diff options
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/spi-atmel.c | 12 | ||||
-rw-r--r-- | drivers/spi/spi-dw-mid.c | 6 | ||||
-rw-r--r-- | drivers/spi/spi-dw-pci.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi-dw.c | 4 | ||||
-rw-r--r-- | drivers/spi/spi-img-spfi.c | 7 | ||||
-rw-r--r-- | drivers/spi/spi-pl022.c | 2 | ||||
-rw-r--r-- | drivers/spi/spi-ti-qspi.c | 22 |
7 files changed, 46 insertions, 11 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 9af7841f2e8c..06de34001c66 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -764,17 +764,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master, (unsigned long long)xfer->rx_dma); } - /* REVISIT: We're waiting for ENDRX before we start the next + /* REVISIT: We're waiting for RXBUFF before we start the next * transfer because we need to handle some difficult timing - * issues otherwise. If we wait for ENDTX in one transfer and - * then starts waiting for ENDRX in the next, it's difficult - * to tell the difference between the ENDRX interrupt we're - * actually waiting for and the ENDRX interrupt of the + * issues otherwise. If we wait for TXBUFE in one transfer and + * then starts waiting for RXBUFF in the next, it's difficult + * to tell the difference between the RXBUFF interrupt we're + * actually waiting for and the RXBUFF interrupt of the * previous transfer. * * It should be doable, though. Just not now... */ - spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); + spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES)); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index a0197fd4e95c..3ce39d10fafb 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -139,6 +139,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws) 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) + return NULL; + txdesc->callback = dw_spi_dma_tx_done; txdesc->callback_param = dws; @@ -184,6 +187,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws) 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!rxdesc) + return NULL; + rxdesc->callback = dw_spi_dma_rx_done; rxdesc->callback_param = dws; diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 5ba331047cbe..6d331e0db331 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -36,13 +36,13 @@ struct spi_pci_desc { static struct spi_pci_desc spi_pci_mid_desc_1 = { .setup = dw_spi_mid_init, - .num_cs = 32, + .num_cs = 5, .bus_num = 0, }; static struct spi_pci_desc spi_pci_mid_desc_2 = { .setup = dw_spi_mid_init, - .num_cs = 4, + .num_cs = 2, .bus_num = 1, }; diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 5a97a62b298a..4847afba89f4 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -621,14 +621,14 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws) if (!dws->fifo_len) { u32 fifo; - for (fifo = 2; fifo <= 256; fifo++) { + for (fifo = 1; fifo < 256; fifo++) { dw_writew(dws, DW_SPI_TXFLTR, fifo); if (fifo != dw_readw(dws, DW_SPI_TXFLTR)) break; } dw_writew(dws, DW_SPI_TXFLTR, 0); - dws->fifo_len = (fifo == 2) ? 0 : fifo - 1; + dws->fifo_len = (fifo == 1) ? 0 : fifo; dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len); } } diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index c01567d53581..e649bc7d4c08 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -459,6 +459,13 @@ static int img_spfi_transfer_one(struct spi_master *master, unsigned long flags; int ret; + if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) { + dev_err(spfi->dev, + "Transfer length (%d) is greater than the max supported (%d)", + xfer->len, SPFI_TRANSACTION_TSIZE_MASK); + return -EINVAL; + } + /* * Stop all DMA and reset the controller if the previous transaction * timed-out and never completed it's DMA. diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 89ca162801da..ee513a85296b 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -534,12 +534,12 @@ static void giveback(struct pl022 *pl022) pl022->cur_msg = NULL; pl022->cur_transfer = NULL; pl022->cur_chip = NULL; - spi_finalize_current_message(pl022->master); /* disable the SPI/SSP operation */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); + spi_finalize_current_message(pl022->master); } /** diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 884a716e50cb..5c0616870358 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -101,6 +101,7 @@ struct ti_qspi { #define QSPI_FLEN(n) ((n - 1) << 0) /* STATUS REGISTER */ +#define BUSY 0x01 #define WC 0x02 /* INTERRUPT REGISTER */ @@ -199,6 +200,21 @@ static void ti_qspi_restore_ctx(struct ti_qspi *qspi) ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG); } +static inline u32 qspi_is_busy(struct ti_qspi *qspi) +{ + u32 stat; + unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT; + + stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); + while ((stat & BUSY) && time_after(timeout, jiffies)) { + cpu_relax(); + stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); + } + + WARN(stat & BUSY, "qspi busy\n"); + return stat & BUSY; +} + static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t) { int wlen, count; @@ -211,6 +227,9 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t) wlen = t->bits_per_word >> 3; /* in bytes */ while (count) { + if (qspi_is_busy(qspi)) + return -EBUSY; + switch (wlen) { case 1: dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n", @@ -266,6 +285,9 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t) while (count) { dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc); + if (qspi_is_busy(qspi)) + return -EBUSY; + ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); if (!wait_for_completion_timeout(&qspi->transfer_complete, QSPI_COMPLETION_TIMEOUT)) { |