscsi.c1
-rw-r--r--drivers/scsi/jazz_esp.c2
-rw-r--r--drivers/scsi/lpfc/lpfc.h9
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c89
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c65
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c59
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c5
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c11
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c64
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c55
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h2
-rw-r--r--drivers/scsi/mac53c94.c2
-rw-r--r--drivers/scsi/mesh.c2
-rw-r--r--drivers/scsi/pluto.c2
-rw-r--r--drivers/scsi/qlogicpti.c4
-rw-r--r--drivers/scsi/scsi.c11
-rw-r--r--drivers/scsi/scsi_debug.c72
-rw-r--r--drivers/scsi/scsi_error.c210
-rw-r--r--drivers/scsi/scsi_lib.c88
-rw-r--r--drivers/scsi/scsi_priv.h1
-rw-r--r--drivers/scsi/scsi_transport_sas.c64
-rw-r--r--drivers/scsi/sd.c3
-rw-r--r--drivers/scsi/seagate.c2
-rw-r--r--drivers/scsi/sr.c5
-rw-r--r--drivers/scsi/st.c7
-rw-r--r--drivers/scsi/sun3_NCR5380.c2
-rw-r--r--drivers/scsi/sun3x_esp.c2
-rw-r--r--drivers/scsi/wd33c93.c2
42 files changed, 573 insertions, 500 deletions
diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index c690c2b89e41..acf292736b4e 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -3451,12 +3451,12 @@ create_cmd (Scsi_Cmnd *cmd) {
for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4,
cmd_dataout += 4, ++i) {
u32 vbuf = cmd->use_sg
- ? (u32)page_address(((struct scatterlist *)cmd->buffer)[i].page)+
- ((struct scatterlist *)cmd->buffer)[i].offset
+ ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+
+ ((struct scatterlist *)cmd->request_buffer)[i].offset
: (u32)(cmd->request_buffer);
u32 bbuf = virt_to_bus((void *)vbuf);
u32 count = cmd->use_sg ?
- ((struct scatterlist *)cmd->buffer)[i].length :
+ ((struct scatterlist *)cmd->request_buffer)[i].length :
cmd->request_bufflen;
/*
@@ -5417,7 +5417,7 @@ insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) {
if ((buffers = cmd->use_sg)) {
for (offset = 0,
- segment = (struct scatterlist *) cmd->buffer;
+ segment = (struct scatterlist *) cmd->request_buffer;
buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) &&
(ptr < ((char *)page_address(segment->page)+segment->offset+segment->length)))));
--buffers, offset += segment->length, ++segment)
diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c
index 8a4659e94105..085db4826e0e 100644
--- a/drivers/scsi/NCR53C9x.c
+++ b/drivers/scsi/NCR53C9x.c
@@ -911,7 +911,7 @@ static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp)
sp->SCp.ptr =
(char *) virt_to_phys(sp->request_buffer);
} else {
- sp->SCp.buffer = (struct scatterlist *) sp->buffer;
+ sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
sp->SCp.buffers_residual = sp->use_sg - 1;
sp->SCp.this_residual = sp->SCp.buffer->length;
if (esp->dma_mmu_get_scsi_sgl)
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index a06f547e87f7..d05681f9d81a 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -114,7 +114,7 @@ MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
MODULE_LICENSE("GPL");
module_param(NCR_D700, charp, 0);
-static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
+static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
#ifdef MODULE
@@ -173,7 +173,7 @@ struct NCR_D700_private {
char pad;
};
-static int
+static int __devinit
NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
int slot, u32 region, int differential)
{
@@ -243,7 +243,7 @@ NCR_D700_intr(int irq, void *data, struct pt_regs *regs)
* essentially connectecd to the MCA bus independently, it is easier
* to set them up as two separate host adapters, rather than one
* adapter with two channels */
-static int
+static int __devinit
NCR_D700_probe(struct device *dev)
{
struct NCR_D700_private *p;
@@ -329,7 +329,7 @@ NCR_D700_probe(struct device *dev)
for (i = 0; i < 2; i++) {
int err;
- if ((err = NCR_D700_probe_one(p, i, slot, irq,
+ if ((err = NCR_D700_probe_one(p, i, irq, slot,
offset_addr + (0x80 * i),
differential)) != 0)
printk("D700: SIOP%d: probe failed, error = %d\n",
@@ -349,7 +349,7 @@ NCR_D700_probe(struct device *dev)
return 0;
}
-static void
+static void __devexit
NCR_D700_remove_one(struct Scsi_Host *host)
{
scsi_remove_host(host);
@@ -359,7 +359,7 @@ NCR_D700_remove_one(struct Scsi_Host *host)
release_region(host->base, 64);
}
-static int
+static int __devexit
NCR_D700_remove(struct device *dev)
{
struct NCR_D700_private *p = dev_get_drvdata(dev);
@@ -380,7 +380,7 @@ static struct mca_driver NCR_D700_driver = {
.name = "NCR_D700",
.bus = &mca_bus_type,
.probe = NCR_D700_probe,
- .remove = NCR_D700_remove,
+ .remove = __devexit_p(NCR_D700_remove),
},
};
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 36e63f82d9f8..f974869ea323 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -551,6 +551,11 @@ struct aha152x_hostdata {
struct aha152x_scdata {
Scsi_Cmnd *next; /* next sc in queue */
struct semaphore *sem; /* semaphore to block on */
+ unsigned char cmd_len;
+ unsigned char cmnd[MAX_COMMAND_SIZE];
+ unsigned short use_sg;
+ unsigned request_bufflen;
+ void *request_buffer;
};
@@ -1006,11 +1011,20 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p
return FAILED;
}
} else {
+ struct aha152x_scdata *sc;
+
SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
if(SCpnt->host_scribble==0) {
printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt));
return FAILED;
}
+
+ sc = SCDATA(SCpnt);
+ memcpy(sc->cmnd, SCpnt->cmnd, sizeof(sc->cmnd));
+ sc->request_buffer = SCpnt->request_buffer;
+ sc->request_bufflen = SCpnt->request_bufflen;
+ sc->use_sg = SCpnt->use_sg;
+ sc->cmd_len = SCpnt->cmd_len;
}
SCNEXT(SCpnt) = NULL;
@@ -1165,6 +1179,10 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
DECLARE_MUTEX_LOCKED(sem);
struct timer_list timer;
int ret, issued, disconnected;
+ unsigned char old_cmd_len = SCpnt->cmd_len;
+ unsigned short old_use_sg = SCpnt->use_sg;
+ void *old_buffer = SCpnt->request_buffer;
+ unsigned old_bufflen = SCpnt->request_bufflen;
unsigned long flags;
#if defined(AHA152X_DEBUG)
@@ -1198,11 +1216,11 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
add_timer(&timer);
down(&sem);
del_timer(&timer);
-
- SCpnt->cmd_len = SCpnt->old_cmd_len;
- SCpnt->use_sg = SCpnt->old_use_sg;
- SCpnt->request_buffer = SCpnt->buffer;
- SCpnt->request_bufflen = SCpnt->bufflen;
+
+ SCpnt->cmd_len = old_cmd_len;
+ SCpnt->use_sg = old_use_sg;
+ SCpnt->request_buffer = old_buffer;
+ SCpnt->request_bufflen = old_bufflen;
DO_LOCK(flags);
@@ -1565,6 +1583,9 @@ static void busfree_run(struct Scsi_Host *shpnt)
#endif
if(DONE_SC->SCp.phase & check_condition) {
+ struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC;
+ struct aha152x_scdata *sc = SCDATA(cmd);
+
#if 0
if(HOSTDATA(shpnt)->debug & debug_eh) {
printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
@@ -1573,13 +1594,13 @@ static void busfree_run(struct Scsi_Host *shpnt)
#endif
/* restore old command */
- memcpy((void *) DONE_SC->cmnd, (void *) DONE_SC->data_cmnd, sizeof(DONE_SC->data_cmnd));
- DONE_SC->request_buffer = DONE_SC->buffer;
- DONE_SC->request_bufflen = DONE_SC->bufflen;
- DONE_SC->use_sg = DONE_SC->old_use_sg;
- DONE_SC->cmd_len = DONE_SC->old_cmd_len;
+ memcpy(cmd->cmnd, sc->cmnd, sizeof(sc->cmnd));
+ cmd->request_buffer = sc->request_buffer;
+ cmd->request_bufflen = sc->request_bufflen;
+ cmd->use_sg = sc->use_sg;
+ cmd->cmd_len = sc->cmd_len;
- DONE_SC->SCp.Status = 0x02;
+ cmd->SCp.Status = 0x02;
HOSTDATA(shpnt)->commands--;
if (!HOSTDATA(shpnt)->commands)
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index a1e8ca758594..653818d2f802 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -7289,7 +7289,7 @@ ahd_reset_cmds_pending(struct ahd_softc *ahd)
ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
}
-void
+static void
ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
{
cam_status ostat;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index b244c7124179..998999c0a972 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -243,25 +243,6 @@ ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
static uint32_t aic79xx_no_reset;
/*
- * Certain PCI motherboards will scan PCI devices from highest to lowest,
- * others scan from lowest to highest, and they tend to do all kinds of
- * strange things when they come into contact with PCI bridge chips. The
- * net result of all this is that the PCI card that is actually used to boot
- * the machine is very hard to detect. Most motherboards go from lowest
- * PCI slot number to highest, and the first SCSI controller found is the
- * one you boot from. The only exceptions to this are when a controller
- * has its BIOS disabled. So, we by default sort all of our SCSI controllers
- * from lowest PCI slot number to highest PCI slot number. We also force
- * all controllers with their BIOS disabled to the end of the list. This
- * works on *almost* all computers. Where it doesn't work, we have this
- * option. Setting this option to non-0 will reverse the order of the sort
- * to highest first, then lowest, but will still leave cards with their BIOS
- * disabled at the very end. That should fix everyone up unless there are
- * really strange cirumstances.
- */
-static uint32_t aic79xx_reverse_scan;
-
-/*
* Should we force EXTENDED translation on a controller.
* 0 == Use whatever is in the SEEPROM or default to off
* 1 == Use whatever is in the SEEPROM or default to on
@@ -350,7 +331,6 @@ MODULE_PARM_DESC(aic79xx,
" periodically to prevent tag starvation.\n"
" This may be required by some older disk\n"
" or drives/RAID arrays.\n"
-" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n"
" tag_info:<tag_str> Set per-target tag depth\n"
" global_tag_depth:<int> Global tag depth for all targets on all buses\n"
" slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
@@ -1031,7 +1011,6 @@ aic79xx_setup(char *s)
#ifdef AHD_DEBUG
{ "debug", &ahd_debug },
#endif
- { "reverse_scan", &aic79xx_reverse_scan },
{ "periodic_otag", &aic79xx_periodic_otag },
{ "pci_parity", &aic79xx_pci_parity },
{ "seltime", &aic79xx_seltime },
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index debf3e2a0798..aa4be8a31415 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -353,7 +353,6 @@ MODULE_PARM_DESC(aic7xxx,
" periodically to prevent tag starvation.\n"
" This may be required by some older disk\n"
" drives or RAID arrays.\n"
-" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n"
" tag_info:<tag_str> Set per-target tag depth\n"
" global_tag_depth:<int> Global tag depth for every target\n"
" on every bus\n"
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 007a14e5c3fd..e397129c90d1 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -507,7 +507,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd)
*/
if (cmd->use_sg) {
- cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+ cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
cmd->SCp.buffers_residual = cmd->use_sg - 1;
cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+
cmd->SCp.buffer->offset;
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index dddd2acce76f..61f6024b61ba 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -5,6 +5,7 @@
* Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
* by D. Gilbert and aeb (20020609)
* Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
+ * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702
*/
#include <linux/blkdev.h>
@@ -36,55 +37,56 @@ static const char * cdb_byte0_names[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
"Reasssign Blocks",
-/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL,
+/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
-/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)",
- "Reserve (6)",
-/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)",
+/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
+ "Reserve(6)",
+/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
/* 20-22 */ NULL, NULL, NULL,
/* 23-28 */ "Read Format Capacities", "Set Window",
- "Read Capacity (10)", NULL, NULL, "Read (10)",
-/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)",
- "Read updated block",
-/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal",
+ "Read Capacity(10)", NULL, NULL, "Read(10)",
+/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
+ "Read updated block",
+/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
-/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)",
+/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
"Read Defect Data(10)",
/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
"Read Buffer",
-/* 3d-3f */ "Update Block", "Read Long (10)", "Write Long (10)",
-/* 40-41 */ "Change Definition", "Write Same (10)",
+/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
+/* 40-41 */ "Change Definition", "Write Same(10)",
/* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
- "Play audio (10)", "Get configuration", "Play audio msf",
+ "Play audio(10)", "Get configuration", "Play audio msf",
"Play audio track/index",
-/* 49-4f */ "Play track relative (10)", "Get event status notification",
+/* 49-4f */ "Play track relative(10)", "Get event status notification",
"Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
NULL,
/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
- "Reserve track", "Send OPC info", "Mode Select (10)",
-/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue",
- "Mode Sense (10)", "Close track/session",
+ "Reserve track", "Send OPC info", "Mode Select(10)",
+/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
+ "Mode Sense(10)", "Close track/session",
/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
"Persistent reserve out",
/* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
-/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
"Receive copy results",
-/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out",
- "Read (16)", "Memory Export Out (16)",
-/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes",
- "Write and verify (16)", "Verify (16)",
-/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)",
- "Lock/unlock cache (16)", "Write same (16)", NULL,
+/* 85-89 */ "ATA command pass through(16)", "Access control in",
+ "Access control out", "Read(16)", "Memory Export Out(16)",
+/* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes",
+ "Write and verify(16)", "Verify(16)",
+/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
+ "Lock/unlock cache(16)", "Write same(16)", NULL,
/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
-/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)",
- "Service action out (16)",
-/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in",
- "Maintenance out", "Move medium/play audio(12)",
+/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
+ "Service action out(16)",
+/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
+ "Security protocol in", "Maintenance in", "Maintenance out",
+ "Move medium/play audio(12)",
/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
"Play track relative(12)",
/* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
@@ -92,12 +94,12 @@ static const char * cdb_byte0_names[] = {
/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
/* b2-b4 */ "Search data low(12)", "Set limits(12)",
"Read element status attached",
-/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming",
+/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
/* ba-bc */ "Redundancy group (in), Scan",
- "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd",
-/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd",
- "Volume set out, Send DVD structure",
+ "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
+/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
+ "Volume set (out), Send DVD structure",
};
struct value_name_pair {
@@ -112,6 +114,7 @@ static const struct value_name_pair maint_in_arr[] = {
{0xc, "Report supported operation codes"},
{0xd, "Report supported task management functions"},
{0xe, "Report priority"},
+ {0xf, "Report timestamp"},
};
#define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
@@ -120,6 +123,7 @@ static const struct value_name_pair maint_out_arr[] = {
{0xa, "Set target port groups"},
{0xb, "Change aliases"},
{0xe, "Set priority"},
+ {0xe, "Set timestamp"},
};
#define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
@@ -427,6 +431,7 @@ static struct error_info additional[] =
{0x001A, "Rewind operation in progress"},
{0x001B, "Set capacity operation in progress"},
{0x001C, "Verify operation in progress"},
+ {0x001D, "ATA pass through information available"},
{0x0100, "No index/sector signal"},
@@ -438,7 +443,7 @@ static struct error_info additional[] =
{0x0400, "Logical unit not ready, cause not reportable"},
{0x0401, "Logical unit is in process of becoming ready"},
- {0x0402, "Logical unit not ready, initializing cmd. required"},
+ {0x0402, "Logical unit not ready, initializing command required"},
{0x0403, "Logical unit not ready, manual intervention required"},
{0x0404, "Logical unit not ready, format in progress"},
{0x0405, "Logical unit not ready, rebuild in progress"},
@@ -478,6 +483,9 @@ static struct error_info additional[] =
{0x0B00, "Warning"},
{0x0B01, "Warning - specified temperature exceeded"},
{0x0B02, "Warning - enclosure degraded"},
+ {0x0B03, "Warning - background self-test failed"},
+ {0x0B04, "Warning - background pre-scan detected medium error"},
+ {0x0B05, "Warning - background medium scan detected medium error"},
{0x0C00, "Write error"},
{0x0C01, "Write error - recovered with auto reallocation"},
@@ -493,6 +501,7 @@ static struct error_info additional[] =
{0x0C0B, "Auxiliary memory write error"},
{0x0C0C, "Write error - unexpected unsolicited data"},
{0x0C0D, "Write error - not enough unsolicited data"},
+ {0x0C0F, "Defects in error window"},
{0x0D00, "Error detected by third party temporary initiator"},
{0x0D01, "Third party device failure"},
@@ -504,11 +513,12 @@ static struct error_info additional[] =
{0x0E00, "Invalid information unit"},
{0x0E01, "Information unit too short"},
{0x0E02, "Information unit too long"},
+ {0x0E03, "Invalid field in command information unit"},
{0x1000, "Id CRC or ECC error"},
- {0x1001, "Data block guard check failed"},
- {0x1002, "Data block application tag check failed"},
- {0x1003, "Data block reference tag check failed"},
+ {0x1001, "Logical block guard check failed"},
+ {0x1002, "Logical block application tag check failed"},
+ {0x1003, "Logical block reference tag check failed"},
{0x1100, "Unrecovered read error"},
{0x1101, "Read retries exhausted"},
@@ -530,6 +540,7 @@ static struct error_info additional[] =
{0x1111, "Read error - loss of streaming"},
{0x1112, "Auxiliary memory read error"},
{0x1113, "Read error - failed retransmission request"},
+ {0x1114, "Read error - lba marked bad by application client"},
{0x1200, "Address mark not found for id field"},
@@ -610,11 +621,14 @@ static struct error_info additional[] =
{0x2100, "Logical block address out of range"},
{0x2101, "Invalid element address"},
{0x2102, "Invalid address for write"},
+ {0x2103, "Invalid write crossing layer jump"},
{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
{0x2400, "Invalid field in cdb"},
{0x2401, "CDB decryption error"},
+ {0x2402, "Obsolete"},
+ {0x2403, "Obsolete"},
{0x2404, "Security audit value frozen"},
{0x2405, "Security working key frozen"},
{0x2406, "Nonce not unique"},
@@ -637,7 +651,10 @@ static struct error_info additional[] =
{0x260C, "Invalid operation for copy source or destination"},
{0x260D, "Copy segment granularity violation"},
{0x260E, "Invalid parameter while port is enabled"},
- {0x260F, "Invalid data-out buffer integrity"},
+ {0x260F, "Invalid data-out buffer integrity check value"},
+ {0x2610, "Data decryption key fail limit reached"},
+ {0x2611, "Incomplete key-associated data set"},
+ {0x2612, "Vendor specific key reference not found"},
{0x2700, "Write protected"},
{0x2701, "Hardware write protected"},
@@ -649,6 +666,7 @@ static struct error_info additional[] =
{0x2800, "Not ready to ready change, medium may have changed"},
{0x2801, "Import or export element accessed"},
+ {0x2802, "Format-layer may have changed"},
{0x2900, "Power on, reset, or bus device reset occurred"},
{0x2901, "Power on occurred"},
@@ -669,6 +687,11 @@ static struct error_info additional[] =
{0x2A07, "Implicit asymmetric access state transition failed"},
{0x2A08, "Priority changed"},
{0x2A09, "Capacity data has changed"},
+ {0x2A10, "Timestamp changed"},
+ {0x2A11, "Data encryption parameters changed by another i_t nexus"},
+ {0x2A12, "Data encryption parameters changed by vendor specific "
+ "event"},
+ {0x2A13, "Data encryption key instance counter has changed"},
{0x2B00, "Copy cannot execute since host cannot disconnect"},
@@ -690,6 +713,7 @@ static struct error_info additional[] =
{0x2E00, "Insufficient time for operation"},
{0x2F00, "Commands cleared by another initiator"},
+ {0x2F01, "Commands cleared by power loss notification"},
{0x3000, "Incompatible medium installed"},
{0x3001, "Cannot read medium - unknown format"},
@@ -702,7 +726,8 @@ static struct error_info additional[] =
{0x3008, "Cannot write - application code mismatch"},
{0x3009, "Current session not fixated for append"},
{0x300A, "Cleaning request rejected"},
- {0x300C, "WORM medium, overwrite attempted"},
+ {0x300C, "WORM medium - overwrite attempted"},
+ {0x300D, "WORM medium - integrity check"},
{0x3010, "Medium not formatted"},
{0x3100, "Medium format corrupted"},
@@ -790,6 +815,9 @@ static struct error_info additional[] =
{0x3F0F, "Echo buffer overwritten"},
{0x3F10, "Medium loadable"},
{0x3F11, "Medium auxiliary memory accessible"},
+ {0x3F12, "iSCSI IP address added"},
+ {0x3F13, "iSCSI IP address removed"},
+ {0x3F14, "iSCSI IP address changed"},
/*
* {0x40NN, "Ram failure"},
* {0x40NN, "Diagnostic failure on component nn"},
@@ -799,6 +827,7 @@ static struct error_info additional[] =
{0x4300, "Message error"},
{0x4400, "Internal target failure"},
+ {0x4471, "ATA device failed set features"},
{0x4500, "Select or reselect failure"},
@@ -807,9 +836,10 @@ static struct error_info additional[] =
{0x4700, "Scsi parity error"},
{0x4701, "Data phase CRC error detected"},
{0x4702, "Scsi parity error detected during st data phase"},
- {0x4703, "Information unit CRC error detected"},
+ {0x4703, "Information unit iuCRC error detected"},
{0x4704, "Asynchronous information protection error detected"},
{0x4705, "Protocol service CRC error"},
+ {0x4706, "Phy test function in progress"},
{0x477f, "Some commands cleared by iSCSI Protocol event"},
{0x4800, "Initiator detected error message received"},
@@ -844,6 +874,8 @@ static struct error_info additional[] =
{0x5300, "Media load or eject failed"},
{0x5301, "Unload tape failure"},
{0x5302, "Medium removal prevented"},
+ {0x5303, "Medium removal prevented by data transfer element"},
+ {0x5304, "Medium thread or unthread failure"},
{0x5400, "Scsi to host system interface failure"},
@@ -855,6 +887,7 @@ static struct error_info additional[] =
{0x5505, "Insufficient access control resources"},
{0x5506, "Auxiliary memory out of space"},
{0x5507, "Quota error"},
+ {0x5508, "Maximum number of supplemental decryption keys exceeded"},
{0x5700, "Unable to recover table-of-contents"},
@@ -1004,6 +1037,7 @@ static struct error_info additional[] =
{0x6708, "Assign failure occurred"},
{0x6709, "Multiply assigned logical unit"},
{0x670A, "Set target port groups command failed"},
+ {0x670B, "ATA device feature not enabled"},
{0x6800, "Logical unit not configured"},
@@ -1030,6 +1064,8 @@ static struct error_info additional[] =
{0x6F03, "Read of scrambled sector without authentication"},
{0x6F04, "Media region code is mismatched to logical unit region"},
{0x6F05, "Drive region must be permanent/region reset count error"},
+ {0x6F06, "Insufficient block count for binding nonce recording"},
+ {0x6F07, "Conflict in binding nonce recording"},
/*
* {0x70NN, "Decompression exception short algorithm id of nn"},
*/
@@ -1041,6 +1077,8 @@ static struct error_info additional[] =
{0x7203, "Session fixation error - incomplete track in session"},
{0x7204, "Empty or partially written reserved track"},
{0x7205, "No more track reservations allowed"},
+ {0x7206, "RMZ extension is not allowed"},
+ {0x7207, "No more test zone extensions are allowed"},
{0x7300, "Cd control error"},
{0x7301, "Power calibration area almost full"},
@@ -1049,6 +1087,18 @@ static struct error_info additional[] =
{0x7304, "Program memory area update failure"},
{0x7305, "Program memory area is full"},
{0x7306, "RMA/PMA is almost full"},
+ {0x7310, "Current power calibration area almost full"},
+ {0x7311, "Current power calibration area is full"},
+ {0x7317, "RDZ is full"},
+
+ {0x7400, "Security error"},
+ {0x7401, "Unable to decrypt data"},
+ {0x7402, "Unencrypted data encountered while decrypting"},
+ {0x7403, "Incorrect data encryption key"},
+ {0x7404, "Cryptographic integrity validation failed"},
+ {0x7405, "Error decrypting data"},
+ {0x7471, "Logical unit access not authorized"},
+
{0, NULL}
};
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
index 10573c24a50b..eaf64c7e54e7 100644
--- a/drivers/scsi/esp.c
+++ b/drivers/scsi/esp.c
@@ -1397,7 +1397,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
sp->SCp.ptr = NULL;
}
} else {
- sp->SCp.buffer = (struct scatterlist *) sp->buffer;
+ sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
sp->SCp.buffers_residual = sbus_map_sg(esp->sdev,
sp->SCp.buffer,
sp->use_sg,
@@ -1410,7 +1410,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp)
{
if (sp->use_sg) {
- sbus_unmap_sg(esp->sdev, sp->buffer, sp->use_sg,
+ sbus_unmap_sg(esp->sdev, sp->request_buffer, sp->use_sg,
sp->sc_data_direction);
} else if (sp->request_bufflen) {
sbus_unmap_single(esp->sdev,
diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c
index 7eed0b098171..6aeb5f003c3c 100644
--- a/drivers/scsi/ibmvscsi/iseries_vscsi.c
+++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c
@@ -81,7 +81,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
int rc;
single_host_data = hostdata;
- rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, 0);
+ rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, max_requests);
if (rc < 0) {
printk("viopath_open failed with rc %d in open_event_path\n",
rc);
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 242b8873b333..ed22b96580c6 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -238,6 +238,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
if (rc == 2) {
/* Adapter is good, but other end is not ready */
printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n");
+ retrc = 0;
} else if (rc != 0) {
printk(KERN_WARNING "ibmvscsi: Error %d opening adapter\n", rc);
goto reg_crq_failed;
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 3fd8a96f2af3..bfac4441d89f 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -257,7 +257,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp)
static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp)
{
int sz = sp->use_sg - 1;
- struct scatterlist *sg = (struct scatterlist *)sp->buffer;
+ struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
while(sz >= 0) {
vdma_free(sg[sz].dma_address);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index f81691fcf177..d44f9aac6b8f 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -21,10 +21,12 @@
struct lpfc_sli2_slim;
-#define LPFC_MAX_TARGET 256 /* max targets supported */
-#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els req */
-#define LPFC_MAX_NS_RETRY 3 /* max NameServer retries */
+#define LPFC_MAX_TARGET 256 /* max number of targets supported */
+#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
+ requests */
+#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
+ the NameServer before giving up. */
#define LPFC_DFT_HBA_Q_DEPTH 2048 /* max cmds per hba */
#define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */
#define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */
@@ -41,7 +43,6 @@ struct lpfc_sli2_slim;
(( (u64)(high)<<16 ) << 16)|( (u64)(low))))
/* Provide maximum configuration definitions. */
#define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
-#define MAX_FCP_TARGET 256 /* max num of FCP targets supported */
#define FC_MAX_ADPTMSG 64
#define MAX_HBAEVT 32
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index b62a72dfab29..5c68cdd8736f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -219,9 +219,19 @@ lpfc_issue_lip(struct Scsi_Host *host)
return -ENOMEM;
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- lpfc_init_link(phba, pmboxq, phba->cfg_topology, phba->cfg_link_speed);
+ pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
+ pmboxq->mb.mbxOwner = OWN_HOST;
+
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+ if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+ memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
+ lpfc_init_link(phba, pmboxq, phba->cfg_topology,
+ phba->cfg_link_speed);
+ mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,
+ phba->fc_ratov * 2);
+ }
+
if (mbxstatus == MBX_TIMEOUT)
pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
else
@@ -233,51 +243,53 @@ lpfc_issue_lip(struct Scsi_Host *host)
return 0;
}
-static ssize_t
-lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf)
+static int
+lpfc_selective_reset(struct lpfc_hba *phba)
{
- struct Scsi_Host *host = class_to_shost(cdev);
- struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
- return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
+ struct completion online_compl;
+ int status = 0;
+
+ init_completion(&online_compl);
+ lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_OFFLINE);
+ wait_for_completion(&online_compl);
+
+ if (status != 0)
+ return -EIO;
+
+ init_completion(&online_compl);
+ lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_ONLINE);
+ wait_for_completion(&online_compl);
+
+ if (status != 0)
+ return -EIO;
+
+ return 0;
}
static ssize_t
-lpfc_board_online_show(struct class_device *cdev, char *buf)
+lpfc_issue_reset(struct class_device *cdev, const char *buf, size_t count)
{
struct Scsi_Host *host = class_to_shost(cdev);
struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ int status = -EINVAL;
- if (phba->fc_flag & FC_OFFLINE_MODE)
- return snprintf(buf, PAGE_SIZE, "0\n");
+ if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
+ status = lpfc_selective_reset(phba);
+
+ if (status == 0)
+ return strlen(buf);
else
- return snprintf(buf, PAGE_SIZE, "1\n");
+ return status;
}
static ssize_t
-lpfc_board_online_store(struct class_device *cdev, const char *buf,
- size_t count)
+lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf)
{
struct Scsi_Host *host = class_to_shost(cdev);
struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
- struct completion online_compl;
- int val=0, status=0;
-
- if (sscanf(buf, "%d", &val) != 1)
- return -EINVAL;
-
- init_completion(&online_compl);
-
- if (val)
- lpfc_workq_post_event(phba, &status, &online_compl,
- LPFC_EVT_ONLINE);
- else
- lpfc_workq_post_event(phba, &status, &online_compl,
- LPFC_EVT_OFFLINE);
- wait_for_completion(&online_compl);
- if (!status)
- return strlen(buf);
- else
- return -EIO;
+ return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
}
static ssize_t
@@ -532,10 +544,9 @@ static CLASS_DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show,
NULL);
static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show,
NULL);
-static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR,
- lpfc_board_online_show, lpfc_board_online_store);
static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
lpfc_board_mode_show, lpfc_board_mode_store);
+static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
static int lpfc_poll = 0;
module_param(lpfc_poll, int, 0);
@@ -695,12 +706,12 @@ LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
"during discovery");
/*
-# lpfc_max_luns: maximum number of LUNs per target driver will support
-# Value range is [1,32768]. Default value is 256.
-# NOTE: The SCSI layer will scan each target for this many luns
+# lpfc_max_luns: maximum allowed LUN.
+# Value range is [0,65535]. Default value is 255.
+# NOTE: The SCSI layer might probe all allowed LUN on some old targets.
*/
-LPFC_ATTR_R(max_luns, 256, 1, 32768,
- "Maximum number of LUNs per target driver will support");
+LPFC_ATTR_R(max_luns, 255, 0, 65535,
+ "Maximum allowed LUN");
/*
# lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.
@@ -739,8 +750,8 @@ struct class_device_attribute *lpfc_host_attrs[] = {
&class_device_attr_lpfc_max_luns,
&class_device_attr_nport_evt_cnt,
&class_device_attr_management_version,
- &class_device_attr_board_online,
&class_device_attr_board_mode,
+ &class_device_attr_issue_reset,
&class_device_attr_lpfc_poll,
&class_device_attr_lpfc_poll_tmo,
NULL,
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index ee22173fce43..517e9e4dd461 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -147,6 +147,7 @@ int lpfc_sli_hba_setup(struct lpfc_hba *);
int lpfc_sli_hba_down(struct lpfc_hba *);
int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
int lpfc_sli_handle_mb_event(struct lpfc_hba *);
+int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
struct lpfc_sli_ring *, uint32_t);
void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4126fd87956f..b89f6cb641e6 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -648,33 +648,32 @@ lpfc_more_plogi(struct lpfc_hba * phba)
}
static struct lpfc_nodelist *
-lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
+lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_dmabuf *prsp,
struct lpfc_nodelist *ndlp)
{
struct lpfc_nodelist *new_ndlp;
- struct lpfc_dmabuf *pcmd, *prsp;
uint32_t *lp;
struct serv_parm *sp;
uint8_t name[sizeof (struct lpfc_name)];
uint32_t rc;
- pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
- prsp = (struct lpfc_dmabuf *) pcmd->list.next;
lp = (uint32_t *) prsp->virt;
sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t));
+ memset(name, 0, sizeof (struct lpfc_name));
/* Now we to find out if the NPort we are logging into, matches the WWPN
* we have for that ndlp. If not, we have some work to do.
*/
new_ndlp = lpfc_findnode_wwpn(phba, NLP_SEARCH_ALL, &sp->portName);
- memset(name, 0, sizeof (struct lpfc_name));
- rc = memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name));
- if (!rc || (new_ndlp == ndlp)) {
+ if (new_ndlp == ndlp)
return ndlp;
- }
if (!new_ndlp) {
+ rc =
+ memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name));
+ if (!rc)
+ return ndlp;
new_ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_ATOMIC);
if (!new_ndlp)
return ndlp;
@@ -683,17 +682,21 @@ lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
}
lpfc_unreg_rpi(phba, new_ndlp);
- new_ndlp->nlp_prev_state = ndlp->nlp_state;
new_ndlp->nlp_DID = ndlp->nlp_DID;
- new_ndlp->nlp_state = NLP_STE_PLOGI_ISSUE;
- lpfc_nlp_list(phba, new_ndlp, NLP_PLOGI_LIST);
+ new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
+ new_ndlp->nlp_state = ndlp->nlp_state;
+ lpfc_nlp_list(phba, new_ndlp, ndlp->nlp_flag & NLP_LIST_MASK);
/* Move this back to NPR list */
- lpfc_unreg_rpi(phba, ndlp);
- ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */
- ndlp->nlp_state = NLP_STE_NPR_NODE;
- lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
-
+ if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ }
+ else {
+ lpfc_unreg_rpi(phba, ndlp);
+ ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */
+ ndlp->nlp_state = NLP_STE_NPR_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
+ }
return new_ndlp;
}
@@ -703,6 +706,7 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
{
IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
+ struct lpfc_dmabuf *prsp;
int disc, rc, did, type;
@@ -769,7 +773,10 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
}
} else {
/* Good status, call state machine */
- ndlp = lpfc_plogi_confirm_nport(phba, cmdiocb, ndlp);
+ prsp = list_entry(((struct lpfc_dmabuf *)
+ cmdiocb->context2)->list.next,
+ struct lpfc_dmabuf, list);
+ ndlp = lpfc_plogi_confirm_nport(phba, prsp, ndlp);
rc = lpfc_disc_state_machine(phba, ndlp, cmdiocb,
NLP_EVT_CMPL_PLOGI);
}
@@ -3282,10 +3289,9 @@ lpfc_els_timeout_handler(struct lpfc_hba *phba)
} else
lpfc_sli_release_iocbq(phba, piocb);
}
- if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt) {
- phba->els_tmofunc.expires = jiffies + HZ * timeout;
- add_timer(&phba->els_tmofunc);
- }
+ if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt)
+ mod_timer(&phba->els_tmofunc, jiffies + HZ * timeout);
+
spin_unlock_irq(phba->host->host_lock);
}
@@ -3442,6 +3448,8 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
if ((did & Fabric_DID_MASK) == Fabric_DID_MASK) {
ndlp->nlp_type |= NLP_FABRIC;
}
+ ndlp->nlp_state = NLP_STE_UNUSED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST);
}
phba->fc_stat.elsRcvFrame++;
@@ -3463,13 +3471,14 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
rjt_err = 1;
break;
}
+ ndlp = lpfc_plogi_confirm_nport(phba, mp, ndlp);
lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PLOGI);
break;
case ELS_CMD_FLOGI:
phba->fc_stat.elsRcvFLOGI++;
lpfc_els_rcv_flogi(phba, elsiocb, ndlp, newnode);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
case ELS_CMD_LOGO:
@@ -3492,7 +3501,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
phba->fc_stat.elsRcvRSCN++;
lpfc_els_rcv_rscn(phba, elsiocb, ndlp, newnode);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
case ELS_CMD_ADISC:
@@ -3535,28 +3544,28 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
phba->fc_stat.elsRcvLIRR++;
lpfc_els_rcv_lirr(phba, elsiocb, ndlp);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
case ELS_CMD_RPS:
phba->fc_stat.elsRcvRPS++;
lpfc_els_rcv_rps(phba, elsiocb, ndlp);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
case ELS_CMD_RPL:
phba->fc_stat.elsRcvRPL++;
lpfc_els_rcv_rpl(phba, elsiocb, ndlp);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
case ELS_CMD_RNID:
phba->fc_stat.elsRcvRNID++;
lpfc_els_rcv_rnid(phba, elsiocb, ndlp);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
default:
@@ -3568,7 +3577,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba,
"%d:0115 Unknown ELS command x%x received from "
"NPORT x%x\n", phba->brd_no, cmd, did);
if (newnode) {
- mempool_free( ndlp, phba->nlp_mem_pool);
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
break;
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index adb086009ae0..4d6cf990c4fc 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1084,7 +1084,7 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
fc_remote_port_rolechg(rport, rport_ids.roles);
if ((rport->scsi_target_id != -1) &&
- (rport->scsi_target_id < MAX_FCP_TARGET)) {
+ (rport->scsi_target_id < LPFC_MAX_TARGET)) {
ndlp->nlp_sid = rport->scsi_target_id;
}
@@ -1313,7 +1313,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
if ((rport_add == mapped) &&
((!nlp->rport) ||
(nlp->rport->scsi_target_id == -1) ||
- (nlp->rport->scsi_target_id >= MAX_FCP_TARGET))) {
+ (nlp->rport->scsi_target_id >= LPFC_MAX_TARGET))) {
nlp->nlp_state = NLP_STE_UNMAPPED_NODE;
spin_lock_irq(phba->host->host_lock);
nlp->nlp_flag |= NLP_TGT_NO_SCSIID;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 81755a3f7c68..ef47b824cbed 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -71,6 +71,7 @@ lpfc_config_port_prep(struct lpfc_hba * phba)
uint16_t offset = 0;
static char licensed[56] =
"key unlock for use with gnu public licensed code only\0";
+ static int init_key = 1;
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
@@ -82,10 +83,13 @@ lpfc_config_port_prep(struct lpfc_hba * phba)
phba->hba_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
- uint32_t *ptext = (uint32_t *) licensed;
+ if (init_key) {
+ uint32_t *ptext = (uint32_t *) licensed;
- for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
- *ptext = cpu_to_be32(*ptext);
+ for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
+ *ptext = cpu_to_be32(*ptext);
+ init_key = 0;
+ }
lpfc_read_nv(phba, pmb);
memset((char*)mb->un.varRDnvp.rsvd3, 0,
@@ -405,19 +409,26 @@ lpfc_config_port_post(struct lpfc_hba * phba)
}
/* MBOX buffer will be freed in mbox compl */
- i = 0;
+ return (0);
+}
+
+static int
+lpfc_discovery_wait(struct lpfc_hba *phba)
+{
+ int i = 0;
+
while ((phba->hba_state != LPFC_HBA_READY) ||
(phba->num_disc_nodes) || (phba->fc_prli_sent) ||
((phba->fc_map_cnt == 0) && (i<2)) ||
- (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
+ (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
/* Check every second for 30 retries. */
i++;
if (i > 30) {
- break;
+ return -ETIMEDOUT;
}
if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
/* The link is down. Set linkdown timeout */
- break;
+ return -ETIMEDOUT;
}
/* Delay for 1 second to give discovery time to complete. */
@@ -425,12 +436,7 @@ lpfc_config_port_post(struct lpfc_hba * phba)
}
- /* Since num_disc_nodes keys off of PLOGI, delay a bit to let
- * any potential PRLIs to flush thru the SLI sub-system.
- */
- msleep(50);
-
- return (0);
+ return 0;
}
/************************************************************************/
@@ -1339,7 +1345,8 @@ lpfc_offline(struct lpfc_hba * phba)
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
unsigned long iflag;
- int i = 0;
+ int i;
+ int cnt = 0;
if (!phba)
return 0;
@@ -1348,17 +1355,27 @@ lpfc_offline(struct lpfc_hba * phba)
return 0;
psli = &phba->sli;
- pring = &psli->ring[psli->fcp_ring];
lpfc_linkdown(phba);
+ lpfc_sli_flush_mbox_queue(phba);
- /* The linkdown event takes 30 seconds to timeout. */
- while (pring->txcmplq_cnt) {
- mdelay(10);
- if (i++ > 3000)
- break;
+ for (i = 0; i < psli->num_rings; i++) {
+ pring = &psli->ring[i];
+ /* The linkdown event takes 30 seconds to timeout. */
+ while (pring->txcmplq_cnt) {
+ mdelay(10);
+ if (cnt++ > 3000) {
+ lpfc_printf_log(phba,
+ KERN_WARNING, LOG_INIT,
+ "%d:0466 Outstanding IO when "
+ "bringing Adapter offline\n",
+ phba->brd_no);
+ break;
+ }
+ }
}
+
/* stop all timers associated with this hba */
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
@@ -1639,6 +1656,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
goto out_free_irq;
}
+ lpfc_discovery_wait(phba);
+
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(phba->host->host_lock);
lpfc_poll_start_timer(phba);
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 07017658ac56..066292d3995a 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -133,6 +133,11 @@ lpfc_mem_free(struct lpfc_hba * phba)
pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
pci_pool_destroy(phba->lpfc_mbuf_pool);
+
+ /* Free the iocb lookup array */
+ kfree(psli->iocbq_lookup);
+ psli->iocbq_lookup = NULL;
+
}
void *
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 27d60ad897cd..bd0b0e293d63 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1110,6 +1110,17 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_hba * phba,
phba->brd_no,
did, mb->mbxStatus, phba->hba_state);
+ /*
+ * If RegLogin failed due to lack of HBA resources do not
+ * retry discovery.
+ */
+ if (mb->mbxStatus == MBXERR_RPI_FULL) {
+ ndlp->nlp_prev_state = NLP_STE_UNUSED_NODE;
+ ndlp->nlp_state = NLP_STE_UNUSED_NODE;
+ lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST);
+ return ndlp->nlp_state;
+ }
+
/* Put ndlp in npr list set plogi timer for 1 sec */
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
spin_lock_irq(phba->host->host_lock);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index aea1ee472f3d..a760a44173df 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -153,22 +153,6 @@ static void
lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
{
unsigned long iflag = 0;
- /*
- * There are only two special cases to consider. (1) the scsi command
- * requested scatter-gather usage or (2) the scsi command allocated
- * a request buffer, but did not request use_sg. There is a third
- * case, but it does not require resource deallocation.
- */
- if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
- dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
- psb->seg_cnt, psb->pCmd->sc_data_direction);
- } else {
- if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
- dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
- psb->pCmd->request_bufflen,
- psb->pCmd->sc_data_direction);
- }
- }
spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
psb->pCmd = NULL;
@@ -282,6 +266,27 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd)
}
static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+{
+ /*
+ * There are only two special cases to consider. (1) the scsi command
+ * requested scatter-gather usage or (2) the scsi command allocated
+ * a request buffer, but did not request use_sg. There is a third
+ * case, but it does not require resource deallocation.
+ */
+ if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) {
+ dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer,
+ psb->seg_cnt, psb->pCmd->sc_data_direction);
+ } else {
+ if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) {
+ dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys,
+ psb->pCmd->request_bufflen,
+ psb->pCmd->sc_data_direction);
+ }
+ }
+}
+
+static void
lpfc_handle_fcp_err(struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
@@ -454,6 +459,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
cmd->scsi_done(cmd);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
+ lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
@@ -511,6 +517,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
}
}
+ lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
@@ -609,6 +616,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd,
static int
lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
uint8_t task_mgmt_cmd)
{
struct lpfc_sli *psli;
@@ -627,8 +635,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
piocb = &piocbq->iocb;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
- int_to_scsilun(lpfc_cmd->pCmd->device->lun,
- &lpfc_cmd->fcp_cmnd->fcp_lun);
+ int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun);
fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
@@ -655,14 +662,16 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
static int
lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba,
- unsigned tgt_id, struct lpfc_rport_data *rdata)
+ unsigned tgt_id, unsigned int lun,
+ struct lpfc_rport_data *rdata)
{
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocbqrsp;
int ret;
lpfc_cmd->rdata = rdata;
- ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
+ ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, lun,
+ FCP_TARGET_RESET);
if (!ret)
return FAILED;
@@ -822,6 +831,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
return 0;
out_host_busy_free_buf:
+ lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
lpfc_release_scsi_buf(phba, lpfc_cmd);
out_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
@@ -969,12 +979,12 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
if (lpfc_cmd == NULL)
goto out;
- lpfc_cmd->pCmd = cmnd;
lpfc_cmd->timeout = 60;
lpfc_cmd->scsi_hba = phba;
lpfc_cmd->rdata = rdata;
- ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
+ ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, cmnd->device->lun,
+ FCP_LUN_RESET);
if (!ret)
goto out_free_scsi_buf;
@@ -1001,7 +1011,6 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
cmd_status = iocbqrsp->iocb.ulpStatus;
lpfc_sli_release_iocbq(phba, iocbqrsp);
- lpfc_release_scsi_buf(phba, lpfc_cmd);
/*
* All outstanding txcmplq I/Os should have been aborted by the device.
@@ -1040,6 +1049,8 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
}
out_free_scsi_buf:
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"%d:0713 SCSI layer issued LUN reset (%d, %d) "
"Data: x%x x%x x%x\n",
@@ -1070,7 +1081,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
/* The lpfc_cmd storage is reused. Set all loop invariants. */
lpfc_cmd->timeout = 60;
- lpfc_cmd->pCmd = cmnd;
lpfc_cmd->scsi_hba = phba;
/*
@@ -1078,7 +1088,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
* targets known to the driver. Should any target reset
* fail, this routine returns failure to the midlayer.
*/
- for (i = 0; i < MAX_FCP_TARGET; i++) {
+ for (i = 0; i < LPFC_MAX_TARGET; i++) {
/* Search the mapped list for this target ID */
match = 0;
list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
@@ -1090,8 +1100,8 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
if (!match)
continue;
- ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba,
- i, ndlp->rport->dd_data);
+ ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba, i, cmnd->device->lun,
+ ndlp->rport->dd_data);
if (ret != SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
"%d:0713 Bus Reset on target %d failed\n",
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index bb69a7a1ec59..350a625fa224 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -191,35 +191,12 @@ static int
lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba,
struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb)
{
- uint16_t iotag;
-
list_add_tail(&piocb->list, &pring->txcmplq);
pring->txcmplq_cnt++;
if (unlikely(pring->ringno == LPFC_ELS_RING))
mod_timer(&phba->els_tmofunc,
jiffies + HZ * (phba->fc_ratov << 1));
- if (pring->fast_lookup) {
- /* Setup fast lookup based on iotag for completion */
- iotag = piocb->iocb.ulpIoTag;
- if (iotag && (iotag < pring->fast_iotag))
- *(pring->fast_lookup + iotag) = piocb;
- else {
-
- /* Cmd ring <ringno> put: iotag <iotag> greater then
- configured max <fast_iotag> wd0 <icmd> */
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_SLI,
- "%d:0316 Cmd ring %d put: iotag x%x "
- "greater then configured max x%x "
- "wd0 x%x\n",
- phba->brd_no,
- pring->ringno, iotag,
- pring->fast_iotag,
- *(((uint32_t *)(&piocb->iocb)) + 7));
- }
- }
return (0);
}
@@ -601,7 +578,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba * phba)
/* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus
<status> */
lpfc_printf_log(phba,
- KERN_ERR,
+ KERN_WARNING,
LOG_MBOX | LOG_SLI,
"%d:0304 Stray Mailbox Interrupt "
"mbxCommand x%x mbxStatus x%x\n",
@@ -1570,8 +1547,8 @@ lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask)
void lpfc_reset_barrier(struct lpfc_hba * phba)
{
- uint32_t * resp_buf;
- uint32_t * mbox_buf;
+ uint32_t __iomem *resp_buf;
+ uint32_t __iomem *mbox_buf;
volatile uint32_t mbox;
uint32_t hc_copy;
int i;
@@ -1587,7 +1564,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba)
* Tell the other part of the chip to suspend temporarily all
* its DMA activity.
*/
- resp_buf = (uint32_t *)phba->MBslimaddr;
+ resp_buf = phba->MBslimaddr;
/* Disable the error attention */
hc_copy = readl(phba->HCregaddr);
@@ -1605,7 +1582,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba)
((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
- mbox_buf = (uint32_t *)phba->MBslimaddr;
+ mbox_buf = phba->MBslimaddr;
writel(mbox, mbox_buf);
for (i = 0;
@@ -1805,7 +1782,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
skip_post = 0;
word0 = 0; /* This is really setting up word1 */
}
- to_slim = (uint8_t *) phba->MBslimaddr + sizeof (uint32_t);
+ to_slim = phba->MBslimaddr + sizeof (uint32_t);
writel(*(uint32_t *) mb, to_slim);
readl(to_slim); /* flush */
@@ -2659,8 +2636,6 @@ lpfc_sli_hba_down(struct lpfc_hba * phba)
INIT_LIST_HEAD(&(pring->txq));
- kfree(pring->fast_lookup);
- pring->fast_lookup = NULL;
}
spin_unlock_irqrestore(phba->host->host_lock, flags);
@@ -3110,6 +3085,24 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
return retval;
}
+int
+lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+{
+ int i = 0;
+
+ while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !phba->stopped) {
+ if (i++ > LPFC_MBOX_TMO * 1000)
+ return 1;
+
+ if (lpfc_sli_handle_mb_event(phba) == 0)
+ i = 0;
+
+ msleep(1);
+ }
+
+ return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+}
+
irqreturn_t
lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs)
{
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index a52d6c6cf083..d8ef0d2894d4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -135,8 +135,6 @@ struct lpfc_sli_ring {
uint32_t fast_iotag; /* max fastlookup based iotag */
uint32_t iotag_ctr; /* keeps track of the next iotag to use */
uint32_t iotag_max; /* max iotag value to use */
- struct lpfc_iocbq ** fast_lookup; /* array of IOCB ptrs indexed by
- iotag */
struct list_head txq;
uint16_t txq_cnt; /* current length of queue */
uint16_t txq_max; /* max length */
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 6b737568b831..10e89c6ae823 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.1.6"
+#define LPFC_DRIVER_VERSION "8.1.7"
#define LPFC_DRIVER_NAME "lpfc"
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 93edaa8696cf..89ef34df5a1d 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -378,7 +378,7 @@ static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
int nseg;
total = 0;
- scl = (struct scatterlist *) cmd->buffer;
+ scl = (struct scatterlist *) cmd->request_buffer;
nseg = pci_map_sg(state->pdev, scl, cmd->use_sg,
cmd->sc_data_direction);
for (i = 0; i < nseg; ++i) {
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index c88717727be8..5572981a9f92 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1268,7 +1268,7 @@ static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd)
if (cmd->use_sg > 0) {
int nseg;
total = 0;
- scl = (struct scatterlist *) cmd->buffer;
+ scl = (struct scatterlist *) cmd->request_buffer;
off = ms->data_ptr;
nseg = pci_map_sg(ms->pdev, scl, cmd->use_sg,
cmd->sc_data_direction);
diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c
index 7abf64d1bfc9..0bd9c60e6455 100644
--- a/drivers/scsi/pluto.c
+++ b/drivers/scsi/pluto.c
@@ -169,8 +169,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt)
SCpnt->request->rq_status = RQ_SCSI_BUSY;
SCpnt->done = pluto_detect_done;
- SCpnt->bufflen = 256;
- SCpnt->buffer = fcs[i].inquiry;
SCpnt->request_bufflen = 256;
SCpnt->request_buffer = fcs[i].inquiry;
PLD(("set up %d %08lx\n", i, (long)SCpnt))
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 69e0551a81d2..5b2f0741a55b 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -874,7 +874,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
if (Cmnd->use_sg) {
int sg_count;
- sg = (struct scatterlist *) Cmnd->buffer;
+ sg = (struct scatterlist *) Cmnd->request_buffer;
sg_count = sbus_map_sg(qpti->sdev, sg, Cmnd->use_sg, Cmnd->sc_data_direction);
ds = cmd->dataseg;
@@ -1278,7 +1278,7 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti)
if (Cmnd->use_sg) {
sbus_unmap_sg(qpti->sdev,
- (struct scatterlist *)Cmnd->buffer,
+ (struct scatterlist *)Cmnd->request_buffer,
Cmnd->use_sg,
Cmnd->sc_data_direction);
} else {
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2ab7df0dcfe8..b332caddd5b3 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -346,7 +346,7 @@ void scsi_log_send(struct scsi_cmnd *cmd)
if (level > 3) {
printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
" done = 0x%p, queuecommand 0x%p\n",
- cmd->buffer, cmd->bufflen,
+ cmd->request_buffer, cmd->request_bufflen,
cmd->done,
sdev->host->hostt->queuecommand);
@@ -661,11 +661,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
*/
int scsi_retry_command(struct scsi_cmnd *cmd)
{
- /*
- * Restore the SCSI command state.
- */
- scsi_setup_cmd_retry(cmd);
-
/*
* Zero the sense information from the last time we tried
* this command.
@@ -711,10 +706,6 @@ void scsi_finish_command(struct scsi_cmnd *cmd)
"Notifying upper driver of completion "
"(result %x)\n", cmd->result));
- /*
- * We can get here with use_sg=0, causing a panic in the upper level
- */
- cmd->use_sg = cmd->old_use_sg;
cmd->done(cmd);
}
EXPORT_SYMBOL(scsi_finish_command);
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 9c63b00773c4..a80303c6b3fd 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -286,7 +286,7 @@ static int inquiry_evpd_83(unsigned char * arr, int target_dev_id,
int dev_id_num, const char * dev_id_str,
int dev_id_str_len);
static int inquiry_evpd_88(unsigned char * arr, int target_dev_id);
-static void do_create_driverfs_files(void);
+static int do_create_driverfs_files(void);
static void do_remove_driverfs_files(void);
static int sdebug_add_adapter(void);
@@ -2487,19 +2487,22 @@ static ssize_t sdebug_add_host_store(struct device_driver * ddp,
DRIVER_ATTR(add_host, S_IRUGO | S_IWUSR, sdebug_add_host_show,
sdebug_add_host_store);
-static void do_create_driverfs_files(void)
+static int do_create_driverfs_files(void)
{
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
- driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
+ int ret;
+
+ ret = driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
+ return ret;
}
static void do_remove_driverfs_files(void)
@@ -2522,6 +2525,7 @@ static int __init scsi_debug_init(void)
unsigned int sz;
int host_to_add;
int k;
+ int ret;
if (scsi_debug_dev_size_mb < 1)
scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */
@@ -2560,12 +2564,32 @@ static int __init scsi_debug_init(void)
if (scsi_debug_num_parts > 0)
sdebug_build_parts(fake_storep);
- init_all_queued();
+ ret = device_register(&pseudo_primary);
+ if (ret < 0) {
+ printk(KERN_WARNING "scsi_debug: device_register error: %d\n",
+ ret);
+ goto free_vm;
+ }
+ ret = bus_register(&pseudo_lld_bus);
+ if (ret < 0) {
+ printk(KERN_WARNING "scsi_debug: bus_register error: %d\n",
+ ret);
+ goto dev_unreg;
+ }
+ ret = driver_register(&sdebug_driverfs_driver);
+ if (ret < 0) {
+ printk(KERN_WARNING "scsi_debug: driver_register error: %d\n",
+ ret);
+ goto bus_unreg;
+ }
+ ret = do_create_driverfs_files();
+ if (ret < 0) {
+ printk(KERN_WARNING "scsi_debug: driver_create_file error: %d\n",
+ ret);
+ goto del_files;
+ }
- device_register(&pseudo_primary);
- bus_register(&pseudo_lld_bus);
- driver_register(&sdebug_driverfs_driver);
- do_create_driverfs_files();
+ init_all_queued();
sdebug_driver_template.proc_name = (char *)sdebug_proc_name;
@@ -2585,6 +2609,18 @@ static int __init scsi_debug_init(void)
scsi_debug_add_host);
}
return 0;
+
+del_files:
+ do_remove_driverfs_files();
+ driver_unregister(&sdebug_driverfs_driver);
+bus_unreg:
+ bus_unregister(&pseudo_lld_bus);
+dev_unreg:
+ device_unregister(&pseudo_primary);
+free_vm:
+ vfree(fake_storep);
+
+ return ret;
}
static void __exit scsi_debug_exit(void)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 6683d596234a..6a5b731bd5ba 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -460,19 +460,67 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
* Return value:
* SUCCESS or FAILED or NEEDS_RETRY
**/
-static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
+static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense)
{
struct scsi_device *sdev = scmd->device;
struct Scsi_Host *shost = sdev->host;
+ int old_result = scmd->result;
DECLARE_COMPLETION(done);
unsigned long timeleft;
unsigned long flags;
+ unsigned char old_cmnd[MAX_COMMAND_SIZE];
+ enum dma_data_direction old_data_direction;
+ unsigned short old_use_sg;
+ unsigned char old_cmd_len;
+ unsigned old_bufflen;
+ void *old_buffer;
int rtn;
+ /*
+ * We need saved copies of a number of fields - this is because
+ * error handling may need to overwrite these with different values
+ * to run different commands, and once error handling is complete,
+ * we will need to restore these values prior to running the actual
+ * command.
+ */
+ old_buffer = scmd->request_buffer;
+ old_bufflen = scmd->request_bufflen;
+ memcpy(old_cmnd, scmd->cmnd, sizeof(scmd->cmnd));
+ old_data_direction = scmd->sc_data_direction;
+ old_cmd_len = scmd->cmd_len;
+ old_use_sg = scmd->use_sg;
+
+ if (copy_sense) {
+ int gfp_mask = GFP_ATOMIC;
+
+ if (shost->hostt->unchecked_isa_dma)
+ gfp_mask |= __GFP_DMA;
+
+ scmd->sc_data_direction = DMA_FROM_DEVICE;
+ scmd->request_bufflen = 252;
+ scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask);
+ if (!scmd->request_buffer)
+ return FAILED;
+ } else {
+ scmd->request_buffer = NULL;
+ scmd->request_bufflen = 0;
+ scmd->sc_data_direction = DMA_NONE;
+ }
+
+ scmd->underflow = 0;
+ scmd->use_sg = 0;
+ scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
+
if (sdev->scsi_level <= SCSI_2)
scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
(sdev->lun << 5 & 0xe0);
+ /*
+ * Zero the sense buffer. The scsi spec mandates that any
+ * untransferred sense data should be interpreted as being zero.
+ */
+ memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
+
shost->eh_action = &done;
spin_lock_irqsave(shost->host_lock, flags);
@@ -522,6 +570,29 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
rtn = FAILED;
}
+
+ /*
+ * Last chance to have valid sense data.
+ */
+ if (copy_sense) {
+ if (!SCSI_SENSE_VALID(scmd)) {
+ memcpy(scmd->sense_buffer, scmd->request_buffer,
+ sizeof(scmd->sense_buffer));
+ }
+ kfree(scmd->request_buffer);
+ }
+
+
+ /*
+ * Restore original data
+ */
+ scmd->request_buffer = old_buffer;
+ scmd->request_bufflen = old_bufflen;
+ memcpy(scmd->cmnd, old_cmnd, sizeof(scmd->cmnd));
+ scmd->sc_data_direction = old_data_direction;
+ scmd->cmd_len = old_cmd_len;
+ scmd->use_sg = old_use_sg;
+ scmd->result = old_result;
return rtn;
}
@@ -537,56 +608,10 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
static int scsi_request_sense(struct scsi_cmnd *scmd)
{
static unsigned char generic_sense[6] =
- {REQUEST_SENSE, 0, 0, 0, 252, 0};
- unsigned char *scsi_result;
- int saved_result;
- int rtn;
+ {REQUEST_SENSE, 0, 0, 0, 252, 0};
memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense));
-
- scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0));
-
-
- if (unlikely(!scsi_result)) {
- printk(KERN_ERR "%s: cannot allocate scsi_result.\n",
- __FUNCTION__);
- return FAILED;
- }
-
- /*
- * zero the sense buffer. some host adapters automatically always
- * request sense, so it is not a good idea that
- * scmd->request_buffer and scmd->sense_buffer point to the same
- * address (db). 0 is not a valid sense code.
- */
- memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
- memset(scsi_result, 0, 252);
-
- saved_result = scmd->result;
- scmd->request_buffer = scsi_result;
- scmd->request_bufflen = 252;
- scmd->use_sg = 0;
- scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
- scmd->sc_data_direction = DMA_FROM_DEVICE;
- scmd->underflow = 0;
-
- rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT);
-
- /* last chance to have valid sense data */
- if(!SCSI_SENSE_VALID(scmd)) {
- memcpy(scmd->sense_buffer, scmd->request_buffer,
- sizeof(scmd->sense_buffer));
- }
-
- kfree(scsi_result);
-
- /*
- * when we eventually call scsi_finish, we really wish to complete
- * the original request, so let's restore the original data. (db)
- */
- scsi_setup_cmd_retry(scmd);
- scmd->result = saved_result;
- return rtn;
+ return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1);
}
/**
@@ -605,12 +630,6 @@ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
{
scmd->device->host->host_failed--;
scmd->eh_eflags = 0;
-
- /*
- * set this back so that the upper level can correctly free up
- * things.
- */
- scsi_setup_cmd_retry(scmd);
list_move_tail(&scmd->eh_entry, done_q);
}
EXPORT_SYMBOL(scsi_eh_finish_cmd);
@@ -715,47 +734,26 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd)
{
static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
int retry_cnt = 1, rtn;
- int saved_result;
retry_tur:
memcpy(scmd->cmnd, tur_command, sizeof(tur_command));
- /*
- * zero the sense buffer. the scsi spec mandates that any
- * untransferred sense data should be interpreted as being zero.
- */
- memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
-
- saved_result = scmd->result;
- scmd->request_buffer = NULL;
- scmd->request_bufflen = 0;
- scmd->use_sg = 0;
- scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
- scmd->underflow = 0;
- scmd->sc_data_direction = DMA_NONE;
- rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT);
+ rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0);
- /*
- * when we eventually call scsi_finish, we really wish to complete
- * the original request, so let's restore the original data. (db)
- */
- scsi_setup_cmd_retry(scmd);
- scmd->result = saved_result;
-
- /*
- * hey, we are done. let's look to see what happened.
- */
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
__FUNCTION__, scmd, rtn));
- if (rtn == SUCCESS)
- return 0;
- else if (rtn == NEEDS_RETRY) {
+
+ switch (rtn) {
+ case NEEDS_RETRY:
if (retry_cnt--)
goto retry_tur;
+ /*FALLTHRU*/
+ case SUCCESS:
return 0;
+ default:
+ return 1;
}
- return 1;
}
/**
@@ -837,44 +835,16 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
{
static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
- int rtn;
- int saved_result;
- if (!scmd->device->allow_restart)
- return 1;
-
- memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
-
- /*
- * zero the sense buffer. the scsi spec mandates that any
- * untransferred sense data should be interpreted as being zero.
- */
- memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer));
-
- saved_result = scmd->result;
- scmd->request_buffer = NULL;
- scmd->request_bufflen = 0;
- scmd->use_sg = 0;
- scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
- scmd->underflow = 0;
- scmd->sc_data_direction = DMA_NONE;
+ if (scmd->device->allow_restart) {
+ int rtn;
- rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT);
-
- /*
- * when we eventually call scsi_finish, we really wish to complete
- * the original request, so let's restore the original data. (db)
- */
- scsi_setup_cmd_retry(scmd);
- scmd->result = saved_result;
+ memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
+ rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0);
+ if (rtn == SUCCESS)
+ return 0;
+ }
- /*
- * hey, we are done. let's look to see what happened.
- */
- SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
- __FUNCTION__, scmd, rtn));
- if (rtn == SUCCESS)
- return 0;
return 1;
}
@@ -1684,8 +1654,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
scmd->scsi_done = scsi_reset_provider_done_command;
scmd->done = NULL;
- scmd->buffer = NULL;
- scmd->bufflen = 0;
scmd->request_buffer = NULL;
scmd->request_bufflen = 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 08af9aae7df3..077c1c691210 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -436,60 +436,16 @@ EXPORT_SYMBOL_GPL(scsi_execute_async);
*
* Arguments: cmd - command that is ready to be queued.
*
- * Returns: Nothing
- *
* Notes: This function has the job of initializing a number of
* fields related to error handling. Typically this will
* be called once for each command, as required.
*/
-static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
+static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
{
cmd->serial_number = 0;
-
memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
-
if (cmd->cmd_len == 0)
cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
-
- /*
- * We need saved copies of a number of fields - this is because
- * error handling may need to overwrite these with different values
- * to run different commands, and once error handling is complete,
- * we will need to restore these values prior to running the actual
- * command.
- */
- cmd->old_use_sg = cmd->use_sg;
- cmd->old_cmd_len = cmd->cmd_len;
- cmd->sc_old_data_direction = cmd->sc_data_direction;
- cmd->old_underflow = cmd->underflow;
- memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd));
- cmd->buffer = cmd->request_buffer;
- cmd->bufflen = cmd->request_bufflen;
-
- return 1;
-}
-
-/*
- * Function: scsi_setup_cmd_retry()
- *
- * Purpose: Restore the command state for a retry
- *
- * Arguments: cmd - command to be restored
- *
- * Returns: Nothing
- *
- * Notes: Immediately prior to retrying a command, we need
- * to restore certain fields that we saved above.
- */
-void scsi_setup_cmd_retry(struct scsi_cmnd *cmd)
-{
- memcpy(cmd->cmnd, cmd->data_cmnd, sizeof(cmd->data_cmnd));
- cmd->request_buffer = cmd->buffer;
- cmd->request_bufflen = cmd->bufflen;
- cmd->use_sg = cmd->old_use_sg;
- cmd->cmd_len = cmd->old_cmd_len;
- cmd->sc_data_direction = cmd->sc_old_data_direction;
- cmd->underflow = cmd->old_underflow;
}
void scsi_device_unbusy(struct scsi_device *sdev)
@@ -807,22 +763,13 @@ static void scsi_free_sgtable(struct scatterlist *sgl, int index)
*/
static void scsi_release_buffers(struct scsi_cmnd *cmd)
{
- struct request *req = cmd->request;
-
- /*
- * Free up any indirection buffers we allocated for DMA purposes.
- */
if (cmd->use_sg)
scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
- else if (cmd->request_buffer != req->buffer)
- kfree(cmd->request_buffer);
/*
* Zero these out. They now point to freed memory, and it is
* dangerous to hang onto the pointers.
*/
- cmd->buffer = NULL;
- cmd->bufflen = 0;
cmd->request_buffer = NULL;
cmd->request_bufflen = 0;
}
@@ -858,7 +805,7 @@ static void scsi_release_buffers(struct scsi_cmnd *cmd)
void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
{
int result = cmd->result;
- int this_count = cmd->bufflen;
+ int this_count = cmd->request_bufflen;
request_queue_t *q = cmd->device->request_queue;
struct request *req = cmd->request;
int clear_errors = 1;
@@ -866,28 +813,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
int sense_valid = 0;
int sense_deferred = 0;
- /*
- * Free up any indirection buffers we allocated for DMA purposes.
- * For the case of a READ, we need to copy the data out of the
- * bounce buffer and into the real buffer.
- */
- if (cmd->use_sg)
- scsi_free_sgtable(cmd->buffer, cmd->sglist_len);
- else if (cmd->buffer != req->buffer) {
- if (rq_data_dir(req) == READ) {
- unsigned long flags;
- char *to = bio_kmap_irq(req->bio, &flags);
- memcpy(to, cmd->buffer, cmd->bufflen);
- bio_kunmap_irq(to, &flags);
- }
- kfree(cmd->buffer);
- }
+ scsi_release_buffers(cmd);
if (result) {
sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
if (sense_valid)
sense_deferred = scsi_sense_is_deferred(&sshdr);
}
+
if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
req->errors = result;
if (result) {
@@ -908,15 +841,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
}
/*
- * Zero these out. They now point to freed memory, and it is
- * dangerous to hang onto the pointers.
- */
- cmd->buffer = NULL;
- cmd->bufflen = 0;
- cmd->request_buffer = NULL;
- cmd->request_bufflen = 0;
-
- /*
* Next deal with any sectors which we were able to correctly
* handle.
*/
@@ -1012,7 +936,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
if (!(req->flags & REQ_QUIET)) {
scmd_printk(KERN_INFO, cmd,
"Volume overflow, CDB: ");
- __scsi_print_command(cmd->data_cmnd);
+ __scsi_print_command(cmd->cmnd);
scsi_print_sense("", cmd);
}
/* See SSC3rXX or current. */
@@ -1143,7 +1067,7 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
* successfully. Since this is a REQ_BLOCK_PC command the
* caller should check the request's errors value
*/
- scsi_io_completion(cmd, cmd->bufflen);
+ scsi_io_completion(cmd, cmd->request_bufflen);
}
static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index e2fbe9a9d5a9..ae24c85aaeea 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -57,7 +57,6 @@ extern int scsi_eh_scmd_add(struct scsi_cmnd *, int);
/* scsi_lib.c */
extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
-extern void scsi_setup_cmd_retry(struct scsi_cmnd *cmd);
extern void scsi_device_unbusy(struct scsi_device *sdev);
extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
extern void scsi_next_command(struct scsi_cmnd *cmd);
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index dd075627e605..5a625c3fddae 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -41,6 +41,7 @@ struct sas_host_attrs {
struct mutex lock;
u32 next_target_id;
u32 next_expander_id;
+ int next_port_id;
};
#define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data)
@@ -146,6 +147,7 @@ static int sas_host_setup(struct transport_container *tc, struct device *dev,
mutex_init(&sas_host->lock);
sas_host->next_target_id = 0;
sas_host->next_expander_id = 0;
+ sas_host->next_port_id = 0;
return 0;
}
@@ -327,7 +329,7 @@ sas_phy_protocol_attr(identify.target_port_protocols,
sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
unsigned long long);
sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
-//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8);
+//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", int);
sas_phy_linkspeed_attr(negotiated_linkrate);
sas_phy_linkspeed_attr(minimum_linkrate_hw);
sas_phy_linkspeed_attr(minimum_linkrate);
@@ -590,6 +592,38 @@ struct sas_port *sas_port_alloc(struct device *parent, int port_id)
}
EXPORT_SYMBOL(sas_port_alloc);
+/** sas_port_alloc_num - allocate and initialize a SAS port structure
+ *
+ * @parent: parent device
+ *
+ * Allocates a SAS port structure and a number to go with it. This
+ * interface is really for adapters where the port number has no
+ * meansing, so the sas class should manage them. It will be added to
+ * the device tree below the device specified by @parent which must be
+ * either a Scsi_Host or a sas_expander_device.
+ *
+ * Returns %NULL on error
+ */
+struct sas_port *sas_port_alloc_num(struct device *parent)
+{
+ int index;
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
+
+ /* FIXME: use idr for this eventually */
+ mutex_lock(&sas_host->lock);
+ if (scsi_is_sas_expander_device(parent)) {
+ struct sas_rphy *rphy = dev_to_rphy(parent);
+ struct sas_expander_device *exp = rphy_to_expander_device(rphy);
+
+ index = exp->next_port_id++;
+ } else
+ index = sas_host->next_port_id++;
+ mutex_unlock(&sas_host->lock);
+ return sas_port_alloc(parent, index);
+}
+EXPORT_SYMBOL(sas_port_alloc_num);
+
/**
* sas_port_add - add a SAS port to the device hierarchy
*
@@ -658,6 +692,13 @@ void sas_port_delete(struct sas_port *port)
}
mutex_unlock(&port->phy_list_mutex);
+ if (port->is_backlink) {
+ struct device *parent = port->dev.parent;
+
+ sysfs_remove_link(&port->dev.kobj, parent->bus_id);
+ port->is_backlink = 0;
+ }
+
transport_remove_device(dev);
device_del(dev);
transport_destroy_device(dev);
@@ -733,6 +774,19 @@ void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy)
}
EXPORT_SYMBOL(sas_port_delete_phy);
+void sas_port_mark_backlink(struct sas_port *port)
+{
+ struct device *parent = port->dev.parent->parent->parent;
+
+ if (port->is_backlink)
+ return;
+ port->is_backlink = 1;
+ sysfs_create_link(&port->dev.kobj, &parent->kobj,
+ parent->bus_id);
+
+}
+EXPORT_SYMBOL(sas_port_mark_backlink);
+
/*
* SAS remote PHY attributes.
*/
@@ -1140,7 +1194,7 @@ int sas_rphy_add(struct sas_rphy *rphy)
if (identify->device_type == SAS_END_DEVICE &&
rphy->scsi_target_id != -1) {
- scsi_scan_target(&rphy->dev, parent->port_identifier,
+ scsi_scan_target(&rphy->dev, 0,
rphy->scsi_target_id, ~0, 0);
}
@@ -1242,15 +1296,13 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
mutex_lock(&sas_host->lock);
list_for_each_entry(rphy, &sas_host->rphy_list, list) {
- struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
-
if (rphy->identify.device_type != SAS_END_DEVICE ||
rphy->scsi_target_id == -1)
continue;
- if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
+ if ((channel == SCAN_WILD_CARD || channel == 0) &&
(id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) {
- scsi_scan_target(&rphy->dev, parent->port_identifier,
+ scsi_scan_target(&rphy->dev, 0,
rphy->scsi_target_id, lun, 1);
}
}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3225d31449e1..98bd3aab9739 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -502,8 +502,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt)
SCpnt->cmnd[4] = (unsigned char) this_count;
SCpnt->cmnd[5] = 0;
}
- SCpnt->request_bufflen = SCpnt->bufflen =
- this_count * sdp->sector_size;
+ SCpnt->request_bufflen = this_count * sdp->sector_size;
/*
* We shouldn't disconnect in the middle of a sector, so with a dumb
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index 3f312a84c6a7..2679ea8bff1a 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -1002,7 +1002,7 @@ connect_loop:
}
#endif
- buffer = (struct scatterlist *) SCint->buffer;
+ buffer = (struct scatterlist *) SCint->request_buffer;
len = buffer->length;
data = page_address(buffer->page) + buffer->offset;
} else {
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index fd94408577e5..fae6e95a6298 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -360,7 +360,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt)
"mismatch count %d, bytes %d\n",
size, SCpnt->request_bufflen);
if (SCpnt->request_bufflen > size)
- SCpnt->request_bufflen = SCpnt->bufflen = size;
+ SCpnt->request_bufflen = size;
}
}
@@ -387,8 +387,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt)
if (this_count > 0xffff) {
this_count = 0xffff;
- SCpnt->request_bufflen = SCpnt->bufflen =
- this_count * s_size;
+ SCpnt->request_bufflen = this_count * s_size;
}
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 756ceb93ddc8..7f669b600677 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -368,7 +368,7 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
if (cmdstatp->have_sense)
- __scsi_print_sense("st", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
+ __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
} ) /* end DEB */
if (!debugging) { /* Abnormal conditions for tape */
if (!cmdstatp->have_sense)
@@ -384,9 +384,8 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
scode != VOLUME_OVERFLOW &&
SRpnt->cmd[0] != MODE_SENSE &&
SRpnt->cmd[0] != TEST_UNIT_READY) {
- printk(KERN_WARNING "%s: Error with sense data: ", name);
- __scsi_print_sense("st", SRpnt->sense,
- SCSI_SENSE_BUFFERSIZE);
+
+ __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
}
}
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 2ebe0d663899..2f8073b73bf3 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -517,7 +517,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd)
*/
if (cmd->use_sg) {
- cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+ cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
cmd->SCp.buffers_residual = cmd->use_sg - 1;
cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer);
cmd->SCp.this_residual = cmd->SCp.buffer->length;
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 1f328cae5c05..6b60536ac92b 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -347,7 +347,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
int sz = sp->use_sg - 1;
- struct scatterlist *sg = (struct scatterlist *)sp->buffer;
+ struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
while(sz >= 0) {
dvma_unmap((char *)sg[sz].dma_address);
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 680f38ab60d8..2083454db511 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -373,7 +373,7 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd,
*/
if (cmd->use_sg) {
- cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+ cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
cmd->SCp.buffers_residual = cmd->use_sg - 1;
cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) +
cmd->SCp.buffer->offset;