diff options
Diffstat (limited to 'drivers/soc/ti')
| -rw-r--r-- | drivers/soc/ti/wkup_m3_ipc.c | 93 |
1 files changed, 92 insertions, 1 deletions
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index 2f2a0ab32aff..84e9534056f8 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -8,6 +8,7 @@ */ #include <linux/err.h> +#include <linux/firmware.h> #include <linux/kernel.h> #include <linux/kthread.h> #include <linux/interrupt.h> @@ -55,6 +56,12 @@ #define M3_STATE_MSG_FOR_LP 3 #define M3_STATE_MSG_FOR_RESET 4 +#define WKUP_M3_SD_FW_MAGIC 0x570C + +#define WKUP_M3_DMEM_START 0x80000 +#define WKUP_M3_AUXDATA_OFFSET 0x1000 +#define WKUP_M3_AUXDATA_SIZE 0xFF + static struct wkup_m3_ipc *m3_ipc_state; static const struct wkup_m3_wakeup_src wakeups[] = { @@ -75,6 +82,81 @@ static const struct wkup_m3_wakeup_src wakeups[] = { {.irq_nr = 0, .src = "Unknown"}, }; +/** + * wkup_m3_copy_aux_data - Copy auxiliary data to special region of m3 dmem + * @data - pointer to data + * @sz - size of data to copy (limit 256 bytes) + * + * Copies any additional blob of data to the wkup_m3 dmem to be used by the + * firmware + */ +static unsigned long wkup_m3_copy_aux_data(struct wkup_m3_ipc *m3_ipc, + const void *data, int sz) +{ + unsigned long aux_data_dev_addr; + void *aux_data_addr; + + aux_data_dev_addr = WKUP_M3_DMEM_START + WKUP_M3_AUXDATA_OFFSET; + aux_data_addr = rproc_da_to_va(m3_ipc->rproc, + aux_data_dev_addr, + WKUP_M3_AUXDATA_SIZE, + NULL); + memcpy(aux_data_addr, data, sz); + + return WKUP_M3_AUXDATA_OFFSET; +} + +static void wkup_m3_scale_data_fw_cb(const struct firmware *fw, void *context) +{ + unsigned long val, aux_base; + struct wkup_m3_scale_data_header hdr; + struct wkup_m3_ipc *m3_ipc = context; + struct device *dev = m3_ipc->dev; + + if (!fw) { + dev_err(dev, "Voltage scale fw name given but file missing.\n"); + return; + } + + memcpy(&hdr, fw->data, sizeof(hdr)); + + if (hdr.magic != WKUP_M3_SD_FW_MAGIC) { + dev_err(dev, "PM: Voltage Scale Data binary does not appear valid.\n"); + goto release_sd_fw; + } + + aux_base = wkup_m3_copy_aux_data(m3_ipc, fw->data + sizeof(hdr), + fw->size - sizeof(hdr)); + + val = (aux_base + hdr.sleep_offset); + val |= ((aux_base + hdr.wake_offset) << 16); + + m3_ipc->volt_scale_offsets = val; + +release_sd_fw: + release_firmware(fw); +}; + +static int wkup_m3_init_scale_data(struct wkup_m3_ipc *m3_ipc, + struct device *dev) +{ + int ret = 0; + + /* + * If no name is provided, user has already been warned, pm will + * still work so return 0 + */ + + if (!m3_ipc->sd_fw_name) + return ret; + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + m3_ipc->sd_fw_name, dev, GFP_ATOMIC, + m3_ipc, wkup_m3_scale_data_fw_cb); + + return ret; +} + static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc) { writel(AM33XX_M3_TXEV_ACK, @@ -139,6 +221,7 @@ static irqreturn_t wkup_m3_txev_handler(int irq, void *ipc_data) } m3_ipc->state = M3_STATE_INITED; + wkup_m3_init_scale_data(m3_ipc, dev); complete(&m3_ipc->sync_complete); break; case M3_STATE_MSG_FOR_RESET: @@ -300,12 +383,15 @@ static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state) switch (state) { case WKUP_M3_DEEPSLEEP: m3_power_state = IPC_CMD_DS0; + wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->volt_scale_offsets, 5); break; case WKUP_M3_STANDBY: m3_power_state = IPC_CMD_STANDBY; + wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5); break; case WKUP_M3_IDLE: m3_power_state = IPC_CMD_IDLE; + wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5); break; default: return 1; @@ -319,7 +405,6 @@ static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state) m3_ipc->isolation_conf, 4); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 3); - wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 6); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 7); @@ -526,6 +611,12 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) if (of_find_property(np, "ti,set-io-isolation", NULL)) wkup_m3_set_io_isolation(m3_ipc); + ret = of_property_read_string(np, "firmware-name", + &m3_ipc->sd_fw_name); + if (ret) { + dev_dbg(dev, "Voltage scaling data blob not provided from DT.\n"); + }; + /* * Wait for firmware loading completion in a thread so we * can boot the wkup_m3 as soon as it's ready without holding |